Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ; TRUNK88 Rev. 4.89W Copyright 1998-2015 W. A. Porrett (wap@ica.net / slicerwizard@gmail.com); Master control file
- ;;[Settings]
- Improper Termination = 1
- ; device types: 0=WaveIn (sound card/dongle), 1=serial port (scanner CC dump), 2=SDR:
- CC Device Type = 2
- Audio Input Device Number = 0
- Audio Input Sampling Rate = 48000
- Audio Input Bits Per Sample = 16
- ; Input channel: 0=mono; 1=right(ring), 2=left(tip)
- Audio Input Channel = 0
- Audio Buffer Size = 10
- CC Data Serial Port = 0
- CC SDR Device Number = 1
- CC SDR PP10M Correction = 0
- CC SDR Auto Correction = 1
- CC SDR RF Gain = 99
- CC SDR Narrow Filter = 1
- CC SDR Tuning Rate = 10
- CC SDR Local Scan Watchdog = 50
- CC SDR Neighbour Scan Watchdog = 90
- CC SDR Full Scan Watchdog = 160
- CC SDR Spectrum Location = 119, -2
- CC SDR Spectrum Topmost = 0
- CC SDR Spectrum 10 dB = 0, 0, 0
- CC SDR Spectrum Step = 0.0
- CC SDR Spectrum Show In Taskbar = 0
- CC Audio Location = 1, 0
- CC Audio Topmost = 0
- CC Audio Show In Taskbar = 0
- Number of Receivers = 2
- ; supported receivers: 10, 245, 246, 396, 500, 535, 780, 785, 895, 996, 2832, 8500, 9000, 9500:
- Voice Receiver Model = 2832
- Voice Receiver Serial Port = 0
- Voice Receiver Baud Rate = 0
- Voice Receiver Address = 0
- Voice Receiver P25 Enabled = 1
- Voice Receiver Park Frequency = 0.0000
- Voice Receiver Park Modulation = NFM
- Voice Receiver Online Keypad Beep = 0
- Voice Receiver Offline Keypad Beep = 2
- Voice Receiver Low Battery Warning = 1
- VC SDR Device Number = 2
- VC SDR PP10M Correction = 0
- VC SDR Auto Correction = 1
- VC SDR RF Gain = 99
- VC SDR Narrow Filter = 1
- VC SDR Squelch Level = 20
- VC SDR End Code Detect = 1
- VC SDR Audio Output Device Number = 1
- VC SDR P25 Audio Output Device Number = 0
- VC SDR Alternate Noise Filter = 0
- VC SDR LSD Filter = 1
- VC SDR Audio AGC = 0
- VC SDR Max AGC Boost = 0
- VC SDR Volume Level = 100
- VC SDR Spectrum Location = 238, -2
- VC SDR Spectrum Topmost = 0
- VC SDR Spectrum 10 dB = 0, 0, 0
- VC SDR Spectrum Step = 0.0
- VC SDR Spectrum Show In Taskbar = 0
- Traffic Location = 357, -2
- Traffic Topmost = 0
- Traffic Pin Right = 0
- Traffic Background = 0, 0, 0
- Traffic Show In Taskbar = 0
- Use Pointing Device = 1
- Confirm Quit = 1
- Include Defaulted Entries = 0
- Run Mode = 69
- ; TRUNK88 defaults:
- ; Systype: 1=T1 800; 2=T2 800; 4=Hybrid/IIi 800; 8=900; 16=VHF/UHF; 31=unknown:
- System Type = 31
- Background AutoSave Interval = 10
- Show Path In Title Bar = 0
- Show Voice Receiver In Title Bar = 1
- Mono Mode = 0
- Inverse Mono Mode = 0
- Display '0' as 'O' = 1
- High Visibility Cursor = 1
- Text Size = 0
- Screen Lines = 60
- Screen Columns = 100
- Auto-Adjust Layout = 1
- ; DAC reprogramming (red%, green%, blue%); 0,0,0 = use system default color:
- Color0 = 0, 0, 0
- Color1 = 0, 0, 50
- Color2 = 0, 50, 0
- Color3 = 60, 80, 60
- Color4 = 50, 0, 0
- Color5 = 27, 27, 27
- Color6 = 50, 50, 0
- Color7 = 75, 75, 75
- Color8 = 50, 50, 50
- Color9 = 0, 0, 100
- Color10 = 0, 100, 0
- Color11 = 0, 100, 100
- Color12 = 100, 0, 0
- Color13 = 55, 47, 31
- Color14 = 100, 100, 0
- Color15 = 100, 100, 100
- ; backgrounds (color, row, column, height, width):
- Area #1 = 0, 1, 1, 100, 100
- Area #2 = 6, 1, 1, 3, 100
- Area #3 = 0, 4, 1, 1, 100
- Area #4 = 13, 17, 1, 40, 85
- Area #5 = 7, 57, 1, 3, 100
- Area #6 = 3, 60, 1, 1, 100
- Area #7 = 0, 0, 0, 0, 0
- Area #8 = 0, 0, 0, 0, 0
- Area #9 = 0, 0, 0, 0, 0
- Area #10 = 0, 0, 0, 0, 0
- Area #11 = 0, 0, 0, 0, 0
- Area #12 = 0, 0, 0, 0, 0
- Area #13 = 0, 0, 0, 0, 0
- Area #14 = 0, 0, 0, 0, 0
- Area #15 = 0, 0, 0, 0, 0
- Area 51 = 5, 7, 1, 10, 85
- ; display parameters (color, row, column, width; width=0 suppresses field):
- "TRUNK88" = 11, 1, 41, 7
- "Cur Acc:" = 11, 1, 87, 8
- Cur Acc = 15, 1, 95, 4
- "Avg Acc:" = 11, 2, 87, 8
- Avg Acc = 15, 2, 95, 4
- "NL:" = 11, 3, 88, 3
- Noise Level = 15, 3, 91, 2
- "DL:" = 11, 3, 95, 3
- Distortion Level = 15, 3, 98, 2
- "SysID:" = 0, 2, 1, 6
- SysID Text = 14, 2, 8, 4
- "Zone:" = 0, 3, 1, 5
- Zone Number = 11, 3, 7, 9
- "Zone Name:" = 0, 0, 0, 0
- Zone Name = 15, 3, 17, 27
- "System:" = 0, 1, 1, 7
- System Name = 7, 1, 9, 31
- System Date = 7, 2, 65, 8
- System Time = 7, 2, 75, 5
- Local Date = 15, 1, 63, 11
- Local Time = 15, 1, 75, 8
- "Mode:" = 0, 2, 32, 5
- Monitoring Mode Display = 14, 2, 38, 26
- "Banks:" = 0, 3, 45, 6
- Banks Display = 11, 3, 52, 34
- Audio Level Meter = 10, 56, 86, 50, 254 ; color, row, column, height, ASCII
- S-Meter = 13, 56, 87, 50, 254 ; color, row, column, height, ASCII
- Pending Commands Meter = 5, 56, 88, 50, 254 ; color, row, column, height, ASCII
- Channel Headings = 15, 4, 1, 196
- Output Channel Number = 15, 6, 1, 0
- Output Frequency = 14, 4, 8 ; color, column, width
- Input Channel Number = 0, 0, 0 ; color, column, width
- Input Frequency = 0, 0, 0 ; color, column, width
- Physical Channel Number = 7, 1, 2 ; color, column, width
- PCC Marker = 15, 13, 1 ; color, column, width
- ACC Marker = 15, 13, 1 ; color, column, width
- Voice Comms Spinner = 10, 13, 1 ; color, column, width
- Comms Priority = 3, 15, 2 ; color, column, width
- TG Banks = 15, 17, 2 ; color, column, width
- Talkgroup Size = 11, 20, 6 ; color, column, width
- Comms Status = 7, 26, 1 ; color, column, width
- BSI Marker = 15, 27, 3 ; color, column, width
- Talkgroup Name = 14, 27, 28 ; color, column, width
- Talkgroup Number = 14, 56, 5 ; color, column, width
- Alternate Format Talkgroup Number = 0, 0, 0 ; color, column, width
- Call Type = 111, 62, 1 ; color, column, width
- Analog Marker = 10, 63, 65 ; color, column, ASCII
- Digital Marker = 111, 63, 68 ; color, column, ASCII
- Private Call Marker = 115, 64, 15 ; color, column, ASCII
- RadioID = 10, 65, 5 ; color, column, width
- Radio Name = 10, 71, 30 ; color, column, width
- Comms Status2 = 7, 70, 1 ; color, column, width
- FG Activity Display = 15, 7, 1, 10, 85 ; color, row, column, height, width
- BG Activity Display = 15, 17, 1, 40, 85 ; color, row, column, height, width
- Datastream Display = 7, 7, 90, 50, 14 ; color, row, column, height, softcolor
- User Input = 0, 57, 11, 4 ; prompt color, row, column, input color
- Error/Warning Messages = 0, 60, 11, 80
- "BG Activity Logging On" = 2, 57, 4, 2
- "FG Activity Logging On" = 2, 58, 4, 2
- "OSW Logging On" = 2, 59, 4, 3
- Shift States Display = 0, 60, 89, 12
- Spinner = 14, 60, 86, 1
- Datastream Marker Color = 0
- Roamer RID Color = 10
- Stale Comms Color = 6
- PCC Color = 10
- ACC Color = 11
- Disabled Channel Color = 12
- Malfunctioning Channel Color = 112
- Inactive Channel Color = 13
- Inactive Channel Timeout = 200
- Affiliation Timeout Period = 4
- "Interconnect" Color = 115
- "Sitewide Announcement" Color = 115
- Expired Comms Color = 0
- Expired Comms Timeout = 0
- ; Background Display Highlighting (<0,0>=default):
- Zone ID Colors = 14, 3
- Neighbour List Colors = 15, 6
- System Status Colors = 10, 0
- Patch/MSEL Colors = 11, 5
- Patch/MSEL Termination Colors = 13, 5
- Affiliation Colors = 0, 13
- Deaffiliation Colors = 5, 13
- Affiliation Request Colors = 14, 6
- Affiliation Summary Primary Colors = 5, 13
- Affiliation Summary Secondary Colors = 0, 13
- Emergency Colors = 114, 4
- Busy Colors = 14, 4
- Failure Diagnostic Colors = 114, 4
- Disable Diagnostic Colors = 15, 4
- Other Diagnostic Colors = 15, 2
- Soft Rejection Colors = 0, 0
- Rejection Colors = 12, 4
- Radio Message Colors = 0, 0
- Processing Colors = 0, 0
- Patch/MSEL Timeout = 10
- Show Patch/MSEL Names = 1
- Invert Tuned Comms = 3
- Flash Tuned Comms = 0
- File Timestamp Size = 5
- Sort Radios By Talkgroup = 1
- Sort By Timestamp = 0
- Create Radio CSV = 0
- Simple CSV Format = 0
- Include Alias Text In Radio CSV = 0
- Include Timestamps In Radio CSV = 0
- Include Current Affiliations In Radio CSV = 0
- ; 0=hex, 1=hex w/leading zeroes, 2=decimal, 3=dec w/leading '8', 4=TT decimal:
- Talkgroup Display Format = 2
- Alternate Talkgroup Display Format = 4
- ; 0=hex, 1=hex w/leading zeroes, 2=decimal, 3=dec w/leading '7':
- Radio ID Display Format = 2
- Alternate Radio ID Display Format = 0
- Descending Priorities = 0
- Relaxed Voice Comms Filtering = 1
- Relaxed SmartZone Filtering = 1
- Relaxed Zone Data Acquisition Filtering = 1
- Relaxed Diagnostics Filtering = 1
- Lock Channel List = 0
- Display 28 Channel Diagnostics = 1
- ; indexes of specific OSW sequences to discard; contact author for specific indexes
- Ignore Command #1 = 0
- Ignore Command #2 = 0
- Ignore Command #3 = 0
- Ignore Command #4 = 0
- Ignore Command #5 = 0
- Ignore Command #6 = 0
- Ignore Command #7 = 0
- Ignore Command #8 = 0
- Ignore Command #9 = 0
- Ignore Command #10 = 0
- ; 0=ssss-mdd, 1=ssss-yyyymdd, 2=ssss-mdd yyyy, 3=ssss_yyyy-mm-dd
- Log File Name Format = 0
- Detailed FG/BG Logging = 1
- Detailed Comms Logging = 0
- Detailed Deaffiliation Messages = 1
- OSW Datastream Viewing = 1
- FG Activity Logging = 1
- BG Activity Logging = 1
- Debug Console Logging = 0
- OSW Logging = 1
- Verbose SS/NS Messages = 1
- Add New RIDs On Affiliation Or PTT Only = 0
- Update Radio Timestamps On All Events = 1
- ; enabled in single receiver mode only; 0=no decode, 1=mute & decode, 2=unmute & decode:
- Decode BSI = 2
- Annotate Roamers = 1
- Annotate Analog Comms = 0
- Annotate Digital Comms = 1
- Annotate Clear Comms = 0
- Annotate Secure Comms = 1
- Signal Reporting Interval = 0
- Sync Clock To System = 0
- FGA Allocation = 20
- ; valid sizes: 0 (no timestamp), 4 (HHMM), 6 (HHMMSS), 8 (HH:MM:SS)
- FGA Timestamp Size = 0
- FGA Use Talkgroup Colors = 1
- FGA Scroll Down = 1
- BGA Timestamp Size = 8
- BGA Scroll Down = 0
- Suppress Affiliation/PTT Timeout Messages = 0
- ; audible alerts parameters:
- Audio Output Device Number = 0
- Master Volume = 0
- ; specific alerts (frequency, period in ms, volume (normally 0-100%)):
- Keyboard Beep = 1000, 500, 0
- New Channel Alert = 500, 100, 0
- New Talkgroup Alert = 800, 100, 0
- New Radio Alert = 300, 100, 0
- New Radio To Talkgroup Association Alert = 0, 0, 0
- Analog Comms Alert = 0, 0, 0
- Digital Comms Alert = 0, 0, 0
- Clear Comms Alert = 0, 0, 0
- Secure Comms Alert = 0, 0, 0
- Flagged Talkgroup Alert = 4000, 100, 0
- Flagged Radio Alert = 5000, 100, 0
- Page Alert = 0, 0, 0
- Private Call Alert = 400, 300, 0
- Interconnect Alert = 400, 300, 0
- Roamer Activity Alert = 0, 0, 0
- Sitewide Call Alert = 400, 300, 0
- Emergency Alert = 750, 1000, 0
- Emergency Clear Alert = 1500, 500, 0
- ATB Alert = 90, 100, 0
- System Busy Alert = 120, 200, 0
- BSI Start Alert = 3000, 100, 0
- BSI End Alert = 4000, 100, 0
- System Diagnostic Alert = 150, 500, 0
- Enable Diagnostic Alert = 300, 250, 0
- Status Change Alert = 4000, 500, 0
- Failsoft Alert = 50, 1000, 0
- Site Trunking Alert = 60, 1000, 0
- Wide Area Trunking Alert = 200, 500, 0
- Unknown OSW Alert = 0, 0, 0
- CC Hunt Start Alert = 200, 200, 0
- CC Hunt End Alert = 440, 200, 0
- Control Channel Monitor Volume = 50
- Poor Control Channel Decoding Threshold = 75
- Poor Control Channel Decoding Alert = 2000, 1000, 0
- Voice Receiver Low Battery Alert = 500, 50, 0
- ; scanner control:
- F10 Granularity = 10
- Cutoff Priority = 0
- New Talkgroup Priority = 50
- ; bank assigned to new TGs (0 = none, 1 through 32 = A-Z, 1-6):
- New Talkgroup Bank = 21
- New Radio Priority = 0
- ; Timing units are 1/10 second (max value = 6000 [10 min]):
- Control Latch Time = 10
- Control Hang Time = 20
- Control Monitoring Time = 10
- Conventional Scan Time = 0
- Conventional Hang Time = 0
- Conventional Watchdog Time = 600
- Trunk Latch Time = 3
- Trunk Hang Time = 2
- Trunk Watchdog Time = 600
- TG Delay Time = 20
- Default To Soft Hold = 0
- Hold Alert = 100, 100, 0
- Hold Alert Interval = 60
- ; output bandplan ranges (base frequency, step size, offset / base channel number):
- ; 800 MHz Rebanded Bandplan
- Bandplan Range #1 = 851.0125 25.0 0
- Bandplan Range #2 = 851.0250 25.0 440
- Bandplan Range #3 = 865.0125 25.0 560
- Bandplan Range #4 = 866.0000 25.0 720
- Bandplan Range #5 = 867.0000 25.0 815
- Bandplan Range #6 = 868.9750 25.0 958
- Bandplan Range #7 = 867.4250 25.0 961
- ; VHF/UHF input bandplan ranges (base frequency, step size, offset / base channel number):
- Input Bandplan Range #1 = 0.0000 0.0 0
- Input Bandplan Range #2 = 0.0000 0.0 0
- Input Bandplan Range #3 = 0.0000 0.0 0
- ;;[System Files]
- ; system control files (SysID[+SysID][+SysID][+SysID], control file name):
- 092C, "092C.CTL"
- ;;[EOF]
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement