API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Nov 16th, 2022
104
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 28.12 KB | None | 0 0
raw download clone embed print report
  1. U-Boot SPL 2019.04.1-+g0353addb55 (Sep 30 2021 - 19:15:59 +0000)
  2. power_bd71837_init
  3. Board id: 6
  4. DDRINFO: start DRAM init
  5. DDRINFO:ddrphy calibration done
  6. DDRINFO: ddrmix config done
  7. Normal Boot
  8. Trying to boot from MMC2
  9. hdr read sector 300, count=1
  10.  
  11.  
  12. U-Boot 2019.04.1-+g0353addb55 (Sep 30 2021 - 19:15:59 +0000)
  13.  
  14. CPU: Freescale i.MX8MQ rev2.1 1500 MHz (running at 1000 MHz)
  15. CPU: Commercial temperature grade (0C to 95C) at 36C
  16. Reset cause: POR
  17. Model: Freescale i.MX8MQ Phanbell
  18. DRAM: 1 GiB
  19. MMC: FSL_SDHC: 0, FSL_SDHC: 1
  20. Loading Environment from MMC... *** Warning - bad CRC, using default environment
  21.  
  22. In: serial
  23. Out: serial
  24. Err: serial
  25.  
  26. BuildInfo:
  27. - ATF c688807
  28. - U-Boot 2019.04.1-+g0353addb55
  29.  
  30. flash target is MMC:0
  31. Net:
  32. Warning: ethernet@30be0000 using MAC address from ROM
  33. eth0: ethernet@30be0000
  34. Fastboot: Normal
  35. Normal Boot
  36. Hit any key to stop autoboot: 0
  37. 1713 bytes read in 11 ms (151.4 KiB/s)
  38. ## Executing script at 40480000
  39. 33630720 bytes read in 2457 ms (13.1 MiB/s)
  40. 33521 bytes read in 12 ms (2.7 MiB/s)
  41. ## Flattened Device Tree blob at 43000000
  42. Booting using the fdt blob at 0x43000000
  43. Using Device Tree in place at 0000000043000000, end 000000004300bfff
  44.  
  45. Starting kernel ...
  46.  
  47. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  48. [ 0.000000] Linux version 5.15.78-fslc+g97c2965ca430 (oe-user@oe-host) (aarch64-fslc-linux-gcc (GCC) 11.3.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Sun Nov 13 15:09:41 UTC 2022
  49. [ 0.000000] Machine model: Google i.MX8MQ Phanbell
  50. [ 0.000000] earlycon: ec_imx6q0 at MMIO 0x0000000030860000 (options '115200')
  51. [ 0.000000] printk: bootconsole [ec_imx6q0] enabled
  52. [ 0.000000] efi: UEFI not found.
  53. [ 0.000000] NUMA: No NUMA configuration found
  54. [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000007fffffff]
  55. [ 0.000000] NUMA: NODE_DATA [mem 0x7fdd2c00-0x7fdd4fff]
  56. [ 0.000000] Zone ranges:
  57. [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff]
  58. [ 0.000000] DMA32 empty
  59. [ 0.000000] Normal empty
  60. [ 0.000000] Movable zone start for each node
  61. [ 0.000000] Early memory node ranges
  62. [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]
  63. [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
  64. [ 0.000000] cma: Reserved 32 MiB at 0x000000007cc00000
  65. [ 0.000000] psci: probing for conduit method from DT.
  66. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  67. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  68. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  69. [ 0.000000] psci: SMC Calling Convention v1.2
  70. [ 0.000000] percpu: Embedded 20 pages/cpu s41560 r8192 d32168 u81920
  71. [ 0.000000] Detected VIPT I-cache on CPU0
  72. [ 0.000000] CPU features: detected: GIC system register CPU interface
  73. [ 0.000000] CPU features: detected: ARM erratum 845719
  74. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048
  75. [ 0.000000] Policy zone: DMA
  76. [ 0.000000] Kernel command line: console=ttymxc0,115200 console=tty0 earlycon=ec_imx6q,0x30860000,115200 root=/dev/mmcblk1p2 rootfstype=ext4 rw rootwait init=/sbin/init net.ifnames=0 pci=pcie_bus_perf
  77. [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
  78. [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
  79. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  80. [ 0.000000] Memory: 961896K/1048576K available (15168K kernel code, 3082K rwdata, 8248K rodata, 6208K init, 498K bss, 53912K reserved, 32768K cma-reserved)
  81. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  82. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  83. [ 0.000000] rcu: RCU event tracing is enabled.
  84. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
  85. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  86. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  87. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  88. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  89. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  90. [ 0.000000] GICv3: 128 SPIs implemented
  91. [ 0.000000] GICv3: 0 Extended SPIs implemented
  92. [ 0.000000] GICv3: Distributor has no Range Selector support
  93. [ 0.000000] Root IRQ handler: gic_handle_irq
  94. [ 0.000000] GICv3: 16 PPIs implemented
  95. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000038880000
  96. [ 0.000000] ITS: No ITS available, not enabling LPIs
  97. [ 0.000000] arch_timer: cp15 timer(s) running at 8.33MHz (phys).
  98. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1ec0311ec, max_idle_ns: 440795202152 ns
  99. [ 0.000000] sched_clock: 56 bits at 8MHz, resolution 120ns, wraps every 2199023255541ns
  100. [ 0.009020] Console: colour dummy device 80x25
  101. [ 0.012469] printk: console [tty0] enabled
  102. [ 0.016571] printk: bootconsole [ec_imx6q0] disabled
  103. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  104. [ 0.000000] Linux version 5.15.78-fslc+g97c2965ca430 (oe-user@oe-host) (aarch64-fslc-linux-gcc (GCC) 11.3.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Sun Nov 13 15:09:41 UTC 2022
  105. [ 0.000000] Machine model: Google i.MX8MQ Phanbell
  106. [ 0.000000] earlycon: ec_imx6q0 at MMIO 0x0000000030860000 (options '115200')
  107. [ 0.000000] printk: bootconsole [ec_imx6q0] enabled
  108. [ 0.000000] efi: UEFI not found.
  109. [ 0.000000] NUMA: No NUMA configuration found
  110. [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000007fffffff]
  111. [ 0.000000] NUMA: NODE_DATA [mem 0x7fdd2c00-0x7fdd4fff]
  112. [ 0.000000] Zone ranges:
  113. [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff]
  114. [ 0.000000] DMA32 empty
  115. [ 0.000000] Normal empty
  116. [ 0.000000] Movable zone start for each node
  117. [ 0.000000] Early memory node ranges
  118. [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]
  119. [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
  120. [ 0.000000] cma: Reserved 32 MiB at 0x000000007cc00000
  121. [ 0.000000] psci: probing for conduit method from DT.
  122. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  123. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  124. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  125. [ 0.000000] psci: SMC Calling Convention v1.2
  126. [ 0.000000] percpu: Embedded 20 pages/cpu s41560 r8192 d32168 u81920
  127. [ 0.000000] Detected VIPT I-cache on CPU0
  128. [ 0.000000] CPU features: detected: GIC system register CPU interface
  129. [ 0.000000] CPU features: detected: ARM erratum 845719
  130. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048
  131. [ 0.000000] Policy zone: DMA
  132. [ 0.000000] Kernel command line: console=ttymxc0,115200 console=tty0 earlycon=ec_imx6q,0x30860000,115200 root=/dev/mmcblk1p2 rootfstype=ext4 rw rootwait init=/sbin/init net.ifnames=0 pci=pcie_bus_perf
  133. [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
  134. [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
  135. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  136. [ 0.000000] Memory: 961896K/1048576K available (15168K kernel code, 3082K rwdata, 8248K rodata, 6208K init, 498K bss, 53912K reserved, 32768K cma-reserved)
  137. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  138. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  139. [ 0.000000] rcu: RCU event tracing is enabled.
  140. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
  141. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  142. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  143. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  144. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  145. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  146. [ 0.000000] GICv3: 128 SPIs implemented
  147. [ 0.000000] GICv3: 0 Extended SPIs implemented
  148. [ 0.000000] GICv3: Distributor has no Range Selector support
  149. [ 0.000000] Root IRQ handler: gic_handle_irq
  150. [ 0.000000] GICv3: 16 PPIs implemented
  151. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000038880000
  152. [ 0.000000] ITS: No ITS available, not enabling LPIs
  153. [ 0.000000] arch_timer: cp15 timer(s) running at 8.33MHz (phys).
  154. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1ec0311ec, max_idle_ns: 440795202152 ns
  155. [ 0.000000] sched_clock: 56 bits at 8MHz, resolution 120ns, wraps every 2199023255541ns
  156. [ 0.009020] Console: colour dummy device 80x25
  157. [ 0.012469] printk: console [tty0] enabled
  158. [ 0.016571] printk: bootconsole [ec_imx6q0] disabled
  159. [ 0.021620] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.66 BogoMIPS (lpj=33333)
  160. [ 0.021646] pid_max: default: 32768 minimum: 301
  161. [ 0.021717] LSM: Security Framework initializing
  162. [ 0.021828] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
  163. [ 0.021851] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
  164. [ 0.023498] rcu: Hierarchical SRCU implementation.
  165. [ 0.025687] EFI services will not be available.
  166. [ 0.025906] smp: Bringing up secondary CPUs ...
  167. [ 0.026377] Detected VIPT I-cache on CPU1
  168. [ 0.026411] GICv3: CPU1: found redistributor 1 region 0:0x00000000388a0000
  169. [ 0.026451] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  170. [ 0.026958] Detected VIPT I-cache on CPU2
  171. [ 0.026981] GICv3: CPU2: found redistributor 2 region 0:0x00000000388c0000
  172. [ 0.027005] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  173. [ 0.027465] Detected VIPT I-cache on CPU3
  174. [ 0.027486] GICv3: CPU3: found redistributor 3 region 0:0x00000000388e0000
  175. [ 0.027508] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  176. [ 0.027576] smp: Brought up 1 node, 4 CPUs
  177. [ 0.027654] SMP: Total of 4 processors activated.
  178. [ 0.027666] CPU features: detected: 32-bit EL0 Support
  179. [ 0.027679] CPU features: detected: 32-bit EL1 Support
  180. [ 0.027692] CPU features: detected: CRC32 instructions
  181. [ 0.035775] CPU: All CPU(s) started at EL2
  182. [ 0.035819] alternatives: patching kernel code
  183. [ 0.037037] devtmpfs: initialized
  184. [ 0.042422] KASLR disabled due to lack of seed
  185. [ 0.042604] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  186. [ 0.042636] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  187. [ 0.043712] pinctrl core: initialized pinctrl subsystem
  188. [ 0.044658] DMI not present or invalid.
  189. [ 0.045318] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  190. [ 0.046774] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
  191. [ 0.046893] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  192. [ 0.047028] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  193. [ 0.047114] audit: initializing netlink subsys (disabled)
  194. [ 0.047276] audit: type=2000 audit(0.036:1): state=initialized audit_enabled=0 res=1
  195. [ 0.048362] thermal_sys: Registered thermal governor 'step_wise'
  196. [ 0.048368] thermal_sys: Registered thermal governor 'power_allocator'
  197. [ 0.048787] cpuidle: using governor menu
  198. [ 0.049002] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  199. [ 0.049099] ASID allocator initialised with 65536 entries
  200. [ 0.050565] Serial: AMBA PL011 UART driver
  201. [ 0.058181] imx8mq-pinctrl 30330000.pinctrl: initialized IMX pinctrl driver
  202. [ 0.079279] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  203. [ 0.079314] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
  204. [ 0.079330] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  205. [ 0.079346] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
  206. [ 0.080510] cryptd: max_cpu_qlen set to 1000
  207. [ 0.082703] ACPI: Interpreter disabled.
  208. [ 0.084487] iommu: Default domain type: Translated
  209. [ 0.084502] iommu: DMA domain TLB invalidation policy: strict mode
  210. [ 0.084763] vgaarb: loaded
  211. [ 0.085079] SCSI subsystem initialized
  212. [ 0.085403] usbcore: registered new interface driver usbfs
  213. [ 0.085450] usbcore: registered new interface driver hub
  214. [ 0.085488] usbcore: registered new device driver usb
  215. [ 0.086227] pps_core: LinuxPPS API ver. 1 registered
  216. [ 0.086241] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  217. [ 0.086269] PTP clock support registered
  218. [ 0.086391] EDAC MC: Ver: 3.0.0
  219. [ 0.087889] FPGA manager framework
  220. [ 0.087981] Advanced Linux Sound Architecture Driver Initialized.
  221. [ 0.088864] clocksource: Switched to clocksource arch_sys_counter
  222. [ 0.089016] VFS: Disk quotas dquot_6.6.0
  223. [ 0.089071] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  224. [ 0.089252] pnp: PnP ACPI: disabled
  225. [ 0.095120] NET: Registered PF_INET protocol family
  226. [ 0.095259] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
  227. [ 0.095971] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
  228. [ 0.096038] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  229. [ 0.096063] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
  230. [ 0.096145] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
  231. [ 0.096284] TCP: Hash tables configured (established 8192 bind 8192)
  232. [ 0.096377] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
  233. [ 0.096419] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
  234. [ 0.096548] NET: Registered PF_UNIX/PF_LOCAL protocol family
  235. [ 0.096941] RPC: Registered named UNIX socket transport module.
  236. [ 0.096958] RPC: Registered udp transport module.
  237. [ 0.096970] RPC: Registered tcp transport module.
  238. [ 0.096981] RPC: Registered tcp NFSv4.1 backchannel transport module.
  239. [ 0.096999] PCI: CLS 0 bytes, default 64
  240. [ 0.097609] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  241. [ 0.097980] kvm [1]: IPA Size Limit: 40 bits
  242. [ 0.099398] kvm [1]: vgic-v2@31020000
  243. [ 0.099422] kvm [1]: GIC system register CPU interface enabled
  244. [ 0.099509] kvm [1]: vgic interrupt IRQ9
  245. [ 0.099646] kvm [1]: Hyp mode initialized successfully
  246. [ 0.103119] Initialise system trusted keyrings
  247. [ 0.103256] workingset: timestamp_bits=42 max_order=18 bucket_order=0
  248. [ 0.109653] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  249. [ 0.110243] NFS: Registering the id_resolver key type
  250. [ 0.110290] Key type id_resolver registered
  251. [ 0.110304] Key type id_legacy registered
  252. [ 0.110389] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  253. [ 0.110406] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  254. [ 0.110533] 9p: Installing v9fs 9p2000 file system support
  255. [ 0.153497] Key type asymmetric registered
  256. [ 0.153513] Asymmetric key parser 'x509' registered
  257. [ 0.153577] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
  258. [ 0.153597] io scheduler mq-deadline registered
  259. [ 0.153610] io scheduler kyber registered
  260. [ 0.165120] EINJ: ACPI disabled.
  261. [ 0.183053] SoC: i.MX8MQ revision 2.1
  262. [ 0.191847] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  263. [ 0.194250] SuperH (H)SCI(F) driver initialized
  264. [ 0.194809] 30860000.serial: ttymxc0 at MMIO 0x30860000 (irq = 35, base_baud = 1562500) is a IMX
  265. [ 1.125107] printk: console [ttymxc0] enabled
  266. [ 1.130062] msm_serial: driver initialized
  267. [ 1.141277] loop: module loaded
  268. [ 1.145419] megasas: 07.717.02.00-rc1
  269. [ 1.155537] tun: Universal TUN/TAP device driver, 1.6
  270. [ 1.161520] thunder_xcv, ver 1.0
  271. [ 1.164785] thunder_bgx, ver 1.0
  272. [ 1.168064] nicpf, ver 1.0
  273. [ 1.172230] hclge is initializing
  274. [ 1.175575] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
  275. [ 1.182815] hns3: Copyright (c) 2017 Huawei Corporation.
  276. [ 1.188186] e1000: Intel(R) PRO/1000 Network Driver
  277. [ 1.193079] e1000: Copyright (c) 1999-2006 Intel Corporation.
  278. [ 1.198877] e1000e: Intel(R) PRO/1000 Network Driver
  279. [ 1.203857] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  280. [ 1.209823] igb: Intel(R) Gigabit Ethernet Network Driver
  281. [ 1.215244] igb: Copyright (c) 2007-2014 Intel Corporation.
  282. [ 1.220867] igbvf: Intel(R) Gigabit Virtual Function Network Driver
  283. [ 1.227152] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  284. [ 1.233432] sky2: driver version 1.30
  285. [ 1.238245] VFIO - User Level meta-driver version: 0.3
  286. [ 1.245554] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  287. [ 1.252101] ehci-pci: EHCI PCI platform driver
  288. [ 1.256588] ehci-platform: EHCI generic platform driver
  289. [ 1.261957] ehci-orion: EHCI orion driver
  290. [ 1.266083] ehci-exynos: EHCI Exynos driver
  291. [ 1.270370] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  292. [ 1.276576] ohci-pci: OHCI PCI platform driver
  293. [ 1.281066] ohci-platform: OHCI generic platform driver
  294. [ 1.286421] ohci-exynos: OHCI Exynos driver
  295. [ 1.291231] usbcore: registered new interface driver usb-storage
  296. [ 1.300176] i2c_dev: i2c /dev entries driver
  297. [ 1.311421] sdhci: Secure Digital Host Controller Interface driver
  298. [ 1.317633] sdhci: Copyright(c) Pierre Ossman
  299. [ 1.322807] Synopsys Designware Multimedia Card Interface Driver
  300. [ 1.329934] sdhci-pltfm: SDHCI platform and OF driver helper
  301. [ 1.337531] ledtrig-cpu: registered to indicate activity on CPUs
  302. [ 1.344789] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
  303. [ 1.351891] usbcore: registered new interface driver usbhid
  304. [ 1.357482] usbhid: USB HID core driver
  305. [ 1.367217] NET: Registered PF_PACKET protocol family
  306. [ 1.367647] mmc0: SDHCI controller on 30b40000.mmc [30b40000.mmc] using ADMA
  307. [ 1.372427] 9pnet: Installing 9P2000 support
  308. [ 1.383696] Key type dns_resolver registered
  309. [ 1.388279] Loading compiled-in X.509 certificates
  310. [ 1.439118] ldo5: supplied by buck6
  311. [ 1.444451] ldo6: supplied by buck7
  312. [ 1.445550] mmc0: new HS200 MMC card at address 0001
  313. [ 1.453402] mmcblk0: mmc0:0001 8GTF4R 7.28 GiB
  314. [ 1.459817] i2c i2c-0: IMX I2C adapter registered
  315. [ 1.461185] GPT:partition_entry_array_crc32 values don't match: 0x4db2764f != 0x97897541
  316. [ 1.465756] imx8mq-usb-phy 381f0040.usb-phy: supply vbus not found, using dummy regulator
  317. [ 1.472649] GPT: Use GNU Parted to correct GPT errors.
  318. [ 1.481395] imx8mq-usb-phy 382f0040.usb-phy: supply vbus not found, using dummy regulator
  319. [ 1.486014] mmcblk0: p1 p2 p3 p4
  320. [ 1.496562] pps pps0: new PPS source ptp0
  321. [ 1.498274] mmcblk0boot0: mmc0:0001 8GTF4R 4.00 MiB
  322. [ 1.507633] mmcblk0boot1: mmc0:0001 8GTF4R 4.00 MiB
  323. [ 1.513550] mmcblk0rpmb: mmc0:0001 8GTF4R 512 KiB, chardev (234:0)
  324. [ 1.661720] fec 30be0000.ethernet eth0: registered PHC device 0
  325. [ 1.671651] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
  326. [ 1.678213] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 1
  327. [ 1.685996] xhci-hcd xhci-hcd.3.auto: hcc params 0x0220fe6c hci version 0x110 quirks 0x0000002000010010
  328. [ 1.695451] xhci-hcd xhci-hcd.3.auto: irq 49, io mem 0x38200000
  329. [ 1.701523] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
  330. [ 1.707033] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 2
  331. [ 1.714717] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed
  332. [ 1.721782] hub 1-0:1.0: USB hub found
  333. [ 1.725572] hub 1-0:1.0: 1 port detected
  334. [ 1.729807] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  335. [ 1.738328] hub 2-0:1.0: USB hub found
  336. [ 1.742115] hub 2-0:1.0: 1 port detected
  337. [ 1.749421] input: bd718xx-pwrkey as /devices/platform/soc@0/30800000.bus/30a20000.i2c/i2c-0/0-004b/gpio-keys.0.auto/input/input0
  338. [ 1.749803] sdhci-esdhc-imx 30b50000.mmc: Got CD GPIO
  339. [ 1.762001] ALSA device list:
  340. [ 1.769160] No soundcards found.
  341. [ 1.797597] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using ADMA
  342. [ 1.804822] Waiting for root device /dev/mmcblk1p2...
  343. [ 1.928871] mmc1: host does not support reading read-only switch, assuming write-enable
  344. [ 1.962112] mmc1: new ultra high speed SDR104 SDHC card at address 1234
  345. [ 1.969232] mmcblk1: mmc1:1234 SA16G 14.6 GiB
  346. [ 1.978837] GPT:Primary header thinks Alt. header is not at the end of the disk.
  347. [ 1.986295] GPT:685209 != 30703615
  348. [ 1.989714] GPT:Alternate GPT header not at the end of the disk.
  349. [ 1.995733] GPT:685209 != 30703615
  350. [ 1.999147] GPT: Use GNU Parted to correct GPT errors.
  351. [ 2.004315] mmcblk1: p1 p2
  352. [ 3.126162] EXT4-fs (mmcblk1p2): recovery complete
  353. [ 3.253788] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
  354. [ 3.263612] VFS: Mounted root (ext4 filesystem) on device 179:98.
  355. [ 3.270491] devtmpfs: mounted
  356. [ 3.275126] Freeing unused kernel memory: 6208K
  357. [ 3.279763] Run /sbin/init as init process
  358. [ 3.442697] systemd[1]: System time before build time, advancing clock.
  359. [ 3.489025] NET: Registered PF_INET6 protocol family
  360. [ 3.494907] Segment Routing with IPv6
  361. [ 3.498623] In-situ OAM (IOAM) with IPv6
  362. [ 3.517514] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -)
  363. [ 3.549378] systemd[1]: Detected architecture arm64.
  364. [ 3.610909] systemd[1]: Hostname set to <coral-dev>.
  365. [ 4.012298] systemd[1]: Queued start job for default target Multi-User System.
  366. [ 4.058760] systemd[1]: Created slice Slice /system/getty.
  367. [ 4.066462] systemd[1]: Created slice Slice /system/modprobe.
  368. [ 4.074124] systemd[1]: Created slice Slice /system/serial-getty.
  369. [ 4.081908] systemd[1]: Created slice User and Session Slice.
  370. [ 4.088076] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  371. [ 4.096382] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  372. [ 4.104413] systemd[1]: Reached target Path Units.
  373. [ 4.109441] systemd[1]: Reached target Remote File Systems.
  374. [ 4.115242] systemd[1]: Reached target Slice Units.
  375. [ 4.120387] systemd[1]: Reached target Swaps.
  376. [ 4.126827] systemd[1]: Listening on RPCbind Server Activation Socket.
  377. [ 4.133571] systemd[1]: Reached target RPC Port Mapper.
  378. [ 4.141011] systemd[1]: Listening on Syslog Socket.
  379. [ 4.146287] systemd[1]: Listening on initctl Compatibility Named Pipe.
  380. [ 4.153598] systemd[1]: Listening on Journal Audit Socket.
  381. [ 4.159564] systemd[1]: Listening on Journal Socket (/dev/log).
  382. [ 4.166055] systemd[1]: Listening on Journal Socket.
  383. [ 4.171768] systemd[1]: Listening on Network Service Netlink Socket.
  384. [ 4.178764] systemd[1]: Listening on udev Control Socket.
  385. [ 4.184643] systemd[1]: Listening on udev Kernel Socket.
  386. [ 4.190478] systemd[1]: Listening on User Database Manager Socket.
  387. [ 4.200241] systemd[1]: Mounting Huge Pages File System...
  388. [ 4.209556] systemd[1]: Mounting POSIX Message Queue File System...
  389. [ 4.219603] systemd[1]: Mounting Kernel Debug File System...
  390. [ 4.226001] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing).
  391. [ 4.242905] systemd[1]: Mounting Temporary Directory /tmp...
  392. [ 4.253019] systemd[1]: Starting Create List of Static Device Nodes...
  393. [ 4.264102] systemd[1]: Starting Load Kernel Module configfs...
  394. [ 4.274168] systemd[1]: Starting Load Kernel Module drm...
  395. [ 4.283737] systemd[1]: Starting Load Kernel Module fuse...
  396. [ 4.297122] systemd[1]: Starting RPC Bind...
  397. [ 4.301901] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/).
  398. [ 4.315052] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
  399. [ 4.316119] fuse: init (API version 7.34)
  400. [ 4.328046] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
  401. [ 4.345408] systemd[1]: Starting Journal Service...
  402. [ 4.352554] systemd[1]: Load Kernel Modules was skipped because all trigger condition checks failed.
  403. [ 4.365522] systemd[1]: Starting Generate network units from Kernel command line...
  404. [ 4.377743] systemd[1]: Starting Remount Root and Kernel File Systems...
  405. [ 4.388970] systemd[1]: Starting Apply Kernel Variables...
  406. [ 4.399659] systemd[1]: Starting Coldplug All udev Devices...
  407. [ 4.402352] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null). Quota mode: none.
  408. [ 4.422066] systemd[1]: Started RPC Bind.
  409. [ 4.427142] systemd[1]: Mounted Huge Pages File System.
  410. [ 4.433263] systemd[1]: Mounted POSIX Message Queue File System.
  411. [ 4.440055] systemd[1]: Mounted Kernel Debug File System.
  412. [ 4.446020] systemd[1]: Mounted Temporary Directory /tmp.
  413. [ 4.453239] systemd[1]: Finished Create List of Static Device Nodes.
  414. [ 4.460975] systemd[1]: modprobe@configfs.service: Deactivated successfully.
  415. [ 4.469596] systemd[1]: Finished Load Kernel Module configfs.
  416. [ 4.477060] systemd[1]: modprobe@drm.service: Deactivated successfully.
  417. [ 4.484992] systemd[1]: Finished Load Kernel Module drm.
  418. [ 4.491208] systemd[1]: Started Journal Service.
  419. [ 4.539381] systemd-journald[159]: Received client request to flush runtime journal.
  420. [ 5.175169] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  421. [ 5.201167] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  422. [ 5.225575] random: dbus-daemon: uninitialized urandom read (12 bytes read)
  423. [ 5.303824] random: dbus-daemon: uninitialized urandom read (12 bytes read)
  424. [ 5.487872] Bluetooth: Core ver 2.22
  425. [ 5.487937] NET: Registered PF_BLUETOOTH protocol family
  426. [ 5.487942] Bluetooth: HCI device and connection manager initialized
  427. [ 5.487957] Bluetooth: HCI socket layer initialized
  428. [ 5.487965] Bluetooth: L2CAP socket layer initialized
  429. [ 5.487981] Bluetooth: SCO socket layer initialized
  430. [ 5.735782] random: avahi-daemon: uninitialized urandom read (4 bytes read)
  431. [ 5.883371] imx-cpufreq-dt imx-cpufreq-dt: cpu speed grade 3 mkt segment 0 supported-hw 0x8 0x1
  432. [ 5.961890] thermal thermal_zone0: binding zone cpu-thermal with cdev cpufreq-cpu0 failed:-22
  433. [ 5.985189] caam 30900000.crypto: Entropy delay = 3200
  434. [ 5.992545] caam 30900000.crypto: Entropy delay = 3600
  435. [ 6.013057] etnaviv etnaviv: bound 38000000.gpu (ops gpu_ops [etnaviv])
  436. [ 6.028899] etnaviv-gpu 38000000.gpu: model: GC7000, revision: 6214
  437. [ 6.045254] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0
  438. [ 6.047182] imx-sdma 302c0000.sdma: loaded firmware 4.5
  439. [ 6.061135] imx-sdma 30bd0000.sdma: loaded firmware 4.5
  440. [ 6.071974] caam 30900000.crypto: Instantiated RNG4 SH0
  441. [ 6.089400] snvs_rtc 30370000.snvs:snvs-rtc-lp: registered as rtc0
  442. [ 6.110325] snvs_rtc 30370000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01T00:00:00 UTC (0)
  443. [ 6.139630] caam 30900000.crypto: Instantiated RNG4 SH1
  444. [ 6.144921] caam 30900000.crypto: device ID = 0x0a16040100000000 (Era 9)
  445. [ 6.153224] caam 30900000.crypto: job rings = 3, qi = 0
  446. [ 6.204469] mc: Linux media interface: v0.10
  447. [ 6.214880] imx8m-ddrc-devfreq 3d400000.memory-controller: failed to get OPP table
  448. [ 6.240751] videodev: Linux video capture interface: v2.00
  449. [ 6.301357] hantro_vpu: module is from the staging directory, the quality is unknown, you have been warned.
  450. [ 6.349310] RTL8211F Gigabit Ethernet 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL)
  451. [ 6.349973] hantro-vpu 38300000.video-codec: registered nxp,imx8mq-vpu-dec as /dev/video0
  452. [ 6.501615] caam_jr 30901000.jr: failed to flush job ring 0
  453. [ 6.507347] caam_jr: probe of 30901000.jr failed with error -5
  454. [ 6.516565] caam algorithms registered in /proc/crypto
  455. [ 6.522630] caam 30900000.crypto: caam pkc algorithms registered in /proc/crypto
  456. [ 6.530067] caam 30900000.crypto: registering rng-caam
  457. [ 6.548877] random: crng init done
  458.  
  459. FSLC Wayland with XWayland 4.0 coral-dev ttymxc0
  460.  
  461. coral-dev login: [ 33.772906] buck3: disabling
  462.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!