[    0.000000] Truncating memory at 0xc0000000 to fit in 32-bit physical address space
[    0.000000] smem_find(137, 80): wrong size 72
[    0.023531] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
[    0.055943] msm_rpm_get_status(): Status id 433 not defined for target
[    0.055943] msm_rpm_get_status(): Status id 433 not defined for target
[    0.055974] msm_rpm_get_status(): Status id 433 not defined for target
[    0.055974] msm_rpm_get_status(): Status id 433 not defined for target
[    0.055974] msm_rpm_get_status(): Status id 433 not defined for target
[    0.056004] msm_rpm_get_status(): Status id 433 not defined for target
[    0.056004] msm_rpm_get_status(): Status id 433 not defined for target
[    0.056035] msm_rpm_get_status(): Status id 433 not defined for target
[    0.076514] msm_gpiomux_install: write failure: -14
[    0.076545] msm_gpiomux_install: write failure: -14
[    0.076545] msm_gpiomux_install: write failure: -14
[    0.076545] msm_gpiomux_install: write failure: -14
[    0.117930] [msm8960_init_cam:1528]setting done!!
[    0.177231] i2c i2c-14: Invalid 7-bit I2C address 0x00
[    0.177323] i2c i2c-14: Can't create device at 0x00
[    0.177842] i2c i2c-19: Failed to register i2c client cmc624 at 0x38 (-16)
[    0.177964] i2c i2c-19: Can't create device at 0x38
[    0.178483] Error-Bad Function Input
[    0.179185] max8952 19-0060: DVS modes disabled because VID0 and VID1 do not have proper controls.
[    0.347657] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: scm_pas
[    0.359316] smd_channel_probe_worker: allocation table not initialized
[    0.370273] msm_ipc_router_init: Unable to create IPC logging for IPC RTR
[    0.371127] msm_ipc_router_ipc_log_init: Unable to create IPC logging for Req/Resp
[    0.371432] msm_ipc_router_ipc_log_init: Unable to create IPC logging for Indications
[    0.378025] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: acpuclk-8960
[    0.421944] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: dtv
[    0.426216] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: mdp
[    0.440134] pm_runtime: fail to wake up
[    0.791149] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group eeb90e08
[    0.793193] Inside writeback_driver_init
[    0.793773] Inside writeback_probe
[    1.195757] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: rotator
[    1.209644] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: grp3d
[    1.220418] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: grp2d0
[    1.230642] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: grp2d1
[    1.265099] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: qsee
[    1.460827] cm36651_setup_reg: initial proximity value = 0
[    1.580253] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: usb
[    1.605585] mms_ts 3-0048: [TSP] ISC Ver [0xbd] [0x22] [0x22]
[    1.610376] mms_ts 3-0048: [TSP] fw is latest. Do not update.
[    1.624996] [__s5c73m3_probe:3868] S5C73M3 probe
[    1.628933] [s5c73m3_sensor_probe_cb:3843] Entered
[    1.633694] [s5c73m3_i2c_probe:3725] Entered
[    1.637814] [s5c73m3_init_client:3424] Entered
[    1.642423] [s5c73m3_i2c_probe:3745] Exit
[    1.646390] [s5c73m3_sensor_probe:3776] Entered
[    1.650938] [s5c73m3_spi_init:226] Entered
[    1.654875] [s5c73m3_spi_probe:191] Entered
[    1.659056] [s5c73m3_spi_probe:201] s5c73m3_spi successfully probed
[    1.665496] [s5c73m3_sensor_probe :  3799] Probe_done!!
[    1.720402] couldn't get usb power supply
[    1.726201] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: msm_sdcc
[    1.736731] mmc0: No card detect facilities available
[    1.744117] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: msm_sdcc
[    1.763131] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: msm_sdcc
[    1.775522] aat1290a_led_probe : Probe
[    2.083290] bam_dmux_init : unable to create IPC Logging Context
[    2.120891] cypress_touchkey 16-0020: Touchkey FW Version: 0x06
[    5.559163] init: /init.qcom.rc: 613: ignored duplicate definition of service 'ril-daemon'
[    5.567953] init: /init.target.rc: 43: invalid command 'check_fs'
[    5.573111] init: /init.target.rc: 47: invalid command 'check_fs'
[    5.579246] init: /init.target.rc: 72: invalid command 'check_fs'
[    5.588280] init: invalid uid 'fm_radio'
[    6.011811] init: could not open /dev/keychord
[    6.162551] init: property 'ro.board.platform' doesn't exist while expanding '${ro.board.platform}'
[    6.873370] EXT4-fs error (device mmcblk0p15): ext4_lookup:1047: inode #2: comm init: deleted inode referenced: 15
[    6.882801] Aborting journal on device mmcblk0p15-8.
[    6.889729] Kernel panic - not syncing: EXT4-fs (device mmcblk0p15): panic forced after error
[    6.889729]
[    6.898763] [<c0013cb8>] (unwind_backtrace+0x0/0xe0) from [<c073a42c>] (panic+0x88/0x1f8)
[    6.906973] [<c073a42c>] (panic+0x88/0x1f8) from [<c01a379c>] (ext4_handle_error+0x8c/0x98)
[    6.915244] [<c01a379c>] (ext4_handle_error+0x8c/0x98) from [<c01a3afc>] (ext4_error_inode+0xd4/0xe4)
[    6.924492] [<c01a3afc>] (ext4_error_inode+0xd4/0xe4) from [<c0192c08>] (ext4_lookup+0xec/0x154)
[    6.933251] [<c0192c08>] (ext4_lookup+0xec/0x154) from [<c013846c>] (__lookup_hash+0xb0/0xe8)
[    6.941767] [<c013846c>] (__lookup_hash+0xb0/0xe8) from [<c013a9ac>] (kern_path_create+0x64/0xe4)
[    6.950618] [<c013a9ac>] (kern_path_create+0x64/0xe4) from [<c013aa64>] (user_path_create+0x38/0x50)
[    6.959682] [<c013aa64>] (user_path_create+0x38/0x50) from [<c013c5a4>] (sys_mkdirat+0x14/0x9c)
[    6.968411] [<c013c5a4>] (sys_mkdirat+0x14/0x9c) from [<c000de40>] (ret_fast_syscall+0x0/0x30)
[    6.977018] CPU1: stopping
[    6.979642] [<c0013cb8>] (unwind_backtrace+0x0/0xe0) from [<c0012d24>] (handle_IPI+0x100/0x1cc)
[    6.988371] [<c0012d24>] (handle_IPI+0x100/0x1cc) from [<c0008670>] (gic_handle_irq+0xa8/0xb4)
[    6.996978] [<c0008670>] (gic_handle_irq+0xa8/0xb4) from [<c000da40>] (__irq_svc+0x40/0x70)
[    7.005280] Exception stack(0xef161f70 to 0xef161fb8)
[    7.010285] 1f60:                                     00000000 00000018 00000003 00000000
[    7.018495] 1f80: c2e67600 00000000 00000003 c0d41c90 00000001 511f04d0 00000000 00000000
[    7.026613] 1fa0: 00000000 ef161fb8 c004c3d8 c00517b4 60000013 ffffffff
[    7.033267] [<c000da40>] (__irq_svc+0x40/0x70) from [<c00517b4>] (msm_cpuidle_enter+0x4c/0x54)
[    7.041843] [<c00517b4>] (msm_cpuidle_enter+0x4c/0x54) from [<c04ea384>] (cpuidle_enter+0x14/0x18)
[    7.050785] [<c04ea384>] (cpuidle_enter+0x14/0x18) from [<c04ea864>] (cpuidle_idle_call+0x154/0x374)
[    7.059850] [<c04ea864>] (cpuidle_idle_call+0x154/0x374) from [<c000ec90>] (cpu_idle+0x58/0xe8)
[    7.068579] [<c000ec90>] (cpu_idle+0x58/0xe8) from [<809353d4>] (0x809353d4)
[    7.175980] Rebooting in 5 seconds..
[   12.180894] Going down for restart now
[   12.183854] msm_restart : clear reset flag


No errors detected