SHARE
TWEET

Untitled

a guest Dec 6th, 2016 86 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. sudo hdparm --user-master m --security-unlock "                                " /dev/sda
  2.    
  3. ATA device, with non-removable media
  4.     Model Number:       HGST HTS541075A9E680                    
  5.     Serial Number:      130723JD13001B02LK3A
  6.     Firmware Revision:  JA2OA560
  7.     Transport:          Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6; Revision: ATA8-AST T13 Project D1697 Revision 0b
  8. Standards:
  9.     Used: unknown (minor revision code 0x0028)
  10.     Supported: 8 7 6 5
  11.     Likely used: 8
  12. Configuration:
  13.     Logical     max current
  14.     cylinders   16383   16383
  15.     heads       16  16
  16.     sectors/track   63  63
  17.     --
  18.     CHS current addressable sectors:    16514064
  19.     LBA    user addressable sectors:   268435455
  20.     LBA48  user addressable sectors:  1465149168
  21.     Logical  Sector size:                   512 bytes
  22.     Physical Sector size:                  4096 bytes
  23.     Logical Sector-0 offset:                  0 bytes
  24.     device size with M = 1024*1024:      715404 MBytes
  25.     device size with M = 1000*1000:      750156 MBytes (750 GB)
  26.     cache/buffer size  = 8192 KBytes (type=DualPortCache)
  27.     Form Factor: 2.5 inch
  28.     Nominal Media Rotation Rate: 5400
  29. Capabilities:
  30.     LBA, IORDY(can be disabled)
  31.     Queue depth: 32
  32.     Standby timer values: spec'd by Standard, no device specific minimum
  33.     R/W multiple sector transfer: Max = 16  Current = 16
  34.     Advanced power management level: 254
  35.     DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
  36.          Cycle time: min=120ns recommended=120ns
  37.     PIO: pio0 pio1 pio2 pio3 pio4
  38.          Cycle time: no flow control=120ns  IORDY flow control=120ns
  39. Commands/features:
  40.     Enabled Supported:
  41.        *    SMART feature set
  42.        *    Security Mode feature set
  43.        *    Power Management feature set
  44.             Write cache
  45.        *    Look-ahead
  46.        *    Host Protected Area feature set
  47.        *    WRITE_BUFFER command
  48.        *    READ_BUFFER command
  49.        *    NOP cmd
  50.        *    DOWNLOAD_MICROCODE
  51.        *    Advanced Power Management feature set
  52.             Power-Up In Standby feature set
  53.        *    SET_FEATURES required to spinup after power up
  54.             SET_MAX security extension
  55.        *    48-bit Address feature set
  56.        *    Device Configuration Overlay feature set
  57.        *    Mandatory FLUSH_CACHE
  58.        *    FLUSH_CACHE_EXT
  59.        *    SMART error logging
  60.        *    SMART self-test
  61.        *    General Purpose Logging feature set
  62.        *    WRITE_{DMA|MULTIPLE}_FUA_EXT
  63.        *    64-bit World wide name
  64.        *    IDLE_IMMEDIATE with UNLOAD
  65.        *    WRITE_UNCORRECTABLE_EXT command
  66.        *    {READ,WRITE}_DMA_EXT_GPL commands
  67.        *    Segmented DOWNLOAD_MICROCODE
  68.        *    Gen1 signaling speed (1.5Gb/s)
  69.        *    Gen2 signaling speed (3.0Gb/s)
  70.        *    Native Command Queueing (NCQ)
  71.        *    Host-initiated interface power management
  72.        *    Phy event counters
  73.        *    Idle-Unload when NCQ is active
  74.        *    NCQ priority information
  75.             Non-Zero buffer offsets in DMA Setup FIS
  76.        *    DMA Setup Auto-Activate optimization
  77.             Device-initiated interface power management
  78.             In-order data delivery
  79.        *    Software settings preservation
  80.        *    SMART Command Transport (SCT) feature set
  81.        *    SCT Write Same (AC2)
  82.        *    SCT Error Recovery Control (AC3)
  83.        *    SCT Features Control (AC4)
  84.        *    SCT Data Tables (AC5)
  85. Security:
  86.     Master password revision code = 65534
  87.         supported
  88.         enabled
  89.         locked
  90.     not frozen
  91.     not expired: security count
  92.         supported: enhanced erase
  93.     Security level high
  94.     164min for SECURITY ERASE UNIT. 166min for ENHANCED SECURITY ERASE UNIT.
  95.    
  96. /dev/sda:
  97.  Issuing SECURITY_UNLOCK command, password="                               ", user=master
  98. SECURITY_UNLOCK: Input/output error
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top