[2017-06-28 12:53:48] [Output] : ★ Bernard Bonavena pulls a floorjack under the rear end of the Audi SQ5 and begins to jack the floorjack up.
[2017-06-28 12:54:08] [Output] : ★ Bernard Bonavena jacks the floorjack up to the rear end of the vehicle slowly.
[2017-06-28 12:54:15] [Output] : ★ the floorjack hooks to the rear end of the Audi SQ5.      ((Bernard Bonavena))
[2017-06-28 12:54:28] [Output] : ★ Bernard Bonavena begins to jack up the rear of the Audi SQ5 with the floorjack.
[2017-06-28 12:54:39] [Output] : ★ the Audi's tires lift up from the ground slowly with each pump.      ((Bernard Bonavena))
[2017-06-28 12:54:53] [Output] : ADVERT: Selling a 2006 Ferrari F430 F1 Spider | CALL/SMS  | #678736
[2017-06-28 12:54:59] [Output] : ★ Bernard Bonavena stops lifting the rear of the Audi into the air.
[2017-06-28 12:55:09] [Output] : ★ Bernard Bonavena walks to the side of his garage and picks up two floorjacks from the floor.
[2017-06-28 12:55:26] [Output] : ★ Bernard Bonavena gets under the jacked up Audi and places one floorjack on each side of the rear end assembly
[2017-06-28 12:55:53] [Output] : ★ Bernard Bonavena gets under the jacked up Audi and places one jackstand on each side of the rear end assembly
[2017-06-28 12:56:07] [Output] : ★ Bernard Bonavena  slowly lowers the floorjack and pulls it from under the rear end assembly of the Audi SQ5.
[2017-06-28 12:56:32] [Output] : ★ Bernard Bonavena grabs his tire iron and walks over to the rear drivers side wheel of the Audi SQ5.
[2017-06-28 12:56:55] [Output] : ★ Bernard Bonavena sets his tire iron on each lug nut and breaks them free with a quick jerking twist.
[2017-06-28 12:57:07] [Output] : ★ Bernard Bonavena begins loosening the lug nuts on the rear driverside wheel.
[2017-06-28 12:57:29] [Output] : ★ Bernard Bonavena removes all 5 lugnuts from the rear driverside axel studs and sets them in a pan besides him
[2017-06-28 12:57:53] [Output] : ★ Bernard Bonavena slowly pulls the wheel from the axel studs dismounting the rim and wheel from the vehicle.
[2017-06-28 12:58:02] [Output] : ★ Bernard Bonavena rolls the left drivers side wheel to the side.
[2017-06-28 12:58:22] [Output] : ★ Bernard Bonavena grabs a wrench from his back pocket and kneels down.
[2017-06-28 12:58:34] [Output] : ★ Bernard Bonavena begins to loosen the bolt that holds the caliper to the rotor.
[2017-06-28 12:58:48] [Output] : ★ Bernard Bonavena grabs a flathead screwdriver and peels the caliper from the rotor slowly.
[2017-06-28 12:59:00] [Output] : ★ Bernard Bonavena pulls the rotor from the axel studs and sets the rotor to the side.
[2017-06-28 12:59:14] [Output] : ★ Bernard Bonavena moves over to the rear passenger side of the vehicle with his tire iron.
[2017-06-28 12:59:28] [Output] : ★ Bernard Bonavena begins to break the five lugnuts on the wheel free with his tire iron.
[2017-06-28 12:59:41] [Output] : ★ Bernard Bonavena starts to loosen the lugnuts by hand, removing all five of the lug nuts.
[2017-06-28 12:59:46] [Output] : ★ Bernard Bonavena sets the lugnuts on a pan to the side of him.
[2017-06-28 12:59:56] [Output] : ★ Bernard Bonavena then slowly slides the rim and tire from the axel studs.
[2017-06-28 13:00:01] [Output] : ADVERT:  The Stinger - OPEN - Free beer, topless bartenders and false advertising! It's a pun. Loc. Montgomery
[2017-06-28 13:00:04] [Output] : ★ Bernard Bonavena sets the rim and tire to the side of the vehicle.
[2017-06-28 13:00:21] [Output] : ★ Bernard Bonavena begins to unscrew the boltt holding the caliper to the rotor.
[2017-06-28 13:00:37] [Output] : ★ Bernard Bonavena wedges his flathead screwdriver inbetween the rotor and the caliper and slips the caliper
[2017-06-28 13:00:40] [Output] : ★ from the rotor.      ((Bernard Bonavena))
[2017-06-28 13:00:49] [Output] : ★ Bernard Bonavena pulls the rotor from the axel studs and sets the rotor to the side.
[2017-06-28 13:01:05] [Output] : ★ The axels are showing on both sides of the rear end assembly.      ((Bernard Bonavena))
[2017-06-28 13:01:23] [Output] : Payslip
[2017-06-28 13:01:23] [Output] :
[2017-06-28 13:01:23] [Output] :   State Benefits: $200
[2017-06-28 13:01:23] [Output] :   Bank Interest: $210 (≈1.89%)
[2017-06-28 13:01:23] [Output] :   Vehicle Tax: $55
[2017-06-28 13:01:23] [Output] :   Property Expenses: $4
[2017-06-28 13:01:23] [Output] :   Apartment Rent: $120
[2017-06-28 13:01:23] [Output] :   Gross Income: $231
[2017-06-28 13:01:23] [Output] :   Remark(s): Transferred to your bank account.
[2017-06-28 13:01:43] [Output] : ★ Bernard Bonavena gets under the rear end of the vehicle and inspects the rear differential.
[2017-06-28 13:01:59] [Output] : ★ Bernard Bonavena sprays WD-40 on the rear differential cover bolts and begins digging into his pocket for his
[2017-06-28 13:02:01] [Output] : ★ wrench.      ((Bernard Bonavena))
[2017-06-28 13:02:16] [Output] : ★ Bernard Bonavena removes his wrench and begins to loosen the rear differential cover bolts slowly, but not
[2017-06-28 13:02:18] [Output] : ★ all the way      ((Bernard Bonavena))
[2017-06-28 13:02:35] [Output] : ★ Bernard Bonavena places a drain bucket under the rear differential and completely removes the three bottom
[2017-06-28 13:02:40] [Output] : ★ bolts on the rear differential cover.      ((Bernard Bonavena))
[2017-06-28 13:02:52] [Output] : ★ gear oil begins to seep out of the vehicle's rear end.      ((Bernard Bonavena))
[2017-06-28 13:03:16] [Output] : ★ The gear oil pours into the drain bucket. Bernard sits and waits for it to stop.      ((Bernard Bonavena))
[2017-06-28 13:03:36] [Output] : ★ Bernard Bonavena pulls the drain bucket from under the rear differential and begins to loosen all bolts on
[2017-06-28 13:03:39] [Output] : ★ the rear differential cover.      ((Bernard Bonavena))
[2017-06-28 13:03:48] [Output] : ★ Bernard Bonavena completely removes the rear differential cover and all it's bolts holding it into place.
[2017-06-28 13:04:00] [Output] : ★ Bernard Bonavena sets the cover onto the ground and places the bolts inside of the cover.
[2017-06-28 13:04:30] [Output] : ★ Bernard Bonavena grabs his wrench and begins to remove the right bearing cap located in the rear end assembly
[2017-06-28 13:04:30] [Output] : ADVERT: Afghan delight | Afghan bakery, open now | Location: Free Rd  | #.
[2017-06-28 13:04:46] [Output] : ★ Bernard Bonavena loosens the two bolts and removes the right bearing cap from the rear differential.
[2017-06-28 13:04:59] [Output] : ★ Bernard Bonavena sets the right bearing cap aside.
[2017-06-28 13:05:15] [Output] : ★ Bernard Bonavena sets his wrench on the top bolt of the lef tbearing cap and begins to loosen it.
[2017-06-28 13:05:29] [Output] : ★ Bernard Bonavena removes both bolts of the left bearing cap and removes it from the rear differential.
[2017-06-28 13:05:42] [Output] : ADVERT: Buying any Ford Crown Victoria. ~ Call!  | #845103
[2017-06-28 13:05:46] [Output] : ADVERT: Buying| Searching for a sports car around 20,000$  | #767608
[2017-06-28 13:05:53] [Output] : ★ Bernard Bonavena presses the left axel in and removes the c-clip that keeps the axel mounted in the rear end
[2017-06-28 13:05:59] [Output] : ★ assembly with a magnet.      ((Bernard Bonavena))
[2017-06-28 13:06:24] [Output] : ★ Bernard Bonavena leans over to the drivers side axel and pulls the axel out from the rear end assembly.
[2017-06-28 13:06:34] [Output] : ★ Bernard Bonavena inspects the damage on the drivers side axel and throws it into the scrap pile.
[2017-06-28 13:06:54] [Output] : ★ Bernard Bonavena leans down and presses the right drivers side axel in to retrieve the c-clip that holds it.
[2017-06-28 13:07:09] [Output] : ★ Bernard Bonavena removes the c-clip and sets it down in the pile under the rear differential.
[2017-06-28 13:07:13] [Output] : ADVERT: BestBuy at JGC Mall | Shop for Electronics, Appliances, Toys and more
[2017-06-28 13:07:28] [Output] : ★ Bernard Bonavena walks over to the passenger side of the vehicle and wraps his hand around the axel.
[2017-06-28 13:07:33] [Output] : ★ Bernard Bonavena pulls the axel out from the rear end assembly.
[2017-06-28 13:08:04] [Output] : ★ Bernard Bonavena leans down and slowly pulls the rear differential from the rear end assembly.
[2017-06-28 13:08:17] [Output] : ★ Bernard Bonavena checks the pinion gear to make sure that it is in prestine condition.
[2017-06-28 13:08:36] [Output] : ★ Bernard Bonavena sets the old rear differential to the side and begins to scoop all of the old gear oil out
[2017-06-28 13:08:38] [Output] : ★ into the drain bucket.      ((Bernard Bonavena))
[2017-06-28 13:10:26] [Output] : ★ Bernard Bonavena removes the differential shims from the rear end assembly and sets them on a mat.
[2017-06-28 13:10:39] [Output] : ★ Bernard Bonavena grabs the new packaged rear differential and begins to open it up.
[2017-06-28 13:11:15] [Output] : ADVERT:  The Stinger - OPEN - Free beer, topless bartenders and false advertising! It's a pun. Loc. Montgomery
[2017-06-28 13:13:21] [Output] : ★ Bernard Bonavena removes the gears out from the new package and examines them.
[2017-06-28 13:14:38] [Output] : ★ Bernard Bonavena sets the ring gear down onto the carrier of the rear end.
[2017-06-28 13:14:52] [Output] : ★ Bernard Bonavena begins to torque the ring gear down onto the rear end carrier.
[2017-06-28 13:15:01] [Output] : ★ Bernard Bonavena torques down each botl of the ring gea into the carrier.
[2017-06-28 13:15:16] [Output] : ★ Bernard Bonavena picks up the carrier places the new carrier bearing onto the carrier.
[2017-06-28 13:15:30] [Output] : ★ Bernard Bonavena uses his hydrolic press to press the carrier bearing onto the new carrier.
[2017-06-28 13:15:58] [Output] : ★ Bernard Bonavena removes the pinion gear out from the rear diffrenetial.
[2017-06-28 13:16:19] [Output] : ★ Bernard Bonavena grabs his bearing racer remover and a hammer.
[2017-06-28 13:16:44] [Output] : ★ Bernard Bonavena bears the pinion bearing race out from the rear end assembly.
[2017-06-28 13:16:54] [Output] : ★ Bernard Bonavena beats the pinion bearing race out o the rear end assembly.
[2017-06-28 13:17:08] [Output] : ★ Bernard Bonavena then gets the new bearing race and sets it inside of the rear end assembly.
[2017-06-28 13:18:58] [Output] : ADVERT: Afghan delight | Afghan bakery, open now | Location: Free Rd  | #.
[2017-06-28 13:19:18] [Output] : ★ Bernard Bonavena gets the new pinion gear and new pinion bearing and uses his hydrolic hand press to
[2017-06-28 13:19:26] [Output] : ★ press the pinion bearing into the pinion gear.      ((Bernard Bonavena))
[2017-06-28 13:19:34] [Output] : ★ Bernard Bonavena fully seats he pinion bearing into the pinion gear.
[2017-06-28 13:19:50] [Output] : ★ Bernard Bonavena seats the pinion bearing into the rear end assembly.
[2017-06-28 13:19:53] [Output] : ADVERT: @Big Moe's | HUGE RENOVATION SALE | EVERYTHING MUST GO! | UP TO 60% OFF! | Located: http://imgur.com/a/cMimL
[2017-06-28 13:20:11] [Output] : ★ Bernard Bonavena then begins to shim the inside of the rear end.
[2017-06-28 13:20:33] [Output] : ★ Bernard Bonavena  keeps the shims in place and sets the ring gear and carrier, setting it into the rear end.
[2017-06-28 13:21:03] [Output] : ★ Bernard Bonavena gets under the vehicle and sets the pinion dept.
[2017-06-28 13:21:42] [Output] : ★ Bernard Bonavena grabs the new axels and uses his hydrolic press to press the new axel bearings in place.
[2017-06-28 13:21:54] [Output] : ★ Bernard Bonavena takes the new drivers side axel and presses the new axel bearing into place.
[2017-06-28 13:22:02] [Output] : ADVERT: [FOR SALE] 2004 NISSAN 350z $25,000 C/S.  | #449723
[2017-06-28 13:22:08] [Output] : ★ Bernard Bonavena grabs the new passenger side axel and seats the bearing into place.
[2017-06-28 13:22:20] [Output] : ★ Bernard Bonavena slides the new drivers side axel into the rear end assembly.
[2017-06-28 13:22:30] [Output] : ★ Bernard Bonavena grabs the old c-clip and sets the new axel into place.
[2017-06-28 13:22:39] [Output] : ★ Bernard Bonavena slides the passenger side axel into the rear end assembly.
[2017-06-28 13:23:02] [Output] : ★ Bernard Bonavena grabs the retention c-clip that keeps the axel in place and sets the rear passenger axel.
[2017-06-28 13:23:32] [Output] : ★ Bernard Bonavena kneels down with his torque wrench and begins to torque the rear diff plate into the rear
[2017-06-28 13:23:35] [Output] : ★ end.      ((Bernard Bonavena))
[2017-06-28 13:23:47] [Output] : ★ Bernard Bonavena torques all the bolts into the rear differential, doing a cross pattern.
[2017-06-28 13:24:30] [Output] : ★ Bernard Bonavena moves over to the drivers side of the vehicle and slides the rim and tire onto the axelstuds
[2017-06-28 13:24:44] [Output] : ★ Bernard Bonavena tightens the lug nuts with a tire iron to secure the drivers side tire to the axel.
[2017-06-28 13:24:58] [Output] : ★ Bernard Bonavena slides the rear passenger tire onto the axel studs.
[2017-06-28 13:25:15] [Output] : ★ Bernard Bonavena begins to tighten the five lugnuts onto the axel studs by hand, then tightening them with
[2017-06-28 13:25:17] [Output] : ★ the tire iron.      ((Bernard Bonavena))
[2017-06-28 13:25:26] [Output] : ★ Bernard Bonavena secures both rear tires onto the axels.
[2017-06-28 13:25:43] [Output] : ★ Bernard Bonavena grabs two big bottles of 75-90W gear oil and pours them into the fill port of the rear end.
[2017-06-28 13:25:49] [Output] : ★ Bernard Bonavena fills the rear end with fresh gear oil.
[2017-06-28 13:26:07] [Output] : ★ Bernard Bonavena grabs his floorjack and raises the rear end off the jackstands.
[2017-06-28 13:26:15] [Output] : ★ Bernard Bonavena removes both jackstands and lowers the vehi