nvOC-19_1_4-ra25_12xpalit_micron

#!/bin/bash

# nvOC v0019-1.4 by fullzero

# + contributors:

# BaliMiner: BaliMiner_TELEGRAM_ALERTS
# BaliMiner BTC address:  1HbzxQ6AVeWYvFm322KtxZcJJLAqfJHpN8

# damNmad: damNmad_ALGO_SPECIFIC_OC
#          nvOC discord channel https://discordapp.com/invite/8YDFEvY
#          Added Lots of COIN selections
#          Alternative telegram alert
# damNmad BTC address:  1Mtf6K7c3ZhBDcPz91c4wcQ95DxLn88zC

# IAmNotAJeep: IAmNotAJeep_and_Maxximus007_WATCHDOG
#              Methods for improved system stability
# IAmNotAJeep BTC address:  13PnEKpfVzNseWkrm6LoueKcCMPj74zPv7

# kk003: Alternative telegram alert ( very extensive )
#        Telegram Setup Video
# kk003 BTC address:  196pMZnByg5UaPvJPK67ErAHgDPeSyu8QV

# lost_post: upPASTE (timeout based _Parallax_ Mode auto-updating)
#            Methods for separating settings and implementation
#            Methods for AUTO_UPDATE
# lost_post BTC address:  1GFTEtLLvvwoa4ogDntD5oaXBgJLYokzTC

# Maxximus007: Maxximus007_AUTO_TEMPERATURE_CONTROL
#              Expectless 1bash
#          IAmNotAJeep_and_Maxximus007_WATCHDOG
# Maxximus007 BTC address:  1JAFefdPVAs3WQiTqnYWbsjifJAEjQcjQ8

# meligo: FAQ website nvoc-mining-os.com
# meligo BTC address:  1AwUJMztX2ARZp8ULqR5UsK3b27om8j3vq

# papampi: PAPAMPI_WTM_AUTO_SWITCH
#      PAPAMPI_WTM_PROFIT_CHECK
#      added multiple COIN selections
#          Alternative telegram alert and guide
# papampi BTC address:  1NsnsnqkkVuopTGvUSGrkMhhug8kg6zgP9

# _Parallax_:  _Parallax_ Mode ( wget + pastebin oneBash updating )
#              Methods for image size reduction
#              Methods for logging and system enhancements (with next version)
# _Parallax_ BTC address:  329k8rDgxHHcHAEXfwznqv25Go5LERGWLp

# salfter: SALFTER_NICEHASH_PROFIT_SWITCHING
#          SALFTER_MPH_PROFIT_SWITCHING
# salfter BTC address:  1TipsGocnz2N5qgAm9f7JLrsMqkb3oXe2

# xleejohnx: SRR support
# xleejohnx BTC address:  1EY5WbiW3YkWanSKEGcjCETpQfCR81wc56

# Open a terminal to launch miner; will auto launch on boot

# firefox has an OP bookmark; look at the OP for more information

# USE ALL CAPS

# CHOOSE COIN FROM:

#ALGO - X11-GOST
######### SIB

#ALGO - CryptoNight
######### XMR  KRB

#ALGO - Skunk
######### SIGT  ZPOOL_SKUNK

#ALGO - Ethash
######### ETH  ETC  EXP  UBQ  MUSIC  SOIL

#ALGO - Equihash
######### ZEC  ZEN  HUSH  ZCL  KMD

#ALGO - NiceHash
######### DUAL_NICEHASH (Ethash + Decred)  NICE_EQUIHASH  NICE_ETHASH

#ALGO - X13
######### ONION

#ALGO - Neoscrypt
######### PXC  FTC  ORB

#ALGO - Myriad-Groestl
######### XMY

#ALGO - LYRA2V2
######### MONA  VTC  ZCOIN

#ALGO - SKEIN
######### DGB

#ALGO - GROESTL
######### GRS

#ALGO - SIA
######### SIA

#ALGO - LBRY
######### LBC (LBRY)

#ALGO - Decred
######### DCR

#ALGO - Pascal
######### PASC PASL

#ALGO - timetravel10
######### BTX

#TYPE - Zpool (auto converts to BTC)
######### ZPOOL_LYRA2V2  ZPOOL_BLAKE2S  ZPOOL_EQUIHASH  ZPOOL_LBC  ZPOOL_NEOSCRYPT  ZPOOL_LBRY  ZPOOL_SKEIN

#TYPE - DUAL Claymore (ETHASH + DCR/LBC/PASC/PASL/SC)
######### DUAL_ETH_DCR    DUAL_ETH_PASC    DUAL_ETH_PASL    DUAL_ETH_LBC    DUAL_ETH_SC
######### DUAL_ETC_DCR    DUAL_ETC_PASC    DUAL_ETC_PASL    DUAL_ETC_LBC    DUAL_ETC_SC
######### DUAL_EXP_DCR    DUAL_EXP_PASC    DUAL_EXP_PASL    DUAL_EXP_LBC    DUAL_EXP_SC
######### DUAL_MUSIC_DCR  DUAL_MUSIC_PASC  DUAL_MUSIC_PASL  DUAL_MUSIC_LBC  DUAL_MUSIC_SC
######### DUAL_UBQ_DCR    DUAL_UBQ_PASC    DUAL_UBQ_PASL    DUAL_UBQ_LBC    DUAL_UBQ_SC
######### DUAL_SOIL_DCR   DUAL_SOIL_PASC   DUAL_SOIL_PASL   DUAL_SOIL_LBC   DUAL_SOIL_SC

#TYPE - Miningpoolhub Auto Coin Switches based on Algo
######### MPH_ETHASH  MPH_EQUIHASH

#TYPE - Profit Switchers
######### SALFTER_NICEHASH_PROFIT_SWITCHING
######### SALFTER_MPH_PROFIT_SWITCHING

### NEW COINS THIS VERSION:

######### BTCZ
######### SMART

COIN="ETH"

#####################################################
#                                                   #
# I highly recommend trying PAPAMPI_WTM_AUTO_SWITCH #
#                                                   #
#####################################################

PAPAMPI_WTM_AUTO_SWITCH="NO"  #( whattomine.com switcher) remember to disable Parallax MODE (_Parallax_MODE="NO")

PAPAMPI_WTM_PROFIT_INFO="NO" # whattomine.com Profit check for web info

# note!! all selected COINS must HAVE ADDRESSES below (no need address if switch=no and profit=yes )
# select which coins you want to mine/check profit (profit switch only using this list of coins) it will auto switch/check profit of your COIN selection from this list using whattomine.com

WTM_AUTO_SWITCH_COINS="ZEC;ETH" ### note format is changed to reduce errors: "ZEC;ETH;ETC;XMR"

WTM_AUTO_SWITCH_SYNC_INTERVAL="3" # Time to sync with WTM for best coin

WTM_PROFIT_CHECK_INTERVAL="60" # interval between checking profit for web info

WTM_MIN_DIFFERENCE="7" # Mininumum difference in percent when switch to new coin, to prevent too many switches.

WTM_CURRENCY="USD" # USD, AUD, BRL, CAD, CHF, CLP, CNY, DKK, EUR, GBP, HKD, INR, ISK, JPY, KRW, NZD, PLN, RUB, SEK, SGD, THB, TWD

WTM_AUTO_SWITCH_URL="https://whattomine.com/coins.json"

##Go to [ https://whattomine.com/coins ] select your cards, hash rate, power.
#You can also select to mine base on current, 24    hour, 3 day or a week profit and difficulty.
#Dont forget to choose same for both profit and difficulty or it will give wrong results.
#Click calculate, then add .json to coins at the begining of the address after you click calculate!!!

Maxximus007_AUTO_TEMPERATURE_CONTROL="NO"

IAmNotAJeep_and_Maxximus007_WATCHDOG="YES"

# SET OC and POWERLIMIT by ALGO (see end of 1bash for ALGO OC settings)
# for OPT use of PAPAMPI_WTM_AUTO_SWITCH use damNmad_ALGO_SPECIFIC_OC !!
damNmad_ALGO_SPECIFIC_OC="NO"

# LOCAL will attach the mining process to the gnome or guake terminal
# REMOTE will leave it unattached / ready for SSH
LOCALorREMOTE="REMOTE"          # LOCAL  or  REMOTE

TEAMVIEWER="YES"                 # YES NO

SSH="YES"                       # YES NO

POWERLIMIT="YES"                # YES NO

    POWERLIMIT_WATTS=90

__CORE_OVERCLOCK=-150
MEMORY_OVERCLOCK=740

MANUAL_FAN="YES"                # YES NO

    FAN_SPEED=100            # Set fan speed if MANUAL_FAN="YES"

# GLOBAL_WORKERNAME will use a single worker name for all coins
GLOBAL_WORKERNAME="YES"         # YES NO

    # HOST will use the rigs host address
    # MAC will use the rigs NIC's MAC address
    # CUSTOM will use your own
#   AUTO_WORKERNAME="HOST"         # HOST  or  MAC  or  CUSTOM
AUTO_WORKERNAME="CUSTOM"         # HOST  or  MAC  or  CUSTOM

    # if AUTO_WORKERNAME="CUSTOM"
    CUSTOM_WORKERNAME="nvOCra25"

# BETA will pull the newest unverified updates
# STABLE will only pull verified updates
# pull updates by entering: 4update
# in the guake terminal and pressing enter
AUTO_UPDATE="STABLE"         # STABLE  or  BETA

_Parallax_MODE="YES"             # YES NO

    pasteBASH="8kK81TvY"

    upPASTE_TIMEOUT_IN_MINUTES=30

CLEAR_LOGS_ON_BOOT="NO"         # YES NO


# kk003's video tutorial how to create a telegram bot and get Api Key + User Id:
# https://youtu.be/HS7Q1zH00bs
BaliMiner_TELEGRAM_ALERTS="NO"

    TELEGRAM_TYPE="papampi" # kk003 or papampi or damNmad or BaliMiner

    TELEGRAM_TIMEOUT_IN_MINUTES=30

    TELEGRAM_CHATID="your_CHATID_here"

    TELEGRAM_APIKEY="your_APIKEY_here"

# Mine XMR with CPU
plusCPU="NO"                # YES NO

    threadCOUNT="1"                 # Number of threads for plusCPU: varies per CPU

P106_100_FULL_HEADLESS_MODE="YES"

AUTO_REBOOT="YES"

    REBOOT_TIMEOUT_IN_MINUTES=2880  # once every 48 hours

# If you are using a slow USB Key
SLOW_USB_KEY_MODE="NO"          # YES NO

GPUPowerMizerMode_Adjust="NO"

    # Set PowerMizerMode
    GPUPowerMizerMode=1

SRR="NO"                        # YES NO
    SRR_SERIAL="000055"
    __SRR_SLOT="1"


#######################################################################################

# Maxximus007_AUTO_TEMPERATURE_CONTROL

# Set the target temperature; Recommended ranges: 55 - 75.  Don't set it too low, if the temperature can't be reached with fan adjustments it will decrease power.  If the actual temp is above the target temp this script will up the fan speed.  If actual temp is above value set above and fan speed is 100, the script will lower the power limit.

TARGET_TEMP=63

__FAN_ADJUST=5      # Adjustment size in percent

POWER_ADJUST=5     # Adjustment size in watts

# Difference in actual temperature allowed before action:  Works only if current is BELOW target temp

ALLOWED_TEMP_DIFF=3

# Restore original power limit if fan speed is lower than this percentage

RESTORE_POWER_LIMIT=90

# lowest fan speed that will be used
MINIMAL_FAN_SPEED=100

#minimal draw power that will be used
MINIMAL_POWER=90

########################################################################################
#GLOBAL_WORKERNAME implementation
IPW=$(ifconfig | sed -En 's/127.0.0.1//;s/.*inet (addr:)?(([0-9]*\.){3}[0-9]*).*/\2/p')
IP_AS_WORKER=$(echo -n $IPW | tail -c -3 | sed 'y/./0/')
MAC=$(ifconfig -a | grep -Po 'HWaddr \K.*$')
MAC_AS_WORKER=$(echo -n $MAC | sed 'y/:/_/')
if [ $GLOBAL_WORKERNAME == "YES" ]
then
if [ $AUTO_WORKERNAME == "HOST" ]
then
WORKERNAME=$IP_AS_WORKER
fi
if [ $AUTO_WORKERNAME == "MAC" ]
then
WORKERNAME=$MAC_AS_WORKER
fi
if [ $AUTO_WORKERNAME == "CUSTOM" ]
then
WORKERNAME=$CUSTOM_WORKERNAME
fi
fi
########################################################################################

# set YOUR ADDRESSES, WORKERS, POOL, INTENSITY and PORT:

ZM_or_EWBF="ZM"  # choose  ZM  or  EWBF

ZEC_WORKER="$WORKERNAME"
# replace_with_your_ZEC_address
ZEC_ADDRESS="t1XfkZUZWME8FnRiFxHZQAQ2K1UdQMbshJp"
ZEC_POOL="zec-us-east1.nanopool.org"
ZEC_PORT="6666"

EWBF_VERSION="3_4" # choose 3_3  or  3_4

# change EWBF_PERCENT to alter donation percent for EWBF Miner
EWBF_PERCENT=0

#ZClassic
ZCL_WORKER=$WORKERNAME
ZCL_ADDRESS="replace_with_your_ZCL_address"
ZCL_POOL="us.zclmine.pro"
ZCL_PORT="9009"

#For Nice Equihash
NICE_EQUIHASH_WORKER=$WORKERNAME
NICE_EQUIHASH_ADDRESS=$BTC_ADDRESS
NICE_EQUIHASH_POOL="equihash.usa.nicehash.com"
NICE_EQUIHASH_PORT="3357"

KMD_WORKER=$WORKERNAME
KMD_ADDRESS="replace_with_your_KMD_address"
KMD_POOL="luckpool.org"
KMD_PORT="3857"

ZEN_WORKER=$WORKERNAME
ZEN_ADDRESS="replace_with_your_ZEN_address"
ZEN_POOL="luckpool.org"
ZEN_PORT="3057"

#For BTX
BTX_WORKER="yourSuprNovaWorker"
BTX_ADDRESS="yourSuprNovaLogin"
BTX_POOL="stratum+tcp://btx.suprnova.cc:3629"
BTX_INTENSITY="21"

#ZDASH or HUSH
HUSH_WORKER=$WORKERNAME
HUSH_ADDRESS="replace_with_your_HUSH_address"
HUSH_POOL="luckpool.org"
HUSH_PORT="3757"

#XZC or ZCOIN
ZCOIN_WORKER="Your Miningpoolhub Worker Name"
ZCOIN_ADDRESS="replace_with_your_miningpoolhub_account login name"
ZCOIN_POOL="us-east.lyra2z-hub.miningpoolhub.com:20581"

#KRB
KRB_ADDRESS="replace_with_your_KRB_address"
KRB_POOL="stratum+tcp://krb.sberex.com:5555"

SIGT_WORKER=$WORKERNAME
SIGT_ADDRESS="replace_with_your_SIGT_address"
SIGT_POOL="stratum+tcp://us.hashbag.cc:8644"
SIGT_INTENSITY="25"

SIB_WORKER="Your Suprnova Worker name"
SIB_ADDRESS="Your Suprnova Account name"
SIB_POOL="stratum+tcp://sib.suprnova.cc:3458"
SIB_INTENSITY="21"

PXC_WORKER="$WORKERNAME"
PXC_ADDRESS="replace_with_your_GRS_address"
PXC_POOL="stratum+tcp://atlas.phoenixcoin.org:10554"
PXC_INTENSITY="23"

# ZPOOL_SKUNK HERE
# if YES ensure you update BTC_ADDRESS
SKUNK_AUTOCONVERT_TO_BTC="YES"        #YES  NO
SKUNK_WORKER="$WORKERNAME"
SKUNK_ADDRESS=$BTC_ADDRESS
SKUNK_POOL="stratum+tcp://skunk.mine.zpool.ca:8433"
SKUNK_INTENSITY="22"

# Used to add worker name on ZPOOL
ZPOOLPASS="$WORKERNAME,c=btc"

# ZPOOL uses your BTC_ADDRESS
ZPOOL_LYRA2V2_POOL="stratum+tcp://lyra2v2.mine.zpool.ca:4533"
ZPOOL_LYRA2V2_INTENSITY="22"

# ZPOOL uses your BTC_ADDRESS
ZPOOL_BLAKE2S_POOL="stratum+tcp://blake2s.mine.zpool.ca:5766"
ZPOOL_BLAKE2S_INTENSITY="21"

# ZPOOL uses your BTC_ADDRESS
ZPOOL_EQUIHASH_POOL="equihash.mine.zpool.ca"
ZPOOL_EQUIHASH_PORT="2142"

# ZPOOL uses your BTC_ADDRESS
ZPOOL_LBRY_POOL="stratum+tcp://lbc.mine.zpool.ca:3334"
ZPOOL_LBRY_INTENSITY="23"

# ZPOOL uses your BTC_ADDRESS
ZPOOL_NEOSCRYPT_POOL="stratum+tcp://neoscrypt.mine.zpool.ca:4233"
ZPOOL_NEOSCRYPT_INTENSITY="22"

# ZPOOL uses your BTC_ADDRESS
ZPOOL_SKEIN_POOL="stratum+tcp://skein.mine.zpool.ca:4933"
ZPOOL_SKEIN_INTENSITY="22"

#MPH_EQUIHASH
MPH_WORKER="Your Miningpoolhub Worker Name"
MPH_ADDRESS="Your Miningpoolhub account name"
MPH_EQUIHASH_POOL="us-east.equihash-hub.miningpoolhub.com"
MPH_EQUIHASH_PORT="20570"

#MPH_ETHASH
MPH_WORKER="Your Miningpoolhub Worker Name"
MPH_ADDRESS="Your Miningpoolhub account name"
MPH_ETHASH_POOL="us-east.ethash-hub.miningpoolhub.com:17020"

GRS_WORKER=$WORKERNAME
GRS_ADDRESS="replace_with_your_GRS_address"
GRS_POOL="stratum+tcp://moria.dwarfpool.com:3345"
GRS_INTENSITY="23"

XMY_WORKER="Your Miningpoolhub Worker Name"
XMY_ADDRESS="Your Miningpoolhub Account Name"
XMY_POOL="stratum+tcp://us-east1.myriadcoin-groestl.miningpoolhub.com:20479"
XMY_INTENSITY="23"

MONA_WORKER="Your Suprnova Worker name"
MONA_ADDRESS="Your Suprnova Account name"
MONA_POOL="stratum+tcp://mona.suprnova.cc:2995"
MONA_INTENSITY="21"

# if YES ensure you update BTC_ADDRESS
VTC_AUTOCONVERT_TO_BTC="NO"        #YES  NO
VTC_WORKER="Your Miningpoolhub Worker Name"
VTC_ADDRESS="Your Miningpoolhub Account Name"
VTC_POOL="stratum+tcp://hub.miningpoolhub.com:20507"
VTC_INTENSITY="21"


BTC_ADDRESS="replace_with_your_BTC_address"


# NICE_ETHASH autoconverts to BTC: ensure you update BTC_ADDRESS if you use NICE_ETHASH
NICE_ETHASH_WORKER="$WORKERNAME"
NICE_ETHASH_POOL="stratum+tcp://daggerhashimoto.usa.nicehash.com:3353"
GENOIL_NICE_ETHASH_POOL="daggerhashimoto.usa.nicehash.com:3353"
NICE_ETHASH_EXTENSION_ARGUMENTS=""   # add any additional claymore arguments desired here

# if YES ensure you update BTC_ADDRESS
DGB_AUTOCONVERT_TO_BTC="NO"        #YES  NO
DGB_INTENSITY="24"
DGB_WORKER="Your Miningpoolhub Worker Name"
DGB_ADDRESS="Your Miningpoolhub Account Name"
DGB_POOL="stratum+tcp://hub.miningpoolhub.com:20527"

LBC_WORKER="Your Suprnova Worker name"
LBC_ADDRESS="Your Suprnova Account name"
LBC_POOL="stratum+tcp://lbry.suprnova.cc:6256"
LBC_INTENSITY="23"

FTC_WORKER="Your Miningpoolhub Worker Name"
FTC_ADDRESS="Your Miningpoolhub Account Name"
FTC_POOL="stratum+tcp://hub.miningpoolhub.com:20510"
FTC_INTENSITY="23"

ORB_WORKER="Your DNB Worker Name"
ORB_ADDRESS="Your DNB Account Name"
ORB_POOL="stratum+tcp://strat.dnb.io:3031"
ORB_INTENSITY="23"

ONION_ADDRESS="replace_with_your_ONION_address"
ONION_POOL="stratum+tcp://kawaiipool.party:3633"


USE_ENVIRONMENTAL_VARIBLES="NO"   #YES  NO

# NOTE DEFAULT CHANGED FROM SLASH to DOT
DOT_POOL_FORMAT_or_FORWARD_SLASH_POOL_FORMAT="DOT"    # DOT  or  SLASH    # formerly ETHERMINEdotORG

CLAYMORE_VERSION="10_0"    # choose 10_0  or  9_8  or  9_7  or  9_5  or  9_4  or  8_0

ETHMINER_or_GENOIL_or_CLAYMORE="CLAYMORE"  # choose  ETHMINER  or  GENOIL  or  CLAYMORE


ETH_WORKER=$WORKERNAME
# replace_with_your_ETH_address
ETH_ADDRESS="0xd6CA816507CeccD271A0B0279Ca1967EabbCf084"
# NOTE DEFAULT ETH POOL CHANGED TO ETHERMINE.ORG
ETH_POOL="eth-ru.dwarfpool.com:8008"
ETH_EXTENSION_ARGUMENTS="-eworker nvOCra25"
#ETH_EXTENSION_ARGUMENTS=""    # add any additional claymore arguments desired here

ETC_WORKER=$WORKERNAME
ETC_ADDRESS="replace_with_your_ETC_address"
# NOTE DEFAULT ETC POOL CHANGED TO ETHERMINE.ORG
ETC_POOL="us1-etc.ethermine.org:4444"
ETC_EXTENSION_ARGUMENTS=""    # add any additional claymore arguments desired here

EXP_WORKER=$WORKERNAME
EXP_ADDRESS="replace_with_your_EXP_address"
EXP_POOL="exp-us.dwarfpool.com:81"
EXP_EXTENSION_ARGUMENTS=""   # add any additional claymore arguments desired here

UBQ_WORKER=$WORKERNAME
UBQ_ADDRESS="replace_with_your_UBIQ_address"
UBQ_POOL="stratum+tcp://us.ubiqpool.io:8008"
UBQ_EXTENSION_ARGUMENTS=""

MUSIC_WORKER=$WORKERNAME
MUSIC_ADDRESS="replace_with_your_MUSIC_address"
MUSIC_POOL="eus.gmc.epool.io:8008"
MUSIC_EXTENSION_ARGUMENTS=""

SOIL_WORKER=$WORKERNAME
SOIL_ADDRESS="replace_with_your_SOIL_address"
SOIL_POOL="stratum+tcp://soil.pool.sexy:9009"
SOIL_EXTENSION_ARGUMENTS=""

DUAL_WORKER=$WORKERNAME
DUAL_BTC_ADDRESS=$BTC_ADDRESS
DUAL_ETHASH_POOL="stratum+tcp://daggerhashimoto.usa.nicehash.com:3353"
DUAL_DCR_POOL="stratum+tcp://decred.usa.nicehash.com:3354"
DUAL_EXTENSION_ARGUMENTS="-dcri 40"

SC_WORKER=$WORKERNAME
SC_ADDRESS="replace_with_your_SIA_address"
SC_POOL="sia-us-east1.nanopool.org:7777"
SC_GW_POOL="sia-us-east1.nanopool.org:9980"

DCR_WORKER=$WORKERNAME
DCR_ADDRESS="replace_with_your_DCR_address"
DCR_POOL="stratum+tcp://yiimp.eu:3252"

PASC_WORKER=$WORKERNAME
PASC_ADDRESS="replace_with_your_PASC_ACCOUNT"
PASC_POOL="pasc-us-east1.nanopool.org:15555"

PASL_WORKER=$WORKERNAME
PASL_ADDRESS="replace_with_your_PASL_ACCOUNT"
PASL_POOL="stratum+tcp://mine.pasl.fairpool.xyz:4009"

# if plusCPU is "YES" replace with your XMR info
XMR_WORKER=$WORKERNAME
XMR_ADDRESS="replace_with_your_XMR_address"
XMR_POOL="xmr-us-east1.nanopool.org:14444"

BTCZ_WORKER="yourSuprnovaWorkerName"
BTCZ_ADDRESS="yourSuprnovaLoginName"
BTCZ_POOL="btcz.suprnova.cc"
BTCZ_PORT="5586"

SMART_WORKER="yourWorkerName"
SMART_ADDRESS="yourPoolLoginName"
SMART_POOL="stratum+tcp://pool-eu.smartcash.cc:3333"
SMART_INTENSITY="25"

######################################################################################

# SALFTER_NICEHASH_PROFIT_SWITCHING & SALFTER_MPH_PROFIT_SWITCHING Settings

CURRENCY=USD

POWER_COST=0.20

MINIMUM_PROFIT=0.0

MPH_USERNAME=replace_with_your_MPH_username

# this is salfters BTC address:  1TipsGocnz2N5qgAm9f7JLrsMqkb3oXe2

PAYMENT_ADDRESS=replace_with_your_BTC_address

WORKER_NAME=$WORKERNAME

PROFIT_CHECK_TIMEOUT=600

# ENSURE YOU USE Maxximus007_AUTO_TEMPERATURE_CONTROL for fanspeed

daggerhashimoto_POWERLIMIT_WATTS=120
__daggerhashimoto_CORE_OVERCLOCK=100
daggerhashimoto_MEMORY_OVERCLOCK=100

equihash_POWERLIMIT_WATTS=120
__equihash_CORE_OVERCLOCK=100
equihash_MEMORY_OVERCLOCK=100

neoscrypt_POWERLIMIT_WATTS=120
__neoscrypt_CORE_OVERCLOCK=100
neoscrypt_MEMORY_OVERCLOCK=100

lyra2rev2_POWERLIMIT_WATTS=120
__lyra2rev2_CORE_OVERCLOCK=100
lyra2rev2_MEMORY_OVERCLOCK=100

lbry_POWERLIMIT_WATTS=120
__lbry_CORE_OVERCLOCK=100
lbry_MEMORY_OVERCLOCK=100

Blake_Vanilla_POWERLIMIT_WATTS=120
__Blake_Vanilla_CORE_OVERCLOCK=100
Blake_Vanilla_MEMORY_OVERCLOCK=100

Cryptonight_POWERLIMIT_WATTS=120
__Cryptonight_CORE_OVERCLOCK=100
Cryptonight_MEMORY_OVERCLOCK=100

Groestl_POWERLIMIT_WATTS=120
__Groestl_CORE_OVERCLOCK=100
Groestl_MEMORY_OVERCLOCK=100

Keccak_POWERLIMIT_WATTS=120
__Keccak_CORE_OVERCLOCK=100
Keccak_MEMORY_OVERCLOCK=100

Myriad_Groestl_POWERLIMIT_WATTS=120
__Myriad_Groestl_CORE_OVERCLOCK=100
Myriad_Groestl_MEMORY_OVERCLOCK=100

Qubit_POWERLIMIT_WATTS=120
__Qubit_CORE_OVERCLOCK=100
Qubit_MEMORY_OVERCLOCK=100

Scrypt_POWERLIMIT_WATTS=120
__Scrypt_CORE_OVERCLOCK=100
Scrypt_MEMORY_OVERCLOCK=100

Sia_POWERLIMIT_WATTS=120
__Sia_CORE_OVERCLOCK=100
Sia_MEMORY_OVERCLOCK=100

Skein_POWERLIMIT_WATTS=120
__Skein_CORE_OVERCLOCK=100
Skein_MEMORY_OVERCLOCK=100

X11_POWERLIMIT_WATTS=120
__X11_CORE_OVERCLOCK=100
X11_MEMORY_OVERCLOCK=100

# settings below are for rigs using individual powerlimit / target temps / clocks only

###########################################################################
###########################################################################
###########################################################################
###########################################################################
###########################################################################
###########################################################################
###########################################################################
###########################################################################

INDIVIDUAL_POWERLIMIT="NO"      # YES NO

# Set individual powerlimits here if INDIVIDUAL_POWERLIMIT="YES"
INDIVIDUAL_POWERLIMIT_0=100
INDIVIDUAL_POWERLIMIT_1=100
INDIVIDUAL_POWERLIMIT_2=100
INDIVIDUAL_POWERLIMIT_3=100
INDIVIDUAL_POWERLIMIT_4=100
INDIVIDUAL_POWERLIMIT_5=100
INDIVIDUAL_POWERLIMIT_6=100
INDIVIDUAL_POWERLIMIT_7=100
INDIVIDUAL_POWERLIMIT_8=100
INDIVIDUAL_POWERLIMIT_9=100
INDIVIDUAL_POWERLIMIT_10=100
INDIVIDUAL_POWERLIMIT_11=100
INDIVIDUAL_POWERLIMIT_12=100
INDIVIDUAL_POWERLIMIT_13=100
INDIVIDUAL_POWERLIMIT_14=100
INDIVIDUAL_POWERLIMIT_15=100
INDIVIDUAL_POWERLIMIT_16=100
INDIVIDUAL_POWERLIMIT_17=100
INDIVIDUAL_POWERLIMIT_18=100


INDIVIDUAL_TARGET_TEMPS="NO"    # YES NO

# Set individual target temps here if INDIVIDUAL_TARGET_TEMPS="YES"
TARGET_TEMP_0=70
TARGET_TEMP_1=70
TARGET_TEMP_2=70
TARGET_TEMP_3=70
TARGET_TEMP_4=70
TARGET_TEMP_5=70
TARGET_TEMP_6=70
TARGET_TEMP_7=70
TARGET_TEMP_8=70
TARGET_TEMP_9=70
TARGET_TEMP_10=70
TARGET_TEMP_11=70
TARGET_TEMP_12=70
TARGET_TEMP_13=70
TARGET_TEMP_14=70
TARGET_TEMP_15=70
TARGET_TEMP_16=70
TARGET_TEMP_17=70
TARGET_TEMP_18=70


INDIVIDUAL_CLOCKS="NO"          # YES NO

# Set individual clocks here if INDIVIDUAL_CLOCKS="YES"
__CORE_OVERCLOCK_0=0
MEMORY_OVERCLOCK_0=1300

__CORE_OVERCLOCK_1=0
MEMORY_OVERCLOCK_1=1300

__CORE_OVERCLOCK_2=0
MEMORY_OVERCLOCK_2=1300

__CORE_OVERCLOCK_3=0
MEMORY_OVERCLOCK_3=1300

__CORE_OVERCLOCK_4=0
MEMORY_OVERCLOCK_4=1300

__CORE_OVERCLOCK_5=0
MEMORY_OVERCLOCK_5=1300

__CORE_OVERCLOCK_6=0
MEMORY_OVERCLOCK_6=1300

__CORE_OVERCLOCK_7=0
MEMORY_OVERCLOCK_7=1300

__CORE_OVERCLOCK_8=0
MEMORY_OVERCLOCK_8=1300

__CORE_OVERCLOCK_9=0
MEMORY_OVERCLOCK_9=1300

__CORE_OVERCLOCK_10=0
MEMORY_OVERCLOCK_10=1300

__CORE_OVERCLOCK_11=0
MEMORY_OVERCLOCK_11=1100

__CORE_OVERCLOCK_12=0
MEMORY_OVERCLOCK_12=1300

__CORE_OVERCLOCK_13=100
MEMORY_OVERCLOCK_13=100

__CORE_OVERCLOCK_14=100
MEMORY_OVERCLOCK_14=100

__CORE_OVERCLOCK_15=100
MEMORY_OVERCLOCK_15=100

__CORE_OVERCLOCK_16=100
MEMORY_OVERCLOCK_16=100

__CORE_OVERCLOCK_17=100
MEMORY_OVERCLOCK_17=100

__CORE_OVERCLOCK_18=100
MEMORY_OVERCLOCK_18=100


# OC settings you can use based on COIN or ALGO (how ever you want to categorize them)

if [ $damNmad_ALGO_SPECIFIC_OC == "YES" ]
then

# Neoscrypt

if [ $COIN == "FTC" -o $COIN == "ORB" -o $COIN == "PXC" ]
then
POWERLIMIT_WATTS=80
__CORE_OVERCLOCK=150
MEMORY_OVERCLOCK=800
fi

# Ethash

if [ $COIN == "ETH" -o $COIN == "ETC" -o $COIN == "EXP" -o $COIN == "UBQ" -o $COIN == "MUSIC" -o $COIN == "SOIL" -o $COIN == "MPH_ETHASH" -o $COIN == "NICE_ETHASH" ]
then
POWERLIMIT_WATTS=76
__CORE_OVERCLOCK=100
MEMORY_OVERCLOCK=1600
fi

# Equihash

if [ $COIN == "ZEC" -o $COIN == "ZEN" -o $COIN == "HUSH" -o $COIN == "ZCL" -o $COIN == "KMD" -o $COIN == "ZPOOL_EQUIHASH" -o $COIN == "MPH_EQUIHASH" -o $COIN == "NICE_EQUIHASH" -o $COIN == "VOTE" ]
then
POWERLIMIT_WATTS=76
__CORE_OVERCLOCK=150
MEMORY_OVERCLOCK=800
fi

# Skunk

if [ $COIN == "SIGT" -o $COIN == "ZPOOL_SKUNK" ]
then
POWERLIMIT_WATTS=78
__CORE_OVERCLOCK=150
MEMORY_OVERCLOCK=1000
fi

# Cryptonight

if [ $COIN == "XMR" -o $COIN == "KRB" ]
then
POWERLIMIT_WATTS=62
__CORE_OVERCLOCK=155
MEMORY_OVERCLOCK=-300
fi

# lyra2v2

if [ $COIN == "MONA" -o $COIN == "VTC" ]
then
POWERLIMIT_WATTS=65
__CORE_OVERCLOCK=135
MEMORY_OVERCLOCK=-1200
fi

# ZCOIN lyra2v2

if [ $COIN == "ZCOIN" ]
then
POWERLIMIT_WATTS=65
__CORE_OVERCLOCK=160
MEMORY_OVERCLOCK=-1000
fi
fi