API tools faq
paste
Advertisement
Guest User

uboot on musebook (via UART)

a guest
Sep 3rd, 2024
48
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 56.56 KB | None | 0 0
raw download clone embed print report
  1. sys: 0x200
  2. try sd...
  3. bm:3
  4. ERROR: CMD8
  5. ERROR: sd f! l:76
  6. bm:4
  7. nor m:0xa1 d:0x4017
  8. j...
  9.  
  10. U-Boot SPL 2022.10spacemit-dirty (Aug 02 2024 - 08:16:27 +0000)
  11. DDR type LPDDR4X
  12. lpddr4_silicon_init consume 11ms
  13. Change DDR data rate to 2400MT/s
  14. Boot from fit configuration k1-x_MUSE-Book
  15. ## Checking hash(es) for config conf_11 ... OK
  16. ## Checking hash(es) for Image uboot ... crc32+ OK
  17. ## Checking hash(es) for Image fdt_11 ... crc32+ OK
  18. ## Checking hash(es) for config config_1 ... OK
  19. ## Checking hash(es) for Image opensbi ... crc32+ OK
  20.  
  21.  
  22. U-Boot 2022.10spacemit-dirty (Aug 02 2024 - 08:16:27 +0000), Build: jenkins-BSP-build-deb-156
  23.  
  24. CPU: rv64imafdcv
  25. Model: M1-MUSE-BOOK
  26. DRAM: DDR size = 16384 MB
  27. DDR size = 16384 MB
  28. DDR size = 16384 MB
  29. 16 GiB
  30. [RESET]probe start
  31. [RESET]probe finish
  32. DCDC_REG1@dcdc1: ; enabling
  33. DCDC_REG2@dcdc2: ; enabling
  34. DCDC_REG3@dcdc3: ; enabling
  35. DCDC_REG4@dcdc4: ; enabling
  36. DCDC_REG5@dcdc5: ; enabling
  37. DCDC_REG6@dcdc6: ; enabling
  38. LDO_REG1@ldo1: ; enabling
  39. LDO_REG2@ldo2: ; enabling
  40. LDO_REG3@ldo3: ; enabling
  41. LDO_REG4@ldo4: ; enabling
  42. LDO_REG5@ldo5: ; enabling
  43. LDO_REG6@ldo6: ; enabling
  44. LDO_REG7@ldo7: ; enabling
  45. LDO_REG8@ldo8: ; enabling
  46. LDO_REG9@ldo9: ; enabling
  47. LDO_REG10@ldo10: ; enabling
  48. LDO_REG11@ldo11: ; enabling
  49. SWITCH_REG1@switch1: ; enabling
  50. DDR size = 16384 MB
  51. Core: 400 devices, 28 uclasses, devicetree: board
  52. WDT: Started PMIC_WDT with servicing (60s timeout)
  53. WDT: Started watchdog@D4080000 with servicing (60s timeout)
  54. MMC: sdh@d4280000: probe done.
  55. sdh@d4281000: probe done.
  56. sdh@d4280000: 0, sdh@d4281000: 2
  57. Loading Environment from SPIFlash... k1x_qspi spi@d420c000: qspi iobase:0x0x00000000d420c000, ahb_addr:0x0x00000000b8000000, max_hz:26500000Hz
  58. k1x_qspi spi@d420c000: rx buf size:128, tx buf size:256, ahb buf size=512
  59. k1x_qspi spi@d420c000: AHB read enabled
  60. k1x_qspi spi@d420c000: bus clock: 26500000Hz, PMUap reg[0xd4282860]:0x0000075b
  61. k1x_qspi spi@d420c000: AHB buf size: 512
  62. SF: Detected FM25Q64AI3 with page size 256 Bytes, erase size 4 KiB, total 8 MiB
  63. OK
  64. pcie_dw_k1x_probe, 651
  65. Now init Rterm...
  66. pcie prot id = 2, porta_init_done = 0
  67. Now waiting portA resister tuning done...
  68. porta redonly_reg2: 00006d48
  69. pcie_rcal = 0x00006d48
  70. pcie port id = 2, lane num = 2
  71. Now int init_puphy...
  72. waiting pll lock...
  73. Now finish init_puphy....
  74. pcie_dw_k1x pcie@ca800000: Unable to get phy0pcie_dw_k1x pcie@ca800000: Unable to get phy1PCIE-0: Link up (Gen2-x2, Bus0)
  75. detect available blk:nvme
  76. detect available blk:nvme
  77. Found device 'mipi@d421a800', disp_uc_priv=000000007decffd0
  78. spacemit_panel_of_to_plat panel lt8911ext_edp_1080p
  79. Panel is lt8911ext_edp_1080p
  80. fb=7f700000, size=1920 1080
  81. initialize_console_log_buffer
  82. Have allocated memory for console log buffer
  83. In: serial
  84. Out: serial
  85. Err: serial
  86. Default to 100kHz
  87. EEPROM: TlvInfo v1 len=53
  88. valid ethaddr: fe:fe:fe:7c:a9:75
  89. Serial number is valid.
  90. Cannot find TLV data: part#
  91. Cannot find TLV data: manufacture_date
  92. Cannot find TLV data: manufacturer
  93. Cannot find TLV data: device_version
  94. Cannot find TLV data: sdk_version
  95. Read PMIC reg ab value f0
  96. sdh@d4280000: 74 clk wait timeout(100)
  97. MMC: no card present
  98. mmc_init: -123, time 5
  99. detect available blk:nvme
  100. 79 bytes read in 0 ms
  101. ## Info: input data size = 80 = 0x50
  102. load env_k1-x.txt from bootfs successful
  103. detect available blk:nvme
  104. Net: No ethernet found.
  105. Autoboot in 0 seconds
  106. Try to boot from nvme0 ...
  107. get rootfs_part index:6
  108. product_name: k1-x_MUSE-Book
  109. match dtb by product_name: spacemit/6.1.15/k1-x_MUSE-Book.dtb
  110. select spacemit/6.1.15/k1-x_MUSE-Book.dtb to load
  111. Loading kernel...
  112. 13146092 bytes read in 24 ms (522.4 MiB/s)
  113. Loading dtb...
  114. 70117 bytes read in 1 ms (66.9 MiB/s)
  115. Loading ramdisk ...
  116. 6748169 bytes read in 12 ms (536.3 MiB/s)
  117. ## Loading kernel from FIT Image at 11000000 ...
  118. Using 'conf-default' configuration
  119. Verifying Hash Integrity ... OK
  120. Trying 'kernel' kernel subimage
  121. Description: Linux 6.1.15
  122. Type: Kernel Image
  123. Compression: gzip compressed
  124. Data Start: 0x110000bc
  125. Data Size: 13144503 Bytes = 12.5 MiB
  126. Architecture: RISC-V
  127. OS: Linux
  128. Load Address: 0x00200000
  129. Entry Point: 0x00200000
  130. Hash algo: crc32
  131. Hash value: 3d2b1d3a
  132. Verifying Hash Integrity ... crc32+ OK
  133. ## Flattened Device Tree blob at 31000000
  134. Booting using the fdt blob at 0x31000000
  135. Uncompressing Kernel Image
  136. Loading Ramdisk to 7d849000, end 7deb8809 ... OK
  137. Loading Device Tree to 000000007d834000, end 000000007d8481e4 ... OK
  138.  
  139. Starting kernel ...
  140.  
  141. efi_free_pool: illegal free 0x000000007ddb7040
  142. efi_free_pool: illegal free 0x000000007ddb4040
  143. efi_free_pool: illegal free 0x000000007ddb2040
  144. efi_free_pool: illegal free 0x000000007ddb0040
  145. efi_free_pool: illegal free 0x000000007ddae040
  146. efi_free_pool: illegal free 0x000000007ddac040
  147. efi_free_pool: illegal free 0x000000007ddaa040
  148. [ 0.000000] Linux version 6.1.15 (66fee0fd6) (root@build-deb-w7hvb-w59n1) (gcc (Ubuntu 13.2.0-4ubuntu3-bb2) 13.2.0, GNU ld (GNU Binutils for Ubuntu) 2.41) #1.0.12 SMP PREEMPT Fri Aug 2 08:53:21 UTC 2024
  149. [ 0.000000] OF: fdt: Ignoring memory range 0x0 - 0x200000
  150. [ 0.000000] Machine model: M1-MUSE-BOOK
  151. [ 0.000000] earlycon: sbi0 at I/O port 0x0 (options '')
  152. [ 0.000000] printk: bootconsole [sbi0] enabled
  153. [ 0.000000] efi: UEFI not found.
  154. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000065800000, size 384 MiB
  155. [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  156. [ 0.000000] Reserved memory: created DMA memory pool at 0x000000002ff40000, size 0 MiB
  157. [ 0.000000] OF: reserved mem: initialized node dpu_reserved@2ff40000, compatible id shared-dma-pool
  158. [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000030206000, size 0 MiB
  159. [ 0.000000] OF: reserved mem: initialized node vdev0buffer@30206000, compatible id shared-dma-pool
  160. [ 0.000000] Zone ranges:
  161. [ 0.000000] DMA32 [mem 0x0000000000200000-0x000000007fffffff]
  162. [ 0.000000] Normal [mem 0x0000000080000000-0x000000047fffffff]
  163. [ 0.000000] Movable zone start for each node
  164. [ 0.000000] Early memory node ranges
  165. [ 0.000000] node 0: [mem 0x0000000000200000-0x000000002ff3ffff]
  166. [ 0.000000] node 0: [mem 0x000000002ff40000-0x000000003033ffff]
  167. [ 0.000000] node 0: [mem 0x0000000030340000-0x000000007fffffff]
  168. [ 0.000000] node 0: [mem 0x0000000100000000-0x000000047fffffff]
  169. [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000047fffffff]
  170. [ 0.000000] On node 0, zone Normal: 524288 pages in unavailable ranges
  171. [ 0.000000] SBI specification v1.0 detected
  172. [ 0.000000] SBI implementation ID=0x1 Version=0x10003
  173. [ 0.000000] SBI IPI extension detected
  174. [ 0.000000] SBI RFENCE extension detected
  175. [ 0.000000] SBI HSM extension detected
  176. [ 0.000000] riscv: base ISA extensions acdfimv
  177. [ 0.000000] riscv: ELF capabilities acdfimv
  178. [ 0.000000] percpu: Embedded 27 pages/cpu s72744 r8192 d29656 u110592
  179. [ 0.000000] pcpu-alloc: s72744 r8192 d29656 u110592 alloc=27*4096
  180. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
  181. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4120072
  182. [ 0.000000] Kernel command line: earlycon=sbi earlyprintk console=tty1 console=ttyS0,115200 loglevel=8 clk_ignore_unused swiotlb=65536 rdinit=/init workqueue.default_affinity_scope=system mtdparts=spi-nor:64K@0(bootinfo),64K@64K(private),2564
  183. [ 0.000000] Unknown kernel command line parameters "mtdparts=spi-nor:64K@0(bootinfo),64K@64K(private),256K@128K(fsbl),64K@384K(env),192K@448K(opensbi),-@640K(uboot)", will be passed to user space.
  184. [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
  185. [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
  186. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  187. [ 0.000000] software IO TLB: area num 8.
  188. [ 0.000000] software IO TLB: mapped [mem 0x000000005d800000-0x0000000065800000] (128MB)
  189. [ 0.000000] Memory: 15862476K/16775168K available (16248K kernel code, 6740K rwdata, 8192K rodata, 2275K init, 562K bss, 519476K reserved, 393216K cma-reserved)
  190. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  191. [ 0.000000]
  192. [ 0.000000] **********************************************************
  193. [ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
  194. [ 0.000000] ** **
  195. [ 0.000000] ** trace_printk() being used. Allocating extra memory. **
  196. [ 0.000000] ** **
  197. [ 0.000000] ** This means that this is a DEBUG kernel and it is **
  198. [ 0.000000] ** unsafe for production use. **
  199. [ 0.000000] ** **
  200. [ 0.000000] ** If you see this message and you are not debugging **
  201. [ 0.000000] ** the kernel, report this immediately to your vendor! **
  202. [ 0.000000] ** **
  203. [ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
  204. [ 0.000000] **********************************************************
  205. [ 0.000000] trace event string verifier disabled
  206. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  207. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  208. [ 0.000000] Tracing variant of Tasks RCU enabled.
  209. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  210. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  211. [ 0.000000] riscv-intc: 64 local interrupts mapped
  212. [ 0.000000] plic: interrupt-controller@e0000000: mapped 159 interrupts with 8 handlers for 16 contexts.
  213. [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  214. [ 0.000000] riscv-timer: Timer interrupt in S-mode is available via sstc extension
  215. [ 0.000000] riscv-timer: riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [0]
  216. [ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  217. [ 0.000000] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  218. [ 0.008482] Console: colour dummy device 80x25
  219. [ 0.013028] printk: console [tty1] enabled
  220. [ 0.016802] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  221. [ 0.027096] pid_max: default: 32768 minimum: 301
  222. [ 0.032008] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
  223. [ 0.039475] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
  224. [ 0.049345] cblist_init_generic: Setting adjustable number of callback queues.
  225. [ 0.054850] cblist_init_generic: Setting shift to 3 and lim to 1.
  226. [ 0.061027] cblist_init_generic: Setting shift to 3 and lim to 1.
  227. [ 0.067188] riscv: ELF compat mode unsupported
  228. [ 0.067203] ASID allocator using 16 bits (65536 entries)
  229. [ 0.077089] rcu: Hierarchical SRCU implementation.
  230. [ 0.081874] rcu: Max phase no-delay instances is 1000.
  231. [ 0.087862] EFI services will not be available.
  232. [ 0.092328] smp: Bringing up secondary CPUs ...
  233. [ 0.103984] smp: Brought up 1 node, 8 CPUs
  234. [ 0.110314] devtmpfs: initialized
  235. [ 0.121472] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  236. [ 0.128454] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
  237. [ 0.140439] pinctrl core: initialized pinctrl subsystem
  238. [ 0.144020] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  239. [ 0.149767] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
  240. [ 0.156372] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  241. [ 0.164436] display class register
  242. [ 0.167698] thermal_sys: Registered thermal governor 'step_wise'
  243. [ 0.167743] cpuidle: using governor menu
  244. [ 0.177889] suspend: SBI SUSP extension detected
  245. [ 0.190673] pinctrl-single d401e000.pinctrl: 256 pins, size 1024
  246. [ 0.203231] platform d421a800.dsi2: Fixing up cyclic dependency with soc:port@c0340000
  247. [ 0.208505] platform d421a800.dphy2: Fixing up cyclic dependency with d421a800.dsi2
  248. [ 0.216190] platform soc:wb0: Fixing up cyclic dependency with soc:port@c0340000
  249. [ 0.223964] platform c0400500.hdmi: Fixing up cyclic dependency with soc:port@c0440000
  250. [ 0.244585] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
  251. [ 0.248561] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
  252. [ 0.254882] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
  253. [ 0.261735] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
  254. [ 0.335737] raid6: int64x8 gen() 1089 MB/s
  255. [ 0.403836] raid6: int64x4 gen() 1586 MB/s
  256. [ 0.471940] raid6: int64x2 gen() 1677 MB/s
  257. [ 0.540050] raid6: int64x1 gen() 1398 MB/s
  258. [ 0.541467] raid6: using algorithm int64x2 gen() 1677 MB/s
  259. [ 0.612146] raid6: .... xor() 813 MB/s, rmw enabled
  260. [ 0.614160] raid6: using intx1 recovery algorithm
  261. [ 0.621459] mmp-pdma d4000000.pdma: PM domain power-domain@SPT_PD_BUS will not be powered off
  262. [ 0.624163] SCSI subsystem initialized
  263. [ 0.631587] libata version 3.00 loaded.
  264. [ 0.635411] usbcore: registered new interface driver usbfs
  265. [ 0.640852] usbcore: registered new interface driver hub
  266. [ 0.646229] usbcore: registered new device driver usb
  267. [ 0.654615] i2c 6-0029: Fixing up cyclic dependency with d421a800.dsi2
  268. [ 0.660252] spacemit-pmic 8-0041: mask_invert=true is deprecated; please switch to unmask_base
  269. [ 0.673879] spacemit-regulator spacemit-regulator@spm8821: DMA mask not set
  270. [ 0.725553] mc: Linux media interface: v0.10
  271. [ 0.727027] videodev: Linux video capture interface: v2.00
  272. [ 0.732581] pps_core: LinuxPPS API ver. 1 registered
  273. [ 0.737569] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  274. [ 0.746783] PTP clock support registered
  275. [ 0.751420] Advanced Linux Sound Architecture Driver Initialized.
  276. [ 0.757314] Bluetooth: Core ver 2.22
  277. [ 0.760590] NET: Registered PF_BLUETOOTH protocol family
  278. [ 0.765958] Bluetooth: HCI device and connection manager initialized
  279. [ 0.772383] Bluetooth: HCI socket layer initialized
  280. [ 0.777326] Bluetooth: L2CAP socket layer initialized
  281. [ 0.782457] Bluetooth: SCO socket layer initialized
  282. [ 0.787678] vgaarb: loaded
  283. [ 0.790666] clocksource: Switched to clocksource riscv_clocksource
  284. [ 0.796815] VFS: Disk quotas dquot_6.6.0
  285. [ 0.800468] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  286. [ 0.813631] NET: Registered PF_INET protocol family
  287. [ 0.816160] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  288. [ 0.837649] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
  289. [ 0.843600] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  290. [ 0.851313] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
  291. [ 0.860008] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
  292. [ 0.868829] TCP: Hash tables configured (established 131072 bind 65536)
  293. [ 0.873741] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
  294. [ 0.880546] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
  295. [ 0.888017] NET: Registered PF_UNIX/PF_LOCAL protocol family
  296. [ 0.893916] RPC: Registered named UNIX socket transport module.
  297. [ 0.899428] RPC: Registered udp transport module.
  298. [ 0.904191] RPC: Registered tcp transport module.
  299. [ 0.908982] RPC: Registered tcp NFSv4.1 backchannel transport module.
  300. [ 0.916038] PCI: CLS 0 bytes, default 64
  301. [ 0.919858] Unpacking initramfs...
  302. [ 0.931804] Initialise system trusted keyrings
  303. [ 0.933672] workingset: timestamp_bits=46 max_order=22 bucket_order=0
  304. [ 0.945881] NFS: Registering the id_resolver key type
  305. [ 0.948169] Key type id_resolver registered
  306. [ 0.952370] Key type id_legacy registered
  307. [ 0.956579] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  308. [ 0.963242] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  309. [ 0.972760] Key type cifs.idmap registered
  310. [ 0.974885] ntfs: driver 2.1.32 [Flags: R/W].
  311. [ 0.979459] ntfs3: Max link count 4000
  312. [ 0.983099] ntfs3: Enabled Linux POSIX ACLs support
  313. [ 0.988044] ntfs3: Read-only LZX/Xpress compression included
  314. [ 0.994172] fuse: init (API version 7.37)
  315. [ 0.998294] SGI XFS with ACLs, security attributes, quota, no debug enabled
  316. [ 1.043691] NET: Registered PF_ALG protocol family
  317. [ 1.045671] xor: measuring software checksum speed
  318. [ 1.052596] 8regs : 4776 MB/sec
  319. [ 1.057090] 32regs : 4568 MB/sec
  320. [ 1.061220] rvv : 5301 MB/sec
  321. [ 1.063789] xor: using function: rvv (5301 MB/sec)
  322. [ 1.068660] async_tx: api initialized (async)
  323. [ 1.073087] Key type asymmetric registered
  324. [ 1.077330] Asymmetric key parser 'x509' registered
  325. [ 1.082593] io scheduler mq-deadline registered
  326. [ 1.086809] io scheduler kyber registered
  327. [ 1.093119] spacemit-pmic-pinctrl spacemit-pinctrl@spm8821: DMA mask not set
  328. [ 1.101755] k1x-dwc-pcie ca400000.pcie: has no power on gpio.
  329. [ 1.106995] k1x-dwc-pcie ca400000.pcie: host bridge /soc/pcie@ca400000 ranges:
  330. [ 1.108960] Freeing initrd memory: 6588K
  331. [ 1.111978] k1x-dwc-pcie ca400000.pcie: IO 0x009f002000..0x009f101fff -> 0x009f002000
  332. [ 1.124398] k1x-dwc-pcie ca400000.pcie: MEM 0x0090000000..0x009effffff -> 0x0090000000
  333. [ 1.232892] k1x-dwc-pcie ca400000.pcie: iATU unroll: enabled
  334. [ 1.235704] k1x-dwc-pcie ca400000.pcie: iATU regions: 8 ob, 8 ib, align 4K, limit 4G
  335. [ 1.334665] k1x-dwc-pcie ca400000.pcie: PCIe Gen.1 x1 link up
  336. [ 1.337668] k1x-dwc-pcie ca400000.pcie: PCI host bridge to bus 0001:00
  337. [ 1.344165] pci_bus 0001:00: root bus resource [bus 00-ff]
  338. [ 1.349714] pci_bus 0001:00: root bus resource [io 0x0000-0xfffff] (bus address [0x9f002000-0x9f101fff])
  339. [ 1.359357] pci_bus 0001:00: root bus resource [mem 0x90000000-0x9effffff]
  340. [ 1.366319] pci 0001:00:00.0: [1e5d:3003] type 01 class 0x060400
  341. [ 1.372382] pci 0001:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
  342. [ 1.378711] pci 0001:00:00.0: reg 0x14: [mem 0x00000000-0x000fffff]
  343. [ 1.385098] pci 0001:00:00.0: supports D1
  344. [ 1.389121] pci 0001:00:00.0: PME# supported from D0 D1 D3hot D3cold
  345. [ 1.398560] pci 0001:01:00.0: [10ec:b852] type 00 class 0x028000
  346. [ 1.401795] pci 0001:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid
  347. [ 1.408839] pci 0001:01:00.0: reg 0x10: [io size 0x0100]
  348. [ 1.414376] pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x000fffff 64bit]
  349. [ 1.421549] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
  350. [ 1.438713] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
  351. [ 1.442491] pci 0001:00:00.0: BAR 0: assigned [mem 0x90000000-0x900fffff]
  352. [ 1.449340] pci 0001:00:00.0: BAR 1: assigned [mem 0x90100000-0x901fffff]
  353. [ 1.456193] pci 0001:00:00.0: BAR 8: assigned [mem 0x90200000-0x902fffff]
  354. [ 1.463055] pci 0001:00:00.0: BAR 7: assigned [io 0x1000-0x1fff]
  355. [ 1.469212] pci 0001:01:00.0: BAR 2: assigned [mem 0x90200000-0x902fffff 64bit]
  356. [ 1.476628] pci 0001:01:00.0: BAR 0: assigned [io 0x1000-0x10ff]
  357. [ 1.482764] pci 0001:00:00.0: PCI bridge to [bus 01]
  358. [ 1.487786] pci 0001:00:00.0: bridge window [io 0x1000-0x1fff]
  359. [ 1.493950] pci 0001:00:00.0: bridge window [mem 0x90200000-0x902fffff]
  360. [ 1.502287] pcieport 0001:00:00.0: PME: Signaling with IRQ 58
  361. [ 1.507004] pcieport 0001:00:00.0: AER: enabled with IRQ 58
  362. [ 1.512820] k1x-dwc-pcie ca800000.pcie: has no power on gpio.
  363. [ 1.520351] k1x-dwc-pcie ca800000.pcie: host bridge /soc/pcie@ca800000 ranges:
  364. [ 1.525398] k1x-dwc-pcie ca800000.pcie: IO 0x00b7002000..0x00b7101fff -> 0x00b7002000
  365. [ 1.533808] k1x-dwc-pcie ca800000.pcie: MEM 0x00a0000000..0x00b6ffffff -> 0x00a0000000
  366. [ 1.642272] unexpected IRQ,INT0
  367. [ 1.642303] k1x-dwc-pcie ca800000.pcie: iATU unroll: enabled
  368. [ 1.648296] k1x-dwc-pcie ca800000.pcie: iATU regions: 8 ob, 8 ib, align 4K, limit 4G
  369. [ 1.746668] k1x-dwc-pcie ca800000.pcie: PCIe Gen.2 x2 link up
  370. [ 1.749668] k1x-dwc-pcie ca800000.pcie: PCI host bridge to bus 0002:00
  371. [ 1.756172] pci_bus 0002:00: root bus resource [bus 00-ff]
  372. [ 1.761719] pci_bus 0002:00: root bus resource [io 0x100000-0x1fffff] (bus address [0xb7002000-0xb7101fff])
  373. [ 1.771619] pci_bus 0002:00: root bus resource [mem 0xa0000000-0xb6ffffff]
  374. [ 1.778586] pci 0002:00:00.0: [1e5d:3003] type 01 class 0x060400
  375. [ 1.784646] pci 0002:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
  376. [ 1.790976] pci 0002:00:00.0: reg 0x14: [mem 0x00000000-0x000fffff]
  377. [ 1.797355] pci 0002:00:00.0: supports D1
  378. [ 1.801387] pci 0002:00:00.0: PME# supported from D0 D1 D3hot D3cold
  379. [ 1.810804] pci 0002:01:00.0: [1d97:5216] type 00 class 0x010802
  380. [ 1.814020] pci 0002:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
  381. [ 1.820916] pci 0002:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
  382. [ 1.827934] pci 0002:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x2 link at 0002:00:00.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
  383. [ 1.854696] pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to 01
  384. [ 1.858480] pci 0002:00:00.0: BAR 0: assigned [mem 0xa0000000-0xa00fffff]
  385. [ 1.865329] pci 0002:00:00.0: BAR 1: assigned [mem 0xa0100000-0xa01fffff]
  386. [ 1.872182] pci 0002:00:00.0: BAR 8: assigned [mem 0xa0200000-0xa02fffff]
  387. [ 1.879046] pci 0002:01:00.0: BAR 6: assigned [mem 0xa0200000-0xa021ffff pref]
  388. [ 1.886330] pci 0002:01:00.0: BAR 0: assigned [mem 0xa0220000-0xa0223fff 64bit]
  389. [ 1.893734] pci 0002:00:00.0: PCI bridge to [bus 01]
  390. [ 1.898772] pci 0002:00:00.0: bridge window [mem 0xa0200000-0xa02fffff]
  391. [ 1.907165] pcieport 0002:00:00.0: PME: Signaling with IRQ 62
  392. [ 1.911703] pcieport 0002:00:00.0: AER: enabled with IRQ 62
  393. [ 1.918312] input: spacemit_lid as /devices/platform/spacemit_lid/input/input0
  394. [ 1.936621] spacemit-wlan rf-pwrseq:wlan-pwrseq: error -ENXIO: IRQ index 0 not found
  395. [ 1.941579] spacemit-wlan rf-pwrseq:wlan-pwrseq: get hostwake irq failed, ignore wow
  396. [ 1.987882] d4017000.serial: ttyS0 at MMIO 0xd4017000 (irq = 65, base_baud = 921250) is a UART1
  397. [ 1.993889] printk: console [ttyS0] enabled
  398. [ 1.993889] printk: console [ttyS0] enabled
  399. [ 2.002224] printk: bootconsole [sbi0] disabled
  400. [ 2.002224] printk: bootconsole [sbi0] disabled
  401. [ 2.012126] d4017200.uart: ttyS2 at MMIO 0xd4017200 (irq = 66, base_baud = 3600000) is a UART3
  402. [ 2.083071] [drm] spacemit_dsi_probe()
  403. [ 2.087769] [drm] init_lt8911exb()
  404. [ 2.456915] [drm] /soc/dsi2@d421a800: find lcd_lt8911_edp_1920x1080 node
  405. [ 2.463817] [drm] spacemit_dsi_host_attach()
  406. [ 2.468413] [drm] init_lt9711()
  407. [ 2.472783] PVR_K:(Error): 1: TraceFS not found in PVRGpuTraceInitFTraceClockSource() [198]
  408. [ 2.491067] PVR_K: 1: Read BVNC 36.29.52.182 from HW device registers
  409. [ 2.497761] PVR_K: 1: RGX Device registered BVNC 36.29.52.182 with 1 core in the system
  410. [ 2.506722] [drm] Initialized pvr 23.2.6460340 20170530 for cac00000.imggpu on minor 0
  411. [ 2.522846] loop: module loaded
  412. [ 2.526426] at24 2-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write
  413. [ 2.535232] nvme nvme0: pci function 0002:01:00.0
  414. [ 2.540112] nvme 0002:01:00.0: enabling device (0000 -> 0002)
  415. [ 2.540878] Rounding down aligned max_sectors from 4294967295 to 4294967288
  416. [ 2.551305] nvme nvme0: Shutdown timeout set to 8 seconds
  417. [ 2.553203] db_root: cannot open: /etc/target
  418. [ 2.564021] k1x-qspi d420c000.spi: config mfp for cs:[0]
  419. [ 2.569588] k1x-qspi d420c000.spi: AHB buf size: 512
  420. [ 2.575191] k1x-qspi d420c000.spi: RX buffer overflow
  421. [ 2.581215] spi-nor spi4.0: FM25Q64AI3 (8192 Kbytes)
  422. [ 2.593740] nvme nvme0: allocated 64 MiB host memory buffer.
  423. [ 2.598233] spi4.0: error parsing ofpart partition /soc/spi@d420c000/flash@0/partition@0 (/soc/spi@d420c000/flash@0)
  424. [ 2.611790] k1x-qspi d420c000.spi: Runtime PM usage count underflow!
  425. [ 2.619227] CAN device driver interface
  426. [ 2.623427] usbcore: registered new interface driver cdc_ether
  427. [ 2.629369] usbcore: registered new interface driver cdc_subset
  428. [ 2.635397] usbcore: registered new interface driver zaurus
  429. [ 2.642150] spacemit-k1x-combphy c0b10000.phy: USB3 PHY init.
  430. [ 2.649379] mv-ehci mv-ehci: Spacemit EHCI
  431. [ 2.653587] mv-ehci mv-ehci: new USB bus registered, assigned bus number 1
  432. [ 2.660694] mv-ehci mv-ehci: irq 72, io mem 0xc0900100
  433. [ 2.678667] mv-ehci mv-ehci: USB 2.0 started, EHCI 1.00
  434. [ 2.684612] hub 1-0:1.0: USB hub found
  435. [ 2.688456] hub 1-0:1.0: 1 port detected
  436. [ 2.693240] mv-ehci mv-ehci: Spacemit EHCI
  437. [ 2.697429] mv-ehci mv-ehci: new USB bus registered, assigned bus number 2
  438. [ 2.704527] mv-ehci mv-ehci: irq 74, io mem 0xc0980100
  439. [ 2.722664] mv-ehci mv-ehci: USB 2.0 started, EHCI 1.00
  440. [ 2.727965] debugfs: Directory 'mv-ehci' with parent 'ehci' already present!
  441. [ 2.735656] hub 2-0:1.0: USB hub found
  442. [ 2.739500] hub 2-0:1.0: 1 port detected
  443. [ 2.744902] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  444. [ 2.750524] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 3
  445. [ 2.758638] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe6d hci version 0x110 quirks 0x0000000000010010
  446. [ 2.759519] nvme nvme0: 8/0/0 default/read/poll queues
  447. [ 2.768291] xhci-hcd xhci-hcd.0.auto: irq 71, io mem 0xc0a00000
  448. [ 2.778704] nvme0n1: p1 p2 p3 p4 p5 p6
  449. [ 2.779544] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  450. [ 2.788845] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 4
  451. [ 2.796634] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
  452. [ 2.803835] hub 3-0:1.0: USB hub found
  453. [ 2.807680] hub 3-0:1.0: 1 port detected
  454. [ 2.811982] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  455. [ 2.820640] hub 4-0:1.0: USB hub found
  456. [ 2.824467] hub 4-0:1.0: 1 port detected
  457. [ 2.829023] usbcore: registered new interface driver uas
  458. [ 2.834493] usbcore: registered new interface driver usb-storage
  459. [ 2.840856] spacemit-usb3-hub soc:usb3hub@0: v1.0.2
  460. [ 2.845880] spacemit-usb3-hub soc:usb3hub@0: onboard usb hub driver probed, hub configured
  461. [ 2.854633] f_tcm: UAS support multiple cmds
  462. [ 2.859312] Gt9xx driver installing..
  463. [ 2.863431] spacemit-pmic-pwrkey spacemit-pwrkey@spm8821: DMA mask not set
  464. [ 2.893268] input: spacemit pwrkey as /devices/platform/soc/d401d800.i2c/i2c-8/8-0041/spacemit-pwrkey@spm8821/input/input1
  465. [ 2.905286] spacemit-pmic-rtc spacemit-rtc@spm8821: DMA mask not set
  466. [ 2.931523] spacemit-pmic-rtc spacemit-rtc@spm8821: registered as rtc0
  467. [ 2.943372] spacemit-pmic-rtc spacemit-rtc@spm8821: setting system clock to 2024-09-03T14:29:57 UTC (1725373797)
  468. [ 2.954648] i2c_dev: i2c /dev entries driver
  469. [ 2.971943] MVX dev: Linlon v5276 identified. cores=2, nlsid=4, id=0, fuse=00000000, hw_id=00005276, hw_rev=00000050
  470. [ 2.991713] usbcore: registered new interface driver uvcvideo
  471. [ 2.998753] usb 2-1: new high-speed USB device number 2 using mv-ehci
  472. [ 3.003181] sbs-battery 5-000b: sbs-battery: battery gas gauge device registered
  473. [ 3.015535] device-mapper: uevent: version 1.0.3
  474. [ 3.020584] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: [email protected]
  475. [ 3.029704] device-mapper: multipath round-robin: version 1.2.0 loaded
  476. [ 3.036373] device-mapper: multipath queue-length: version 0.2.0 loaded
  477. [ 3.043094] device-mapper: multipath service-time: version 0.3.0 loaded
  478. [ 3.049876] device-mapper: multipath historical-service-time: version 0.1.1 loaded
  479. [ 3.057640] device-mapper: raid: Loading target version 1.15.1
  480. [ 3.063627] Bluetooth: HCI UART driver ver 2.3
  481. [ 3.068166] Bluetooth: HCI UART protocol H4 registered
  482. [ 3.073422] Bluetooth: HCI UART protocol Three-wire (H5) registered
  483. [ 3.080714] sbs-battery 5-000b: I2C adapter does not support I2C_FUNC_SMBUS_READ_BLOCK_DATA.
  484. [ 3.080714] Fallback method does not support PEC.
  485. [ 3.088508] sdhci: Secure Digital Host Controller Interface driver
  486. [ 3.095878] sbs-battery 5-000b: Unknown chemistry: 2620
  487. [ 3.100226] sdhci: Copyright(c) Pierre Ossman
  488. [ 3.109910] sdhci-pltfm: SDHCI platform and OF driver helper
  489. [ 3.116234] sdhci-spacemit d4280000.sdh: Got CD GPIO
  490. [ 3.154936] mmc0: SDHCI controller on d4280000.sdh [d4280000.sdh] using ADMA
  491. [ 3.161133] hub 2-1:1.0: USB hub found
  492. [ 3.166274] hub 2-1:1.0: 4 ports detected
  493. [ 3.186679] mmc1: SDHCI controller on d4280800.sdh [d4280800.sdh] using ADMA
  494. [ 3.193798] sdio: save sdio_host <- (____ptrval____)
  495. [ 3.390662] mmc2: SDHCI controller on d4281000.sdh [d4281000.sdh] using ADMA
  496. [ 3.399908] usbcore: registered new interface driver usbhid
  497. [ 3.405568] usbhid: USB HID core driver
  498. [ 3.409669] i2c_hid_of 4-002d: supply vdd not found, using dummy regulator
  499. [ 3.410760] remoteproc remoteproc0: rcpu_rproc is available
  500. [ 3.416758] i2c_hid_of 4-002d: supply vddl not found, using dummy regulator
  501. [ 3.422485] remoteproc remoteproc0: powering up rcpu_rproc
  502. [ 3.434852] remoteproc remoteproc0: Booting fw image esos.elf, size 99100
  503. [ 3.443192] rproc-virtio rproc-virtio.2.auto: assigned reserved memory node vdev0buffer@30206000
  504. [ 3.456089] virtio_rpmsg_bus virtio0: rpmsg host is online
  505. [ 3.456555] virtio_rpmsg_bus virtio0: creating channel rcpu-pwr-management-service addr 0x400
  506. [ 3.458680] usb 2-1.3: new high-speed USB device number 3 using mv-ehci
  507. [ 3.461645] rproc-virtio rproc-virtio.2.auto: registered virtio0 (type 7)
  508. [ 3.470320] virtio_rpmsg_bus virtio0: creating channel adma-service addr 0x401
  509. [ 3.476847] remoteproc remoteproc0: remote processor rcpu_rproc is now up
  510. [ 3.477223] k1x_rproc virtio0.rcpu-pwr-management-service.-1.1024: new channel: 0x400 -> 0x400!
  511. [ 3.483809] adma_spacemit virtio0.adma-service.-1.1025: new channel: 0x401 -> 0x401!
  512. [ 3.491338] riscv-pmu-sbi: SBI PMU extension is available
  513. [ 3.498448] virtio_rpmsg_bus virtio0: creating channel can-service addr 0x402
  514. [ 3.506679] riscv-pmu-sbi: 16 firmware and 18 hardware counters
  515. [ 3.514540] flexcan virtio0.can-service.-1.1026: new channel: 0x402 -> 0x402!
  516. [ 3.540693] Connection create success
  517. [ 3.542207] es8326 2-0019: Can not read property hp-detect-gpio
  518. [ 3.550428] es8326 2-0019: Can not read property mic-detect-gpio
  519. [ 3.556508] es8326 2-0019: assuming static mclk
  520. [ 3.564112] xt_time: kernel timezone is -0000
  521. [ 3.568576] IPVS: Registered protocols (TCP, UDP)
  522. [ 3.573369] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
  523. [ 3.580884] IPVS: ipvs loaded.
  524. [ 3.583973] IPVS: [rr] scheduler registered.
  525. [ 3.588419] Initializing XFRM netlink socket
  526. [ 3.593150] NET: Registered PF_INET6 protocol family
  527. [ 3.597853] usb 2-1.3: Found UVC 1.00 device USB2.0 FHD UVC WebCam (04f2:b65e)
  528. [ 3.599169] Segment Routing with IPv6
  529. [ 3.609173] In-situ OAM (IOAM) with IPv6
  530. [ 3.613263] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  531. [ 3.619752] NET: Registered PF_PACKET protocol family
  532. [ 3.624908] Bridge firewalling registered
  533. [ 3.628971] can: controller area network core
  534. [ 3.633489] NET: Registered PF_CAN protocol family
  535. [ 3.638333] can: raw protocol
  536. [ 3.641338] can: broadcast manager protocol
  537. [ 3.644603] input: USB2.0 FHD UVC WebCam: USB2.0 F as /devices/platform/soc/c0980100.ehci1/usb2/2-1/2-1.3/2-1.3:1.0/input/input2
  538. [ 3.645559] can: netlink gateway - max_hops=1
  539. [ 3.661863] Bluetooth: RFCOMM TTY layer initialized
  540. [ 3.666799] Bluetooth: RFCOMM socket layer initialized
  541. [ 3.672008] Bluetooth: RFCOMM ver 1.11
  542. [ 3.675788] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  543. [ 3.681191] Bluetooth: BNEP socket layer initialized
  544. [ 3.686182] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  545. [ 3.692149] Bluetooth: HIDP socket layer initialized
  546. [ 3.697193] 8021q: 802.1Q VLAN Support v1.8
  547. [ 3.701480] Key type dns_resolver registered
  548. [ 3.706752] Loading compiled-in X.509 certificates
  549. [ 3.712614] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
  550. [ 3.734707] usb 2-1.4: new low-speed USB device number 4 using mv-ehci
  551. [ 3.737062] suspend: SBI SUSP extension detected
  552. [ 3.742682] usb 3-1: new high-speed USB device number 2 using xhci-hcd
  553. [ 3.746811] spacemit-dpu-drv soc:port@c0340000: assigned reserved memory node dpu_reserved@2ff40000
  554. [ 3.762118] [drm] dpu plane init ok
  555. [ 3.765684] spacemit-drm-drv c0340000.display-subsystem-dsi: bound soc:port@c0340000 (ops dpu_component_ops)
  556. [ 3.775823] [drm] find possible crtcs: 0x00000001
  557. [ 3.780693] spacemit-drm-drv c0340000.display-subsystem-dsi: bound d421a800.dsi2 (ops dsi_component_ops)
  558. [ 3.790289] spacemit-drm-drv c0340000.display-subsystem-dsi: bound soc:wb0 (ops spacemit_wb_component_ops)
  559. [ 3.800595] [drm] Initialized spacemit 1.0.0 20231115 for c0340000.display-subsystem-dsi on minor 1
  560. [ 3.813039] [drm] spacemit_crtc_atomic_enable(power on)
  561. [ 3.815949] [drm] pxclk set_clk_val 142857000
  562. [ 3.816124] [drm] dpu_init
  563. [ 3.816172] [drm] spacemit_dsi_encoder_enable()
  564. [ 3.817188] [drm] lt8911exb_panel_enable()
  565. [ 3.817315] [drm] DPU type 1 id 2 Start!
  566. [ 3.835419] Console: switching to colour frame buffer device 240x67
  567. [ 3.859286] input: HS-KX312 -US-01-01- USB Keyboard as /devices/platform/soc/c0980100.ehci1/usb2/2-1/2-1.4/2-1.4:1.0/0003:1C4F:0043.0001/input/input3
  568. [ 3.910301] spacemit-drm-drv c0340000.display-subsystem-dsi: [drm] fb0: spacemitdrmfb frame buffer device
  569. [ 3.915638] hub 3-1:1.0: USB hub found
  570. [ 3.923013] hid-generic 0003:1C4F:0043.0001: input: USB HID v1.11 Keyboard [HS-KX312 -US-01-01- USB Keyboard] on usb-mv-ehci-1.4/input0
  571. [ 3.924080] hub 3-1:1.0: 5 ports detected
  572. [ 3.936375] spacemit-socinfo soc:socinfo@0: Spacemit: CPU[M1-8571] REV[C] DRO[124] Detected
  573. [ 3.950430] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  574. [ 3.952483] input: HS-KX312 -US-01-01- USB Keyboard Consumer Control as /devices/platform/soc/c0980100.ehci1/usb2/2-1/2-1.4/2-1.4:1.1/0003:1C4F:0043.0002/input/input4
  575. [ 3.987975] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  576. [ 3.997941] pwm-backlight soc:lcd_backlight: supply power not found, using dummy regulator
  577. [ 3.997997] clk: Not disabling unused clocks
  578. [ 4.008606] input: hid-over-i2c 0911:5288 Mouse as /devices/platform/soc/d4012800.i2c/i2c-4/4-002d/0018:0911:5288.0003/input/input6
  579. [ 4.014995] spacemit-dpu-drv soc:port@c0440000: assigned reserved memory node dpu_reserved@2ff40000
  580. [ 4.032390] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
  581. [ 4.034895] [drm] dpu plane init ok
  582. [ 4.035011] input: HS-KX312 -US-01-01- USB Keyboard System Control as /devices/platform/soc/c0980100.ehci1/usb2/2-1/2-1.4/2-1.4:1.1/0003:1C4F:0043.0002/input/input5
  583. [ 4.035146] hid-generic 0003:1C4F:0043.0002: input: USB HID v1.11 Device [HS-KX312 -US-01-01- USB Keyboard] on usb-mv-ehci-1.4/input1
  584. [ 4.035170] input: hid-over-i2c 0911:5288 Touchpad as /devices/platform/soc/d4012800.i2c/i2c-4/4-002d/0018:0911:5288.0003/input/input7
  585. [ 4.035284] hid-multitouch 0018:0911:5288.0003: input: I2C HID v1.00 Mouse [hid-over-i2c 0911:5288] on 4-002d
  586. [ 4.092319] spacemit-drm-drv c0440000.display-subsystem-hdmi: bound soc:port@c0440000 (ops dpu_component_ops)
  587. [ 4.102627] [drm] set hdmi mclk=491520000
  588. [ 4.107238] spacemit-drm-drv c0440000.display-subsystem-hdmi: bound c0400500.hdmi (ops spacemit_hdmi_ops)
  589. [ 4.117161] [drm] spacemit_hdmi_connector_detect() hdmi status disconnected
  590. [ 4.124629] [drm] Initialized spacemit 1.0.0 20231115 for c0440000.display-subsystem-hdmi on minor 2
  591. [ 4.133946] [drm] spacemit_hdmi_connector_detect() hdmi status disconnected
  592. [ 4.141062] spacemit-drm-drv c0440000.display-subsystem-hdmi: [drm] Cannot find any crtc or sizes
  593. [ 4.147655] hub 4-1:1.0: USB hub found
  594. [ 4.150710] enter spacemit_snd_sspa_pdev_probe
  595. [ 4.154173] hub 4-1:1.0: 4 ports detected
  596. [ 4.159412] ALSA device list:
  597. [ 4.165601] No soundcards found.
  598. [ 4.170467] Freeing unused kernel image (initmem) memory: 2272K
  599. [ 4.176617] Run /init as init process
  600. [ 4.180338] with arguments:
  601. [ 4.183371] /init
  602. [ 4.185675] with environment:
  603. [ 4.192666] HOME=/
  604. [ 4.198788] TERM=linux
  605. [ 4.205245] mtdparts=spi-nor:64K@0(bootinfo),64K@64K(private),256K@128K(fsbl),64K@384K(env),192K@448K(opensbi),-@640K(uboot)
  606. Loading, please wait...
  607. Starting systemd-udevd version 253.5-1ubuntu6bb2
  608. [ 4.674680] usb 3-1.5: new high-speed USB device number 3 using xhci-hcd
  609. [ 5.006770] input: snd-es8326 Headset Jack as /devices/platform/snd-card@1/sound/card1/input8
  610. Begin: Loading essential drivers ... done.
  611. Begin: Running /scripts/init-premount ... done.
  612. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  613. Begin: Running /scripts/local-premount ... done.
  614. Begin: Will now check root file system ... fsck from util-linux 2.39.1
  615. [/usr/sbin/fsck.ext4 (1) -- /dev/nvme0n1p6] fsck.ext4 -a -C0 /dev/nvme0n1p6
  616. rootfs: clean, 562073/15613952 files, 8748100/62448209 blocks
  617. done.
  618. resize2fs 1.47.0 (5-Feb-2023)
  619. The filesystem is already 62448209 (4k) blocks long. Nothing to do!
  620.  
  621. [ 5.229098] EXT4-fs (nvme0n1p6): mounted filesystem with ordered data mode. Quota mode: none.
  622. done.
  623. Begin: Running /scripts/local-bottom ... done.
  624. Begin: Running /scripts/init-bottom ... done.
  625. [ 5.432698] systemd[1]: systemd 253.5-1ubuntu6bb2 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 )
  626. [ 5.474504] systemd[1]: Detected architecture riscv64.
  627.  
  628. Welcome to Bianbu 1.0.7!
  629.  
  630. [ 5.499919] systemd[1]: Hostname set to <k1>.
  631. [ 5.905470] systemd[1]: Configuration file /lib/systemd/system/multimedia.service is marked executable. Please remove executable permission bits. Proceeding anyway.
  632. [ 5.938507] systemd[1]: Configuration file /lib/systemd/system/camera.service is marked executable. Please remove executable permission bits. Proceeding anyway.
  633. [ 5.963556] systemd[1]: Configuration file /lib/systemd/system/adbd.service is marked executable. Please remove executable permission bits. Proceeding anyway.
  634. [ 6.164970] systemd[1]: Queued start job for default target graphical.target.
  635. [ 6.203446] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
  636. [ OK ] Created slice system-modpr…lice - Slice /system/modprobe.
  637. [ 6.233055] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty.
  638. [ OK ] Created slice system-seria… - Slice /system/serial-getty.
  639. [ 6.265029] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
  640. [ OK ] Created slice system-syste… - Slice /system/systemd-fsck.
  641. [ 6.296131] systemd[1]: Created slice user.slice - User and Session Slice.
  642. [ OK ] Created slice user.slice - User and Session Slice.
  643. [ 6.323309] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
  644. [ OK ] Started systemd-ask-passwo… Requests to Wall Directory Watch.
  645. [ 6.355368] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc).
  646. [ 6.379939] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
  647. [ OK ] Reached target integrityse…Local Integrity Protected Volumes.
  648. [ 6.407065] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
  649. [ OK ] Reached target nss-user-lo…[0m - User and Group Name Lookups.
  650. [ 6.435037] systemd[1]: Reached target slices.target - Slice Units.
  651. [ OK ] Reached target slices.target - Slice Units.
  652. [ 6.458929] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
  653. [ OK ] Reached target snapd.mounts-pre.target - Mounting snaps.
  654. [ 6.486912] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
  655. [ OK ] Reached target snapd.mounts.target - Mounted snaps.
  656. [ 6.514945] systemd[1]: Reached target swap.target - Swaps.
  657. [ OK ] Reached target swap.target - Swaps.
  658. [ 6.539009] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
  659. [ OK ] Reached target veritysetup… - Local Verity Protected Volumes.
  660. [ 6.628696] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket.
  661. [ OK ] Listening on rpcbind.socke… RPCbind Server Activation Socket.
  662. [ 6.659767] systemd[1]: Listening on syslog.socket - Syslog Socket.
  663. [ OK ] Listening on syslog.socket - Syslog Socket.
  664. [ 6.683626] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
  665. [ OK ] Listening on systemd-fsckd…sck to fsckd communication Socket.
  666. [ 6.711294] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
  667. [ OK ] Listening on systemd-initc… initctl Compatibility Named Pipe.
  668. [ 6.739625] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
  669. [ OK ] Listening on systemd-journ…t - Journal Socket (/dev/log).
  670. [ 6.767759] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
  671. [ OK ] Listening on systemd-journald.socket - Journal Socket.
  672. [ 6.795086] systemd[1]: systemd-oomd.socket - Userspace Out-Of-Memory (OOM) Killer Socket was skipped because of an unmet condition check (ConditionPathExists=/proc/pressure/memory).
  673. [ 6.817025] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
  674. [ OK ] Listening on systemd-udevd….socket - udev Control Socket.
  675. [ 6.847509] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
  676. [ OK ] Listening on systemd-udevd…l.socket - udev Kernel Socket.
  677. [ 6.907086] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
  678. Mounting dev-hugepages.mount - Huge Pages File System...
  679. [ 6.939125] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
  680. Mounting dev-mqueue.mountPOSIX Message Queue File System...
  681. [ 6.995142] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
  682. Mounting sys-kernel-debug.… - Kernel Debug File System...
  683. [ 7.027146] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
  684. Mounting sys-kernel-tracin… - Kernel Trace File System...
  685. [ 7.079502] systemd[1]: Starting systemd-journald.service - Journal Service...
  686. Starting systemd-journald.service - Journal Service...
  687. [ 7.107525] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
  688. [ 7.135366] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
  689. Starting keyboard-setup.se…Set the c[ 7.151065] systemd-journald[332]: Collecting audit messages is disabled.
  690. onsole keyboard layout...
  691. [ 7.171846] systemd[1]: kmod-static-nodes.service - Create List of Static Device Nodes was skipped because of an unmet condition check (ConditionFileNotEmpty=/lib/modules/6.1.15/modules.devname).
  692. [ 7.200394] systemd[1]: Starting [email protected] - Load Kernel Module configfs...
  693. Starting modprobe@configfs…m - Load Kernel Module configfs...
  694. [ 7.233180] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
  695. Starting modprobe@dm_mod.s…[0m - Load Kernel Module dm_mod...
  696. [ 7.264735] systemd[1]: Starting [email protected] - Load Kernel Module drm...
  697. Starting [email protected] - Load Kernel Module drm...
  698. [ 7.296426] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
  699. Starting modprobe@efi_psto…- Load Kernel Module efi_pstore...
  700. [ 7.328309] systemd[1]: Starting [email protected] - Load Kernel Module fuse...
  701. Starting [email protected]…e - Load Kernel Module fuse...
  702. [ 7.360363] systemd[1]: Starting [email protected] - Load Kernel Module loop...
  703. Starting [email protected]…e - Load Kernel Module loop...
  704. [ 7.387804] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
  705. [ 7.415500] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
  706. Starting systemd-modules-l…rvice - Load Kernel Modules...
  707. [ 7.443059] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
  708. [ 7.474366] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
  709. Starting systemd-remount-f…nt Root and Kernel File Systems...
  710. [ 7.508703] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
  711. [ 7.517915] EXT4-fs (nvme0n1p6): re-mounted. Quota mode: none.
  712. Starting systemd-udev-trig…[0m - Coldplug All udev Devices...
  713. [ 7.555488] systemd[1]: Started systemd-journald.service - Journal Service.
  714. [ OK ] Started systemd-journald.service - Journal Service.
  715. [ OK ] Mounted dev-hugepages.mount - Huge Pages File System.
  716. [ OK ] Mounted dev-mqueue.mount- POSIX Message Queue File System.
  717. [ OK ] Mounted sys-kernel-debug.m…nt - Kernel Debug File System.
  718. [ OK ] Mounted sys-kernel-tracing…nt - Kernel Trace File System.
  719. [ OK ] Finished keyboard-setup.se…- Set the console keyboard layout.
  720. [ OK ] Finished modprobe@configfs…[0m - Load Kernel Module configfs.
  721. [ OK ] Finished modprobe@dm_mod.s…e - Load Kernel Module dm_mod.
  722. [ OK ] Finished [email protected] - Load Kernel Module drm.
  723. [ OK ] Finished modprobe@efi_psto…m - Load Kernel Module efi_pstore.
  724. [ OK ] Finished [email protected] - Load Kernel Module fuse.
  725. [ OK ] Finished [email protected] - Load Kernel Module loop.
  726. [ OK ] Finished systemd-modules-l…service - Load Kernel Modules.
  727. [ OK ] Finished systemd-remount-f…ount Root and Kernel File Systems.
  728. Mounting sys-fs-fuse-conne… - FUSE Control File System...
  729. Mounting sys-kernel-config…ernel Configuration File System...
  730. Starting systemd-journal-f…h Journal to Persistent Storage...
  731. [ 7.898964] systemd-journald[332]: Received client request to flush runtime journal.
  732. Starting systemd-random-se… - Load/Save OS Random Seed...
  733. [ 7.934948] systemd-journald[332]: /var/log/journal/a032fd2167304dcc9bfe6110a885591f/system.journal: Monotonic clock jumped backwards relative to last journal entry, rotating.
  734. [ 7.934981] systemd-journald[332]: Rotating system journal.
  735. Starting systemd-sysctl.se…ce - Apply Kernel Variables...
  736. Starting systemd-sysusers.…rvice - Create System Users...
  737. [ OK ] Mounted sys-fs-fuse-connec…nt - FUSE Control File System.
  738. [ OK ] Mounted sys-kernel-config.… Kernel Configuration File System.
  739. [ OK ] Finished systemd-sysctl.service - Apply Kernel Variables.
  740. [ OK ] Finished systemd-journal-f…ush Journal to Persistent Storage.
  741. [ OK ] Finished systemd-sysusers.service - Create System Users.
  742. Starting systemd-tmpfiles-…ate Static Device Nodes in /dev...
  743. [ OK ] Finished systemd-tmpfiles-…reate Static Device Nodes in /dev.
  744. [ OK ] Reached target local-fs-pr…reparation for Local File Systems.
  745. Starting systemd-udevd.ser…ger for Device Events and Files...
  746. [ OK ] Finished systemd-udev-trig…e - Coldplug All udev Devices.
  747. [ OK ] Started systemd-udevd.serv…nager for Device Events and Files.
  748. [ OK ] Started systemd-ask-passwo…quests to Console Directory Watch.
  749. [ OK ] Reached target cryptsetup.…get - Local Encrypted Volumes.
  750. [ OK ] Found device dev-ttyS0.device - /dev/ttyS0.
  751. [ OK ] Found device dev-disk-by\x… - FORESEE XP1000F256G bootfs.
  752. [ OK ] Created slice system-syste…- Slice /system/systemd-backlight.
  753. [ OK ] Listening on systemd-rfkil…l Switch Status /dev/rfkill Watch.
  754. Starting modprobe@dm_mod.s…[0m - Load Kernel Module dm_mod...
  755. Starting modprobe@efi_psto…- Load Kernel Module efi_pstore...
  756. Starting [email protected]…e - Load Kernel Module loop...
  757. Starting systemd-backlight… of backlight:soc:lcd_backlight...
  758. Starting systemd-fsck@dev-…b29-aff8-4795-b792-1ab73ee2d385...
  759. [ OK ] Finished systemd-random-se…ce - Load/Save OS Random Seed.
  760. [ OK ] Finished modprobe@dm_mod.s…e - Load Kernel Module dm_mod.
  761. [ OK ] Finished modprobe@efi_psto…m - Load Kernel Module efi_pstore.
  762. [ OK ] Finished [email protected] - Load Kernel Module loop.
  763. [ OK ] Finished systemd-backlight…ss of backlight:soc:lcd_backlight.
  764. [ OK ] Started systemd-fsckd.serv…tem Check Daemon to report status.
  765. Starting systemd-rfkill.se…Load/Save RF Kill Switch Status...
  766. [ OK ] Finished systemd-fsck@dev-…4db29-aff8-4795-b792-1ab73ee2d385.
  767. [ OK ] Started systemd-rfkill.ser…- Load/Save RF Kill Switch Status.
  768. Mounting boot.mount - /boot...
  769. [ OK ] Mounted boot.mount - /boot.
  770. [ OK ] Reached target local-fs.target - Local File Systems.
  771. Starting console-setup.ser…m - Set console font and keymap...
  772. Starting plymouth-read-wri…mouth To Write Out Runtime Data...
  773. Starting systemd-tmpfiles-… Volatile Files and Directories...
  774. [ OK ] Finished console-setup.ser…[0m - Set console font and keymap.
  775. [ OK ] Finished plymouth-read-wri…lymouth To Write Out Runtime Data.
  776. [ OK ] Finished systemd-tmpfiles-…te Volatile Files and Directories.
  777. Mounting run-rpc_pipefs.mount - RPC Pipe File System...
  778. Starting rpcbind.service - RPC bind portmap service...
  779. Starting systemd-resolved.…e - Network Name Resolution...
  780. Starting systemd-timesyncd… - Network Time Synchronization...
  781. Starting systemd-update-ut…rd System Boot/Shutdown in UTMP...
  782. [ OK ] Started rpcbind.service - RPC bind portmap service.
  783. [ OK ] Mounted run-rpc_pipefs.mount - RPC Pipe File System.
  784. [ OK ] Reached target rpc_pipefs.target.
  785. [ OK ] Reached target rpcbind.target - RPC Port Mapper.
  786. [ OK ] Reached target nfs-client.target - NFS client services.
  787. [ OK ] Reached target remote-fs-p…eparation for Remote File Systems.
  788. [ OK ] Reached target remote-fs.target - Remote File Systems.
  789. [ OK ] Finished systemd-update-ut…cord System Boot/Shutdown in UTMP.
  790. [ OK ] Started systemd-timesyncd.…0m - Network Time Synchronization.
  791. [ OK ] Reached target time-set.target - System Time Set.
  792. [ OK ] Started systemd-resolved.s…ice - Network Name Resolution.
  793. [ OK ] Reached target nss-lookup.…m - Host and Network Name Lookups.
  794. [ OK ] Reached target sysinit.target - System Initialization.
  795. [ OK ] Started cups.path - CUPS Scheduler.
  796. [ OK ] Started whoopsie.path …ation of the /var/crash directory.
  797. [ OK ] Started anacron.timer - Trigger anacron every hour.
  798. [ OK ] Started apt-daily.timer - Daily apt download activities.
  799. [ OK ] Started apt-daily-upgrade.… apt upgrade and clean activities.
  800. [ OK ] Started dpkg-db-backup.tim… Daily dpkg database backup timer.
  801. [ OK ] Started e2scrub_all.timeretadata Check for All Filesystems.
  802. [ OK ] Started fstrim.timer -…sed filesystem blocks once a week.
  803. [ OK ] Started fwupd-refresh.time… Refresh fwupd metadata regularly.
  804. [ OK ] Started logrotate.timer - Daily rotation of log files.
  805. [ OK ] Started man-db.timer - Daily man-db regeneration.
  806. [ OK ] Started motd-news.timer - Message of the Day.
  807. [ OK ] Started systemd-tmpfiles-c… Cleanup of Temporary Directories.
  808. [ OK ] Reached target paths.target - Path Units.
  809. [ OK ] Listening on avahi-daemon.…NS/DNS-SD Stack Activation Socket.
  810. [ OK ] Listening on cups.socket - CUPS Scheduler.
  811. [ OK ] Listening on dbus.socket- D-Bus System Message Bus Socket.
  812. Starting snapd.socket …et activation for snappy daemon...
  813. [ OK ] Listening on ssh.socketpenBSD Secure Shell server socket.
  814. [ OK ] Listening on uuidd.socketm - UUID daemon activation socket.
  815. [ OK ] Listening on snapd.socketcket activation for snappy daemon.
  816. [ OK ] Reached target sockets.target - Socket Units.
  817. [ OK ] Reached target basic.target - Basic System.
  818. Starting accounts-daemon.service - Accounts Service...
  819. Starting adbd.service - Load modules user load...
  820. [ OK ] Started anacron.service - Run anacron jobs.
  821. Starting apport.servicetomatic crash report generation...
  822. Starting avahi-daemon.serv…e - Avahi mDNS/DNS-SD Stack...
  823. Starting camera.service - camera service...
  824. [ OK ] Started cron.service -…kground program processing daemon.
  825. Starting dbus.service - D-Bus System Message Bus...
  826. [ OK ] Started dmesg.service …nitial kernel messages after boot.
  827. Starting e2scrub_reap.serv…e ext4 Metadata Check Snapshots...
  828. Starting ec_led_control.se…ce - EC Led Control Service...
  829. [ OK ] Started irqbalance.service - irqbalance daemon.
  830. Starting multimedia.service - multimedia service...
  831. Starting polkit.service - Authorization Manager...
  832. Starting power-profiles-da…ice - Power Profiles daemon...
  833. Starting rsyslog.service - System Logging Service...
  834. Starting schroot.service - Recover schroot sessions...
  835. [ OK ] Reached target getty-pre.target - Preparation for Logins.
  836. Starting snapd.service - Snap Daemon...
  837. [ OK ] Started spacemit-modules-u…vice - Load modules user load.
  838. Starting switcheroo-contro…witcheroo Control Proxy service...
  839. Starting systemd-logind.se…ice - User Login Management...
  840. Starting udisks2.service - Disk Manager...
  841. [ OK ] Started dbus.service - D-Bus System Message Bus.
  842. [ OK ] Finished e2scrub_reap.serv…ine ext4 Metadata Check Snapshots.
  843. [ OK ] Started ec_led_control.service - EC Led Control Service.
  844. [ OK ] Finished multimedia.service - multimedia service.
  845. [ OK ] Finished camera.service - camera service.
  846. [ OK ] Started switcheroo-control… Switcheroo Control Proxy service.
  847. [ OK ] Started rsyslog.service - System Logging Service.
  848. [ OK ] Started avahi-daemon.service - Avahi mDNS/DNS-SD Stack.
  849. Starting NetworkManager.service - Network Manager...
  850. Starting alsa-restore.serv…- Save/Restore Sound Card State...
  851. [ 13.698475] Filesystem uses "xz" compression. This is not supported
  852. Starting k1.ec.comm.service - Server EC Manager...
  853. [ OK ] Started realtek-bt.service…ltek Uart Bluetooth power service.
  854. Starting upower.service - Daemon for power management...
  855. Starting wpa_supplicant.service - WPA supplicant...
  856. [ OK ] Started systemd-logind.service - User Login Management.
  857. [ OK ] Finished schroot.service - Recover schroot sessions.
  858. [FAILED] Failed to start adbd.service - Load modules user load.
  859. See 'systemctl status adbd.service' for details.
  860. [ OK ] Finished alsa-restore.serv…m - Save/Restore Sound Card State.
  861. [ OK ] Started k1.ec.comm.service - Server EC Manager.
  862. [ OK ] Started wpa_supplicant.service - WPA supplicant.
  863. [ OK ] Started snapd.service - Snap Daemon.
  864. [ OK ] Reached target sound.target - Sound Card.
  865. Starting snapd.seeded.serv…ait until snapd is fully seeded...
  866. Starting systemd-hostnamed.service - Hostname Service...
  867. Starting systemd-timedated…rvice - Time & Date Service...
  868. [ OK ] Started polkit.service - Authorization Manager.
  869. [ OK ] Started accounts-daemon.service - Accounts Service.
  870. [ OK ] Started power-profiles-dae…rvice - Power Profiles daemon.
  871. Starting ModemManager.service - Modem Manager...
  872. [ OK ] Started udisks2.service - Disk Manager.
  873. [ OK ] Started systemd-timedated.service - Time & Date Service.
  874. [ OK ] Finished snapd.seeded.serv… Wait until snapd is fully seeded.
  875. [ OK ] Started ModemManager.service - Modem Manager.
  876. [ OK ] Started systemd-hostnamed.service - Hostname Service.
  877. [ OK ] Started upower.service - Daemon for power management.
  878. Starting NetworkManager-di…nager Script Dispatcher Service...
  879. [ OK ] Started NetworkManager-dis…Manager Script Dispatcher Service.
  880. [ OK ] Finished apport.serviceautomatic crash report generation.
  881.  
  882. Bianbu 1.0.7 k1 ttyS0k1 login: am11
  883. Password:
  884. Welcome to Bianbu 1.0.7 (GNU/Linux 6.1.15 riscv64)
  885.  
  886. * Documentation: https://bianbu.spacemit.com
  887. * Support: https://ticket.spacemit.com
  888.  
  889. 887 updates can be applied immediately.
  890. To see these additional updates run: apt list --upgradable
  891.  
  892. Last login: la
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!