API tools faq
paste
Latrina

Untitled

Latrina
Nov 26th, 2021
36
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 24.60 KB | None | 0 0
raw download clone embed print report
  1. Type [C-a] [C-h] to see available commands
  2. Terminal ready
  3. �
  4. PM_RSTS: 0x00001000
  5. RPi: BOOTLOADER release VERSION:c258ef8f DATE: Jul 6 2021 TIME: 11:44:56 BOOTMODE: 0x00000006 part: 0 BUILD_TIMESTAMP=1625568293 0xe6954aa6 0x00d03114 0x000d7543
  6. PM_RSTS: 0x00001000
  7. part 00000000 reset_info 00000000
  8. uSD voltage 3.3V
  9. Initialising SDRAM 'Micron' 32Gb x2 total-size: 64 Gbit 3200
  10. XHCI-STOP
  11. xHC ver: 256 HCS: 05000420 fc000031 00e70004 HCC: 002841eb
  12. USBSTS 11
  13. xHC ver: 256 HCS: 05000420 fc000031 00e70004 HCC: 002841eb
  14. xHC ports 5 slots 32 intrs 4
  15. Boot mode: SD (01) order 2
  16. SD HOST: 250000000 CTL0: 0x00000000 BUS: 100000 Hz actual: 100000 HZ div: 2500 (1250) status: 0x1fff0000 delay: 1080
  17. SD HOST: 250000000 CTL0: 0x00000f00 BUS: 100000 Hz actual: 100000 HZ div: 2500 (1250) status: 0x1fff0000 delay: 1080
  18. OCR c0ff8000 [16]
  19. CID: 0003534453433136478028d90c100125
  20. CSD: 400e00325b59000076b27f800a404000
  21. SD: bus-width: 4 spec: 2 SCR: 0x02358043 0x00000000
  22. SD HOST: 250000000 CTL0: 0x00000f04 BUS: 50000000 Hz actual: 41666666 HZ div: 6 (3) status: 0x1fff0000 delay: 2
  23. MBR: 0x00000800, 1024000 type: 0x0c
  24. MBR: 0x000fa800, 2097152 type: 0x82
  25. MBR: 0x002fa800,27993088 type: 0x83
  26. MBR: 0x00000000, 0 type: 0x00
  27. Trying partition: 0
  28. lba: 2048 oem: 'mkfs.fat' volume: ' NO NAME '
  29. rsc 32 fat-sectors 1000 c-count 127746 c-size 8 r-dir 2 r-sec 0 r-entries 0
  30. FAT32 clusters 127746
  31. PM_RSTS: 0x00001000
  32. Trying partition: 0
  33. lba: 2048 oem: 'mkfs.fat' volume: ' NO NAME '
  34. rsc 32 fat-sectors 1000 c-count 127746 c-size 8 r-dir 2 r-sec 0 r-entries 0
  35. FAT32 clusters 127746
  36. Read config.txt bytes 295 hnd 0x00000000
  37. Read start4.elf bytes 2235712 hnd 0x00000000
  38. Read fixup4.dat bytes 5407 hnd 0x00000000
  39. Firmware: 40787ee5905644f639a2a0f6e00ae12e517a2211 Aug 3 2021 18:14:56
  40. 0x00d03114 0x00000000 0x00000fff
  41. MEM GPU: 76 ARM: 948 TOTAL: 1024
  42. Starting start4.elf @ 0xfec00200 partition 0
  43. +
  44. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
  45. [ 0.000000] Linux version 5.10.63-v8+ (dom@buildbot) (aarch64-linux-gnu-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1459 SMP PREEMPT Wed Oct 6 16:42:49 BST 2021
  46. [ 0.000000] random: fast init done
  47. [ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.4
  48. [ 0.000000] efi: UEFI not found.
  49. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000002ac00000, size 64 MiB
  50. [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  51. [ 0.000000] Zone ranges:
  52. [ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
  53. [ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000ffffffff]
  54. [ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff]
  55. [ 0.000000] Movable zone start for each node
  56. [ 0.000000] Early memory node ranges
  57. [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
  58. [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff]
  59. [ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff]
  60. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
  61. [ 0.000000] percpu: Embedded 32 pages/cpu s91416 r8192 d31464 u131072
  62. [ 0.000000] Detected PIPT I-cache on CPU0
  63. [ 0.000000] CPU features: detected: Spectre-v2
  64. [ 0.000000] CPU features: detected: Spectre-v4
  65. [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
  66. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2028848
  67. [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=DC:A6:32:D5:B2:DE vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 root=/dev/mmcblk0p3 rootfstype=ext4 rootwait fsck.repair=yes cgroup_memory=1 cgroup_enable=memory
  68. [ 0.000000] cgroup: Enabling memory control group subsystem
  69. [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
  70. [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  71. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  72. [ 0.000000] software IO TLB: mapped [mem 0x0000000037400000-0x000000003b400000] (64MB)
  73. [ 0.000000] Memory: 7931272K/8245248K available (11136K kernel code, 1946K rwdata, 3984K rodata, 3712K init, 1260K bss, 248440K reserved, 65536K cma-reserved)
  74. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  75. [ 0.000000] ftrace: allocating 36756 entries in 144 pages
  76. [ 0.000000] ftrace: allocated 144 pages with 2 groups
  77. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  78. [ 0.000000] rcu: RCU event tracing is enabled.
  79. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
  80. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  81. [ 0.000000] Rude variant of Tasks RCU enabled.
  82. [ 0.000000] Tracing variant of Tasks RCU enabled.
  83. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  84. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  85. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  86. [ 0.000000] GIC: Using split EOI/Deactivate mode
  87. [ 0.000000] random: get_random_bytes called from start_kernel+0x3b0/0x570 with crng_init=1
  88. [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
  89. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
  90. [ 0.000003] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
  91. [ 0.000119] Console: colour dummy device 80x25
  92. [ 0.000152] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
  93. [ 0.000165] pid_max: default: 32768 minimum: 301
  94. [ 0.000232] LSM: Security Framework initializing
  95. [ 0.000371] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
  96. [ 0.000432] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
  97. [ 0.001853] rcu: Hierarchical SRCU implementation.
  98. [ 0.002366] EFI services will not be available.
  99. [ 0.002598] smp: Bringing up secondary CPUs ...
  100. [ 0.003032] Detected PIPT I-cache on CPU1
  101. [ 0.003074] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
  102. [ 0.003541] Detected PIPT I-cache on CPU2
  103. [ 0.003560] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
  104. [ 0.004081] Detected PIPT I-cache on CPU3
  105. [ 0.004101] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
  106. [ 0.004163] smp: Brought up 1 node, 4 CPUs
  107. [ 0.004173] SMP: Total of 4 processors activated.
  108. [ 0.004181] CPU features: detected: 32-bit EL0 Support
  109. [ 0.004188] CPU features: detected: CRC32 instructions
  110. [ 0.004195] CPU features: detected: 32-bit EL1 Support
  111. [ 0.018102] CPU: All CPU(s) started at EL2
  112. [ 0.018134] alternatives: patching kernel code
  113. [ 0.019189] devtmpfs: initialized
  114. [ 0.023774] Enabled cp15_barrier support
  115. [ 0.023797] Enabled setend support
  116. [ 0.023900] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  117. [ 0.023916] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  118. [ 0.025252] pinctrl core: initialized pinctrl subsystem
  119. [ 0.025642] DMI not present or invalid.
  120. [ 0.025841] NET: Registered protocol family 16
  121. [ 0.027222] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
  122. [ 0.027335] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  123. [ 0.027711] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  124. [ 0.027759] audit: initializing netlink subsys (disabled)
  125. [ 0.027971] audit: type=2000 audit(0.024:1): state=initialized audit_enabled=0 res=1
  126. [ 0.028209] thermal_sys: Registered thermal governor 'step_wise'
  127. [ 0.028422] cpuidle: using governor menu
  128. [ 0.028585] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  129. [ 0.028659] ASID allocator initialised with 65536 entries
  130. [ 0.028720] Serial: AMBA PL011 UART driver
  131. [ 0.039824] bcm2835-mbox fe00b880.mailbox: mailbox enabled
  132. [ 0.048075] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-08-03T18:14:56, variant start
  133. [ 0.052078] raspberrypi-firmware soc:firmware: Firmware hash is 40787ee5905644f639a2a0f6e00ae12e517a2211
  134. [ 0.068254] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
  135. [ 0.069845] vgaarb: loaded
  136. [ 0.070044] SCSI subsystem initialized
  137. [ 0.070137] usbcore: registered new interface driver usbfs
  138. [ 0.070165] usbcore: registered new interface driver hub
  139. [ 0.070198] usbcore: registered new device driver usb
  140. [ 0.070323] usb_phy_generic phy: supply vcc not found, using dummy regulator
  141. [ 0.071136] clocksource: Switched to clocksource arch_sys_counter
  142. [ 0.481737] VFS: Disk quotas dquot_6.6.0
  143. [ 0.481788] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  144. [ 0.481860] FS-Cache: Loaded
  145. [ 0.481996] CacheFiles: Loaded
  146. [ 0.486276] NET: Registered protocol family 2
  147. [ 0.486811] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
  148. [ 0.489366] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
  149. [ 0.489414] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
  150. [ 0.489602] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
  151. [ 0.490507] TCP: Hash tables configured (established 65536 bind 65536)
  152. [ 0.490707] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
  153. [ 0.490766] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
  154. [ 0.490994] NET: Registered protocol family 1
  155. [ 0.491558] RPC: Registered named UNIX socket transport module.
  156. [ 0.491568] RPC: Registered udp transport module.
  157. [ 0.491574] RPC: Registered tcp transport module.
  158. [ 0.491580] RPC: Registered tcp NFSv4.1 backchannel transport module.
  159. [ 0.491592] PCI: CLS 0 bytes, default 64
  160. [ 0.492687] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
  161. [ 0.492812] kvm [1]: IPA Size Limit: 44 bits
  162. [ 0.493301] kvm [1]: vgic interrupt IRQ9
  163. [ 0.493425] kvm [1]: Hyp mode initialized successfully
  164. [ 0.494330] Initialise system trusted keyrings
  165. [ 0.494499] workingset: timestamp_bits=46 max_order=21 bucket_order=0
  166. [ 0.497139] zbud: loaded
  167. [ 0.497873] FS-Cache: Netfs 'nfs' registered for caching
  168. [ 0.498186] NFS: Registering the id_resolver key type
  169. [ 0.498209] Key type id_resolver registered
  170. [ 0.498215] Key type id_legacy registered
  171. [ 0.498269] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  172. [ 0.498277] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  173. [ 0.498771] Key type asymmetric registered
  174. [ 0.498779] Asymmetric key parser 'x509' registered
  175. [ 0.498802] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  176. [ 0.498920] io scheduler mq-deadline registered
  177. [ 0.498928] io scheduler kyber registered
  178. [ 0.500606] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
  179. [ 0.500620] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
  180. [ 0.500649] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000
  181. [ 0.500681] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000
  182. [ 0.565197] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
  183. [ 0.565365] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
  184. [ 0.565375] pci_bus 0000:00: root bus resource [bus 00-ff]
  185. [ 0.565383] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
  186. [ 0.565424] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
  187. [ 0.565530] pci 0000:00:00.0: PME# supported from D0 D3hot
  188. [ 0.566988] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  189. [ 0.567224] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
  190. [ 0.567314] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
  191. [ 0.567591] pci 0000:01:00.0: PME# supported from D0 D3hot
  192. [ 0.580435] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  193. [ 0.580456] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
  194. [ 0.580467] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
  195. [ 0.580486] pci 0000:00:00.0: PCI bridge to [bus 01]
  196. [ 0.580497] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
  197. [ 0.580770] bcm2708_fb soc:fb: Unable to determine number of FBs. Disabling driver.
  198. [ 0.580787] bcm2708_fb: probe of soc:fb failed with error -2
  199. [ 0.582656] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
  200. [ 0.583772] iproc-rng200 fe104000.rng: hwrng registered
  201. [ 0.583908] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
  202. [ 0.584282] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
  203. [ 0.584447] cacheinfo: Unable to detect cache hierarchy for CPU 0
  204. [ 0.589236] brd: module loaded
  205. [ 0.595111] loop: module loaded
  206. [ 0.595950] Loading iSCSI transport class v2.0-870.
  207. [ 0.597320] libphy: Fixed MDIO Bus: probed
  208. [ 0.597953] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
  209. [ 0.607149] libphy: bcmgenet MII bus: probed
  210. [ 0.643258] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
  211. [ 0.643782] usbcore: registered new interface driver r8152
  212. [ 0.643819] usbcore: registered new interface driver lan78xx
  213. [ 0.643844] usbcore: registered new interface driver smsc95xx
  214. [ 0.689420] pci 0000:00:00.0: enabling device (0000 -> 0002)
  215. [ 0.689536] xhci_hcd 0000:01:00.0: xHCI Host Controller
  216. [ 0.689554] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
  217. [ 0.689932] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000060000000890
  218. [ 0.690485] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
  219. [ 0.690494] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  220. [ 0.690501] usb usb1: Product: xHCI Host Controller
  221. [ 0.690508] usb usb1: Manufacturer: Linux 5.10.63-v8+ xhci-hcd
  222. [ 0.690514] usb usb1: SerialNumber: 0000:01:00.0
  223. [ 0.690827] hub 1-0:1.0: USB hub found
  224. [ 0.690886] hub 1-0:1.0: 1 port detected
  225. [ 0.691222] xhci_hcd 0000:01:00.0: xHCI Host Controller
  226. [ 0.691233] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
  227. [ 0.691244] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
  228. [ 0.691455] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
  229. [ 0.691463] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  230. [ 0.691470] usb usb2: Product: xHCI Host Controller
  231. [ 0.691476] usb usb2: Manufacturer: Linux 5.10.63-v8+ xhci-hcd
  232. [ 0.691482] usb usb2: SerialNumber: 0000:01:00.0
  233. [ 0.691750] hub 2-0:1.0: USB hub found
  234. [ 0.691781] hub 2-0:1.0: 4 ports detected
  235. [ 0.692391] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  236. [ 0.692750] usbcore: registered new interface driver uas
  237. [ 0.692791] usbcore: registered new interface driver usb-storage
  238. [ 0.692882] mousedev: PS/2 mouse device common for all mice
  239. [ 0.693666] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
  240. [ 0.694982] sdhci: Secure Digital Host Controller Interface driver
  241. [ 0.694990] sdhci: Copyright(c) Pierre Ossman
  242. [ 0.695290] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
  243. [ 0.695493] sdhci-pltfm: SDHCI platform and OF driver helper
  244. [ 0.697744] ledtrig-cpu: registered to indicate activity on CPUs
  245. [ 0.697880] hid: raw HID events driver (C) Jiri Kosina
  246. [ 0.697959] usbcore: registered new interface driver usbhid
  247. [ 0.697965] usbhid: USB HID core driver
  248. [ 0.698107] ashmem: initialized
  249. [ 0.701666] Initializing XFRM netlink socket
  250. [ 0.701692] NET: Registered protocol family 17
  251. [ 0.701759] Key type dns_resolver registered
  252. [ 0.702044] registered taskstats version 1
  253. [ 0.702061] Loading compiled-in X.509 certificates
  254. [ 0.702289] Key type ._fscrypt registered
  255. [ 0.702297] Key type .fscrypt registered
  256. [ 0.702303] Key type fscrypt-provisioning registered
  257. [ 0.707283] uart-pl011 fe201000.serial: there is not valid maps for state default
  258. [ 0.707397] uart-pl011 fe201000.serial: cts_event_workaround enabled
  259. [ 0.707453] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 21, base_baud = 0) is a PL011 rev2
  260. [ 2.006169] printk: console [ttyAMA0] enabled
  261. [ 2.018497] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
  262. [ 2.026701] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
  263. [ 2.032735] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
  264. [ 2.070768] of_cfs_init
  265. [ 2.073375] of_cfs_init: OK
  266. [ 2.077242] uart-pl011 fe201000.serial: no DMA platform data
  267. [ 2.099618] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  268. [ 2.103039] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
  269. [ 2.106905] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  270. [ 2.118148] Waiting for root device /dev/mmcblk0p3...
  271. [ 2.125468] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  272. [ 2.134407] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  273. [ 2.141861] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  274. [ 2.209937] mmc1: new high speed SDIO card at address 0001
  275. [ 2.241785] mmc0: new ultra high speed DDR50 SDHC card at address aaaa
  276. [ 2.249280] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
  277. [ 2.251197] usb 1-1: new high-speed USB device number 2 using xhci_hcd
  278. [ 2.260345] mmcblk0: p1 p2 p3
  279. [ 2.278404] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
  280. [ 2.286620] VFS: Mounted root (ext4 filesystem) readonly on device 179:3.
  281. [ 2.300744] devtmpfs: mounted
  282. [ 2.312755] Freeing unused kernel memory: 3712K
  283. [ 2.317494] Run /sbin/init as init process
  284. INIT: version 2.99 booting[ 2.413786] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
  285. [ 2.422048] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  286. [ 2.429203] usb 1-1: Product: USB2.0 Hub
  287. [ 2.435109] hub 1-1:1.0: USB hub found
  288. [ 2.439170] hub 1-1:1.0: 4 ports detected
  289.  
  290.  
  291. OpenRC 0.44.8 is starting up Gentoo Linux (aarch64)
  292.  
  293. * Mounting /proc ...
  294. * /etc/fstab does not exist
  295. [ ok ]
  296. * Mounting /run ...
  297. * /etc/fstab does not exist
  298. * /run/openrc: creating directory
  299. * /run/lock: creating directory
  300. * /run/lock: correcting owner
  301. * Caching service dependencies ...
  302. * /etc/fstab does not exist
  303. Service `dhcpd' needs non existent service `net'
  304. Service `dhcrelay' needs non existent service `net'
  305. Service `dhcrelay6' needs non existent service `net'
  306. Service `netmount' needs non existent service `net'
  307. [ ok ]
  308. * Clock skew detected with `(null)'
  309. * Adjusting mtime of `/run/openrc/deptree' to Fri Nov 26 08:33:23 2021
  310. * WARNING: clock skew detected!
  311. * Mounting /sys ...
  312. * /etc/fstab does not exist
  313. [ ok ]
  314. * Mounting security filesystem ...
  315. [ ok ]
  316. * Mounting debug filesystem ...
  317. [ ok ]
  318. * Mounting config filesystem ...
  319. [ ok ]
  320. * Mounting cgroup filesystem ...
  321. [ ok ]
  322. * /etc/fstab does not exist
  323. * Remounting devtmpfs on /dev ...
  324. [ ok ]
  325. * Mounting /dev/mqueue ...
  326. * /etc/fstab does not exist
  327. [ ok ]
  328. * Mounting /dev/pts ...
  329. * /etc/fstab does not exist
  330. [ ok ]
  331. * Mounting /dev/shm ...
  332. * /etc/fstab does not exist
  333. [ ok ]
  334. * Creating list of required static device nodes for the current kernel ...
  335. [ ok ]
  336. * Setting up tmpfiles.d entries for /dev ...
  337. Detected unsafe path transition / (owned by 1001) → /dev (owned by root) during canonicalization of /dev.
  338. Detected unsafe path transition / (owned by 1001) → /dev (owned by root) during canonicalization of /dev.
  339. Detected unsafe path transition / (owned by 1001) → /dev (owned by root) during canonicalization of /dev.
  340. Detected unsafe path transition / (owned by 1001) → /dev (owned by root) during canonicalization of /dev.
  341. Detected unsafe path transition / (owned by 1001) → /dev (owned by root) during canonicalization of /dev/net.
  342. Detected unsafe path transition / (owned by 1001) → /dev (owned by root) during canonicalization of /dev.
  343. Detected unsafe path transition / (owned by 1001) → /dev (owned by root) during canonicalization of /dev.
  344. Detected unsafe path transition / (owned by 1001) → /dev (owned by root) during canonicalization of /dev.
  345. Detected unsafe path transition / (owned by 1001) → /dev (owned by root) during canonicalization of /dev/mapper.
  346. Detected unsafe path transition / (owned by 1001) → /dev (owned by root) during canonicalization of /dev.
  347. Detected unsafe path transition / (owned by 1001) → /dev (owned by root) during canonicalization of /dev.
  348. Detected unsafe path transition / (owned by 1001) → /dev (owned by root) during canonicalization of /dev.
  349. Detected unsafe path transition / (owned by 1001) → /dev (owned by root) during canonicalization of /dev.
  350. Detected unsafe path transition / (owned by 1001) → /dev (owned by root) during canonicalization of /dev.
  351. Detected unsafe path transition / (owned by 1001) → /dev (owned by root) during canonicalization of /dev/snd.
  352. Detected unsafe path transition / (owned by 1001) → /dev (owned by root) during canonicalization of /dev/snd.
  353. Detected unsafe path transition / (owned by 1001) → /dev (owned by root) during canonicalization of /dev.
  354. [ !! ]
  355. * ERROR: stmpfiles-dev failed to start
  356. * Starting udev ...
  357. [ ok ]
  358. * Generating a rule to create a /dev/root symlink ...
  359. [ ok ]
  360. * Populating /dev with existing devices through uevents ...
  361. [ ok ]
  362. * WARNING: clock skew detected!
  363. * Setting system clock using the hardware clock [UTC] ...
  364. hwclock: Cannot access the Hardware Clock via any known method.
  365. hwclock: Use the --verbose option to see the details of our search for an access method.
  366. * Failed to set the system clock
  367. [ !! ]
  368. * The binfmt-misc module needs to be loaded by the modules service or built in.
  369. * Mounting misc binary format filesystem ...
  370. [ ok ]
  371. * Loading custom binary format handlers ...
  372. [ ok ]
  373. * Checking local filesystems ...
  374. [ ok ]
  375. * /etc/fstab does not exist
  376. * Remounting root filesystem read/write ...
  377. [ ok ]
  378. * Remounting filesystems ...
  379. * /etc/fstab does not exist
  380. [ ok ]
  381. * Updating /etc/mtab ...
  382. * Creating mtab symbolic link
  383. [ ok ]
  384. * Activating swap devices ...
  385. swapon: failed to parse /etc/fstab: No such file or directory
  386. [ ok ]
  387. * Mounting local filesystems ...
  388. [ ok ]
  389. * Configuring kernel parameters ...
  390. [ ok ]
  391. * Creating user login records ...
  392. [ ok ]
  393. * Wiping /tmp directory ...
  394. [ ok ]
  395. * Setting hostname to localhost ...
  396. [ ok ]
  397. * Setting terminal encoding [UTF-8] ...
  398. [ ok ]
  399. * Setting keyboard mode [UTF-8] ...
  400. [ ok ]
  401. * Loading key mappings [us] ...
  402. [ ok ]
  403. * Bringing up network interface lo ...
  404. [ ok ]
  405. * Saving key mapping ...
  406. [ ok ]
  407. * Saving terminal encoding ...
  408. [ ok ]
  409. * Setting up tmpfiles.d entries ...
  410. Detected unsafe path transition /var/lib (owned by 1001) → /var/lib/dhcp (owned by dhcp) during canonicalization of /var/lib/dhcp.
  411. Detected unsafe path transition / (owned by 1001) → /run (owned by root) during canonicalization of /run.
  412. Detected unsafe path transition / (owned by 1001) → /run (owned by root) during canonicalization of /run/sudo.
  413. Detected unsafe path transition / (owned by 1001) → /run (owned by root) during canonicalization of /run.
  414. [ !! ]
  415. * ERROR: stmpfiles-setup failed to start
  416. * Initializing random number generator ...
  417. [ ok ]
  418. INIT: Entering runlevel: 3
  419. * WARNING: clock skew detected!
  420. * ERROR: dhcpd needs service(s) net
  421. * Setting the local clock based on last shutdown time ...
  422. [ ok ]
  423. * ERROR: netmount needs service(s) net
  424. * Starting rpcbind ...
  425. [ ok ]
  426. * Starting NFS statd ...
  427. [ ok ]
  428. * Setting up RPC pipefs ...
  429. [ ok ]
  430. * Starting idmapd ...
  431. [ ok ]
  432. * Starting NFS sm-notify ...
  433. [ ok ]
  434. /var/empty must be owned by root and not group or world-writable.
  435. * ERROR: sshd failed to start
  436. * Setting up tmpfiles.d entries ...
  437. Detected unsafe path transition /var/lib (owned by 1001) → /var/lib/dhcp (owned by dhcp) during canonicalization of /var/lib/dhcp.
  438. Detected unsafe path transition / (owned by 1001) → /run (owned by root) during canonicalization of /run.
  439. Detected unsafe path transition / (owned by 1001) → /run (owned by root) during canonicalization of /run/sudo.
  440. Detected unsafe path transition / (owned by 1001) → /run (owned by root) during canonicalization of /run.
  441. [ !! ]
  442. * ERROR: stmpfiles-setup failed to start
  443. * Starting local ...
  444. [ ok ]
  445.  
  446.  
  447. This is localhost.unknown_domain (Linux aarch64 5.10.63-v8+) 13:45:53
  448.  
  449. localhost login:
  450.  
  451.  
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!