Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- first data training fail!
- col :11
- col :10
- chn 0 col 10, row 16
- sdram_init done
- DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=180
- DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=180
- DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=180
- DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=180
- ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
- DRV Pull-Up=0xb, DRV Pull-Dwn=0xb
- ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
- U-Boot SPL 2021.01-armbian (Feb 05 2022 - 10:21:35 +0300)
- Trying to boot from BOOTROM
- Returning to boot ROM...
- U-Boot 2021.01-armbian (Feb 05 2022 - 10:21:35 +0300)
- Model: RK3188 rbox
- DRAM: 2 GiB
- MMC: dwmmc@10214000: 0
- In: serial@20064000
- Out: serial@20064000
- Err: serial@20064000
- Model: RK3188 rbox
- Net: Net Initialization Skipped
- No ethernet found.
- Hit any key to stop autoboot: 0
- starting USB...
- Bus usb@10180000: USB DWC2
- Bus usb@101c0000: USB DWC2
- scanning bus usb@10180000 for devices... 1 USB Device(s) found
- scanning bus usb@101c0000 for devices... unable to get device descriptor (error=-22)
- 2 USB Device(s) found
- scanning usb for storage devices... 0 Storage Device(s) found
- Device 0: unknown device
- MMC Device 1 not found
- no mmc device at slot 1
- switch to partitions #0, OK
- mmc0 is current device
- Scanning mmc 0:1...
- Found /boot/extlinux/extlinux.conf
- Retrieving file: /boot/extlinux/extlinux.conf
- 363 bytes read in 10 ms (35.2 KiB/s)
- 1: Armbian
- Retrieving file: /boot/uInitrd
- 7357675 bytes read in 2013 ms (3.5 MiB/s)
- Retrieving file: /boot/zImage
- 6819336 bytes read in 1866 ms (3.5 MiB/s)
- append: root=UUID=50842296-a574-4d90-8947-bf79580a6670 console=uart8250,mmio32,0x20064000 console=tty0 coherent_pool=2M rootflags=data=writeback rw no_console_suspend=1 consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 bootsplash.bootfile=bootsplash.armbian
- Retrieving file: /boot/dtb/rk3188-rbox-cs968.dtb
- 28737 bytes read in 19 ms (1.4 MiB/s)
- ## Loading init Ramdisk from Legacy Image at 64000000 ...
- Image Name: uInitrd
- Image Type: ARM Linux RAMDisk Image (gzip compressed)
- Data Size: 7357611 Bytes = 7 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Verifying Checksum ... OK
- ## Flattened Device Tree blob at 61f00000
- Booting using the fdt blob at 0x61f00000
- Loading Ramdisk to 6f8fb000, end 6ffff4ab ... OK
- Loading Device Tree to 6f8f0000, end 6f8fa040 ... OK
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 5.10.96-rk3188 (root@vbox) (arm-linux-gnueabihf-gcc (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 8.3.0, GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 2.32.0.20190321) #trunk SMP Sat Feb 5 11:11:22 MSK 2022
- [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] OF: fdt: Machine model: RK3188T CS968
- [ 0.000000] earlycon: uart8250 at MMIO32 0x20064000 (options '')
- [ 0.000000] printk: bootconsole [uart8250] enabled
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] cma: Reserved 256 MiB at 0xd0000000
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x0000000060000000-0x000000008fffffff]
- [ 0.000000] HighMem [mem 0x0000000090000000-0x00000000dfffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000060000000-0x00000000dfffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x00000000dfffffff]
- [ 0.000000] percpu: Embedded 16 pages/cpu s33228 r8192 d24116 u65536
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560
- [ 0.000000] Kernel command line: root=UUID=50842296-a574-4d90-8947-bf79580a6670 console=uart8250,mmio32,0x20064000 console=tty0 coherent_pool=2M rootflags=data=writeback rw no_console_suspend=1 consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 bootsplash.bootfile=bootsplash.armbian
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 1791744K/2097152K available (10240K kernel code, 783K rwdata, 3328K rodata, 1024K init, 307K bss, 43264K reserved, 262144K cma-reserved, 1048576K highmem)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] rcu: Hierarchical RCU implementation.
- [ 0.000000] Tracing variant of Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
- [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
- [ 0.000000] L2C: DT/platform modifies aux control register: 0x02050000 -> 0x32050000
- [ 0.000000] L2C-310 erratum 769419 enabled
- [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
- [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
- [ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines
- [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
- [ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB
- [ 0.000000] L2C-310: CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001
- [ 0.000000] random: get_random_bytes called from start_kernel+0x5c8/0x788 with crng_init=0
- [ 0.000000] clocksource: rk_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
- [ 0.000009] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
- [ 0.009282] Console: colour dummy device 80x30
- [ 0.014198] printk: console [tty0] enabled
- [ 0.018729] printk: bootconsole [uart8250] disabled
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement