Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- dmesg
- [ 0.000000] Linux version 5.10.87 (ru@ubuntu-vm) (mipsel-openwrt-linux-musl-gcc (OpenWrt GCC 11.2.0 r18396-3c904ec901) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 SMP Sun Dec 26 01:16:42 2021
- [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
- [ 0.000000] printk: bootconsole [early0] enabled
- [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
- [ 0.000000] MIPS: machine is Beeline SmartBox Flash
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] VPE topology {2,2} total 4
- [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
- [ 0.000000] HighMem empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
- [ 0.000000] On node 0 totalpages: 65536
- [ 0.000000] Normal zone: 576 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 65536 pages, LIFO batch:15
- [ 0.000000] percpu: Embedded 15 pages/cpu s30096 r8192 d23152 u61440
- [ 0.000000] pcpu-alloc: s30096 r8192 d23152 u61440 alloc=15*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960
- [ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
- [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
- [ 0.000000] Writing ErrCtl register=000200c4
- [ 0.000000] Readback ErrCtl register=000200c4
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 249176K/262144K available (6654K kernel code, 623K rwdata, 1352K rodata, 1276K init, 235K bss, 12968K reserved, 0K cma-reserved, 0K highmem)
- [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] rcu: Hierarchical RCU implementation.
- [ 0.000000] Tracing variant of Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
- [ 0.000000] NR_IRQS: 256
- [ 0.000000] random: get_random_bytes called from start_kernel+0x3cc/0x5e4 with crng_init=0
- [ 0.000000] CPU Clock: 880MHz
- [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
- [ 0.000014] sched_clock: 64 bits at 880MHz, resolution 1ns, wraps every 4398046511103ns
- [ 0.007949] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
- [ 0.016924] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
- [ 0.083095] pid_max: default: 32768 minimum: 301
- [ 0.087864] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.095068] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.105506] rcu: Hierarchical SRCU implementation.
- [ 0.110511] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
- [ 0.118549] smp: Bringing up secondary CPUs ...
- [ 0.123723] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.123734] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 0.123747] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 0.123825] CPU1 revision is: 0001992f (MIPS 1004Kc)
- [ 0.178434] Synchronize counters for CPU 1: done.
- [ 0.210884] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.210893] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 0.210901] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 0.210949] CPU2 revision is: 0001992f (MIPS 1004Kc)
- [ 0.269777] Synchronize counters for CPU 2: done.
- [ 0.300234] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.300242] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 0.300250] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 0.300303] CPU3 revision is: 0001992f (MIPS 1004Kc)
- [ 0.354963] Synchronize counters for CPU 3: done.
- [ 0.384824] smp: Brought up 1 node, 4 CPUs
- [ 0.392988] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.402815] futex hash table entries: 1024 (order: 3, 32768 bytes, linear)
- [ 0.409841] pinctrl core: initialized pinctrl subsystem
- [ 0.416933] NET: Registered protocol family 16
- [ 0.423427] cpuidle: using governor teo
- [ 0.430336] rt2880-pinmux pinctrl: invalid group "uartlite3" for function "gpio"
- [ 0.448424] FPU Affinity set after 11720 emulations
- [ 0.454820] random: fast init done
- [ 0.476132] clocksource: Switched to clocksource GIC
- [ 0.482857] NET: Registered protocol family 2
- [ 0.487427] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
- [ 0.495322] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
- [ 0.503711] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
- [ 0.511316] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
- [ 0.518392] TCP: Hash tables configured (established 2048 bind 2048)
- [ 0.524814] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
- [ 0.531300] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
- [ 0.538461] NET: Registered protocol family 1
- [ 0.542756] PCI: CLS 0 bytes, default 32
- [ 0.549275] workingset: timestamp_bits=14 max_order=16 bucket_order=2
- [ 0.559977] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.565723] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 0.578269] mt7621_gpio 1e000600.gpio: registering 32 gpios
- [ 0.584121] mt7621_gpio 1e000600.gpio: registering 32 gpios
- [ 0.590113] mt7621_gpio 1e000600.gpio: registering 32 gpios
- [ 0.596644] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
- [ 0.604573] printk: console [ttyS0] disabled
- [ 0.608926] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
- [ 0.617935] printk: console [ttyS0] enabled
- [ 0.634421] printk: bootconsole [early0] disabled
- [ 0.655342] mt7621-nand 1e003000.nand: Using programmed access timing: 31c07388
- [ 0.670270] nand: device found, Manufacturer ID: 0xef, Chip ID: 0xf1
- [ 0.682931] nand: Winbond W29N01HV
- [ 0.689709] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
- [ 0.704792] mt7621-nand 1e003000.nand: ECC strength adjusted to 4 bits
- [ 0.717836] mt7621-nand 1e003000.nand: Using programmed access timing: 21005134
- [ 0.732394] mt7621-nand 1e003000.nand: Using programmed access timing: 21005134
- [ 0.746951] Scanning device for bad blocks
- [ 1.398870] 15 fixed-partitions partitions found on MTD device mt7621-nand
- [ 1.412561] Creating 15 MTD partitions on "mt7621-nand":
- [ 1.423152] 0x000000000000-0x000007f80000 : "all"
- [ 1.434033] 0x000000000000-0x000000100000 : "bootloader"
- [ 1.445849] 0x000000100000-0x000000200000 : "config"
- [ 1.456808] 0x000000200000-0x000000300000 : "factory"
- [ 1.468013] 0x000000300000-0x000002300000 : "stock_kernel0"
- [ 1.480438] 0x000000720000-0x000002300000 : "stock_kernel0"
- [ 1.492668] 0x000002300000-0x000004300000 : "stock_kernel1"
- [ 1.504874] 0x000002720000-0x000004300000 : "stock_kernel1"
- [ 1.517109] 0x000004300000-0x000004500000 : "stock_glbcfg"
- [ 1.529027] 0x000004500000-0x000004600000 : "stock_board_data"
- [ 1.541650] 0x000004600000-0x000004800000 : "stock_glbcfg2"
- [ 1.553762] 0x000004800000-0x000004900000 : "stock_board_data2"
- [ 1.566619] 0x000004900000-0x000007f80000 : "stock_data"
- [ 1.578422] 0x000002720000-0x000004300000 : "ubipart0"
- [ 1.589793] 0x000004600000-0x000007f80000 : "ubipart1"
- [ 1.610458] Concatenating MTD devices:
- [ 1.617976] (0): "ubipart0"
- [ 1.623526] (1): "ubipart1"
- [ 1.629093] into device "ubi-concat"
- [ 1.636262] 1 fixed-partitions partitions found on MTD device ubi-concat
- [ 1.649599] Creating 1 MTD partitions on "ubi-concat":
- [ 1.659838] 0x000000000000-0x000005280000 : "ubi"
- [ 1.673488] libphy: Fixed MDIO Bus: probed
- [ 1.717020] libphy: mdio: probed
- [ 1.723778] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
- [ 1.738293] mtk_soc_eth 1e100000.ethernet: generated random MAC address f6:25:b1:b2:7a:95
- [ 1.755413] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
- [ 1.773826] mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges:
- [ 1.787329] mt7621-pci 1e140000.pcie: No bus range found for /pcie@1e140000, using [bus 00-ff]
- [ 1.804945] mt7621-pci 1e140000.pcie: MEM 0x0060000000..0x006fffffff -> 0x0000000000
- [ 1.821370] mt7621-pci 1e140000.pcie: IO 0x001e160000..0x001e16ffff -> 0x0000000000
- [ 1.837861] mt7621-pci 1e140000.pcie: Parsing DT failed
- [ 1.850587] NET: Registered protocol family 10
- [ 1.860933] Segment Routing with IPv6
- [ 1.868457] NET: Registered protocol family 17
- [ 1.877701] 8021q: 802.1Q VLAN Support v1.8
- [ 1.889394] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
- [ 1.914639] libphy: dsa slave smi: probed
- [ 1.924194] mt7530 mdio-bus:1f lan2 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY] (irq=POLL)
- [ 1.944288] mt7530 mdio-bus:1f lan1 (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY] (irq=POLL)
- [ 1.964435] mt7530 mdio-bus:1f wan (uninitialized): PHY [dsa-0.0:04] driver [Generic PHY] (irq=POLL)
- [ 1.985344] mt7530 mdio-bus:1f: configuring for fixed/rgmii link mode
- [ 2.002350] DSA: tree 0 setup
- [ 2.008647] rt2880-pinmux pinctrl: pcie is already enabled
- [ 2.019696] mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges:
- [ 2.033066] mt7621-pci 1e140000.pcie: No bus range found for /pcie@1e140000, using [bus 00-ff]
- [ 2.050608] mt7621-pci 1e140000.pcie: MEM 0x0060000000..0x006fffffff -> 0x0000000000
- [ 2.066913] mt7621-pci 1e140000.pcie: IO 0x001e160000..0x001e16ffff -> 0x0000000000
- [ 2.083297] mt7621-pci-phy 1e149000.pcie-phy: PHY for 0xbe149000 (dual port = 1)
- [ 2.098406] mt7621-pci-phy 1e14a000.pcie-phy: PHY for 0xbe14a000 (dual port = 0)
- [ 2.113409] mt7621-pci 1e140000.pcie: failed to parse bus ranges property: -22
- [ 2.227995] mt7621-pci-phy 1e149000.pcie-phy: Xtal is 40MHz
- [ 2.239114] mt7621-pci-phy 1e14a000.pcie-phy: Xtal is 40MHz
- [ 2.350369] mt7621-pci 1e140000.pcie: pcie0 no card, disable it (RST & CLK)
- [ 2.364232] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK)
- [ 2.378104] mt7621-pci 1e140000.pcie: PCIE1 enabled
- [ 2.387825] mt7621-pci 1e140000.pcie: PCI coherence region base: 0x60000000, mask/settings: 0xf0000002
- [ 2.406526] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00
- [ 2.419210] pci_bus 0000:00: root bus resource [io 0x1e160000-0x1e16ffff]
- [ 2.432908] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
- [ 2.446608] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 2.457541] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff] (bus address [0x00000000-0x0fffffff])
- [ 2.477862] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
- [ 2.489845] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
- [ 2.502333] pci 0000:00:00.0: reg 0x14: initial BAR value 0x00000000 invalid
- [ 2.516389] pci 0000:00:00.0: reg 0x14: [mem size 0x00010000]
- [ 2.527917] pci 0000:00:00.0: supports D1
- [ 2.535885] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
- [ 2.548763] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 2.564984] pci 0000:01:00.0: [14c3:7615] type 00 class 0x000280
- [ 2.577011] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid
- [ 2.591058] pci 0000:01:00.0: reg 0x10: [mem size 0x00100000 64bit]
- [ 2.603710] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
- [ 2.634658] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
- [ 2.645107] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff]
- [ 2.657259] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
- [ 2.670781] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff pref]
- [ 2.685172] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
- [ 2.698404] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
- [ 2.711580] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
- [ 2.725449] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
- [ 2.738978] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
- [ 2.753367] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
- [ 2.766906] pci 0000:00:00.0: BAR 7: assigned [io 0x1e160000-0x1e160fff]
- [ 2.780440] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
- [ 2.795009] pci 0000:00:00.0: PCI bridge to [bus 01]
- [ 2.804902] pci 0000:00:00.0: bridge window [io 0x1e160000-0x1e160fff]
- [ 2.818428] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
- [ 2.831956] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref]
- [ 2.848577] UBI: auto-attach mtd15
- [ 2.855371] ubi0: attaching mtd15
- [ 2.862383] mt7530 mdio-bus:1f: Link is Up - 1Gbps/Full - flow control off
- [ 2.922056] UBI: EOF marker found, PEBs from 42 will be erased
- [ 2.934304] ubi0: scanning is finished
- [ 2.984178] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 602 LEBs
- [ 2.998321] ubi0: attached mtd15 (name "ubi", size 82 MiB)
- [ 3.009374] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
- [ 3.023071] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
- [ 3.036595] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
- [ 3.050463] ubi0: good PEBs: 660, bad PEBs: 0, corrupted PEBs: 0
- [ 3.062432] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
- [ 3.076823] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1640481402
- [ 3.095005] ubi0: available PEBs: 0, total reserved PEBs: 660, PEBs reserved for bad PEB handling: 14
- [ 3.113397] ubi0: background thread "ubi_bgt0d" started, PID 443
- [ 3.115805] block ubiblock0_0: created from ubi0:0(rootfs)
- [ 3.136410] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
- [ 3.183248] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
- [ 3.202769] Freeing unused kernel memory: 1276K
- [ 3.211916] This architecture does not have kernel memory protection.
- [ 3.224809] Run /sbin/init as init process
- [ 3.233013] with arguments:
- [ 3.233033] /sbin/init
- [ 3.233047] with environment:
- [ 3.233062] HOME=/
- [ 3.233076] TERM=linux
- [ 3.894441] init: Console is alive
- [ 3.901719] init: - watchdog -
- [ 4.928737] kmodloader: loading kernel modules from /etc/modules-boot.d/*
- [ 5.030291] usbcore: registered new interface driver usbfs
- [ 5.041441] usbcore: registered new interface driver hub
- [ 5.052189] usbcore: registered new device driver usb
- [ 5.072983] xhci-mtk 1e1c0000.xhci: supply vbus not found, using dummy regulator
- [ 5.088038] xhci-mtk 1e1c0000.xhci: supply vusb33 not found, using dummy regulator
- [ 5.103364] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
- [ 5.114012] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
- [ 5.136330] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000290010
- [ 5.154620] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
- [ 5.167132] hub 1-0:1.0: USB hub found
- [ 5.174747] hub 1-0:1.0: 2 ports detected
- [ 5.183297] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
- [ 5.193949] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
- [ 5.208891] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
- [ 5.221746] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 5.238605] hub 2-0:1.0: USB hub found
- [ 5.246262] hub 2-0:1.0: 1 port detected
- [ 5.261650] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
- [ 5.286583] init: - preinit -
- [ 6.190874] random: jshn: uninitialized urandom read (4 bytes read)
- [ 6.270499] random: jshn: uninitialized urandom read (4 bytes read)
- [ 6.791870] random: jshn: uninitialized urandom read (4 bytes read)
- [ 7.058457] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
- [ 7.074643] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
- [ 7.076663] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode
- [ 7.104987] 8021q: adding VLAN 0 to HW filter on device lan1
- [ 7.118946] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 11.257296] mt7530 mdio-bus:1f lan1: Link is Up - 1Gbps/Full - flow control rx/tx
- [ 11.272320] IPv6: ADDRCONF(NETDEV_CHANGE): lan1: link becomes ready
- [ 11.381124] UBIFS (ubi0:1): default file-system created
- [ 11.392909] UBIFS (ubi0:1): Mounting in unauthenticated mode
- [ 11.404516] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 584
- [ 11.531265] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
- [ 11.546912] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
- [ 11.566656] UBIFS (ubi0:1): FS size: 75169792 bytes (71 MiB, 592 LEBs), journal size 3809280 bytes (3 MiB, 30 LEBs)
- [ 11.587439] UBIFS (ubi0:1): reserved for root: 3550454 bytes (3467 KiB)
- [ 11.600622] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 5148659F-0DC3-45DC-9296-BE734BF0F6D3, small LPT model
- [ 11.626663] mount_root: overlay filesystem has not been fully initialized yet
- [ 11.641766] mount_root: switching to ubifs overlay
- [ 11.659928] urandom-seed: Seed file not found (/etc/urandom.seed)
- [ 11.824675] mt7530 mdio-bus:1f lan1: Link is Down
- [ 11.844243] procd: - early -
- [ 11.850387] procd: - watchdog -
- [ 12.506364] procd: - watchdog -
- [ 12.513298] procd: - ubus -
- [ 12.683610] procd: - init -
- [ 13.439642] kmodloader: loading kernel modules from /etc/modules.d/*
- [ 13.659676] Loading modules backported from Linux version v5.15.8-0-g43e577d7a2cb
- [ 13.674656] Backport generated by backports.git v5.15.8-1-0-g83f664bb
- [ 13.686541] urngd: v1.0.2 started.
- [ 13.717276] xt_time: kernel timezone is -0000
- [ 13.879313] mt7621-pci 1e140000.pcie: bus=1 slot=0 irq=23
- [ 13.890235] pci 0000:00:00.0: enabling device (0004 -> 0007)
- [ 13.897189] random: crng init done
- [ 13.901545] mt7615e 0000:01:00.0: enabling device (0000 -> 0002)
- [ 13.908307] random: 7 urandom warning(s) missed due to ratelimiting
- [ 13.936882] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- [ 13.942778] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
- [ 13.957158] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
- [ 13.957158]
- [ 13.968216] PPP generic driver version 2.4.2
- [ 13.988440] NET: Registered protocol family 24
- [ 14.017195] kmodloader: done loading kernel modules from /etc/modules.d/*
- [ 14.290146] mt7615e 0000:01:00.0: N9 Firmware Version: _reserved_, Build Time: 20200814163649
- [ 14.414943] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20190121161307
- [ 37.321846] mtk_soc_eth 1e100000.ethernet eth0: Link is Down
- [ 37.342838] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
- [ 37.359099] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
- [ 37.362183] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode
- [ 37.389706] 8021q: adding VLAN 0 to HW filter on device lan1
- [ 37.404118] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 37.418081] br-lan: port 1(lan1) entered blocking state
- [ 37.428647] br-lan: port 1(lan1) entered disabled state
- [ 37.440582] device lan1 entered promiscuous mode
- [ 37.450117] device eth0 entered promiscuous mode
- [ 37.488853] mt7530 mdio-bus:1f lan2: configuring for phy/gmii link mode
- [ 37.503104] 8021q: adding VLAN 0 to HW filter on device lan2
- [ 37.518210] br-lan: port 2(lan2) entered blocking state
- [ 37.528677] br-lan: port 2(lan2) entered disabled state
- [ 37.540502] device lan2 entered promiscuous mode
- [ 37.569026] mt7530 mdio-bus:1f wan: configuring for phy/gmii link mode
- [ 37.582773] 8021q: adding VLAN 0 to HW filter on device wan
- [ 39.070718] br-lan: port 3(wlan0) entered blocking state
- [ 39.081398] br-lan: port 3(wlan0) entered disabled state
- [ 39.092958] device wlan0 entered promiscuous mode
- [ 39.153098] br-lan: port 4(wlan1) entered blocking state
- [ 39.163872] br-lan: port 4(wlan1) entered disabled state
- [ 39.175357] device wlan1 entered promiscuous mode
- [ 39.185279] br-lan: port 4(wlan1) entered blocking state
- [ 39.196270] br-lan: port 4(wlan1) entered forwarding state
- [ 39.207673] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
- [ 39.376887] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 39.390232] br-lan: port 3(wlan0) entered blocking state
- [ 39.401230] br-lan: port 3(wlan0) entered forwarding state
- [ 39.476753] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
- [ 40.536950] mt7530 mdio-bus:1f lan1: Link is Up - 10Mbps/Full - flow control off
- [ 40.551779] br-lan: port 1(lan1) entered blocking state
- [ 40.562212] br-lan: port 1(lan1) entered forwarding state
- [ 42.616486] mt7530 mdio-bus:1f lan1: Link is Down
- [ 42.625997] br-lan: port 1(lan1) entered disabled state
- [ 45.737108] mt7530 mdio-bus:1f lan1: Link is Up - 1Gbps/Full - flow control rx/tx
- [ 45.752099] br-lan: port 1(lan1) entered blocking state
- [ 45.762745] br-lan: port 1(lan1) entered forwarding state
- cat /sys/class/ubi/ubi0/mtd_num
- 15
- cat /proc/mtd
- dev: size erasesize name
- mtd0: 07f80000 00020000 "all"
- mtd1: 00100000 00020000 "bootloader"
- mtd2: 00100000 00020000 "config"
- mtd3: 00100000 00020000 "factory"
- mtd4: 02000000 00020000 "stock_kernel0"
- mtd5: 01be0000 00020000 "stock_kernel0"
- mtd6: 02000000 00020000 "stock_kernel1"
- mtd7: 01be0000 00020000 "stock_kernel1"
- mtd8: 00200000 00020000 "stock_glbcfg"
- mtd9: 00100000 00020000 "stock_board_data"
- mtd10: 00200000 00020000 "stock_glbcfg2"
- mtd11: 00100000 00020000 "stock_board_data2"
- mtd12: 03680000 00020000 "stock_data"
- mtd13: 01be0000 00020000 "ubipart0"
- mtd14: 03980000 00020000 "ubipart1"
- mtd15: 05280000 00020000 "ubi"
- ubinfo -a
- UBI version: 1
- Count of UBI devices: 1
- UBI control device major/minor: 10:62
- Present UBI devices: ubi0
- ubi0
- Volumes count: 2
- Logical eraseblock size: 126976 bytes, 124.0 KiB
- Total amount of logical eraseblocks: 660 (83804160 bytes, 79.9 MiB)
- Amount of available logical eraseblocks: 0 (0 bytes)
- Maximum count of volumes 128
- Count of bad physical eraseblocks: 0
- Count of reserved physical eraseblocks: 14
- Current maximum erase counter value: 2
- Minimum input/output unit size: 2048 bytes
- Character device major/minor: 251:0
- Present volumes: 0, 1
- Volume ID: 0 (on ubi0)
- Type: dynamic
- Alignment: 1
- Size: 40 LEBs (5079040 bytes, 4.8 MiB)
- State: OK
- Name: rootfs
- Character device major/minor: 251:1
- -----------------------------------
- Volume ID: 1 (on ubi0)
- Type: dynamic
- Alignment: 1
- Size: 602 LEBs (76439552 bytes, 72.8 MiB)
- State: OK
- Name: rootfs_data
- Character device major/minor: 251:2
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement