Texas Instruments X-Loader 1.41 (Sep  1 2010 - 13:43:00)
mmc read: Invalid size
Starting OS Bootloader from MMC/SD1 ...


U-Boot 1.1.4-gcebe815a-dirty (Aug 16 2010 - 10:34:46)

Load address: 0x80e80000
DRAM:  512 MB
Flash:  0 kB
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   KS8851SNL
Hit any key to stop autoboot:  3  2  1  0
mmc read: Invalid size

2665748 bytes read
## Booting image at 80300000 ...
   Image Name:   Linux-2.6.35-g6d019da-dirty
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2665684 Bytes =  2.5 MB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Linux version 2.6.35-g6d019da-dirty (danders@ccd-dev) (gcc version 4.3.3 (GCC) ) #15 SMP PREEMPT Wed Sep 8 15:33:37 CDT 2010
CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: OMAP4430 Panda Board
Memory policy: ECC disabled, Data cache writealloc
OMAP4430 ES2.0
SRAM: Mapped pa 0x40300000 to va 0xfe400000 size: 0x100000
FIXME: omap44xx_sram_init not implemented
Reserving 33554432 bytes SDRAM for VRAM
PERCPU: Embedded 6 pages/cpu @c2944000 s4000 r8192 d12384 u65536
pcpu-alloc: s4000 r8192 d12384 u65536 alloc=16*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 117602
Kernel command line: root=/dev/mmcblk0p2 ro rootwait mem=463M console=ttyO2,115200n8 init=/linuxrc earlyprintk
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 463MB = 463MB total
Memory: 431444k/431444k available, 42668k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
    vmalloc : 0xdd000000 - 0xf8000000   ( 432 MB)
    lowmem  : 0xc0000000 - 0xdcf00000   ( 463 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .init : 0xc0008000 - 0xc0033000   ( 172 kB)
      .text : 0xc0033000 - 0xc0507000   (4944 kB)
      .data : 0xc0508000 - 0xc056cda0   ( 404 kB)
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
	RCU-based detection of stalled CPUs is disabled.
	Verbose stalled-CPUs detection is disabled.
NR_IRQS:388
omap_hwmod: sys_32k_ck: missing clockdomain for sys_32k_ck.
omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
omap_hwmod: gpio2: failed to reset in 10000 usec
omap_hwmod: gpio3: failed to reset in 10000 usec
omap_hwmod: gpio4: failed to reset in 10000 usec
omap_hwmod: gpio5: failed to reset in 10000 usec
omap_hwmod: gpio6: failed to reset in 10000 usec
omap_hwmod: gpu: cannot be enabled (3)
omap_hwmod: i2c1: failed to reset in 10000 usec
omap_hwmod: i2c2: failed to reset in 10000 usec
omap_hwmod: i2c3: failed to reset in 10000 usec
omap_hwmod: i2c4: failed to reset in 10000 usec
omap_hwmod: iva: cannot be enabled (3)
omap_hwmod: omap-mcpdm-dai: cannot be enabled (3)
GPMC revision 6.0
 dmtimer.0: omap_dm_timer_probe:[id=0]
 dmtimer.0:  registered
 dmtimer.1: omap_dm_timer_probe:[id=1]
 dmtimer.1:  registered
 dmtimer.9: omap_dm_timer_probe:[id=9]
 dmtimer.9:  registered
OMAP clockevent source: GPTIMER1 at 32768 Hz
Console: colour dummy device 80x30
Calibrating delay loop... 2013.49 BogoMIPS (lpj=7864320)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
Calibrating local timer... 491.15MHz.
L310 cache controller enabled
l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x0e070000
CPU1: Booted secondary processor
Brought up 2 CPUs
SMP: Total of 2 processors activated (3976.57 BogoMIPS).
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
OMAP GPIO hardware version 0.1
PandaBoard Revision: 002
OMAP DMA hardware revision 0.0
dma dma.0: System DMA registered
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i2c_omap i2c_omap.1: bus 1 rev4.0 at 400 kHz
Skipping twl internal clock init and using bootloader value (unknown osc rate)
twl6030: PIH (irq 39) chaining IRQs 368..387
regulator: VMMC: 1200 <--> 3000 mV at 3000 mV normal standby
regulator: VPP: 1800 <--> 2500 mV at 1900 mV normal standby
regulator: VANA: 2100 mV normal standby
regulator: VCXIO: 1800 mV normal standby
regulator: VDAC: 1800 mV normal standby
regulator: VUSB: 3300 mV normal standby
regulator: VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby
regulator: VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby
Advanced Linux Sound Architecture Driver Version 1.0.23.
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource timer-32k
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
sdp4430_wifi_init: start
omap-iommu omap-iommu.0: ducati registered
omap-iommu omap-iommu.1: tesla registered
iovmm-omap initialized ducati, major: 251, base-minor: 0
iovmm-omap initialized tesla, major: 251, base-minor: 1
dmtimer dmtimer.0: omap_dm_timer_probe:[id=0]
dmtimer dmtimer.1: omap_dm_timer_probe:[id=1]
dmtimer dmtimer.9: omap_dm_timer_probe:[id=9]
dmtimer dmtimer.2: omap_dm_timer_probe:[id=2]
dmtimer dmtimer.2:  registered
dmtimer dmtimer.3: omap_dm_timer_probe:[id=3]
dmtimer dmtimer.3:  registered
dmtimer dmtimer.4: omap_dm_timer_probe:[id=4]
dmtimer dmtimer.4:  registered
dmtimer dmtimer.5: omap_dm_timer_probe:[id=5]
dmtimer dmtimer.5:  registered
dmtimer dmtimer.6: omap_dm_timer_probe:[id=6]
dmtimer dmtimer.6:  registered
dmtimer dmtimer.7: omap_dm_timer_probe:[id=7]
dmtimer dmtimer.7:  registered
dmtimer dmtimer.8: omap_dm_timer_probe:[id=8]
dmtimer dmtimer.8:  registered
dmtimer dmtimer.10: omap_dm_timer_probe:[id=10]
dmtimer dmtimer.10:  registered
omap-remoteproc omap-remoteproc.0: omap_rproc_probe: adding rproc tesla
omap-remoteproc omap-remoteproc.0: omap-rproc initialized tesla, major: 250, base-minor: 0
omap-remoteproc omap-remoteproc.1: omap_rproc_probe: adding rproc ducati-proc0
omap-remoteproc omap-remoteproc.1: omap-rproc initialized ducati-proc0, major: 250, base-minor: 1
omap-remoteproc omap-remoteproc.2: omap_rproc_probe: adding rproc ducati-proc1
omap-remoteproc omap-remoteproc.2: omap-rproc initialized ducati-proc1, major: 250, base-minor: 2
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 842
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
OMAP DSS rev 4.0
OMAP DISPC rev 4.0
OMAP DSI rev 3.0
OMAP DSI2 rev 3.0
OMAP HDMI W1 rev 2.0
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
omap-hsuart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
omap-hsuart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
omap-hsuart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
console [ttyO2] enabled
omap-hsuart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
brd: module loaded
loop: module loaded
usbcore: registered new interface driver smsc95xx
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00
ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OMAP-EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.35-g6d019da-dirty ehci_hcd
usb usb1: SerialNumber: ehci-omap.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
twl_rtc twl_rtc: Power up reset detected.
twl_rtc twl_rtc: Enabling TWL-RTC.
i2c /dev entries driver
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
Linux video capture interface: v2.00
OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
proc4430_drv_initializeModule
omap-devicehandler omap-devicehandler.0: omap_devh_probe: adding devh Tesla
omap-devh initialized Tesla, major: 243, base-minor: 0
omap-devicehandler omap-devicehandler.1: omap_devh_probe: adding devh SysM3
omap-devh initialized SysM3, major: 243, base-minor: 1
omap-devicehandler omap-devicehandler.2: omap_devh_probe: adding devh AppM3
omap-devh initialized AppM3, major: 243, base-minor: 2
SDP4430 SoC init
asoc: null-codec-dai <-> MultiMedia1 mapping ok
asoc: null-codec-dai <-> MultiMedia2 mapping ok
asoc: null-codec-dai <-> Voice mapping ok
asoc: null-codec-dai <-> Tones mapping ok
asoc: null-codec-dai <-> Vibra mapping ok
asoc: null-codec-dai <-> MODEM mapping ok
asoc: HDMI <-> hdmi-dai mapping ok
asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
asoc: twl6040-dl1 <-> omap-mcpdm-dai mapping ok
asoc: twl6040-dl1 <-> omap-mcpdm-dai mapping ok
asoc: twl6040-ul <-> omap-mcpdm-dai mapping ok
asoc: twl6040-dl2 <-> omap-mcpdm-dai mapping ok
asoc: twl6040-vib <-> omap-mcpdm-dai mapping ok
asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
asoc: MODEM <-> omap-mcbsp-dai.1 mapping ok
asoc: dmic-hifi <-> omap-dmic-dai.0 mapping ok
asoc: dmic-hifi <-> omap-dmic-dai.1 mapping ok
asoc: dmic-hifi <-> omap-dmic-dai.2 mapping ok
input: SDP4430 Headset Jack as /devices/platform/soc-audio/sound/card0/input0
ALSA device list:
  #0: SDP4430
TCP cubic registered
NET: Registered protocol family 17
Bluetooth: L2CAP ver 2.14
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
lib80211: common routines for IEEE802.11 drivers
ThumbEE CPU extension supported.
omap_hwmod: Initialize debugfs support
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
Console: switching to colour frame buffer device 240x67
regulator_init_complete: incomplete constraints, leaving VAUX3_6030 on
regulator_init_complete: incomplete constraints, leaving VAUX2_6030 on
regulator_init_complete: incomplete constraints, leaving VUSB on
regulator_init_complete: incomplete constraints, leaving VDAC on
regulator_init_complete: incomplete constraints, leaving VCXIO on
regulator_init_complete: incomplete constraints, leaving VANA on
regulator_init_complete: incomplete constraints, leaving VPP on
twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
omap_vout omap_vout: : registered and initialized video device 0
omap_vout omap_vout: : registered and initialized video device 1
omap_vout omap_vout: : registered and initialized video device 2
omap_wb: registered and initialized wb device 3 [v4l2]
Waiting for root device /dev/mmcblk0p2...