Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- <6>[ 0.000000] Initializing cgroup subsys cpu
- <5>[ 0.000000] Linux version 3.0.101 (zendrokat@zendrokat-SATELLITE-C855-1Z1) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 PREEMPT Sat Jan 25 18:38:36 CET 2014
- <4>[ 0.000000] CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c53c7d
- <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
- <4>[ 0.000000] Machine: wave2
- <4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
- <4>[ 0.000000] CPU S5PV210/S5PC110 (id 0x43110222)
- <7>[ 0.000000] s5pv210_init_clocks: initializing clocks
- <6>[ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
- <4>[ 0.000000] s3c24xx_register_clock: new clock sclk_csis, id -1, dev (null) uses same enable bit as mout_csis, id -1, dev (null)
- <4>[ 0.000000] s3c24xx_register_clock: new clock lcd, id -1, dev (null) uses same enable bit as sclk_fimd, id -1, dev (null)
- <4>[ 0.000000] s3c24xx_register_clock: new clock mfc, id -1, dev (null) uses same enable bit as sclk_mfc, id -1, dev (null)
- <4>[ 0.000000] s3c24xx_register_clock: new clock iis, id 0, dev (null) uses same enable bit as i2s_v50, id 0, dev (null)
- <7>[ 0.000000] s5pv210_setup_clocks: registering clocks
- <7>[ 0.000000] s5pv210_setup_clocks: clkdiv0 = 14131330, clkdiv1 = 00400400
- <7>[ 0.000000] s5pv210_setup_clocks: xtal is 24000000
- <6>[ 0.000000] S5PV210: PLL settings, A=800000000, M=667000000, E=80000000 V=54000000
- <6>[ 0.000000] S5PV210: ARMCLK=800000000, HCLKM=200000000, HCLKD=166750000
- <6>[ 0.000000] HCLKP=133400000, PCLKM=100000000, PCLKD=83375000, PCLKP=66700000
- <6>[ 0.000000] sclk_dmc: source is mout_mpll (1), rate is 166750000
- <6>[ 0.000000] sclk_onenand: source is hclk_dsys (1), rate is 83375000
- <6>[ 0.000000] sclk: source is mout_mpll (6), rate is 133400000
- <6>[ 0.000000] sclk: source is mout_mpll (6), rate is 66700000
- <6>[ 0.000000] sclk: source is mout_mpll (6), rate is 66700000
- <6>[ 0.000000] sclk: source is mout_mpll (6), rate is 66700000
- <6>[ 0.000000] sclk_mixer: source is sclk_dac (0), rate is 54000000
- <6>[ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
- <6>[ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
- <6>[ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
- <6>[ 0.000000] sclk_cam: source is xusbxti (1), rate is 24000000
- <6>[ 0.000000] sclk_cam: source is ext_xtal (0), rate is 24000000
- <6>[ 0.000000] sclk_fimd: source is mout_mpll (6), rate is 133400000
- <6>[ 0.000000] sclk_mmc: source is mout_mpll (6), rate is 51307692
- <6>[ 0.000000] sclk_mmc: source is mout_mpll (6), rate is 47642857
- <6>[ 0.000000] sclk_mmc: source is mout_mpll (6), rate is 47642857
- <6>[ 0.000000] sclk_mmc: source is mout_mpll (6), rate is 47642857
- <6>[ 0.000000] sclk_mfc: source is sclk_a2m (0), rate is 200000000
- <6>[ 0.000000] sclk_fimg2d: source is sclk_a2m (0), rate is 200000000
- <6>[ 0.000000] sclk: source is mout_mpll (1), rate is 66700000
- <6>[ 0.000000] sclk_csis: source is ext_xtal (0), rate is 24000000
- <6>[ 0.000000] sclk_spi: source is mout_epll (7), rate is 80000000
- <6>[ 0.000000] sclk_spi: source is mout_epll (7), rate is 80000000
- <6>[ 0.000000] sclk_pwi: source is ext_xtal (0), rate is 24000000
- <6>[ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
- <6>[ 0.000000] sclk_mdnie: source is mout_mpll (6), rate is 166750000
- <6>[ 0.000000] sclk_mdnie_pwm: source is ext_xtal (0), rate is 24000000
- <6>[ 0.000000] s5p: 11534336 bytes system memory reserved for mfc at 0x24900000, 0-bank base(0x24900000)
- <6>[ 0.000000] s5p: 11534336 bytes system memory reserved for mfc at 0x4f3f4000, 1-bank base(0x4f3f4000)
- <6>[ 0.000000] s5p: 6291456 bytes system memory reserved for fimc0 at 0x4edf4000, 1-bank base(0x4edf4000)
- <6>[ 0.000000] s5p: 6291456 bytes system memory reserved for fimc2 at 0x4e7f4000, 1-bank base(0x4e7f4000)
- <6>[ 0.000000] s5p: 937984 bytes system memory reserved for jpeg at 0x24900000, 0-bank base(0x24900000)
- <6>[ 0.000000] s5p: 7680000 bytes system memory reserved for fimd at 0x4e0a1000, 1-bank base(0x4e0a1000)
- <7>[ 0.000000] On node 0 totalpages: 76205
- <7>[ 0.000000] Normal zone: 1534 pages used for memmap
- <7>[ 0.000000] Normal zone: 0 pages reserved
- <7>[ 0.000000] Normal zone: 74671 pages, LIFO batch:15
- <7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- <7>[ 0.000000] pcpu-alloc: [0] 0
- <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 74671
- <5>[ 0.000000] Kernel command line: init=/init recovery
- <6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- <6>[ 0.000000] Memory: 73MB 224MB 0MB = 297MB total
- <5>[ 0.000000] Memory: 283528k/325844k available, 21292k reserved, 0K highmem
- <5>[ 0.000000] Virtual kernel memory layout:
- <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- <5>[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
- <5>[ 0.000000] vmalloc : 0xf0000000 - 0x4227858432 ( 192 MB)
- <5>[ 0.000000] lowmem : 0xc0000000 - 0xeff00000 ( 767 MB)
- <5>[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
- <5>[ 0.000000] .init : 0xc0008000 - 0xc074e000 (7448 kB)
- <5>[ 0.000000] .text : 0xc074e000 - 0xc0fda000 (8752 kB)
- <5>[ 0.000000] .data : 0xc0fda000 - 0xc103eb28 ( 403 kB)
- <5>[ 0.000000] .bss : 0xc103eb4c - 0xc11a8008 (1446 kB)
- <6>[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- <6>[ 0.000000] Preemptible hierarchical RCU implementation.
- <6>[ 0.000000] NR_IRQS:339
- <6>[ 0.000000] VIC @fc000000: id 0x00041192, vendor 0x41
- <6>[ 0.000000] VIC @fc010000: id 0x00041192, vendor 0x41
- <6>[ 0.000000] VIC @fc020000: id 0x00041192, vendor 0x41
- <6>[ 0.000000] VIC @fc030000: id 0x00041192, vendor 0x41
- <6>[ 0.000000] mult[140737]
- <6>[ 0.000000] max_delta_ns[2937815369]
- <6>[ 0.000000] min_delta_ns[30517]
- <6>[ 0.000000] rate[32768]
- <6>[ 0.000000] HZ[256]
- <6>[ 0.000000] Console: colour dummy device 80x30
- <6>[ 0.000000] console [tty0] enabled
- <6>[ 0.000000] allocated 2097152 bytes of page_cgroup
- <6>[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- <6>[ 0.021365] Calibrating delay loop... 795.12 BogoMIPS (lpj=1554432)
- <6>[ 0.056504] pid_max: default: 32768 minimum: 301
- <6>[ 0.059598] Security Framework initialized
- <6>[ 0.062024] SELinux: Initializing.
- <7>[ 0.065664] SELinux: Starting in permissive mode
- <6>[ 0.069130] Mount-cache hash table entries: 512
- <6>[ 0.072597] Initializing cgroup subsys debug
- <6>[ 0.075976] Initializing cgroup subsys cpuacct
- <6>[ 0.079269] Initializing cgroup subsys memory
- <6>[ 0.082649] Initializing cgroup subsys freezer
- <6>[ 0.086115] CPU: Testing write buffer coherency: ok
- <6>[ 0.093525] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
- <6>[ 0.098318] print_constraints: dummy:
- <6>[ 0.101809] NET: Registered protocol family 16
- <6>[ 0.110657] ram_console: got buffer at 4ff00400, size fec00
- <6>[ 0.114824] ram_console: uncorrectable error in header
- <6>[ 0.120023] ram_console: no valid data in buffer (sig = 0xffffffff)
- <6>[ 0.132554] console [ram-1] enabled
- <6>[ 0.135856] S5PC110 Hardware version : EVT1
- <6>[ 0.137346] HWREV is 0x5
- <4>[ 0.142771] S3C Power Management, Copyright 2004 Simtec Electronics
- <6>[ 0.144937] pmstats at 4ffff000
- <3>[ 0.147147] invalid media device
- <3>[ 0.149313] invalid media device
- <6>[ 0.154401] hw-breakpoint: debug architecture 0x4 unsupported.
- <6>[ 0.158162] S5PV210: Initializing architecture
- <6>[ 0.165856] s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin=divclk, base 0
- <6>[ 0.173292] s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000, tin=divclk, base 8
- <6>[ 0.180865] s3c24xx-pwm s3c24xx-pwm.2: tin at 66700000, tdiv at 66700000, tin=divclk, base 12
- <6>[ 0.188439] s3c24xx-pwm s3c24xx-pwm.3: tin at 66700000, tdiv at 66700000, tin=divclk, base 16
- <6>[ 0.194021] print_constraints: pd_audio_supply: 5000 mV normal
- <6>[ 0.198855] print_constraints: pd_cam_supply: 5000 mV normal
- <6>[ 0.203725] print_constraints: pd_lcd_supply: 5000 mV normal
- <6>[ 0.208526] print_constraints: pd_g3d_supply: 5000 mV normal
- <6>[ 0.213396] print_constraints: pd_mfc_supply: 5000 mV normal
- <6>[ 0.221516] bio: create slab <bio-0> at 0
- <5>[ 0.224896] SCSI subsystem initialized
- <6>[ 0.229445] usbcore: registered new interface driver usbfs
- <6>[ 0.233813] usbcore: registered new interface driver hub
- <6>[ 0.237963] usbcore: registered new device driver usb
- <6>[ 0.243449] i2c-gpio i2c-gpio.4: using pins 247 (SDA) and 246 (SCL)
- <6>[ 0.248865] i2c-gpio i2c-gpio.5: using pins 203 (SDA) and 204 (SCL)
- <3>[ 0.254532] max8998 6-0066: No interrupt base specified, no interrupts
- <3>[ 0.258224] i2:10, buck2_idx:0
- <6>[ 0.263484] print_constraints: VALIVE_1.2V: 1200 mV
- <6>[ 0.267851] print_constraints: VUSB_1.1V: 1100 mV
- <6>[ 0.272600] print_constraints: VADC_3.3V: 3300 mV
- <6>[ 0.276890] print_constraints: VTF_2.8V: 2800 mV
- <6>[ 0.281188] print_constraints: VLCD_1.8V: 1800 mV
- <6>[ 0.285486] print_constraints: VUSB_3.3V: 3300 mV
- <6>[ 0.290547] print_constraints: VCC_2.8V_PDA: 2800 mV
- <6>[ 0.295036] print_constraints: CAM_AF_2.8V: 2800 mV
- <6>[ 0.299923] print_constraints: CAM_SENSOR_1.2V: 1200 mV
- <6>[ 0.304845] print_constraints: CAM_SENSOR_A2.8V: 2800 mV
- <6>[ 0.309473] print_constraints: CAM_ISP_1.8V: 1800 mV
- <6>[ 0.314481] print_constraints: CAM_ISP_HOST_2.8V: 2800 mV
- <6>[ 0.319204] print_constraints: VGA_DVDD_1.8V: 1800 mV
- <6>[ 0.325417] print_constraints: VCC_3.0V_LCD: 2800 <--> 3000 mV at 3000 mV
- <6>[ 0.331163] print_constraints: VDD_ARM: 750 <--> 1500 mV at 1200 mV
- <6>[ 0.336882] print_constraints: VDD_INT: 750 <--> 1500 mV at 1100 mV
- <6>[ 0.341423] print_constraints: VCC_1.8V: 1800 mV
- <6>[ 0.346232] print_constraints: CAM_ISP_CORE_1.2V: 1200 mV
- <6>[ 0.350080] print_constraints: USB_VBUS_AP:
- <6>[ 0.353416] print_constraints: USB_VBUS_CP:
- <6>[ 0.358797] i2c-gpio i2c-gpio.6: using pins 206 (SDA) and 209 (SCL)
- <6>[ 0.364222] i2c-gpio i2c-gpio.7: using pins 201 (SDA) and 202 (SCL)
- <6>[ 0.369396] i2c-gpio i2c-gpio.8: using pins 42 (SDA) and 43 (SCL)
- <6>[ 0.374699] i2c-gpio i2c-gpio.11: using pins 114 (SDA) and 98 (SCL)
- <6>[ 0.380193] i2c-gpio i2c-gpio.12: using pins 199 (SDA) and 200 (SCL)
- <6>[ 0.384812] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
- <6>[ 0.389344] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
- <6>[ 0.393850] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
- <6>[ 0.399448] Advanced Linux Sound Architecture Driver Version 1.0.24.
- <6>[ 0.402403] Bluetooth: Core ver 2.16
- <6>[ 0.405852] NET: Registered protocol family 31
- <6>[ 0.411216] Bluetooth: HCI device and connection manager initialized
- <6>[ 0.415046] Bluetooth: HCI socket layer initialized
- <6>[ 0.419110] Bluetooth: L2CAP socket layer initialized
- <6>[ 0.422958] Bluetooth: SCO socket layer initialized
- <6>[ 0.427872] Switching to clocksource clock_source_systimer
- <6>[ 0.433218] cfg80211: Calling CRDA to update world regulatory domain
- <6>[ 0.439909] Switched to NOHz mode on CPU #0
- <6>[ 0.453419] NET: Registered protocol family 2
- <6>[ 0.459605] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
- <6>[ 0.466356] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- <6>[ 0.472162] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
- <6>[ 0.477794] TCP: Hash tables configured (established 16384 bind 16384)
- <6>[ 0.479961] TCP reno registered
- <6>[ 0.484735] UDP hash table entries: 256 (order: 0, 4096 bytes)
- <6>[ 0.490030] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- <6>[ 0.493609] NET: Registered protocol family 1
- <6>[ 0.539999] PMU: registered new PMU device of type 0
- <4>[ 0.548039] clk_get: could not find clock emu_src_ck for dev s5pv210_etb_device+0x0/0x100 (etb)
- <6>[ 0.709368] wake enabled for irq 165
- <6>[ 0.712079] wake disabled for irq 165
- <6>[ 0.717088] S5PV210 ADC driver, (c) 2010 Samsung Electronics
- <6>[ 0.721300] Loaded driver for PL330 DMAC-0 s3c-pl330
- <6>[ 0.726360] DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32
- <6>[ 0.730424] Loaded driver for PL330 DMAC-1 s3c-pl330
- <6>[ 0.735485] DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- <6>[ 0.739541] Loaded driver for PL330 DMAC-2 s3c-pl330
- <6>[ 0.744593] DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- <6>[ 0.749194] audit: initializing netlink socket (disabled)
- <5>[ 0.752903] type=2000 audit(0.691:1): initialized
- <6>[ 0.755815] ashmem: initialized
- <6>[ 0.766830] ROMFS MTD (C) 2007 Red Hat, Inc.
- <6>[ 0.769879] fuse init (API version 7.16)
- <7>[ 0.775191] yaffs: yaffs built Jan 25 2014 18:34:42 Installing.
- <6>[ 0.777956] msgmni has been set to 553
- <7>[ 0.781751] SELinux: Registering netfilter hooks
- <6>[ 0.785928] io scheduler noop registered
- <6>[ 0.789177] io scheduler deadline registered
- <6>[ 0.792991] io scheduler cfq registered (default)
- <4>[ 0.795929] MDNIE INIT ..........
- <6>[ 0.800417] S3C MDNIE Driver, (c) 2010 Samsung Electronics
- <4>[ 0.803840] MDNIE INIT SUCCESS Addr : 0xf003c000
- <4>[ 0.805954] IELCD INIT ..........
- <6>[ 0.810452] S3C IELCD Driver, (c) 2010 Samsung Electronics
- <4>[ 0.813857] IELCD INIT SUCCESS Addr : 0xf0040000
- <6>[ 0.820521] s3cfb s3cfb: [fb2] dma: 0x4e506000, cpu: 0xf0400000, size: 0x002ee000
- <6>[ 0.826016] FIMD src sclk = 166750000
- <6>[ 0.830885] s3cfb s3cfb: pixclock adjusted from 38747 to 41979
- <6>[ 0.836197] [mDNIe] mDNIe_tuning_initialize: addr(0x84), data(0x0)
- <6>[ 0.841570] [mDNIe] mDNIe_tuning_initialize: addr(0x90), data(0x0)
- <6>[ 0.847055] [mDNIe] mDNIe_tuning_initialize: addr(0x94), data(0xfff)
- <6>[ 0.852515] [mDNIe] mDNIe_tuning_initialize: addr(0x98), data(0x5c)
- <6>[ 0.857931] [mDNIe] mDNIe_tuning_initialize: addr(0x9c), data(0x10)
- <6>[ 0.863304] [mDNIe] mDNIe_tuning_initialize: addr(0xac), data(0x0)
- <6>[ 0.868850] [mDNIe] mDNIe_tuning_initialize: addr(0xb4), data(0x3ff)
- <4>[ 0.875721] [mDNIe] mDNIe_Set_Mode: current_mDNIe_UI(6), current_mDNIe_OutDoor_OnOff(0)
- <6>[ 0.879404] s3cfb s3cfb: registered successfully
- <6>[ 0.886884] s5pv210-uart.0: s3c2410_serial0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10
- <6>[ 0.905428] s5pv210-uart.1: s3c2410_serial1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10
- <6>[ 0.921069] s5pv210-uart.3: s3c2410_serial3 at MMIO 0xe2900c00 (irq = 28) is a S3C6400/10
- <4>[ 0.935569] PA FB = 0x4E506000, bits per pixel = 32
- <4>[ 0.940714] screen width=480 height=800 va=0xee506000 pa=0x4e506000
- <4>[ 0.946546] xres_virtual = 480, yres_virtual = 1600, xoffset = 0, yoffset = 0
- <4>[ 0.948114] fb_size=3072000
- <4>[ 0.953669] Back frameBuffer[0].VAddr=ee67d000 PAddr=4e67d000 size=1536000
- <4>[ 0.956710] No space for NV12 video carveout
- <6>[ 0.962474] brd: module loaded
- <6>[ 0.966607] loop: module loaded
- <6>[ 0.971789] Android kernel panic handler initialized (bind=kpanic)
- <6>[ 0.981373] sec_jack_probe : Registering jack driver
- <6>[ 0.984120] wake enabled for irq 38
- <6>[ 0.987951] wake enabled for irq 167
- <6>[ 0.991937] fsa9480 7-0025: dev1: 0x4, dev2: 0x0
- <4>[ 0.997171] i2c-core: driver [fsa9480] using legacy suspend method
- <4>[ 1.002223] i2c-core: driver [fsa9480] using legacy resume method
- <6>[ 1.004823] modem_io_init done
- <6>[ 1.009970] [MODEM] bp_irq() - PHONE_ACTIVE interrupt, 1 occurence
- <6>[ 1.012509] wake enabled for irq 47
- <6>[ 1.014953] wake enabled for irq 43
- <6>[ 1.016712] modemctl probed
- <6>[ 1.021157] fsynccontrol_init misc_register(fsynccontrol)
- <6>[ 1.025517] Muxed OneNAND 512MB 1.8V 16-bit (0x50)
- <6>[ 1.028073] OneNAND version = 0x013e
- <7>[ 1.031097] Chip support all block unlock
- <7>[ 1.033454] Chip has 4KiB pagesize
- <7>[ 1.036487] Chip has cache program feature
- <6>[ 1.039615] Scanning device for bad blocks
- <6>[ 3.423756] OneNAND eraseblock 2047 is an initial bad block
- <5>[ 3.427665] Creating 11 MTD partitions on "(null)":
- <5>[ 3.431685] 0x00001f000000-0x00001f500000 : "nv_data"
- <5>[ 3.436356] 0x000000400000-0x000009800000 : "fw_block"
- <5>[ 3.440845] 0x000000400000-0x000000600000 : "dbl"
- <5>[ 3.445161] 0x000000600000-0x000001380000 : "amss"
- <5>[ 3.449520] 0x000001300000-0x000003600000 : "apps"
- <5>[ 3.453957] 0x000003600000-0x000007700000 : "rsrc1"
- <5>[ 3.458324] 0x000007700000-0x000009500000 : "csc"
- <5>[ 3.462683] 0x000009500000-0x000009800000 : "fota"
- <5>[ 3.467007] 0x000009800000-0x000018f00000 : "stl1"
- <5>[ 3.471808] 0x000018f00000-0x00001ec00000 : "stl2"
- <5>[ 3.476522] 0x00001ec00000-0x00001f000000 : "secdata"
- <6>[ 3.479919] lg4573 spi3.0: LCDTYPE=3
- <3>[ 3.483489] lg4573 spi3.0: got pwm for backlight
- <3>[ 3.485482] ldi_class create
- <6>[ 3.718147] PPP generic driver version 2.4.2
- <6>[ 3.722271] PPP Deflate Compression module registered
- <6>[ 3.726015] PPP BSD Compression module registered
- <6>[ 3.730383] PPP MPPE Compression module registered
- <6>[ 3.733840] NET: Registered protocol family 24
- <6>[ 3.739196] tun: Universal TUN/TAP device driver, 1.6
- <6>[ 3.744351] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- <6>[ 3.755869] s3c-udc : S3C HS USB Device Controller Driver, (c) 2008-2009 Samsung Electronics
- <6>[ 3.755877] s3c-udc : version 15 March 2009 (DMA Mode)
- <6>[ 3.762870] android_usb gadget: Mass Storage Function, version: 2009/09/11
- <6>[ 3.766535] android_usb gadget: Number of LUNs=1
- <6>[ 3.770374] lun0: LUN: removable file: (no medium)
- <6>[ 3.774248] android_usb gadget: android_usb ready
- <6>[ 3.791762] android_work: did not send uevent (0 0 (null))
- <7>[ 3.796562] Registered gadget driver 'android_usb'
- <6>[ 3.802741] input: gpio-keys as /devices/platform/gpio-keys.0/input/input0
- <6>[ 3.809803] input: s5pv210-keypad as /devices/platform/s5pv210-keypad/input/input1
- <6>[ 3.814517] usbcore: registered new interface driver xpad
- <6>[ 3.819457] usbcore: registered new interface driver usb_acecad
- <6>[ 3.823642] acecad: v3.2:USB Acecad Flair tablet driver
- <6>[ 3.828209] usbcore: registered new interface driver aiptek
- <6>[ 3.835150] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
- <6>[ 3.841571] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
- <6>[ 3.845974] usbcore: registered new interface driver gtco
- <4>[ 3.849015] GTCO usb driver version: 2.00.0006
- <6>[ 3.853669] usbcore: registered new interface driver hanwang
- <6>[ 3.858296] usbcore: registered new interface driver kbtab
- <6>[ 3.863001] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
- <6>[ 3.867551] usbcore: registered new interface driver wacom
- <6>[ 3.871130] wacom: v1.52:USB Wacom tablet driver
- <6>[ 3.876607] input: mxt224_ts_input as /devices/virtual/input/input2
- <6>[ 3.924415] Atmel MXT224 2-004a: family = 0x80, variant = 0x1, version = 0x16, build = 171
- <6>[ 4.003039] bma023 5-0038: bma023 found
- <6>[ 4.007545] bma023 5-0038: al_version=2, ml_version=1
- <6>[ 4.037719] input: accelerometer_sensor as /devices/virtual/input/input3
- <6>[ 4.043699] input: orientation_sensor as /devices/virtual/input/input4
- <6>[ 4.049123] max8998-rtc max8998-rtc: RTC CHIP NAME: max8998-rtc
- <4>[ 4.053300] S3C24XX RTC, (c) 2004,2006 Simtec Electronics
- <6>[ 4.058620] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
- <6>[ 4.063109] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
- <6>[ 4.067632] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
- <6>[ 4.072078] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
- <6>[ 4.075484] using rtc device, s3c, for alarms
- <6>[ 4.080562] s3c-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
- <6>[ 4.083214] i2c /dev entries driver
- <6>[ 4.089471] lirc_dev: IR Remote Control driver registered, major 251
- <6>[ 4.093040] IR NEC protocol handler initialized
- <6>[ 4.096784] IR RC5(x) protocol handler initialized
- <6>[ 4.100276] IR RC6 protocol handler initialized
- <6>[ 4.103829] IR JVC protocol handler initialized
- <6>[ 4.107399] IR Sony protocol handler initialized
- <6>[ 4.111983] IR RC5 (streamzap) protocol handler initialized
- <6>[ 4.115380] IR LIRC bridge handler initialized
- <6>[ 4.118951] Linux video capture interface: v2.00
- <6>[ 4.125034] mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics
- <6>[ 4.125041]
- <6>[ 4.129887] S3C JPEG Driver, (c) 2007 Samsung Electronics
- <6>[ 4.133492] JPEG driver for S5PV210
- <6>[ 4.138033] device-mapper: uevent: version 1.0.3
- <6>[ 4.145763] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
- <6>[ 4.149367] Bluetooth: HCI UART driver ver 2.2
- <6>[ 4.153128] Bluetooth: HCI H4 protocol initialized
- <6>[ 4.156248] cpuidle: using governor ladder
- <6>[ 4.159263] cpuidle: using governor menu
- <6>[ 4.164411] sdhci: Secure Digital Host Controller Interface driver
- <6>[ 4.167799] sdhci: Copyright(c) Pierre Ossman
- <6>[ 4.173458] s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133400000 Hz)
- <6>[ 4.179290] s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (51307692 Hz)
- <6>[ 4.185850] mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
- <6>[ 4.191552] s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133400000 Hz)
- <6>[ 4.197314] s3c-sdhci s3c-sdhci.1: clock source 2: sclk_mmc (47642857 Hz)
- <6>[ 4.204542] mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
- <6>[ 4.210235] s3c-sdhci s3c-sdhci.2: clock source 0: hsmmc (133400000 Hz)
- <6>[ 4.215998] s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (47642857 Hz)
- <6>[ 4.222228] mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
- <6>[ 4.231977] usbcore: registered new interface driver usbhid
- <6>[ 4.234863] usbhid: USB HID core driver
- <6>[ 4.238676] logger: created 256K log 'log_main'
- <6>[ 4.242515] logger: created 256K log 'log_events'
- <6>[ 4.246180] logger: created 256K log 'log_radio'
- <6>[ 4.249941] logger: created 256K log 'log_system'
- <6>[ 4.254802] zram: num_devices not specified. Using default: 1
- <6>[ 4.257714] zram: Creating 1 devices ...
- <6>[ 4.262550] WM8994 Audio Codec 0.1
- <4>[ 4.281874] wm8994_extensions: initializing driver v10
- <6>[ 4.295237] s3c_idma_preallocate_buffer: VA-f00c0000 PA-C0000000 163840bytes
- <6>[ 4.300228] asoc: WM8994 PAIFRX <-> samsung-i2s.0 mapping ok
- <6>[ 4.302611] ALSA device list:
- <6>[ 4.304266] #0: smdkc110
- <6>[ 4.307039] oprofile: using arm/armv7
- <6>[ 4.309752] GACT probability NOT on
- <6>[ 4.312455] Mirror/redirect action on
- <6>[ 4.314145] u32 classifier
- <6>[ 4.316502] Actions configured
- <6>[ 4.320228] Netfilter messages via NETLINK v0.30.
- <6>[ 4.325263] nf_conntrack version 0.5.0 (4430 buckets, 17720 max)
- <6>[ 4.330350] ctnetlink v0.93: registering with nfnetlink.
- <6>[ 4.336346] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- <6>[ 4.341225] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- <6>[ 4.344883] xt_time: kernel timezone is -0000
- <6>[ 4.350714] ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 4.354484] arp_tables: (C) 2002 David S. Miller
- <6>[ 4.356745] TCP cubic registered
- <6>[ 4.360055] Initializing XFRM netlink socket
- <6>[ 4.364285] NET: Registered protocol family 10
- <6>[ 4.369649] Mobile IPv6
- <6>[ 4.374085] ip6_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 4.377474] IPv6 over IPv4 tunneling driver
- <6>[ 4.385082] NET: Registered protocol family 17
- <6>[ 4.388531] NET: Registered protocol family 15
- <6>[ 4.392482] Bluetooth: RFCOMM TTY layer initialized
- <6>[ 4.396711] Bluetooth: RFCOMM socket layer initialized
- <6>[ 4.399441] Bluetooth: RFCOMM ver 1.11
- <6>[ 4.403713] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- <6>[ 4.408592] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <6>[ 4.412128] NET: Registered protocol family 35
- <6>[ 4.414164] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
- <6>[ 4.422266] ThumbEE CPU extension supported.
- <6>[ 4.426912] s5pv210_cpufreq_init: S5PV210 cpu-freq driver
- <6>[ 4.434537] regulator_init_complete: pd_mfc_supply: disabling
- <6>[ 4.439338] regulator_init_complete: pd_cam_supply: disabling
- <4>[ 4.440776] ## wifi_probe
- <4>[ 4.442578] wifi_set_power = 1
- <4>[ 4.650516] wifi_set_carddetect = 1
- <4>[ 5.162466]
- <4>[ 5.162495] Dongle Host Driver, version 5.90.195.114
- <4>[ 5.162533] Compiled in drivers/net/wireless/bcmdhd on Jan 25 2014 at 18:35:47
- <3>[ 5.871449] mmc0: error -110 whilst initialising MMC card
- <3>[ 7.480855] mmc0: error -110 whilst initialising MMC card
- <3>[ 9.094089] mmc0: error -110 whilst initialising MMC card
- <4>[ 9.162860] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
- <6>[ 9.167191] mmc1: new SDIO card at address 0001
- <4>[ 9.176117] F1 signature read @0x18000000=0x9934329
- <4>[ 9.188088] DHD: dongle ram size is set to 294912(orig 294912)
- <4>[ 9.192204] wl_create_event_handler thr:40 started
- <4>[ 9.194717] dhd_attach thr:41 started
- <4>[ 9.197100] dhd_attach thr:42 started
- <4>[ 9.199544] dhd_attach thr:43 started
- <4>[ 9.208470] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
- <4>[ 9.210307] wifi_set_power = 0
- <4>[ 9.214033] =========== WLAN placed in RESET ========
- <4>[ 9.219570] bcmsdh_sdmmc: probe of mmc1:0001:3 failed with error -110
- <6>[ 9.224016] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
- <6>[ 9.231581] s3c-rtc s3c2410-rtc: setting system clock to 2005-01-01 00:29:42 UTC (1104539382)
- <6>[ 9.235906] FIMC0 registered successfully
- <6>[ 9.240108] FIMC1 registered successfully
- <6>[ 9.245290] FIMC2 registered successfully
- <6>[ 9.250472] max8998_charger_probe : MAX8998 Charger Driver Loading
- <6>[ 9.256919] max8998_charger_probe : pmic interrupt registered
- <6>[ 9.265239] check_lpm_charging_mode : lpm_charging_mode(0)
- <6>[ 9.268202] wake enabled for irq 39
- <6>[ 9.271166] max8998_set_cable : status(1)
- <7>[ 9.276729] max8998_charging_control : USB charging enabled
- <7>[ 9.291946] s3c_bat_discharge_reason : Current charge level : 99%
- <7>[ 9.291951] Current time : 9 discharging_time : 21609
- <7>[ 9.291955] discharging reason : 1
- <4>[ 9.296478] Warning: unable to open an initial console.
- <6>[ 9.300257] Freeing init memory: 7448K
- <6>[ 9.306175] s3c_cable_status_update : battery status discharging : 1
- <7>[ 9.314730] max8998_charging_control : charging disabled
- <7>[ 9.329592] s3c_bat_discharge_reason : Current charge level : 99%
- <7>[ 9.329598] Current time : 9 discharging_time : 0
- <7>[ 9.329602] discharging reason : 1
- <6>[ 9.336368] mmc2: new high speed SD card at address 0260
- <6>[ 9.342520] mmcblk0: mmc2:0260 1232 1.87 GiB
- <6>[ 9.350960] s3c_cable_status_update : battery status discharging : 1
- <6>[ 9.352649] mmcblk0: p1
- <7>[ 9.360059] max8998_charging_control : charging disabled
- <6>[ 9.387019] Adding 322264k swap on /dev/block/zram0. Priority:-1 extents:1 across:322264k SS
- <6>[ 9.403847] fsynccontrol_status_write: FSYNCCONTROL fsync disabled
- <6>[ 9.409748] dyn_fsync_active_store: dynamic fsync enabled
- <7>[ 9.434334] SELinux: 512 avtab hash slots, 1430 rules.
- <7>[ 9.439314] SELinux: 512 avtab hash slots, 1430 rules.
- <7>[ 9.443595] SELinux: 1 users, 2 roles, 305 types, 1 bools, 1 sens, 1024 cats
- <7>[ 9.448690] SELinux: 84 classes, 1430 rules
- <7>[ 9.453648] SELinux: Completing initialization.
- <7>[ 9.457807] SELinux: Setting up existing superblocks.
- <7>[ 9.463899] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- <7>[ 9.470216] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
- <7>[ 9.476984] SELinux: initialized (dev bdev, type bdev), not configured for labeling
- <7>[ 9.482963] SELinux: initialized (dev proc, type proc), uses genfs_contexts
- <7>[ 9.489203] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 9.495650] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
- <7>[ 9.502444] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
- <7>[ 9.508345] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
- <7>[ 9.516335] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
- <7>[ 9.522747] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
- <7>[ 9.529593] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
- <7>[ 9.537435] SELinux: initialized (dev mtd_inodefs, type mtd_inodefs), not configured for labeling
- <7>[ 9.543666] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 9.549819] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- <5>[ 9.627543] type=1403 audit(1104539382.890:2): policy loaded auid=4294967295 ses=4294967295
- <4>[ 9.631207] SELinux: Loaded policy from /sepolicy
- <5>[ 9.643418] type=1404 audit(1104539382.906:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
- <3>[ 11.019857] init: invalid gid 'qcom_diag'
- <3>[ 11.149425] init: /dev/hw_random not found
- <3>[ 11.152976] init: cannot open '/initlogo.rle'
- <7>[ 11.160377] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 11.167639] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 11.174277] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <3>[ 11.178592] android_usb: already disabled
- <3>[ 11.182266] init: /dev/hw_random not found
- <3>[ 11.189216] init: Unable to open persistent property directory /data/property errno: 2
- <3>[ 11.196261] EXT4-fs (mmcblk0p1): VFS: Can't find ext4 filesystem
- <3>[ 11.212260] fs_mgr: Cannot open file /etc/extra.fstab
- <3>[ 11.221341] init: cannot execve('/system/bin/rild'): Permission denied
- <6>[ 11.239851] adb_open
- <6>[ 11.241651] adb_bind_config
- <6>[ 11.252295] android_work: did not send uevent (0 0 (null))
- <6>[ 11.262512] adb_bind_config
- <6>[ 11.266073] adb_release
- <6>[ 11.273568] android_work: did not send uevent (0 0 (null))
- <6>[ 11.287833] adb_open
- <6>[ 11.289573] adb_bind_config
- <6>[ 11.309185] android_work: did not send uevent (0 0 (null))
- <3>[ 11.406778] fs_mgr: Cannot open file /etc/extra.fstab
- <3>[ 11.416388] EXT4-fs (mmcblk0p1): VFS: Can't find ext4 filesystem
- <3>[ 11.432340] EXT4-fs (mmcblk0p1): VFS: Can't find ext4 filesystem
- <6>[ 11.471216] android_work: sent uevent USB_STATE=CONNECTED
- <3>[ 11.485168] EXT4-fs (mmcblk0p1): VFS: Can't find ext4 filesystem
- <3>[ 11.501969] EXT4-fs (mmcblk0p1): VFS: Can't find ext4 filesystem
- <3>[ 11.517506] EXT4-fs (mmcblk0p1): VFS: Can't find ext4 filesystem
- <6>[ 11.541009] android_usb gadget: high speed config #1: android
- <6>[ 11.545617] android_work: sent uevent USB_STATE=CONFIGURED
- <3>[ 11.567440] EXT4-fs (mmcblk0p1): VFS: Can't find ext4 filesystem
- <3>[ 11.584024] EXT4-fs (mmcblk0p1): VFS: Can't find ext4 filesystem
- <3>[ 11.650612] EXT4-fs (mmcblk0p1): VFS: Can't find ext4 filesystem
- <3>[ 11.716480] EXT4-fs (mmcblk0p1): VFS: Can't find ext4 filesystem
- <3>[ 16.296799] init: cannot execve('/system/bin/rild'): Permission denied
- <3>[ 21.322060] init: cannot execve('/system/bin/rild'): Permission denied
- <4>[ 21.375111] adbd (134): /proc/134/oom_adj is deprecated, please use /proc/134/oom_score_adj instead.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement