Starting Klippy...
Args: ['/home/sronnie/klipper/klippy/klippy.py', '/home/sronnie/printer_data/config/printer.cfg', '-I', '/home/sronnie/printer_data/comms/klippy.serial', '-l', '/home/sronnie/printer_data/logs/klippy.log', '-a', '/home/sronnie/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-198-g33b18fd6'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper
CPU: 4 core ?
Python: '3.9.2 (default, Mar 12 2021, 04:06:34) \n[GCC 10.2.1 20210110]'
Start printer at Fri May 12 07:41:35 2023 (1683891695.7 22.9)
===== Config file =====
[gcode_macro clean_nozzle]
variable_location_bucket_rear = True
variable_enable_purge = True
variable_purge_len = 25
variable_purge_spd = 150
variable_purge_temp_min = 240
variable_purge_ret = 2
variable_ooze_dwell = 2
variable_brush_top = 10
variable_clearance_z = 5
variable_wipe_qty = 3
variable_prep_spd_xy = 3000
variable_prep_spd_z = 1500
variable_wipe_spd_xy = 5000
variable_brush_start = 75
variable_brush_width = 52
variable_brush_front = 0
variable_brush_depth = 0
variable_bucket_left_width = 92
variable_bucket_right_width = 40
variable_bucket_gap = 22
variable_bucket_start = 0
variable_bucket_pos = 1
gcode =

	{% if "xyz" in printer.toolhead.homed_axes %}
	M117 Cleaning Nozzle...


	STATUS_CLEANING


	SAVE_GCODE_STATE NAME=clean_nozzle


	G90


	{% set Ry = printer.configfile.config["stepper_y"]["position_max"]|float %}


	{% if enable_purge %}


	SET_GCODE_VARIABLE MACRO=clean_nozzle VARIABLE=bucket_pos VALUE={(range(2) | random)}


	G1 Z{brush_top + clearance_z} F{prep_spd_z}


	{% if location_bucket_rear %}
	G1 Y{Ry} F{prep_spd_xy}
	{% else %}
	G1 Y{brush_front + (brush_depth / 2)} F{prep_spd_xy}
	{% endif %}


	G1 X{bucket_start + (bucket_left_width / (2 - bucket_pos)) + (bucket_pos * bucket_gap) + (bucket_pos * (bucket_right_width / 2))}



	{% if printer.extruder.temperature >= purge_temp_min %}
	M83
	G1 E{purge_len} F{purge_spd}
	G1 E-{purge_ret} F{purge_spd * 5}
	G4 P{ooze_dwell * 1000}
	G92 E0
	{% endif %}

	{% endif %}


	G1 Z{brush_top + clearance_z} F{prep_spd_z}
	G1 X{brush_start + (brush_width * bucket_pos)} F{prep_spd_xy}


	{% if location_bucket_rear %}
	G1 Y{Ry}
	{% else %}
	G1 Y{brush_front + (brush_depth / 2)}
	{% endif %}


	G1 Z{brush_top} F{prep_spd_z}


	{% for wipes in range(1, (wipe_qty + 1)) %}
	G1 X{brush_start + (brush_width * (1 - bucket_pos))} F{wipe_spd_xy}
	G1 X{brush_start + (brush_width * bucket_pos)} F{wipe_spd_xy}
	{% endfor %}


	M117 Nozzle Cleaned...
	G1 Z{brush_top + clearance_z} F{prep_spd_z}
	G1 X{bucket_start + (bucket_left_width / 4)} F{prep_spd_xy}


	RESTORE_GCODE_STATE NAME=clean_nozzle

	{% else %}


	{ action_raise_error("Please home your axes!") }
	M117 Please home first!

	{% endif %}

[neopixel sb_leds]
pin = PB6
chain_count = 3
color_order = GRBW
initial_red = 0.5
initial_green = 0.5
initial_blue = 0.5
initial_white = 0.5

[gcode_macro _sb_vars]
variable_colors = {
	'logo': {
	'busy': {'r': 0.4, 'g': 0.0, 'b': 0.0, 'w': 0.0},
	'cleaning': {'r': 0.0, 'g': 0.02, 'b': 0.5, 'w': 0.0},
	'calibrating_z': {'r': 0.8, 'g': 0., 'b': 0.35, 'w': 0.0},
	'heating': {'r': 0.3, 'g': 0.18, 'b': 0.0, 'w': 0.0},
	'homing': {'r': 0.0, 'g': 0.6, 'b': 0.2, 'w': 0.0},
	'leveling': {'r': 0.5, 'g': 0.1, 'b': 0.4, 'w': 0.0},
	'meshing': {'r': 0.2, 'g': 1.0, 'b': 0.0, 'w': 0.0},
	'off': {'r': 0.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
	'printing': {'r': 1.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
	'standby': {'r': 0.01, 'g': 0.01, 'b': 0.01, 'w': 0.1},
	},
	'nozzle': {
	'heating': {'r': 0.8, 'g': 0.35, 'b': 0.0, 'w':0.0},
	'off': {'r': 0.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
	'on': {'r': 0.8, 'g': 0.8, 'b': 0.8, 'w':1.0},
	'standby': {'r': 0.6, 'g': 0.0, 'b': 0.0, 'w':0.0},
	},
	'thermal': {
	'hot': {'r': 1.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
	'cold': {'r': 0.3, 'g': 0.0, 'b': 0.3, 'w': 0.0}
	}
	}
variable_logo_led_name = "sb_leds"
variable_logo_idx = "1"
variable_nozzle_led_name = "sb_leds"
variable_nozzle_idx = "2,3"
variable_thermal_config = {
	'extruder': {
	'cool_temp': 40,
	'leds': 'logo',
	},
	'heater_bed': {
	'cool_temp': 40,
	'leds': 'nozzle',
	},
	}
gcode =

[gcode_macro _set_sb_leds]
gcode =
	{% set red = params.RED|default(0)|float %}
	{% set green = params.GREEN|default(0)|float %}
	{% set blue = params.BLUE|default(0)|float %}
	{% set white = params.WHITE|default(0)|float %}
	{% set led = params.LED|string %}
	{% set idx = (params.IDX|string).split(',') %}
	{% set transmit_last = params.TRANSMIT|default(1) %}

	{% for led_index in idx %}
	{% set transmit=transmit_last if loop.last else 0 %}
	set_led led={led} red={red} green={green} blue={blue} white={white} index={led_index} transmit={transmit}
	{% endfor %}

[gcode_macro _set_sb_leds_by_name]
gcode =
	{% set leds_name = params.LEDS %}
	{% set color_name = params.COLOR %}
	{% set color = printer["gcode_macro _sb_vars"].colors[leds_name][color_name] %}
	{% set led = printer["gcode_macro _sb_vars"][leds_name + "_led_name"] %}
	{% set idx = printer["gcode_macro _sb_vars"][leds_name + "_idx"] %}
	{% set transmit = params.TRANSMIT|default(1) %}

	_set_sb_leds led={led} red={color.r} green={color.g} blue={color.b} white={color.w} idx="{idx}" transmit={transmit}

[gcode_macro _set_logo_leds]
gcode =
	{% set red = params.RED|default(0)|float %}
	{% set green = params.GREEN|default(0)|float %}
	{% set blue = params.BLUE|default(0)|float %}
	{% set white = params.WHITE|default(0)|float %}
	{% set led = printer["gcode_macro _sb_vars"].logo_led_name %}
	{% set idx = printer["gcode_macro _sb_vars"].logo_idx %}
	{% set transmit=params.TRANSMIT|default(1) %}

	_set_sb_leds led={led} red={red} green={green} blue={blue} white={white} idx="{idx}" transmit={transmit}

[gcode_macro _set_nozzle_leds]
gcode =
	{% set red = params.RED|default(0)|float %}
	{% set green = params.GREEN|default(0)|float %}
	{% set blue = params.BLUE|default(0)|float %}
	{% set white = params.WHITE|default(0)|float %}
	{% set led = printer["gcode_macro _sb_vars"].nozzle_led_name %}
	{% set idx = printer["gcode_macro _sb_vars"].nozzle_idx %}
	{% set transmit=params.TRANSMIT|default(1) %}

	_set_sb_leds led={led} red={red} green={green} blue={blue} white={white} idx="{idx}" transmit={transmit}

[gcode_macro set_logo_leds_off]
gcode =
	{% set transmit=params.TRANSMIT|default(1) %}
	_set_logo_leds red=0 blue=0 green=0 white=0 transmit={transmit}

[gcode_macro set_nozzle_leds_on]
gcode =
	{% set transmit=params.TRANSMIT|default(1) %}
	_set_sb_leds_by_name leds="nozzle" color="on" transmit={transmit}

[gcode_macro set_nozzle_leds_off]
gcode =
	{% set transmit=params.TRANSMIT|default(1) %}
	_set_sb_leds_by_name leds="nozzle" color="off" transmit={transmit}

[gcode_macro status_off]
gcode =
	set_logo_leds_off transmit=0
	set_nozzle_leds_off

[gcode_macro status_ready]
gcode =
	_set_sb_leds_by_name leds="logo" color="standby" transmit=0
	_set_sb_leds_by_name leds="nozzle" color="standby" transmit=1

[gcode_macro status_busy]
gcode =
	_set_sb_leds_by_name leds="logo" color="busy" transmit=0
	set_nozzle_leds_on

[gcode_macro status_heating]
gcode =
	_set_sb_leds_by_name leds="logo" color="heating" transmit=0
	_set_sb_leds_by_name leds="nozzle" color="heating" transmit=1

[gcode_macro status_leveling]
gcode =
	_set_sb_leds_by_name leds="logo" color="leveling" transmit=0
	set_nozzle_leds_on

[gcode_macro status_homing]
gcode =
	_set_sb_leds_by_name leds="logo" color="homing" transmit=0
	set_nozzle_leds_on

[gcode_macro status_cleaning]
gcode =
	_set_sb_leds_by_name leds="logo" color="cleaning" transmit=0
	set_nozzle_leds_on

[gcode_macro status_meshing]
gcode =
	_set_sb_leds_by_name leds="logo" color="meshing" transmit=0
	set_nozzle_leds_on

[gcode_macro status_calibrating_z]
gcode =
	_set_sb_leds_by_name leds="logo" color="calibrating_z" transmit=0
	set_nozzle_leds_on

[gcode_macro status_printing]
gcode =
	_set_sb_leds_by_name leds="logo" color="printing" transmit=0
	set_nozzle_leds_on

[gcode_macro G32]
gcode =
	STATUS_HOMING
	SAVE_GCODE_STATE NAME=STATE_G32
	G90
	M117 Homing X...
	G28 X
	M117 Homing Y...
	G28 Y
	M117 Homing Z...
	G28 Z
	QUAD_GANTRY_LEVEL


	RESTORE_GCODE_STATE NAME=STATE_G32

[gcode_macro PRINT_END]
gcode =

	{% set th = printer.toolhead %}
	{% set x_safe = th.position.x + 20 * (1 if th.axis_maximum.x - th.position.x > 20 else -1) %}
	{% set y_safe = th.position.y + 20 * (1 if th.axis_maximum.y - th.position.y > 20 else -1) %}
	{% set z_safe = [th.position.z + 2, th.axis_maximum.z]|min %}

	SAVE_GCODE_STATE NAME=STATE_PRINT_END
	M400
	G92 E0
	G1 E-10 F1800
	SFS_DISABLE
	TURN_OFF_HEATERS

	G90
	G0 X{x_safe} Y{y_safe} Z{z_safe} F20000
	G0 X{th.axis_maximum.x//2} Y{th.axis_maximum.y - 2} F3600
	M107

	BED_MESH_CLEAR
	RESTORE_GCODE_STATE NAME=STATE_PRINT_END
	STATUS_READY
	SET_TEMPERATURE_LED LED=sb_leds INDEX=1 SENSOR=heater_bed
	M117 Nozzle LED Indicates Bed Temp
	CASE_LIGHT_OFF

[gcode_macro PRINT_START]
gcode =

	{% set target_bed = params.BED|int %}
	{% set target_extruder = params.EXTRUDER|int %}
	{% set target_chamber = params.CHAMBER|default("35")|int %}
	{% set filament_type = params.FIL_TYPE|default("ABS")|int %}
	{% set x_wait = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set y_wait = printer.toolhead.axis_maximum.y|float / 2 %}


	CASE_LIGHT_ON


	STATUS_HOMING
	G28
	G90


	BED_MESH_CLEAR


	{% if params.BED|int > 90 %}
	SET_DISPLAY_TEXT MSG="Bed: {target_bed}C"
	STATUS_HEATING
	M106 S255

	G1 X{x_wait} Y{y_wait} Z15 F9000
	M190 S{target_bed}
	SET_DISPLAY_TEXT MSG="Heatsoak: {target_chamber}C"
	TEMPERATURE_WAIT SENSOR="temperature_sensor chamber" MINIMUM={target_chamber}


	{% else %}
	SET_DISPLAY_TEXT MSG="Bed: {target_bed}C"
	STATUS_HEATING
	G1 X{x_wait} Y{y_wait} Z15 F9000
	M190 S{target_bed}
	SET_DISPLAY_TEXT MSG="Heat Soak for 5min"
	G4 P300000
	{% endif %}


	SET_DISPLAY_TEXT MSG="Hotend: 150C"
	M109 S150


	SET_DISPLAY_TEXT MSG="QGL"
	STATUS_LEVELING
	QUAD_GANTRY_LEVEL
	G28 Z






	SET_DISPLAY_TEXT MSG="Adaptive Bed Mesh"
	STATUS_MESHING
	BED_MESH_CALIBRATE


	SET_DISPLAY_TEXT MSG="Hotend: {target_extruder}C"
	STATUS_HEATING
	G1 X{x_wait} Y{y_wait} Z15 F9000
	M107
	M109 S{target_extruder}


	STATUS_PRINTING
	G0 X{x_wait - 50} Y4 F10000
	G0 Z0.4
	SFS_ENABLE
	SET_DISPLAY_TEXT MSG="Nozzle Priming..."
	VORON_PURGE
	M83
	SET_DISPLAY_TEXT MSG="Printing..."

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
description = Perform Mesh Bed Leveling with klicky automount
gcode =

	{% if display_parameters == True %}
	{ action_respond_info("led_enable  : %d" % (led_enable))  }
	{ action_respond_info("status_macro: \'%s\'" % (status_macro))  }
	{ action_respond_info("fuzz_enable : %d" % (fuzz_enable))  }
	{ action_respond_info("fuzz_min    : %f" % (fuzz_min))  }
	{ action_respond_info("fuzz_max    : %f" % (fuzz_max))  }
	{ action_respond_info("probe_dock_enable: %d" % (probe_dock_enable))  }
	{ action_respond_info("attach_macro: \'%s\'" % (attach_macro))  }
	{ action_respond_info("detach_macro: \'%s\'" % (detach_macro))  }
	{% endif %}

	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}

	{% if margin_enable == False %}
	{% set margin_size = 0 %}
	{% endif %}

	{ action_respond_info("{} object points, clamping to bed mesh [{!r} {!r}]".format(
	all_points | count,
	bed_mesh_min,
	bed_mesh_max,
	)) }

	{% if fuzz_enable == True %}
	{% set fuzz_range = range((fuzz_min * 100) | int, (fuzz_max * 100) | int + 1) %}
	{% set x_min = (bed_mesh_min[0] + fuzz_max - margin_size, x_min) | max - (fuzz_range | random / 100.0) %}
	{% set y_min = (bed_mesh_min[1] + fuzz_max - margin_size, y_min) | max - (fuzz_range | random / 100.0) %}
	{% set x_max = (bed_mesh_max[0] - fuzz_max + margin_size, x_max) | min + (fuzz_range | random / 100.0) %}
	{% set y_max = (bed_mesh_max[1] - fuzz_max + margin_size, y_max) | min + (fuzz_range | random / 100.0) %}
	{% else %}
	{% set x_min = [ bed_mesh_min[0], x_min - margin_size ] | max %}
	{% set y_min = [ bed_mesh_min[1], y_min - margin_size ] | max %}
	{% set x_max = [ bed_mesh_max[0], x_max + margin_size ] | min %}
	{% set y_max = [ bed_mesh_max[1], y_max + margin_size ] | min %}
	{% endif %}

	{ action_respond_info("Object bounds, clamped to the bed_mesh: {!r}, {!r}".format(
	(x_min, y_min),
	(x_max, y_max),
	)) }

	{% set points_x = (((x_max - x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((y_max - y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}

	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	{ action_respond_info( "Algorithm: {}".format(algorithm)) }

	{% set points_x = [points_x, min_points]|max  %}
	{% set points_y = [points_y, min_points]|max  %}
	{ action_respond_info( "Points: x: {}, y: {}".format(points_x, points_y) ) }

	{% if printer.configfile.settings.bed_mesh.relative_reference_index is defined %}
	{% set ref_index = (points_x * points_y / 2) | int %}
	{ action_respond_info( "Reference index: {}".format(ref_index) ) }
	{% else %}
	{% set ref_index = -1 %}
	{% endif %}

	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}

	{% if led_enable == True %}
	{status_macro}
	{% endif %}

	_BED_MESH_CALIBRATE mesh_min={x_min},{y_min} mesh_max={x_max},{y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y} RELATIVE_REFERENCE_INDEX={ref_index}

	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}
variable_led_enable = True
variable_status_macro = 'status_meshing'
variable_fuzz_enable = True
variable_fuzz_min = 0
variable_fuzz_max = 4
variable_margin_enable = False
variable_margin_size = 5
variable_probe_dock_enable = True
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_display_parameters = True

[homing_override]
axes = xyz
gcode =
	{% set home_all = 'X' not in params and 'Y' not in params and 'Z' not in params %}

	{% if home_all or 'X' in params %}
	_HOME_X
	{% endif %}

	{% if home_all or 'Y' in params %}
	_HOME_Y
	{% endif %}

	{% if home_all or 'Z' in params %}
	G90
	G0 X175 Y175 F6000
	G28 Z
	G1 Z10
	{% endif %}

[gcode_macro CASE_LIGHT_ON]
gcode =
	SET_PIN PIN=caselight VALUE=1

[gcode_macro CASE_LIGHT_OFF]
gcode =
	SET_PIN PIN=caselight VALUE=0

[gcode_macro SFS_ENABLE]
description = Enable smart filament sensor
gcode =
	M117 Filament Sensor Enabled...
	G92 E0
	SET_FILAMENT_SENSOR SENSOR=SMART_FIL_SENS ENABLE=1

[gcode_macro SFS_DISABLE]
description = Disable smart filament sensor
gcode =
	M117 Filament Sensor Disabled...
	G92 E0
	SET_FILAMENT_SENSOR SENSOR=SMART_FIL_SENS ENABLE=0

[pause_resume]

[gcode_macro M600]
gcode =
	{% set X = params.X|default(175)|float %}
	{% set Y = params.Y|default(0)|float %}
	{% set Z = params.Z|default(2)|float %}
	SAVE_GCODE_STATE NAME=M600_state
	PAUSE
	M83
	G91
	G1 E-.8 F2700
	G1 Z{Z}
	G90
	G1 X{X} Y{Y} F3000
	G91
	G1 E-75 F1000
	RESTORE_GCODE_STATE NAME=M600_state

[gcode_macro LOAD]
gcode =
	SAVE_GCODE_STATE NAME=LOAD
	G91
	G1 E100 F900
	CLEAN_NOZZLE
	RESTORE_GCODE_STATE NAME=LOAD
	SET_IDLE_TIMEOUT TIMEOUT=7200

[gcode_macro UNPAUSE]
gcode =
	RESTORE_GCODE_STATE NAME=FIRSTMOVE MOVE=1
	RESUME

[gcode_macro DUMP_VARIABLES]
gcode =
	{% set filter_name = params.NAME|default('')|string|lower %}
	{% set filter_value = params.VALUE|default('')|string|lower %}
	{% set show_cfg = params.SHOW_CFG|default(0)|int %}

	{% set out = [] %}

	{% for key1 in printer %}
	{% for key2 in printer[key1] %}
	{% if (show_cfg or not (key1|lower == 'configfile' and key2|lower in ['config', 'settings'])) and (filter_name in key1|lower or filter_name in key2|lower) and filter_value in printer[key1][key2]|string|lower %}
	{% set dummy = out.append("printer['%s'].%s = %s" % (key1, key2, printer[key1][key2])) %}
	{% endif %}
	{% else %}
	{% if filter_name in key1|lower and filter_value in printer[key1]|string|lower %}
	{% set dummy = out.append("printer['%s'] = %s" % (key1, printer[key1])) %}
	{% endif %}
	{% endfor %}
	{% endfor %}

	{action_respond_info(out|join("\n"))}

[filament_motion_sensor SMART_FIL_SENS]
detection_length = 10.00
extruder = extruder
switch_pin = ^PG11
pause_on_runout = True
event_delay = 3.0
pause_delay = 0.5
runout_gcode =
	M117 Runout Detected!

[gcode_macro SET_TEMPERATURE_LED]
description = Set one or more neopixels to track a temperature
gcode =
	{% set sensor = params.SENSOR|default('heater_bed') %}
	{% set cool_temp = params.COOL_TEMP|default(22.0)|float %}
	{% set hot_temp = params.HOT_TEMP|default(100)|float %}
	{% set brightness = params.BRIGHTNESS|default(1.0)|float %}
	{% set led = params.LED %}
	{% set index = params.INDEX %}
	SET_LED_TEMPLATE LED={led}{% if index is defined %} INDEX={index}{% endif %} TEMPLATE=temperature_color param_sensor="'{sensor}'" param_cool_temp={cool_temp} param_hot_temp={hot_temp} param_brightness={brightness}

[gcode_macro CLEAR_TEMPERATURE_LED]
description = Set one or more neopixels to stop tracking a temperature and return to normal operation
gcode =
	{% set led = params.LED %}
	{% set index = params.INDEX %}
	SET_LED_TEMPLATE LED={led}{% if index is defined %} INDEX={index}{% endif %} TEMPLATE=

[display_template temperature_color]
param_cool_temp = 20
param_hot_temp = 110
param_sensor = 'heater_bed'
param_brightness = 1.0
param_gradient = [
	(0.04,0.04,1.00,0.00),
	(0.04,0.04,1.00,0.00),
	(0.04,0.04,1.00,0.00),
	(0.04,0.04,1.00,0.00),
	(0.04,0.04,1.00,0.00),
	(0.05,0.04,1.00,0.00),
	(0.05,0.05,1.00,0.00),
	(0.06,0.06,1.00,0.00),
	(0.07,0.07,1.00,0.00),
	(0.08,0.08,1.00,0.00),
	(0.09,0.10,1.00,0.00),
	(0.11,0.12,1.00,0.00),
	(0.13,0.13,1.00,0.00),
	(0.15,0.15,1.00,0.00),
	(0.16,0.17,0.99,0.00),
	(0.18,0.19,0.99,0.00),
	(0.20,0.21,0.99,0.00),
	(0.23,0.23,0.99,0.00),
	(0.25,0.25,0.98,0.00),
	(0.27,0.27,0.98,0.00),
	(0.29,0.31,0.98,0.00),
	(0.31,0.42,0.96,0.00),
	(0.31,0.50,0.94,0.00),
	(0.31,0.57,0.92,0.00),
	(0.31,0.63,0.89,0.00),
	(0.31,0.69,0.86,0.00),
	(0.31,0.74,0.84,0.00),
	(0.30,0.78,0.80,0.00),
	(0.29,0.82,0.76,0.00),
	(0.27,0.86,0.72,0.00),
	(0.25,0.89,0.66,0.00),
	(0.23,0.93,0.58,0.00),
	(0.20,0.96,0.50,0.00),
	(0.16,0.98,0.41,0.00),
	(0.13,0.99,0.33,0.00),
	(0.09,1.00,0.25,0.00),
	(0.07,1.00,0.14,0.00),
	(0.08,1.00,0.20,0.00),
	(0.07,1.00,0.24,0.00),
	(0.08,1.00,0.25,0.00),
	(0.11,1.00,0.23,0.00),
	(0.10,1.00,0.18,0.00),
	(0.09,1.00,0.14,0.00),
	(0.18,1.00,0.22,0.00),
	(0.27,0.99,0.25,0.00),
	(0.36,0.98,0.28,0.00),
	(0.45,0.97,0.29,0.00),
	(0.53,0.96,0.29,0.00),
	(0.62,0.94,0.27,0.00),
	(0.71,0.92,0.23,0.00),
	(0.79,0.90,0.16,0.00),
	(0.86,0.88,0.10,0.00),
	(0.91,0.86,0.20,0.00),
	(0.95,0.84,0.25,0.00),
	(0.98,0.82,0.27,0.00),
	(0.98,0.82,0.27,0.00),
	(0.98,0.82,0.24,0.00),
	(0.99,0.82,0.16,0.00),
	(1.00,0.82,0.15,0.00),
	(1.00,0.82,0.13,0.00),
	(1.00,0.82,0.10,0.00),
	(1.00,0.83,0.06,0.00),
	(1.00,0.83,0.03,0.00),
	(1.00,0.82,0.09,0.00),
	(1.00,0.81,0.12,0.00),
	(1.00,0.80,0.14,0.00),
	(1.00,0.80,0.16,0.00),
	(1.00,0.78,0.17,0.00),
	(1.00,0.77,0.18,0.00),
	(1.00,0.76,0.18,0.00),
	(1.00,0.75,0.19,0.00),
	(1.00,0.74,0.19,0.00),
	(1.00,0.72,0.20,0.00),
	(1.00,0.71,0.20,0.00),
	(1.00,0.69,0.20,0.00),
	(1.00,0.68,0.20,0.00),
	(1.00,0.66,0.20,0.00),
	(1.00,0.64,0.20,0.00),
	(1.00,0.62,0.19,0.00),
	(1.00,0.60,0.18,0.00),
	(1.00,0.57,0.16,0.00),
	(1.00,0.54,0.15,0.00),
	(1.00,0.51,0.14,0.00),
	(1.00,0.47,0.13,0.00),
	(1.00,0.43,0.11,0.00),
	(1.00,0.39,0.10,0.00),
	(1.00,0.37,0.08,0.00),
	(1.00,0.36,0.06,0.00),
	(1.00,0.33,0.05,0.00),
	(1.00,0.31,0.04,0.00),
	(1.00,0.29,0.02,0.00),
	(1.00,0.27,0.02,0.00),
	(1.00,0.26,0.01,0.00),
	(1.00,0.24,0.01,0.00),
	(1.00,0.22,0.00,0.00),
	(1.00,0.20,0.00,0.00),
	(1.00,0.18,0.00,0.00),
	(1.00,0.16,0.00,0.00),
	(1.00,0.15,0.00,0.00),
	(1.00,0.13,0.00,0.00),
	(1.00,0.11,0.00,0.00),
	(1.00,0.09,0.00,0.00),
	(1.00,0.07,0.00,0.00),
	(1.00,0.05,0.00,0.00),
	(1.00,0.04,0.00,0.00),
	(1.00,0.02,0.00,0.00),
	(1.00,0.01,0.00,0.00),
	(1.00,0.00,0.00,0.00)]
text =
	{% set temp = printer[param_sensor].temperature %}
	{% set steps = param_gradient|length %}
	{% set idx = (((temp - param_cool_temp) / (param_hot_temp - param_cool_temp)) * steps) | int %}
	{% if idx < 0 %}
	{% set idx = 0 %}
	{% elif idx > steps-1 %}
	{% set idx = steps-1 %}
	{% endif %}
	{ param_gradient[idx][0] * param_brightness },{ param_gradient[idx][1] * param_brightness },{ param_gradient[idx][2] * param_brightness },{ param_gradient[idx][3] * param_brightness }

[gcode_macro SETUP_KAMP_MESHING]
gcode =
	SET_GCODE_VARIABLE MACRO=BED_MESH_CALIBRATE VARIABLE=display_parameters   VALUE={params.DISPLAY_PARAMETERS|default(True)|int}
	SET_GCODE_VARIABLE MACRO=BED_MESH_CALIBRATE VARIABLE=led_enable   VALUE={params.LED_ENABLE|default(False)|int}
	SET_GCODE_VARIABLE MACRO=BED_MESH_CALIBRATE VARIABLE=status_macro VALUE='"{params.STATUS_MACRO|default('status_meshing')|string}"'

	SET_GCODE_VARIABLE MACRO=BED_MESH_CALIBRATE VARIABLE=fuzz_enable VALUE={params.FUZZ_ENABLE|default(False)|int}
	SET_GCODE_VARIABLE MACRO=BED_MESH_CALIBRATE VARIABLE=fuzz_min    VALUE={params.FUZZ_MIN|default(0)|float}
	SET_GCODE_VARIABLE MACRO=BED_MESH_CALIBRATE VARIABLE=fuzz_max    VALUE={params.FUZZ_MAX|default(4)|float}

	SET_GCODE_VARIABLE MACRO=BED_MESH_CALIBRATE VARIABLE=probe_dock_enable  VALUE={params.PROBE_DOCK_ENABLE|default(False)|int}
	SET_GCODE_VARIABLE MACRO=BED_MESH_CALIBRATE VARIABLE=attach_macro VALUE='"{params.ATTACH_MACRO|default('Attach_Probe')|string}"'
	SET_GCODE_VARIABLE MACRO=BED_MESH_CALIBRATE VARIABLE=detach_macro VALUE='"{params.DETACH_MACRO|default('Dock_Probe')|string}"'

[gcode_macro VORON_PURGE]
description = A purge macro that adapts to be near your actual printed objects
variable_adaptive_enable = True
variable_z_height = 0.4
variable_tip_distance = 12
variable_purge_amount = 40
variable_flow_rate = 10
variable_x_default = 10
variable_y_default = 10
variable_size = 10
variable_distance_to_object_x = 10
variable_distance_to_object_y = 10
variable_display_parameters = True
gcode =

	{% if display_parameters == True %}
	{ action_respond_info("adaptive_enable : %d" % (adaptive_enable))  }
	{ action_respond_info("z_height        : %f" % (z_height))  }
	{ action_respond_info("tip_distance    : %f" % (tip_distance))  }
	{ action_respond_info("purge_amount    : %f" % (purge_amount))  }
	{ action_respond_info("flow_rate       : %f" % (flow_rate))  }
	{ action_respond_info("x_default       : %f" % (x_default))  }
	{ action_respond_info("y_default       : %f" % (y_default))  }
	{ action_respond_info("size            : %f" % (size))  }
	{ action_respond_info("distance_to_object_x : %f" % (distance_to_object_x))  }
	{ action_respond_info("distance_to_object_y : %f" % (distance_to_object_y))  }
	{% endif %}

	{% if adaptive_enable == True %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_origin = (all_points | map(attribute=0) | min | default(x_default + distance_to_object_x + size)) - distance_to_object_x - size %}
	{% set y_origin = (all_points | map(attribute=1) | min | default(y_default + distance_to_object_y + size)) - distance_to_object_y - size %}
	{% set x_origin = ([x_origin, 0] | max) %}
	{% set y_origin = ([y_origin, 0] | max) %}
	{% else %}
	{% set x_origin = x_default | float %}
	{% set y_origin = y_default | float %}
	{% endif %}
	{% set purge_move_speed = 2.31 * size * flow_rate / (purge_amount * 2.405) %}
	{% set prepurge_speed = flow_rate / 2.405 %}
	{% set travel_speed = printer.toolhead.max_velocity %}
	{ action_respond_info( "x: " + x_origin|string + " y: " + y_origin|string + " purge_move_speed: " + purge_move_speed|string + " prepurge_speed: " + prepurge_speed|string ) }

	G92 E0
	G0 F{travel_speed*60}
	G90
	G0 X{x_origin} Y{y_origin+size/2}
	G0 Z{z_height}
	M83
	G1 E{tip_distance} F{prepurge_speed*60}
	G1 X{x_origin+size*0.289} Y{y_origin+size} E{purge_amount/4} F{purge_move_speed*60}
	G1 E-.5 F2100
	G0 Z{z_height*2}
	G0 X{x_origin+size*0.789} Y{y_origin+size}
	G0 Z{z_height}
	G1 E.5 F2100
	G1 X{x_origin+size*0.211} Y{y_origin} E{purge_amount/2} F{purge_move_speed*60}
	G1 E-.5 F2100
	G0 Z{z_height*2}
	G0 X{x_origin+size*0.711} Y{y_origin}
	G0 Z{z_height}
	G1 E.5 F2100
	G1 X{x_origin+size} Y{y_origin+size/2}  E{purge_amount/4} F{purge_move_speed*60}
	G1 E-.5 F2100
	G92 E0
	M82
	G0 Z{z_height*2}

[gcode_macro SETUP_VORON_PURGE]
gcode =
	SET_GCODE_VARIABLE MACRO=VORON_PURGE  VARIABLE=display_parameters   VALUE={params.DISPLAY_PARAMETERS|default(True)|int}
	SET_GCODE_VARIABLE MACRO=VORON_PURGE  VARIABLE=adaptive_enable   VALUE={params.ADAPTIVE_ENABLE|default(True)|int}
	SET_GCODE_VARIABLE MACRO=VORON_PURGE  VARIABLE=z_height      VALUE={params.Z_HEIGHT|default(0.4)|float}
	SET_GCODE_VARIABLE MACRO=VORON_PURGE  VARIABLE=tip_distance  VALUE={params.TIP_DISTANCE|default(10)|float}
	SET_GCODE_VARIABLE MACRO=VORON_PURGE  VARIABLE=purge_amount  VALUE={params.PURGE_AMOUNT|default(40)|float}
	SET_GCODE_VARIABLE MACRO=VORON_PURGE  VARIABLE=flow_rate     VALUE={params.FLOW_RATE|default(10)|float}
	SET_GCODE_VARIABLE MACRO=VORON_PURGE  VARIABLE=x_default     VALUE={params.X_DEFAULT|default(10)|float}
	SET_GCODE_VARIABLE MACRO=VORON_PURGE  VARIABLE=y_default     VALUE={params.Y_DEFAULT|default(10)|float}
	SET_GCODE_VARIABLE MACRO=VORON_PURGE  VARIABLE=size          VALUE={params.SIZE|default(10)|float}
	SET_GCODE_VARIABLE MACRO=VORON_PURGE  VARIABLE=distance_to_object_x     VALUE={params.DISTANCE_TO_OBJECT_X|default(10)|float}
	SET_GCODE_VARIABLE MACRO=VORON_PURGE  VARIABLE=distance_to_object_y     VALUE={params.DISTANCE_TO_OBJECT_Y|default(10)|float}

[gcode_macro _HOME_X]
gcode =

	{% set RUN_CURRENT_X = printer.configfile.settings['tmc2209 stepper_x'].run_current|float %}
	{% set RUN_CURRENT_Y = printer.configfile.settings['tmc2209 stepper_y'].run_current|float %}
	{% set HOME_CURRENT = 0.7 %}
	SET_TMC_CURRENT STEPPER=stepper_x CURRENT={HOME_CURRENT}
	SET_TMC_CURRENT STEPPER=stepper_y CURRENT={HOME_CURRENT}


	G28 X

	G91
	G1 X-10 F1200


	G4 P1000

	SET_TMC_CURRENT STEPPER=stepper_x CURRENT={RUN_CURRENT_X}
	SET_TMC_CURRENT STEPPER=stepper_y CURRENT={RUN_CURRENT_Y}

[gcode_macro _HOME_Y]
gcode =

	{% set RUN_CURRENT_X = printer.configfile.settings['tmc2209 stepper_x'].run_current|float %}
	{% set RUN_CURRENT_Y = printer.configfile.settings['tmc2209 stepper_y'].run_current|float %}
	{% set HOME_CURRENT = 0.7 %}
	SET_TMC_CURRENT STEPPER=stepper_x CURRENT={HOME_CURRENT}
	SET_TMC_CURRENT STEPPER=stepper_y CURRENT={HOME_CURRENT}


	G28 Y

	G91
	G1 Y-10 F1200


	G4 P1000

	SET_TMC_CURRENT STEPPER=stepper_x CURRENT={RUN_CURRENT_X}
	SET_TMC_CURRENT STEPPER=stepper_y CURRENT={RUN_CURRENT_Y}

[virtual_sdcard]
path = /home/sronnie/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode =

	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}

	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}

	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0

	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode =
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{printer[printer.toolhead.extruder].target}"

	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode =

	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}

	M109 S{last_extruder_temp}

	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode =
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode =
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode =
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode =

	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}

	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}

	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}

	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode =
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}

	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}

	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}

	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}

	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode =
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}

	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}

	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}

	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[mcu SB2240]
canbus_uuid = cad1d0784fd0

[adxl345]
cs_pin = SB2240: PB12
spi_software_sclk_pin = SB2240: PB10
spi_software_mosi_pin = SB2240: PB11
spi_software_miso_pin = SB2240: PB2
axes_map = z,-y,x

[extruder]
step_pin = SB2240: PD0
dir_pin = !SB2240: PD1
enable_pin = !SB2240: PD2
microsteps = 16
rotation_distance = 33.500
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = SB2240: PB13
sensor_type = MAX31865
sensor_pin = SB2240: PA4
spi_bus = spi1
rtd_nominal_r = 1000
rtd_reference_r = 4300
rtd_num_of_wires = 2
control = pid
min_temp = 0
max_temp = 250
pid_kp = 36.166
pid_ki = 2.486
pid_kd = 131.555

[tmc2240 extruder]
cs_pin = SB2240: PA15
spi_software_sclk_pin = SB2240: PB10
spi_software_mosi_pin = SB2240: PB11
spi_software_miso_pin = SB2240: PB2
driver_tpfd = 0
run_current = 0.650
stealthchop_threshold = 999999

[delayed_gcode DISABLEFILAMENTSENSOR]
initial_duration = 1
gcode =
	SET_FILAMENT_SENSOR SENSOR=SMART_FIL_SENS ENABLE=0

[exclude_object]

[force_move]
enable_force_move = True

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f446xx_140028000F5053424E363620-if00
restart_method = command

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 0
max_temp = 85

[temperature_sensor controller]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[temperature_sensor chamber]
sensor_type = Generic 3950
sensor_pin = PF5
min_temp = 0
max_temp = 70

[printer]
kinematics = corexy
max_velocity = 300
max_accel = 5200
max_accel_to_decel = 2500
max_z_velocity = 15
max_z_accel = 350
square_corner_velocity = 5.0

[stepper_x]
step_pin = PF13
dir_pin = PF12
enable_pin = !PF14
rotation_distance = 40
microsteps = 32
full_steps_per_rotation = 200
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_min = 0
position_endstop = 350
position_max = 350
homing_speed = 40
homing_retract_dist = 0
homing_positive_dir = true

[tmc2209 stepper_x]
uart_pin = PC4
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0
diag_pin = ^PG6
driver_sgthrs = 99

[stepper_y]
step_pin = PG0
dir_pin = PG1
enable_pin = !PF15
rotation_distance = 40
microsteps = 32
full_steps_per_rotation = 200
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_min = 0
position_endstop = 350
position_max = 350
homing_speed = 40
homing_retract_dist = 0
homing_positive_dir = true

[tmc2209 stepper_y]
uart_pin = PD11
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0
diag_pin = ^PG9
driver_sgthrs = 93

[stepper_z]
step_pin = PF11
dir_pin = PG3
enable_pin = !PG5
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32
endstop_pin = probe:z_virtual_endstop
position_max = 330
position_min = -5
homing_speed = 30
second_homing_speed = 3
homing_retract_dist = 3

[tmc2209 stepper_z]
uart_pin = PC6
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z1]
step_pin = PG4
dir_pin = !PC1
enable_pin = !PA0
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32

[tmc2209 stepper_z1]
uart_pin = PC7
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z2]
step_pin = PF9
dir_pin = PF10
enable_pin = !PG2
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32

[tmc2209 stepper_z2]
uart_pin = PF2
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z3]
step_pin = PC13
dir_pin = !PF0
enable_pin = !PF1
rotation_distance = 40
gear_ratio = 80:16
microsteps = 32

[tmc2209 stepper_z3]
uart_pin = PE4
interpolate = false
run_current = 0.8
sense_resistor = 0.110
stealthchop_threshold = 0

[heater_bed]
heater_pin = PA3
sensor_type = Generic 3950
sensor_pin = PF3
max_power = 0.775
min_temp = 0
max_temp = 120
control = pid
pid_kp = 45.564
pid_ki = 2.139
pid_kd = 242.628

[input_shaper]
shaper_freq_x = 53.8
shaper_type_x = zv
shaper_freq_y = 40.2
shaper_type_y = mzv

[probe]
pin = PG14
x_offset = 0
y_offset = 0
speed = 10.0
samples = 3
samples_result = median
sample_retract_dist = 5.0
samples_tolerance = 0.015
samples_tolerance_retries = 3
activate_gcode =
	{% set PROBE_TEMP = 150 %}
	{% set MAX_TEMP = PROBE_TEMP + 5 %}
	{% set ACTUAL_TEMP = printer.extruder.temperature %}
	{% set TARGET_TEMP = printer.extruder.target %}

	{% if TARGET_TEMP > PROBE_TEMP %}
	{ action_respond_info('Extruder temperature target of %.1fC is too high, lowering to %.1fC' % (TARGET_TEMP, PROBE_TEMP)) }
	M109 S{ PROBE_TEMP }
	{% else %}

	{% if ACTUAL_TEMP > MAX_TEMP %}
	{ action_respond_info('Extruder temperature %.1fC is still too high, waiting until below %.1fC' % (ACTUAL_TEMP, MAX_TEMP)) }
	TEMPERATURE_WAIT SENSOR=extruder MAXIMUM={ MAX_TEMP }
	{% endif %}
	{% endif %}
z_offset = -0.460

[bed_mesh]
speed = 300
horizontal_move_z = 10
mesh_min = 40, 40
mesh_max = 310,310
fade_start = 0.6
fade_end = 10.0
probe_count = 10,10
algorithm = bicubic
relative_reference_index = 12

[fan]
pin = PA8
kick_start_time = 0.5
off_below = 0.10

[heater_fan hotend_fan]
pin = PE5
max_power = 1.0
kick_start_time = 0.5
heater = extruder
heater_temp = 50.0

[temperature_fan skirt_fans]
pin = PD12
max_power = 1.0
kick_start_time = 0.5
sensor_type = temperature_host
min_temp = 0
max_temp = 85
target_temp = 60
max_delta = 2.5
max_speed = 0.5
min_speed = 0.1
control = watermark

[heater_fan nevermore_fans]
pin = PD13
max_power = 1.0
kick_start_time = 0.5
heater = heater_bed
heater_temp = 35.0

[output_pin caselight]
pin = PD15
pwm = true
value = 0
shutdown_value = 1
scale = 1

[idle_timeout]
timeout = 3600

[quad_gantry_level]
gantry_corners =
	-60,-10
	410,420
points =
	50,25
	50,275
	300,275
	300,25
speed = 100
horizontal_move_z = 10
retries = 5
retry_tolerance = 0.025
max_adjust = 10

[board_pins]
aliases =

	EXP1_1=PE8, EXP1_2=PE7,
	EXP1_3=PE9, EXP1_4=PE10,
	EXP1_5=PE12, EXP1_6=PE13,
	EXP1_7=PE14, EXP1_8=PE15,
	EXP1_9=<GND>, EXP1_10=<5V>,


	EXP2_1=PA6, EXP2_2=PA5,
	EXP2_3=PB1, EXP2_4=PA4,
	EXP2_5=PB2, EXP2_6=PA7,
	EXP2_7=PC15, EXP2_8=<RST>,
	EXP2_9=<GND>, EXP2_10=<5V>

[neopixel btt_mini12864]
pin = EXP1_6
chain_count = 3
initial_red = 0.1
initial_green = 0.5
initial_blue = 0.0
color_order = RGB

[delayed_gcode setdisplayneopixel]
initial_duration = 1
gcode =
	SET_LED LED=btt_mini12864 RED=1 GREEN=1 BLUE=1 INDEX=1 TRANSMIT=0
	SET_LED LED=btt_mini12864 RED=1 GREEN=1 BLUE=1 INDEX=2 TRANSMIT=0
	SET_LED LED=btt_mini12864 RED=1 GREEN=1 BLUE=1 INDEX=3

[bed_mesh default]
version = 1
points =
	0.000000, 0.020000, 0.006250, 0.015000, 0.013750, 0.018750, -0.020000
	-0.038750, -0.008750, -0.026250, -0.001250, 0.003750, -0.006250, -0.028750
	0.000000, -0.003750, -0.025000, 0.003750, -0.015000, -0.020000, -0.038750
	-0.008750, 0.058750, -0.005000, 0.000000, -0.020000, -0.022500, -0.023750
	-0.003750, -0.000000, 0.006250, -0.003750, 0.003750, -0.016250, -0.033750
	-0.011250, 0.017500, 0.017500, 0.005000, 0.003750, 0.001250, 0.003750
	0.008750, 0.033750, 0.025000, 0.030000, 0.033750, 0.031250, 0.038750
tension = 0.2
min_x = 99.73
algo = bicubic
y_count = 7
mesh_y_pps = 2
min_y = 99.27
x_count = 7
max_y = 250.47
mesh_x_pps = 2
max_x = 250.45
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
Loaded MCU 'mcu' 105 commands (v0.10.0-554-g9e4994cb / gcc: (15:7-2018-q2-6) 7.3.1 20180622 (release) [ARM/embedded-7-branch revision 261907] binutils: (2.31.1-11+rpi1+11) 2.31.1)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi4=PE13,PE14,PE12 CLOCK_FREQ=180000000 MCU=stm32f446xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'SB2240': Starting CAN connect
Created a socket
webhooks client 4101480536: New connection
webhooks client 4101480536: Client info {'program': 'Moonraker', 'version': 'v0.8.0-40-gb21f177'}
Loaded MCU 'SB2240' 107 commands (v0.11.0-194-g1a24e7c5 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.34-4+rpi1+14) 2.34)
MCU 'SB2240' config: ADC_MAX=4095 BUS_PINS_i2c1_PA9_PA10=PA9,PA10 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_i2c2_PB13_PB14=PB13,PB14 BUS_PINS_i2c3_PB3_PB4=PB3,PB4 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi3=PB4,PB5,PB3 CANBUS_FREQUENCY=1000000 CLOCK_FREQ=64000000 MCU=stm32g0b1xx PWM_MAX=255 RECEIVE_WINDOW=192 RESERVE_PINS_CAN=PB0,PB1 RESERVE_PINS_crystal=PF0,PF1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-272.788845 slope=1305.179283
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Sending MCU 'SB2240' printer configuration...
Configured MCU 'SB2240' (1024 moves)
Starting heater checks for heater_bed
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (40.0, 40.0)    | (40.0, 40.0)
  1   | (70.0, 40.0)    | (70.0, 40.0)
  2   | (100.0, 40.0)   | (100.0, 40.0)
  3   | (130.0, 40.0)   | (130.0, 40.0)
  4   | (160.0, 40.0)   | (160.0, 40.0)
  5   | (190.0, 40.0)   | (190.0, 40.0)
  6   | (220.0, 40.0)   | (220.0, 40.0)
  7   | (250.0, 40.0)   | (250.0, 40.0)
  8   | (280.0, 40.0)   | (280.0, 40.0)
  9   | (310.0, 40.0)   | (310.0, 40.0)
  10  | (310.0, 70.0)   | (310.0, 70.0)
  11  | (280.0, 70.0)   | (280.0, 70.0)
  12  | (250.0, 70.0)   | (250.0, 70.0)
  13  | (220.0, 70.0)   | (220.0, 70.0)
  14  | (190.0, 70.0)   | (190.0, 70.0)
  15  | (160.0, 70.0)   | (160.0, 70.0)
  16  | (130.0, 70.0)   | (130.0, 70.0)
  17  | (100.0, 70.0)   | (100.0, 70.0)
  18  | (70.0, 70.0)    | (70.0, 70.0)
  19  | (40.0, 70.0)    | (40.0, 70.0)
  20  | (40.0, 100.0)   | (40.0, 100.0)
  21  | (70.0, 100.0)   | (70.0, 100.0)
  22  | (100.0, 100.0)  | (100.0, 100.0)
  23  | (130.0, 100.0)  | (130.0, 100.0)
  24  | (160.0, 100.0)  | (160.0, 100.0)
  25  | (190.0, 100.0)  | (190.0, 100.0)
  26  | (220.0, 100.0)  | (220.0, 100.0)
  27  | (250.0, 100.0)  | (250.0, 100.0)
  28  | (280.0, 100.0)  | (280.0, 100.0)
  29  | (310.0, 100.0)  | (310.0, 100.0)
  30  | (310.0, 130.0)  | (310.0, 130.0)
  31  | (280.0, 130.0)  | (280.0, 130.0)
  32  | (250.0, 130.0)  | (250.0, 130.0)
  33  | (220.0, 130.0)  | (220.0, 130.0)
  34  | (190.0, 130.0)  | (190.0, 130.0)
  35  | (160.0, 130.0)  | (160.0, 130.0)
  36  | (130.0, 130.0)  | (130.0, 130.0)
  37  | (100.0, 130.0)  | (100.0, 130.0)
  38  | (70.0, 130.0)   | (70.0, 130.0)
  39  | (40.0, 130.0)   | (40.0, 130.0)
  40  | (40.0, 160.0)   | (40.0, 160.0)
  41  | (70.0, 160.0)   | (70.0, 160.0)
  42  | (100.0, 160.0)  | (100.0, 160.0)
  43  | (130.0, 160.0)  | (130.0, 160.0)
  44  | (160.0, 160.0)  | (160.0, 160.0)
  45  | (190.0, 160.0)  | (190.0, 160.0)
  46  | (220.0, 160.0)  | (220.0, 160.0)
  47  | (250.0, 160.0)  | (250.0, 160.0)
  48  | (280.0, 160.0)  | (280.0, 160.0)
  49  | (310.0, 160.0)  | (310.0, 160.0)
  50  | (310.0, 190.0)  | (310.0, 190.0)
  51  | (280.0, 190.0)  | (280.0, 190.0)
  52  | (250.0, 190.0)  | (250.0, 190.0)
  53  | (220.0, 190.0)  | (220.0, 190.0)
  54  | (190.0, 190.0)  | (190.0, 190.0)
  55  | (160.0, 190.0)  | (160.0, 190.0)
  56  | (130.0, 190.0)  | (130.0, 190.0)
  57  | (100.0, 190.0)  | (100.0, 190.0)
  58  | (70.0, 190.0)   | (70.0, 190.0)
  59  | (40.0, 190.0)   | (40.0, 190.0)
  60  | (40.0, 220.0)   | (40.0, 220.0)
  61  | (70.0, 220.0)   | (70.0, 220.0)
  62  | (100.0, 220.0)  | (100.0, 220.0)
  63  | (130.0, 220.0)  | (130.0, 220.0)
  64  | (160.0, 220.0)  | (160.0, 220.0)
  65  | (190.0, 220.0)  | (190.0, 220.0)
  66  | (220.0, 220.0)  | (220.0, 220.0)
  67  | (250.0, 220.0)  | (250.0, 220.0)
  68  | (280.0, 220.0)  | (280.0, 220.0)
  69  | (310.0, 220.0)  | (310.0, 220.0)
  70  | (310.0, 250.0)  | (310.0, 250.0)
  71  | (280.0, 250.0)  | (280.0, 250.0)
  72  | (250.0, 250.0)  | (250.0, 250.0)
  73  | (220.0, 250.0)  | (220.0, 250.0)
  74  | (190.0, 250.0)  | (190.0, 250.0)
  75  | (160.0, 250.0)  | (160.0, 250.0)
  76  | (130.0, 250.0)  | (130.0, 250.0)
  77  | (100.0, 250.0)  | (100.0, 250.0)
  78  | (70.0, 250.0)   | (70.0, 250.0)
  79  | (40.0, 250.0)   | (40.0, 250.0)
  80  | (40.0, 280.0)   | (40.0, 280.0)
  81  | (70.0, 280.0)   | (70.0, 280.0)
  82  | (100.0, 280.0)  | (100.0, 280.0)
  83  | (130.0, 280.0)  | (130.0, 280.0)
  84  | (160.0, 280.0)  | (160.0, 280.0)
  85  | (190.0, 280.0)  | (190.0, 280.0)
  86  | (220.0, 280.0)  | (220.0, 280.0)
  87  | (250.0, 280.0)  | (250.0, 280.0)
  88  | (280.0, 280.0)  | (280.0, 280.0)
  89  | (310.0, 280.0)  | (310.0, 280.0)
  90  | (310.0, 310.0)  | (310.0, 310.0)
  91  | (280.0, 310.0)  | (280.0, 310.0)
  92  | (250.0, 310.0)  | (250.0, 310.0)
  93  | (220.0, 310.0)  | (220.0, 310.0)
  94  | (190.0, 310.0)  | (190.0, 310.0)
  95  | (160.0, 310.0)  | (160.0, 310.0)
  96  | (130.0, 310.0)  | (130.0, 310.0)
  97  | (100.0, 310.0)  | (100.0, 310.0)
  98  | (70.0, 310.0)   | (70.0, 310.0)
  99  | (40.0, 310.0)   | (40.0, 310.0)
bed_mesh: relative_reference_index 12 is (250.00, 70.00)
Starting heater checks for extruder
Stats 26.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=3261 bytes_read=6454 bytes_retransmit=9 bytes_invalid=0 send_seq=276 receive_seq=276 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180006380 SB2240: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000040 bytes_write=1357 bytes_read=4572 bytes_retransmit=0 bytes_invalid=0 send_seq=135 receive_seq=135 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64015241 adj=64015627  raspberry_pi: temp=35.5 controller: temp=0.0 chamber: temp=0.0 heater_bed: target=0 temp=0.0 pwm=0.000 sysload=0.43 cputime=2.461 memavail=7536580 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 4101480536
webhooks: registering remote method 'reboot_machine' for connection id: 4101480536
webhooks: registering remote method 'pause_job_queue' for connection id: 4101480536
webhooks: registering remote method 'start_job_queue' for connection id: 4101480536
Stats 27.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=3267 bytes_read=6558 bytes_retransmit=9 bytes_invalid=0 send_seq=277 receive_seq=277 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180002666 SB2240: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000040 bytes_write=1363 bytes_read=4636 bytes_retransmit=0 bytes_invalid=0 send_seq=136 receive_seq=136 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64005030 adj=64011900  raspberry_pi: temp=37.5 controller: temp=23.9 chamber: temp=19.3 heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.43 cputime=2.485 memavail=7530716 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.9 pwm=0.000
Stats 28.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=3298 bytes_read=6783 bytes_retransmit=9 bytes_invalid=0 send_seq=280 receive_seq=280 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001703 SB2240: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000040 bytes_write=1369 bytes_read=4700 bytes_retransmit=0 bytes_invalid=0 send_seq=137 receive_seq=137 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64002710 adj=63999352  raspberry_pi: temp=38.0 controller: temp=23.8 chamber: temp=19.3 heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.43 cputime=2.520 memavail=7522504 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
Stats 29.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=3304 bytes_read=6931 bytes_retransmit=9 bytes_invalid=0 send_seq=281 receive_seq=281 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001460 SB2240: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000040 bytes_write=1375 bytes_read=4780 bytes_retransmit=0 bytes_invalid=0 send_seq=138 receive_seq=138 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64001372 adj=63997236  raspberry_pi: temp=37.0 controller: temp=23.9 chamber: temp=19.2 heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.43 cputime=2.533 memavail=7518368 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.7 pwm=0.000
Stats 30.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=3310 bytes_read=7079 bytes_retransmit=9 bytes_invalid=0 send_seq=282 receive_seq=282 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001593 SB2240: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000040 bytes_write=1381 bytes_read=4844 bytes_retransmit=0 bytes_invalid=0 send_seq=139 receive_seq=139 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000817 adj=63996027  raspberry_pi: temp=36.5 controller: temp=24.0 chamber: temp=19.4 heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.48 cputime=2.543 memavail=7518068 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.6 pwm=0.000
Stats 31.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=3316 bytes_read=7271 bytes_retransmit=9 bytes_invalid=0 send_seq=283 receive_seq=283 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001391 SB2240: mcu_awake=0.002 mcu_task_avg=0.000016 mcu_task_stddev=0.000020 bytes_write=1387 bytes_read=4922 bytes_retransmit=0 bytes_invalid=0 send_seq=140 receive_seq=140 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000486 adj=63995897  raspberry_pi: temp=37.0 controller: temp=24.0 chamber: temp=19.3 heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.48 cputime=2.564 memavail=7519968 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.5 pwm=0.000
Stats 32.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=3322 bytes_read=7419 bytes_retransmit=9 bytes_invalid=0 send_seq=284 receive_seq=284 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001297 SB2240: mcu_awake=0.002 mcu_task_avg=0.000016 mcu_task_stddev=0.000020 bytes_write=1393 bytes_read=5002 bytes_retransmit=0 bytes_invalid=0 send_seq=141 receive_seq=141 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000440 adj=63996375  raspberry_pi: temp=38.0 controller: temp=24.1 chamber: temp=19.3 heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.48 cputime=2.579 memavail=7522416 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.3 pwm=0.000
Stats 33.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=3328 bytes_read=7582 bytes_retransmit=9 bytes_invalid=0 send_seq=285 receive_seq=285 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001266 SB2240: mcu_awake=0.002 mcu_task_avg=0.000016 mcu_task_stddev=0.000020 bytes_write=1399 bytes_read=5066 bytes_retransmit=0 bytes_invalid=0 send_seq=142 receive_seq=142 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000466 adj=63997253  raspberry_pi: temp=37.5 controller: temp=24.0 chamber: temp=19.3 heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.48 cputime=2.594 memavail=7521028 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.2 pwm=0.000
Stats 34.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=3334 bytes_read=7774 bytes_retransmit=9 bytes_invalid=0 send_seq=286 receive_seq=286 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001230 SB2240: mcu_awake=0.002 mcu_task_avg=0.000016 mcu_task_stddev=0.000020 bytes_write=1405 bytes_read=5130 bytes_retransmit=0 bytes_invalid=0 send_seq=143 receive_seq=143 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000226 adj=63998048  raspberry_pi: temp=37.0 controller: temp=24.1 chamber: temp=19.3 heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.48 cputime=2.609 memavail=7520616 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.1 pwm=0.000
Stats 35.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=3340 bytes_read=7922 bytes_retransmit=9 bytes_invalid=0 send_seq=287 receive_seq=287 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001240 SB2240: mcu_awake=0.002 mcu_task_avg=0.000016 mcu_task_stddev=0.000020 bytes_write=1411 bytes_read=5210 bytes_retransmit=0 bytes_invalid=0 send_seq=144 receive_seq=144 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000135 adj=63997899  raspberry_pi: temp=37.5 controller: temp=24.1 chamber: temp=19.2 heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.52 cputime=2.623 memavail=7520656 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=36.9 pwm=0.000
Stats 36.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=3346 bytes_read=8070 bytes_retransmit=9 bytes_invalid=0 send_seq=288 receive_seq=288 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001308 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1417 bytes_read=5288 bytes_retransmit=0 bytes_invalid=0 send_seq=145 receive_seq=145 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000000 adj=63998054  raspberry_pi: temp=37.0 controller: temp=24.2 chamber: temp=19.3 heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.52 cputime=2.641 memavail=7520908 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=36.8 pwm=0.000
Stats 37.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=3352 bytes_read=8262 bytes_retransmit=9 bytes_invalid=0 send_seq=289 receive_seq=289 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001627 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1423 bytes_read=5352 bytes_retransmit=0 bytes_invalid=0 send_seq=146 receive_seq=146 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999991 adj=63997890  raspberry_pi: temp=36.0 controller: temp=24.3 chamber: temp=19.4 heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.52 cputime=2.666 memavail=7520904 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=36.7 pwm=0.000
Stats 38.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3358 bytes_read=8424 bytes_retransmit=9 bytes_invalid=0 send_seq=290 receive_seq=290 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001621 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1429 bytes_read=5432 bytes_retransmit=0 bytes_invalid=0 send_seq=147 receive_seq=147 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999947 adj=63997808  raspberry_pi: temp=36.0 controller: temp=24.3 chamber: temp=19.3 heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.52 cputime=2.689 memavail=7520208 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=36.5 pwm=0.000
Stats 39.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3364 bytes_read=8572 bytes_retransmit=9 bytes_invalid=0 send_seq=291 receive_seq=291 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001551 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1435 bytes_read=5496 bytes_retransmit=0 bytes_invalid=0 send_seq=148 receive_seq=148 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000018 adj=63998041  raspberry_pi: temp=36.5 controller: temp=24.3 chamber: temp=19.4 heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.52 cputime=2.705 memavail=7518984 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=36.4 pwm=0.000
Stats 40.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3370 bytes_read=8752 bytes_retransmit=9 bytes_invalid=0 send_seq=292 receive_seq=292 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001482 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1441 bytes_read=5560 bytes_retransmit=0 bytes_invalid=0 send_seq=149 receive_seq=149 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999937 adj=63998787  raspberry_pi: temp=37.0 controller: temp=24.2 chamber: temp=19.3 heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.48 cputime=2.718 memavail=7521948 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=36.3 pwm=0.000
Stats 41.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3376 bytes_read=8893 bytes_retransmit=9 bytes_invalid=0 send_seq=293 receive_seq=293 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001433 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1447 bytes_read=5654 bytes_retransmit=0 bytes_invalid=0 send_seq=150 receive_seq=150 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999885 adj=63998720  raspberry_pi: temp=36.5 controller: temp=24.2 chamber: temp=19.4 heater_bed: target=0 temp=18.8 pwm=0.000 sysload=0.48 cputime=2.731 memavail=7521572 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=36.2 pwm=0.000
Stats 42.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3382 bytes_read=9041 bytes_retransmit=9 bytes_invalid=0 send_seq=294 receive_seq=294 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001391 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1453 bytes_read=5718 bytes_retransmit=0 bytes_invalid=0 send_seq=151 receive_seq=151 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999833 adj=63998735  raspberry_pi: temp=36.0 controller: temp=24.2 chamber: temp=19.3 heater_bed: target=0 temp=18.8 pwm=0.000 sysload=0.48 cputime=2.744 memavail=7521096 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=36.1 pwm=0.000
Stats 43.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3388 bytes_read=9247 bytes_retransmit=9 bytes_invalid=0 send_seq=295 receive_seq=295 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001359 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1459 bytes_read=5782 bytes_retransmit=0 bytes_invalid=0 send_seq=152 receive_seq=152 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999864 adj=63998719  raspberry_pi: temp=36.0 controller: temp=24.3 chamber: temp=19.4 heater_bed: target=0 temp=18.7 pwm=0.000 sysload=0.48 cputime=2.757 memavail=7520648 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=36.0 pwm=0.000
Stats 44.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3394 bytes_read=9395 bytes_retransmit=9 bytes_invalid=0 send_seq=296 receive_seq=296 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001384 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1465 bytes_read=5862 bytes_retransmit=0 bytes_invalid=0 send_seq=153 receive_seq=153 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999829 adj=63999051  raspberry_pi: temp=37.0 controller: temp=24.3 chamber: temp=19.4 heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.48 cputime=2.779 memavail=7519900 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 45.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3400 bytes_read=9543 bytes_retransmit=9 bytes_invalid=0 send_seq=297 receive_seq=297 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001583 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1471 bytes_read=5862 bytes_retransmit=35 bytes_invalid=0 send_seq=154 receive_seq=153 retransmit_seq=154 srtt=0.001 rttvar=0.000 rto=0.800 ready_bytes=0 upcoming_bytes=0 freq=63999829 adj=63998901  raspberry_pi: temp=36.5 controller: temp=24.3 chamber: temp=19.3 heater_bed: target=0 temp=18.8 pwm=0.000 sysload=0.52 cputime=2.802 memavail=7519884 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 46.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3406 bytes_read=9735 bytes_retransmit=9 bytes_invalid=0 send_seq=298 receive_seq=298 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001569 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1477 bytes_read=5862 bytes_retransmit=48 bytes_invalid=0 send_seq=155 receive_seq=153 retransmit_seq=155 srtt=0.001 rttvar=0.000 rto=1.600 ready_bytes=0 upcoming_bytes=0 freq=63999829 adj=63998610  raspberry_pi: temp=36.5 controller: temp=24.3 chamber: temp=19.3 heater_bed: target=0 temp=18.7 pwm=0.000 sysload=0.52 cputime=2.825 memavail=7519884 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 47.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3412 bytes_read=9883 bytes_retransmit=9 bytes_invalid=0 send_seq=299 receive_seq=299 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001554 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1483 bytes_read=5862 bytes_retransmit=48 bytes_invalid=0 send_seq=156 receive_seq=153 retransmit_seq=155 srtt=0.001 rttvar=0.000 rto=1.600 ready_bytes=0 upcoming_bytes=0 freq=63999829 adj=63998803  raspberry_pi: temp=36.5 controller: temp=24.3 chamber: temp=19.3 heater_bed: target=0 temp=18.8 pwm=0.000 sysload=0.52 cputime=2.846 memavail=7519664 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 48.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3418 bytes_read=10045 bytes_retransmit=9 bytes_invalid=0 send_seq=300 receive_seq=300 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001546 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1489 bytes_read=5862 bytes_retransmit=73 bytes_invalid=0 send_seq=157 receive_seq=153 retransmit_seq=157 srtt=0.001 rttvar=0.000 rto=3.200 ready_bytes=0 upcoming_bytes=0 freq=63999829 adj=63998951  raspberry_pi: temp=35.0 controller: temp=24.4 chamber: temp=19.3 heater_bed: target=0 temp=18.7 pwm=0.000 sysload=0.52 cputime=2.868 memavail=7519664 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Timeout with MCU 'SB2240' (eventtime=49.847613)
Transition to shutdown state: Lost communication with MCU 'SB2240'
Dumping gcode input 0 blocks
Dumping 20 requests for client 4101480536
Received 27.229910: b'{"id": 4137749952, "method": "objects/list", "params": {}}'
Received 27.231958: b'{"id": 4137749952, "method": "objects/query", "params": {"objects": {"configfile": null}}}'
Received 27.486690: b'{"id": 4137797328, "method": "register_remote_method", "params": {"response_template": {"method": "shutdown_machine"}, "remote_method": "shutdown_machine"}}'
Received 27.488853: b'{"id": 3909033168, "method": "register_remote_method", "params": {"response_template": {"method": "reboot_machine"}, "remote_method": "reboot_machine"}}'
Received 27.491313: b'{"id": 4137749952, "method": "register_remote_method", "params": {"response_template": {"method": "pause_job_queue"}, "remote_method": "pause_job_queue"}}'
Received 27.493462: b'{"id": 3909033168, "method": "register_remote_method", "params": {"response_template": {"method": "start_job_queue"}, "remote_method": "start_job_queue"}}'
Received 27.497144: b'{"id": 3908912656, "method": "objects/query", "params": {"objects": {"heaters": null}}}'
Received 27.499522: b'{"id": 3908912560, "method": "objects/query", "params": {"objects": {"heaters": null}}}'
Received 27.732320: b'{"id": 3908912656, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "temperature_sensor raspberry_pi": null, "temperature_sensor controller": null, "temperature_sensor chamber": null, "heater_bed": null, "temperature_fan skirt_fans": null, "extruder": null}, "response_template": {"method": "process_status_update"}}}'
Received 27.732320: b'{"id": 4137781040, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "temperature_sensor raspberry_pi": null, "temperature_sensor controller": null, "temperature_sensor chamber": null, "heater_bed": null, "temperature_fan skirt_fans": null, "extruder": null}, "response_template": {"method": "process_status_update"}}}'
Received 27.907774: b'{"id": 3898898464, "method": "info", "params": {}}'
Received 27.919261: b'{"id": 3898898656, "method": "objects/query", "params": {"objects": {"configfile": null}}}'
Received 28.003606: b'{"id": 3908911384, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "temperature_sensor raspberry_pi": null, "temperature_sensor controller": null, "temperature_sensor chamber": null, "heater_bed": null, "temperature_fan skirt_fans": null, "extruder": null, "bed_mesh": ["profile_name", "mesh_max", "mesh_min", "probed_matrix", "profiles"], "configfile": ["config"], "display_status": ["progress", "message"], "fan": ["speed"], "gcode_move": ["extrude_factor", "gcode_position", "homing_origin", "speed_factor", "speed"], "idle_timeout": ["state"], "pause_resume": ["is_paused"], "toolhead": ["homed_axes", "estimated_print_time", "print_time", "position", "extruder", "max_accel", "max_accel_to_decel", "max_velocity", "square_corner_velocity"], "virtual_sdcard": ["file_position", "is_active", "progress"], "firmware_retraction": ["retract_length", "retract_speed", "unretract_extra_length", "unretract_speed"], "motion_report": ["live_position", "live_velocity", "live_extruder_velocity"], "exclude_object": ["current_object", "objects", "excluded_objects"], "heater_fan hotend_fan": ["speed"], "heater_fan nevermore_fans": ["speed"], "filament_motion_sensor SMART_FIL_SENS": ["enabled", "filament_detected"], "output_pin caselight": ["value"]}, "response_template": {"method": "process_status_update"}}}'
Received 28.015248: b'{"id": 4137782048, "method": "objects/query", "params": {"objects": {"bed_mesh": null, "configfile": null, "display_status": null, "extruder": null, "fan": null, "gcode_move": null, "heater_bed": null, "idle_timeout": null, "pause_resume": null, "print_stats": null, "toolhead": null, "virtual_sdcard": null, "webhooks": null, "motion_report": null, "firmware_retraction": null, "exclude_object": null, "temperature_sensor raspberry_pi": null, "temperature_sensor controller": null, "temperature_sensor chamber": null, "temperature_fan skirt_fans": null, "heater_fan hotend_fan": null, "heater_fan nevermore_fans": null, "filament_motion_sensor SMART_FIL_SENS": null, "output_pin caselight": null}}}'
Received 28.273797: b'{"id": 3888707712, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "temperature_sensor raspberry_pi": null, "temperature_sensor controller": null, "temperature_sensor chamber": null, "heater_bed": null, "temperature_fan skirt_fans": null, "extruder": null, "bed_mesh": ["profile_name", "mesh_max", "mesh_min", "probed_matrix", "profiles"], "configfile": ["config"], "display_status": ["progress", "message"], "fan": ["speed"], "gcode_move": ["extrude_factor", "gcode_position", "homing_origin", "speed_factor", "speed"], "idle_timeout": ["state"], "pause_resume": ["is_paused"], "toolhead": ["homed_axes", "estimated_print_time", "print_time", "position", "extruder", "max_accel", "max_accel_to_decel", "max_velocity", "square_corner_velocity"], "virtual_sdcard": null, "firmware_retraction": ["retract_length", "retract_speed", "unretract_extra_length", "unretract_speed"], "motion_report": ["live_position", "live_velocity", "live_extruder_velocity"], "exclude_object": ["current_object", "objects", "excluded_objects"], "heater_fan hotend_fan": ["speed"], "heater_fan nevermore_fans": ["speed"], "filament_motion_sensor SMART_FIL_SENS": ["enabled", "filament_detected"], "output_pin caselight": ["value"], "history": null}, "response_template": {"method": "process_status_update"}}}'
Received 28.489624: b'{"id": 3888816288, "method": "objects/query", "params": {"objects": {"print_stats": null}}}'
Received 30.996861: b'{"id": 3888819264, "method": "info", "params": {}}'
Received 30.997727: b'{"id": 3888816312, "method": "objects/list", "params": {}}'
Received 30.998797: b'{"id": 3888820032, "method": "gcode/help", "params": {}}'
Received 31.023381: b'{"id": 3888818208, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "temperature_sensor raspberry_pi": null, "temperature_sensor controller": null, "temperature_sensor chamber": null, "heater_bed": null, "temperature_fan skirt_fans": null, "extruder": null, "bed_mesh": null, "configfile": null, "display_status": null, "fan": null, "gcode_move": null, "idle_timeout": null, "pause_resume": null, "toolhead": null, "virtual_sdcard": null, "firmware_retraction": ["retract_length", "retract_speed", "unretract_extra_length", "unretract_speed"], "motion_report": null, "exclude_object": null, "heater_fan hotend_fan": null, "heater_fan nevermore_fans": null, "filament_motion_sensor SMART_FIL_SENS": null, "output_pin caselight": null, "history": null, "mcu": null, "mcu SB2240": null, "gcode_macro clean_nozzle": null, "neopixel sb_leds": null, "gcode_macro _sb_vars": null, "gcode_macro _set_sb_leds": null, "gcode_macro _set_sb_leds_by_name": null, "gcode_macro _set_logo_leds": null, "gcode_macro _set_nozzle_leds": null, "gcode_macro set_logo_leds_off": null, "gcode_macro set_nozzle_leds_on": null, "gcode_macro set_nozzle_leds_off": null, "gcode_macro status_off": null, "gcode_macro status_ready": null, "gcode_macro status_busy": null, "gcode_macro status_heating": null, "gcode_macro status_leveling": null, "gcode_macro status_homing": null, "gcode_macro status_cleaning": null, "gcode_macro status_meshing": null, "gcode_macro status_calibrating_z": null, "gcode_macro status_printing": null, "gcode_macro G32": null, "gcode_macro PRINT_END": null, "gcode_macro PRINT_START": null, "gcode_macro BED_MESH_CALIBRATE": null, "gcode_macro CASE_LIGHT_ON": null, "gcode_macro CASE_LIGHT_OFF": null, "gcode_macro SFS_ENABLE": null, "gcode_macro SFS_DISABLE": null, "gcode_macro M600": null, "gcode_macro LOAD": null, "gcode_macro UNPAUSE": null, "gcode_macro DUMP_VARIABLES": null, "gcode_macro SET_TEMPERATURE_LED": null, "gcode_macro CLEAR_TEMPERATURE_LED": null, "gcode_macro SETUP_KAMP_MESHING": null, "gcode_macro VORON_PURGE": null, "gcode_macro SETUP_VORON_PURGE": null, "gcode_macro _HOME_X": null, "gcode_macro _HOME_Y": null, "gcode_macro CANCEL_PRINT": null, "gcode_macro PAUSE": null, "gcode_macro RESUME": null, "gcode_macro SET_PAUSE_NEXT_LAYER": null, "gcode_macro SET_PAUSE_AT_LAYER": null, "gcode_macro SET_PRINT_STATS_INFO": null, "gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL": null, "gcode_macro _CLIENT_EXTRUDE": null, "gcode_macro _CLIENT_RETRACT": null, "stepper_enable": null, "tmc2240 extruder": null, "heaters": null, "temperature_host raspberry_pi": null, "tmc2209 stepper_x": null, "tmc2209 stepper_y": null, "tmc2209 stepper_z": null, "tmc2209 stepper_z1": null, "tmc2209 stepper_z2": null, "tmc2209 stepper_z3": null, "probe": null, "temperature_host skirt_fans": null, "quad_gantry_level": null, "neopixel btt_mini12864": null, "query_endstops": null, "system_stats": null, "manual_probe": null}, "response_template": {"method": "process_status_update"}}}'
gcode state: absolute_coord=True absolute_extrude=True base_position=[0.0, 0.0, 0.0, 0.0] last_position=[0.0, 0.0, 0.0, 0.0] homing_position=[0.0, 0.0, 0.0, 0.0] speed_factor=0.016666666666666666 extrude_factor=1.0 speed=25.0
Reactor garbage collection: (32.495834832, 0.0, 0.0)
Stats 49.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3424 bytes_read=10237 bytes_retransmit=9 bytes_invalid=0 send_seq=301 receive_seq=301 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001548 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1495 bytes_read=5862 bytes_retransmit=73 bytes_invalid=0 send_seq=158 receive_seq=153 retransmit_seq=157 srtt=0.001 rttvar=0.000 rto=3.200 ready_bytes=0 upcoming_bytes=0 freq=63999829 adj=63999050  raspberry_pi: temp=35.5 controller: temp=24.2 chamber: temp=19.3 heater_bed: target=0 temp=18.7 pwm=0.000 sysload=0.52 cputime=2.890 memavail=7519664 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
MCU 'mcu' shutdown: Command request
clocksync state: mcu_freq=180000000 last_clock=10131131401 clock_est=(33.052 7194462767 180001548.525) min_half_rtt=0.000082 min_rtt_time=43.459 time_avg=33.052(79.322) clock_avg=7194462767.711(14278108655.659) pred_variance=10619040951.743
Dumping serial stats: bytes_write=3430 bytes_read=10249 bytes_retransmit=9 bytes_invalid=0 send_seq=302 receive_seq=302 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0
Dumping send queue 100 messages
Sent 0 26.538030 26.538030 19: seq: 1a, tmcuart_send oid=3 write=b'\xea\x03h2\x80\x1e\xfa\xef?\xdf' read=0
Sent 1 26.540980 26.540980 14: seq: 1b, tmcuart_send oid=3 write=b'\xea\x03H \xe4' read=10
Sent 2 26.545879 26.545879 19: seq: 1c, tmcuart_send oid=3 write=b'\xea\x03\x08>\xe4\x1ar\x88\xa4\x85' read=0
Sent 3 26.548982 26.548982 14: seq: 1d, tmcuart_send oid=3 write=b'\xea\x03H \xe4' read=10
Sent 4 26.553967 26.553967 19: seq: 1e, tmcuart_send oid=3 write=b'\xea\x03(2\x80\x00\x02\x88"\xf3' read=0
Sent 5 26.557095 26.557095 14: seq: 1f, tmcuart_send oid=3 write=b'\xea\x03H \xe4' read=10
Sent 6 26.561911 26.561911 19: seq: 10, tmcuart_send oid=3 write=b'\xea\x03\x088\x80\x00\x02\x08 \xba' read=0
Sent 7 26.565333 26.565333 14: seq: 11, tmcuart_send oid=3 write=b'\xea\x03H \xe4' read=10
Sent 8 26.570447 26.570447 14: seq: 12, tmcuart_send oid=4 write=b'\xea\x03H \xe4' read=10
Sent 9 26.574804 26.574804 19: seq: 13, tmcuart_send oid=4 write=b'\xea\x03\x080\x80\x00\n\x08\xb8\x87' read=0
Sent 10 26.577871 26.577871 14: seq: 14, tmcuart_send oid=4 write=b'\xea\x03H \xe4' read=10
Sent 11 26.582343 26.582343 19: seq: 15, tmcuart_send oid=4 write=b'\xea\x03h0\x80\x00\x12\x08 \xda' read=0
Sent 12 26.585347 26.585347 14: seq: 16, tmcuart_send oid=4 write=b'\xea\x03H \xe4' read=10
Sent 13 26.590089 26.590089 19: seq: 17, tmcuart_send oid=4 write=b'\xea\x03\x88\xbd\x91\x06\x02h*\xd5' read=0
Sent 14 26.593089 26.593089 14: seq: 18, tmcuart_send oid=4 write=b'\xea\x03H \xe4' read=10
Sent 15 26.597831 26.597831 19: seq: 19, tmcuart_send oid=4 write=b'\xea\x03\x082\x80\x10\xca(\xa3\xc1' read=0
Sent 16 26.601165 26.601165 14: seq: 1a, tmcuart_send oid=4 write=b'\xea\x03H \xe4' read=10
Sent 17 26.606116 26.606116 19: seq: 1b, tmcuart_send oid=4 write=b'\xea\x03h2\x80\x1e\xfa\xef?\xdf' read=0
Sent 18 26.609118 26.609118 14: seq: 1c, tmcuart_send oid=4 write=b'\xea\x03H \xe4' read=10
Sent 19 26.613865 26.613865 19: seq: 1d, tmcuart_send oid=4 write=b'\xea\x03\x08>\xe4\x1ar\x88\xa4\x85' read=0
Sent 20 26.616889 26.616889 14: seq: 1e, tmcuart_send oid=4 write=b'\xea\x03H \xe4' read=10
Sent 21 26.621629 26.621629 19: seq: 1f, tmcuart_send oid=4 write=b'\xea\x03(2\x80\x00\x02\x88"\xf3' read=0
Sent 22 26.624702 26.624702 14: seq: 10, tmcuart_send oid=4 write=b'\xea\x03H \xe4' read=10
Sent 23 26.629398 26.629398 19: seq: 11, tmcuart_send oid=4 write=b'\xea\x03\x088\x80\x00\x02\x08 \xba' read=0
Sent 24 26.632455 26.632455 14: seq: 12, tmcuart_send oid=4 write=b'\xea\x03H \xe4' read=10
Sent 25 26.637306 26.637306 14: seq: 13, tmcuart_send oid=5 write=b'\xea\x03H \xe4' read=10
Sent 26 26.641576 26.641576 19: seq: 14, tmcuart_send oid=5 write=b'\xea\x03\x080\x80\x00\n\x08\xb8\x87' read=0
Sent 27 26.644741 26.644741 14: seq: 15, tmcuart_send oid=5 write=b'\xea\x03H \xe4' read=10
Sent 28 26.649239 26.649239 19: seq: 16, tmcuart_send oid=5 write=b'\xea\x03h0\x80\x00\x12\x08 \xda' read=0
Sent 29 26.652659 26.652659 14: seq: 17, tmcuart_send oid=5 write=b'\xea\x03H \xe4' read=10
Sent 30 26.657985 26.657985 19: seq: 18, tmcuart_send oid=5 write=b'\xea\x03\x88\xbd\x91\x06\x02h*\xd5' read=0
Sent 31 26.661091 26.661091 14: seq: 19, tmcuart_send oid=5 write=b'\xea\x03H \xe4' read=10
Sent 32 26.665938 26.665938 19: seq: 1a, tmcuart_send oid=5 write=b'\xea\x03\x082\x80\x10\xca(\xa3\xc1' read=0
Sent 33 26.669090 26.669090 14: seq: 1b, tmcuart_send oid=5 write=b'\xea\x03H \xe4' read=10
Sent 34 26.674022 26.674022 19: seq: 1c, tmcuart_send oid=5 write=b'\xea\x03h2\x80\x1e\xfa\xef?\xdf' read=0
Sent 35 26.677221 26.677221 14: seq: 1d, tmcuart_send oid=5 write=b'\xea\x03H \xe4' read=10
Sent 36 26.681967 26.681967 19: seq: 1e, tmcuart_send oid=5 write=b'\xea\x03\x08>\xe4\x1ar\x88\xa4\x85' read=0
Sent 37 26.685085 26.685085 14: seq: 1f, tmcuart_send oid=5 write=b'\xea\x03H \xe4' read=10
Sent 38 26.690904 26.690904 19: seq: 10, tmcuart_send oid=5 write=b'\xea\x03(2\x80\x00\x02\x88"\xf3' read=0
Sent 39 26.693918 26.693918 14: seq: 11, tmcuart_send oid=5 write=b'\xea\x03H \xe4' read=10
Sent 40 26.698657 26.698657 19: seq: 12, tmcuart_send oid=5 write=b'\xea\x03\x088\x80\x00\x02\x08 \xba' read=0
Sent 41 26.701693 26.701693 14: seq: 13, tmcuart_send oid=5 write=b'\xea\x03H \xe4' read=10
Sent 42 26.706536 26.706536 14: seq: 14, tmcuart_send oid=6 write=b'\xea\x03H \xe4' read=10
Sent 43 26.710890 26.710890 19: seq: 15, tmcuart_send oid=6 write=b'\xea\x03\x080\x80\x00\n\x08\xb8\x87' read=0
Sent 44 26.713918 26.713918 14: seq: 16, tmcuart_send oid=6 write=b'\xea\x03H \xe4' read=10
Sent 45 26.718257 26.718257 19: seq: 17, tmcuart_send oid=6 write=b'\xea\x03h0\x80\x00\x12\x08 \xda' read=0
Sent 46 26.719988 26.719988 6: seq: 18, get_clock
Sent 47 26.721374 26.721374 14: seq: 19, tmcuart_send oid=6 write=b'\xea\x03H \xe4' read=10
Sent 48 26.726207 26.726207 19: seq: 1a, tmcuart_send oid=6 write=b'\xea\x03\x88\xbd\x91\x06\x02h*\xd5' read=0
Sent 49 26.729253 26.729253 14: seq: 1b, tmcuart_send oid=6 write=b'\xea\x03H \xe4' read=10
Sent 50 26.734042 26.734042 19: seq: 1c, tmcuart_send oid=6 write=b'\xea\x03\x082\x80\x10\xca(\xa3\xc1' read=0
Sent 51 26.737023 26.737023 14: seq: 1d, tmcuart_send oid=6 write=b'\xea\x03H \xe4' read=10
Sent 52 26.741840 26.741840 19: seq: 1e, tmcuart_send oid=6 write=b'\xea\x03h2\x80\x1e\xfa\xef?\xdf' read=0
Sent 53 26.745105 26.745105 14: seq: 1f, tmcuart_send oid=6 write=b'\xea\x03H \xe4' read=10
Sent 54 26.749916 26.749916 19: seq: 10, tmcuart_send oid=6 write=b'\xea\x03\x08>\xe4\x1ar\x88\xa4\x85' read=0
Sent 55 26.752980 26.752980 14: seq: 11, tmcuart_send oid=6 write=b'\xea\x03H \xe4' read=10
Sent 56 26.757830 26.757830 19: seq: 12, tmcuart_send oid=6 write=b'\xea\x03(2\x80\x00\x02\x88"\xf3' read=0
Sent 57 26.761019 26.761019 14: seq: 13, tmcuart_send oid=6 write=b'\xea\x03H \xe4' read=10
Sent 58 26.765900 26.765900 19: seq: 14, tmcuart_send oid=6 write=b'\xea\x03\x088\x80\x00\x02\x08 \xba' read=0
Sent 59 26.768908 26.768908 14: seq: 15, tmcuart_send oid=6 write=b'\xea\x03H \xe4' read=10
Sent 60 26.785567 26.785567 18: seq: 16, neopixel_update oid=9 pos=0 data=b'\x1a\x80\x00\x1a\x80\x00\x1a\x80\x00'
Sent 61 26.791326 26.791326 7: seq: 17, neopixel_send oid=9
Sent 62 26.792526 26.792526 7: seq: 18, stepper_get_position oid=10
Sent 63 26.795247 26.795247 14: seq: 19, tmcuart_send oid=1 write=b'\xea\x03H-\xd5' read=10
Sent 64 26.801007 26.801007 7: seq: 1a, stepper_get_position oid=13
Sent 65 26.801968 26.801968 14: seq: 1b, tmcuart_send oid=2 write=b'\xea\x03H-\xd5' read=10
Sent 66 26.806838 26.806838 7: seq: 1c, stepper_get_position oid=16
Sent 67 26.807607 26.807607 14: seq: 1d, tmcuart_send oid=3 write=b'\xea\x03H-\xd5' read=10
Sent 68 26.812373 26.812373 7: seq: 1e, stepper_get_position oid=17
Sent 69 26.813209 26.813209 14: seq: 1f, tmcuart_send oid=4 write=b'\xea\x03H-\xd5' read=10
Sent 70 26.817966 26.817966 7: seq: 10, stepper_get_position oid=18
Sent 71 26.818939 26.818939 14: seq: 11, tmcuart_send oid=5 write=b'\xea\x03H-\xd5' read=10
Sent 72 26.823779 26.823779 7: seq: 12, stepper_get_position oid=19
Sent 73 26.824795 26.824795 14: seq: 13, tmcuart_send oid=6 write=b'\xea\x03H-\xd5' read=10
Sent 74 27.704258 27.704258 6: seq: 14, get_clock
Sent 75 27.838458 27.838458 18: seq: 15, neopixel_update oid=9 pos=0 data=b'\xff\xff\xff\xff\xff\xff\xff\xff\xff'
Sent 76 28.091590 28.091590 7: seq: 16, neopixel_send oid=9
Sent 77 28.688821 28.688821 6: seq: 17, get_clock
Sent 78 29.673670 29.673670 6: seq: 18, get_clock
Sent 79 30.658487 30.658487 6: seq: 19, get_clock
Sent 80 31.643146 31.643146 6: seq: 1a, get_clock
Sent 81 32.627551 32.627551 6: seq: 1b, get_clock
Sent 82 33.611732 33.611732 6: seq: 1c, get_clock
Sent 83 34.596385 34.596385 6: seq: 1d, get_clock
Sent 84 35.580817 35.580817 6: seq: 1e, get_clock
Sent 85 36.565768 36.565768 6: seq: 1f, get_clock
Sent 86 37.550520 37.550520 6: seq: 10, get_clock
Sent 87 38.535212 38.535212 6: seq: 11, get_clock
Sent 88 39.519956 39.519956 6: seq: 12, get_clock
Sent 89 40.504772 40.504772 6: seq: 13, get_clock
Sent 90 41.489532 41.489532 6: seq: 14, get_clock
Sent 91 42.474477 42.474477 6: seq: 15, get_clock
Sent 92 43.458939 43.458939 6: seq: 16, get_clock
Sent 93 44.443661 44.443661 6: seq: 17, get_clock
Sent 94 45.428594 45.428594 6: seq: 18, get_clock
Sent 95 46.413867 46.413867 6: seq: 19, get_clock
Sent 96 47.397724 47.397724 6: seq: 1a, get_clock
Sent 97 48.382184 48.382184 6: seq: 1b, get_clock
Sent 98 49.366885 49.366885 6: seq: 1c, get_clock
Sent 99 49.850682 49.850682 6: seq: 1d, emergency_stop
Dumping receive queue 100 messages
Receive: 0 41.120238 40.504772 14: seq: 14, analog_in_state oid=23 next_clock=109465408 value=31618
Receive: 1 41.400325 40.504772 13: seq: 14, analog_in_state oid=21 next_clock=159865408 value=7456
Receive: 2 41.410274 40.504772 14: seq: 14, analog_in_state oid=22 next_clock=161665408 value=31595
Receive: 3 41.420283 40.504772 14: seq: 14, analog_in_state oid=23 next_clock=163465408 value=31620
Receive: 4 41.489702 41.489532 10: seq: 15, clock clock=123256190
Receive: 5 41.700289 41.489532 14: seq: 15, analog_in_state oid=21 next_clock=213865408 value=7455
Receive: 6 41.710235 41.489532 15: seq: 15, analog_in_state oid=22 next_clock=215665408 value=31593
Receive: 7 41.720262 41.489532 15: seq: 15, analog_in_state oid=23 next_clock=217465408 value=31620
Receive: 8 42.000292 41.489532 14: seq: 15, analog_in_state oid=21 next_clock=267865408 value=7457
Receive: 9 42.010252 41.489532 15: seq: 15, analog_in_state oid=22 next_clock=269665408 value=31593
Receive: 10 42.020252 41.489532 15: seq: 15, analog_in_state oid=23 next_clock=271465408 value=31627
Receive: 11 42.300308 41.489532 14: seq: 15, analog_in_state oid=21 next_clock=321865408 value=7456
Receive: 12 42.310241 41.489532 15: seq: 15, analog_in_state oid=22 next_clock=323665408 value=31597
Receive: 13 42.320247 41.489532 15: seq: 15, analog_in_state oid=23 next_clock=325465408 value=31617
Receive: 14 42.474656 42.474477 11: seq: 16, clock clock=300547168
Receive: 15 42.600271 42.474477 14: seq: 16, analog_in_state oid=21 next_clock=375865408 value=7454
Receive: 16 42.610249 42.474477 15: seq: 16, analog_in_state oid=22 next_clock=377665408 value=31598
Receive: 17 42.620237 42.474477 15: seq: 16, analog_in_state oid=23 next_clock=379465408 value=31622
Receive: 18 42.900288 42.474477 14: seq: 16, analog_in_state oid=21 next_clock=429865408 value=7455
Receive: 19 42.910273 42.474477 15: seq: 16, analog_in_state oid=22 next_clock=431665408 value=31595
Receive: 20 42.920262 42.474477 15: seq: 16, analog_in_state oid=23 next_clock=433465408 value=31626
Receive: 21 43.183099 42.474477 14: seq: 16, stats count=163 sum=129030 sumsq=701006
Receive: 22 43.200247 42.474477 14: seq: 16, analog_in_state oid=21 next_clock=483865408 value=7454
Receive: 23 43.210214 42.474477 15: seq: 16, analog_in_state oid=22 next_clock=485665408 value=31597
Receive: 24 43.220219 42.474477 15: seq: 16, analog_in_state oid=23 next_clock=487465408 value=31623
Receive: 25 43.459103 43.458939 11: seq: 17, clock clock=477751682
Receive: 26 43.500259 43.458939 14: seq: 17, analog_in_state oid=21 next_clock=537865408 value=7459
Receive: 27 43.510253 43.458939 15: seq: 17, analog_in_state oid=22 next_clock=539665408 value=31598
Receive: 28 43.520223 43.458939 15: seq: 17, analog_in_state oid=23 next_clock=541465408 value=31623
Receive: 29 43.800273 43.458939 14: seq: 17, analog_in_state oid=21 next_clock=591865408 value=7458
Receive: 30 43.810266 43.458939 15: seq: 17, analog_in_state oid=22 next_clock=593665408 value=31592
Receive: 31 43.820229 43.458939 15: seq: 17, analog_in_state oid=23 next_clock=595465408 value=31624
Receive: 32 44.100373 43.458939 14: seq: 17, analog_in_state oid=21 next_clock=645865408 value=7452
Receive: 33 44.110293 43.458939 15: seq: 17, analog_in_state oid=22 next_clock=647665408 value=31591
Receive: 34 44.120357 43.458939 15: seq: 17, analog_in_state oid=23 next_clock=649465408 value=31624
Receive: 35 44.400348 43.458939 14: seq: 17, analog_in_state oid=21 next_clock=699865408 value=7459
Receive: 36 44.410273 43.458939 15: seq: 17, analog_in_state oid=22 next_clock=701665408 value=31595
Receive: 37 44.420294 43.458939 15: seq: 17, analog_in_state oid=23 next_clock=703465408 value=31622
Receive: 38 44.443949 44.443661 11: seq: 18, clock clock=655007950
Receive: 39 44.700331 44.443661 14: seq: 18, analog_in_state oid=21 next_clock=753865408 value=7458
Receive: 40 44.711101 44.443661 15: seq: 18, analog_in_state oid=22 next_clock=755665408 value=31592
Receive: 41 44.720336 44.443661 15: seq: 18, analog_in_state oid=23 next_clock=757465408 value=31618
Receive: 42 45.000343 44.443661 14: seq: 18, analog_in_state oid=21 next_clock=807865408 value=7457
Receive: 43 45.010294 44.443661 15: seq: 18, analog_in_state oid=22 next_clock=809665408 value=31592
Receive: 44 45.020312 44.443661 15: seq: 18, analog_in_state oid=23 next_clock=811465408 value=31622
Receive: 45 45.300434 44.443661 14: seq: 18, analog_in_state oid=21 next_clock=861865408 value=7457
Receive: 46 45.310296 44.443661 15: seq: 18, analog_in_state oid=22 next_clock=863665408 value=31596
Receive: 47 45.320284 44.443661 15: seq: 18, analog_in_state oid=23 next_clock=865465408 value=31624
Receive: 48 45.428975 45.428594 11: seq: 19, clock clock=832317193
Receive: 49 45.600336 45.428594 14: seq: 19, analog_in_state oid=21 next_clock=915865408 value=7458
Receive: 50 45.610325 45.428594 15: seq: 19, analog_in_state oid=22 next_clock=917665408 value=31597
Receive: 51 45.620281 45.428594 15: seq: 19, analog_in_state oid=23 next_clock=919465408 value=31621
Receive: 52 45.900326 45.428594 14: seq: 19, analog_in_state oid=21 next_clock=969865408 value=7456
Receive: 53 45.910313 45.428594 15: seq: 19, analog_in_state oid=22 next_clock=971665408 value=31598
Receive: 54 45.920304 45.428594 15: seq: 19, analog_in_state oid=23 next_clock=973465408 value=31621
Receive: 55 46.200331 45.428594 14: seq: 19, analog_in_state oid=21 next_clock=1023865408 value=7457
Receive: 56 46.210267 45.428594 15: seq: 19, analog_in_state oid=22 next_clock=1025665408 value=31592
Receive: 57 46.220332 45.428594 15: seq: 19, analog_in_state oid=23 next_clock=1027465408 value=31622
Receive: 58 46.414225 46.413867 11: seq: 1a, clock clock=1009647771
Receive: 59 46.500345 46.413867 14: seq: 1a, analog_in_state oid=21 next_clock=1077865408 value=7460
Receive: 60 46.510288 46.413867 15: seq: 1a, analog_in_state oid=22 next_clock=1079665408 value=31601
Receive: 61 46.520320 46.413867 15: seq: 1a, analog_in_state oid=23 next_clock=1081465408 value=31627
Receive: 62 46.800799 46.413867 14: seq: 1a, analog_in_state oid=21 next_clock=1131865408 value=7457
Receive: 63 46.810386 46.413867 15: seq: 1a, analog_in_state oid=22 next_clock=1133665408 value=31595
Receive: 64 46.820285 46.413867 15: seq: 1a, analog_in_state oid=23 next_clock=1135465408 value=31624
Receive: 65 47.100349 46.413867 14: seq: 1a, analog_in_state oid=21 next_clock=1185865408 value=7458
Receive: 66 47.110331 46.413867 15: seq: 1a, analog_in_state oid=22 next_clock=1187665408 value=31597
Receive: 67 47.120246 46.413867 15: seq: 1a, analog_in_state oid=23 next_clock=1189465408 value=31623
Receive: 68 47.398017 47.397724 11: seq: 1b, clock clock=1186743246
Receive: 69 47.400255 47.397724 14: seq: 1b, analog_in_state oid=21 next_clock=1239865408 value=7458
Receive: 70 47.410331 47.397724 15: seq: 1b, analog_in_state oid=22 next_clock=1241665408 value=31591
Receive: 71 47.420282 47.397724 15: seq: 1b, analog_in_state oid=23 next_clock=1243465408 value=31625
Receive: 72 47.700322 47.397724 14: seq: 1b, analog_in_state oid=21 next_clock=1293865408 value=7458
Receive: 73 47.710333 47.397724 15: seq: 1b, analog_in_state oid=22 next_clock=1295665408 value=31596
Receive: 74 47.720264 47.397724 15: seq: 1b, analog_in_state oid=23 next_clock=1297465408 value=31621
Receive: 75 48.000338 47.397724 14: seq: 1b, analog_in_state oid=21 next_clock=1347865408 value=7458
Receive: 76 48.010443 47.397724 15: seq: 1b, analog_in_state oid=22 next_clock=1349665408 value=31595
Receive: 77 48.020286 47.397724 15: seq: 1b, analog_in_state oid=23 next_clock=1351465408 value=31627
Receive: 78 48.283142 47.397724 14: seq: 1b, stats count=164 sum=131074 sumsq=718459
Receive: 79 48.300326 47.397724 14: seq: 1b, analog_in_state oid=21 next_clock=1401865408 value=7459
Receive: 80 48.310548 47.397724 15: seq: 1b, analog_in_state oid=22 next_clock=1403665408 value=31598
Receive: 81 48.320270 47.397724 15: seq: 1b, analog_in_state oid=23 next_clock=1405465408 value=31626
Receive: 82 48.382498 48.382184 11: seq: 1c, clock clock=1363947940
Receive: 83 48.600329 48.382184 14: seq: 1c, analog_in_state oid=21 next_clock=1455865408 value=7460
Receive: 84 48.610294 48.382184 15: seq: 1c, analog_in_state oid=22 next_clock=1457665408 value=31597
Receive: 85 48.620294 48.382184 15: seq: 1c, analog_in_state oid=23 next_clock=1459465408 value=31624
Receive: 86 48.900290 48.382184 14: seq: 1c, analog_in_state oid=21 next_clock=1509865408 value=7455
Receive: 87 48.910301 48.382184 15: seq: 1c, analog_in_state oid=22 next_clock=1511665408 value=31593
Receive: 88 48.920257 48.382184 15: seq: 1c, analog_in_state oid=23 next_clock=1513465408 value=31620
Receive: 89 49.200269 48.382184 14: seq: 1c, analog_in_state oid=21 next_clock=1563865408 value=7454
Receive: 90 49.210250 48.382184 15: seq: 1c, analog_in_state oid=22 next_clock=1565665408 value=31595
Receive: 91 49.220266 48.382184 15: seq: 1c, analog_in_state oid=23 next_clock=1567465408 value=31624
Receive: 92 49.367197 49.366885 11: seq: 1d, clock clock=1541196809
Receive: 93 49.500305 49.366885 14: seq: 1d, analog_in_state oid=21 next_clock=1617865408 value=7461
Receive: 94 49.510284 49.366885 15: seq: 1d, analog_in_state oid=22 next_clock=1619665408 value=31596
Receive: 95 49.520301 49.366885 15: seq: 1d, analog_in_state oid=23 next_clock=1621465408 value=31623
Receive: 96 49.800341 49.366885 14: seq: 1d, analog_in_state oid=21 next_clock=1671865408 value=7455
Receive: 97 49.810410 49.366885 15: seq: 1d, analog_in_state oid=22 next_clock=1673665408 value=31599
Receive: 98 49.820309 49.366885 15: seq: 1d, analog_in_state oid=23 next_clock=1675465408 value=31625
Receive: 99 49.851066 49.850682 12: seq: 1e, shutdown clock=1628281491 static_string_id=Command request
Stats 50.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3436 bytes_read=10353 bytes_retransmit=9 bytes_invalid=0 send_seq=303 receive_seq=303 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001512 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1507 bytes_read=5862 bytes_retransmit=73 bytes_invalid=0 send_seq=160 receive_seq=153 retransmit_seq=157 srtt=0.001 rttvar=0.000 rto=3.200 ready_bytes=0 upcoming_bytes=0 freq=63999829 adj=63999104  raspberry_pi: temp=36.5 controller: temp=24.4 chamber: temp=19.4 heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.48 cputime=2.923 memavail=7521784 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 51.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3442 bytes_read=10501 bytes_retransmit=9 bytes_invalid=0 send_seq=304 receive_seq=304 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001474 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1513 bytes_read=5862 bytes_retransmit=122 bytes_invalid=0 send_seq=161 receive_seq=153 retransmit_seq=161 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=0 freq=63999829 adj=63999233  raspberry_pi: temp=37.0 controller: temp=24.3 chamber: temp=19.3 heater_bed: target=0 temp=18.8 pwm=0.000 sysload=0.48 cputime=2.934 memavail=7521532 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 52.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3448 bytes_read=10693 bytes_retransmit=9 bytes_invalid=0 send_seq=305 receive_seq=305 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001563 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1519 bytes_read=5862 bytes_retransmit=122 bytes_invalid=0 send_seq=162 receive_seq=153 retransmit_seq=161 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=0 freq=63999829 adj=63999338  raspberry_pi: temp=36.5 controller: temp=24.3 chamber: temp=19.4 heater_bed: target=0 temp=18.8 pwm=0.000 sysload=0.48 cputime=2.946 memavail=7520536 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 53.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3454 bytes_read=10855 bytes_retransmit=9 bytes_invalid=0 send_seq=306 receive_seq=306 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001602 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1525 bytes_read=5862 bytes_retransmit=122 bytes_invalid=0 send_seq=163 receive_seq=153 retransmit_seq=161 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=0 freq=63999829 adj=63999110  raspberry_pi: temp=36.5 controller: temp=24.3 chamber: temp=19.4 heater_bed: target=0 temp=18.8 pwm=0.000 sysload=0.48 cputime=2.957 memavail=7520068 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 54.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3460 bytes_read=11003 bytes_retransmit=9 bytes_invalid=0 send_seq=307 receive_seq=307 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001566 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1531 bytes_read=5862 bytes_retransmit=122 bytes_invalid=0 send_seq=164 receive_seq=153 retransmit_seq=161 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=0 freq=63999829 adj=63999051  raspberry_pi: temp=37.0 controller: temp=24.3 chamber: temp=19.4 heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.48 cputime=2.968 memavail=7520072 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 55.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3466 bytes_read=11195 bytes_retransmit=9 bytes_invalid=0 send_seq=308 receive_seq=308 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001543 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1537 bytes_read=5862 bytes_retransmit=122 bytes_invalid=0 send_seq=165 receive_seq=153 retransmit_seq=161 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=1 freq=63999829 adj=63999197  raspberry_pi: temp=38.0 controller: temp=24.6 chamber: temp=19.4 heater_bed: target=0 temp=18.8 pwm=0.000 sysload=0.44 cputime=2.987 memavail=7523088 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 56.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3472 bytes_read=11343 bytes_retransmit=9 bytes_invalid=0 send_seq=309 receive_seq=309 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001538 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1537 bytes_read=5862 bytes_retransmit=195 bytes_invalid=0 send_seq=165 receive_seq=153 retransmit_seq=165 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=2 freq=63999829 adj=63999278  raspberry_pi: temp=36.5 controller: temp=24.3 chamber: temp=19.4 heater_bed: target=0 temp=18.8 pwm=0.000 sysload=0.44 cputime=3.009 memavail=7522640 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 57.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3478 bytes_read=11491 bytes_retransmit=9 bytes_invalid=0 send_seq=310 receive_seq=310 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001528 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1537 bytes_read=5862 bytes_retransmit=195 bytes_invalid=0 send_seq=165 receive_seq=153 retransmit_seq=165 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=3 freq=63999829 adj=63999291  raspberry_pi: temp=36.5 controller: temp=24.3 chamber: temp=19.4 heater_bed: target=0 temp=18.7 pwm=0.000 sysload=0.44 cputime=3.031 memavail=7522392 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 58.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3484 bytes_read=11697 bytes_retransmit=9 bytes_invalid=0 send_seq=311 receive_seq=311 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001509 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1537 bytes_read=5862 bytes_retransmit=195 bytes_invalid=0 send_seq=165 receive_seq=153 retransmit_seq=165 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=4 freq=63999829 adj=63999316  raspberry_pi: temp=36.0 controller: temp=24.3 chamber: temp=19.5 heater_bed: target=0 temp=18.8 pwm=0.000 sysload=0.44 cputime=3.054 memavail=7522140 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 59.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3490 bytes_read=11845 bytes_retransmit=9 bytes_invalid=0 send_seq=312 receive_seq=312 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001535 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1537 bytes_read=5862 bytes_retransmit=195 bytes_invalid=0 send_seq=165 receive_seq=153 retransmit_seq=165 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=5 freq=63999829 adj=63999364  raspberry_pi: temp=36.5 controller: temp=24.3 chamber: temp=19.4 heater_bed: target=0 temp=18.8 pwm=0.000 sysload=0.44 cputime=3.075 memavail=7521924 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 60.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3496 bytes_read=11993 bytes_retransmit=9 bytes_invalid=0 send_seq=313 receive_seq=313 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001524 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1537 bytes_read=5862 bytes_retransmit=195 bytes_invalid=0 send_seq=165 receive_seq=153 retransmit_seq=165 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=6 freq=63999829 adj=63999270  raspberry_pi: temp=35.0 controller: temp=24.5 chamber: temp=19.5 heater_bed: target=0 temp=18.8 pwm=0.000 sysload=0.41 cputime=3.096 memavail=7521676 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 61.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3502 bytes_read=12185 bytes_retransmit=9 bytes_invalid=0 send_seq=314 receive_seq=314 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001521 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1537 bytes_read=5862 bytes_retransmit=268 bytes_invalid=0 send_seq=165 receive_seq=153 retransmit_seq=165 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=7 freq=63999829 adj=63999306  raspberry_pi: temp=35.0 controller: temp=24.4 chamber: temp=19.4 heater_bed: target=0 temp=18.8 pwm=0.000 sysload=0.41 cputime=3.118 memavail=7521676 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 62.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3508 bytes_read=12333 bytes_retransmit=9 bytes_invalid=0 send_seq=315 receive_seq=315 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001519 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1537 bytes_read=5862 bytes_retransmit=268 bytes_invalid=0 send_seq=165 receive_seq=153 retransmit_seq=165 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=8 freq=63999829 adj=63999310  raspberry_pi: temp=35.5 controller: temp=24.4 chamber: temp=19.3 heater_bed: target=0 temp=18.8 pwm=0.000 sysload=0.41 cputime=3.140 memavail=7521676 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 63.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3514 bytes_read=12495 bytes_retransmit=9 bytes_invalid=0 send_seq=316 receive_seq=316 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001518 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1537 bytes_read=5862 bytes_retransmit=268 bytes_invalid=0 send_seq=165 receive_seq=153 retransmit_seq=165 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=9 freq=63999829 adj=63999309  raspberry_pi: temp=35.5 controller: temp=24.4 chamber: temp=19.4 heater_bed: target=0 temp=18.7 pwm=0.000 sysload=0.41 cputime=3.157 memavail=7520636 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 64.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3520 bytes_read=12678 bytes_retransmit=9 bytes_invalid=0 send_seq=317 receive_seq=317 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001502 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1537 bytes_read=5862 bytes_retransmit=268 bytes_invalid=0 send_seq=165 receive_seq=153 retransmit_seq=165 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=10 freq=63999829 adj=63999309  raspberry_pi: temp=37.5 controller: temp=24.5 chamber: temp=19.4 heater_bed: target=0 temp=18.7 pwm=0.000 sysload=0.41 cputime=3.169 memavail=7519404 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 65.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3526 bytes_read=12819 bytes_retransmit=9 bytes_invalid=0 send_seq=318 receive_seq=318 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001554 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1537 bytes_read=5862 bytes_retransmit=268 bytes_invalid=0 send_seq=165 receive_seq=153 retransmit_seq=165 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=11 freq=63999829 adj=63999355  raspberry_pi: temp=37.0 controller: temp=24.4 chamber: temp=19.5 heater_bed: target=0 temp=18.8 pwm=0.000 sysload=0.37 cputime=3.180 memavail=7519412 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 66.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3532 bytes_read=12967 bytes_retransmit=9 bytes_invalid=0 send_seq=319 receive_seq=319 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001530 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1537 bytes_read=5862 bytes_retransmit=341 bytes_invalid=0 send_seq=165 receive_seq=153 retransmit_seq=165 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=12 freq=63999829 adj=63999173  raspberry_pi: temp=38.0 controller: temp=24.5 chamber: temp=19.4 heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.37 cputime=3.192 memavail=7519416 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 67.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3538 bytes_read=13159 bytes_retransmit=9 bytes_invalid=0 send_seq=320 receive_seq=320 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001505 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1537 bytes_read=5862 bytes_retransmit=341 bytes_invalid=0 send_seq=165 receive_seq=153 retransmit_seq=165 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=13 freq=63999829 adj=63999278  raspberry_pi: temp=37.0 controller: temp=24.5 chamber: temp=19.4 heater_bed: target=0 temp=18.7 pwm=0.000 sysload=0.37 cputime=3.204 memavail=7519416 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 68.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3544 bytes_read=13321 bytes_retransmit=9 bytes_invalid=0 send_seq=321 receive_seq=321 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001489 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1537 bytes_read=5862 bytes_retransmit=341 bytes_invalid=0 send_seq=165 receive_seq=153 retransmit_seq=165 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=14 freq=63999829 adj=63999360  raspberry_pi: temp=36.5 controller: temp=24.5 chamber: temp=19.4 heater_bed: target=0 temp=18.7 pwm=0.000 sysload=0.37 cputime=3.220 memavail=7519168 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 69.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3550 bytes_read=13469 bytes_retransmit=9 bytes_invalid=0 send_seq=322 receive_seq=322 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001491 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1537 bytes_read=5862 bytes_retransmit=341 bytes_invalid=0 send_seq=165 receive_seq=153 retransmit_seq=165 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=15 freq=63999829 adj=63999398  raspberry_pi: temp=37.0 controller: temp=24.5 chamber: temp=19.5 heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.37 cputime=3.242 memavail=7519168 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 70.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3556 bytes_read=13661 bytes_retransmit=9 bytes_invalid=0 send_seq=323 receive_seq=323 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001487 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1537 bytes_read=5862 bytes_retransmit=341 bytes_invalid=0 send_seq=165 receive_seq=153 retransmit_seq=165 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=16 freq=63999829 adj=63999368  raspberry_pi: temp=37.5 controller: temp=24.6 chamber: temp=19.4 heater_bed: target=0 temp=18.8 pwm=0.000 sysload=0.34 cputime=3.263 memavail=7519168 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 71.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3562 bytes_read=13809 bytes_retransmit=9 bytes_invalid=0 send_seq=324 receive_seq=324 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001485 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1537 bytes_read=5862 bytes_retransmit=414 bytes_invalid=0 send_seq=165 receive_seq=153 retransmit_seq=165 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=17 freq=63999829 adj=63999363  raspberry_pi: temp=37.5 controller: temp=24.5 chamber: temp=19.5 heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.34 cputime=3.282 memavail=7519168 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 72.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3568 bytes_read=13957 bytes_retransmit=9 bytes_invalid=0 send_seq=325 receive_seq=325 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001480 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1537 bytes_read=5862 bytes_retransmit=414 bytes_invalid=0 send_seq=165 receive_seq=153 retransmit_seq=165 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=18 freq=63999829 adj=63999355  raspberry_pi: temp=37.0 controller: temp=24.5 chamber: temp=19.5 heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.34 cputime=3.303 memavail=7519180 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 73.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3574 bytes_read=14163 bytes_retransmit=9 bytes_invalid=0 send_seq=326 receive_seq=326 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001486 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1537 bytes_read=5862 bytes_retransmit=414 bytes_invalid=0 send_seq=165 receive_seq=153 retransmit_seq=165 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=19 freq=63999829 adj=63999359  raspberry_pi: temp=37.0 controller: temp=24.6 chamber: temp=19.4 heater_bed: target=0 temp=18.8 pwm=0.000 sysload=0.34 cputime=3.326 memavail=7519180 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 74.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3580 bytes_read=14311 bytes_retransmit=9 bytes_invalid=0 send_seq=327 receive_seq=327 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001496 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1537 bytes_read=5862 bytes_retransmit=414 bytes_invalid=0 send_seq=165 receive_seq=153 retransmit_seq=165 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=20 freq=63999829 adj=63999325  raspberry_pi: temp=36.0 controller: temp=24.5 chamber: temp=19.5 heater_bed: target=0 temp=18.8 pwm=0.000 sysload=0.34 cputime=3.346 memavail=7518828 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 75.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3586 bytes_read=14459 bytes_retransmit=9 bytes_invalid=0 send_seq=328 receive_seq=328 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001489 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1537 bytes_read=5862 bytes_retransmit=414 bytes_invalid=0 send_seq=165 receive_seq=153 retransmit_seq=165 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=21 freq=63999829 adj=63999281  raspberry_pi: temp=37.0 controller: temp=24.6 chamber: temp=19.4 heater_bed: target=0 temp=18.7 pwm=0.000 sysload=0.31 cputime=3.366 memavail=7518932 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 76.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3592 bytes_read=14651 bytes_retransmit=9 bytes_invalid=0 send_seq=329 receive_seq=329 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001486 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1537 bytes_read=5862 bytes_retransmit=487 bytes_invalid=0 send_seq=165 receive_seq=153 retransmit_seq=165 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=22 freq=63999829 adj=63999311  raspberry_pi: temp=37.0 controller: temp=24.6 chamber: temp=19.5 heater_bed: target=0 temp=18.8 pwm=0.000 sysload=0.31 cputime=3.388 memavail=7518708 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 77.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3598 bytes_read=14799 bytes_retransmit=9 bytes_invalid=0 send_seq=330 receive_seq=330 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001495 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1537 bytes_read=5862 bytes_retransmit=487 bytes_invalid=0 send_seq=165 receive_seq=153 retransmit_seq=165 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=23 freq=63999829 adj=63999321  raspberry_pi: temp=36.5 controller: temp=24.7 chamber: temp=19.4 heater_bed: target=0 temp=18.8 pwm=0.000 sysload=0.31 cputime=3.409 memavail=7518708 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 78.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3604 bytes_read=14961 bytes_retransmit=9 bytes_invalid=0 send_seq=331 receive_seq=331 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001490 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1537 bytes_read=5862 bytes_retransmit=487 bytes_invalid=0 send_seq=165 receive_seq=153 retransmit_seq=165 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=24 freq=63999829 adj=63999279  raspberry_pi: temp=36.5 controller: temp=24.6 chamber: temp=19.5 heater_bed: target=0 temp=18.8 pwm=0.000 sysload=0.31 cputime=3.430 memavail=7518708 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 79.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3610 bytes_read=15153 bytes_retransmit=9 bytes_invalid=0 send_seq=332 receive_seq=332 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001482 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1537 bytes_read=5862 bytes_retransmit=487 bytes_invalid=0 send_seq=165 receive_seq=153 retransmit_seq=165 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=25 freq=63999829 adj=63999306  raspberry_pi: temp=36.0 controller: temp=24.7 chamber: temp=19.5 heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.31 cputime=3.452 memavail=7518708 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 80.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3616 bytes_read=15301 bytes_retransmit=9 bytes_invalid=0 send_seq=333 receive_seq=333 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001479 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1537 bytes_read=5862 bytes_retransmit=487 bytes_invalid=0 send_seq=165 receive_seq=153 retransmit_seq=165 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=26 freq=63999829 adj=63999332  raspberry_pi: temp=36.5 controller: temp=24.7 chamber: temp=19.4 heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.29 cputime=3.473 memavail=7518708 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 81.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3628 bytes_read=15465 bytes_retransmit=9 bytes_invalid=0 send_seq=335 receive_seq=335 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001485 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1537 bytes_read=5862 bytes_retransmit=560 bytes_invalid=0 send_seq=165 receive_seq=153 retransmit_seq=165 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=27 freq=63999829 adj=63999340  raspberry_pi: temp=37.0 controller: temp=24.7 chamber: temp=19.4 heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.29 cputime=3.496 memavail=7518708 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 82.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3634 bytes_read=15657 bytes_retransmit=9 bytes_invalid=0 send_seq=336 receive_seq=336 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001484 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1537 bytes_read=5862 bytes_retransmit=560 bytes_invalid=0 send_seq=165 receive_seq=153 retransmit_seq=165 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=28 freq=63999829 adj=63999306  raspberry_pi: temp=36.5 controller: temp=24.7 chamber: temp=19.5 heater_bed: target=0 temp=18.8 pwm=0.000 sysload=0.29 cputime=3.517 memavail=7518708 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 83.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3640 bytes_read=15819 bytes_retransmit=9 bytes_invalid=0 send_seq=337 receive_seq=337 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001525 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1537 bytes_read=5862 bytes_retransmit=560 bytes_invalid=0 send_seq=165 receive_seq=153 retransmit_seq=165 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=29 freq=63999829 adj=63999309  raspberry_pi: temp=36.0 controller: temp=24.8 chamber: temp=19.5 heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.29 cputime=3.538 memavail=7518708 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 84.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3646 bytes_read=15967 bytes_retransmit=9 bytes_invalid=0 send_seq=338 receive_seq=338 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001522 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1537 bytes_read=5862 bytes_retransmit=560 bytes_invalid=0 send_seq=165 receive_seq=153 retransmit_seq=165 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=30 freq=63999829 adj=63999144  raspberry_pi: temp=37.0 controller: temp=24.8 chamber: temp=19.5 heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.29 cputime=3.559 memavail=7518268 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 85.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3652 bytes_read=16159 bytes_retransmit=9 bytes_invalid=0 send_seq=339 receive_seq=339 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001518 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1537 bytes_read=5862 bytes_retransmit=560 bytes_invalid=0 send_seq=165 receive_seq=153 retransmit_seq=165 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=31 freq=63999829 adj=63999192  raspberry_pi: temp=35.5 controller: temp=24.7 chamber: temp=19.4 heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.27 cputime=3.583 memavail=7518284 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 86.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3658 bytes_read=16307 bytes_retransmit=9 bytes_invalid=0 send_seq=340 receive_seq=340 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001528 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1537 bytes_read=5862 bytes_retransmit=633 bytes_invalid=0 send_seq=165 receive_seq=153 retransmit_seq=165 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=32 freq=63999829 adj=63999232  raspberry_pi: temp=36.5 controller: temp=24.7 chamber: temp=19.6 heater_bed: target=0 temp=18.9 pwm=0.000 sysload=0.27 cputime=3.605 memavail=7518284 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000
Stats 87.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=3664 bytes_read=16455 bytes_retransmit=9 bytes_invalid=0 send_seq=341 receive_seq=341 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=180001521 SB2240: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1537 bytes_read=5862 bytes_retransmit=633 bytes_invalid=0 send_seq=165 receive_seq=153 retransmit_seq=165 srtt=0.001 rttvar=0.000 rto=5.000 ready_bytes=0 upcoming_bytes=33 freq=63999829 adj=63999204  raspberry_pi: temp=36.5 controller: temp=24.6 chamber: temp=19.4 heater_bed: target=0 temp=19.0 pwm=0.000 sysload=0.27 cputime=3.626 memavail=7518284 print_time=35.005 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.8 pwm=0.000