=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.02.12 15:14:14 =~=~=~=~=~=~=~=~=~=~=~=
**********Aos DebugSemiHosting Initialized*******
---------------------------------------------------
ADJUSTED CLOCKS:
MC clock is set to 333000 KHz
EMC clock is set to 666000 KHz (DDR clock is at 333000 KHz)
PLLX0 clock is set to 1000000 KHz
PLLC0 clock is set to 600000 KHz
CPU clock is set to 1000000 KHz
System and AVP clock is set to 240000 KHz
GraphicsHost clock is set to 108000 KHz
3D clock is set to 111000 KHz
2D clock is set to 111000 KHz
Epp clock is set to 111000 KHz
Mpe clock is set to 111000 KHz
Vde clock is set to 240000 KHz
DTT: TMON initialization failed

Global Nand Interleave count = 1
UpdateDevice Command=0
UpdateDevice 1 Command=0
UpdateDevice 2 Command=0, StagingPartitionId=-1
UpdateDevice 3 Command=0
Uncompressing Linux... done, booting the kernel.
<6>Initializing cgroup subsys cpu

<5>Linux version 3.1.10-DRH-FOSS-3.1+ (andrew@ubuntu) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #2 SMP PREEMPT Mon Feb 11 17:56:59 PST 2013

CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d

CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache

Machine: harmony

<6> PreMemHdl 0d‚À œ00000008 1fd95000 00258800 0000000a

<6>FRAMEBUFFER 00000018 00010000 00258800 101a880a 02580400 02010800 00000000 00000007

<6>DISPLAY 0000000c 00000000 00000000 ffffff01 00000006

<6> PreMemHdl 1d‚À œ00000008 1fd79000 00002000 00000016

<6>CHIPSHMOO 00000048 00010001 00000000 00000014 00000014 000005ac 000005c0 00000028

<6>CHIPSHMOO 000005e8 00000028 00000610 00000018 00000628 0000002c 00010002 c435ae6e

<6>CHIPSHMOO 000003f2 00000000 00000000 00000006

<6> PreMemHdl 2d‚À œ00000008 1fd76ff0 00002000 00000005

<6>WARMBOOT 00000004 00010002 00000000

<6>Appending nvmem onto bank 0

<6>Tegra reserved memory:

LP0:                    1fd76ff0 - 1fd78fef

Bootloader framebuffer: 1fd95000 - 1ffedfff

Framebuffer:            16800000 - 177fffff

2nd Framebuffer:        17800000 - 17ffffff

Carveout:               18000000 - 1fffffff

Vpr:                    00000000 - 00000000

Memory policy: ECC disabled, Data cache writealloc

<7>On node 0 totalpages: 92160

<7>free_area_init_node: node 0, pgdat c0853760, node_mem_map c0a2d000

<7>  Normal zone: 1024 pages used for memmap

<7>  Normal zone: 0 pages reserved

<7>  Normal zone: 91136 pages, LIFO batch:31

<6>Tegra SKU: 8 Rev: A03 CPU Process: 1 Core Process: 2 Speedo ID: 1

<6>Tegra Revision: A03 SKU: 0x8 CPU Process: 1 Core Process: 2

<6>L310 cache controller enabled

<6>l2x0: 8 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x7e080001, Cache size: 1048576 B

<6>PERCPU: Embedded 8 pages/cpu @c0e32000 s10304 r8192 d14272 u32768

<7>pcpu-alloc: s10304 r8192 d14272 u32768 alloc=8*4096

<7>pcpu-alloc: [0] 0 [0] 1

Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 91136

<5>Kernel command line: zcache mem=448M@0M nvmem=64M@448M vmalloc=192M video=tegrafb console=ttyS0,115200n8 usbcore.old_scheme_first=1 cpuid=200102 devicetype=1002 bspversion=0202100907 btmac=9c5ed6131a00 tegraboot=nand mtdparts=tegra_nand:16384K@12032K(misc),16384K@62208K(recovery),16384K@79104K(boot),410880K@112896K(system),16384K@96000K(cache),4096K@7424K(bootbmp),32768K@28928K(logodata)

<6>PID hash table entries: 2048 (order: 1, 8192 bytes)

<6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

<6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

<6>Memory: 360MB = 360MB total

<5>Memory: 353452k/353452k available, 170836k reserved, 0K highmem

<5>Virtual kernel memory layout:

    vector  : 0xffff0000 - 0xffff1000   (   4 kB)

    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

    DMA     : 0xff000000 - 0xffe00000   (  14 MB)

    vmalloc : 0xe0800000 - 0xf8000000   ( 376 MB)

    lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)

    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)

    modules : 0xbf000000 - 0xbfe00000   (  14 MB)

      .text : 0xc0008000 - 0xc07d3288   (7981 kB)

      .init : 0xc07d4000 - 0xc0825840   ( 327 kB)

      .data : 0xc0826000 - 0xc08558d0   ( 191 kB)

       .bss : 0xc08b92d8 - 0xc0a2ceb0   (1487 kB)

<6>Preemptible hierarchical RCU implementation.

<6>NR_IRQS:480

<6>sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms

<6>Calibrating delay loop... <c>1987.37 BogoMIPS (lpj=9936896)

<6>pid_max: default: 32768 minimum: 301

<6>Mount-cache hash table entries: 512

<6>Initializing cgroup subsys debug

<6>Initializing cgroup subsys cpuacct

<6>Initializing cgroup subsys freezer

<6>Initializing cgroup subsys bfqio

<6>CPU: Testing write buffer coherency: ok

<6>ftrace: allocating 21183 entries in 63 pages

CPU1: Booted secondary processor

<6>Brought up 2 CPUs

<6>SMP: Total of 2 processors activated (3974.75 BogoMIPS).

<6>print_constraints: dummy:

<6>NET: Registered protocol family 16

<6>host1x bus init

<6>Selecting UARTA as the debug console

<6>The debug console clock name is uarta

<6>smba_audio_register_devices++

<6>tegra_arb_init: initialized

<6>tegra_iovmm_register: added iovmm-gart

<6>bio: create slab <bio-0> at 0

<5>SCSI subsystem initialized

<6>usbcore: registered new interface driver usbfs

<6>usbcore: registered new interface driver hub

<6>usbcore: registered new device driver usb

<6>tegra-otg tegra-otg: otg transceiver registered

<6>tps6586x 4-0034: VERSIONCRC is 05

<6>Wake18 for irq=118

<6>Enabling wake18

<6>print_constraints: REG-SM_0: 725 <--> 1500 mV at 1275 mV normal standby

<6>print_constraints: REG-SM_1: 725 <--> 1500 mV at 1000 mV normal standby

<6>print_constraints: REG-SM_2: 3000 <--> 4550 mV at 3700 mV normal standby

<6>print_constraints: REG-LDO_0: 1500 <--> 3300 mV at 1200 mV normal standby

<6>print_constraints: REG-LDO_1: 725 <--> 1500 mV at 1100 mV normal standby

<6>print_constraints: REG-LDO_2: 725 <--> 1500 mV at 1275 mV normal standby

<6>print_constraints: REG-LDO_3: 1250 <--> 3300 mV at 3300 mV normal standby

<6>print_constraints: REG-LDO_4: 1700 <--> 2475 mV at 1800 mV normal standby

<6>print_constraints: REG-LDO_5: 1250 <--> 3300 mV at 2850 mV normal standby

<6>print_constraints: REG-LDO_6: 1800 mV normal standby

<6>print_constraints: REG-LDO_7: 1250 <--> 3300 mV at 3300 mV normal standby

<6>print_constraints: REG-LDO_8: 1250 <--> 3300 mV at 1800 mV normal standby

<6>print_constraints: REG-LDO_9: 1250 <--> 3300 mV at 2850 mV normal standby

<6>tegra_camera tegra_camera.0: tegra_camera_probe

<4>_regulator_get: tegra_camera.0 supply vcsi not found, using dummy regulator

<6>Advanced Linux Sound Architecture Driver Version 1.0.24.

<6>Bluetooth: Core ver 2.16

<6>NET: Registered protocol family 31

<6>Bluetooth: HCI device and connection manager initialized

<6>Bluetooth: HCI socket layer initialized

<6>Bluetooth: L2CAP socket layer initialized

<6>Bluetooth: SCO socket layer initialized

<6>cfg80211: Calling CRDA to update world regulatory domain

<6>Switching to clocksource timer_us

<6>Switched to NOHz mode on CPU #1

<6>Switched to NOHz mode on CPU #0

<6>nvmap_page_pool_init: nvmap uc page pool size=11045 pages<6>nvmap_page_pool_init: nvmap pool = uc, highmem=0, pool_size=11045,totalram=88363, freeram=76662, totalhigh=0, freehigh=0<6>nvmap_page_pool_init: nvmap wc page pool size=11045 pages<6>nvmap_page_pool_init: nvmap pool = wc, highmem=0, pool_size=11045,totalram=88363, freeram=65564, totalhigh=0, freehigh=0<6>nvmap_page_pool_init: nvmap iwb page pool size=11045 pages<6>nvmap_page_pool_init: nvmap pool = iwb, highmem=0, pool_size=11045,totalram=88363, freeram=54497, totalhigh=0, freehigh=0<6>tegra-nvmap tegra-nvmap: created carveout iram (255KiB)

<6>tegra-nvmap tegra-nvmap: created carveout generic-0 (131072KiB)

<6>NET: Registered protocol family 2

<6>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)

<6>TCP established hash table entries: 16384 (order: 5, 131072 bytes)

<6>TCP bind hash table entries: 16384 (order: 5, 196608 bytes)

<6>TCP: Hash tables configured (established 16384 bind 16384)

<6>TCP reno registered

<6>UDP hash table entries: 256 (order: 1, 8192 bytes)

<6>UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)

<6>NET: Registered protocol family 1

<6>Unpacking initramfs...

<6>Freeing initrd memory: 180K

<6>host1x host1x: initialized

<6>PMU: registered new PMU device of type 0

<6>bcb: registered reboot notifier

<6>ashmem: initialized

<6>NTFS driver 2.1.30 [Flags: R/W].

<6>fuse init (API version 7.17)

<7>yaffs: yaffs built Feb 11 2013 17:56:19 Installing.

<6>io scheduler noop registered

<6>io scheduler deadline registered

<6>io scheduler cfq registered

<6>io scheduler sio registered

<6>io scheduler bfq registered

<6>io scheduler row registered (default)

<6>mpe mpe01: initialized

<6>gr3d gr3d01: initialized

<6>dsi dsi: initialized

<6>gr2d gr2d: initialized

<6>tegradc tegradc.0: probed

<6>tegradc tegradc.0: probed

<6>Wake4 for irq=303

<6>nvhdcp: using "always on" policy.

<6>tegradc tegradc.1: probed

<6>tegradc tegradc.1: probed

<6>tegra_uart.1: ttyHS1 at MMIO 0x70006040 (irq = 69) is a TEGRA_UART

<6>Registered UART port ttyHS1

<6>tegra_uart.2: ttyHS2 at MMIO 0x70006200 (irq = 78) is a TEGRA_UART

<6>Registered UART port ttyHS2

<6>tegra_uart.3: ttyHS3 at MMIO 0x70006300 (irq = 122) is a TEGRA_UART

<6>Registered UART port ttyHS3

<6>tegra_uart.4: ttyHS4 at MMIO 0x70006400 (irq = 123) is a TEGRA_UART

<6>Registered UART port ttyHS4

<6>Initialized tegra uart driver

<6>loop: module loaded

<6>lis3lv02d: 8 bits sensor found

<6>input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input0

<6>tegra_nand: 1 NAND chip(s) found (vend=0xad, dev=0xdc) (Hynix NAND 512MiB 3,3V 8-bit)

<6>tegra_nand: NVIDIA Tegra NAND controller @ base=0x70008000 irq=56.

<5>7 cmdlinepart partitions found on MTD device tegra_nand

<5>Creating 7 MTD partitions on "tegra_nand":

<5>0x000000bc0000-0x000001bc0000 : "misc"

<5>0x000003cc0000-0x000004cc0000 : "recovery"

<5>0x000004d40000-0x000005d40000 : "boot"

<5>0x000006e40000-0x00001ff80000 : "system"

<5>0x000005dc0000-0x000006dc0000 : "cache"

<5>0x000000740000-0x000000b40000 : "bootbmp"

<5>0x000001c40000-0x000003c40000 : "logodata"

<6>PPP generic driver version 2.4.2

<6>PPP Deflate Compression module registered

<6>PPP BSD Compression module registered

<6>PPP MPPE Compression module registered

<6>NET: Registered protocol family 24

<6>usbcore: registered new interface driver asix

<6>usbcore: registered new interface driver cdc_ether

<6>usbcore: registered new interface driver smsc95xx

<6>usbcore: registered new interface driver cdc_subset

<6>cdc_ncm: 04-Aug-2011

<6>usbcore: registered new interface driver cdc_ncm

<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

<6>tegra USB phy - inst[2] platform info:

<6>port_otg: no

<6>has_hostpc: no

<6>phy_interface: USB_PHY_INTF_UTMI

<6>op_mode: TEGRA_USB_OPMODE_HOST

<6>vbus_gpio: -1

<6>vbus_reg: NULL

<6>hot_plug: enabled

<6>remote_wakeup: disabled

<6>tegra-ehci tegra-ehci.2: Tegra EHCI Host Controller

<6>tegra-ehci tegra-ehci.2: new USB bus registered, assigned bus number 1

<6>tegra-ehci tegra-ehci.2: irq 129, io mem 0xc5008000

<6>tegra-ehci tegra-ehci.2: USB 2.0 started, EHCI 1.00

<6>utmi_phy_irq: usb device plugged-in

<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

<6>usb usb1: Product: Tegra EHCI Host Controller

<6>usb usb1: Manufacturer: Linux 3.1.10-DRH-FOSS-3.1+ ehci_hcd

<6>usb usb1: SerialNumber: tegra-ehci.2

<6>hub 1-0:1.0: USB hub found

<6>hub 1-0:1.0: 1 port detected

<4>tegra-ehci tegra-ehci.2: Couldn't enable USB host mode wakeup, irq=129, error=-22

<6>usbcore: registered new interface driver cdc_acm

<6>cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters

<6>usbcore: registered new interface driver cdc_wdm

<6>Initializing USB Mass Storage driver...

<6>usbcore: registered new interface driver usb-storage

<6>USB Mass Storage support registered.

<6>usbcore: registered new interface driver libusual

<6>usbcore: registered new interface driver usbserial

<6>USB Serial support registered for generic

<6>usbcore: registered new interface driver usbserial_generic

<6>usbserial: USB Serial Driver core

<6>USB Serial support registered for FTDI USB Serial Device

<6>usbcore: registered new interface driver ftdi_sio

<6>ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver

<6>USB Serial support registered for GSM modem (1-port)

<6>usbcore: registered new interface driver option

<6>option: v0.7.2:USB Driver for GSM modems

<6>USB Serial support registered for pl2303

<6>usbcore: registered new interface driver pl2303

<6>pl2303: Prolific PL2303 USB to serial adaptor driver

<6>Nvidia Tegra High-Speed USB SOC 					Device Controller driver (Apr 30, 2012)

<6>tegra USB phy - inst[0] platform info:

<6>port_otg: yes

<6>has_hostpc: no

<6>phy_interface: USB_PHY_INTF_UTMI

<6>op_mode: TEGRA_USB_OPMODE_DEVICE

<6>vbus_pmu_irq: 0

<6>vbus_gpio: -1

<6>charging: disabled

<6>remote_wakeup: disabled

<4>create_regulator: REG-LDO_3: Failed to create debugfs directory

<4>_regulator_get: deviceless supply usb_bat_chg not found, using dummy regulator

<6>tegra-otg tegra-otg: SUSPEND --> PERIPHERAL

<6>android_usb gadget: Mass Storage Function, version: 2009/09/11

<6>android_usb gadget: Number of LUNs=1

<6> lun0: LUN: removable file: (no medium)

<6>android_usb gadget: android_usb ready

<6>tegra-udc: bind to driver android_usb

<6>mousedev: PS/2 mouse device common for all mice

SO340010: so340010_kbd_init

SO340010: so340010_kbd_probe

<6>input: so340010_kbd as /devices/virtual/input/input1

<6>Wake14 for irq=366

at168_touch: InitData[0] = 0x0---

at168_touch: InitData[1] = 0x4---

at168_touch: InitData[2] = 0x58---

at168_touch: InitData[3] = 0x2---

at168_touch: InitData[4] = 0x2---

at168_touch: InitData[5] = 0x1---

at168_touch: InitData[6] = 0x1---

at168_touch: InitData[7] = 0x12---

at168_touch: now FW xMAX is 1024   yMAx is 600 Version is 2010112.

<6>usb 1-1: new high speed USB device number 2 using tegra-ehci

<6>input: at168_touch as /devices/virtual/input/input2

<6>Wake15 for irq=271

<6>at168_touch 0-005c: at168_probe: initialized

<6>using rtc device, tps6586x-rtc, for alarms<6>tps6586x-rtc tps6586x-rtc.0: rtc core: registered tps6586x-rtc as rtc0

<6>i2c /dev entries driver

<6>Linux media interface: v0.10

<6>Linux video capture interface: v2.00

<6>soc-camera-pdrv soc-camera-pdrv.0: Probing soc-camera-pdrv.0

<6>tegra_camera tegra_camera.0: tegra_camera_enable

<6>usb 1-1: New USB device found, idVendor=0424, idProduct=2514

<6>usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

<6>tegra_camera_add_device: icd=cd9b9200 sd=  (null)

<6>hub 1-1:1.0: USB hub found

<4>_regulator_get: 3-003c supply vdda not found, using dummy regulator

<4>_regulator_get: 3-003c supply vdd_reg not found, using dummy regulator

<6>hub 1-1:1.0: 4 ports detected

<4>_regulator_get: 3-003c supply vddio not found, using dummy regulator

<6>S5K6AA 3-003c: FW API ver.: 0x1, FW rev.: 0x107

<6>tegra-camera tegra-camera.0: Not supporting RGB565X

<6>tegra-camera tegra-camera.0: Providing format YUV422 (UYVY) packed using code 8200

<6>tegra-camera tegra-camera.0: Providing format YUV422 (VYUY) packed using code 8200

<6>tegra-camera tegra-camera.0: Providing format YUV422 (YUYV) packed using code 8200

<6>tegra-camera tegra-camera.0: Providing format YUV422 (YVYU) packed using code 8200

<6>tegra-camera tegra-camera.0: Providing format YUV420 (YU12) planar using code 8200

<6>tegra-camera tegra-camera.0: Providing format YVU420 (YV12) planar using code 8200

<6>tegra-camera tegra-camera.0: Providing format YUV422 (UYVY) packed using code 8200

<6>tegra-camera tegra-camera.0: Providing format YUV422 (VYUY) packed using code 8200

<6>tegra-camera tegra-camera.0: Providing format YUV422 (YUYV) packed using code 8200

<6>tegra-camera tegra-camera.0: Providing format YUV422 (YVYU) packed using code 8200

<6>tegra-camera tegra-camera.0: Providing format YUV420 (YU12) planar using code 8200

<6>tegra-camera tegra-camera.0: Providing format YVU420 (YV12) planar using code 8200

<6>tegra-camera tegra-camera.0: Not supporting RGB565X

<6>tegra_camera tegra_camera.0: tegra_camera_disable

<5>tegra-camera tegra-camera.0: Tegra camera driver loaded.

<6>usbcore: registered new interface driver uvcvideo

<6>USB Video Class driver (1.1.1)

<6>trpc_sema_init: registered misc dev 10:51

<6>trpc_node_register: Adding 'local' to node list

<6>tegra_avp_probe: allocated carveout memory at 18100000 for AVP kernel

<6>trpc_node_register: Adding 'avp-remote' to node list

<6>tegra_avp_probe: message area d9c4000/d9c4110

<6>Driver for 1-wire Dallas network protocol.

<6>smba-battery 0-000b: driver registered

<4>i2c-core: driver [smba-battery] using legacy suspend method

<4>i2c-core: driver [smba-battery] using legacy resume method

<4>_regulator_get: deviceless supply vdd_vcore_temp not found, using dummy regulator

<4>i2c-core: driver [adt7461] using legacy suspend method

<4>i2c-core: driver [adt7461] using legacy resume method

<6>device-mapper: uevent: version 1.0.3

<6>device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com

<6>Bluetooth: HCI UART driver ver 2.2

<6>Bluetooth: HCI H4 protocol initialized

<6>Bluetooth: HCILL protocol initialized

<6>Bluetooth: BlueSleep Mode Driver Ver 1.1

<6>Wake7 for irq=358

<6>cpuidle: using governor ladder

<6>cpuidle: using governor menu

<6>sdhci: Secure Digital Host Controller Interface driver

<6>sdhci: Copyright(c) Pierre Ossman

<6>sdhci-pltfm: SDHCI platform and OF driver helper

<4>mmc0: Invalid maximum block size, assuming 512 bytes

<7>Registered led device: mmc0::

<6>mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA

<6>Wake23 for irq=261

<6>Wake23 for irq=261

<6>Enabling wake23

<6>gpio bank wake found: wake23 for irq=66

<6>Enabling wake23

<4>_regulator_get: sdhci-tegra.2 supply vddio_sdmmc not found, using dummy regulator

<3>sdhci-tegra sdhci-tegra.2: vddio_sdmmc regulator_set_voltage failed: -22<4>_regulator_get: sdhci-tegra.2 supply vddio_sd_slot not found, using dummy regulator

<4>mmc1: Invalid maximum block size, assuming 512 bytes

<4>_regulator_get: sdhci-tegra.2 supply vmmc not found, using dummy regulator

<7>Registered led device: mmc1::

<6>mmc1: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA

<4>mmc2: Invalid maximum block size, assuming 512 bytes

<4>_regulator_get: sdhci-tegra.0 supply vmmc not found, using dummy regulator

<7>Registered led device: mmc2::

<6>mmc2: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA

Registered dock switch driver

<6>usbcore: registered new interface driver usbhid

<6>usbhid: USB HID core driver

<6>logger: created 256K log 'log_main'

<6>logger: created 256K log 'log_events'

<6>logger: created 256K log 'log_radio'

<6>logger: created 256K log 'log_system'

ISL29023: isl29023_probe

ISL29023: isl29023_chip_init

<4>_regulator_get: deviceless supply vdd_vcore_phtn not found, using dummy regulator

ISL29023: isl29023_chip_init successfully

ISL29023: isl29023_probed successfully

<6>zcache: cleancache enabled using kernel transcendent memory and compression buddies

<6>mmc0: new high speed MMC card at address 0001

<6>mmcblk0: mmc0:0001 MAG4EM 14.9 GiB

<6>tegra-snd-alc5623 tegra-snd-alc5623.0: sound card registered

<6> mmcblk0: p1 p2 p3

<6>Wake12 for irq=370

<4>mmc1: host does not support reading read-only switch. assuming write-enable.

<6>mmc1: new SD card at address aaaa

<6>mmcblk1: mmc1:aaaa SU02G 1.84 GiB

<6> mmcblk1: p1

<6>asoc: alc5623-hifi <-> tegra20-i2s.0 mapping ok

<6>asoc: tegra_generic_voice_codec <-> tegra20-i2s.1 mapping ok

<6>asoc: dit-hifi <-> tegra20-spdif mapping ok

<6>input: tegra-alc5623 Headphone Jack as /devices/platform/tegra-snd-alc5623.0/sound/card0/input3

<6>ALSA device list:

<6>  #0: tegra-alc5623

<6>GACT probability NOT on

<6>Mirror/redirect action on

<6>u32 classifier

<6>    Actions configured

<6>Netfilter messages via NETLINK v0.30.

<6>nf_conntrack version 0.5.0 (5525 buckets, 22100 max)

<6>NF_TPROXY: Transparent proxy support initialized, version 4.1.0

<6>NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.

<6>xt_time: kernel timezone is -0000

<6>ip_tables: (C) 2000-2006 Netfilter Core Team

<6>arp_tables: (C) 2002 David S. Miller

<6>TCP cubic registered

<6>NET: Registered protocol family 10

<6>Mobile IPv6

<6>ip6_tables: (C) 2000-2006 Netfilter Core Team

<6>IPv6 over IPv4 tunneling driver

<6>NET: Registered protocol family 17

<6>NET: Registered protocol family 15

<6>Bluetooth: RFCOMM TTY layer initialized

<6>Bluetooth: RFCOMM socket layer initialized

<6>Bluetooth: RFCOMM ver 1.11

<6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3

<6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2

<6>rfkill_gpio rfkill_gpio: bluetooth_rfkill device registered.

<5>Registering the dns_resolver key type

<6>VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1

<6>ThumbEE CPU extension supported.

<5>Registering SWP/SWPB emulation handler

<4>Disabling clocks left on by bootloader:

<4>   audio

<4>   stat_mon

<4>   dsi2-fixed

<4>   dsi1-fixed

<4>   fuse_burn

<4>   clk_d

<4>   pll_p_out2

<6>CPU rate: 1000 MHz

<4>tegra_dvfs: vdd_cpu: stats above 1237 mV will be squashed

<4>tegra_dvfs: vdd_core: stats above 1437 mV will be squashed

<4>tegra_dvfs: vdd_aon: stats above 1437 mV will be squashed

## wifi_probe

wifi_set_power = 1

wifi_set_carddetect = 1


Dongle Host Driver, version 5.90.195.75

Compiled in drivers/net/wireless/bcmdhd on Feb 11 2013 at 17:56:41

<6>mmc2: new high speed SDIO card at address 0001

bcmdhd: fw_path: /system/vendor/firmware/fw_bcmdhd.bin nvram_path: /system/etc/wifi/bcmdhd.cal

F1 signature read @0x18000000=0x9934329

DHD: dongle ram size is set to 294912(orig 294912)

wl_create_event_handler thr:60 started

dhd_attach thr:61 started

dhd_attach thr:62 started

dhd_attach thr:63 started

_dhdsdio_download_firmware: dongle image file download failed

dhd_bus_start: dhdsdio_probe_download failed. firmware = /system/vendor/firmware/fw_bcmdhd.bin nvram = /system/etc/wifi/bcmdhd.cal

dhdsdio_probe: dhd_bus_start failed

Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33

<6>Wake24 for irq=362

<6>input: gpio-keys as /devices/platform/gpio-keys.0/input/input4

<7>smba_wake.c: Connected device: input4 (gpio-keys at gpio-keys/input0)

<6>tps6586x-rtc tps6586x-rtc.0: setting system clock to 2013-02-12 21:14:32 UTC (1360703672)

<4>Warning: unable to open an initial console.

<6>Freeing init memory: 324K

<4>init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.

<6>yaffs: dev is 32505859 name is "mtdblock3" rw

<6>yaffs: passed flags ""

<7>yaffs: Attempting MTD mount of 31.3,"mtdblock3"

<7>yaffs: block 832 is bad

<7>yaffs: block 1261 is bad

<7>yaffs: block 1858 is bad

<7>yaffs: block 2676 is bad

<7>yaffs: block 2727 is bad

<7>yaffs: block 2728 is bad

<7>yaffs: block 2977 is bad

<7>yaffs: yaffs_read_super: is_checkpointed 0

<6>EXT4-fs (mmcblk0p3): mounting ext3 file system using the ext4 subsystem

<6>zcache: created ephemeral tmem pool, id=0, client=65535

<6>EXT4-fs (mmcblk0p3): recovery complete

<6>EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,noauto_da_alloc,errors=panic

<6>zcache: created ephemeral tmem pool, id=1, client=65535

<6>EXT4-fs (mmcblk0p2): recovery complete

<6>EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,noauto_da_alloc,errors=panic

<3>init: cannot find '/system/bin/rild', disabling 'ril-daemon'

<6>tegra_uart tegra_uart.2: Setting clk_src pll_p

<6>tegra_uart tegra_uart.2: Setting clk_src clk_m

<6>tegra_uart tegra_uart.2: Setting clk_src pll_p

<6>tegra_uart tegra_uart.2: Setting clk_src clk_m

<6>tegra_uart tegra_uart.3: Setting clk_src pll_p

<6>tegra_uart tegra_uart.3: Setting clk_src clk_m

<6>tegra_uart tegra_uart.3: Setting clk_src pll_p

<6>tegra_uart tegra_uart.3: Setting clk_src clk_m

<3>init: service 'console' requires console

<3>android_usb: already disabled

<6>mtp_bind_config

<6>adb_bind_config

<6>warning: `adbd' uses 32-bit capabilities (legacy support in use)

<6>adb_open(adbd)

<6>android_work: did not send uevent (0 0   (null))

<6>android_work: sent uevent USB_STATE=CONNECTED

<6>android_work: sent uevent USB_STATE=DISCONNECTED

<6>android_work: sent uevent USB_STATE=CONNECTED

<6>android_usb gadget: high speed config #1: android

<6>android_work: sent uevent USB_STATE=CONFIGURED

<4>zram: module is from the staging directory, the quality is unknown, you have been warned.

<6>zram: Creating 2 devices ...

<6>Adding 31852k swap on /dev/block/zram0.  Priority:-1 extents:1 across:31852k SS

<6>Adding 31852k swap on /dev/block/zram1.  Priority:-2 extents:1 across:31852k SS

<6>avp_init: Using AVP MMU to relocate AVP kernel

<6>avp_init: Reading firmware from 'nvrm_avp.bin' (35364 bytes)

<6>avp_init: Loading AVP kernel at vaddr=e0a00000 paddr=18100000

<6>avp_reset: Resetting AVP: reset_addr=100000

<6>process_connect_locked: got connect (10e9a0)

<6>avp_svc_thread: got remote peer

<6>avp_node_try_connect: trying connect from RPC_AVP_PORT

<6>[AVP]: AVP kernel (May 21 2012 17:07:27)

<6>avp_node_try_connect: got conn ack 'RPC_AVP_PORT' (cdea0d20 <-> 10e964)

<6>avp_init: avp init done

<6>avp_lib: loading library 'nvmm_manager.axf'

<6>avp_lib: Successfully loaded library nvmm_manager.axf (lib_id=115940)

<6>avp_node_try_connect: trying connect from NVMM_MANAGER_SRV

<6>avp_node_try_connect: got conn ack 'NVMM_MANAGER_SRV' (cdea0d60 <-> 116bd8)

<6>avp_lib: loading library 'nvmm_service.axf'

<6>avp_lib: Successfully loaded library nvmm_service.axf (lib_id=117748)

<6>avp_node_try_connect: trying connect from caaaaaaa+

<6>avp_node_try_connect: got conn ack 'caaaaaaa+' (cdea0da0 <-> 118a88)

<6>avp_lib: loading library 'nvmm_h264dec.axf'

<6>avp_lib: Successfully loaded library nvmm_h264dec.axf (lib_id=1195f8)

<6>avp_node_try_connect: trying connect from daaaaaaa+

<6>avp_node_try_connect: got conn ack 'daaaaaaa+' (cdea0960 <-> 119ba8)

<6>process_disconnect_locked: got disconnect (cdea0960)

<6>avp_trpc_close: closing 'daaaaaaa+' (119ba8)

<4>process_disconnect_locked: got disconnect for unknown port cdea0960

<6>_send_disconnect: sent disconnect msg for 119ba8

<6>avp_lib: Successfully unloaded 'nvmm_h264dec.axf'

<6>avp_lib: unloaded 'nvmm_h264dec.axf'

<6>avp_trpc_close: closing 'caaaaaaa+' (118a88)

<6>_send_disconnect: sent disconnect msg for 118a88

<6>avp_lib: Successfully unloaded 'nvmm_service.axf'

<6>avp_lib: unloaded 'nvmm_service.axf'

<6>process_disconnect_locked: got disconnect (cdea0d60)

<6>avp_lib: Successfully unloaded 'nvmm_manager.axf'

<6>avp_lib: unloaded 'nvmm_manager.axf'

<6>request_suspend_state: wakeup (3->0) at 38594544002 (2013-02-12 21:15:05.835325001 UTC)


Dongle Host Driver, version 5.90.195.75

Compiled in drivers/net/wireless/bcmdhd on Feb 11 2013 at 17:56:41

dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.

Firmware up: fw_path=/system/vendor/firmware/fw_bcmdhd.bin op_mode=1, Broadcom Dongle Host Driver mac=e0:2a:82:07:b4:1a

Firmware version = wl0: May 25 2012 17:56:21 version 4.218.248.44

<3>CFGP2P-ERROR) wl_cfgp2p_supported : wl p2p error -23

<6>acc_open

<6>acc_release

<3>WLDEV-ERROR) wldev_set_country : wldev_set_country: set country for GB as GB rev -1

<6>mtp_open