Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Connecting to /dev/ttyUSB1, speed 115200
- Escape character: Ctrl-\ (ASCII 28, FS): enabled
- Type the escape character followed by C to get back,
- or followed by ? to see other options.
- ----------------------------------------------------
- [ 256.005816] SysRq : Emergency Remount R/O
- [ 256.384596] Restarting system with command ''.
- [ 256.388515] Going down for restart now
- [ 256.392409] Calling SCM to disable SPMI PMI
- Format: Log Type - Time(microsec) - Message - Optional Info
- Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
- S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.2.C2-00037
- S - IMAGE_VARIANT_STRING=DAASANAZA
- S - OEM_IMAGE_VERSION_STRING=administrator-p
- S - Boot Config, 0x000000e1
- B - 1566 - PBL, Start
- B - 4542 - bootable_media_detect_entry, Start
- B - 154889 - bootable_media_detect_success, Start
- B - 154894 - elf_loader_entry, Start
- B - 155507 - auth_hash_seg_entry, Start
- B - 155767 - auth_hash_seg_exit, Start
- B - 171781 - elf_segs_hash_verify_entry, Start
- B - 230895 - PBL, End
- B - 241956 - SBL1, Start
- B - 299876 - boot_flash_init, Start
- D - 30 - boot_flash_init, Delta
- B - 306464 - boot_config_data_table_init, Start
- D - 6923 - boot_config_data_table_init, Delta - (0 Bytes)
- B - 317932 - CDT version:3,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0
- B - 324062 - pm_device_init, Start
- B - 327356 - pm_device_init, TEST - MSM8909 detected
- B - 332694 - pm_device_init, INFO - PM8909 is selected
- B - 347029 - PM_SET_VAL:Skip
- D - 21380 - pm_device_init, Delta
- B - 348432 - sbl1_ddr_set_params, Start
- B - 350811 - cpr_init, Start
- D - 0 - cpr_init, Delta
- B - 356453 - Pre_DDR_clock_init, Start
- D - 183 - Pre_DDR_clock_init, Delta
- D - 0 - sbl1_ddr_set_params, Delta
- B - 369446 - pm_driver_init, Start
- B - 376095 - --> Charge init
- B - 4006 - battery voltage
- B - 379572 - boot up
- B - 10 - Current status
- D - 10736 - pm_driver_init, Delta
- B - 391925 - clock_init, Start
- D - 152 - clock_init, Delta
- B - 392870 - Image Load, Start
- D - 30653 - QSEE Image Loaded, Delta - (490096 Bytes)
- B - 423584 - Image Load, Start
- D - 366 - SEC Image Loaded, Delta - (2048 Bytes)
- B - 431849 - sbl1_efs_handle_cookies, Start
- D - 671 - sbl1_efs_handle_cookies, Delta
- B - 438559 - Image Load, Start
- D - 14793 - RPM Image Loaded, Delta - (156564 Bytes)
- B - 453413 - Image Load, Start
- D - 19154 - APPSBL Image Loaded, Delta - (499052 Bytes)
- B - 472597 - QSEE Execution, Start
- D - 274 - QSEE Execution, Delta
- B - 478331 - SBL1, End
- D - 238663 - SBL1, Delta
- S - Throughput, 27000 KB/s (1147760 Bytes, 41321 us)
- S - DDR Frequency, 400 MHz
- Android Bootloader - UART_DM Initialized!!!
- [0] [0] welcome to lk
- [10] [10] platform_init()
- [10] [10] target_init()
- [50] [50] SDHC Running in HS200 mode
- [60] [60] Done initialization of the card
- [70] [70] pm8x41_get_is_cold_boot: cold boot
- [80] [80] Waiting for the RPM to populate smd channel table
- [80] [80] Not able to search the panel:
- [130] [130] Config MIPI_VIDEO_PANEL.
- [300] [300] Panic Lut0 0 Lut1 fff Robest 0
- [300] [300] ERROR: Splash image header invalid
- [330] [330] Turn on MIPI_VIDEO_PANEL.
- [350] [350] Video lane tested successfully
- CTRL+C: enter instruction mode
- CTRL+C: out instruction mode
- input FCT : enter instruction mode
- [1440] [1440] is_enter_fctmode ch: out fct instruction mode
- [1450] [1450] Recovery command: 32 normal1
- [1450] [1450] Unable to locate /bootselect partition
- [1460] [1460] boot_verifier: Device is in ORANGE boot state.
- [1460] [1460] Device is unlocked! Skipping verification...
- [1470] [1470] Loading boot image (16898048): start
- [1580] [1580] Loading boot image (16898048): done
- [1580] [1580] use_signed_kernel=1, is_unlocked=1, is_tampered=0.
- [1610] [1610] Best match DTB tags 245/00000008/0x00000000/0/1000d/0/0/0/90a3f9bc/2826a
- [1610] [1610] Using pmic info 0x1000d/0x0/0x0/0x0 for device 0x1010d/0x0/0x0/0x0
- [1620] [1620] cmdline: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 earlyprintk buildvariant=userdebug androidboot.bootdevice=782490[1650] [1650] Updating device tree: start
- [1660] [1660] Updating device tree: done
- [1660] [1660] Channel alloc freed
- [1680] [1680] Turn off MIPI_VIDEO_PANEL.
- [1680] [1680] Continuous splash enabled, keeping panel alive.
- [1680] [1680] booting linux @ 0x80008000, ramdisk @ 0x82000000 (1350266), tags/device tree @ 0x81e00000
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.10.49-gc25540a-00008-g743adf4-dirty (BspDeveloper2@BspDeveloper2) (gcc version 4.8 (GCC) ) #4 SMP PREEMPT Thu Sep 19 14:30:25 IST 2019
- [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: Qualcomm Technologies, Inc. MSM 8909 (Flattened Device Tree), model: Qualcomm Technologies, Inc. MSM8909-PM8909 1GB MTP
- [ 0.000000] cma: Found external_image__region@0, memory base 0x87a00000, size 6 MiB, limit 0xffffffff
- [ 0.000000] cma: Found modem_adsp_region@0, memory base 0x88000000, size 85 MiB, limit 0xffffffff
- [ 0.000000] cma: Found pheripheral_region@0, memory base 0x8d500000, size 7 MiB, limit 0xffffffff
- [ 0.000000] cma: Found venus_qseecom_region@0, memory base 0x00000000, size 6 MiB, limit 0x90000000
- [ 0.000000] cma: Found audio_region@0, memory base 0x00000000, size 3 MiB, limit 0xffffffff
- [ 0.000000] cma: Found splash_region@83000000, memory base 0x83000000, size 12 MiB, limit 0xffffffff
- [ 0.000000] cma: CMA: reserved 6 MiB at 0x87a00000 for external_image_mem
- [ 0.000000] cma: CMA: reserved 85 MiB at 0x88000000 for modem_adsp_mem
- [ 0.000000] cma: CMA: reserved 7 MiB at 0x8d500000 for peripheral_mem
- [ 0.000000] cma: CMA: reserved 8 MiB at 0x8f800000 for venus_qseecom_mem
- [ 0.000000] cma: CMA: reserved 4 MiB at 0xff800000 for audio_mem
- [ 0.000000] cma: CMA: reserved 12 MiB at 0x83000000 for cont_splash_mem
- [ 0.000000] cma: CMA: reserved 8 MiB at 0xaf000000 for default region
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] PERCPU: Embedded 14 pages/cpu @c6c54000 s33472 r8192 d15680 u57344
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 494639
- [ 0.000000] Kernel command line: sched_enable_hmp=1 console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 earlyprintk buildvariant=userdebug androidboot.bootdevice=7824900.sdhci androidboot.serialno=3122bcdb androidboot.baseband=msm mdss_mdp3.panel=1:dsi:0:qcom,mdss_dsi_ili9881c_720p_video:1:none
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Memory: 1893768K/1996796K available (10541K kernel code, 1078K rwdata, 4600K rodata, 1420K init, 1349K bss, 103028K reserved, 1314812K highmem)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc0fc96f4 (16134 kB)
- [ 0.000000] .init : 0xc1000000 - 0xc11632c0 (1421 kB)
- [ 0.000000] .data : 0xc1164000 - 0xc127199c (1079 kB)
- [ 0.000000] .bss : 0xc1271a60 - 0xc13c2fe4 (1350 kB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] HMP scheduling enabled.
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
- [ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
- [ 0.000000] Switching to timer-based delay loop
- [ 0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696213963ns
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] kmemleak: Kernel memory leak detector disabled
- [ 0.000834] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
- [ 0.000852] pid_max: default: 32768 minimum: 301
- [ 0.001210] Security Framework initialized
- [ 0.001249] SELinux: Initializing.
- [ 0.001528] Mount-cache hash table entries: 512
- [ 0.003197] Initializing cgroup subsys debug
- [ 0.003218] Initializing cgroup subsys freezer
- [ 0.003272] CPU: Testing write buffer coherency: ok
- [ 0.004107] /cpus/cpu@0 missing clock-frequency property
- [ 0.004129] /cpus/cpu@1 missing clock-frequency property
- [ 0.004149] /cpus/cpu@2 missing clock-frequency property
- [ 0.004169] /cpus/cpu@3 missing clock-frequency property
- [ 0.004185] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.004347] Setting up static identity map for 0xc0ab10f8 - 0xc0ab1150
- [ 0.006404] ftrace: Allocated trace_printk buffers
- [ 0.031034] MSM Memory Dump base table set up
- [ 0.031122] MSM Memory Dump apps data table set up
- [ 0.031169] Configuring XPU violations to be fatal errors
- [ 0.041000] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.050927] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.060538] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.060832] Brought up 4 CPUs
- [ 0.060864] SMP: Total of 4 processors activated (153.60 BogoMIPS).
- [ 0.060873] CPU: All CPU(s) started in SVC mode.
- [ 0.082735] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
- [ 0.082770] ------------[ cut here ]------------
- [ 0.082796] WARNING: at /home/nvme/sc20/kernel/fs/proc/generic.c:102 __xlate_proc_name+0xa0/0xb4()
- [ 0.082805] name 'cpu/vfp_bounce'
- [ 0.082813] Modules linked in:
- [ 0.082832] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.49-gc25540a-00008-g743adf4-dirty #4
- [ 0.082862] [<c010be54>] (unwind_backtrace+0x0/0x11c) from [<c0109a04>] (show_stack+0x10/0x14)
- [ 0.082889] [<c0109a04>] (show_stack+0x10/0x14) from [<c0121784>] (warn_slowpath_common+0x4c/0x6c)
- [ 0.082915] [<c0121784>] (warn_slowpath_common+0x4c/0x6c) from [<c01217d0>] (warn_slowpath_fmt+0x2c/0x3c)
- [ 0.082939] [<c01217d0>] (warn_slowpath_fmt+0x2c/0x3c) from [<c024ba0c>] (__xlate_proc_name+0xa0/0xb4)
- [ 0.082962] [<c024ba0c>] (__xlate_proc_name+0xa0/0xb4) from [<c024ba6c>] (__proc_create+0x4c/0xf4)
- [ 0.082985] [<c024ba6c>] (__proc_create+0x4c/0xf4) from [<c024be50>] (proc_create_data+0x58/0x98)
- [ 0.083011] [<c024be50>] (proc_create_data+0x58/0x98) from [<c1002e34>] (vfp_init+0x16c/0x1d8)
- [ 0.083036] [<c1002e34>] (vfp_init+0x16c/0x1d8) from [<c0100670>] (do_one_initcall+0xb8/0x160)
- [ 0.083059] [<c0100670>] (do_one_initcall+0xb8/0x160) from [<c1000be4>] (kernel_init_freeable+0x10c/0x1d0)
- [ 0.083084] [<c1000be4>] (kernel_init_freeable+0x10c/0x1d0) from [<c0a96fa8>] (kernel_init+0x8/0xe4)
- [ 0.083106] [<c0a96fa8>] (kernel_init+0x8/0xe4) from [<c0105ff8>] (ret_from_fork+0x14/0x3c)
- [ 0.083155] ---[ end trace da227214a82491b7 ]---
- [ 0.083166] Failed to create procfs node for VFP bounce reporting
- [ 0.086635] pinctrl core: initialized pinctrl subsystem
- [ 0.087233] regulator-dummy: no parameters
- [ 0.102849] NET: Registered protocol family 16
- [ 0.117098] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.179765] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
- [ 0.188686] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
- [ 0.189082] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
- [ 0.191539] cma: Assigned CMA region at 0 to 1de0000.qcom,venus device
- [ 0.196265] cma: Assigned CMA region at 0 to a21b000.qcom,pronto device
- [ 0.196629] cma: Assigned CMA region at 0 to 4080000.qcom,mss device
- [ 0.210124] KPI: Bootloader start count = 18066
- [ 0.210139] KPI: Bootloader end count = 73691
- [ 0.210149] KPI: Bootloader display count = 29173
- [ 0.210159] KPI: Bootloader load kernel count = 3563
- [ 0.210169] KPI: Kernel MPM timestamp = 170528
- [ 0.210178] KPI: Kernel MPM Clock frequency = 32768
- [ 0.210208] socinfo_print: v10, id=245, ver=2.0, raw_id=2400, raw_ver=1, hw_plat=8, hw_plat_ver=65536
- [ 0.210208] accessory_chip=0, hw_plat_subtype=0, pmic_model=65549, pmic_die_revision=65537 foundry_id=1 serial_number=270169395
- [ 0.212372] smd_channel_probe_worker: allocation table not initialized
- [ 0.212395] smd_channel_probe_worker: allocation table not initialized
- [ 0.219343] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 0.219358] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 0.219985] msm_mpm_dev_probe(): Cannot get clk resource for XO
- [ 0.220019] platform 601d0.qcom,mpm: Driver mpm-v2 requests probe deferral
- [ 0.220664] msm-jtag-fuse 5e01c.jtagfuse: JTag Fuse initialized
- [ 0.222775] pm8909_s1_corner: 0 <--> 0 mV at 0 mV normal idle
- [ 0.223642] pm8909_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
- [ 0.224474] pm8909_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
- [ 0.225279] pm8909_s1_corner_so: 0 <--> 0 mV at 0 mV normal idle
- [ 0.226093] pm8909_s2: 1850 mV normal idle
- [ 0.226911] pm8909_l1: 1000 mV normal idle
- [ 0.227736] pm8909_l2: 1200 mV normal idle
- [ 0.228531] pm8909_l3: 500 <--> 1350 mV at 0 mV normal idle
- [ 0.229301] pm8909_l3_corner_ao: 0 <--> 0 mV at 0 mV normal idle
- [ 0.230037] pm8909_l3_corner_so: 0 <--> 0 mV at 0 mV normal idle
- [ 0.230897] pm8909_l4: 1800 mV normal idle
- [ 0.231807] pm8909_l5: 1800 mV normal idle
- [ 0.232702] pm8909_l6: 1800 mV normal idle
- [ 0.233511] pm8909_l7: 1800 mV normal idle
- [ 0.234271] pm8909_l7_ao: 1800 mV normal idle
- [ 0.235080] pm8909_l7_so: 1800 mV normal idle
- [ 0.235913] pm8909_l8: 2850 <--> 2900 mV at 2850 mV normal idle
- [ 0.236702] pm8909_l9: 3000 <--> 3300 mV at 3000 mV normal idle
- [ 0.237577] pm8909_l10: 1225 <--> 1300 mV at 1225 mV normal idle
- [ 0.238452] pm8909_l11: 1800 <--> 2950 mV at 1800 mV normal idle
- [ 0.239243] pm8909_l12: 1800 <--> 2950 mV at 1800 mV normal idle
- [ 0.240093] pm8909_l13: 3075 mV normal idle
- [ 0.240998] pm8909_l14: 1800 <--> 3000 mV at 1800 mV normal idle
- [ 0.241909] pm8909_l15: 1800 <--> 3000 mV at 1800 mV normal idle
- [ 0.242674] pm8909_l17: 2800 <--> 2850 mV at 2800 mV normal idle
- [ 0.243530] pm8909_l18: 2700 mV normal idle
- [ 0.245455] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
- [ 0.245554] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
- [ 0.245574] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
- [ 0.245614] platform 78b6000.i2c: Driver i2c-msm-v2 requests probe deferral
- [ 0.245878] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
- [ 0.245951] i2c-msm-v2 78b8000.i2c: error on clk_get(core_clk):-517
- [ 0.245969] i2c-msm-v2 78b8000.i2c: error probe() failed with err:-517
- [ 0.246000] platform 78b8000.i2c: Driver i2c-msm-v2 requests probe deferral
- [ 0.246250] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2
- [ 0.246321] i2c-msm-v2 78b9000.i2c: error on clk_get(core_clk):-517
- [ 0.246337] i2c-msm-v2 78b9000.i2c: error probe() failed with err:-517
- [ 0.246368] platform 78b9000.i2c: Driver i2c-msm-v2 requests probe deferral
- [ 0.246615] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
- [ 0.246685] i2c-msm-v2 78b7000.i2c: error on clk_get(core_clk):-517
- [ 0.246702] i2c-msm-v2 78b7000.i2c: error probe() failed with err:-517
- [ 0.246733] platform 78b7000.i2c: Driver i2c-msm-v2 requests probe deferral
- [ 0.246979] i2c-msm-v2 78b5000.i2c: probing driver i2c-msm-v2
- [ 0.247049] i2c-msm-v2 78b5000.i2c: error on clk_get(core_clk):-517
- [ 0.247065] i2c-msm-v2 78b5000.i2c: error probe() failed with err:-517
- [ 0.247096] platform 78b5000.i2c: Driver i2c-msm-v2 requests probe deferral
- [ 0.252339] sps:sps is ready.
- [ 0.264131] qcom,rpmcc-8909 1800000.qcom,rpmcc: Registered RPM clocks.
- [ 0.284341] qcom,gcc-8909 1800000.qcom,gcc: Registered GCC clocks
- [ 0.285494] clock-a7 b011050.qcom,clock-a7: Speed bin: 2 PVS Version: 0
- [ 0.287859] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
- [ 0.287968] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.287986] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
- [ 0.288553] i2c i2c-2: of_i2c: modalias failure on /soc/i2c@78b6000/nq@28
- [ 0.288923] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
- [ 0.289016] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.289031] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
- [ 0.289761] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2
- [ 0.289852] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.289869] i2c-msm-v2 78b9000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
- [ 0.291269] kworker/u8:2 (51) used greatest stack depth: 6740 bytes left
- [ 0.291421] kworker/u8:2 (50) used greatest stack depth: 6716 bytes left
- [ 0.292868] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
- [ 0.293064] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.293082] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
- [ 0.295341] kworker/u8:2 (58) used greatest stack depth: 6676 bytes left
- [ 0.296566] i2c-msm-v2 78b5000.i2c: probing driver i2c-msm-v2
- [ 0.296670] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.296687] i2c-msm-v2 78b5000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
- [ 0.348725] bio: create slab <bio-0> at 0
- [ 0.351264] spk_vreg: no parameters
- [ 0.352040] oem_otg_ext_vreg: no parameters
- [ 0.353828] SCSI subsystem initialized
- [ 0.354710] usbcore: registered new interface driver usbfs
- [ 0.354803] usbcore: registered new interface driver hub
- [ 0.355097] usbcore: registered new device driver usb
- [ 0.355316] media: Linux media interface: v0.10
- [ 0.355390] Linux video capture interface: v2.00
- [ 0.355677] BATTERY: batterydata_init: Battery-data device created!
- [ 0.357289] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
- [ 0.357584] cma: Assigned CMA region at 0 to 1c.qcom,ion-heap device
- [ 0.357853] cma: Assigned CMA region at 0 to 1a.qcom,ion-heap device
- [ 0.358165] ION heap system created
- [ 0.358363] ION heap qsecom created at 0x8f800000 with size 600000
- [ 0.358389] ION heap audio created at 0xff800000 with size 314000
- [ 0.358411] ION heap pil_2 created at 0x88000000 with size 5500000
- [ 0.358872] msm_bus_fabric_init_driver
- [ 0.359173] msm_bus_device 580000.ad-hoc-bus: Dev 0
- [ 0.359197] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
- [ 0.359365] msm_bus_device 580000.ad-hoc-bus: msmbus_coresight initialized
- [ 0.359401] msm_bus_device 580000.ad-hoc-bus: Dev 4096
- [ 0.359420] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
- [ 0.359432] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
- [ 0.359570] msm_bus_device 580000.ad-hoc-bus: msmbus_coresight initialized
- [ 0.359628] msm_bus_device 580000.ad-hoc-bus: Dev 1024
- [ 0.359649] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
- [ 0.359661] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
- [ 0.359842] msm_bus_device 580000.ad-hoc-bus: msmbus_coresight initialized
- [ 0.359875] msm_bus_device 580000.ad-hoc-bus: Dev 2048
- [ 0.359895] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
- [ 0.359931] msm_bus_device 580000.ad-hoc-bus: Coresight support absent for bus: 2048
- [ 0.363059] msm_bus_init_clk: Valid node clk node 0 ctx 0
- [ 0.363070] msm_bus_init_clk: Valid node clk node 0 ctx 1msm_bus_init_clk: Valid node clk node 4096 ctx 0
- [ 0.363185] msm_bus_init_clk: Valid node clk node 4096 ctx 1msm_bus_init_clk: Valid node clk node 1024 ctx 0
- [ 0.363315] msm_bus_init_clk: Valid node clk node 1024 ctx 1msm_bus_init_clk: Valid Iface clk node 1024
- [ 0.363414] msm_bus_init_clk: Valid node clk node 2048 ctx 0msm_bus_init_clk: Valid node clk node 2048 ctx 1
- [ 0.377742] gdsc_venus: no parameters
- [ 0.378251] gdsc_mdss: no parameters
- [ 0.378732] gdsc_vfe: no parameters
- [ 0.379113] gdsc_oxili_gx: no parameters
- [ 0.379532] gdsc_venus_core0: fast normal
- [ 0.380555] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
- [ 0.381929] dsi_pll_clock_register_lpm: Registered DSI PLL clocks successfully
- [ 0.382980] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at f0320000, with 2 ctx banks
- [ 0.383876] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at f0380000, with 22 ctx banks
- [ 0.390681] msm_iommu_ctx 1f09000.qcom,iommu-ctx: context gfx3d_user using bank 1
- [ 0.390936] msm_iommu_ctx 1f0a000.qcom,iommu-ctx: context gfx3d_priv using bank 2
- [ 0.391153] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context MSA0_Audio using bank 2
- [ 0.391366] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context vfe using bank 3
- [ 0.391550] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context mdp_0 using bank 4
- [ 0.391733] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_ns using bank 5
- [ 0.391919] msm_iommu_ctx 1e27000.qcom,iommu-ctx: context mDSP using bank 7
- [ 0.392100] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context gss using bank 8
- [ 0.392280] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context a2 using bank 9
- [ 0.392531] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context mdp_1 using bank 18
- [ 0.392796] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context venus_sec_pixel using bank 19
- [ 0.393010] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context venus_sec_bitstream using bank 20
- [ 0.393200] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 21
- [ 0.393453] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_fw using bank 22
- [ 0.393640] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context periph_rpm using bank 23
- [ 0.393865] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context periph_CE using bank 24
- [ 0.394052] msm_iommu_ctx 1e39000.qcom,iommu-ctx: context periph_BLSP using bank 25
- [ 0.394233] msm_iommu_ctx 1e3a000.qcom,iommu-ctx: context periph_SDC1 using bank 26
- [ 0.394435] msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context periph_SDC2 using bank 27
- [ 0.394643] msm_iommu_ctx 1e3c000.qcom,iommu-ctx: context periph_audio using bank 28
- [ 0.394826] msm_iommu_ctx 1e3d000.qcom,iommu-ctx: context periph_USB_HS1 using bank 29
- [ 0.395008] msm_iommu_ctx 1e2a000.qcom,iommu-ctx: context qpic using bank 10
- [ 0.395191] msm_iommu_ctx 1e31000.qcom,iommu-ctx: context wlan using bank 17
- [ 0.395375] msm_iommu_ctx 1e3f000.qcom,iommu-ctx: context periph_CE_secure using bank 31
- [ 0.397062] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.397867] Bluetooth: ee855f10
- [ 0.397929] NET: Registered protocol family 31
- [ 0.397939] Bluetooth: ee855f10
- [ 0.397980] Bluetooth: ee855f08Bluetooth: ee855ef8
- [ 0.398047] Bluetooth: ee855f00[ 0.398498] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.398536] cfg80211: World regulatory domain updated:
- [ 0.398545] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 0.398555] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 0.398564] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 0.398573] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 0.398582] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- [ 0.398591] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- [ 0.398600] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- [ 0.398609] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- [ 0.398618] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
- [ 0.399657] Switching to clocksource arch_sys_counter
- [ 0.464638] NET: Registered protocol family 2
- [ 0.465596] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.466162] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
- [ 0.466335] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.466522] TCP: reno registered
- [ 0.466608] UDP hash table entries: 512 (order: 2, 24576 bytes)
- [ 0.466708] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
- [ 0.467111] NET: Registered protocol family 1
- [ 0.468152] gcc-mdss-8909 qcom,gcc-mdss.31: Registered GCC MDSS clocks.
- [ 0.468921] Trying to unpack rootfs image as initramfs...
- [ 0.560984] Freeing initrd memory: 1316K (c2000000 - c2149000)
- [ 0.564007] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
- [ 0.568338] Initialise module verification
- [ 0.568488] audit: initializing netlink socket (disabled)
- [ 0.568572] type=2000 audit(0.549:1): initialized
- [ 0.789070] bounce pool size: 64 pages
- [ 0.800306] fuse init (API version 7.23)
- [ 0.805657] Key type asymmetric registered
- [ 0.805670] Asymmetric key parser 'x509' registered
- [ 0.805972] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
- [ 0.805983] io scheduler noop registered
- [ 0.805991] io scheduler deadline registered
- [ 0.806024] io scheduler row registered
- [ 0.806266] io scheduler cfq registered (default)
- [ 0.810445] platform qcom,smp2pgpio-ssr-smp2p-4-in.14: Driver smp2pgpio requests probe deferral
- [ 0.810740] platform qcom,smp2pgpio-ssr-smp2p-4-out.15: Driver smp2pgpio requests probe deferral
- [ 0.810997] platform qcom,smp2pgpio-ssr-smp2p-1-in.16: Driver smp2pgpio requests probe deferral
- [ 0.811254] platform qcom,smp2pgpio-ssr-smp2p-1-out.17: Driver smp2pgpio requests probe deferral
- [ 0.814953] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
- [ 0.815297] mdss_dsi_panel_init: Panel Name = ili9881c 720p video mode dsi panel
- [ 0.815713] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
- [ 0.815737] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
- [ 0.815778] mdss_dsi_parse_panel_features: ulps feature disabled
- [ 0.815792] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
- [ 0.815803] mdss_dsi_parse_panel_features: dynamic switch feature enabled: 0
- [ 0.815828] mdss_dsi_parse_panel_features:1207, Disp_en gpio not specified
- [ 0.815850] mdss_dsi_panel_init: Continuous splash enabled
- [ 0.816362] dsi_panel_device_register:1875, TE gpio not specified
- [ 0.816380] dsi_panel_device_register: bklt_en gpio not specified
- [ 0.816511] mdss_dsi_pll_1_clk_init: can't find vco_clk. rc=-517
- [ 0.816518] PLL 1 Clock's did not register
- [ 0.816547] mdss_dsi_retrieve_ctrl_resources: ctrl_base=f00fc000 ctrl_size=25c phy_base=f00fe500 phy_size=2b0
- [ 0.816560] dsi_panel_device_register: Using default BTA for ESD check
- [ 0.830663] mdss_register_panel: adding framebuffer device 1ac8000.qcom,mdss_dsi
- [ 0.833027] mdss_dsi_status_init: DSI status check interval:5000
- [ 0.834454] mdp3_alloc: allocating 12582912 bytes at c3000000 (83000000 phys) for fb 0
- [ 0.834861] mdss_fb_register: FrameBuffer[0] 720x1280 registered successfully!
- [ 0.834870] mdp3_ctrl_init: mdp3_ctrl_init
- [ 0.834981] mdp3 1a00000.qcom,mdss_mdp: Unbalanced pm_runtime_enable!
- [ 0.837965] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
- [ 0.840461] msm_rpm_log_probe: OK
- [ 0.844768] NET: Registered protocol family 27
- [ 0.850170] In memshare_probe, Memshare probe success
- [ 0.852469] subsys-pil-tz a21b000.qcom,pronto: [wcnss]: Error getting proxy unvoting gpio
- [ 0.852496] platform a21b000.qcom,pronto: Driver subsys-pil-tz requests probe deferral
- [ 0.854295] pil-q6v5-mss 4080000.qcom,mss: [modem]: Error getting proxy unvoting gpio
- [ 0.854496] platform 4080000.qcom,mss: Driver pil-q6v5-mss requests probe deferral
- [ 0.855837] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
- [ 0.855881] AXI: get_pdata(): Error: Client name not found
- [ 0.855890] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
- [ 0.855897] msm_serial_hsl_probe: Bus scaling is disabled
- [ 0.856043] 78af000.serial: ttyHSL0 at MMIO 0x78af000 (irq = 139) is a MSM
- [ 0.856103] msm_hsl_console_setup: console setup on port #0
- [ 1.259795] msm_thermal:do_freq_control Limiting CPU0 max frequency to 800000. Temp:60
- [ 1.259909] msm_thermal:do_freq_control Limiting CPU1 max frequency to 800000. Temp:60
- [ 1.259930] msm_thermal:do_freq_control Limiting CPU2 max frequency to 800000. Temp:60
- [ 1.259949] msm_thermal:do_freq_control Limiting CPU3 max frequency to 800000. Temp:60
- [ 3.070494] console [ttyHSL0] enabled
- [ 3.074653] msm_serial_hsl_probe: detected port #1 (ttyHSL1)
- [ 3.079843] AXI: get_pdata(): Error: Client name not found
- [ 3.085205] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
- [ 3.094714] msm_serial_hsl_probe: Bus scaling is disabled
- [ 3.100229] 78b0000.serial: ttyHSL1 at MMIO 0x78b0000 (irq = 140) is a MSM
- [ 3.107624] msm_serial_hsl_init: driver initialized
- [ 3.129516] kgsl kgsl-3d0: Initialized kgsl-3d0: mmu=on
- [ 3.151048] brd: module loaded
- [ 3.158850] loop: module loaded
- [ 3.161989] apds993x 1-0039: Unable to read cross_talk use default 100
- [ 3.300222] i2c-msm-v2 78b5000.i2c: msm_bus_scale_register_client(mstr-id:86):0x5 (ok)
- [ 3.307980] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x39 MSTR_STS:0x011363c8 OPER:0x00000010
- [ 3.322901] apds993x 1-0039: Neither APDS993x nor APDS990x
- [ 3.328284] apds993x 1-0039: Not a valid chip ID
- [ 3.333935] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x405000
- [ 3.339213] QSEECOM: qseecom_probe: disk-encrypt-pipe-pair=0x2
- [ 3.344897] QSEECOM: qseecom_probe: Device does not support PFEQSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
- [ 3.354792] QSEECOM: qseecom_probe: qseecom.appsbl_qseecom_support = 0x0[ 3.361520] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
- [ 3.368737] QSEECOM: qseecom_probe: secure app region addr=0x87a00000 size=0x200000
- [ 3.379383] i2c-core: driver [tabla-i2c-core] using legacy suspend method
- [ 3.385415] i2c-core: driver [tabla-i2c-core] using legacy resume method
- [ 3.392246] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
- [ 3.398927] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
- [ 3.406074] i2c-core: driver [tasha-i2c-core] using legacy suspend method
- [ 3.412652] i2c-core: driver [tasha-i2c-core] using legacy resume method
- [ 3.420688] SCSI Media Changer driver v0.25
- [ 3.428542] tun: Universal TUN/TAP device driver, 1.6
- [ 3.432639] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 3.442892] PPP generic driver version 2.4.2
- [ 3.446339] PPP BSD Compression module registered
- [ 3.450867] PPP Deflate Compression module registered
- [ 3.455862] PPP MPPE Compression module registered
- [ 3.460666] NET: Registered protocol family 24
- [ 3.466276] wcnss_wlan probed in built-in mode
- [ 3.474386] usbcore: registered new interface driver asix
- [ 3.478845] usbcore: registered new interface driver ax88179_178a
- [ 3.485005] usbcore: registered new interface driver cdc_ether
- [ 3.490769] usbcore: registered new interface driver net1080
- [ 3.496353] usbcore: registered new interface driver cdc_subset
- [ 3.502306] usbcore: registered new interface driver zaurus
- [ 3.508228] usbcore: registered new interface driver cdc_ncm
- [ 3.514454] msm_sharedmem: sharedmem_register_qmi: qmi init successful
- [ 3.520572] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
- [ 3.527691] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_dsp'
- [ 3.535473] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_mdm'
- [ 3.543644] msm_otg 78d9000.usb: msm_otg probe
- [ 3.551879] msm_otg 78d9000.usb: OTG regs = f01f4000
- [ 3.559259] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.564814] ehci-msm: Qualcomm On-Chip EHCI Host Controller
- [ 3.571092] ehci-msm2: Qualcomm EHCI Host Controller
- [ 3.575993] usbcore: registered new interface driver cdc_acm
- [ 3.580963] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 3.588988] usbcore: registered new interface driver ccid_bridge
- [ 3.595191] ccid_bridge_init: success
- [ 3.598655] usbcore: registered new interface driver usb-storage
- [ 3.604622] usbcore: registered new interface driver ums-alauda
- [ 3.610516] usbcore: registered new interface driver ums-cypress
- [ 3.616456] usbcore: registered new interface driver ums-datafab
- [ 3.622492] usbcore: registered new interface driver ums-freecom
- [ 3.628434] usbcore: registered new interface driver ums-isd200
- [ 3.634388] usbcore: registered new interface driver ums-jumpshot
- [ 3.640460] usbcore: registered new interface driver ums-karma
- [ 3.646230] usbcore: registered new interface driver ums-onetouch
- [ 3.652354] usbcore: registered new interface driver ums-sddr09
- [ 3.658247] usbcore: registered new interface driver ums-sddr55
- [ 3.664162] usbcore: registered new interface driver ums-usbat
- [ 3.670161] usbcore: registered new interface driver usbserial
- [ 3.675747] usbcore: registered new interface driver qc_csvt
- [ 3.681456] usbserial: USB Serial support registered for qc_csvt
- [ 3.687394] usbcore: registered new interface driver usb_ehset_test
- [ 3.696262] msm_otg 78d9000.usb: phy_reset: success
- [ 3.697424] mousedev: PS/2 mouse device common for all mice
- [ 3.697763] usbcore: registered new interface driver xpad
- [ 3.700021] Goodix-TS 5-005d: Regulator get failed avdd ret=-19
- [ 3.700037] Goodix-TS 5-005d: Regulator get failed vdd ret=-19
- [ 3.700989] Goodix-TS 5-005d: Can not lookup pmx_ts_release pinstate -19
- [ 3.820203] i2c-msm-v2 78b9000.i2c: msm_bus_scale_register_client(mstr-id:86):0x8 (ok)
- [ 3.827625] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000090
- [ 3.843086] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x5d MSTR_STS:0x0d1300c8 OPER:0x00000090
- [ 3.858794] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000090
- [ 3.874438] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000090
- [ 3.890148] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000090
- [ 3.905691] Goodix-TS 5-005d: init external watchdog failed!
- [ 3.911499] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 3.927051] Goodix-TS 5-005d: I2C retry: 1
- [ 3.931285] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 3.946843] Goodix-TS 5-005d: I2C retry: 2
- [ 3.951077] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 3.966635] Goodix-TS 5-005d: I2C retry: 3
- [ 3.970869] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 3.986426] Goodix-TS 5-005d: I2C retry: 4
- [ 3.990659] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.006217] Goodix-TS 5-005d: I2C retry: 5
- [ 4.010372] Goodix-TS 5-005d: gtp_reset_guitar exit init_done=0:
- [ 4.016234] Goodix-TS 5-005d: GTP i2c test failed time 4.
- [ 4.049980] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.064727] Goodix-TS 5-005d: I2C retry: 1
- [ 4.068920] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.084519] Goodix-TS 5-005d: I2C retry: 2
- [ 4.088711] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.104311] Goodix-TS 5-005d: I2C retry: 3
- [ 4.108502] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.124103] Goodix-TS 5-005d: I2C retry: 4
- [ 4.128295] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.143893] Goodix-TS 5-005d: I2C retry: 5
- [ 4.147920] Goodix-TS 5-005d: gtp_reset_guitar exit init_done=0:
- [ 4.153955] Goodix-TS 5-005d: GTP i2c test failed time 3.
- [ 4.179945] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.194691] Goodix-TS 5-005d: I2C retry: 1
- [ 4.198883] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.214482] Goodix-TS 5-005d: I2C retry: 2
- [ 4.218675] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.234273] Goodix-TS 5-005d: I2C retry: 3
- [ 4.238465] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.254065] Goodix-TS 5-005d: I2C retry: 4
- [ 4.258258] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.273860] Goodix-TS 5-005d: I2C retry: 5
- [ 4.277883] Goodix-TS 5-005d: gtp_reset_guitar exit init_done=0:
- [ 4.283916] Goodix-TS 5-005d: GTP i2c test failed time 2.
- [ 4.309948] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.324694] Goodix-TS 5-005d: I2C retry: 1
- [ 4.328886] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.344484] Goodix-TS 5-005d: I2C retry: 2
- [ 4.348678] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.364275] Goodix-TS 5-005d: I2C retry: 3
- [ 4.368468] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.384069] Goodix-TS 5-005d: I2C retry: 4
- [ 4.388261] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.403859] Goodix-TS 5-005d: I2C retry: 5
- [ 4.407887] Goodix-TS 5-005d: gtp_reset_guitar exit init_done=0:
- [ 4.413920] Goodix-TS 5-005d: GTP i2c test failed time 1.
- [ 4.439946] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.454693] Goodix-TS 5-005d: I2C retry: 1
- [ 4.458884] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.474485] Goodix-TS 5-005d: I2C retry: 2
- [ 4.478674] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.494275] Goodix-TS 5-005d: I2C retry: 3
- [ 4.498466] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.514063] Goodix-TS 5-005d: I2C retry: 4
- [ 4.518260] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.533859] Goodix-TS 5-005d: I2C retry: 5
- [ 4.537884] Goodix-TS 5-005d: gtp_reset_guitar exit init_done=0:
- [ 4.543918] Goodix-TS 5-005d: GTP i2c test failed time 0.
- [ 4.569779] Goodix-TS 5-005d: I2C communication ERROR!
- [ 4.574085] Goodix-TS: probe of 5-005d failed with error -107
- [ 4.580346] <<GTP-INF>>[gt1x_ts_probe:626] GTP Driver Version: V1.4<2015/07/10>
- [ 4.586901] <<GTP-INF>>[gt1x_ts_probe:627] GTP I2C Address: 0x14
- [ 4.593031] <<GTP-ERR>>[gt1x_parse_dt:331] regulator get of vdd_ana failed
- [ 4.600324] Goodix-TP 5-0014: Can not lookup pmx_ts_release pinstate -19
- [ 4.606458] <<GTP-INF>>[gt1x_reset_guitar:815] GTP RESET!
- [ 4.729960] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:5) mode:FIFO slv_addr:0x14 MSTR_STS:0x011363c8 OPER:0x00000090
- [ 4.744709] <<GTP-ERR>>[_do_i2c_write:433] I2c transfer error! (-107)
- [ 4.751120] <<GTP-ERR>>[gt1x_init:2353] Reset guitar failed!
- [ 4.756717] <<GTP-INF>>[gt1x_reset_guitar:815] GTP RESET!
- [ 4.879949] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:5) mode:FIFO slv_addr:0x14 MSTR_STS:0x011363c8 OPER:0x00000090
- [ 4.894695] <<GTP-ERR>>[_do_i2c_write:433] I2c transfer error! (-107)
- [ 4.901108] <<GTP-ERR>>[gt1x_init:2353] Reset guitar failed!
- [ 4.906704] <<GTP-INF>>[gt1x_reset_guitar:815] GTP RESET!
- [ 5.029956] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:5) mode:FIFO slv_addr:0x14 MSTR_STS:0x011363c8 OPER:0x00000090
- [ 5.044703] <<GTP-ERR>>[_do_i2c_write:433] I2c transfer error! (-107)
- [ 5.051116] <<GTP-ERR>>[gt1x_init:2353] Reset guitar failed!
- [ 5.056711] <<GTP-INF>>[gt1x_reset_guitar:815] GTP RESET!
- [ 5.179950] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:5) mode:FIFO slv_addr:0x14 MSTR_STS:0x011363c8 OPER:0x00000090
- [ 5.194693] <<GTP-ERR>>[_do_i2c_write:433] I2c transfer error! (-107)
- [ 5.201105] <<GTP-ERR>>[gt1x_init:2353] Reset guitar failed!
- [ 5.206704] <<GTP-INF>>[gt1x_reset_guitar:815] GTP RESET!
- [ 5.329949] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:5) mode:FIFO slv_addr:0x14 MSTR_STS:0x011363c8 OPER:0x00000090
- [ 5.344693] <<GTP-ERR>>[_do_i2c_write:433] I2c transfer error! (-107)
- [ 5.351105] <<GTP-ERR>>[gt1x_init:2353] Reset guitar failed!
- [ 5.356705] <<GTP-ERR>>[gt1x_init:2379] Init failed, use default setting
- [ 5.363603] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:4 tx:2) mode:FIFO slv_addr:0x14 MSTR_STS:0x011363c8 OPER:0x00000010
- [ 5.379153] <<GTP-ERR>>[_do_i2c_read:391] I2c Transfer error! (-107)
- [ 5.385481] <<GTP-ERR>>[gt1x_get_chip_type:922] I2c communication error.
- [ 5.392158] <<GTP-ERR>>[gt1x_init:2389] Get chip type failed!
- [ 5.397861] <<GTP-ERR>>[gt1x_ts_probe:664] gt1x_init() failed.
- [ 5.403771] Goodix-TP: probe of 5-0014 failed with error -1
- [ 5.430881] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x30 MSTR_STS:0x011363c8 OPER:0x00000010
- [ 5.445656] mmc3416x 1-0030: read reg 6 failed.(-107)
- [ 5.450657] mmc3416x 1-0030: Check device failed
- [ 5.455428] mmc3416x: probe of 1-0030 failed with error -107
- [ 5.461089] stk3x1x_probe: driver version = 3.4.4ts
- [ 5.465785] stk_ps 1-0048: stk3x1x_probe: stk3x1x_parse_dt ret=0
- [ 5.472116] input: stk3x1x-ls as /devices/soc.0/78b5000.i2c/i2c-1/1-0048/input/input0
- [ 5.480022] input: proximity as /devices/soc.0/78b5000.i2c/i2c-1/1-0048/input/input1
- [ 5.489605] mpu6050 1-0068: Regulator get failed vi2c ret=-19
- [ 5.600014] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x68 MSTR_STS:0x011363c8 OPER:0x00000010
- [ 5.614803] mpu6050 1-0068: Fail to read power mode, ret=-107
- [ 5.620489] mpu6050 1-0068: Cannot get invalid chip type
- [ 5.625912] mpu6050 1-0068: Probe device return error-107
- [ 5.631214] mpu6050: probe of 1-0068 failed with error -107
- [ 5.636776] AKM compass driver: initialize.
- [ 5.729978] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0xc MSTR_STS:0x011363c8 OPER:0x00000090
- [ 5.744668] akm8963 1-000c: akm_i2c_txdata: transfer failed.
- [ 5.750321] akm8963 1-000c: AKECS_Set_PowerDown: Can not set to powerdown mode.
- [ 5.757709] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0xc MSTR_STS:0x011363c8 OPER:0x00000010
- [ 5.773222] akm8963 1-000c: akm_i2c_rxdata: transfer failed.
- [ 5.778955] akm8963: probe of 1-000c failed with error -107
- [ 5.784498] AKM compass driver: initialize.
- [ 5.788610] i2c-core: driver [bma2x2-accel] using legacy suspend method
- [ 5.795158] i2c-core: driver [bma2x2-accel] using legacy resume method
- [ 5.801835] i2c-core: driver [bmi160] using legacy suspend method
- [ 5.807690] i2c-core: driver [bmi160] using legacy resume method
- [ 5.814997] qcom,qpnp-rtc qpnp-rtc-6: rtc core: registered qpnp_rtc as rtc0
- [ 5.821329] i2c /dev entries driver
- [ 5.830412] platform 1d00000.qcom,vidc: Driver msm_vidc_v4l2 requests probe deferral
- [ 5.841790] msm_actuator_i2c_probe:1313 msm_actuator_i2c_probe: succeeded
- [ 5.848247] LED trigger flashlight-trigger failed to register (-17)
- [ 5.855217] adp1660 i2c_add_driver success
- [ 5.858667] msm_flash_init_module:1114 Enter
- [ 5.863219] msm_flash_lm3642_init entry
- [ 5.867926] msm_eeprom_parse_memory_map: pageen not needed
- [ 5.872508] msm_eeprom_parse_memory_map: pageen not needed
- [ 5.877858] msm_eeprom_parse_memory_map: pageen not needed
- [ 5.914966] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0x9 (ok)
- [ 5.922450] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x36 MSTR_STS:0x0d1300c8 OPER:0x00000090
- [ 5.949782] read_eeprom_memory: page write failed
- [ 5.953447] msm_eeprom_i2c_probe read_eeprom_memory failed
- [ 5.989865] msm_eeprom_i2c_probe failed! rc = -107
- [ 5.993633] msm_eeprom: probe of 3-006c failed with error -107
- [ 6.002208] g_sctrl[0] edcd2000
- [ 6.004818] g_sctrl[1] edcd2800[ 6.007326] gc0310_init_module:487
- [ 6.015954] BMS: bms_get_adc: vadc not found - defer probe rc=-517
- [ 6.021245] BMS: qpnp_vm_bms_probe: Failed to get adc rc=-517
- [ 6.026851] spmi qpnp-vm-bms-10: Driver qcom,qpnp-vm-bms requests probe deferral
- [ 6.034649] CHG: qpnp_lbc_main_probe: Failed to read DT properties rc=-517
- [ 6.041212] spmi qpnp-linear-charger-8: Driver qcom,qpnp-linear-charger requests probe deferral
- [ 6.050639] unable to find DT imem DLOAD mode node
- [ 6.054911] unable to find DT imem EDLOAD mode node
- [ 6.061142] qpnp_vadc_get_temp: VADC read error with -517
- [ 6.065509] thermal thermal_zone0: failed to read out thermal zone 0
- [ 6.072186] qpnp_vadc_get_temp: VADC read error with -517
- [ 6.077225] thermal thermal_zone1: failed to read out thermal zone 1
- [ 6.083893] qpnp_vadc_get_temp: VADC read error with -517
- [ 6.088946] thermal thermal_zone2: failed to read out thermal zone 2
- [ 6.115837] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
- [ 6.123659] device-mapper: req-crypt: dm-req-crypt successfully initalized.
- [ 6.123659]
- [ 6.132245] cpuidle: using governor ladder
- [ 6.135738] cpuidle: using governor menu
- [ 6.139700] sdhci: Secure Digital Host Controller Interface driver
- [ 6.145862] sdhci: Copyright(c) Pierre Ossman
- [ 6.150185] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 6.164052] sdhci_msm 7824900.sdhci: host_use_default_qos = 1
- [ 6.168768] sdhci_msm 7824900.sdhci: For qos_policy(default qos) = 0, tbl_sz = 3, qos type = 2
- [ 6.177414] sdhci_msm 7824900.sdhci: dma_latency = 2
- [ 6.182431] sdhci_msm 7824900.sdhci: dma_latency = 241
- [ 6.187600] sdhci_msm 7824900.sdhci: dma_latency = 501
- [ 6.192851] sdhci_msm 7824900.sdhci: For qos_policy(modified dynamic qos) = 1, tbl_sz = 1, qos type = 2
- [ 6.202223] sdhci_msm 7824900.sdhci: dma_latency = 200
- [ 6.207395] sdhci_msm 7824900.sdhci: For qos_policy(modified dynamic qos) = 2, tbl_sz = 1, qos type = 2
- [ 6.216808] sdhci_msm 7824900.sdhci: dma_latency = 200
- [ 6.222013] sdhci_msm 7824900.sdhci: Host using default pm_qos
- [ 6.229353] mmc0: no vqmmc regulator found
- [ 6.232481] mmc0: no vmmc regulator found
- [ 6.266172] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 32-bit ADMA
- [ 6.288489] sdhci_msm 7864900.sdhci: host_use_default_qos = 1
- [ 6.293259] sdhci_msm 7864900.sdhci: For qos_policy(default qos) = 0, tbl_sz = 3, qos type = 2
- [ 6.301859] sdhci_msm 7864900.sdhci: dma_latency = 2
- [ 6.306832] sdhci_msm 7864900.sdhci: dma_latency = 241
- [ 6.312080] sdhci_msm 7864900.sdhci: dma_latency = 501
- [ 6.317250] sdhci_msm 7864900.sdhci: For qos_policy(modified dynamic qos) = 1, tbl_sz = 1, qos type = 2
- [ 6.326669] sdhci_msm 7864900.sdhci: dma_latency = 200
- [ 6.331869] sdhci_msm 7864900.sdhci: For qos_policy(modified dynamic qos) = 2, tbl_sz = 1, qos type = 2
- [ 6.341242] sdhci_msm 7864900.sdhci: dma_latency = 200
- [ 6.346415] sdhci_msm 7864900.sdhci: Host using default pm_qos
- [ 6.354088] mmc1: no vqmmc regulator found
- [ 6.357152] mmc1: no vmmc regulator found
- [ 6.387531] mmc0: BKOPS_EN bit = 0
- [ 6.391622] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 32-bit ADMA
- [ 6.398959] qcom,leds-qpnp: probe of leds-qpnp-7 failed with error -10
- [ 6.406887] mmc0: new HS200 MMC card at address 0001
- [ 6.412343] mmcblk0: mmc0:0001 HAG4a2 14.6 GiB
- [ 6.416888] mmcblk0rpmb: mmc0:0001 HAG4a2 partition 3 4.00 MiB
- [ 6.425901] qce 720000.qcedev: Qualcomm Crypto 5.3.1 device found @0x720000
- [ 6.427376] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33
- [ 6.444875] qce 720000.qcedev: CE device = 0x0
- [ 6.444875] , IO base, CE = 0xf0680000
- [ 6.444875] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
- [ 6.444875] IO base BAM = 0x (null)
- [ 6.444875] BAM IRQ 239
- [ 6.444875] Engines Availability = 0x2010853
- [ 6.468954] sps:BAM 0x00704000 is registered.
- [ 6.479481] sps:BAM 0x00704000 (va:0xf06c0000) enabled: ver:0x25, number of pipes:8
- [ 6.492840] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 239
- [ 6.500531] qcedev: FIPS140-2 Known Answer Tests : Skipped
- [ 6.507509] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x720000
- [ 6.514080] qcrypto 720000.qcrypto: CE device = 0x0
- [ 6.514080] , IO base, CE = 0xf07c0000
- [ 6.514080] , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
- [ 6.514080] IO base BAM = 0x (null)
- [ 6.514080] BAM IRQ 239
- [ 6.514080] Engines Availability = 0x2010853
- [ 6.551177] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 239
- [ 6.558841] qcrypto 720000.qcrypto: qcrypto-ecb-aes
- [ 6.562959] qcrypto 720000.qcrypto: qcrypto-cbc-aes
- [ 6.567803] qcrypto 720000.qcrypto: qcrypto-ctr-aes
- [ 6.572749] qcrypto 720000.qcrypto: qcrypto-ecb-des
- [ 6.577506] qcrypto 720000.qcrypto: qcrypto-cbc-des
- [ 6.582404] qcrypto 720000.qcrypto: qcrypto-ecb-3des
- [ 6.587269] qcrypto 720000.qcrypto: qcrypto-cbc-3des
- [ 6.592298] qcrypto 720000.qcrypto: qcrypto-xts-aes
- [ 6.597121] qcrypto 720000.qcrypto: qcrypto-sha1
- [ 6.601836] qcrypto 720000.qcrypto: qcrypto-sha256
- [ 6.606497] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
- [ 6.612703] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
- [ 6.618789] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
- [ 6.625113] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
- [ 6.631529] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
- [ 6.637743] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
- [ 6.644204] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
- [ 6.649245] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
- [ 6.654472] qcrypto 720000.qcrypto: qcrypto-aes-ccm
- [ 6.659273] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
- [ 6.664641] qcrypto: FIPS140-2 Known Answer Tests: Skipped
- [ 6.671330] usbcore: registered new interface driver usbhid
- [ 6.675862] usbhid: USB HID core driver
- [ 6.680586] zram: Created 1 device(s) ...
- [ 6.684677] ashmem: initialized
- [ 6.688382] logger: created 256K log 'log_main'
- [ 6.693417] logger: created 256K log 'log_events'
- [ 6.698571] logger: created 256K log 'log_radio'
- [ 6.703676] logger: created 256K log 'log_system'
- [ 6.708557] sps:BAM 0x078c4000 is registered.
- [ 6.712465] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
- [ 6.722460] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
- [ 6.734743] input: qpnp_pon as /devices/virtual/input/input2
- [ 6.742675] PMIC@SID0: PM8909 v1.1 options: 0, 2, 0, 0
- [ 6.771247] populate_opp_table: clock-a7: OPP tables populated (cpu 3)
- [ 6.776749] print_opp_table: clock_cpu: a7: OPP voltage for 400000000: 4
- [ 6.783476] print_opp_table: clock_cpu: a7: OPP voltage for 1094400000: 7
- [ 6.792399] bimc-bwmon 410000.qcom,gpu-bwmon: BW HWmon governor registered.
- [ 6.798560] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
- [ 6.809023] devfreq qcom,cpubw.32: Couldn't update frequency transition information.
- [ 6.822334] coresight-fuse 5e01c.fuse: Fuse initialized
- [ 6.827473] coresight-cti 810000.cti: CTI initialized
- [ 6.832062] coresight-cti 811000.cti: CTI initialized
- [ 6.836878] coresight-cti 812000.cti: CTI initialized
- [ 6.842010] coresight-cti 813000.cti: CTI initialized
- [ 6.847023] coresight-cti 814000.cti: CTI initialized
- [ 6.852082] coresight-cti 815000.cti: CTI initialized
- [ 6.857510] coresight-cti 816000.cti: CTI initialized
- [ 6.862233] coresight-cti 817000.cti: CTI initialized
- [ 6.867090] coresight-cti 818000.cti: CTI initialized
- [ 6.872239] coresight-cti 851000.cti: CTI initialized
- [ 6.877211] coresight-cti 852000.cti: CTI initialized
- [ 6.882285] coresight-cti 853000.cti: CTI initialized
- [ 6.887295] coresight-cti 854000.cti: CTI initialized
- [ 6.892410] coresight-cti 83c000.cti: CTI initialized
- [ 6.897302] coresight-cti 838000.cti: CTI initialized
- [ 6.902489] coresight-cti 835000.cti: CTI initialized
- [ 6.907409] coresight-cti 830000.cti: CTI initialized
- [ 6.913065] coresight-csr 801000.csr: CSR initialized
- [ 6.918068] coresight-tmc 826000.tmc: Byte Counter feature enabled
- [ 6.923534] sps:BAM 0x00884000 is registered.
- [ 6.928040] coresight-tmc 826000.tmc: TMC initialized
- [ 6.933322] coresight-tmc 825000.tmc: TMC initialized
- [ 6.941147] nidnt boot config: 0
- [ 6.945344] coresight-tpiu 820000.tpiu: NIDnT on SDCARD only mode
- [ 6.950687] coresight-tpiu 820000.tpiu: TPIU initialized
- [ 6.956675] coresight-funnel 821000.funnel: FUNNEL initialized
- [ 6.961823] coresight-funnel 869000.funnel: FUNNEL initialized
- [ 6.967604] coresight-funnel 868000.funnel: FUNNEL initialized
- [ 6.973461] coresight-funnel 855000.funnel: FUNNEL initialized
- [ 6.979834] coresight-replicator 824000.replicator: REPLICATOR initialized
- [ 6.986619] coresight-dbgui 86d000.dbgui: DebugUI capture enabled
- [ 6.992155] coresight-dbgui 86d000.dbgui: DebugUI initializaed
- [ 6.998708] coresight-stm 802000.stm: STM initialized
- [ 7.003679] coresight-hwevent 86c000.hwevent: Hardware Event driver initialized
- [ 7.011264] coresight-etm 84c000.etm: ETM initialized
- [ 7.015935] coresight-etm 84d000.etm: ETM initialized
- [ 7.021033] coresight-etm 84e000.etm: ETM initialized
- [ 7.025890] coresight-etm 84f000.etm: ETM initialized
- [ 7.032167] coresight-modem-etm modem_etm0.26: Modem ETM initialized
- [ 7.038793] coresight-wcn-etm wcn_etm0.25: Wireless ETM initialized
- [ 7.045404] coresight-rpm-etm rpm_etm0.24: RPM ETM initialized
- [ 7.051573] coresight-qpdi 1941000.qpdi: CoreSight QPDI driver initialized
- [ 7.058225] usbcore: registered new interface driver snd-usb-audio
- [ 7.065384] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
- [ 7.072135] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 7.101265] msm-pcm-lpa qcom,msm-pcm-lpa.46: msm_pcm_probe: dev name qcom,msm-pcm-lpa.46
- [ 7.109703] platform qcom,msm-voip-dsp.48: Driver msm-voip-dsp requests probe deferral
- [ 7.117344] platform qcom,msm-pcm-voice.49: Driver msm-pcm-voice requests probe deferral
- [ 7.137092] msm8x16-asoc-wcd sound.71: default codec configured
- [ 7.144827] msm8x16-asoc-wcd sound.71: ASoC: platform (null) not registered
- [ 7.150949] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
- [ 7.157925] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
- [ 7.165564] u32 classifier
- [ 7.167502] Actions configured
- [ 7.170970] Netfilter messages via NETLINK v0.30.
- [ 7.175722] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 7.182885] ctnetlink v0.93: registering with nfnetlink.
- [ 7.188105] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- [ 7.194259] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- [ 7.200850] xt_time: kernel timezone is -0000
- [ 7.204724] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 7.209991] arp_tables: (C) 2002 David S. Miller
- [ 7.214281] TCP: cubic registered
- [ 7.217455] Initializing XFRM netlink socket
- [ 7.223125] NET: Registered protocol family 10
- [ 7.228142] mip6: Mobile IPv6
- [ 7.230254] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 7.235825] sit: IPv6 over IPv4 tunneling driver
- [ 7.241147] NET: Registered protocol family 17
- [ 7.244594] NET: Registered protocol family 15
- [ 7.249163] Bridge firewalling registered
- [ 7.253118] Ebtables v2.0 registered
- [ 7.256981] Bluetooth: ee855ef0
- [ 7.259529] Bluetooth: ee855ef0Bluetooth: ee855f00
- [ 7.264259] Bluetooth: ee855ed8Bluetooth: ee855ed8
- [ 7.269048] Bluetooth: ee855ed0Bluetooth: ee855f10
- [ 7.273824] Bluetooth: ee855f10[ 7.277024] l2tp_core: L2TP core driver, V2.0
- [ 7.281393] l2tp_ppp: PPPoL2TP kernel driver, V2.0
- [ 7.286045] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
- [ 7.291705] l2tp_netlink: L2TP netlink interface
- [ 7.296260] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
- [ 7.302260] l2tp_debugfs: L2TP debugfs support
- [ 7.306531] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
- [ 7.326667] of_batterydata_read_data: palladium_1500mah loaded
- [ 7.343519] BMS: bms_load_hw_defaults: BMS_EN=1 Sample_Interval-S1=[100]S2=[70] Sample_Count-S1=[256]S2=[128] Fifo_Length-S1=[5]S2=[5] FSM_state=2
- [ 7.363728] BMS: calculate_initial_soc: warm_reset=0 est_ocv=0 shutdown_soc_invalid=0 shutdown_ocv=4016000 shutdown_soc=83 last_soc=83 calculated_soc=83 last_ocv_uv=4016000
- [ 7.392776] BMS: qpnp_vm_bms_probe: probe success: soc=83 vbatt=3953937 ocv=4016000 warm_reset=0
- [ 7.496567] CHG: qpnp_lbc_main_probe: Probe chg_dis=0 bpd=1 usb=1 batt_pres=1 batt_volt=3969232 soc=83
- [ 7.505227] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
- [ 7.512848] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 7.540444] msm8x16-asoc-wcd sound.71: default codec configured
- [ 7.548466] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
- [ 7.554314] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
- [ 7.561403] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
- [ 7.568321] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
- [ 7.575989] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 7.584629] Registering SWP/SWPB emulation handler
- [ 7.589958] Loading module verification certificates
- [ 7.602929] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 0c72b4353433056b2cc9d98393df985ebf3803cb'
- [ 7.790856] oem_otg_ext_vreg: disabling
- [ 7.793665] spk_vreg: disabling
- [ 7.796835] regulator-dummy: disabling
- [ 7.801815] msm8x16-asoc-wcd sound.71: default codec configured
- [ 7.809572] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
- [ 7.815385] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
- [ 7.822594] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
- [ 7.829442] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
- [ 7.837092] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 7.847262] file system registered
- [ 7.849818] mbim_init: initialize 1 instances
- [ 7.854098] mbim_init: Initialized 1 ports
- [ 7.858044] mbim_bam_setup: no_ports:1
- [ 7.862128] mbim_bam_setup: Initialized 1 ports
- [ 7.868879] rndis_qc_init: initialize rndis QC instance
- [ 7.874173] android_usb gadget: Mass Storage Function, version: 2009/09/11
- [ 7.880064] android_usb gadget: Number of LUNs=1
- [ 7.884615] lun0: LUN: removable file: (no medium)
- [ 7.890320] android_usb gadget: android_usb ready
- [ 7.894167] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 16
- [ 7.900175] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
- [ 7.908007] msm8x16-asoc-wcd sound.71: default codec configured
- [ 7.910748] input: gpio-keys as /devices/soc.0/gpio_keys.70/input/input3
- [ 7.919918] qcom,qpnp-rtc qpnp-rtc-6: setting system clock to 1970-01-01 00:09:18 UTC (558)
- [ 7.922739] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
- [ 7.922804] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
- [ 7.923099] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
- [ 7.923256] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
- [ 7.923343] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 7.924276] msm8x16-asoc-wcd sound.71: default codec configured
- [ 7.927121] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
- [ 7.927174] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
- [ 7.927455] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
- [ 7.992408] msm_thermal:interrupt_mode_init Interrupt mode init
- [ 7.997301] msm_thermal:disable_msm_thermal Max frequency reset for CPU0
- [ 8.004868] msm_thermal:disable_msm_thermal Max frequency reset for CPU1
- [ 8.010742] msm_thermal:disable_msm_thermal Max frequency reset for CPU2
- [ 8.017369] msm_thermal:disable_msm_thermal Max frequency reset for CPU3
- [ 8.026702] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
- [ 8.027479] /soc/qcom,lpm-levels/qcom,pm-cluster@0: No CPU phandle, assuming single cluster
- [ 8.041819] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 8.050216] msm8x16-asoc-wcd sound.71: default codec configured
- [ 8.053103] led_gpio_flash_probe:probe successfully!
- [ 8.057264] qcom,cc-debug-8909 1874000.qcom,cc-debug: Registered Debug Mux successfully
- [ 8.058001] ---+++ get pwm-freq prop failed
- [ 8.058004] ---+++ get pwm-duty prop failed
- [ 8.058124] ---+++ gpio_clk_probe succeeded
- [ 8.058508] clock_late_init: Removing enables held for handed-off clocks
- [ 8.061447] ALSA device list:
- [ 8.061450] No soundcards [ 8.094624] Freeing unused kernel memory: 396K (c1100000 - c1163000)
- [ 8.096083] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
- [ 8.096133] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
- [ 8.096281] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
- [ 8.096427] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
- [ 8.096493] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 8.097241] msm8x16-asoc-wcd sound.71: default codec configured
- [ 8.099346] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
- [ 8.099389] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
- [ 8.099523] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
- [ 8.166862] init: init first stage started!
- [ 8.291953] type=1403 audit(558.869:2): policy loaded auid=4294967295 ses=4294967295
- [ 8.300123] type=1404 audit(558.879:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
- [ 8.430135] init: (Initializing SELinux enforcing took 0.26s.)
- [ 8.444824] init: init second stage started!
- [ 8.461505] init: property_set("ro.boot.bootdevice", "7824900.sdhci") failed
- [ 8.475922] init: Running restorecon...
- [ 8.780999] init: waitpid failed: No child processes
- [ 8.785662] init: (Loading properties from /default.prop took 0.00s.)
- [ 8.796272] init: /init.rc: 679: invalid keyword 'setprop'
- [ 8.800914] init: /init.rc: 680: invalid keyword 'chmod'
- [ 8.806042] init: /init.rc: 681: invalid keyword 'chown'
- [ 8.811676] init: (Parsing /init.environ.rc took 0.00s.)
- [ 8.817868] init: (Parsing /init.usb.rc took 0.00s.)
- [ 8.826925] init: /init.qcom.rc: 582: user requires 1 argument
- [ 8.834659] init: ignored duplicate definition of service 'RIDL'init: (Parsing init.qcom.usb.rc took 0.01s.)
- [ 8.856912] init: ignored duplicate definition of service 'perfd'init: init.target.rc: 151: invalid keyword 'load_all_props'
- [ 8.868256] init: ignored duplicate definition of service 'poweroffhandler'init: (Parsing init.carrier.rc took 0.01s.)
- [ 8.877931] init: (Parsing init.target.rc took 0.02s.)
- [ 8.884913] init: (Parsing init.qcom.factory.rc took 0.00s.)
- [ 8.889565] init: (Parsing /init.qcom.rc took 0.07s.)
- [ 8.897318] init: (Parsing /init.usb.configfs.rc took 0.00s.)
- [ 8.902370] init: (Parsing /init.zygote32.rc took 0.00s.)
- [ 8.907438] init: (Parsing /init.rc took 0.11s.)
- [ 8.913215] init: Starting service 'ueventd'...
- [ 8.919068] init: Waiting for /dev/.coldboot_done...
- [ 8.923438] ueventd: ueventd started!
- [ 9.963255] ueventd: Coldboot took 1.03s.
- [ 9.969326] init: Waiting for /dev/.coldboot_done took 1.05s.
- [ 9.993360] init: write_file: Unable to open '/proc/sys/kernel/hung_task_timeout_secs': No such file or directory
- [ 10.014532] init: write_file: Unable to open '/proc/sys/abi/swp': No such file or directory
- [ 10.126895] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: barrier=1
- [ 10.134516] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/system,target=/system,type=ext4)=0
- [ 10.144652] EXT4-fs (mmcblk0p33): Ignoring removed nomblk_io_submit option
- [ 10.157717] EXT4-fs (mmcblk0p33): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
- [ 10.167509] fs_mgr: check_fs(): mount(/dev/block/bootdevice/by-name/userdata,/data,ext4)=0: Success
- [ 10.178070] fs_mgr: check_fs(): unmount(/data) succeeded
- [ 10.183865] fs_mgr: Running /system/bin/e2fsck on /dev/block/bootdevice/by-name/userdata
- [ 11.019895] e2fsck (238) used greatest stack depth: 5332 bytes left
- [ 11.025489] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
- [ 11.025489]
- [ 11.031280] e2fsck: Pass 1: Checking inodes, blocks, and sizes
- [ 11.031280]
- [ 11.038416] e2fsck: Pass 2: Checking directory structure
- [ 11.038416]
- [ 11.045330] e2fsck: Pass 3: Checking directory connectivity
- [ 11.045330]
- [ 11.052257] e2fsck: Pass 4: Checking reference counts
- [ 11.052257]
- [ 11.058728] e2fsck: Pass 5: Checking group summary information
- [ 11.058728]
- [ 11.066094] e2fsck: data: 2580/316992 files (9.8% non-contiguous), 105479/1267451 blocks
- [ 11.066094]
- [ 11.081181] EXT4-fs (mmcblk0p33): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc,discard
- [ 11.090953] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/userdata,target=/data,type=ext4)=0
- [ 11.109884] init: (Parsing /system/etc/init/atrace.rc took 0.00s.)
- [ 11.115747] init: (Parsing /system/etc/init/audioserver.rc took 0.00s.)
- [ 11.122394] init: (Parsing /system/etc/init/bootanim.rc took 0.00s.)
- [ 11.128684] init: (Parsing /system/etc/init/bootstat.rc took 0.00s.)
- [ 11.135069] init: (Parsing /system/etc/init/cameraserver.rc took 0.00s.)
- [ 11.141641] init: (Parsing /system/etc/init/debuggerd.rc took 0.00s.)
- [ 11.148007] init: (Parsing /system/etc/init/drmserver.rc took 0.00s.)
- [ 11.154727] init: (Parsing /system/etc/init/dumpstate.rc took 0.00s.)
- [ 11.160872] init: (Parsing /system/etc/init/gatekeeperd.rc took 0.00s.)
- [ 11.167453] init: (Parsing /system/etc/init/init-debug.rc took 0.00s.)
- [ 11.173975] init: (Parsing /system/etc/init/installd.rc took 0.00s.)
- [ 11.180385] init: (Parsing /system/etc/init/keystore.rc took 0.00s.)
- [ 11.186640] init: (Parsing /system/etc/init/lmkd.rc took 0.00s.)
- [ 11.193165] init: (Parsing /system/etc/init/logcatd.rc took 0.00s.)
- [ 11.199079] init: (Parsing /system/etc/init/logd.rc took 0.00s.)
- [ 11.205105] init: (Parsing /system/etc/init/mdnsd.rc took 0.00s.)
- [ 11.211194] init: (Parsing /system/etc/init/mediacodec.rc took 0.00s.)
- [ 11.217511] init: (Parsing /system/etc/init/mediadrmserver.rc took 0.00s.)
- [ 11.224497] init: (Parsing /system/etc/init/mediaextractor.rc took 0.00s.)
- [ 11.231422] init: (Parsing /system/etc/init/mediaserver.rc took 0.00s.)
- [ 11.237849] init: (Parsing /system/etc/init/mtpd.rc took 0.00s.)
- [ 11.244032] init: (Parsing /system/etc/init/netd.rc took 0.00s.)
- [ 11.249919] init: (Parsing /system/etc/init/perfprofd.rc took 0.00s.)
- [ 11.256228] init: (Parsing /system/etc/init/racoon.rc took 0.00s.)
- [ 11.262553] init: (Parsing /system/etc/init/rild.rc took 0.00s.)
- [ 11.268453] init: (Parsing /system/etc/init/servicemanager.rc took 0.00s.)
- [ 11.275405] init: (Parsing /system/etc/init/surfaceflinger.rc took 0.00s.)
- [ 11.282379] init: (Parsing /system/etc/init/uncrypt.rc took 0.00s.)
- [ 11.288444] init: (Parsing /system/etc/init/vdc.rc took 0.00s.)
- [ 11.294450] init: (Parsing /system/etc/init/vold.rc took 0.00s.)
- [ 11.307413] EXT4-fs (mmcblk0p23): warning: maximal mount count reached, running e2fsck is recommended
- [ 11.316311] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: barrier=1
- [ 11.331423] EXT4-fs (mmcblk0p22): warning: maximal mount count reached, running e2fsck is recommended
- [ 11.340227] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: barrier=1
- [ 11.358848] EXT4-fs (mmcblk0p27): VFS: Can't find ext4 filesystem
- [ 11.366548] init: Starting service 'logd'...
- [ 11.424803] logd.auditd: start
- [ 11.426861] logd.klogd: 11417118797
- [ 12.189473] init: (Loading properties from /system/vendor/Default/system/vendor/vendor.prop took 0.00s.)
- [ 12.198214] init: (Loading properties from /persist/speccfg/vendor_ro.prop took 0.01s.)
- [ 12.209389] init: (Loading properties from /system/vendor/vendor.prop took 0.00s.)
- [ 12.217174] init: (Loading properties from /system/vendor/Default/system/vendor/vendor.prop took 0.00s.)
- [ 12.225759] init: (Loading properties from /persist/speccfg/vendor_persist.prop took 0.01s.)
- [ 12.235062] init: property_set("ro.telephony.default_network", "22,20") failed
- [ 12.241518] init: (Loading properties from /system/vendor/default.prop took 0.01s.)
- [ 12.248958] init: (Loading properties from /system/vendor/power.prop took 0.00s.)
- [ 12.256438] init: (Loading properties from /system/build.prop took 0.07s.)
- [ 12.263385] init: (Loading properties from /vendor/build.prop took 0.00s.)
- [ 12.270171] init: (Loading properties from /factory/factory.prop took 0.00s.)
- [ 12.277479] init: /recovery not specified in fstab
- [ 12.283075] init: Starting service 'debuggerd'...
- [ 12.287945] init: do_start: Service debuggerd64 not found
- [ 12.295607] init: Starting service 'vold'...
- [ 12.302524] init: Not bootcharting.
- [ 12.579974] init: Starting service 'exec 1 (/system/bin/tzdatacheck)'...
- [ 12.619097] init: Service 'exec 1 (/system/bin/tzdatacheck)' (pid 262) exited with status 0
- [ 12.685136] init: Starting service 'carrier_switcher'...
- [ 12.692376] init: (Loading properties from /data/local.prop took 0.00s.)
- [ 12.859469] init: Starting service 'logd-reinit'...
- [ 12.865177] init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}'
- [ 12.875528] init: write: cannot expand '${persist.sys.ssr.enable_debug}'
- [ 12.881993] init: property 'persist.sys.mba_boot_timeout' doesn't exist while expanding '${persist.sys.mba_boot_timeout}'
- [ 12.892856] init: write: cannot expand '${persist.sys.mba_boot_timeout}'
- [ 12.899497] init: property 'persist.sys.modem_auth_timeout' doesn't exist while expanding '${persist.sys.modem_auth_timeout}'
- [ 12.910716] logd.daemon: reinit
- [ 12.910818] init: write: cannot expand '${persist.sys.modem_auth_timeout}'
- [ 12.910890] init: property 'persist.sys.pil_proxy_timeout' doesn't exist while expanding '${persist.sys.pil_proxy_timeout}'
- [ 12.910912] init: write: cannot expand '${persist.sys.pil_proxy_timeout}'
- [ 12.941245] pil-q6v5-mss 4080000.qcom,mss: modem: loading from 0x88000000 to 0x8d300000
- [ 12.966857] pil-q6v5-mss 4080000.qcom,mss: MBA: loading from 0xaf400000 to 0xaf500000
- [ 13.020138] pil-q6v5-mss 4080000.qcom,mss: MBA boot done
- [ 13.768856] pil-q6v5-mss 4080000.qcom,mss: modem: Brought out of reset
- [ 13.845766] pil-q6v5-mss 4080000.qcom,mss: Subsystem error monitoring/handling services are up
- [ 13.853510] pil-q6v5-mss 4080000.qcom,mss: modem: Power/Clock ready interrupt received
- [ 13.861432] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
- [ 13.861672] memshare: Modem Restart has happened
- [ 13.862248] init: Service 'carrier_switcher' (pid 263) exited with status 0
- [ 13.862514] M-Notify: General: 7
- [ 13.862560] init: Service 'logd-reinit' (pid 266) exited with status 0
- [ 13.862779] init: Starting service 'exec 2 (/init.qcom.early_boot.sh)'...
- [ 13.863667] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and modem's SSCTL service
- [ 13.908585] msm8x16-asoc-wcd sound.71: default codec configured
- [ 13.915923] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
- [ 13.921732] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
- [ 13.928588] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
- [ 13.938807] msm8x16-asoc-wcd sound.71: default codec configured
- [ 13.953041] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: no dapm match for VOICEMMODE1_DL --> VoiceMMode1 --> SEC_MI2S_RX_Voice Mixer
- [ 13.964416] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: Failed to add route VOICEMMODE1_DL -> VoiceMMode1 -> SEC_MI2S_RX_Voice Mixer
- [ 13.976486] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: no dapm match for VOICEMMODE2_DL --> VoiceMMode2 --> SEC_MI2S_RX_Voice Mixer
- [ 13.988570] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: Failed to add route VOICEMMODE2_DL -> VoiceMMode2 -> SEC_MI2S_RX_Voice Mixer
- [ 14.004836] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: no dapm match for VOICE2_STUB_DL --> Voice2 Stub --> INTERNAL_BT_SCO_RX_Voice Mixer
- [ 14.016700] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: Failed to add route VOICE2_STUB_DL -> Voice2 Stub -> INTERNAL_BT_SCO_RX_Voice Mixer
- [ 14.063206] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: mux SLIM_0_RX AANC MUX has no paths
- [ 14.090696] wcd-spmi-core msm8x16_wcd_codec-12: ASoC: mux RX3 MIX1 INP3 has no paths
- [ 14.097765] wcd-spmi-core msm8x16_wcd_codec-12: ASoC: mux RX2 MIX1 INP3 has no paths
- [ 14.122939] init: property_set("ro.opengles.version", "196608") failed
- [ 14.683464] init: Service 'exec 2 (/init.qcom.early_boot.sh)' (pid 288) exited with status 0
- [ 14.696453] init: Starting service 'healthd'...
- [ 14.701911] init: Starting service 'qcom-debug'...
- [ 14.706576] binder: 323:323 transaction failed 29189, size 0-0
- [ 14.707387] init: Starting service 'qcom-c_core-sh'...
- [ 14.709014] init: Starting service 'config_bluetooth'...
- [ 14.711211] init: Starting service 'qseecomd'...
- [ 14.713221] init: Starting service 'per_mgr'...
- [ 14.715285] init: Starting service 'lmkd'...
- [ 14.717417] init: Starting service 'servicemanager'...
- [ 14.719581] init: Starting service 'surfaceflinger'...
- [ 14.740454] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet0/accept_ra': No such file or directory
- [ 14.740528] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet1/accept_ra': No such file or directory
- [ 14.740594] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet2/accept_ra': No such file or directory
- [ 14.740659] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet3/accept_ra': No such file or directory
- [ 14.740723] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet4/accept_ra': No such file or directory
- [ 14.740787] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet5/accept_ra': No such file or directory
- [ 14.740862] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet6/accept_ra': No such file or directory
- [ 14.740929] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet7/accept_ra': No such file or directory
- [ 14.740996] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio0/accept_ra': No such file or directory
- [ 14.741071] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio1/accept_ra': No such file or directory
- [ 14.741147] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio2/accept_ra': No such file or directory
- [ 14.741214] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio3/accept_ra': No such file or directory
- [ 14.741282] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio4/accept_ra': No such file or directory
- [ 14.741358] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio5/accept_ra': No such file or directory
- [ 14.741428] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio6/accept_ra': No such file or directory
- [ 14.741493] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio7/accept_ra': No such file or directory
- [ 14.741559] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb0/accept_ra': No such file or directory
- [ 14.741626] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb1/accept_ra': No such file or directory
- [ 14.741694] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb2/accept_ra': No such file or directory
- [ 14.741767] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb3/accept_ra': No such file or directory
- [ 14.743036] init: Starting service 'rmt_storage'...
- [ 14.963254] init: insmod: open("/system/lib/modules/adsprpc.ko") failed: No such file or directoryinit: Starting service 'console'...
- [ 14.979650] enable_store: android_usb: already disabled
- [ 14.997486] init: Starting service 'adbd'...
- [ 15.021310] init: Starting service 'ppd'...
- [ 15.026182] init: cannot find '/system/bin/update_verifier' (No such file or directory), disabling 'exec 3 (/system/bin/update_verifier)'
- [ 15.058286] init: cannot find '/system/bin/install-recovery.sh' (No such file or directory), disabling 'flash_recovery'
- [ 15.069581] init: Starting service 'qcomsysd'...
- [ 15.092988] init: Starting service 'qcom-c_main-sh'...
- [ 15.099322] init: Starting service 'cnd'...
- [ 15.131105] init: Starting service 'irsc_util'...
- [ 15.143045] init: Starting service 'tftp_server'...
- [ 15.170548] init: Starting service 'ptt_socket_app'...
- [ 15.176764] init: Starting service 'cnss_diag'...
- [ 15.204725] init: Starting service 'atfwd_quec'...
- [ 15.231070] init: Starting service 'quecserver'...
- [ 15.253616] handle_qmi_request: Error getting req_desc for msg_id 36
- [ 15.254939] init: cannot find '/system/bin/usb_uicc_client' (No such file or directory), disabling 'usb_uicc_daemon'
- [ 15.255753] init: Starting service 'bms-sh'...
- [ 15.257643] init: Starting service 'qcom-usb-sh'...
- [ 15.258893] init: cannot find '/system/bin/qrngd' (No such file or directory), disabling 'qrngd'
- [ 15.285320] init: Starting service 'thermal-engine'...
- [ 15.302338] init: Starting service 'wcnss-service'...
- [ 15.308792] init: Starting service 'imsstarter'...
- [ 15.330683] init: cannot find '/system/bin/dts_configurator' (No such file or directory), disabling 'dts_configurator'
- msm8909:/ $ [ 15.363809] init: Starting service 'zygote'...
- [ 15.370029] mem_share_svc_recv_msg: Error receiving message
- [ 15.389365] init: Starting service 'audioserver'...
- [ 15.398603] diag: In diag_dci_write_proc, invalid data 0x00000000, peripheral: 0, len: 527
- [ 15.429621] init: Starting service 'cameraserver'...
- [ 15.452786] init: Starting service 'drm'...
- [ 15.458222] init: Starting service 'installd'...
- [ 15.478468] init: couldn't write 388 to /dev/cpuset/camera-daemon/tasks: No such file or directory
- [ 15.492443] init: Starting service 'keystore'...
- [ 15.498529] init: Starting service 'mediacodec'...
- [ 15.523520] init: Starting service 'mediadrm'...
- [ 15.540702] init: Starting service 'mediaextractor'...
- [ 15.547154] init: Starting service 'media'...
- [ 15.560859] init: Starting service 'netd'...
- [ 15.566370] init: Starting service 'ril-daemon'...
- [ 15.575567] init: Starting service 'dpmd'...
- [ 15.596010] gbam_connect_work: Bam channel is not ready
- [ 15.606060] init: Starting service 'cnss-daemon'...
- [ 15.618947] init: Starting service 'loc_launcher'...
- [ 15.626579] init: Starting service 'qcom-sh'...
- [ 15.635566] init: Service fuse_uicc0 does not have a SELinux domain defined.
- [ 15.679314] init: Starting service 'RIDL'...
- [ 15.685023] init: Starting service 'fidodaemon'...
- [ 15.707374] init: Starting service 'qcamerasvr'...
- [ 15.726630] init: Starting service 'time_daemon'...
- [ 15.758319] init: Starting service 'audiod'...
- [ 15.765815] init: Starting service 'gatekeeperd'...
- [ 15.862874] init: Starting service 'perfprofd'...
- [ 15.868186] init: Service 'qcom-debug' (pid 324) exited with status 0
- [ 15.951672] init: Service 'qcom-c_core-sh' (pid 325) exited with status 0
- [ 15.960541] init: Service 'irsc_util' (pid 358) exited with status 0
- [ 15.975094] healthd: BatteryTechnologyPath not found
- [ 15.988150] init: Service 'cnss_diag' (pid 364) exited with status 255
- [ 15.989987] healthd: BatteryFullChargePath not found
- [ 15.990003] healthd: BatteryCycleCountPath not found
- [ 16.087241] QSEECOM: qseecom_load_app: App (keymaste) does'nt exist, loading apps for first time
- [ 16.108603] QSEECOM: qseecom_load_app: App with id 2 (keymaste) now loaded
- [ 16.183814] IPC_RTR: ipc_router_set_conn: Invalid remote endpoint
- [ 16.466738] init: Starting service 'imsqmidaemon'...
- [ 16.538187] init: Starting service 'qmuxd'...
- [ 16.579302] init: Service 'imsstarter' (pid 378) exited with status 0
- [ 16.707096] init: Starting service 'vm_bms'...
- [ 16.734366] init: Service 'bms-sh' (pid 370) exited with status 0
- [ 16.817135] init: cannot find '/system/bin/ipacm-diag' (No such file or directory), disabling 'ipacm-diag'
- [ 16.929112] init: Starting service 'imsdatadaemon'...
- [ 16.941009] devbw qcom,gpubw.23: Governor already resumed!
- [ 16.945471] devbw qcom,gpubw.23: Unable to resume BW HW mon governor (-16)
- [ 17.146820] init: cannot find '/system/bin/ipacm' (No such file or directory), disabling 'ipacm'
- [ 17.729031] init: Starting service 'ril-daemon2'...
- [ 18.014184] init: Starting service 'qti'...
- [ 18.165783] init: Starting service 'bootanim'...
- [ 18.251074] init: Starting service 'netmgrd'...
- [ 18.462529] init: Service 'qcom-c_main-sh' (pid 348) exited with status 0
- [ 18.653783] init: Service 'qcom-usb-sh' (pid 371) exited with status 0
- [ 19.006355] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
- [ 19.029340] msm_dolby_dap_param_to_get_control_get, port_id not set, do not query ADM
- [ 19.036591] msm_dolby_dap_param_visualizer_control_get Incorrect VCNB length
- [ 19.050358] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
- [ 19.057191] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
- [ 19.075165] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 19.090033] msm_audio_sound_focus_get: Could not get copp idx for port_id=16385
- [ 19.096426] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 19.105860] msm_audio_source_tracking_get: Could not get copp idx for port_id=16385
- [ 19.122086] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
- [ 19.128567] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
- [ 19.149964] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 19.161739] msm_audio_sound_focus_get: Could not get copp idx for port_id=4101
- [ 19.175511] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 19.189867] msm_audio_sound_focus_get: Could not get copp idx for port_id=4103
- [ 19.202886] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 19.216557] msm_audio_source_tracking_get: Could not get copp idx for port_id=4103
- [ 19.234139] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 19.246654] msm_audio_source_tracking_get: Could not get copp idx for port_id=4101
- [ 19.325106] msm_pcm_volume_ctl_get substream runtime not found
- [ 19.338240] msm_pcm_volume_ctl_get substream runtime not found
- [ 19.360363] msm_pcm_volume_ctl_get substream runtime not found
- [ 19.365760] msm_pcm_volume_ctl_get substream runtime not found
- [ 19.376166] msm_pcm_volume_ctl_get substream or runtime not found
- [ 19.387682] msm_pcm_volume_ctl_get substream runtime not found
- [ 19.672651] wcdcal_hwdep_ioctl_shared: codec didn't set this 0!!
- [ 19.677975] wcdcal_hwdep_ioctl_shared: codec didn't set this 1!!
- [ 19.725000] wcdcal_hwdep_ioctl_shared: codec didn't set this 3!!
- [ 19.774367] msm_ds2_dap_set_security_control: dmid 0 license key 0
- [ 19.779554] core_set_license: Invalid cal block to send
- [ 19.811099] msm_ds2_dap_set_security_control: failed to set dolby license[ 19.842693] wcdcal_hwdep_ioctl_shared: codec didn't set this 0!!
- [ 19.848683] wcdcal_hwdep_ioctl_shared: codec didn't set this 1!!
- [ 19.870388] wcdcal_hwdep_ioctl_shared: codec didn't set this 3!!
- [ 20.376056] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
- [ 20.410165] msm_dolby_dap_param_to_get_control_get, port_id not set, do not query ADM
- [ 20.417212] msm_dolby_dap_param_visualizer_control_get Incorrect VCNB length
- [ 20.442417] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
- [ 20.449176] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
- [ 20.469988] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 20.475406] msm_audio_sound_focus_get: Could not get copp idx for port_id=16385
- [ 20.484794] cp (555) used greatest stack depth: 5048 bytes left
- [ 20.487406] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 20.487414] msm_audio_source_tracking_get: Could not get copp idx for port_id=16385
- [ 20.487493] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
- [ 20.487554] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
- [ 20.487601] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 20.487605] msm_audio_sound_focus_get: Could not get copp idx for port_id=4101
- [ 20.487696] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 20.487700] msm_audio_sound_focus_get: Could not get copp idx for port_id=4103
- [ 20.487750] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 20.487754] msm_audio_source_tracking_get: Could not get copp idx for port_id=4103
- [ 20.487832] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 20.487837] msm_audio_source_tracking_get: Could not get copp idx for port_id=4101
- [ 20.521527] msm_pcm_volume_ctl_get substream runtime not found
- [ 20.521639] msm_pcm_volume_ctl_get substream runtime not found
- [ 20.522062] msm_pcm_volume_ctl_get substream runtime not found
- [ 20.522177] msm_pcm_volume_ctl_get substream runtime not found
- [ 20.522218] msm_pcm_volume_ctl_get substream or runtime not found
- [ 20.522606] msm_pcm_volume_ctl_get substream runtime not found
- [ 21.089442] init: Service 'qcom-sh' (pid 412) exited with status 0
- [ 21.172184] msm_camera_fill_vreg_params:65 i 2 j 0 cam_vio
- [ 21.176701] msm_camera_fill_vreg_params:76 i 3 j 1 cam_vana
- [ 21.189993] msm_camera_fill_vreg_params:76 i 4 j 1 cam_vana
- [ 21.194857] msm_camera_fill_vreg_params:65 i 5 j 0 cam_vio
- [ 21.240018] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x30 MSTR_STS:0x0d1300c8 OPER:0x00000010
- [ 21.254972] msm_sensor_match_id: hi259: read id failed
- [ 21.259909] msm_sensor_check_id:1336 match id failed rc -107
- [ 21.349205] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x30 MSTR_STS:0x0d1300c8 OPER:0x00000010
- [ 21.364046] msm_sensor_match_id: hi259: read id failed
- [ 21.369411] msm_sensor_check_id:1336 match id failed rc -107
- [ 21.460017] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x30 MSTR_STS:0x0d1300c8 OPER:0x00000010
- [ 21.474839] msm_sensor_match_id: hi259: read id failed
- [ 21.480493] msm_sensor_check_id:1336 match id failed rc -107
- [ 21.529817] hi259 power up failed
- [ 21.532019] MSM-SENSOR-INIT msm_sensor_driver_cmd:80 failed: msm_sensor_driver_probe rc -107
- [ 21.558877] msm_camera_fill_vreg_params:65 i 0 j 1 cam_vio
- [ 21.569828] msm_camera_fill_vreg_params:76 i 1 j 2 cam_vana
- [ 21.574388] msm_camera_fill_vreg_params:76 i 5 j 2 cam_vana
- [ 21.589803] msm_camera_fill_vreg_params:65 i 6 j 1 cam_vio
- [ 21.623919] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:2) mode:FIFO slv_addr:0x20 MSTR_STS:0x0d1300c8 OPER:0x00000010
- [ 21.638717] msm_sensor_match_id: hi843_8909: read id failed
- [ 21.646207] msm_sensor_check_id:1336 match id failed rc -107
- [ 21.647299] configuring dma source while dma is active
- [ 21.728107] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:2) mode:FIFO slv_addr:0x20 MSTR_STS:0x0d1300c8 OPER:0x00000010
- [ 21.743251] msm_sensor_match_id: hi843_8909: read id failed
- [ 21.748431] msm_sensor_check_id:1336 match id failed rc -107
- [ 21.828155] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:2) mode:FIFO slv_addr:0x20 MSTR_STS:0x0d1300c8 OPER:0x00000010
- [ 21.842968] msm_sensor_match_id: hi843_8909: read id failed
- [ 21.849542] msm_sensor_check_id:1336 match id failed rc -107
- [ 21.899807] hi843_8909 power up failed
- [ 21.902401] MSM-SENSOR-INIT msm_sensor_driver_cmd:80 failed: msm_sensor_driver_probe rc -107
- [ 21.941456] msm_isp_close_node: halt timeout rc=0
- [ 22.057164] init: Service 'RIDL' (pid 415) exited with status 65
- [ 22.253574] Couldn't get snoc_qosgen
- [ 22.449511] IPC_RTR: msm_ipc_router_send_to: permission failure for rild
- [ 22.457253] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -1
- [ 22.462759] IPC_RTR: msm_ipc_router_send_to: permission failure for rild
- [ 22.468832] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -1
- [ 22.980654] wcnss: no space available for smd frame
- [ 23.009920] wcnss: no space available for smd frame
- [ 23.047158] wcnss: no space available for smd frame
- [ 23.079865] wcnss: no space available for smd frame
- [ 23.099398] IPC_RTR: msm_ipc_router_send_to: permission failure for rild
- [ 23.109937] wcnss: no space available for smd frame
- [ 23.112912] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -1
- [ 23.113264] IPC_RTR: msm_ipc_router_send_to: permission failure for rild
- [ 23.113268] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -1
- [ 23.159853] wcnss: no space available for smd frame
- [ 23.315452] init: property_set("ro.ril.svlte1x", "false") failed
- [ 23.322277] init: property_set("ro.ril.svdo", "false") failed
- [ 23.464300] init: Service 'config_bluetooth' (pid 326) exited with status 0
- [ 33.033783] wcnss_service (377) used greatest stack depth: 4448 bytes left
- [ 33.201896] init: Service 'wcnss-service' (pid 377) exited with status 0
- [ 37.856456] init: Service 'bootanim' (pid 541) exited with status 0
- [ 38.019426] init: Starting service 'qti-testscripts'...
- [ 38.032623] init: Starting service 'atfwd'...
- [ 38.038714] init: Starting service 'dmclient'...
- [ 38.067951] init: cannot find '/system/bin/qrngp' (No such file or directory), disabling 'qrngp'
- [ 38.077742] init: Starting service 'exec 4 (/system/bin/bootstat)'...
- [ 38.099472] type=1400 audit(588.719:4): avc: denied { getattr } for pid=4070 comm="dmclient" path="/vendor" dev="rootfs" ino=7616 scontext=u:r:dmclient:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=0
- [ 38.152467] init: Service 'qti-testscripts' (pid 4058) exited with status 0
- [ 38.168383] init: Service 'exec 4 (/system/bin/bootstat)' (pid 4071) exited with status 0
- [ 38.177536] init: Starting service 'exec 5 (/system/bin/bootstat)'...
- [ 38.239341] init: Service 'exec 5 (/system/bin/bootstat)' (pid 4075) exited with status 0
- [ 38.247773] init: Starting service 'exec 6 (/system/bin/bootstat)'...
- [ 38.303960] init: Service 'exec 6 (/system/bin/bootstat)' (pid 4082) exited with status 0
- [ 38.312015] init: Starting service 'exec 7 (/system/bin/bootstat)'...
- [ 38.357182] init: Service 'exec 7 (/system/bin/bootstat)' (pid 4085) exited with status 0
- [ 38.361783] core_ctl: module license 'BSD' taints kernel.
- [ 38.361786] Disabling lock debugging due to kernel taint
- [ 39.082296] init: Starting service 'perfd'...
- [ 39.099377] init: Service 'qcom-post-boot' (pid 4056) exited with status 0
- [ 40.542534] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x48 MSTR_STS:0x011363c8 OPER:0x00000090
- [ 40.557386] stk3x1x_software_reset: software reset: write i2c error, ret=-107
- [ 40.567475] stk_ps 1-0048: Failed to re-init device setting
- [ 40.572597] sensors stk3x1x-proximity: Invalid sensor class delay handle
- [ 42.227235] type=1400 audit(592.849:5): avc: denied { read } for pid=4468 comm="RenderThread" name="gpuclk" dev="sysfs" ino=10917 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:sysfs:s0 tclass=file permissive=0
- [ 44.068457] init: avc: granted { set } for property=net.lte.ims.data.enabled pid=3774 uid=1001 gid=1001 scontext=u:r:radio:s0 tcontext=u:object_r:net_radio_prop:s0 tclass=property_service
- [ 48.887939] binder: 4363: binder_alloc_buf, no vma
- [ 98.254790] type=1400 audit(648.879:6): avc: denied { read } for pid=4070 comm="dmclient" name="name" dev="sysfs" ino=10438 scontext=u:r:dmclient:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=0
- [ 98.353722] type=1400 audit(648.979:7): avc: denied { search } for pid=4070 comm="dmclient" name="/" dev="mmcblk0p23" ino=2 scontext=u:r:dmclient:s0 tcontext=u:object_r:cache_file:s0 tclass=dir permissive=0
- [ 120.458794] type=1400 audit(671.079:8): avc: denied { sys_ptrace } for pid=4113 comm="perfd" capability=19 scontext=u:r:perfd:s0 tcontext=u:r:perfd:s0 tclass=capability permissive=0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement