OpenSBI v1.0
   ____                    _____ ____ _____
  / __ \                  / ____|  _ \_   _|
 | |  | |_ __   ___ _ __ | (___ | |_) || |
 | |  | | '_ \ / _ \ '_ \ \___ \|  _ < | |
 | |__| | |_) |  __/ | | |____) | |_) || |_
  \____/| .__/ \___|_| |_|_____/|____/_____|
        | |
        |_|

fdt_reset_driver_init: gpio-restart init failed, -1001
Platform Name             : StarFive VisionFive V1
Platform Features         : medeleg
Platform HART Count       : 2
Platform IPI Device       : aclint-mswi
Platform Timer Device     : aclint-mtimer @ 6250000Hz
Platform Console Device   : uart8250
Platform HSM Device       : ---
Platform Reboot Device    : ---
Platform Shutdown Device  : ---
Firmware Base             : 0x80000000
Firmware Size             : 300 KB
Runtime SBI Version       : 0.3

Domain0 Name              : root
Domain0 Boot HART         : 1
Domain0 HARTs             : 0*,1*
Domain0 Region00          : 0x0000000002000000-0x000000000200ffff (I)
Domain0 Region01          : 0x0000000080000000-0x000000008007ffff ()
Domain0 Region02          : 0x0000000000000000-0xffffffffffffffff (R,W,X)
Domain0 Next Address      : 0x0000000080200000
Domain0 Next Arg1         : 0x0000000082200000
Domain0 Next Mode         : S-mode
Domain0 SysReset          : yes

Boot HART ID              : 1
Boot HART Domain          : root
Boot HART ISA             : rv64imafdcsux
Boot HART Features        : scounteren,mcounteren
Boot HART PMP Count       : 16
Boot HART PMP Granularity : 4096
Boot HART PMP Address Bits: 36
Boot HART MHPM Count      : 2
Boot HART MIDELEG         : 0x0000000000000222
Boot HART MEDELEG         : 0x000000000000b109


U-Boot 2022.04-rc2-VisionFive (Mar 07 2022 - 21:12:22 +0800)StarFive

CPU:   rv64imafdc
Model: StarFive VisionFive V1
DRAM:  8 GiB
Core:  13 devices, 9 uclasses, devicetree: separate
MMC:   mmc@10000000: 0, mmc@10010000: 1
Loading Environment from SPIFlash... cadence_spi spi@11860000: Can't get reset: -524
SF: Detected gd25lq128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
*** Warning - bad CRC, using default environment

StarFive EEPROM format v1

--------EEPROM INFO--------
Vendor : StarFive Technology Co., Ltd.
[...REDACTED, PERSONALLY IDENTIFIABLE...]
--------EEPROM INFO--------

In:    serial@12440000
Out:   serial@12440000
Err:   serial@12440000
Net:   dwmac.10020000
MMC CD is 0x0, force to True.
MMC CD is 0x0, force to True.
switch to partitions #0, OK
mmc0 is current device
MMC CD is 0x0, force to True.
MMC CD is 0x0, force to True.
** Invalid partition 1 **
Couldn't find partition mmc 0
Can't set block device
380 bytes read in 20 ms (18.6 KiB/s)
Importing environment from mmc0 ...
Autoboot in 2 seconds
MMC CD is 0x0, force to True.
MMC CD is 0x0, force to True.
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:2...
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
MMC CD is 0x1, force to True.
Card did not respond to voltage select! : -110
Disk mmc@10010000.blk not ready
EFI boot manager: Cannot load any image
Scanning mmc 0:3...
Found /boot/extlinux/extlinux.conf
Invalid pxefile address: /boot/extlinux/extlinux.conf
SCRIPT FAILED: continuing...
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
EFI boot manager: Cannot load any image
Speed: 1000, full duplex
BOOTP broadcast 1
DHCP client bound to address 192.168.1.87 (105 ms)
*** ERROR: `serverip' not set
Cannot autoload with TFTPGET
Speed: 1000, full duplex
BOOTP broadcast 1
DHCP client bound to address 192.168.1.87 (103 ms)
*** ERROR: `serverip' not set
Cannot autoload with TFTPGET