API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Sep 19th, 2017
128
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.22 KB | None | 0 0
raw download clone embed print report
  1. [00]
  2.  
  3. U-Boot 1.1.4 (Jun 7 2016 - 15:56:08)
  4.  
  5. ap152 - Dragonfly 1.0
  6.  
  7. DRAM: 64 MB
  8. Top of RAM usable for U-Boot at: 84000000
  9. Reserving 363k for U-Boot at: 83fa4000
  10. Reserving 192k for malloc() at: 83f74000
  11. Reserving 44 Bytes for Board Info at: 83f73fd4
  12. Reserving 36 Bytes for Global Data at: 83f73fb0
  13. Reserving 128k for boot params() at: 83f53fb0
  14. Stack Pointer at: 83f53f98
  15. Now running in RAM - U-Boot at: 83fa4000
  16. Flash Manuf Id 0xef, DeviceId0 0x40, DeviceId1 0x18
  17. flash size 16MB, sector count = 256
  18. Flash: 16 MB
  19. Using default environment
  20.  
  21. In: serial
  22. Out: serial
  23. Err: serial
  24. Net: ath_gmac_enet_initialize...
  25. No valid address in Flash. Using fixed address
  26. ath_gmac_enet_initialize: reset mask:c02200
  27. athr_mgmt_init ::done
  28. Dragonfly ----> S17 PHY *
  29. athrs17_reg_init: complete
  30. SGMII in forced mode
  31. athr_gmac_sgmii_setup SGMII done
  32. : cfg1 0x80000000 cfg2 0x7114
  33. eth0: 00:03:7f:09:0b:ad
  34. eth0 up
  35. eth0
  36. Setting 0x181162c0 to 0x20402100
  37. is_auto_upload_firmware=0
  38. Autobooting in 1 seconds
  39. ## Booting image at 9f020000 ...
  40. Uncompressing Kernel Image ... OK
  41. No initrd
  42. ## Transferring control to Linux (at address 80060000) ...
  43. ## Giving linux memsize in bytes, 67108864
  44.  
  45. Starting kernel ...
  46.  
  47. [ 0.000000] Linux version 3.18.20 (buildbot@builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 21:55:57 CEST 2015
  48. [ 0.000000] bootconsole [early0] enabled
  49. [ 0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
  50. [ 0.000000] SoC: Qualcomm Atheros QCA9561 ver 1 rev 0
  51. [ 0.000000] Determined physical RAM map:
  52. [ 0.000000] memory: 04000000 @ 00000000 (usable)
  53. [ 0.000000] Initrd not found or empty - disabling initrd
  54. [ 0.000000] Zone ranges:
  55. [ 0.000000] Normal [mem 0x00000000-0x03ffffff]
  56. [ 0.000000] Movable zone start for each node
  57. [ 0.000000] Early memory node ranges
  58. [ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
  59. [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff]
  60. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  61. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  62. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
  63. [ 0.000000] Kernel command line: board=TL-WR1043ND-v2 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
  64. [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  65. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  66. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  67. [ 0.000000] Writing ErrCtl register=00000000
  68. [ 0.000000] Readback ErrCtl register=00000000
  69. [ 0.000000] Memory: 61004K/65536K available (2621K kernel code, 129K rwdata, 344K rodata, 224K init, 194K bss, 4532K reserved)
  70. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  71. [ 0.000000] NR_IRQS:51
  72. [ 0.000000] Clocks: CPU:800.000MHz, DDR:650.000MHz, AHB:266.666MHz, Ref:25.000MHz
  73. [ 0.000000] Calibrating delay loop... 398.13 BogoMIPS (lpj=1990656)
  74. [ 0.060000] pid_max: default: 32768 minimum: 301
  75. [ 0.060000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  76. [ 0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  77. [ 0.070000] NET: Registered protocol family 16
  78. [ 0.080000] MIPS: machine is TP-LINK TL-WR1043ND v2
  79. [ 0.520000] Switched to clocksource MIPS
  80. [ 0.530000] NET: Registered protocol family 2
  81. [ 0.530000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  82. [ 0.530000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  83. [ 0.540000] TCP: Hash tables configured (established 1024 bind 1024)
  84. [ 0.540000] TCP: reno registered
  85. [ 0.550000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  86. [ 0.550000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  87. [ 0.560000] NET: Registered protocol family 1
  88. [ 0.560000] futex hash table entries: 256 (order: -1, 3072 bytes)
  89. [ 0.570000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  90. [ 0.580000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  91. [ 0.590000] msgmni has been set to 119
  92. [ 0.590000] io scheduler noop registered
  93. [ 0.590000] io scheduler deadline registered (default)
  94. [ 0.600000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  95. [ 0.610000] console [ttyS0] disabled
  96. ú[ 0.630000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a 16550A
  97. [ 0.640000] console [ttyS0] enabled
  98. [ 0.640000] console [ttyS0] enabled
  99. [ 0.650000] bootconsole [early0] disabled
  100. [ 0.650000] bootconsole [early0] disabled
  101. [ 0.650000] m25p80 spi0.0: found w25q128, expected m25p80
  102. [ 0.660000] m25p80 spi0.0: w25q128 (16384 Kbytes)
  103. [ 0.670000] 5 tp-link partitions found on MTD device spi0.0
  104. [ 0.670000] Creating 5 MTD partitions on "spi0.0":
  105. [ 0.680000] 0x000000000000-0x000000020000 : "u-boot"
  106. [ 0.680000] 0x000000020000-0x00000012c508 : "kernel"
  107. [ 0.690000] 0x00000012c508-0x000000ff0000 : "rootfs"
  108. [ 0.690000] mtd: device 2 (rootfs) set to be root filesystem
  109. [ 0.710000] 1 squashfs-split partitions found on MTD device rootfs
  110. [ 0.710000] 0x000000360000-0x000000ff0000 : "rootfs_data"
  111. [ 0.720000] 0x000000ff0000-0x000001000000 : "art"
  112. [ 0.720000] 0x000000020000-0x000000ff0000 : "firmware"
  113. [ 0.740000] libphy: ag71xx_mdio: probed
  114. [ 1.340000] ag71xx ag71xx.0: invalid speed specified
  115. [ 1.340000] ag71xx: probe of ag71xx.0 failed with error -22
  116. [ 1.940000] ag71xx-mdio.1: unknown phy id '0000:0000'
  117. [ 1.940000] TCP: cubic registered
  118. [ 1.950000] NET: Registered protocol family 17
  119. [ 1.950000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  120. [ 1.960000] Bridge firewalling registered
  121. [ 1.970000] 8021q: 802.1Q VLAN Support v1.8
  122. [ 1.980000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  123. [ 1.990000] Freeing unused kernel memory: 224K (80368000 - 803a0000)
  124. [ 2.870000] init: Console is alive
  125. [ 2.870000] init: - watchdog -
  126. [ 3.890000] usbcore: registered new interface driver usbfs
  127. [ 3.900000] usbcore: registered new interface driver hub
  128. [ 3.900000] usbcore: registered new device driver usb
  129. [ 3.910000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  130. [ 3.920000] ehci-platform: EHCI generic platform driver
  131. [ 3.930000] ehci-platform ehci-platform.0: EHCI Host Controller
  132. [ 3.930000] ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1
  133. [ 3.940000] ehci-platform ehci-platform.0: irq 48, io mem 0x1b000000
  134. [ 3.970000] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00
  135. [ 3.970000] hub 1-0:1.0: USB hub found
  136. [ 3.980000] hub 1-0:1.0: 1 port detected
  137. [ 3.980000] ehci-platform ehci-platform.1: EHCI Host Controller
  138. [ 3.990000] ehci-platform ehci-platform.1: new USB bus registered, assigned bus number 2
  139. [ 4.000000] ehci-platform ehci-platform.1: irq 49, io mem 0x1b400000
  140. [ 4.020000] ehci-platform ehci-platform.1: USB 2.0 started, EHCI 1.00
  141. [ 4.020000] hub 2-0:1.0: USB hub found
  142. [ 4.030000] hub 2-0:1.0: 1 port detected
  143. [ 4.890000] init: - preinit -
  144. [ 5.350000] random: procd urandom read with 8 bits of entropy available
  145. Press the [f] key and hit [enter] to enter failsafe mode
  146. Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  147. [ 8.560000] jffs2: notice: (353) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  148. [ 8.580000] mount_root: switching to jffs2 overlay
  149. [ 8.620000] procd: - early -
  150. [ 8.620000] procd: - watchdog -
  151. [ 9.280000] procd: - ubus -
  152. [ 10.290000] procd: - init -
  153. Please press Enter to activate this console.
  154. [ 10.890000] NET: Registered protocol family 10
  155. [ 10.900000] ip6_tables: (C) 2000-2006 Netfilter Core Team
  156. [ 10.910000] Loading modules backported from Linux version master-2015-03-09-0-g141f155
  157. [ 10.920000] Backport generated by backports.git backports-20150129-0-gdd4a670
  158. [ 10.930000] ip_tables: (C) 2000-2006 Netfilter Core Team
  159. [ 10.940000] nf_conntrack version 0.5.0 (956 buckets, 3824 max)
  160. [ 10.970000] xt_time: kernel timezone is -0000
  161. [ 10.990000] cfg80211: Calling CRDA to update world regulatory domain
  162. [ 11.020000] cfg80211: World regulatory domain updated:
  163. [ 11.020000] cfg80211: DFS Master region: unset
  164. [ 11.030000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  165. [ 11.040000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  166. [ 11.040000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  167. [ 11.050000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  168. [ 11.060000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  169. [ 11.070000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
  170. [ 11.080000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  171. [ 11.090000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  172. [ 11.090000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  173. [ 11.120000] PPP generic driver version 2.4.2
  174. [ 11.130000] NET: Registered protocol family 24
  175. [ 11.190000] ieee80211 phy0: Atheros AR???? Rev:0 mem=0xb8100000, irq=47
  176. [ 11.220000] cfg80211: Calling CRDA for country: US
  177. [ 11.220000] cfg80211: Regulatory domain changed to country: US
  178. [ 11.230000] cfg80211: DFS Master region: FCC
  179. [ 11.230000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  180. [ 11.240000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
  181. [ 11.250000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
  182. [ 11.260000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
  183. [ 11.270000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
  184. [ 11.280000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!