API tools faq
paste
Guest User

Untitled

a guest
Jan 23rd, 2018
175
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 35.14 KB | None | 0 0
raw download clone embed print report
  1. root@linaro-developer:~# dmesg
  2. [ 0.000000] Booting Linux on physical CPU 0x0
  3. [ 0.000000] Linux version 4.14.0-rc7-linaro-hikey960 (buildslave@x86-64-10) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11)) #1 SMP PREEMPT Thu Jan 11 00:27:15 UTC 2018
  4. [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
  5. [ 0.000000] Machine model: HiKey960
  6. [ 0.000000] efi: Getting EFI parameters from FDT:
  7. [ 0.000000] efi: EFI v2.60 by EDK II
  8. [ 0.000000] efi: MEMATTR=0xbe769518
  9. [ 0.000000] cma: Reserved 16 MiB at 0x00000000bd000000
  10. [ 0.000000] NUMA: No NUMA configuration found
  11. [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000bfffffff]
  12. [ 0.000000] NUMA: NODE_DATA [mem 0xbffa8f00-0xbffaa9ff]
  13. [ 0.000000] Zone ranges:
  14. [ 0.000000] DMA [mem 0x0000000000000000-0x00000000bfffffff]
  15. [ 0.000000] Normal empty
  16. [ 0.000000] Movable zone start for each node
  17. [ 0.000000] Early memory node ranges
  18. [ 0.000000] node 0: [mem 0x0000000000000000-0x000000001abfffff]
  19. [ 0.000000] node 0: [mem 0x000000001ad88000-0x0000000031ffffff]
  20. [ 0.000000] node 0: [mem 0x0000000032101000-0x000000003dffffff]
  21. [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000089b7ffff]
  22. [ 0.000000] node 0: [mem 0x0000000089cc0000-0x00000000ba49ffff]
  23. [ 0.000000] node 0: [mem 0x00000000ba4a0000-0x00000000ba6dffff]
  24. [ 0.000000] node 0: [mem 0x00000000ba6e0000-0x00000000ba6e1fff]
  25. [ 0.000000] node 0: [mem 0x00000000ba6e2000-0x00000000ba6e5fff]
  26. [ 0.000000] node 0: [mem 0x00000000ba6e6000-0x00000000bf6affff]
  27. [ 0.000000] node 0: [mem 0x00000000bf6b0000-0x00000000bf6effff]
  28. [ 0.000000] node 0: [mem 0x00000000bf6f0000-0x00000000bf6fffff]
  29. [ 0.000000] node 0: [mem 0x00000000bf700000-0x00000000bf74ffff]
  30. [ 0.000000] node 0: [mem 0x00000000bf750000-0x00000000bfffffff]
  31. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000bfffffff]
  32. [ 0.000000] On node 0 totalpages: 777271
  33. [ 0.000000] DMA zone: 12288 pages used for memmap
  34. [ 0.000000] DMA zone: 0 pages reserved
  35. [ 0.000000] DMA zone: 777271 pages, LIFO batch:31
  36. [ 0.000000] psci: probing for conduit method from DT.
  37. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  38. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  39. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  40. [ 0.000000] random: fast init done
  41. [ 0.000000] percpu: Embedded 23 pages/cpu @ffff8000bfeed000 s55448 r8192 d30568 u94208
  42. [ 0.000000] pcpu-alloc: s55448 r8192 d30568 u94208 alloc=23*4096
  43. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
  44. [ 0.000000] Detected VIPT I-cache on CPU0
  45. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  46. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 764983
  47. [ 0.000000] Policy zone: DMA
  48. [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/Image console=tty0 console=ttyAMA6,115200n8 root=/dev/sdd10 rootwait rw quiet efi=noruntime
  49. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  50. [ 0.000000] Memory: 3019664K/3109084K available (10236K kernel code, 1180K rwdata, 4732K rodata, 1152K init, 405K bss, 73036K reserved, 16384K cma-reserved)
  51. [ 0.000000] Virtual kernel memory layout:
  52. [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
  53. [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
  54. [ 0.000000] .text : 0xffff000008080000 - 0xffff000008a80000 ( 10240 KB)
  55. [ 0.000000] .rodata : 0xffff000008a80000 - 0xffff000008f30000 ( 4800 KB)
  56. [ 0.000000] .init : 0xffff000008f30000 - 0xffff000009050000 ( 1152 KB)
  57. [ 0.000000] .data : 0xffff000009050000 - 0xffff000009177200 ( 1181 KB)
  58. [ 0.000000] .bss : 0xffff000009177200 - 0xffff0000091dc960 ( 406 KB)
  59. [ 0.000000] fixed : 0xffff7dfffe7fd000 - 0xffff7dfffec00000 ( 4108 KB)
  60. [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
  61. [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
  62. [ 0.000000] 0xffff7e0000000000 - 0xffff7e0003000000 ( 48 MB actual)
  63. [ 0.000000] memory : 0xffff800000000000 - 0xffff8000c0000000 ( 3072 MB)
  64. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  65. [ 0.000000] Preemptible hierarchical RCU implementation.
  66. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
  67. [ 0.000000] Tasks RCU enabled.
  68. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
  69. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  70. [ 0.000000] GIC: Using split EOI/Deactivate mode
  71. [ 0.000000] arch_timer: cp15 timer(s) running at 1.92MHz (phys).
  72. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1c570327e, max_idle_ns: 1763180809505 ns
  73. [ 0.000005] sched_clock: 56 bits at 1920kHz, resolution 520ns, wraps every 4398046510977ns
  74. [ 0.000094] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58334160866034 ns
  75. [ 0.000591] Console: colour dummy device 80x25
  76. [ 0.000614] console [tty0] enabled
  77. [ 0.000694] Calibrating delay loop (skipped), value calculated using timer frequency.. 3.84 BogoMIPS (lpj=7680)
  78. [ 0.000701] pid_max: default: 32768 minimum: 301
  79. [ 0.000770] Security Framework initialized
  80. [ 0.001989] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  81. [ 0.002572] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  82. [ 0.002603] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
  83. [ 0.002623] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
  84. [ 0.016039] ASID allocator initialised with 65536 entries
  85. [ 0.024013] Hierarchical SRCU implementation.
  86. [ 0.033183] EFI runtime services will be disabled.
  87. [ 0.040045] smp: Bringing up secondary CPUs ...
  88. [ 0.068377] Detected VIPT I-cache on CPU1
  89. [ 0.068466] CPU1: Booted secondary processor [410fd034]
  90. [ 0.096348] Detected VIPT I-cache on CPU2
  91. [ 0.096375] CPU2: Booted secondary processor [410fd034]
  92. [ 0.124367] Detected VIPT I-cache on CPU3
  93. [ 0.124384] CPU3: Booted secondary processor [410fd034]
  94. [ 0.153939] CPU features: enabling workaround for ARM erratum 858921
  95. [ 0.153944] Detected VIPT I-cache on CPU4
  96. [ 0.153952] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU4: 0x00000000101122
  97. [ 0.153958] CPU features: Unsupported CPU feature variation detected.
  98. [ 0.154096] arch_timer: Enabling local workaround for ARM erratum 858921
  99. [ 0.154104] arch_timer: CPU4: Trapping CNTVCT access
  100. [ 0.154108] CPU4: Booted secondary processor [410fd091]
  101. [ 0.180386] Detected VIPT I-cache on CPU5
  102. [ 0.180391] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU5: 0x00000000101122
  103. [ 0.180400] arch_timer: Enabling local workaround for ARM erratum 858921
  104. [ 0.180405] arch_timer: CPU5: Trapping CNTVCT access
  105. [ 0.180408] CPU5: Booted secondary processor [410fd091]
  106. [ 0.208410] Detected VIPT I-cache on CPU6
  107. [ 0.208415] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU6: 0x00000000101122
  108. [ 0.208424] arch_timer: Enabling local workaround for ARM erratum 858921
  109. [ 0.208429] arch_timer: CPU6: Trapping CNTVCT access
  110. [ 0.208431] CPU6: Booted secondary processor [410fd091]
  111. [ 0.236438] Detected VIPT I-cache on CPU7
  112. [ 0.236442] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU7: 0x00000000101122
  113. [ 0.236452] arch_timer: Enabling local workaround for ARM erratum 858921
  114. [ 0.236456] arch_timer: CPU7: Trapping CNTVCT access
  115. [ 0.236459] CPU7: Booted secondary processor [410fd091]
  116. [ 0.236508] smp: Brought up 1 node, 8 CPUs
  117. [ 0.236514] SMP: Total of 8 processors activated.
  118. [ 0.236518] CPU features: detected feature: 32-bit EL0 Support
  119. [ 0.236696] CPU: All CPU(s) started at EL2
  120. [ 0.236723] alternatives: patching kernel code
  121. [ 0.237482] devtmpfs: initialized
  122. [ 0.242508] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  123. [ 0.242563] futex hash table entries: 2048 (order: 6, 262144 bytes)
  124. [ 0.243065] pinctrl core: initialized pinctrl subsystem
  125. [ 0.244303] DMI not present or invalid.
  126. [ 0.244596] NET: Registered protocol family 16
  127. [ 0.246018] cpuidle: using governor menu
  128. [ 0.246719] vdso: 2 pages (1 code @ ffff000008a86000, 1 data @ ffff000009055000)
  129. [ 0.246729] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  130. [ 0.248983] DMA: preallocated 256 KiB pool for atomic allocations
  131. [ 0.249257] Serial: AMBA PL011 UART driver
  132. [ 0.269291] hi3660-mbox e896b000.mailbox: Mailbox enabled
  133. [ 0.278811] uart-pl011 ffd74000.serial: could not find pctldev for node /soc/pinmux@e896c000/uart3_pmx_func, deferring probe
  134. [ 0.278936] uart-pl011 fdf01000.serial: could not find pctldev for node /soc/pinmux@e896c000/uart4_pmx_func, deferring probe
  135. [ 0.279041] uart-pl011 fff32000.serial: could not find pctldev for node /soc/pinmux@e896c000/uart6_pmx_func, deferring probe
  136. [ 0.300596] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  137. [ 0.301406] ACPI: Interpreter disabled.
  138. [ 0.302596] vgaarb: loaded
  139. [ 0.302799] SCSI subsystem initialized
  140. [ 0.302928] libata version 3.00 loaded.
  141. [ 0.303027] ssp-pl022 ffd68000.spi: could not find pctldev for node /soc/pinmux@fff11000/spi2_pmx_func, deferring probe
  142. [ 0.303052] ssp-pl022 ff3b3000.spi: could not find pctldev for node /soc/pinmux@ff3b6000/spi3_pmx_func, deferring probe
  143. [ 0.303228] usbcore: registered new interface driver usbfs
  144. [ 0.303256] usbcore: registered new interface driver hub
  145. [ 0.303310] usbcore: registered new device driver usb
  146. [ 0.303460] tcpc_class_init_1.1.1_G
  147. [ 0.303469] TCPC class init OK
  148. [ 0.303476] Init Richtek RegMap
  149. [ 0.303594] i2c_designware ffd71000.i2c: could not find pctldev for node /soc/pinmux@fff11000/i2c0_pmx_func, deferring probe
  150. [ 0.303616] i2c_designware ffd72000.i2c: could not find pctldev for node /soc/pinmux@fff11000/i2c1_pmx_func, deferring probe
  151. [ 0.303636] i2c_designware fdf0b000.i2c: could not find pctldev for node /soc/pinmux@fff11000/i2c7_pmx_func, deferring probe
  152. [ 0.303982] pps_core: LinuxPPS API ver. 1 registered
  153. [ 0.303984] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  154. [ 0.303994] PTP clock support registered
  155. [ 0.304080] EDAC MC: Ver: 3.0.0
  156. [ 0.304258] dmi: Firmware registration failed.
  157. [ 0.304429] Registered efivars operations
  158. [ 0.304717] Advanced Linux Sound Architecture Driver Initialized.
  159. [ 0.305313] clocksource: Switched to clocksource arch_sys_counter
  160. [ 0.305453] VFS: Disk quotas dquot_6.6.0
  161. [ 0.305495] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  162. [ 0.305607] pnp: PnP ACPI: disabled
  163. [ 0.309533] NET: Registered protocol family 2
  164. [ 0.310003] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  165. [ 0.310189] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
  166. [ 0.310570] TCP: Hash tables configured (established 32768 bind 32768)
  167. [ 0.310679] UDP hash table entries: 2048 (order: 4, 65536 bytes)
  168. [ 0.310744] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
  169. [ 0.310921] NET: Registered protocol family 1
  170. [ 0.311178] RPC: Registered named UNIX socket transport module.
  171. [ 0.311180] RPC: Registered udp transport module.
  172. [ 0.311182] RPC: Registered tcp transport module.
  173. [ 0.311184] RPC: Registered tcp NFSv4.1 backchannel transport module.
  174. [ 0.311192] PCI: CLS 0 bytes, default 128
  175. [ 0.312139] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  176. [ 0.312390] kvm [1]: 8-bit VMID
  177. [ 0.312393] kvm [1]: IDMAP page: a71000
  178. [ 0.312394] kvm [1]: HYP VA range: 800000000000:ffffffffffff
  179. [ 0.313033] kvm [1]: Hyp mode initialized successfully
  180. [ 0.313218] kvm [1]: vgic-v2@e82b4000
  181. [ 0.313641] kvm [1]: vgic interrupt IRQ1
  182. [ 0.313652] kvm [1]: virtual timer IRQ4
  183. [ 0.315654] audit: initializing netlink subsys (disabled)
  184. [ 0.315734] audit: type=2000 audit(0.311:1): state=initialized audit_enabled=0 res=1
  185. [ 0.315973] workingset: timestamp_bits=44 max_order=20 bucket_order=0
  186. [ 0.319582] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  187. [ 0.319959] NFS: Registering the id_resolver key type
  188. [ 0.319982] Key type id_resolver registered
  189. [ 0.319984] Key type id_legacy registered
  190. [ 0.319991] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  191. [ 0.320140] 9p: Installing v9fs 9p2000 file system support
  192. [ 0.321884] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  193. [ 0.321890] io scheduler noop registered
  194. [ 0.321993] io scheduler cfq registered (default)
  195. [ 0.321996] io scheduler mq-deadline registered
  196. [ 0.321997] io scheduler kyber registered
  197. [ 0.324092] pinctrl-single e896c000.pinmux: 124 pins at pa ffff0000099e5000 size 496
  198. [ 0.324393] pinctrl-single ff37e000.pinmux: 6 pins at pa ffff0000099ed000 size 24
  199. [ 0.324522] pinctrl-single ff3b6000.pinmux: 12 pins at pa ffff0000099f5000 size 48
  200. [ 0.324603] pinctrl-single ff3fd000.pinmux: 6 pins at pa ffff0000099fd000 size 24
  201. [ 0.324740] pinctrl-single fff11000.pinmux: 42 pins at pa ffff000009a05000 size 168
  202. [ 0.324927] pinctrl-single e896c800.pinmux: 128 pins at pa ffff000009a0d800 size 512
  203. [ 0.325015] pinctrl-single ff3b6800.pinmux: 6 pins at pa ffff000009a15800 size 24
  204. [ 0.325118] pinctrl-single ff3fd800.pinmux: 6 pins at pa ffff000009a1d800 size 24
  205. [ 0.325197] pinctrl-single ff37e800.pinmux: 6 pins at pa ffff000009a25800 size 24
  206. [ 0.325335] pinctrl-single fff11800.pinmux: 47 pins at pa ffff000009a2d800 size 188
  207. [ 0.326771] pl061_gpio e8a0b000.gpio: PL061 GPIO chip @0x00000000e8a0b000 registered
  208. [ 0.327002] pl061_gpio e8a0c000.gpio: PL061 GPIO chip @0x00000000e8a0c000 registered
  209. [ 0.327140] pl061_gpio e8a0d000.gpio: PL061 GPIO chip @0x00000000e8a0d000 registered
  210. [ 0.327271] pl061_gpio e8a0e000.gpio: PL061 GPIO chip @0x00000000e8a0e000 registered
  211. [ 0.327400] pl061_gpio e8a0f000.gpio: PL061 GPIO chip @0x00000000e8a0f000 registered
  212. [ 0.327522] pl061_gpio e8a10000.gpio: PL061 GPIO chip @0x00000000e8a10000 registered
  213. [ 0.327644] pl061_gpio e8a11000.gpio: PL061 GPIO chip @0x00000000e8a11000 registered
  214. [ 0.327761] pl061_gpio e8a12000.gpio: PL061 GPIO chip @0x00000000e8a12000 registered
  215. [ 0.327888] pl061_gpio e8a13000.gpio: PL061 GPIO chip @0x00000000e8a13000 registered
  216. [ 0.328008] pl061_gpio e8a14000.gpio: PL061 GPIO chip @0x00000000e8a14000 registered
  217. [ 0.328129] pl061_gpio e8a15000.gpio: PL061 GPIO chip @0x00000000e8a15000 registered
  218. [ 0.328250] pl061_gpio e8a16000.gpio: PL061 GPIO chip @0x00000000e8a16000 registered
  219. [ 0.328391] pl061_gpio e8a17000.gpio: PL061 GPIO chip @0x00000000e8a17000 registered
  220. [ 0.328520] pl061_gpio e8a18000.gpio: PL061 GPIO chip @0x00000000e8a18000 registered
  221. [ 0.328668] pl061_gpio e8a19000.gpio: PL061 GPIO chip @0x00000000e8a19000 registered
  222. [ 0.328797] pl061_gpio e8a1a000.gpio: PL061 GPIO chip @0x00000000e8a1a000 registered
  223. [ 0.328923] pl061_gpio e8a1b000.gpio: PL061 GPIO chip @0x00000000e8a1b000 registered
  224. [ 0.329049] pl061_gpio e8a1c000.gpio: PL061 GPIO chip @0x00000000e8a1c000 registered
  225. [ 0.329239] pl061_gpio ff3b4000.gpio: PL061 GPIO chip @0x00000000ff3b4000 registered
  226. [ 0.329811] pl061_gpio ff3b5000.gpio: PL061 GPIO chip @0x00000000ff3b5000 registered
  227. [ 0.330025] pl061_gpio e8a1f000.gpio: PL061 GPIO chip @0x00000000e8a1f000 registered
  228. [ 0.330170] pl061_gpio e8a20000.gpio: PL061 GPIO chip @0x00000000e8a20000 registered
  229. [ 0.330305] pl061_gpio fff0b000.gpio: PL061 GPIO chip @0x00000000fff0b000 registered
  230. [ 0.330444] pl061_gpio fff0c000.gpio: PL061 GPIO chip @0x00000000fff0c000 registered
  231. [ 0.330572] pl061_gpio fff0d000.gpio: PL061 GPIO chip @0x00000000fff0d000 registered
  232. [ 0.330711] pl061_gpio fff0e000.gpio: PL061 GPIO chip @0x00000000fff0e000 registered
  233. [ 0.330835] pl061_gpio fff0f000.gpio: PL061 GPIO chip @0x00000000fff0f000 registered
  234. [ 0.330973] pl061_gpio fff10000.gpio: PL061 GPIO chip @0x00000000fff10000 registered
  235. [ 0.331092] pl061_gpio fff1d000.gpio: PL061 GPIO chip @0x00000000fff1d000 registered
  236. [ 0.335590] k3-dma fdf30000.dma: initialized
  237. [ 0.339444] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  238. [ 0.340955] SuperH (H)SCI(F) driver initialized
  239. [ 0.341189] msm_serial: driver initialized
  240. [ 0.342258] [drm] +.
  241. [ 0.342274] [drm] wait for external HDMI bridge driver.
  242. [ 0.347322] loop: module loaded
  243. [ 0.347698] [I/GPIO_HUB] gpio_hub_probe: step in
  244. [ 0.347902] [I/GPIO_HUB] gpio_hub_init:gpio hub init status:0
  245. [ 0.350347] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
  246. [ 0.350356] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vcc-supply regulator, assuming enabled
  247. [ 0.350359] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
  248. [ 0.350363] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
  249. [ 0.372323] scsi host0: ufshcd
  250. [ 0.383529] libphy: Fixed MDIO Bus: probed
  251. [ 0.383741] tun: Universal TUN/TAP device driver, 1.6
  252. [ 0.384482] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  253. [ 0.384484] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  254. [ 0.384511] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
  255. [ 0.384514] igb: Copyright (c) 2007-2014 Intel Corporation.
  256. [ 0.384542] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
  257. [ 0.384544] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  258. [ 0.384724] sky2: driver version 1.30
  259. [ 0.385025] VFIO - User Level meta-driver version: 0.3
  260. [ 0.385565] [USB3][hisi_dwc3_probe]+
  261. [ 0.385990] [USB3][get_phy_param]eye diagram param: 0x1c466e3
  262. [ 0.385999] [USB3][get_phy_param]eye diagram host param: 0x1c466e3
  263. [ 0.386007] [USB3][get_phy_param]usb3_phy_cr_param: 0xb80
  264. [ 0.386013] [USB3][get_phy_param]usb3_phy_host_cr_param: 0x980
  265. [ 0.386021] [USB3][get_phy_param]usb3_phy_tx_vboost_lvl: 5
  266. [ 0.386051] [USB3][get_resource]this is asic platform (fpga flag 0)
  267. [ 0.386058] [USB3][create_attr_file]+
  268. [ 0.386117] [USB3][create_attr_file]-
  269. [ 0.386127] [USB3][hi3660_usb3phy_init]+
  270. [ 0.413435] [USB3][config_femtophy_param]set hs phy param 0x1c466e3 for device
  271. [ 0.413883] [USB3][config_femtophy_param]set ss phy rx equalization 0xb80
  272. [ 0.414763] [USB3][config_femtophy_param]set ss RX_SCOPE_VDCC 0x1
  273. [ 0.414771] [USB3][config_femtophy_param]set ss phy tx vboost lvl 0x5
  274. [ 0.414780] [USB3][set_hisi_dwc3_power_flag]set hisi_dwc3_power_flag 1
  275. [ 0.414786] [USB3][hi3660_usb3phy_init]-
  276. [ 0.416104] [dwc3_otg_init]+
  277. [ 0.416111] DWC3_OCFG: 0x0
  278. [ 0.416113] DWC3_OCTL: 0x40
  279. [ 0.416114] DWC3_OEVT: 0x80000000
  280. [ 0.416116] DWC3_OEVTEN: 0x0
  281. [ 0.416118] DWC3_OSTS: 0x19
  282. [ 0.416119] DWC3_BCFG: 0x0
  283. [ 0.416121] DWC3_BCEVT: 0x0
  284. [ 0.416122] DWC3_BCEVTEN: 0x0
  285. [ 0.416124] [dwc3_otg_init]-
  286. [ 0.416156] dwc3 ff100000.dwc3: dwc3_host_init if otg, otg will do device_add.
  287. [ 0.418051] [USB3][hisi_dwc3_wake_lock]usb otg wake lock
  288. [ 0.418070] [USB3][hisi_dwc3_probe]init state: OFF
  289. [ 0.418077] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:1
  290. [ 0.418083] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:1
  291. [ 0.418091] [USB3][hisi_usb_otg_event]event: 1
  292. [ 0.418105] [USB3][hisi_dwc3_probe]-
  293. [ 0.418109] [USB3][event_work]+
  294. [ 0.418111] [USB3][handle_event][handle_event] type: 1
  295. [ 0.418115] [dwc3_otg_work]+
  296. evt = 4
  297. [ 0.418118] [dwc3_otg_stop_peripheral]+
  298. [ 0.418120] [dwc3_otg_stop_peripheral]-
  299. [ 0.418121] [dwc3_suspend_device] +
  300. [ 0.418150] [dwc3_suspend_device] -
  301. [ 0.418152] [dwc3_otg_work]-
  302. [ 0.418153] [USB3][hisi_dwc3_wake_unlock]usb otg wake unlock
  303. [ 0.418164] [USB3][handle_event]hisi usb status: DEVICE -> OFF
  304. [ 0.418170] [USB3][event_work]-
  305. [ 0.418778] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  306. [ 0.418780] ehci-pci: EHCI PCI platform driver
  307. [ 0.418803] ehci-platform: EHCI generic platform driver
  308. [ 0.418878] ehci-orion: EHCI orion driver
  309. [ 0.418931] ehci-exynos: EHCI EXYNOS driver
  310. [ 0.418983] ehci-msm: Qualcomm On-Chip EHCI Host Controller
  311. [ 0.419031] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  312. [ 0.419045] ohci-pci: OHCI PCI platform driver
  313. [ 0.419070] ohci-platform: OHCI generic platform driver
  314. [ 0.419129] ohci-exynos: OHCI EXYNOS driver
  315. [ 0.419437] usbcore: registered new interface driver usb-storage
  316. [ 0.420173] [I/hisi_pd] pd_dpm_init
  317. [ 0.420261] [I/hisi_pd] pd_dpm_probe : +++++++++
  318. [ 0.420301] [I/hisi_pd] pd_dpm_probe ++++
  319.  
  320. [ 0.420452] rt1711h_init (1.1.8_G): initializing...
  321. [ 0.420473] rt1711h node found...
  322. [ 0.421288] rtc-pl031 fff04000.rtc: rtc core: registered pl031 as rtc0
  323. [ 0.421743] i2c /dev entries driver
  324. [ 0.423410] hi3660_thermal fff30000.tsensor: failed to register thermal sensor0: -19
  325. [ 0.423447] hi3660_thermal fff30000.tsensor: failed to register thermal sensor1: -19
  326. [ 0.423464] hi3660_thermal fff30000.tsensor: failed to register thermal sensor2: -19
  327. [ 0.423480] hi3660_thermal fff30000.tsensor: failed to register thermal sensor3: -19
  328. [ 0.423523] hi3660_thermal fff30000.tsensor: failed to register thermal sensor5: -19
  329. [ 0.423534] hi3660_thermal fff30000.tsensor: Thermal Sensor Loaded
  330. [ 0.426025] sdhci: Secure Digital Host Controller Interface driver
  331. [ 0.426031] sdhci: Copyright(c) Pierre Ossman
  332. [ 0.426142] Synopsys Designware Multimedia Card Interface Driver
  333. [ 0.426682] dwmmc_k3 ff37f000.dwmmc1: 'num-slots' was deprecated.
  334. [ 0.426686] dwmmc_k3 ff37f000.dwmmc1: fifo-depth property not found, using value of FIFOTH register as default
  335. [ 0.428934] dwmmc_k3 ff37f000.dwmmc1: IDMAC supports 64-bit address mode.
  336. [ 0.429377] dwmmc_k3 ff37f000.dwmmc1: Using internal DMA controller.
  337. [ 0.429386] dwmmc_k3 ff37f000.dwmmc1: Version ID is 270a
  338. [ 0.429457] dwmmc_k3 ff37f000.dwmmc1: DW MMC controller at irq 57,32 bit host data width,256 deep fifo
  339. [ 0.429802] dwmmc_k3 ff37f000.dwmmc1: Got CD GPIO
  340. [ 0.432794] ufshcd-hi3660 ff3b0000.ufs: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
  341. [ 0.451729] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  342. [ 0.472637] dwmmc_k3 ff3ff000.dwmmc2: 'num-slots' was deprecated.
  343. [ 0.472651] dwmmc_k3 ff3ff000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
  344. [ 0.474867] dwmmc_k3 ff3ff000.dwmmc2: IDMAC supports 64-bit address mode.
  345. [ 0.475718] dwmmc_k3 ff3ff000.dwmmc2: Using internal DMA controller.
  346. [ 0.475738] dwmmc_k3 ff3ff000.dwmmc2: Version ID is 270a
  347. [ 0.475813] dwmmc_k3 ff3ff000.dwmmc2: DW MMC controller at irq 58,32 bit host data width,256 deep fifo
  348. [ 0.477585] sdhci-pltfm: SDHCI platform and OF driver helper
  349. [ 0.482235] ledtrig-cpu: registered to indicate activity on CPUs
  350. [ 0.483951] usbcore: registered new interface driver usbhid
  351. [ 0.483956] usbhid: USB HID core driver
  352. [ 0.485231] optee: probing for conduit method from DT.
  353. [ 0.485241] optee: api uid mismatch
  354. [ 0.487496] NET: Registered protocol family 17
  355. [ 0.487602] 9pnet: Installing 9P2000 support
  356. [ 0.487677] Key type dns_resolver registered
  357. [ 0.488608] registered taskstats version 1
  358. [ 0.497252] ffd74000.serial: ttyAMA3 at MMIO 0xffd74000 (irq = 21, base_baud = 0) is a PL011 rev2
  359. [ 0.500289] fdf01000.serial: ttyAMA4 at MMIO 0xfdf01000 (irq = 22, base_baud = 0) is a PL011 rev2
  360. [ 0.500403] serial serial0: tty port ttyAMA4 registered
  361. [ 0.500791] fff32000.serial: ttyAMA6 at MMIO 0xfff32000 (irq = 23, base_baud = 0) is a PL011 rev2
  362. [ 0.703361] console [ttyAMA6] enabled
  363. [ 0.704401] ssp-pl022 ffd68000.spi: ARM PL022 driver, device ID: 0x00041022
  364. [ 0.704544] ssp-pl022 ffd68000.spi: mapped registers from 0x00000000ffd68000 to ffff000009d15000
  365. [ 0.713349] ssp-pl022 ffd68000.spi: setup for DMA on RX dma0chan0, TX dma0chan1
  366. [ 0.713920] ssp-pl022 ff3b3000.spi: ARM PL022 driver, device ID: 0x00041022
  367. [ 0.714052] ssp-pl022 ff3b3000.spi: mapped registers from 0x00000000ff3b3000 to ffff000009d1d000
  368. [ 0.714098] ssp-pl022 ff3b3000.spi: setup for DMA on RX dma0chan2, TX dma0chan3
  369. [ 0.741345] ufs final power mode: gear = 3, lane = 1, pwr = 1, rate = 2
  370. [ 0.741356] ufshcd-hi3660 ff3b0000.ufs: set TX_EQUALIZER 3.5db
  371. [ 0.758522] rt1711_i2c_probe
  372. [ 0.758526] I2C functionality : OK...
  373. [ 0.765685] ufshcd-hi3660 ff3b0000.ufs: check TX_EQUALIZER DB value lane0 = 0x1
  374. [ 0.765692] ufshcd-hi3660 ff3b0000.ufs: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pwr[FAST MODE, FAST MODE], rate = 2
  375. [ 0.789871] ufshcd-hi3660 ff3b0000.ufs: ufshcd_find_max_sup_active_icc_level: Regulator capability was not set, actvIccLevel=0
  376. [ 0.819010] scsi 0:0:0:49488: scsi_add_lun: correcting incorrect peripheral device type 0x0 for W-LUN 0x c150hN
  377. [ 0.819017] scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUBG4G1CE-B0B1 1000 PQ: 0 ANSI: 6
  378. [ 0.839325] scsi 0:0:0:49456: scsi_add_lun: correcting incorrect peripheral device type 0x0 for W-LUN 0x c130hN
  379. [ 0.839331] scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUBG4G1CE-B0B1 1000 PQ: 0 ANSI: 6
  380. [ 0.843774] scsi 0:0:0:49476: scsi_add_lun: correcting incorrect peripheral device type 0x0 for W-LUN 0x c144hN
  381. [ 0.843780] scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUBG4G1CE-B0B1 1000 PQ: 0 ANSI: 6
  382. [ 0.869382] rt_parse_dt
  383. [ 0.869422] rt1711h_chipID = 0x2171
  384. [ 0.869426] regmap_device_register: name = rt1711-4e
  385. [ 0.869454] rt_regmap_rt1711-4e: rt register cache data init
  386. [ 0.869460] rt_regmap_rt1711-4e: cache cata init successfully
  387. [ 0.869526] tcpc_device_register register tcpc device (type_c_port0)
  388. [ 0.869589] [I/hisi_pd] tcpc_device_register register_pd_wake_unlock_notifier OK
  389. [ 0.869591] PD Timer number = 37
  390. [ 0.870058] tcpci_timer_init : init OK
  391. [ 0.870324] pd_parse_pdata
  392. [ 0.870352] pd_parse_pdata src pdo data =
  393. [ 0.870354] pd_parse_pdata 0: 0x00019064
  394. [ 0.870358] pd_parse_pdata snk pdo data =
  395. [ 0.870359] pd_parse_pdata 0: 0x000190c8
  396. [ 0.870361] pd_parse_pdata 1: 0x0002d0c8
  397. [ 0.870364] pd_parse_pdata id vdos data =
  398. [ 0.870366] pd_parse_pdata 0: 0xd00029cf
  399. [ 0.870367] pd_parse_pdata 1: 0x00000000
  400. [ 0.870369] pd_parse_pdata 2: 0x00010000
  401. [ 0.870373] dpm_caps: local_dr_power
  402. [ 0.870375] dpm_caps: local_dr_data
  403. [ 0.870380] dpm_caps: local_ext_power
  404. [ 0.870381] dpm_caps: local_usb_comm
  405. [ 0.870383] dpm_caps: local_usb_suspend
  406. [ 0.870384] dpm_caps: local_high_cap
  407. [ 0.870386] dpm_caps: local_give_back
  408. [ 0.870388] dpm_caps: local_no_suspend
  409. [ 0.870390] dpm_caps: local_vconn_supply
  410. [ 0.870391] dpm_caps: attemp_discover_cable_dfp
  411. [ 0.870393] dpm_caps: attemp_enter_dp_mode
  412. [ 0.870394] dpm_caps: attemp_discover_cable
  413. [ 0.870396] dpm_caps: attemp_discover_id
  414. [ 0.870397] dpm_caps: pr_reject_as_source
  415. [ 0.870399] dpm_caps: pr_reject_as_sink
  416. [ 0.870401] dpm_caps: pr_check_gp_source
  417. [ 0.870403] dpm_caps: pr_check_gp_sink
  418. [ 0.870405] dpm_caps: dr_reject_as_dfp
  419. [ 0.870406] dpm_caps: dr_reject_as_ufp
  420. [ 0.870408] dpm_caps: snk_prefer_low_voltage
  421. [ 0.870409] dpm_caps: snk_ignore_mismatch_current
  422. [ 0.870412] dpm_caps = 0xc010c10b
  423. [ 0.870415] [I/hisi_pd] PE:pd_core_init
  424. [ 0.870528] scsi 0:0:0:0: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 1000 PQ: 0 ANSI: 6
  425. [ 0.893524] scsi 0:0:0:1: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 1000 PQ: 0 ANSI: 6
  426. [ 0.915503] scsi 0:0:0:2: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 1000 PQ: 0 ANSI: 6
  427. [ 0.916576] rt1711_init_alert name = type_c_port0
  428. [ 0.916578] rt1711_init_alert gpio # = 291
  429. [ 0.916593] sd 0:0:0:0: [sda] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
  430. [ 0.916598] sd 0:0:0:0: [sda] 16384-byte physical blocks
  431. [ 0.916626] GPIO requested...
  432. [ 0.916701] rt1711_init_alert : IRQ number = 69
  433. [ 0.916702] rt1711_init_alert : irq initialized...
  434. [ 0.917002] sd 0:0:0:0: [sda] Write Protect is off
  435. [ 0.917006] IRQF_NO_THREAD Test
  436. [ 0.917008] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10
  437. [ 0.920378] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
  438. [ 0.920386] scsi 0:0:0:3: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 1000 PQ: 0 ANSI: 6
  439. [ 0.921505] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
  440. [ 0.921515] sd 0:0:0:1: [sdb] 16384-byte physical blocks
  441. [ 0.925322] sd 0:0:0:1: [sdb] Write Protect is off
  442. [ 0.925328] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10
  443. [ 0.939661] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
  444. [ 0.944072] sd 0:0:0:2: [sdc] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB)
  445. [ 0.944079] sd 0:0:0:2: [sdc] 16384-byte physical blocks
  446. [ 0.947938] sd 0:0:0:2: [sdc] Write Protect is off
  447. [ 0.947944] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10
  448. [ 0.962274] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
  449. [ 0.966799] sd 0:0:0:3: [sdd] 7805952 4096-byte logical blocks: (32.0 GB/29.8 GiB)
  450. [ 0.966805] sd 0:0:0:3: [sdd] 16384-byte physical blocks
  451. [ 0.970644] sd 0:0:0:3: [sdd] Write Protect is off
  452. [ 0.970649] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10
  453. [ 0.984981] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
  454. [ 1.015872] sd 0:0:0:0: [sda] Attached SCSI disk
  455. [ 1.034055] sd 0:0:0:1: [sdb] Attached SCSI disk
  456. [ 1.040119] Alternate GPT is invalid, using primary GPT.
  457. [ 1.040146] sdc: sdc1
  458. [ 1.075939] sdd: sdd1 sdd2 sdd3 sdd4 sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 sdd12 sdd13
  459. [ 1.098402] sd 0:0:0:2: [sdc] Attached SCSI disk
  460. [ 1.122551] sd 0:0:0:3: [sdd] Attached SCSI disk
  461. [ 1.289540] [I/hisi_pd] TPC-I:typec_init: DRP
  462. [ 1.516979] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!+++++++++++
  463. [ 1.524428] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!-----------
  464. [ 1.531841] [E/hisi_pd] typec_unattached_power_entry:!!!+++++++++++
  465. [ 1.588080] [E/hisi_pd] tcpci_disable_vbus_control: !!!++++++++
  466. [ 1.594017] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=0,+++
  467. [ 1.599865] [E/hisi_pd] typec_unattached_power_entry:!!!-----------
  468. [ 1.606164] [E/GPIO_HUB] gpio_hub_switch_to_hub: switch to hub
  469. [ 1.612018] [I/GPIO_HUB] gpio_hub_change_typec_power: set typec vbus gpio to 0
  470. [ 1.612037] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:1
  471. [ 1.617796] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:1
  472. [ 1.623904] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:2
  473. [ 1.629662] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:2
  474. [ 1.635769] [USB3][hisi_usb_otg_event]event: 2
  475. [ 1.640232] [I/hisi_pd] TPC-I:** Unattached.SNK
  476. [ 1.640249] [USB3][event_work]+
  477. [ 1.643414] [USB3][handle_event][handle_event] type: 2
  478. [ 1.648561] [USB3][set_vbus_power]set port power 1
  479. [ 1.653419] [dwc3_otg_work]+
  480. evt = 2
  481. [ 1.653423] [dwc3_resume_device] +
  482. [ 1.653857] [dwc3_resume_device] -
  483. [ 1.653859] [dwc3_otg_start_host]+
  484. [ 1.654336] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  485. [ 1.654354] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  486. [ 1.654984] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x00010010
  487. [ 1.657258] xhci-hcd xhci-hcd.0.auto: irq 66, io mem 0xff100000
  488. [ 1.657530] hub 1-0:1.0: USB hub found
  489. [ 1.657541] hub 1-0:1.0: 1 port detected
  490. [ 1.657626] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  491. [ 1.657631] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  492. [ 1.657652] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  493. [ 1.658016] hub 2-0:1.0: USB hub found
  494. [ 1.658023] hub 2-0:1.0: 1 port detected
  495. [ 1.658110] [dwc3_otg_start_host]-
  496. [ 1.658112] [dwc3_otg_work]-
  497. [ 1.658114] [USB3][hisi_dwc3_wake_lock]usb otg wake lock
  498. [ 1.663433] [USB3][handle_event]hisi usb_status: OFF -> HOST
  499. [ 1.669089] [USB3][event_work]-
  500. [ 1.707786] tcpc_device_irq_enable : tcpc irq enable OK!
  501. [ 1.707790] rt1711_i2c_probe probe OK!
  502. [ 1.709502] [drm] +.
  503. [ 1.709527] [drm] wait for external HDMI bridge driver.
  504. [ 1.711014] dwmmc_k3 ff3ff000.dwmmc2: 'num-slots' was deprecated.
  505. [ 1.711021] dwmmc_k3 ff3ff000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
  506. [ 1.713228] dwmmc_k3 ff3ff000.dwmmc2: IDMAC supports 64-bit address mode.
  507. [ 1.713356] dwmmc_k3 ff3ff000.dwmmc2: Using internal DMA controller.
  508. [ 1.713365] dwmmc_k3 ff3ff000.dwmmc2: Version ID is 270a
  509. [ 1.713392] dwmmc_k3 ff3ff000.dwmmc2: DW MMC controller at irq 58,32 bit host data width,128 deep fifo
  510. [ 1.713642] mmc_host mmc1: card is non-removable.
  511. [ 1.815357] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  512. [ 1.839771] [drm] +.
  513. [ 1.839810] [drm] wait for external HDMI bridge driver.
  514. [ 1.841266] input: keys as /devices/platform/keys/input/input0
  515. [ 1.842818] rtc-pl031 fff04000.rtc: setting system clock to 1970-01-01 00:19:51 UTC (1191)
  516. [ 1.847090] dwmmc_k3 ff3ff000.dwmmc2: card claims to support voltages below defined range
  517. [ 1.855755] [drm] +.
  518. [ 1.855793] [drm] wait for external HDMI bridge driver.
  519. [ 1.865173] ALSA device list:
  520. [ 1.865179] No soundcards found.
  521. [ 1.865928] uart-pl011 fff32000.serial: no DMA platform data
  522. [ 1.876126] EXT4-fs (sdd10): couldn't mount as ext3 due to feature incompatibilities
  523. [ 1.885304] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
  524. [ 1.898474] EXT4-fs (sdd10): mounted filesystem with ordered data mode. Opts: (null)
  525. [ 1.898514] VFS: Mounted root (ext4 filesystem) on device 8:58.
  526. [ 1.898787] devtmpfs: mounted
  527. [ 1.899142] Freeing unused kernel memory: 1152K
  528. [ 1.899467] mmc1: new SDIO card at address 0001
  529. [ 1.966513] systemd[1]: System time before build time, advancing clock.
  530. [ 2.009362] usb 1-1: new high-speed USB device number 2 using xhci-hcd
  531. [ 2.131976] systemd-journald[1661]: Received request to flush runtime journal from PID 1
  532. [ 2.169807] hub 1-1:1.0: USB hub found
  533. [ 2.169841] hub 1-1:1.0: 5 ports detected
  534. [ 2.210631] [drm] +.
  535. [ 2.210652] [drm] wait for external HDMI bridge driver.
  536. [ 2.285397] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
  537. [ 2.313919] hub 2-1:1.0: USB hub found
  538. [ 2.314036] hub 2-1:1.0: 5 ports detected
  539. [ 2.315459] [drm] +.
  540. [ 2.315589] [drm] wait for external HDMI bridge driver.
  541. [ 2.497334] usb 1-1.5: new high-speed USB device number 3 using xhci-hcd
  542. [ 2.599241] [drm] +.
  543. [ 2.599263] [drm] wait for external HDMI bridge driver.
  544. [ 216.734384] random: crng init done
  545. root@linaro-developer:~#
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!