Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.1.74-Unraid] (local build)
- Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Toshiba MG10ACA... Enterprise Capacity HDD
- Device Model: TOSHIBA MG10ACA20TE
- Serial Number:
- LU WWN Device Id: 5 000039 c68c8b261
- Firmware Version: 0102
- User Capacity: 20,000,588,955,648 bytes [20.0 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database 7.3/5577
- ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5
- SATA Version is: SATA 3.3, 6.0 Gb/s (current: 3.0 Gb/s)
- Local Time is: Thu Mar 7 07:39:02 2024 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM level is: 128 (minimum power consumption without standby)
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- DSN feature is: Disabled
- ATA Security is: Disabled, NOT FROZEN [SEC1]
- Wt Cache Reorder: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 120) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: (1683) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
- 2 Throughput_Performance P-S--- 100 100 050 - 0
- 3 Spin_Up_Time POS--K 100 100 001 - 9334
- 4 Start_Stop_Count -O--CK 100 100 000 - 778
- 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
- 7 Seek_Error_Rate PO-R-- 100 100 050 - 0
- 8 Seek_Time_Performance P-S--- 100 100 050 - 0
- 9 Power_On_Hours -O--CK 090 090 000 - 4289
- 10 Spin_Retry_Count PO--CK 100 100 030 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 150
- 23 Helium_Condition_Lower PO---K 100 100 075 - 0
- 24 Helium_Condition_Upper PO---K 100 100 075 - 0
- 27 MAMR_Health_Monitor PO---K 100 100 030 - 1114973
- 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
- 192 Power-Off_Retract_Count -O--CK 100 100 000 - 107
- 193 Load_Cycle_Count -O--CK 100 100 000 - 1591
- 194 Temperature_Celsius -O---K 100 100 000 - 27 (Min/Max 14/44)
- 196 Reallocated_Event_Count PO--CK 100 100 010 - 0
- 197 Current_Pending_Sector -O--CK 100 100 000 - 0
- 198 Offline_Uncorrectable ----CK 100 100 000 - 0
- 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 14
- 220 Disk_Shift -O---- 100 100 000 - 917504
- 222 Loaded_Hours -O--CK 098 098 000 - 941
- 226 Load-in_Time -OS--K 100 100 000 - 625
- 240 Head_Flying_Hours P----- 100 100 001 - 0
- 241 Total_LBAs_Written -O--CK 100 100 000 - 92310616368
- 242 Total_LBAs_Read -O--CK 100 100 000 - 27722449400
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 51 Comprehensive SMART error log
- 0x03 GPL R/O 5 Ext. Comprehensive SMART error log
- 0x04 GPL,SL R/O 8 Device Statistics log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x08 GPL R/O 2 Power Conditions log
- 0x09 SL R/W 1 Selective self-test log
- 0x0a GPL R/W 2 Device Statistics Notification
- 0x0c GPL R/O 513 Pending Defects log
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters log
- 0x24 GPL R/O 65520 Current Device Internal Status Data log
- 0x25 GPL R/O 65520 Saved Device Internal Status Data log
- 0x2f GPL R/O 1 Set Sector Configuration
- 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xab GPL VS 1024 Device vendor specific log
- 0xae GPL VS 25 Device vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
- Device Error Count: 12
- CR = Command Register
- FEATR = Features Register
- COUNT = Count (was: Sector Count) Register
- LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
- LH = LBA High (was: Cylinder High) Register ] LBA
- LM = LBA Mid (was: Cylinder Low) Register ] Register
- LL = LBA Low (was: Sector Number) Register ]
- DV = Device (was: Device/Head) Register
- DC = Device Control Register
- ER = Error register
- ST = Status register
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 12 [11] occurred at disk power-on lifetime: 4250 hours (177 days + 2 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 84 -- 43 00 08 00 04 80 5e cc e7 40 00 Error: ICRC, ABRT at LBA = 0x4805ecce7 = 19333565671
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 01 00 00 08 00 04 80 5e cb e8 40 00 04:38:00.726 READ FPDMA QUEUED
- ec 00 00 00 01 00 00 00 00 00 00 00 00 04:38:00.724 IDENTIFY DEVICE
- ec 00 00 00 01 00 00 00 00 00 00 00 00 04:38:00.721 IDENTIFY DEVICE
- ef 00 10 00 03 00 00 00 00 00 00 a0 00 04:38:00.721 SET FEATURES [Enable SATA feature]
- 47 00 00 00 01 00 00 00 00 00 00 a0 00 04:38:00.721 READ LOG DMA EXT
- Error 11 [10] occurred at disk power-on lifetime: 4250 hours (177 days + 2 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 84 -- 43 00 f8 00 04 80 5e cc e7 40 00 Error: ICRC, ABRT at LBA = 0x4805ecce7 = 19333565671
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 01 00 00 f8 00 04 80 5e cb e8 40 00 04:37:59.457 READ FPDMA QUEUED
- ec 00 00 00 01 00 00 00 00 00 00 00 00 04:37:59.455 IDENTIFY DEVICE
- ef 00 10 00 03 00 00 00 00 00 00 a0 00 04:37:59.455 SET FEATURES [Enable SATA feature]
- 47 00 00 00 01 00 00 00 00 00 00 a0 00 04:37:59.455 READ LOG DMA EXT
- 47 00 00 00 01 00 00 00 00 08 30 a0 00 04:37:59.452 READ LOG DMA EXT
- Error 10 [9] occurred at disk power-on lifetime: 4250 hours (177 days + 2 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 84 -- 43 00 30 00 04 80 5e cc e7 40 00 Error: ICRC, ABRT at LBA = 0x4805ecce7 = 19333565671
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 01 00 00 30 00 04 80 5e cb e8 40 00 04:37:58.190 READ FPDMA QUEUED
- e5 00 00 00 00 00 00 00 00 00 00 40 00 04:37:58.190 CHECK POWER MODE
- ef 00 10 00 03 00 00 00 00 00 00 a0 00 04:37:58.189 SET FEATURES [Enable SATA feature]
- 47 00 00 00 01 00 00 00 00 00 00 a0 00 04:37:58.189 READ LOG DMA EXT
- 47 00 00 00 01 00 00 00 00 08 30 a0 00 04:37:58.187 READ LOG DMA EXT
- Error 9 [8] occurred at disk power-on lifetime: 4246 hours (176 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 84 -- 43 00 a0 00 00 80 00 15 8f 40 00 Error: ICRC, ABRT at LBA = 0x8000158f = 2147489167
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 01 00 00 a0 00 00 80 00 14 90 40 00 00:07:16.725 READ FPDMA QUEUED
- 60 01 00 00 98 00 00 80 00 15 90 40 00 00:07:16.724 READ FPDMA QUEUED
- ef 00 10 00 03 00 00 00 00 00 00 a0 00 00:07:16.724 SET FEATURES [Enable SATA feature]
- 47 00 00 00 01 00 00 00 00 00 00 a0 00 00:07:16.724 READ LOG DMA EXT
- 47 00 00 00 01 00 00 00 00 08 30 a0 00 00:07:16.722 READ LOG DMA EXT
- Error 8 [7] occurred at disk power-on lifetime: 4246 hours (176 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 84 -- 43 00 00 00 00 80 00 15 8f 40 00 Error: ICRC, ABRT at LBA = 0x8000158f = 2147489167
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 01 00 00 08 00 00 80 00 15 90 40 00 00:07:15.479 READ FPDMA QUEUED
- 60 01 00 00 00 00 00 80 00 14 90 40 00 00:07:15.478 READ FPDMA QUEUED
- b0 00 d0 00 01 00 00 00 c2 4f 00 00 00 00:07:15.477 SMART READ DATA
- 60 01 00 00 78 00 00 80 00 13 90 40 00 00:07:15.470 READ FPDMA QUEUED
- 60 01 00 00 70 00 00 80 00 12 90 40 00 00:07:15.470 READ FPDMA QUEUED
- Error 7 [6] occurred at disk power-on lifetime: 4246 hours (176 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 84 -- 43 00 08 00 00 80 00 0c 8f 40 00 Error: ICRC, ABRT at LBA = 0x80000c8f = 2147486863
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 02 00 00 08 00 00 80 00 0a 90 40 00 00:07:12.329 READ FPDMA QUEUED
- 60 00 08 00 00 00 00 95 fe 85 00 40 00 00:07:12.323 READ FPDMA QUEUED
- 60 01 00 00 f0 00 00 80 00 09 90 40 00 00:07:12.296 READ FPDMA QUEUED
- b0 00 d0 00 01 00 00 00 c2 4f 00 00 00 00:07:11.224 SMART READ DATA
- ec 00 00 00 01 00 00 00 00 00 00 00 00 00:07:11.217 IDENTIFY DEVICE
- Error 6 [5] occurred at disk power-on lifetime: 4246 hours (176 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 84 -- 43 00 10 00 06 80 7f 0a d7 40 00 Error: ICRC, ABRT at LBA = 0x6807f0ad7 = 27925613271
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 20 00 20 00 06 02 c8 ca c0 40 00 00:04:53.833 READ FPDMA QUEUED
- 60 00 20 00 18 00 02 81 6e b6 58 40 00 00:04:53.822 READ FPDMA QUEUED
- 60 00 08 00 10 00 06 80 7f 0a d0 40 00 00:04:53.810 READ FPDMA QUEUED
- 60 00 20 00 08 00 02 01 c5 db 20 40 00 00:04:53.797 READ FPDMA QUEUED
- 60 00 20 00 00 00 05 00 bb 09 b0 40 00 00:04:53.783 READ FPDMA QUEUED
- Error 5 [4] occurred at disk power-on lifetime: 4245 hours (176 days + 21 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 84 -- 43 00 10 00 07 86 2a 4f ff 40 00 Error: ICRC, ABRT at LBA = 0x7862a4fff = 32315691007
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 01 00 00 10 00 07 86 2a 4f 00 40 00 12:24:18.621 READ FPDMA QUEUED
- ec 00 00 00 01 00 00 00 00 00 00 00 00 12:24:18.615 IDENTIFY DEVICE
- ef 00 10 00 03 00 00 00 00 00 00 a0 00 12:24:18.615 SET FEATURES [Enable SATA feature]
- 47 00 00 00 01 00 00 00 00 00 00 a0 00 12:24:18.615 READ LOG DMA EXT
- 47 00 00 00 01 00 00 00 00 08 30 a0 00 12:24:18.612 READ LOG DMA EXT
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Completed without error 00% 4279 -
- # 2 Short offline Completed without error 00% 4252 -
- # 3 Short offline Interrupted (host reset) 60% 4246 -
- # 4 Extended offline Completed without error 00% 2916 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 1 (0x0001)
- Device State: Active (0)
- Current Temperature: 27 Celsius
- Power Cycle Min/Max Temperature: 23/36 Celsius
- Lifetime Min/Max Temperature: 14/44 Celsius
- Specified Max Operating Temperature: 60 Celsius
- Under/Over Temperature Limit Count: 0/0
- SMART Status: 0xc24f (PASSED)
- Vendor specific:
- 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
- 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 10/40 Celsius
- Min/Max Temperature Limit: 5/60 Celsius
- Temperature History Size (Index): 478 (444)
- Index Estimated Time Temperature Celsius
- 445 2024-03-06 23:42 28 *********
- 446 2024-03-06 23:43 29 **********
- ... ..( 4 skipped). .. **********
- 451 2024-03-06 23:48 29 **********
- 452 2024-03-06 23:49 28 *********
- ... ..( 14 skipped). .. *********
- 467 2024-03-07 00:04 28 *********
- 468 2024-03-07 00:05 27 ********
- ... ..(160 skipped). .. ********
- 151 2024-03-07 02:46 27 ********
- 152 2024-03-07 02:47 28 *********
- ... ..( 6 skipped). .. *********
- 159 2024-03-07 02:54 28 *********
- 160 2024-03-07 02:55 29 **********
- ... ..( 7 skipped). .. **********
- 168 2024-03-07 03:03 29 **********
- 169 2024-03-07 03:04 28 *********
- ... ..( 15 skipped). .. *********
- 185 2024-03-07 03:20 28 *********
- 186 2024-03-07 03:21 27 ********
- ... ..( 51 skipped). .. ********
- 238 2024-03-07 04:13 27 ********
- 239 2024-03-07 04:14 28 *********
- ... ..( 5 skipped). .. *********
- 245 2024-03-07 04:20 28 *********
- 246 2024-03-07 04:21 29 **********
- ... ..( 19 skipped). .. **********
- 266 2024-03-07 04:41 29 **********
- 267 2024-03-07 04:42 30 ***********
- ... ..( 29 skipped). .. ***********
- 297 2024-03-07 05:12 30 ***********
- 298 2024-03-07 05:13 29 **********
- ... ..( 8 skipped). .. **********
- 307 2024-03-07 05:22 29 **********
- 308 2024-03-07 05:23 28 *********
- ... ..( 12 skipped). .. *********
- 321 2024-03-07 05:36 28 *********
- 322 2024-03-07 05:37 27 ********
- ... ..( 39 skipped). .. ********
- 362 2024-03-07 06:17 27 ********
- 363 2024-03-07 06:18 26 *******
- ... ..( 22 skipped). .. *******
- 386 2024-03-07 06:41 26 *******
- 387 2024-03-07 06:42 27 ********
- 388 2024-03-07 06:43 26 *******
- ... ..( 6 skipped). .. *******
- 395 2024-03-07 06:50 26 *******
- 396 2024-03-07 06:51 27 ********
- 397 2024-03-07 06:52 26 *******
- 398 2024-03-07 06:53 27 ********
- ... ..( 4 skipped). .. ********
- 403 2024-03-07 06:58 27 ********
- 404 2024-03-07 06:59 28 *********
- ... ..( 6 skipped). .. *********
- 411 2024-03-07 07:06 28 *********
- 412 2024-03-07 07:07 29 **********
- ... ..( 4 skipped). .. **********
- 417 2024-03-07 07:12 29 **********
- 418 2024-03-07 07:13 28 *********
- ... ..( 14 skipped). .. *********
- 433 2024-03-07 07:28 28 *********
- 434 2024-03-07 07:29 27 ********
- ... ..( 9 skipped). .. ********
- 444 2024-03-07 07:39 27 ********
- SCT Error Recovery Control:
- Read: Disabled
- Write: Disabled
- Device Statistics (GP Log 0x04)
- Page Offset Size Value Flags Description
- 0x01 ===== = = === == General Statistics (rev 3) ==
- 0x01 0x008 4 150 --- Lifetime Power-On Resets
- 0x01 0x010 4 4289 --- Power-on Hours
- 0x01 0x018 6 92310616368 --- Logical Sectors Written
- 0x01 0x020 6 112486002 --- Number of Write Commands
- 0x01 0x028 6 27722449400 --- Logical Sectors Read
- 0x01 0x030 6 115028953 --- Number of Read Commands
- 0x01 0x038 6 15440400000 --- Date and Time TimeStamp
- 0x01 0x040 4 0 --- Pending Error Count
- 0x02 ===== = = === == Free-Fall Statistics (rev 1) ==
- 0x02 0x010 4 0 --- Overlimit Shock Events
- 0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
- 0x03 0x008 4 799 --- Spindle Motor Power-on Hours
- 0x03 0x010 4 941 --- Head Flying Hours
- 0x03 0x018 4 1592 --- Head Load Events
- 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
- 0x03 0x028 4 8 --- Read Recovery Attempts
- 0x03 0x030 4 0 --- Number of Mechanical Start Failures
- 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors
- 0x03 0x040 4 107 --- Number of High Priority Unload Events
- 0x04 ===== = = === == General Errors Statistics (rev 1) ==
- 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
- 0x04 0x010 4 31 --- Resets Between Cmd Acceptance and Completion
- 0x04 0x018 4 0 -D- Physical Element Status Changed
- 0x05 ===== = = === == Temperature Statistics (rev 1) ==
- 0x05 0x008 1 27 --- Current Temperature
- 0x05 0x010 1 31 N-- Average Short Term Temperature
- 0x05 0x018 1 25 N-- Average Long Term Temperature
- 0x05 0x020 1 44 --- Highest Temperature
- 0x05 0x028 1 14 --- Lowest Temperature
- 0x05 0x030 1 38 N-- Highest Average Short Term Temperature
- 0x05 0x038 1 22 N-- Lowest Average Short Term Temperature
- 0x05 0x040 1 30 N-- Highest Average Long Term Temperature
- 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature
- 0x05 0x050 4 0 --- Time in Over-Temperature
- 0x05 0x058 1 60 --- Specified Maximum Operating Temperature
- 0x05 0x060 4 0 --- Time in Under-Temperature
- 0x05 0x068 1 5 --- Specified Minimum Operating Temperature
- 0x06 ===== = = === == Transport Statistics (rev 1) ==
- 0x06 0x008 4 523 --- Number of Hardware Resets
- 0x06 0x010 4 111 --- Number of ASR Events
- 0x06 0x018 4 14 --- Number of Interface CRC Errors
- 0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
- |||_ C monitored condition met
- ||__ D supports DSN
- |___ N normalized value
- Pending Defects log (GP Log 0x0c)
- No Defects Logged
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 4 0 Command failed due to ICRC error
- 0x0002 4 0 R_ERR response for data FIS
- 0x0003 4 0 R_ERR response for device-to-host data FIS
- 0x0004 4 0 R_ERR response for host-to-device data FIS
- 0x0005 4 0 R_ERR response for non-data FIS
- 0x0006 4 0 R_ERR response for device-to-host non-data FIS
- 0x0007 4 0 R_ERR response for host-to-device non-data FIS
- 0x0008 4 0 Device-to-host non-data FIS retries
- 0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
- 0x000a 4 0 Device-to-host register FISes sent due to a COMRESET
- 0x000b 4 0 CRC errors within host-to-device FIS
- 0x000d 4 0 Non-CRC errors within host-to-device FIS
- 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
- 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
- 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
- 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement