API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Dec 11th, 2018
298
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 63.39 KB | None | 0 0
raw download clone embed print report
  1. QA5:A;SVN:B72;POC:17F;STS:0;BOOT:0;INIT:0;READ:0;CHECK:0;PASS:0;
  2. no sdio debug board detected
  3. TE : 1279346
  4. BT : 10:34:24 Nov 30 2016
  5. PMU:NONE
  6. ##### VDDEE voltage = 0x044c
  7.  
  8. CPU clock is 792MHz
  9.  
  10. DDR mode: 32 bit mode
  11. DDR size: 1GB (auto)
  12. DDR check: Pass!
  13. DDR clock: 588MHz with 2T mode
  14. DDR pll bypass: Disabled
  15. DDR init use : 14883 us
  16.  
  17. HHH
  18. Boot From SDIO C
  19. SD_boot_type: 00000002
  20. card_type: 00000003
  21. 0x0000009f
  22. ucl decompress...pass
  23. 0x12345678
  24. Boot from internal device 1st tSD/fSD on SDIO C
  25.  
  26. TE : 1501993
  27.  
  28. System Started
  29.  
  30.  
  31. U-boot-00000-g20f4f42-dirty(m8b_m201_v1@20f4f42d) (Nov 30 2016 - 10:34:21)
  32.  
  33. clr h-ram
  34. DRAM: 1 GiB
  35. relocation Offset is: 2fec8000
  36. show partition table:
  37. part: 0, name : logo, size : 2000000
  38. part: 1, name : recovery, size : 2000000
  39. part: 2, name : misc, size : 2000000
  40. part: 3, name : boot, size : 2000000
  41. part: 4, name : system, size : 40000000
  42. part: 5, name : cache, size : 20000000
  43. part: 6, name : data, size : end
  44. aml_card_type=0x100
  45. MMC: [mmc_register] add mmc dev_num=0, port=1, if_type=6
  46. [mmc_register] add mmc dev_num=1, port=2, if_type=6
  47. SDIO Port B: 0, SDIO Port C: 1
  48. power init
  49. out reg=c110804c,value=dfffffff
  50. IR init done!
  51. register usb cfg[0][1] = 3ff738dc
  52. register usb cfg[2][0] = 3ff76460
  53. NAND: EMMC BOOT: not init nand
  54. do not init nand : cause boot_device_flag without nand
  55. get_boot_device_flag: init_ret -1
  56. get_boot_device_flag EMMC BOOT:
  57. Emmckey: Access range is illegal!
  58. [mmc_init] SDIO Port C:1, if_type=6, initialized OK!
  59. [mmc_get_partition_table] skip cache partition.
  60. Partition table get from SPL is :
  61. name offset size flag
  62. ===================================================================================
  63. 0: bootloader 0 400000 0
  64. 1: reserved 2400000 4000000 0
  65. 2: cache 6c00000 20000000 2
  66. 3: env 27400000 800000 0
  67. 4: logo 28400000 2000000 1
  68. 5: recovery 2ac00000 2000000 1
  69. 6: misc 2d400000 2000000 1
  70. 7: boot 2fc00000 2000000 1
  71. 8: system 32400000 40000000 1
  72. 9: data 72c00000 79400000 4
  73. mmc read lba=0x12000, blocks=0x1
  74. mmc read lba=0x12001, blocks=0x1
  75. mmc_read_partition_tbl: mmc read partition OK!
  76. eMMC/TSD partition table have been checked OK!
  77. i=0,register --- emmc_key
  78. MMC BOOT, emmc_env_relocate_spec : env_relocate_spec 59
  79. set_storage_device_flag: store 2
  80. vpu clk_level in dts: 3
  81. set vpu clk: 182150000Hz, readback: 182150000Hz(0x701)
  82. board_set_output hdmi
  83. Net: Meson_Ethernet
  84. init suspend firmware done. (ret:0)
  85. cvbs trimming.1.v5: 0xa0, 0x0
  86. hdmi tx power init
  87. mode = 8 vic = 16
  88. set HDMI vic: 16
  89. mode is: 8
  90. viu chan = 1
  91. config HPLL
  92. config HPLL done
  93. reconfig packet setting done
  94. reboot_mode=charging
  95. Enter v2 usbburning mode
  96. Try connect time out 751, 750
  97. Hit Enter key to stop autoboot -- : 0
  98. exit abortboot: 0
  99. (Re)start USB(0)...
  100. USB: dwc_usb driver version: 2.94 6-June-2012
  101. USB (1) peri reg base: c1108820
  102. USB (1) use clock source: XTAL input
  103. USB (1) base addr: 0xc90c0000
  104. Force id mode: Host
  105. dwc_otg: Highspeed device found !
  106.  
  107. scanning bus for devices... 1 USB Device(s) found
  108. scanning bus for storage devices... 1 Storage Device(s) found
  109. reading s805_autoscript
  110.  
  111. 1991 bytes read
  112. ## Executing script at 11000000
  113. MMC: block number 0x1 exceeds max(0x0)
  114. ** Can't read from device 0 **
  115.  
  116. ** Unable to use mmc 0:1 for fatload **
  117. reading uInitrd
  118. ....................................................................................................................................................................................................................................................................................................................................................................................................................................
  119.  
  120. 4303636 bytes read
  121. reading uImage
  122. ..................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
  123.  
  124. 5923409 bytes read
  125. reading dtb.img
  126. ..
  127.  
  128. 23306 bytes read
  129. ## Booting kernel from Legacy Image at 14000000 ...
  130. Image Name: Linux-3.10.108
  131. Image Type: ARM Linux Kernel Image (gzip compressed)
  132. Data Size: 5923345 Bytes = 5.6 MiB
  133. Load Address: 00208000
  134. Entry Point: 00208000
  135. Verifying Checksum ... OK
  136. ## Loading init Ramdisk from Legacy Image at 15000000 ...
  137. Image Name: uInitrd
  138. Image Type: ARM Linux RAMDisk Image (gzip compressed)
  139. Data Size: 4303572 Bytes = 4.1 MiB
  140. Load Address: 00000000
  141. Entry Point: 00000000
  142. Verifying Checksum ... OK
  143. ## Flattened Device Tree blob at 11800000
  144. Booting using the fdt blob at 0x11800000
  145. board_usb_stop cfg: 0
  146. Uncompressing Kernel Image ... OK
  147. uboot time: 19986770 us.
  148. EFUSE machid is not set.
  149. Using machid 0xf81 from environment
  150. From device tree /memory/ node aml_reserved_end property, for relocate ramdisk and fdt, relocate_addr: 0x5424001
  151. Loading Ramdisk to 05009000, end 05423ad4 ... OK
  152. Loading Device Tree to 05000000, end 05008b09 ... OK
  153.  
  154. Starting kernel ...
  155.  
  156. [ 0.000000@0] Booting Linux on physical CPU 0x200
  157. [ 0.000000@0] Initializing cgroup subsys cpu
  158. [ 0.000000@0] Initializing cgroup subsys cpuacct
  159. [ 0.000000@0] Linux version 3.10.108-vegas805 (root@CompileServer) (gcc version 6.4.1 20171012 (Linaro GCC 6.4-2017.11) ) #2 SMP PREEMPT Tue May 22 08:21:51 MSK 2018
  160. [ 0.000000@0] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c5387d
  161. [ 0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  162. [ 0.000000@0] Machine: Amlogic Meson8B, model: AMLOGIC
  163. [ 0.000000@0] physical memory start address is 0x200000
  164. [ 0.000000@0] reserved_end is 79fffff
  165. [ 0.000000@0]
  166. [ 0.000000@0] Total memory is 1022 MiB
  167. [ 0.000000@0] Reserved low memory from 0x06000000 to 0x079fffff, size: 26 MiB
  168. [ 0.000000@0] mesonfb0(low) : 0x06100000 - 0x07900000 ( 24 MiB)
  169. [ 0.000000@0] mesonfb1(low) : 0x07900000 - 0x07a00000 ( 1 MiB)
  170. [ 0.000000@0] deinterlace0(high) : 0x3df00000 - 0x40000000 ( 33 MiB)
  171. [ 0.000000@0] mesonstream0(high) : 0x3bf00000 - 0x3df00000 ( 32 MiB)
  172. [ 0.000000@0] vdec0(high) : 0x37f00000 - 0x3bf00000 ( 64 MiB)
  173. [ 0.000000@0] ppmgr0(high) : 0x36f00000 - 0x37f00000 ( 16 MiB)
  174. [ 0.000000@0] Memory policy: ECC disabled, Data cache writealloc
  175. [ 0.000000@0] Meson chip version = RevA (1B:A - 0:B72)
  176. [ 0.000000@0] PERCPU: Embedded 8 pages/cpu @c1515000 s8512 r8192 d16064 u32768
  177. [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 212752
  178. [ 0.000000@0] Kernel command line: root=LABEL=ROOTFS rootflags=data=writeback rw console=ttyS0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.repair=yes net.ifnames=0 mac=
  179. [ 0.000000@0] ******** uboot setup mac-addr: 0:0:92:2b:51:c1
  180. [ 0.000000@0] PID hash table entries: 4096 (order: 2, 16384 bytes)
  181. [ 0.000000@0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  182. [ 0.000000@0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  183. [ 0.000000@0] Memory: 64MB 16MB 757MB = 837MB total
  184. [ 0.000000@0] Memory: 830316k/830316k available, 26772k reserved, 119808K highmem
  185. [ 0.000000@0] Virtual kernel memory layout:
  186. [ 0.000000@0] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  187. [ 0.000000@0] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  188. [ 0.000000@0] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  189. [ 0.000000@0] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  190. [ 0.000000@0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  191. [ 0.000000@0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  192. [ 0.000000@0] .text : 0xc0008000 - 0xc0ae7bd4 (11135 kB)
  193. [ 0.000000@0] .init : 0xc0ae8000 - 0xc0b21140 ( 229 kB)
  194. [ 0.000000@0] .data : 0xc0b22000 - 0xc0b87eb8 ( 408 kB)
  195. [ 0.000000@0] .bss : 0xc0b87eb8 - 0xc0e266b0 (2682 kB)
  196. [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  197. [ 0.000000@0] Preemptible hierarchical RCU implementation.
  198. [ 0.000000@0] RCU debugfs-based tracing is enabled.
  199. [ 0.000000@0] NR_IRQS:256
  200. [ 0.000000@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
  201. [ 0.000000@0] Global timer: MESON TIMER-F (c0b41680) initialized
  202. [ 0.000000@0] Switching to timer-based delay loop
  203. [ 0.000000@0] Console: colour dummy device 80x30
  204. [ 0.000000@0] console [tty0] enabled
  205. [ 0.000000@0] console [ttyS0] enabled
  206. [ 0.297967@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
  207. [ 0.308236@0] pid_max: default: 32768 minimum: 301
  208. [ 0.313282@0] Security Framework initialized
  209. [ 0.317260@0] SELinux: Initializing.
  210. [ 0.321151@0] Mount-cache hash table entries: 512
  211. [ 0.333551@0] Initializing cgroup subsys debug
  212. [ 0.333641@0] Initializing cgroup subsys freezer
  213. [ 0.337085@0] CPU: Testing write buffer coherency: ok
  214. [ 0.342652@0] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200
  215. [ 0.347882@0] Setting up static identity map for 0xc07f96e0 - 0xc07f9738
  216. [ 0.354732@0] L310 cache controller enabled
  217. [ 0.358650@0] l2x0: 8 ways, 2048 sets, CACHE_ID 0x4100a0c9, Cache size: 524288 B
  218. [ 0.366160@0] AUX_CTRL 0x7ec60001, PERFETCH_CTRL 0x75000007, POWER_CTRL 0x00000000
  219. [ 0.374249@0] TAG_LATENCY 0x00000111, DATA_LATENCY 0x00000222
  220. [ 0.460494@1] CPU1: Booted secondary processor
  221. [ 0.460523@1] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201
  222. [ 0.480481@2] CPU2: Booted secondary processor
  223. [ 0.480499@2] CPU2: thread -1, cpu 2, socket 2, mpidr 80000202
  224. [ 0.500481@3] CPU3: Booted secondary processor
  225. [ 0.500499@3] CPU3: thread -1, cpu 3, socket 2, mpidr 80000203
  226. [ 0.500633@0] Brought up 4 CPUs
  227. [ 0.528842@0] SMP: Total of 4 processors activated (8.00 BogoMIPS).
  228. [ 0.535064@0] CPU: All CPU(s) started in SVC mode.
  229. [ 0.540888@0] devtmpfs: initialized
  230. [ 0.552767@0] clkrate [ xtal ] : 24000000
  231. [ 0.552829@0] clkrate [ pll_sys ] : 792000000
  232. [ 0.555671@0] clkrate [ pll_fixed ] : 2550000000
  233. [ 0.560378@0] clkrate [ pll_vid ] : 366000000
  234. [ 0.564760@0] clkrate [ pll_ddr ] : 0
  235. [ 0.568485@0] clkrate [ a9_clk ] : 792000000
  236. [ 0.572833@0] clkrate [ clk81 ] : 159375000
  237. [ 0.577626@0] xor: measuring software checksum speed
  238. [ 0.680032@0] arm4regs : 614.000 MB/sec
  239. [ 0.780035@0] 8regs : 559.200 MB/sec
  240. [ 0.880031@0] 32regs : 584.000 MB/sec
  241. [ 0.880082@0] xor: using function: arm4regs (614.000 MB/sec)
  242. [ 0.884401@0] pinctrl core: initialized pinctrl subsystem
  243. [ 0.890126@0] regulator-dummy: no parameters
  244. [ 0.894318@0] NET: Registered protocol family 16
  245. [ 0.902952@0] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  246. [ 0.907003@0] VPU driver version: v02
  247. [ 0.909335@0] load vpu_clk in dts: 182150000Hz(3)
  248. [ 0.914087@0] vpu_probe OK
  249. [ 0.920467@0] amlogic_gpio gpio: Probed amlogic GPIO driver
  250. [ 0.922693@0] register lm device lm-root
  251. [ 0.926178@0] register lm device lm1
  252. [ 0.929724@0] register lm device lm0
  253. [ 0.933483@0] Init pinux probe!
  254. [ 0.937515@0] pinmux-m8b pinmux: Probed amlogic pinctrl driver
  255. [ 0.942218@0] tv_init_module
  256. [ 0.945023@0] major number 254 for disp
  257. [ 0.948815@0] vout_register_server
  258. [ 0.952212@0] register tv module server ok
  259. [ 0.956354@0] aml_i2c version: 20140813
  260. [ 0.960334@0] aml-i2c i2c-AO: add adapter aml_i2c_adap0(ef354ca8)
  261. [ 0.966138@0] aml-i2c i2c-AO: aml i2c bus driver.
  262. [ 0.971043@0] aml-i2c i2c-A: add adapter aml_i2c_adap1(ef3550a8)
  263. [ 0.976788@0] aml-i2c i2c-A: aml i2c bus driver.
  264. [ 0.981593@0] aml-i2c i2c-B: add adapter aml_i2c_adap2(ef3554a8)
  265. [ 0.987352@0] aml-i2c i2c-B: aml i2c bus driver.
  266. [ 0.992135@0] aml-i2c i2c-C: add adapter aml_i2c_adap3(ef3558a8)
  267. [ 0.997915@0] aml-i2c i2c-C: aml i2c bus driver.
  268. [ 1.002718@0] aml-i2c i2c-D: add adapter aml_i2c_adap4(ef355ca8)
  269. [ 1.008479@0] aml-i2c i2c-D: aml i2c bus driver.
  270. [ 1.013220@0] aml_pmu_init, 458
  271. [ 1.016222@0] call aml_dvfs_init in
  272. [ 1.019994@0] hdmitx: system: amhdmitx_init
  273. [ 1.023826@0] hdmitx: system: Ver: 2014May6
  274. [ 1.028063@0] hdmitx: system: amhdmitx_probe
  275. [ 1.032609@0] hdmitx: system: gate/pwr cmd: 7
  276. [ 1.036532@0] hdmitx: system: ALREADY init VIC = 16
  277. [ 1.041404@0] hdmitx: system: gate/pwr cmd: 0
  278. [ 1.046234@1] hdmitx: system: reset intr mask
  279. [ 1.070578@0] hdmitx: system: irq 1
  280. [ 1.096815@0] bio: create slab <bio-0> at 0
  281. [ 1.180946@1] hdmitx: system: gate/pwr cmd: 4
  282. [ 1.260677@0] raid6: int32x1 96 MB/s
  283. [ 1.390869@1] hdmitx: system: gate/pwr cmd: 5
  284. [ 1.390920@1] hdmitx: edid: edid ready
  285. [ 1.393329@1] hdmitx: system: gate/pwr cmd: 4
  286. [ 1.430223@0] raid6: int32x2 122 MB/s
  287. [ 1.600239@0] raid6: int32x4 154 MB/s
  288. [ 1.600877@1] hdmitx: system: gate/pwr cmd: 5
  289. [ 1.602870@1] hdmitx: edid: edid ready
  290. [ 1.606598@1] hdmitx: edid: check sum valid
  291. [ 1.610769@1] hdmitx: edid: check sum valid
  292. [ 1.614907@1] hdmitx: edid: blk0 raw data
  293. [ 1.618888@1] 00ffffffffffff0010acd9a04c464d32241a010380301b78eac7b5a756539c27
  294. [ 1.626074@1] 105054a54b00714f8180a9c0d1c00101010101010101023a801871382d40582c
  295. [ 1.633261@1] 4500dc0b1100001e000000ff005046523744363932324d464c0a000000fc0044
  296. [ 1.640447@1] 454c4c205032323137480a20000000fd00384c1e5311000a20202020202001db
  297. [ 1.647634@1]
  298. [ 1.649281@1] hdmitx: edid: blk1 raw data
  299. [ 1.653276@1] 020317b14c9005040302071601141f121365030c001000023a801871382d4058
  300. [ 1.660449@1] 2c4500dc0b1100001e011d8018711c1620582c2500dc0b1100009e011d007251
  301. [ 1.667636@1] d01e206e285500dc0b1100001e8c0ad08a20e02d10103e9600dc0b1100001800
  302. [ 1.674823@1] 00000000000000000000000000000000000000000000000000000000000000bd
  303. [ 1.682009@1]
  304. [ 1.684505@1] hdmitx: edid: find IEEEOUT
  305. [ 1.687617@1] hdmitx: video: cann't get valid mode
  306. [ 1.692346@1] hdmitx: audio: audio channel num is 0
  307. [ 1.697169@1] hdmitx: audio: SPDIF
  308. [ 1.700565@1] hdmitx: audio: current VIC: 16
  309. [ 1.704784@1] hdmitx: audio: audio sample rate: 0
  310. [ 1.709459@1] hdmitx: audio: reset audio N para
  311. [ 1.713988@1] Unable to handle kernel NULL pointer dereference at virtual address 00000000
  312. [ 1.722212@1] pgd = c0004000
  313. [ 1.725046@1] [00000000] *pgd=00000000
  314. [ 1.728774@1] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
  315. [ 1.734223@1] Modules linked in:
  316. [ 1.737434@1] CPU: 1 PID: 31 Comm: kthread_hdmi Not tainted 3.10.108-vegas805 #2
  317. [ 1.744791@1] task: ef2d8cc0 ti: ef38a000 task.ti: ef38a000
  318. [ 1.750342@1] PC is at hdmitx_set_audmode+0x368/0x718
  319. [ 1.755362@1] LR is at _raw_spin_unlock_irqrestore+0x28/0x48
  320. [ 1.760984@1] pc : [<c0023804>] lr : [<c07f9150>] psr: 80000113
  321. [ 1.760984@1] sp : ef38beb0 ip : ffbf6cff fp : 00000001
  322. [ 1.770258@0] raid6: int32x8 159 MB/s
  323. [ 1.770264@0] raid6: using algorithm int32x8 (159 MB/s)
  324. [ 1.770268@0] raid6: using intx1 recovery algorithm
  325. [ 1.770737@0] SCSI subsystem initialized
  326. [ 1.771006@0] usbcore: registered new interface driver usbfs
  327. [ 1.771081@0] usbcore: registered new interface driver hub
  328. [ 1.801677@1] r10: 00000000 r9 : 14001000 r8 : 00000000
  329. [ 1.807047@1] r7 : c0e16908 r6 : c0e171d8 r5 : c0b4427c r4 : 00001880
  330. [ 1.813714@1] r3 : 00000000 r2 : 00000001 r1 : 00004970 r0 : 00000000
  331. [ 1.820383@1] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
  332. [ 1.827829@1] Control: 10c5387d Table: 0020404a DAC: 00000015
  333. [ 1.833714@1]
  334. [ 1.833714@1] PC: 0xc0023784:
  335. [ 1.838302@1] 3784 e3a0005d eb0008b1 e3c01030 e3811020 e3a0005d eb0008c5 ea000011 e3a0005d
  336. [ 1.846614@1] 37a4 eb0008aa e3c01030 e3811010 e3a0005d eb0008be ea00000a e3a0005d eb0008a3
  337. [ 1.854927@1] 37c4 e3801030 e3a0005d eb0008b8 ea000004 e3a0005d eb00089d e3c01030 e3a0005d
  338. [ 1.863239@1] 37e4 eb0008b2 e5963000 e353000a 0a000001 e353000b 1a000000 e1a04104 e3041970
  339. [ 1.871551@1] 3804 e5980000 e34c109c e3a02009 eb100d94 e3500000 1a000002 e3083680 e34c30b8
  340. [ 1.879864@1] 3824 e5834404 e6ef1074 e3a0001c eb00089f e7e71454 e3a0001d eb00089c e7e31854
  341. [ 1.888176@1] 3844 e3811030 e3a0001e eb000898 e3a0005d eb00087e e3a04a05 e34f4e10 e3801001
  342. [ 1.896489@1] 3864 e3a0005d eb000891 e3a01000 e3a00002 eb00088e e3a01000 e3a00003 eb00088b
  343. [ 1.904803@1]
  344. [ 1.904803@1] LR: 0xc07f90d0:
  345. [ 1.909391@1] 90d0 e5930000 e7e000d0 e3500000 1afffff3 e8bd8070 e92d4010 f57ff05f e1d030b0
  346. [ 1.917703@1] 90f0 e2833001 e1c030b0 f57ff04f e320f004 e3a00001 ebe162b7 e1a0300d e3c33d7f
  347. [ 1.926015@1] 9110 e3c3303f e5933000 e3130002 08bd8010 e8bd4010 eafffc6c e92d4010 f57ff05f
  348. [ 1.934328@1] 9130 e1d030b0 e2833001 e1c030b0 f57ff04f e320f004 e121f001 e3a00001 ebe162a5
  349. [ 1.942640@1] 9150 e1a0300d e3c33d7f e3c3303f e5933000 e3130002 08bd8010 e8bd4010 eafffc5a
  350. [ 1.950953@1] 9170 e92d4010 f57ff05f e1d030b0 e2833001 e1c030b0 f57ff04f e320f004 f1080080
  351. [ 1.959265@1] 9190 e3a00001 ebe16293 e1a0300d e3c33d7f e3c3303f e5933000 e3130002 08bd8010
  352. [ 1.967578@1] 91b0 e8bd4010 eafffc48 e92d4070 e1a04000 e3a00001 ebe1624c e1943f9f e3a05000
  353. [ 1.975892@1]
  354. [ 1.975892@1] SP: 0xef38be30:
  355. [ 1.980480@1] be30 00000000 00000000 00000000 00000000 c0b8acc4 00000021 00000000 00000000
  356. [ 1.988792@1] be50 c0023804 80000113 ffffffff ef38be9c 00000000 c000d998 00000000 00004970
  357. [ 1.997104@1] be70 00000001 00000000 00001880 c0b4427c c0e171d8 c0e16908 00000000 14001000
  358. [ 2.005417@1] be90 00000000 00000001 ffbf6cff ef38beb0 c07f9150 c0023804 80000113 ffffffff
  359. [ 2.013729@1] beb0 c0b8acc4 00000000 00000000 c0e16908 00000001 c0e171d8 15000013 14001000
  360. [ 2.022042@1] bed0 00000000 c0656714 00000000 00000000 00000000 00000000 00000000 00000000
  361. [ 2.030354@1] bef0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  362. [ 2.038667@1] bf10 00000000 00000000 00000000 00000000 00000000 00000000 c0e16908 c0e16908
  363. [ 2.046981@1]
  364. [ 2.046981@1] IP: 0xffbf6c7f:
  365. [ 2.051568@1] 6c7c ******** ******** ******** ******** ******** ******** ******** ********
  366. [ 2.059881@1] 6c9c ******** ******** ******** ******** ******** ******** ******** ********
  367. [ 2.068194@1] 6cbc ******** ******** ******** ******** ******** ******** ******** ********
  368. [ 2.076506@1] 6cdc ******** ******** ******** ******** ******** ******** ******** ********
  369. [ 2.084818@1] 6cfc ******** ******** ******** ******** ******** ******** ******** ********
  370. [ 2.093131@1] 6d1c ******** ******** ******** ******** ******** ******** ******** ********
  371. [ 2.101443@1] 6d3c ******** ******** ******** ******** ******** ******** ******** ********
  372. [ 2.109756@1] 6d5c ******** ******** ******** ******** ******** ******** ******** ********
  373. [ 2.118068@1] 6d7c ******** ******** ******** ******** ******** ******** ******** ********
  374. [ 2.126383@1]
  375. [ 2.126383@1] R5: 0xc0b441fc:
  376. [ 2.130970@1] 41fc 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  377. [ 2.139282@1] 421c 00000000 00000000 00000000 00000000 00000000 00000000 00000000 fe1080b0
  378. [ 2.147595@1] 423c fe1080b4 fe1080b8 fe1080bc fe1080c0 fe1080c4 fe1080c8 fe1080cc fe1080d0
  379. [ 2.155907@1] 425c fe1080d4 fe600014 00000001 00000000 c0b4426c c0b4426c 00000000 00000000
  380. [ 2.164220@1] 427c 00004901 00000001 00000101 00000001 00000001 00001b8d 00004040 00001c3a
  381. [ 2.172532@1] 429c 00000112 00001c3b 00000892 00001c3c 00000029 00001c3d 00000461 00001c30
  382. [ 2.180845@1] 42bc 00000052 00001c31 0000007e 00001c32 00000000 00001c34 00000005 00001c36
  383. [ 2.189157@1] 42dc 00000052 00001c38 00000052 00001c51 00000000 00001b62 0000809d 00000000
  384. [ 2.197471@1]
  385. [ 2.197471@1] R6: 0xc0e17158:
  386. [ 2.202059@1] 7158 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  387. [ 2.210371@1] 7178 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  388. [ 2.218684@1] 7198 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  389. [ 2.226996@1] 71b8 00000000 00000000 00000000 00000000 00000000 000000db 00000000 0000000c
  390. [ 2.235309@1] 71d8 00000000 00000000 00000000 00000000 00000000 00001000 00010001 00000000
  391. [ 2.243621@1] 71f8 00000000 00000001 00000001 00000002 00000001 00000001 00000000 00000000
  392. [ 2.251934@1] 7218 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  393. [ 2.260246@1] 7238 00000000 00000000 00000000 00000000 00000000 00000000 00000005 6f010001
  394. [ 2.268560@1]
  395. [ 2.268560@1] R7: 0xc0e16888:
  396. [ 2.273148@1] 6888 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  397. [ 2.281460@1] 68a8 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  398. [ 2.289773@1] 68c8 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  399. [ 2.298085@1] 68e8 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  400. [ 2.306398@1] 6908 00000000 c0e1690c c0e1690c 00000000 00000000 c0b4a8d4 00000000 00000001
  401. [ 2.314710@1] 6928 00000001 00000000 c08ae650 c0e16934 c0e16934 0fd00000 00000020 00000000
  402. [ 2.323023@1] 6948 ef2d8cc0 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  403. [ 2.331335@1] 6968 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  404. [ 2.339652@1] Process kthread_hdmi (pid: 31, stack limit = 0xef38a238)
  405. [ 2.346145@1] Stack: (0xef38beb0 to 0xef38c000)
  406. [ 2.350652@1] bea0: c0b8acc4 00000000 00000000 c0e16908
  407. [ 2.358966@1] bec0: 00000001 c0e171d8 15000013 14001000 00000000 c0656714 00000000 00000000
  408. [ 2.367278@1] bee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  409. [ 2.375590@1] bf00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  410. [ 2.383904@1] bf20: 00000000 00000000 c0e16908 c0e16908 c0e16908 c0b78c44 13000002 c0655f18
  411. [ 2.392216@1] bf40: ef2d8cc0 ef279e08 00000000 c0e16908 c0655ab4 00000000 00000000 00000000
  412. [ 2.400529@1] bf60: 00000000 c0049148 ddffffdf 00000000 ffffffff c0e16908 00000000 00000000
  413. [ 2.408841@1] bf80: ef38bf80 ef38bf80 00000000 00000000 ef38bf90 ef38bf90 ef38bfac ef279e08
  414. [ 2.417153@1] bfa0: c004909c 00000000 00000000 c000dec0 00000000 00000000 00000000 00000000
  415. [ 2.425465@1] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  416. [ 2.433778@1] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 fbffffff ffffffff
  417. [ 2.442116@1] [<c0023804>] (hdmitx_set_audmode+0x368/0x718) from [<c0656714>] (hdmitx_set_audio+0x50/0x2fc)
  418. [ 2.451797@1] [<c0656714>] (hdmitx_set_audio+0x50/0x2fc) from [<c0655f18>] (hdmi_task_handle+0x464/0x5c0)
  419. [ 2.461325@1] [<c0655f18>] (hdmi_task_handle+0x464/0x5c0) from [<c0049148>] (kthread+0xac/0xb8)
  420. [ 2.469982@1] [<c0049148>] (kthread+0xac/0xb8) from [<c000dec0>] (ret_from_fork+0x14/0x34)
  421. [ 2.478198@1] Code: e353000b 1a000000 e1a04104 e3041970 (e5980000)
  422. [ 2.484574@1] ---[ end trace 27d733e9dd4b6e1d ]---
  423. [ 2.484625@0] usbcore: registered new device driver usb
  424. [ 2.484758@0] pps_core: LinuxPPS API ver. 1 registered
  425. [ 2.484763@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  426. [ 2.484794@0] PTP clock support registered
  427. [ 2.489883@0] call aml_pmu_probe_init in
  428. [ 2.490208@0] get property: use_pwm, value:0x00000001, dec: 1
  429. [ 2.490217@0] get property: table_count, value:0x0000001d, dec: 29
  430. [ 2.490226@0] meson_cs_dvfs_probe, table count:29, use_pwm:1, pwm controller:2
  431. [ 2.490231@0] 0, 001c0000, 860000
  432. [ 2.490235@0] 1, 001b0001, 870000
  433. [ 2.490239@0] 2, 001a0002, 880000
  434. [ 2.490243@0] 3, 00190003, 890000
  435. [ 2.490247@0] 4, 00180004, 900000
  436. [ 2.490251@0] 5, 00170005, 910000
  437. [ 2.490255@0] 6, 00160006, 920000
  438. [ 2.490259@0] 7, 00150007, 930000
  439. [ 2.490263@0] 8, 00140008, 940000
  440. [ 2.490267@0] 9, 00130009, 950000
  441. [ 2.490271@0] 10, 0012000a, 960000
  442. [ 2.490275@0] 11, 0011000b, 970000
  443. [ 2.490279@0] 12, 0010000c, 980000
  444. [ 2.490283@0] 13, 000f000d, 990000
  445. [ 2.490287@0] 14, 000e000e, 1000000
  446. [ 2.490292@0] 15, 000d000f, 1010000
  447. [ 2.490296@0] 16, 000c0010, 1020000
  448. [ 2.490300@0] 17, 000b0011, 1030000
  449. [ 2.490304@0] 18, 000a0012, 1040000
  450. [ 2.490308@0] 19, 00090013, 1050000
  451. [ 2.490312@0] 20, 00080014, 1060000
  452. [ 2.490316@0] 21, 00070015, 1070000
  453. [ 2.490320@0] 22, 00060016, 1080000
  454. [ 2.490324@0] 23, 00050017, 1090000
  455. [ 2.490328@0] 24, 00040018, 1100000
  456. [ 2.490332@0] 25, 00030019, 1110000
  457. [ 2.490335@0] 26, 0002001a, 1120000
  458. [ 2.490340@0] 27, 0001001b, 1130000
  459. [ 2.490344@0] 28, 0000001c, 1140000
  460. [ 2.490410@0] get pin for pwm--------
  461. [ 2.490419@0] [DVFS]aml_dvfs_register_driver, driver meson-cs-dvfs regist success, mask:1, source id:1
  462. [ 2.490700@0] Advanced Linux Sound Architecture Driver Initialized.
  463. [ 2.659637@0] Switching to clocksource Timer-E
  464. [ 2.663704@0] FS-Cache: Loaded
  465. [ 2.676970@0] NET: Registered protocol family 2
  466. [ 2.678114@0] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  467. [ 2.683246@0] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  468. [ 2.689853@0] TCP: Hash tables configured (established 8192 bind 8192)
  469. [ 2.696249@0] TCP: reno registered
  470. [ 2.699534@0] UDP hash table entries: 512 (order: 2, 16384 bytes)
  471. [ 2.705649@0] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  472. [ 2.712402@0] NET: Registered protocol family 1
  473. [ 2.717014@0] RPC: Registered named UNIX socket transport module.
  474. [ 2.722645@0] RPC: Registered udp transport module.
  475. [ 2.727521@0] RPC: Registered tcp transport module.
  476. [ 2.732343@0] RPC: Registered tcp NFSv4.1 backchannel transport module.
  477. [ 2.739041@0] wifi_dev_probe
  478. [ 2.741785@0] wifi_dt : interrupt_pin=GPIOX_21
  479. [ 2.746243@0] wifi_dt : irq_num=null
  480. [ 2.749748@0] wifi_dt : irq_trigger_type=GPIO_IRQ_HIGH
  481. [ 2.754876@0] wifi_dt : power_on_pin=GPIOAO_6
  482. [ 2.759192@0] wifi_dt : power_on_pin2=GPIOX_11
  483. [ 2.763667@0] interrupt_pin=118, irq_num=4, irq_trigger_type=0, power_on_pin=6,clock_32k_pin=107
  484. [ 2.772941@0] Unpacking initramfs...
  485. [ 3.118070@0] Freeing initrd memory: 4200K
  486. [ 3.119217@0] audit: initializing netlink socket (disabled)
  487. [ 3.122142@0] type=2000 audit(3.040:1): initialized
  488. [ 3.127964@0] bounce pool size: 64 pages
  489. [ 3.140859@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  490. [ 3.141580@0] exFAT: Core Version 1.2.4
  491. [ 3.145120@0] exFAT: FS Version 1.2.4
  492. [ 3.150203@0] NFS: Registering the id_resolver key type
  493. [ 3.153975@0] Key type id_resolver registered
  494. [ 3.158224@0] Key type id_legacy registered
  495. [ 3.163091@0] NTFS driver 2.1.30 [Flags: R/O].
  496. [ 3.167433@0] fuse init (API version 7.22)
  497. [ 3.171961@0] JFS: nTxBlock = 6519, nTxLock = 52157
  498. [ 3.180335@0] SGI XFS with security attributes, large block/inode numbers, no debug enabled
  499. [ 3.186756@0] bio: create slab <bio-1> at 1
  500. [ 3.189608@0] Btrfs loaded
  501. [ 3.191165@0] msgmni has been set to 1395
  502. [ 3.194950@0] SELinux: Registering netfilter hooks
  503. [ 3.202575@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  504. [ 3.207265@0] io scheduler noop registered
  505. [ 3.211303@0] io scheduler deadline registered
  506. [ 3.215774@0] io scheduler cfq registered (default)
  507. [ 3.220586@0] io scheduler fiops registered
  508. [ 3.230012@0] loop: module loaded
  509. [ 3.230997@0] tun: Universal TUN/TAP device driver, 1.6
  510. [ 3.233209@0] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  511. [ 3.240260@0] ethernet base addr is fe0c0000
  512. [ 3.243868@0] DWMAC100
  513. [ 3.246198@0] stmmac - user ID: 0x10, Synopsys ID: 0x37
  514. [ 3.251390@0] Normal descriptors
  515. [ 3.254708@0] Ring mode enabled
  516. [ 3.257886@0] DMA HW capability register supported
  517. [ 3.262563@0] RX Checksum Offload Engine supported (type 2)
  518. [ 3.268395@0] TX Checksum insertion supported
  519. [ 3.272778@0] Wake-Up On Lan supported
  520. [ 3.276660@0] Enable RX Mitigation via HW Watchdog Timer
  521. [ 3.297735@0] libphy: stmmac: probed
  522. [ 3.297795@0] eth%d: PHY ID 02430c54 at 0 IRQ POLL (stmmac-0:00) active
  523. [ 3.302871@0] PPP generic driver version 2.4.2
  524. [ 3.306969@0] PPP BSD Compression module registered
  525. [ 3.311546@0] PPP Deflate Compression module registered
  526. [ 3.316782@0] PPP MPPE Compression module registered
  527. [ 3.321678@0] NET: Registered protocol family 24
  528. [ 3.326368@0] usbcore: registered new interface driver asix
  529. [ 3.331896@0] usbcore: registered new interface driver ax88179_178a
  530. [ 3.338128@0] usbcore: registered new interface driver cdc_ether
  531. [ 3.344093@0] usbcore: registered new interface driver dm9601
  532. [ 3.349802@0] usbcore: registered new interface driver net1080
  533. [ 3.355615@0] usbcore: registered new interface driver cdc_subset
  534. [ 3.361643@0] usbcore: registered new interface driver zaurus
  535. [ 3.367430@0] usbcore: registered new interface driver cdc_ncm
  536. [ 3.373162@0] usbcore: registered new interface driver qf9700
  537. [ 3.378908@0] usbcore: registered new interface driver sr9600
  538. [ 3.384780@0] usbcore: registered new interface driver cdc_acm
  539. [ 3.390340@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  540. [ 3.398590@0] usbcore: registered new interface driver usb-storage
  541. [ 3.405080@0] mousedev: PS/2 mouse device common for all mice
  542. [ 3.410793@0] usbcore: registered new interface driver xpad
  543. [ 3.415972@0] usbcore: registered new interface driver usb_acecad
  544. [ 3.421998@0] usbcore: registered new interface driver aiptek
  545. [ 3.427751@0] usbcore: registered new interface driver gtco
  546. [ 3.433257@0] usbcore: registered new interface driver hanwang
  547. [ 3.439090@0] usbcore: registered new interface driver kbtab
  548. [ 3.444709@0] usbcore: registered new interface driver wacom
  549. [ 3.450423@0] i2c /dev entries driver
  550. [ 3.455139@0] device-mapper: uevent: version 1.0.3
  551. [ 3.459052@0] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: [email protected]
  552. [ 3.468115@0] hidraw: raw HID events driver (C) Jiri Kosina
  553. [ 3.473113@0] usbcore: registered new interface driver usbhid
  554. [ 3.478516@0] usbhid: USB HID core driver
  555. [ 3.483125@0] zram: Created 1 device(s) ...
  556. [ 3.487208@0] ashmem: initialized
  557. [ 3.490135@0] logger: created 256K log 'log_main'
  558. [ 3.494834@0] logger: created 256K log 'log_events'
  559. [ 3.499660@0] logger: created 256K log 'log_radio'
  560. [ 3.504444@0] logger: created 256K log 'log_system'
  561. [ 3.509080@0] vout_init_module
  562. [ 3.512153@0] start init vout module
  563. [ 3.515718@0] create vout attribute ok
  564. [ 3.519590@0] ge2d_init
  565. [ 3.521876@0] ge2d_dev major:244
  566. [ 3.525354@0] ge2d start monitor
  567. [ 3.528395@0] osd_init
  568. [ 3.528412@1] ge2d workqueue monitor start
  569. [ 3.534771@0] mode is 15,sync_duration_den=1,sync_duration_num=60
  570. [ 3.540748@0] request vpu clk holdings: vencp 159375000Hz
  571. [ 3.546141@0] TV mode 1080p selected.
  572. [ 3.549755@0] already display in uboot
  573. [ 3.553494@0] vinfo mode is: 1080p
  574. [ 3.556907@0] osd_probe, vinfo:c085c9bc
  575. [ 3.561111@0] Frame buffer memory assigned at phy:0x06100000, vir:0xf1000000, size=24576K
  576. [ 3.568832@0] osd_probe, mydef_var:c0b6d538, vinfo:c085c9bc
  577. [ 3.574367@0] init fbdev bpp is :32
  578. [ 3.577812@0] ---------------clear framebuffer0 memory
  579. [ 3.654073@0] Console: switching to colour frame buffer device 240x67
  580. [ 3.709644@0] Frame buffer memory assigned at phy:0x07900000, vir:0xf0a00000, size=1024K
  581. [ 3.712370@0] osd_probe, mydef_var:c0b6d538, vinfo:c085c9bc
  582. [ 3.717937@0] ---------------clear framebuffer1 memory
  583. [ 3.742792@0] osd probe ok
  584. [ 3.743082@0] enter aml_sysled_init
  585. [ 3.744103@0] DI: di_init
  586. [ 3.746086@0] DI: di_probe
  587. [ 3.749250@0] aml_wdt_driver_init,306
  588. [ 3.752353@0] ** disable watchdog
  589. [ 3.755986@0] keys===========================================
  590. [ 3.761373@0] keys_devno=f100000
  591. [ 3.764824@0] securitykey: device aml_keys created
  592. [ 3.769341@0] amlkeys=0
  593. [ 3.771800@0] platform_driver_register--aml_keys_driver--------------------
  594. [ 3.779171@0] set uart_ao pinmux use pinctrl subsystem
  595. [ 3.783877@0] P_AO_RTI_PIN_MUX_REG:78005861
  596. [ 3.787968@0] start uart_ao_ttyS0:(irq = 122)
  597. [ 3.792271@0] register uart_ao ok
  598. [ 3.795941@0] start uart_a_ttyS1:(irq = 58)
  599. [ 3.799717@0] register uart_a ok
  600. [ 3.803228@0] set uart_b pinmux use pinctrl subsystem
  601. [ 3.808018@0] P_AO_RTI_PIN_MUX_REG:78005861
  602. [ 3.812131@0] start uart_b_ttyS2:(irq = 107)
  603. [ 3.816403@0] register uart_b ok
  604. [ 3.819840@0] start uart_d_ttyS4:(irq = 126)
  605. [ 3.823859@0] register uart_d ok
  606. [ 3.827170@0] dwc_otg: version 3.10a 12-MAY-2014
  607. [ 3.831613@0] dwc_otg_driver_probe NOT match
  608. [ 3.835944@0] usb1: type: 1, speed: 0, config: 0, dma: 0, id: 1, phy: fe108820, ctrl: fe080000
  609. [ 3.844483@0] USB (1) use clock source: XTAL input
  610. [ 3.870335@0] Core Release: 3.10a
  611. [ 3.870491@0] Setting default values for core params
  612. [ 3.878499@0] curmode: 1, host_only: 1
  613. [ 3.906589@0] Using Buffer DMA mode
  614. [ 3.914399@0] OTG VER PARAM: 1, OTG VER FLAG: 1
  615. [ 3.922169@0] Working on port type = HOST
  616. [ 3.930012@0] dwc_otg lm1: DWC OTG Controller
  617. [ 3.937868@0] dwc_otg lm1: new USB bus registered, assigned bus number 1
  618. [ 3.946862@0] dwc_otg lm1: irq 63, io mem 0x00000000
  619. [ 3.954830@0] -------hcd->flags.d32 = 0
  620. [ 3.962820@0] Init: Port Power? op_state=1
  621. [ 3.970881@0] Init1: Power Port (0)
  622. [ 3.979016@0] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  623. [ 3.988545@0] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  624. [ 3.998577@0] usb usb1: Product: DWC OTG Controller
  625. [ 4.006877@0] usb usb1: Manufacturer: Linux 3.10.108 dwc_otg_hcd
  626. [ 4.015625@0] usb usb1: SerialNumber: lm1
  627. [ 4.024605@0] hub 1-0:1.0: USB hub found
  628. [ 4.033038@0] hub 1-0:1.0: 1 port detected
  629. [ 4.041692@0] usb0: type: 1, speed: 0, config: 0, dma: 0, id: 0, phy: fe108800, ctrl: fe040000
  630. [ 4.053290@0] USB (0) use clock source: XTAL input
  631. [ 4.082993@0] Core Release: 3.10a
  632. [ 4.091502@0] Setting default values for core params
  633. [ 4.100114@0] curmode: 1, host_only: 1
  634. [ 4.128927@0] Using Buffer DMA mode
  635. [ 4.137540@0] OTG VER PARAM: 1, OTG VER FLAG: 1
  636. [ 4.146084@0] Working on port type = HOST
  637. [ 4.154532@0] dwc_otg lm0: DWC OTG Controller
  638. [ 4.162890@0] dwc_otg lm0: new USB bus registered, assigned bus number 2
  639. [ 4.172376@0] dwc_otg lm0: irq 62, io mem 0x00000000
  640. [ 4.180770@0] -------hcd->flags.d32 = 0
  641. [ 4.189074@0] Init: Port Power? op_state=1
  642. [ 4.197253@0] Init1: Power Port (0)
  643. [ 4.205378@0] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  644. [ 4.214853@0] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  645. [ 4.224770@0] usb usb2: Product: DWC OTG Controller
  646. [ 4.232955@0] usb usb2: Manufacturer: Linux 3.10.108 dwc_otg_hcd
  647. [ 4.241601@0] usb usb2: SerialNumber: lm0
  648. [ 4.241644@2] Indeed it is in host mode hprt0 = 00021501
  649. [ 4.258905@0] hub 2-0:1.0: USB hub found
  650. [ 4.267404@0] hub 2-0:1.0: 1 port detected
  651. [ 4.276187@0] boot_device_flag : -1
  652. [ 4.284495@0] do not init nand
  653. [ 4.293907@0] amvideocap_init_module
  654. [ 4.302251@0] Amlogic A/V streaming port init
  655. [ 4.312176@0] buffersize=262144,0,start=0
  656. [ 4.320281@0] Subtitle stbuf alloced at 0xee680000, size = 262144
  657. [ 4.328876@0] changed the (2) buffer size from 0 to 262144
  658. [ 4.337349@0] init vdec memsource 37f00000->3befffff
  659. [ 4.345784@0] [tsync_pcr_init]init success.
  660. [ 4.354100@0] regist mpeg12 codec profile
  661. [ 4.362371@0] regist mpeg4 codec profile
  662. [ 4.370536@0] amvdec_vc1 module init
  663. [ 4.378760@0] regist vc1 codec profile
  664. [ 4.386848@0] amvdec_h264 module init
  665. [ 4.395053@0] regist h264 codec profile
  666. [ 4.403068@0] amvdec_h264mvc module init
  667. [ 4.411191@0] regist hmvc codec profile
  668. [ 4.413440@2] usb 1-1: new high-speed USB device number 2 using dwc_otg
  669. [ 4.413596@3] Indeed it is in host mode hprt0 = 00001101
  670. [ 4.436284@0] amvdec_h265 module init
  671. [ 4.444328@0] regist hevc codec profile
  672. [ 4.452297@0] regist mjpeg codec profile
  673. [ 4.460208@0] amvdec_real module init
  674. [ 4.468134@0] regist real codec profile
  675. [ 4.475969@0] amvdec_avs module init
  676. [ 4.483985@0] amvenc_avc memory resource undefined.
  677. [ 4.491793@0] amvenc_avc memory is invaild, probe fail!
  678. [ 4.499643@0] amvenc_avc: probe of amvenc_avc.0 failed with error -14
  679. [ 4.508409@0] jpegenc module init
  680. [ 4.516645@0] picdec buffer size is 4000000
  681. [ 4.524678@0] alloc_keep_buffer keep_y_addr ee200000
  682. [ 4.532550@0] alloc_keep_buffer keep_u_addr ee700000
  683. [ 4.540375@0] alloc_keep_buffer keep_v_addr ee800000
  684. [ 4.548039@0] yaddr=ee200000,u_addr=ee700000,v_addr=ee800000
  685. [ 4.556165@0] create_ge2d_work_queue video task ok
  686. [ 4.564487@0] efuse===========================================
  687. [ 4.572526@0] efuse: device efuse created
  688. [ 4.580292@0] efuse--------------------------------------------
  689. [ 4.588311@0] SARADC Driver init.
  690. [ 4.596291@0] __saradc_probe__
  691. [ 4.614482@3] usb 1-1: New USB device found, idVendor=054c, idProduct=05b9
  692. [ 4.623305@3] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  693. [ 4.632602@3] usb 1-1: Product: Storage Media
  694. [ 4.640210@3] usb 1-1: Manufacturer: Sony
  695. [ 4.647759@3] usb 1-1: SerialNumber: 2C5001504090002100
  696. [ 4.656081@3] usb-storage 1-1:1.0: USB Mass Storage device detected
  697. [ 4.664619@3] scsi0 : usb-storage 1-1:1.0
  698. [ 4.672794@3] Indeed it is in host mode hprt0 = 00021501
  699. [ 4.753529@0] saradc calibration: ref_val = 509
  700. [ 4.761299@0] saradc calibration: ref_nominal = 512
  701. [ 4.768998@0] saradc calibration: coef = 4096
  702. [ 4.776999@0] ir irblaster probe
  703. [ 4.784891@0] Remote Driver
  704. [ 4.792498@0] Remote platform_data g_remote_base=fe600580
  705. [ 4.800144@0] set drvdata completed
  706. [ 4.807673@0] device_create_file completed
  707. [ 4.815797@0] input: aml_keypad as /devices/platform/meson-remote/input/input0
  708. [ 4.825345@0] input_register_device completed
  709. [ 4.832999@0] [0xffffff00] = 0x1dd0190
  710. [ 4.840553@0] [0xffffff04] = 0xf800ca
  711. [ 4.848016@0] [0xffffff08] = 0x82006e
  712. [ 4.853440@3] usb 2-1: new high-speed USB device number 2 using dwc_otg
  713. [ 4.853949@3] Indeed it is in host mode hprt0 = 00001101
  714. [ 4.871488@0] [0xffffff0c] = 0x3c0030
  715. [ 4.879150@0] [0xffffff10] = 0x30fa0013
  716. [ 4.886733@0] [0xffffff18] = 0x6f19000
  717. [ 4.894270@0] [0xffffff1c] = 0xbe40
  718. [ 4.901636@0] [0x0] = 0xfa00a0
  719. [ 4.908935@0] [0x4] = 0xfa00a0
  720. [ 4.916126@0] [0x8] = 0xfa00a0
  721. [ 4.923167@0] [0xc] = 0x640030
  722. [ 4.930189@0] [0x10] = 0x30fa0013
  723. [ 4.937207@0] [0x18] = 0x961b800
  724. [ 4.944187@0] [0x1c] = 0x9740
  725. [ 4.951076@0] [0x20] = 0x104
  726. [ 4.957948@0] [0x24] = 0x0
  727. [ 4.964784@0] [0x28] = 0x0
  728. [ 4.971480@0] set_remote_mode[69]
  729. [ 4.978299@0] remote config major:236
  730. [ 4.985198@0] physical address:0x2e8f6000
  731. [ 4.991875@0] Meson KeyInput init
  732. [ 4.998645@0] GPIO Keypad Driver init.
  733. [ 5.005343@0] ==gpio_key_probe==
  734. [ 5.011947@0] reg:2620,clearmask=400040,setmask=1
  735. [ 5.018538@0] reg:2622,clearmask=ff0000,set pin=3
  736. [ 5.025153@0] reg:2623,clearmask=7000000,setmask=7
  737. [ 5.031840@0] reg:2620,clearmask=800080,setmask=10001
  738. [ 5.038458@0] reg:2622,clearmask=ff000000,set pin=3
  739. [ 5.045091@0] reg:2623,clearmask=70000000,setmask=7
  740. [ 5.045954@3] usb 2-1: New USB device found, idVendor=8564, idProduct=4100
  741. [ 5.045965@3] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  742. [ 5.045972@3] usb 2-1: Product: USB2.0 Hub
  743. [ 5.045980@3] usb 2-1: Manufacturer: Transcend Info
  744. [ 5.046776@3] hub 2-1:1.0: USB hub found
  745. [ 5.047226@3] hub 2-1:1.0: 4 ports detected
  746. [ 5.094565@0] power key(116) registed.
  747. [ 5.101411@0] input: gpio_keypad as /devices/platform/gpio_keypad.6/input/input1
  748. [ 5.110200@0] gpio keypad register input device completed.
  749. [ 5.117089@0] gpio keypad major:235
  750. [ 5.124087@0] spi_nor_init
  751. [ 5.130896@0] amlogic_spi_nor_probe:
  752. [ 5.137594@0] amlogic_spi->state_name:default
  753. [ 5.144342@0] AMLOGIC_SPI_NOR cc000000.spi: master is unqueued, this is deprecated
  754. [ 5.153066@0] check_storage_device : spi boot_device_flag : -1
  755. [ 5.159986@0] spi_nor_probe
  756. [ 5.166675@0] spi_nor_probe 629 boot_device_flag -1 : do not init spi
  757. [ 5.174294@0] spi_nor: probe of apollospi:32766 failed with error -12
  758. [ 5.181878@0] amlogic_spi_nor_probe over
  759. [ 5.188785@0] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
  760. [ 5.199872@0] host->base fe108c20
  761. [ 5.206908@0] pdata->caps 7
  762. [ 5.213906@0] pdata->caps2 0
  763. [ 5.220776@0] get property: port, value:0x00000001
  764. [ 5.228718@0] get property: ocr_avail, value:0x00200000
  765. [ 5.236634@0] get property: f_min, value:0x000493e0
  766. [ 5.244517@0] get property: f_max, value:0x02faf080
  767. [ 5.252250@0] get property: f_max_w, value:0x02faf080
  768. [ 5.259983@0] get property: max_req_size, value:0x00020000
  769. [ 5.267570@0] get property: irq_in, value:0x00000003
  770. [ 5.275040@0] get property: irq_out, value:0x00000005
  771. [ 5.282446@0] get property: gpio_cd, str:CARD_6
  772. [ 5.289363@0] get property: pinname, str:sd
  773. [ 5.295983@0] get property: jtag_pin, str:CARD_0
  774. [ 5.302764@0] get property: card_type, value:0x00000005
  775. [ 5.310061@0] get property: gpio_dat3, str:CARD_4
  776. [ 5.323852@3] usb 2-1.2: new full-speed USB device number 3 using dwc_otg
  777. [ 5.353507@0] reg:2620,clearmask=80008,setmask=10001
  778. [ 5.360068@0] reg:2621,clearmask=ff000000,set pin=49
  779. [ 5.366683@0] reg:2623,clearmask=7000,setmask=7
  780. [ 5.373434@0] reg:2620,clearmask=200020,setmask=1
  781. [ 5.380151@0] reg:2622,clearmask=ff00,set pin=49
  782. [ 5.386938@0] reg:2623,clearmask=700000,setmask=7
  783. [ 5.460694@1] pdata->caps 10f
  784. [ 5.467578@1] pdata->caps2 0
  785. [ 5.474448@1] get property: port, value:0x00000000
  786. [ 5.482316@1] get property: ocr_avail, value:0x00200000
  787. [ 5.490230@1] get property: f_min, value:0x000493e0
  788. [ 5.498176@1] get property: f_max, value:0x02faf080
  789. [ 5.506138@1] get property: max_req_size, value:0x00020000
  790. [ 5.514107@1] get property: pinname, str:sdio
  791. [ 5.521328@1] get property: card_type, value:0x00000003
  792. [ 5.653413@2] [aml_sdio_probe] aml_sdio_probe() success!
  793. [ 5.674787@2] host->base fe108e00
  794. [ 5.682022@2] pdata->caps 80000547
  795. [ 5.689202@2] pdata->caps2 0
  796. [ 5.696225@2] get property: port, value:0x00000005
  797. [ 5.704228@2] get property: ocr_avail, value:0x00200000
  798. [ 5.712202@2] get property: f_min, value:0x000493e0
  799. [ 5.720153@2] get property: f_max, value:0x02faf080
  800. [ 5.728032@2] get property: max_req_size, value:0x00020000
  801. [ 5.735940@2] get property: pinname, str:emmc
  802. [ 5.743026@2] get property: card_type, value:0x00000001
  803. [ 5.750810@2] get property: gpio_dat3, str:BOOT_3
  804. [ 5.757981@2] [is_emmc_exist] host->storage_flag=0, POR_BOOT_VALUE=1
  805. [ 5.762151@3] scsi 0:0:0:0: Direct-Access Sony Storage Media 1.00 PQ: 0 ANSI: 6
  806. [ 5.813449@2] emmc: mmc_rescan_try_freq: trying to init card at 400000 Hz
  807. [ 5.821772@2] aml_emmc_hw_reset 1338
  808. [ 5.836959@2] mmc_init_card
  809. [ 5.876605@2] emmc: BKOPS_EN bit is not set
  810. [ 5.883627@2] [aml_sdhc_probe] aml_sdhc_probe() success!
  811. [ 5.892208@2] [dsp]DSP start addr 0xc5e00000
  812. [ 5.899365@2] [dsp]register dsp to char divece(257)
  813. [ 5.906930@2] Activate high speed
  814. [ 5.914291@1] amlogic audio spdif interface device init!
  815. [ 5.915370@2] emmc: new high speed MMC card at address 0001, clock 47222222, 8-bit-bus-width
  816. [ 5.931555@2] mmcblk0: emmc:0001 SEM04G 3.68 GiB
  817. [ 5.931622@1] device name=nand_key open error
  818. [ 5.931630@1] aml_keys: version 0 can not be init c0b71778
  819. [ 5.931634@1] device name=emmc_key open error
  820. [ 5.931638@1] aml_keys: version 0 can not be init c0b71778
  821. [ 5.932509@1] aml_rtc rtc.0: rtc core: registered aml_rtc as rtc0
  822. [ 5.933891@1] [AML1216]call aml1216_battery_init, ret = 0
  823. [ 5.933965@1] [AML1218]call aml1218_battery_init, ret = 0
  824. [ 5.934033@1] [RN5T618]call rn5t618_battery_init, ret = 0
  825. [ 5.935221@1] amaudio2: device amaudio2 created
  826. [ 5.935394@1] Amlogic CEC Driver, (c) 2016 Gerald Dachs, Version: 0.0.1
  827. [ 5.935660@1] Error: Didn't get power valid value --- wifi_power_probe 323
  828. [ 5.935672@1] wifi_power power_gpio is 6
  829. [ 5.935680@1] wifi_power power_gpio2 is 108
  830. [ 5.935956@1] bcmdhd_wlan_init()
  831. [ 5.935972@1] 1 bcmdhd_init_wlan_mem: wlan_static_skb[0]=ef2d5300, size=3760
  832. [ 5.935980@1] 1 bcmdhd_init_wlan_mem: wlan_static_skb[1]=ef2d53c0, size=3760
  833. [ 5.935988@1] 1 bcmdhd_init_wlan_mem: wlan_static_skb[2]=ef2d5480, size=3760
  834. [ 5.935995@1] 1 bcmdhd_init_wlan_mem: wlan_static_skb[3]=ef2d5540, size=3760
  835. [ 5.936002@1] 1 bcmdhd_init_wlan_mem: wlan_static_skb[4]=ef2d5600, size=3760
  836. [ 5.936010@1] 1 bcmdhd_init_wlan_mem: wlan_static_skb[5]=ef2d56c0, size=3760
  837. [ 5.936017@1] 1 bcmdhd_init_wlan_mem: wlan_static_skb[6]=ef2d5780, size=3760
  838. [ 5.936024@1] 1 bcmdhd_init_wlan_mem: wlan_static_skb[7]=ef2d5840, size=3760
  839. [ 5.936041@1] 2 bcmdhd_init_wlan_mem: wlan_static_skb[8]=ef2d5900, size=7856
  840. [ 5.936048@1] 2 bcmdhd_init_wlan_mem: wlan_static_skb[9]=ef2d59c0, size=7856
  841. [ 5.936055@1] 2 bcmdhd_init_wlan_mem: wlan_static_skb[10]=ef2d5a80, size=7856
  842. [ 5.936061@1] 2 bcmdhd_init_wlan_mem: wlan_static_skb[11]=ef2d5b40, size=7856
  843. [ 5.936072@1] 2 bcmdhd_init_wlan_mem: wlan_static_skb[12]=ef2d5c00, size=7856
  844. [ 5.936079@1] 2 bcmdhd_init_wlan_mem: wlan_static_skb[13]=ef2d5cc0, size=7856
  845. [ 5.936086@1] 2 bcmdhd_init_wlan_mem: wlan_static_skb[14]=ef2d5d80, size=7856
  846. [ 5.936092@1] 2 bcmdhd_init_wlan_mem: wlan_static_skb[15]=ef2d5e40, size=7856
  847. [ 5.936102@1] 3 bcmdhd_init_wlan_mem: wlan_static_skb[16]=ef2d5f00, size=16048
  848. [ 5.936110@1] 4 bcmdhd_init_wlan_mem: wlan_mem_array[0]=ef2d5300, size=20504
  849. [ 5.936118@1] 4 bcmdhd_init_wlan_mem: wlan_mem_array[1]=ef2d53c0, size=20504
  850. [ 5.936127@1] 4 bcmdhd_init_wlan_mem: wlan_mem_array[2]=ef2d5480, size=81944
  851. [ 5.936140@1] 4 bcmdhd_init_wlan_mem: wlan_mem_array[3]=ef2d5540, size=163864
  852. [ 5.936148@1] 4 bcmdhd_init_wlan_mem: wlan_mem_array[4]=ef2d5600, size=20504
  853. [ 5.936155@1] 5 bcmdhd_init_wlan_mem: wlan_static_scan_buf0=ee8f0000, size=65536
  854. [ 5.936164@1] 6 bcmdhd_init_wlan_mem: wlan_static_scan_buf1=ee9a0000, size=65536
  855. [ 5.936167@1] bcmdhd_init_wlan_mem: WIFI MEM Allocated
  856. [ 5.936170@1] amlogic rfkill init
  857. [ 5.936178@1] Error: Driver 'bt-dev' is already registered, aborting...
  858. [ 5.937346@1] aml_aes aml_aes: Aml AES
  859. [ 5.938055@1] aml_tdes aml_tdes: Aml TDES
  860. [ 5.938778@1] enter rt5616_modinit
  861. [ 5.938966@1] dummy_codec_platform_probe
  862. [ 5.939193@1] == ES8323 == es8323_modinit()
  863. [ 5.939319@1] *****enter pcm2bt_codec_probe
  864. [ 5.939329@1] pcm2bt_codec_probe ok!
  865. [ 5.939999@1] enter aml_i2s_dai_probe
  866. [ 5.940005@1] i2s get no clk src setting in dts, use the default mpll 0
  867. [ 5.940017@1] [aml-i2s-dai]enterd aml_i2s_dai_probe,old_samplerate:0,sample_rate=48000
  868. [ 5.940205@1] enter aml_pcm_dai_probe
  869. [ 5.940285@1] [aml-spdif-dai]enter aml_dai_spdif_init
  870. [ 5.940292@1] [aml-spdif-dai]enterd aml_spdif_play,set_clock:-1,sample_rate=4
  871. [ 5.940296@1] audio_set_958_clk, freq=4,
  872. [ 5.940305@1] IEC958 16bit
  873. [ 5.940311@1] hdmitx: audio: aout notify rate 48000
  874. [ 5.940315@1] hdmitx: audio: aout notify size 16
  875. [ 5.940319@1] hdmitx: audio: aout notify format CT_PCM
  876. [ 5.940325@1] hdmitx: audio: audio channel num is 1
  877. [ 5.940333@1] hdmitx: audio: SPDIF
  878. [ 5.940346@1] hdmitx: audio: current VIC: 16
  879. [ 5.940349@1] hdmitx: audio: audio sample rate: 3
  880. [ 5.940352@1] hdmitx: audio: reset audio N para
  881. [ 5.940364@1] hdmitx: audio: PCM out to HDMI
  882. [ 5.940368@1] hdmitx: audio: i2s_to_spdif_flag:1
  883. [ 5.940371@1] hdmitx: audio: Enable audio spdif to HDMI
  884. [ 5.940377@1] hdmitx: audio: Audio Type: PCM
  885. [ 5.940434@1] hdmitx: audio: set audio param
  886. [ 5.940525@1] [aml-spdif-dai]aml_spdif_probe
  887. [ 5.940711@1] test codec rt5616
  888. [ 5.940717@1] test_codec_of_node, node rt5616 disable
  889. [ 5.940721@1] test codec rt5631
  890. [ 5.940725@1] test_codec_of_node, node rt5631 disable
  891. [ 5.940729@1] test codec wm8960
  892. [ 5.940733@1] test_codec_of_node, node wm8960 disable
  893. [ 5.940737@1] test codec dummy_codec
  894. [ 5.940742@1] using external codec, index = 4
  895. [ 5.940745@1] using external dummy codec
  896. [ 5.940903@1] enter spdif_dit_probe
  897. [ 5.940905@1] aml_spdif_unmute
  898. [ 5.941117@1] codec_name = dummy_codec.0
  899. [ 5.942085@1] enter aml_asoc_init
  900. [ 5.942126@1] p_aml_audio->hp_disable=1
  901. [ 5.942132@1] falied to get spk event delay time paraments from dts file
  902. [ 5.942136@1] spk_event delay_time = 0
  903. [ 5.944225@1] aml-i2s 0:playback preallocate_dma_buffer: area=f0b01000, addr=2e200000, size=524288
  904. [ 5.944531@1] aml-i2s 1:capture preallocate_dma_buffer: area=f09b2000, addr=2e160000, size=65536
  905. [ 5.944570@1] aml_snd_m8 aml_m8_sound_card.4: dummy_codec <-> aml-i2s-dai.0 mapping ok
  906. [ 5.946861@1] enter aml_pcm2bt_preallocate_dma_buffer stream: 0
  907. [ 5.946992@1] aml_pcm2bt_preallocate_dma_buffer allcoate buf->area: f09d3000 buf->addr: 0x2e150000 buf->bytes: 65536
  908. [ 5.946996@1] enter aml_pcm2bt_preallocate_dma_buffer stream: 1
  909. [ 5.947125@1] aml_pcm2bt_preallocate_dma_buffer allcoate buf->area: f09e4000 buf->addr: 0x2e180000 buf->bytes: 65536
  910. [ 5.947136@1] aml_snd_m8 aml_m8_sound_card.4: pcm2bt-pcm <-> aml-pcm-dai.0 mapping ok
  911. [ 5.948425@1] aml-i2s 0:playback preallocate_dma_buffer: area=f0b83000, addr=2e300000, size=524288
  912. [ 5.948712@1] aml-i2s 1:capture preallocate_dma_buffer: area=f0c05000, addr=2e2a0000, size=65536
  913. [ 5.948748@1] aml_snd_m8 aml_m8_sound_card.4: dit-hifi <-> aml-spdif-dai.0 mapping ok
  914. [ 5.957049@1] -----ext_codec=1---
  915. [ 5.957076@1] =aml_m8_pinmux_init==,aml_m8_pinmux_init done,---0
  916. [ 5.957319@1] GACT probability NOT on
  917. [ 5.957328@1] Mirror/redirect action on
  918. [ 5.957333@1] u32 classifier
  919. [ 5.957336@1] Actions configured
  920. [ 5.957343@1] Netfilter messages via NETLINK v0.30.
  921. [ 5.957417@1] nf_conntrack version 0.5.0 (13039 buckets, 52156 max)
  922. [ 5.959895@1] ctnetlink v0.93: registering with nfnetlink.
  923. [ 5.959997@1] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  924. [ 5.960000@1] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  925. [ 5.960402@1] xt_time: kernel timezone is -0000
  926. [ 5.960542@1] ipip: IPv4 over IPv4 tunneling driver
  927. [ 5.961342@1] ip_tables: (C) 2000-2006 Netfilter Core Team
  928. [ 5.961577@1] arp_tables: (C) 2002 David S. Miller
  929. [ 5.961644@1] TCP: cubic registered
  930. [ 5.961647@1] Initializing XFRM netlink socket
  931. [ 5.969662@1] NET: Registered protocol family 10
  932. [ 5.973691@1] mip6: Mobile IPv6
  933. [ 5.973739@1] ip6_tables: (C) 2000-2006 Netfilter Core Team
  934. [ 5.974081@1] sit: IPv6 over IPv4 tunneling driver
  935. [ 5.975350@1] NET: Registered protocol family 17
  936. [ 5.975394@1] NET: Registered protocol family 15
  937. [ 5.975506@1] Bridge firewalling registered
  938. [ 5.975642@1] l2tp_core: L2TP core driver, V2.0
  939. [ 5.975646@1] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
  940. [ 5.975675@1] l2tp_netlink: L2TP netlink interface
  941. [ 5.975712@1] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
  942. [ 5.975758@1] l2tp_debugfs: L2TP debugfs support
  943. [ 5.975761@1] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
  944. [ 5.975821@1] NET: Registered protocol family 35
  945. [ 5.975937@1] Key type dns_resolver registered
  946. [ 6.035951@0] sd 0:0:0:0: [sda] 61603840 512-byte logical blocks: (31.5 GB/29.3 GiB)
  947. [ 6.036579@0] sd 0:0:0:0: [sda] Write Protect is off
  948. [ 6.036591@0] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
  949. [ 6.037780@0] sd 0:0:0:0: [sda] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
  950. [ 6.077470@0] sda: sda1 sda2
  951. [ 6.082812@0] sd 0:0:0:0: [sda] Attached SCSI removable disk
  952. [ 6.980744@0] VFP support v0.3: [ 6.981116@2] mmcblk0boot0: emmc:0001 SEM04G partition 1 2.00 MiB
  953. [ 6.981382@2] mmcblk0boot1: emmc:0001 SEM04G partition 2 2.00 MiB
  954. [ 6.982587@2] mmcblk0: p1
  955. [ 6.983149@2] Delete invalid mbr partition part ef5b5e00, part->partno 1
  956. [ 6.983619@2] emmc read lba=0x12000, blocks=0x1 OK!
  957. [ 6.983881@2] emmc read lba=0x12001, blocks=0x1 OK!
  958. [ 6.983889@2] [mmc_read_partition_tbl] mmc read partition OK!
  959. [ 6.983892@2] add_emmc_partition
  960. [ 6.984128@2] [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000
  961. [ 6.984345@2] [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000
  962. [ 6.984548@2] [mmcblk0p03] cache offset 0x000006c00000, size 0x000020000000
  963. [ 6.984746@2] [mmcblk0p04] env offset 0x000027400000, size 0x000000800000
  964. [ 6.984952@2] [mmcblk0p05] logo offset 0x000028400000, size 0x000002000000
  965. [ 6.985148@2] [mmcblk0p06] recovery offset 0x00002ac00000, size 0x000002000000
  966. [ 6.985350@2] [mmcblk0p07] misc offset 0x00002d400000, size 0x000002000000
  967. [ 6.985548@2] [mmcblk0p08] boot offset 0x00002fc00000, size 0x000002000000
  968. [ 6.985751@2] [mmcblk0p09] system offset 0x000032400000, size 0x000040000000
  969. [ 6.985948@2] [mmcblk0p10] data offset 0x000072c00000, size 0x000079400000
  970. [ 6.985991@2] card key: card_blk_probe.
  971. [ 6.986000@2] emmc_key_init:428 emmc key lba_start:0x12020,lba_end:0x12220
  972. [ 6.986005@2] i=0,register --- emmc_key
  973. [ 6.986010@2] emmc key: emmc_key_init:450 ok.
  974. [ 6.986051@2] Exit aml_emmc_partition_ops OK.
  975. [ 6.987015@2] mmcblk0boot1: p1
  976. [ 6.987046@2] mmcblk0boot1: p1 start 16065 is beyond EOD, truncated
  977. [ 6.988295@2] mmcblk0boot0: p1
  978. [ 6.988321@2] mmcblk0boot0: p1 start 16065 is beyond EOD, truncated
  979.  
  980. [ 7.274239@1] implementor 41 architecture 2 part 30 variant 5 rev 1
  981. [ 7.291797@1] Registering SWP/SWPB emulation handler
  982. [ 7.300469@1] enter meson_pm_init
  983. [ 7.309257@1] enter meson_pm_probe!
  984. [ 7.317723@1] meson_pm_probe done !
  985. [ 7.326091@1] pm-meson: probe of aml_pm_m8 failed with error -1
  986. [ 7.335671@1] regulator-dummy: disabling
  987. [ 7.344399@2] ERROR::usb_gadget_probe_driver:1377: usb_gadget_register_driver ENODEV
  988. [ 7.344399@2]
  989. [ 7.365118@2] init: failed to probe driver -19
  990. [ 7.369852@2] aml_rtc rtc.0: setting system clock to 2018-12-11 12:11:59 UTC (1544530319)
  991. [ 7.389446@2] ### dt-test ### No testcase data in device tree; not running tests
  992. [ 7.400189@2] meson_cpufreq: no voltage_control prop
  993. [ 7.409063@2] voltage_control = 0
  994. [ 7.419177@2] buf[0]=35,buf[1]=b0,err=4
  995. [ 7.423888@2] adc=385,TS_C=21,flag=1
  996. [ 7.428532@2] efuse_flag=a
  997. [ 7.433135@2] amlogic_thermal_probe, this chip is trimmed, use thermal
  998. [ 7.438766@2] amlogic-thermal aml_thermal: amlogic thermal probe start
  999. [ 7.445257@2] #thermal-cells=7
  1000. [ 7.450000@2] pdata->temp_trip_count=4
  1001. [ 7.454750@2] temperature=70000 on trip point=0
  1002. [ 7.459494@2] fixing high_freq=1488001 to 1488000 at trip point 0,level=0
  1003. [ 7.466989@2] fixing low_freq=1488001 to 1488000 at trip point 0,level=0
  1004. [ 7.473670@2] gpu[0].gpu_high_freq=511,tmp_level[0].gpu_high_freq=511
  1005. [ 7.479259@2] cpu[0] core num==3
  1006. [ 7.484023@2] gpu[0] core num==2
  1007. [ 7.488734@2] temperature=80000 on trip point=1
  1008. [ 7.493424@2] fixing high_freq=1200001 to 1200000 at trip point 1,level=3
  1009. [ 7.500823@2] fixing low_freq=1200001 to 1200000 at trip point 1,level=3
  1010. [ 7.507542@2] gpu[1].gpu_high_freq=435,tmp_level[1].gpu_high_freq=435
  1011. [ 7.513056@2] cpu[1] core num==2
  1012. [ 7.517700@2] gpu[1] core num==2
  1013. [ 7.522270@2] temperature=90000 on trip point=2
  1014. [ 7.526800@2] fixing high_freq=800001 to 696000 at trip point 2,level=8
  1015. [ 7.533911@2] fixing low_freq=800001 to 696000 at trip point 2,level=8
  1016. [ 7.540393@2] gpu[2].gpu_high_freq=328,tmp_level[2].gpu_high_freq=328
  1017. [ 7.545682@2] cpu[2] core num==1
  1018. [ 7.550124@2] gpu[2] core num==1
  1019. [ 7.554577@2] temperature=260000 on trip point=3
  1020. [ 7.559043@2] fixing high_freq=-1 to -22 at trip point 3,level=-1
  1021. [ 7.565898@2] fixing low_freq=-1 to -22 at trip point 3,level=-1
  1022. [ 7.571824@2] gpu[3].gpu_high_freq=-1,tmp_level[3].gpu_high_freq=-1
  1023. [ 7.576952@2] cpu[3] core num==-1
  1024. [ 7.581469@2] gpu[3] core num==-1
  1025. [ 7.585981@2] idle interval=1000
  1026. [ 7.590496@2] pdata->name:aml_thermal
  1027. [ 7.595280@2] tmp_trip[0].cpu_core_upper=1
  1028. [ 7.599878@2] tmp_trip[1].cpu_core_upper=2
  1029. [ 7.604472@2] tmp_trip[2].cpu_core_upper=3
  1030. [ 7.609039@2] tmp_trip[3].cpu_core_upper=-1
  1031. [ 7.613604@2] aml_thermal bind thermal-cpucore-0 okay !
  1032. [ 7.618161@2] aml_thermal bind thermal-cpufreq-0 okay !
  1033. [ 7.623000@2] amlogic: Kernel Thermal management registered
  1034. [ 7.628432@2] amlogic-thermal aml_thermal: amlogic thermal probe done
  1035. [ 7.634954@2] ALSA device list:
  1036. [ 7.639401@2] #0: AML-M8AUDIO
  1037. [ 7.644259@2] Freeing unused kernel memory: 228K
  1038. [ 10.403668@3] usb 2-1.2: device descriptor read/64, error -110
  1039. [ 15.593689@3] usb 2-1.2: device descriptor read/64, error -110
  1040. [ 15.784985@3] usb 2-1.2: new full-speed USB device number 4 using dwc_otg
  1041. [ 21.003692@3] usb 2-1.2: device descriptor read/64, error -110
  1042. [ 26.203787@3] usb 2-1.2: device descriptor read/64, error -110
  1043. [ 26.405174@3] usb 2-1.2: new full-speed USB device number 5 using dwc_otg
  1044. [ 36.933755@2] usb 2-1.2: device not accepting address 5, error -110
  1045. [ 37.084754@3] usb 2-1.2: new full-speed USB device number 6 using dwc_otg
  1046. [ 47.643812@0] usb 2-1.2: device not accepting address 6, error -110
  1047. [ 47.713077@3] hub 2-1:1.0: unable to enumerate USB device on port 2
  1048. [ 47.865012@3] usb 2-1.4: new low-speed USB device number 7 using dwc_otg
  1049. [ 48.045645@3] usb 2-1.4: New USB device found, idVendor=1a2c, idProduct=2124
  1050. [ 48.114201@3] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  1051. [ 48.182594@3] usb 2-1.4: Product: USB Keyboard
  1052. [ 48.217443@3] usb 2-1.4: Manufacturer: SEM
  1053. [ 48.225543@3] input: SEM USB Keyboard as /devices/lm0/usb2/2-1/2-1.4/2-1.4:1.0/input/input2
  1054. [ 48.232951@3] hid-generic 0003:1A2C:2124.0001: input,hidraw0: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-lm0-1.4/input0
  1055. [ 48.247779@3] input: SEM USB Keyboard as /devices/lm0/usb2/2-1/2-1.4/2-1.4:1.1/input/input3
  1056. [ 48.255434@3] hid-generic 0003:1A2C:2124.0002: input,hidraw1: USB HID v1.10 Device [SEM USB Keyboard] on usb-lm0-1.4/input1
  1057. [ 50.911747@2] force enable DISCARD here for ext4 fs
  1058. [ 51.278461@2] checked enable EXT4 DISCARD here
  1059. [ 51.354672@2] EXT4-fs (sda2): mounting with "discard" option, but the device does not support discard
  1060. [ 51.420090@2] EXT4-fs (sda2): mounted filesystem with writeback data mode. Opts: data=writeback
  1061. [ 52.226755@2] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
  1062. [ 52.325026@2] systemd[1]: Detected architecture arm.
  1063. [ 52.354404@2] systemd[1]: Set hostname to <vegas805>.
  1064. [ 52.503505@0] Changing uart_ao_ttyS0: baud from 0 to 115200
  1065. [ 54.689322@1] systemd[1]: Created slice System Slice.
  1066. [ 54.701314@1] systemd[1]: Listening on Journal Socket.
  1067. [ 54.712980@1] systemd[1]: Reached target Remote File Systems (Pre).
  1068. [ 54.730938@1] systemd[1]: Reached target User and Group Name Lookups.
  1069. [ 54.749109@1] systemd[1]: Listening on Syslog Socket.
  1070. [ 54.766698@1] systemd[1]: Listening on udev Control Socket.
  1071. [ 54.784432@1] systemd[1]: Reached target Remote File Systems.
  1072. [ 54.803055@1] systemd[1]: Created slice system-serial\x2dgetty.slice.
  1073. [ 54.820713@1] systemd[1]: Reached target Swap.
  1074. [ 54.833707@1] systemd[1]: Listening on fsck to fsckd communication Socket.
  1075. [ 54.849985@1] systemd[1]: Starting Set console keymap...
  1076. [ 54.905730@1] systemd[1]: Starting Restore / save the current clock...
  1077. [ 54.927397@2] systemd[1]: Starting Nameserver information manager...
  1078. [ 54.955493@2] systemd[1]: Starting Load Kernel Modules...
  1079. [ 54.982736@2] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  1080. [ 55.008960@2] systemd[1]: Created slice system-systemd\x2dfsck.slice.
  1081. [ 55.026480@2] systemd[1]: Listening on udev Kernel Socket.
  1082. [ 55.042428@2] systemd[1]: Created slice User and Session Slice.
  1083. [ 55.046745@1] aml_nftl_dev: module license 'Proprietary' taints kernel.
  1084. [ 55.047544@1] boot_device_flag : -1
  1085. [ 55.071269@2] systemd[1]: Reached target Slices.
  1086. [ 55.086505@2] systemd[1]: Mounting Debug File System...
  1087. [ 55.100625@2] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  1088. [ 55.115730@2] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  1089. [ 55.131381@2] systemd[1]: Started Trigger resolvconf update for networkd DNS.
  1090. [ 55.147034@2] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  1091. [ 55.167313@2] systemd[1]: Listening on Journal Socket (/dev/log).
  1092. [ 55.181490@2] systemd[1]: Reached target Encrypted Volumes.
  1093. [ 55.197291@2] systemd[1]: Starting Remount Root and Kernel File Systems...
  1094. [ 55.216505@2] systemd[1]: Mounted Debug File System.
  1095. [ 55.230688@2] systemd[1]: Started Set console keymap.
  1096. [ 55.245302@2] systemd[1]: Started Restore / save the current clock.
  1097. [ 55.262280@2] systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
  1098. [ 55.274224@2] systemd[1]: Failed to start Load Kernel Modules.
  1099. [ 55.295203@2] systemd[1]: systemd-modules-load.service: Unit entered failed state.
  1100. [ 55.303929@2] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
  1101. [ 55.313866@2] systemd[1]: Started Create list of required static device nodes for the current kernel.
  1102. [ 55.428765@2] systemd[1]: Started Nameserver information manager.
  1103. [ 55.473031@2] systemd[1]: Reached target Network (Pre).
  1104. [ 55.489217@2] systemd[1]: Starting Create Static Device Nodes in /dev...
  1105. [ 55.506576@2] systemd[1]: Mounting FUSE Control File System...
  1106. [ 55.523512@2] systemd[1]: Mounting Configuration File System...
  1107. [ 55.540457@2] systemd[1]: Starting Apply Kernel Variables...
  1108. [ 55.560713@2] systemd[1]: Mounted FUSE Control File System.
  1109. [ 55.574836@2] systemd[1]: Mounted Configuration File System.
  1110.  
  1111. Ubuntu 16.04.5 LTS vegas805 ttyS0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!