API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jul 18th, 2017
126
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.27 KB | None | 0 0
raw download clone embed print report
  1. smartctl 5.42 2011-10-20 r3458 [i686-linux-2.6.32.12-0.7.1.xs6.0.2.611.170703xen] (local build)
  2. Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Device Model: SAMSUNG HE103SJ
  6. Serial Number: S2JBJ9FB800268
  7. LU WWN Device Id: 5 0024e9 205e8527d
  8. Firmware Version: 1AJ10001
  9. User Capacity: 1,000,204,886,016 bytes [1.00 TB]
  10. Sector Size: 512 bytes logical/physical
  11. Device is: Not in smartctl database [for details use: -P showall]
  12. ATA Version is: 8
  13. ATA Standard is: ATA-8-ACS revision 6
  14. Local Time is: Tue Jul 18 09:20:45 2017 CEST
  15. SMART support is: Available - device has SMART capability.
  16. SMART support is: Enabled
  17.  
  18. === START OF READ SMART DATA SECTION ===
  19. SMART overall-health self-assessment test result: PASSED
  20.  
  21. General SMART Values:
  22. Offline data collection status: (0x00) Offline data collection activity
  23. was never started.
  24. Auto Offline Data Collection: Disabled.
  25. Self-test execution status: ( 41) The self-test routine was interrupted
  26. by the host with a hard or soft reset.
  27. Total time to complete Offline
  28. data collection: ( 9240) seconds.
  29. Offline data collection
  30. capabilities: (0x5b) SMART execute Offline immediate.
  31. Auto Offline data collection on/off support.
  32. Suspend Offline collection upon new
  33. command.
  34. Offline surface scan supported.
  35. Self-test supported.
  36. No Conveyance Self-test supported.
  37. Selective Self-test supported.
  38. SMART capabilities: (0x0003) Saves SMART data before entering
  39. power-saving mode.
  40. Supports SMART auto save timer.
  41. Error logging capability: (0x01) Error logging supported.
  42. General Purpose Logging supported.
  43. Short self-test routine
  44. recommended polling time: ( 2) minutes.
  45. Extended self-test routine
  46. recommended polling time: ( 154) minutes.
  47. SCT capabilities: (0x003f) SCT Status supported.
  48. SCT Error Recovery Control supported.
  49. SCT Feature Control supported.
  50. SCT Data Table supported.
  51.  
  52. SMART Attributes Data Structure revision number: 16
  53. Vendor Specific SMART Attributes with Thresholds:
  54. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  55. 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 105
  56. 2 Throughput_Performance 0x0026 056 056 000 Old_age Always - 8419
  57. 3 Spin_Up_Time 0x0023 071 070 025 Pre-fail Always - 8807
  58. 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 11
  59. 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
  60. 7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
  61. 8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
  62. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 27651
  63. 10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
  64. 11 Calibration_Retry_Count 0x0032 252 252 000 Old_age Always - 0
  65. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 15
  66. 191 G-Sense_Error_Rate 0x0022 252 252 000 Old_age Always - 0
  67. 192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
  68. 194 Temperature_Celsius 0x0002 061 050 000 Old_age Always - 39 (Min/Max 22/50)
  69. 195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
  70. 196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
  71. 197 Current_Pending_Sector 0x0032 252 100 000 Old_age Always - 0
  72. 198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
  73. 199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 86
  74. 200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 579
  75. 223 Load_Retry_Count 0x0032 252 252 000 Old_age Always - 0
  76. 225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 15
  77.  
  78. SMART Error Log Version: 1
  79. ATA Error Count: 6 (device log contains only the most recent five errors)
  80. CR = Command Register [HEX]
  81. FR = Features Register [HEX]
  82. SC = Sector Count Register [HEX]
  83. SN = Sector Number Register [HEX]
  84. CL = Cylinder Low Register [HEX]
  85. CH = Cylinder High Register [HEX]
  86. DH = Device/Head Register [HEX]
  87. DC = Device Command Register [HEX]
  88. ER = Error register [HEX]
  89. ST = Status register [HEX]
  90. Powered_Up_Time is measured from power on, and printed as
  91. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  92. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  93.  
  94. Error 6 occurred at disk power-on lifetime: 26649 hours (1110 days + 9 hours)
  95. When the command that caused the error occurred, the device was active or idle.
  96.  
  97. After command completion occurred, registers were:
  98. ER ST SC SN CL CH DH
  99. -- -- -- -- -- -- --
  100. 40 51 3e 81 49 a8 e4 Error: UNC 62 sectors at LBA = 0x04a84981 = 78137729
  101.  
  102. Commands leading to the command that caused the error were:
  103. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  104. -- -- -- -- -- -- -- -- ---------------- --------------------
  105. c8 00 80 3f 49 a8 e4 0a 00:00:00.000 READ DMA
  106. 27 00 00 00 00 00 e0 0a 00:00:00.000 READ NATIVE MAX ADDRESS EXT
  107. ec 00 00 00 00 00 a0 0a 00:00:00.000 IDENTIFY DEVICE
  108. ef 03 46 00 00 00 a0 0a 00:00:00.000 SET FEATURES [Set transfer mode]
  109. 27 00 00 00 00 00 e0 0a 00:00:00.000 READ NATIVE MAX ADDRESS EXT
  110.  
  111. Error 5 occurred at disk power-on lifetime: 26649 hours (1110 days + 9 hours)
  112. When the command that caused the error occurred, the device was active or idle.
  113.  
  114. After command completion occurred, registers were:
  115. ER ST SC SN CL CH DH
  116. -- -- -- -- -- -- --
  117. 40 51 3e 81 49 a8 e4 Error: UNC 62 sectors at LBA = 0x04a84981 = 78137729
  118.  
  119. Commands leading to the command that caused the error were:
  120. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  121. -- -- -- -- -- -- -- -- ---------------- --------------------
  122. c8 00 80 3f 49 a8 e4 0a 00:00:00.000 READ DMA
  123. 27 00 00 00 00 00 e0 0a 00:00:00.000 READ NATIVE MAX ADDRESS EXT
  124. ec 00 00 00 00 00 a0 0a 00:00:00.000 IDENTIFY DEVICE
  125. ef 03 46 00 00 00 a0 0a 00:00:00.000 SET FEATURES [Set transfer mode]
  126. 27 00 00 00 00 00 e0 0a 00:00:00.000 READ NATIVE MAX ADDRESS EXT
  127.  
  128. Error 4 occurred at disk power-on lifetime: 26649 hours (1110 days + 9 hours)
  129. When the command that caused the error occurred, the device was active or idle.
  130.  
  131. After command completion occurred, registers were:
  132. ER ST SC SN CL CH DH
  133. -- -- -- -- -- -- --
  134. 40 51 3e 81 49 a8 e4 Error: UNC 62 sectors at LBA = 0x04a84981 = 78137729
  135.  
  136. Commands leading to the command that caused the error were:
  137. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  138. -- -- -- -- -- -- -- -- ---------------- --------------------
  139. c8 00 80 3f 49 a8 e4 0a 00:00:00.000 READ DMA
  140. 27 00 00 00 00 00 e0 0a 00:00:00.000 READ NATIVE MAX ADDRESS EXT
  141. ec 00 00 00 00 00 a0 0a 00:00:00.000 IDENTIFY DEVICE
  142. ef 03 46 00 00 00 a0 0a 00:00:00.000 SET FEATURES [Set transfer mode]
  143. 27 00 00 00 00 00 e0 0a 00:00:00.000 READ NATIVE MAX ADDRESS EXT
  144.  
  145. Error 3 occurred at disk power-on lifetime: 26649 hours (1110 days + 9 hours)
  146. When the command that caused the error occurred, the device was active or idle.
  147.  
  148. After command completion occurred, registers were:
  149. ER ST SC SN CL CH DH
  150. -- -- -- -- -- -- --
  151. 40 51 3e 81 49 a8 e4 Error: UNC 62 sectors at LBA = 0x04a84981 = 78137729
  152.  
  153. Commands leading to the command that caused the error were:
  154. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  155. -- -- -- -- -- -- -- -- ---------------- --------------------
  156. c8 00 80 3f 49 a8 e4 0a 00:00:00.000 READ DMA
  157. 27 00 00 00 00 00 e0 0a 00:00:00.000 READ NATIVE MAX ADDRESS EXT
  158. ec 00 00 00 00 00 a0 0a 00:00:00.000 IDENTIFY DEVICE
  159. ef 03 46 00 00 00 a0 0a 00:00:00.000 SET FEATURES [Set transfer mode]
  160. 27 00 00 00 00 00 e0 0a 00:00:00.000 READ NATIVE MAX ADDRESS EXT
  161.  
  162. Error 2 occurred at disk power-on lifetime: 26649 hours (1110 days + 9 hours)
  163. When the command that caused the error occurred, the device was active or idle.
  164.  
  165. After command completion occurred, registers were:
  166. ER ST SC SN CL CH DH
  167. -- -- -- -- -- -- --
  168. 40 51 3e 81 49 a8 e4 Error: UNC 62 sectors at LBA = 0x04a84981 = 78137729
  169.  
  170. Commands leading to the command that caused the error were:
  171. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  172. -- -- -- -- -- -- -- -- ---------------- --------------------
  173. c8 00 80 3f 49 a8 e4 0a 00:00:00.000 READ DMA
  174. 27 00 00 00 00 00 e0 0a 00:00:00.000 READ NATIVE MAX ADDRESS EXT
  175. ec 00 00 00 00 00 a0 0a 00:00:00.000 IDENTIFY DEVICE
  176. ef 03 46 00 00 00 a0 0a 00:00:00.000 SET FEATURES [Set transfer mode]
  177. 27 00 00 00 00 00 e0 0a 00:00:00.000 READ NATIVE MAX ADDRESS EXT
  178.  
  179. SMART Self-test log structure revision number 1
  180. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  181. # 1 Extended offline Interrupted (host reset) 90% 26649 -
  182. # 2 Extended offline Aborted by host 90% 26649 -
  183. # 3 Extended offline Aborted by host 90% 26649 -
  184. # 4 Extended offline Completed without error 00% 14718 -
  185.  
  186. Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
  187. SMART Selective self-test log data structure revision number 0
  188. Note: revision number not 1 implies that no selective self-test has ever been run
  189. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  190. 1 0 0 Interrupted [90% left] (0-65535)
  191. 2 0 0 Not_testing
  192. 3 0 0 Not_testing
  193. 4 0 0 Not_testing
  194. 5 0 0 Not_testing
  195. Selective self-test flags (0x0):
  196. After scanning selected spans, do NOT read-scan remainder of disk.
  197. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!