rakotomandimby

Untitled

Aug 16th, 2013
179
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.83 KB | None | 0 0
  1. root@rescue:~# smartctl -a -d ata /dev/sdb
  2. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.8.13-xxxx-std-ipv6-64] (local build)
  3. Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family: Seagate Barracuda 7200.11
  7. Device Model: ST31500341AS
  8. Serial Number: 9VS4EJ6W
  9. LU WWN Device Id: 5 000c50 0273e35ba
  10. Firmware Version: CC1H
  11. User Capacity: 1,500,301,910,016 bytes [1.50 TB]
  12. Sector Size: 512 bytes logical/physical
  13. Device is: In smartctl database [for details use: -P show]
  14. ATA Version is: 8
  15. ATA Standard is: ATA-8-ACS revision 4
  16. Local Time is: Fri Aug 16 11:02:47 2013 CEST
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19.  
  20. === START OF READ SMART DATA SECTION ===
  21. SMART overall-health self-assessment test result: FAILED!
  22. Drive failure expected in less than 24 hours. SAVE ALL DATA.
  23. See vendor-specific Attribute list for failed Attributes.
  24.  
  25. General SMART Values:
  26. Offline data collection status: (0x82) Offline data collection activity
  27. was completed without error.
  28. Auto Offline Data Collection: Enabled.
  29. Self-test execution status: ( 0) The previous self-test routine completed
  30. without error or no self-test has ever
  31. been run.
  32. Total time to complete Offline
  33. data collection: ( 617) seconds.
  34. Offline data collection
  35. capabilities: (0x7b) SMART execute Offline immediate.
  36. Auto Offline data collection on/off support.
  37. Suspend Offline collection upon new
  38. command.
  39. Offline surface scan supported.
  40. Self-test supported.
  41. Conveyance Self-test supported.
  42. Selective Self-test supported.
  43. SMART capabilities: (0x0003) Saves SMART data before entering
  44. power-saving mode.
  45. Supports SMART auto save timer.
  46. Error logging capability: (0x01) Error logging supported.
  47. General Purpose Logging supported.
  48. Short self-test routine
  49. recommended polling time: ( 1) minutes.
  50. Extended self-test routine
  51. recommended polling time: ( 255) minutes.
  52. Conveyance self-test routine
  53. recommended polling time: ( 2) minutes.
  54. SCT capabilities: (0x103f) SCT Status supported.
  55. SCT Error Recovery Control supported.
  56. SCT Feature Control supported.
  57. SCT Data Table supported.
  58.  
  59. SMART Attributes Data Structure revision number: 10
  60. Vendor Specific SMART Attributes with Thresholds:
  61. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  62. 1 Raw_Read_Error_Rate 0x000f 117 086 006 Pre-fail Always - 154268106
  63. 3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0
  64. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 20
  65. 5 Reallocated_Sector_Ct 0x0033 001 001 036 Pre-fail Always FAILING_NOW 4095
  66. 7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 530982111
  67. 9 Power_On_Hours 0x0032 073 073 000 Old_age Always - 24489
  68. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  69. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 20
  70. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  71. 187 Reported_Uncorrect 0x0032 096 096 000 Old_age Always - 4
  72. 188 Command_Timeout 0x0032 100 098 000 Old_age Always - 65538
  73. 189 High_Fly_Writes 0x003a 001 001 000 Old_age Always - 207
  74. 190 Airflow_Temperature_Cel 0x0022 057 047 045 Old_age Always - 43 (Min/Max 31/43)
  75. 194 Temperature_Celsius 0x0022 043 053 000 Old_age Always - 43 (0 21 0 0)
  76. 195 Hardware_ECC_Recovered 0x001a 048 024 000 Old_age Always - 154268106
  77. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  78. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  79. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  80. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 137821205585833
  81. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2129139859
  82. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 640302941
  83.  
  84. SMART Error Log Version: 1
  85. ATA Error Count: 15 (device log contains only the most recent five errors)
  86. CR = Command Register [HEX]
  87. FR = Features Register [HEX]
  88. SC = Sector Count Register [HEX]
  89. SN = Sector Number Register [HEX]
  90. CL = Cylinder Low Register [HEX]
  91. CH = Cylinder High Register [HEX]
  92. DH = Device/Head Register [HEX]
  93. DC = Device Command Register [HEX]
  94. ER = Error register [HEX]
  95. ST = Status register [HEX]
  96. Powered_Up_Time is measured from power on, and printed as
  97. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  98. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  99.  
  100. Error 15 occurred at disk power-on lifetime: 24481 hours (1020 days + 1 hours)
  101. When the command that caused the error occurred, the device was active or idle.
  102.  
  103. After command completion occurred, registers were:
  104. ER ST SC SN CL CH DH
  105. -- -- -- -- -- -- --
  106. 04 71 04 9d 00 32 e0 Device Fault; Error: ABRT
  107.  
  108. Commands leading to the command that caused the error were:
  109. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  110. -- -- -- -- -- -- -- -- ---------------- --------------------
  111. a1 00 00 00 00 00 a0 00 20d+18:22:10.195 IDENTIFY PACKET DEVICE
  112. ec 00 00 00 00 00 a0 00 20d+18:22:10.194 IDENTIFY DEVICE
  113. ff 00 00 00 00 00 00 00 20d+18:22:09.882 [VENDOR SPECIFIC]
  114. 00 00 00 00 00 00 00 ff 20d+18:22:09.882 NOP [Abort queued commands]
  115. ff 00 00 00 00 00 00 00 20d+18:22:07.976 [VENDOR SPECIFIC]
  116.  
  117. Error 14 occurred at disk power-on lifetime: 24481 hours (1020 days + 1 hours)
  118. When the command that caused the error occurred, the device was active or idle.
  119.  
  120. After command completion occurred, registers were:
  121. ER ST SC SN CL CH DH
  122. -- -- -- -- -- -- --
  123. 04 71 04 9d 00 32 e0
  124.  
  125. Commands leading to the command that caused the error were:
  126. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  127. -- -- -- -- -- -- -- -- ---------------- --------------------
  128. ec 00 00 00 00 00 a0 00 20d+18:22:10.194 IDENTIFY DEVICE
  129. ff 00 00 00 00 00 00 00 20d+18:22:09.882 [VENDOR SPECIFIC]
  130. 00 00 00 00 00 00 00 ff 20d+18:22:09.882 NOP [Abort queued commands]
  131. ff 00 00 00 00 00 00 00 20d+18:22:07.976 [VENDOR SPECIFIC]
  132. 00 00 00 00 00 00 00 ff 20d+18:22:07.976 NOP [Abort queued commands]
  133.  
  134. Error 13 occurred at disk power-on lifetime: 24481 hours (1020 days + 1 hours)
  135. When the command that caused the error occurred, the device was active or idle.
  136.  
  137. After command completion occurred, registers were:
  138. ER ST SC SN CL CH DH
  139. -- -- -- -- -- -- --
  140. 04 71 04 9d 00 32 e0
  141.  
  142. Commands leading to the command that caused the error were:
  143. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  144. -- -- -- -- -- -- -- -- ---------------- --------------------
  145. ec 00 01 00 00 00 a0 00 20d+18:21:34.751 IDENTIFY DEVICE
  146. ff 00 00 00 00 00 00 00 20d+18:21:34.712 [VENDOR SPECIFIC]
  147. 00 00 00 00 00 00 00 ff 20d+18:21:34.712 NOP [Abort queued commands]
  148. ff 00 00 00 00 00 00 00 20d+18:21:29.223 [VENDOR SPECIFIC]
  149. 00 00 00 00 00 00 00 ff 20d+18:21:29.222 NOP [Abort queued commands]
  150.  
  151. Error 12 occurred at disk power-on lifetime: 24481 hours (1020 days + 1 hours)
  152. When the command that caused the error occurred, the device was active or idle.
  153.  
  154. After command completion occurred, registers were:
  155. ER ST SC SN CL CH DH
  156. -- -- -- -- -- -- --
  157. 04 71 04 9d 00 32 e0 Device Fault; Error: ABRT
  158.  
  159. Commands leading to the command that caused the error were:
  160. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  161. -- -- -- -- -- -- -- -- ---------------- --------------------
  162. a1 00 00 00 00 00 a0 00 20d+18:20:53.802 IDENTIFY PACKET DEVICE
  163. ec 00 00 00 00 00 a0 00 20d+18:20:53.802 IDENTIFY DEVICE
  164. ff 00 00 00 00 00 00 00 20d+18:20:53.489 [VENDOR SPECIFIC]
  165. 00 00 00 00 00 00 00 ff 20d+18:20:53.489 NOP [Abort queued commands]
  166. ff 00 00 00 00 00 00 00 20d+18:20:51.591 [VENDOR SPECIFIC]
  167.  
  168. Error 11 occurred at disk power-on lifetime: 24481 hours (1020 days + 1 hours)
  169. When the command that caused the error occurred, the device was active or idle.
  170.  
  171. After command completion occurred, registers were:
  172. ER ST SC SN CL CH DH
  173. -- -- -- -- -- -- --
  174. 04 71 04 9d 00 32 e0
  175.  
  176. Commands leading to the command that caused the error were:
  177. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  178. -- -- -- -- -- -- -- -- ---------------- --------------------
  179. ec 00 00 00 00 00 a0 00 20d+18:20:53.802 IDENTIFY DEVICE
  180. ff 00 00 00 00 00 00 00 20d+18:20:53.489 [VENDOR SPECIFIC]
  181. 00 00 00 00 00 00 00 ff 20d+18:20:53.489 NOP [Abort queued commands]
  182. ff 00 00 00 00 00 00 00 20d+18:20:51.591 [VENDOR SPECIFIC]
  183. 00 00 00 00 00 00 00 ff 20d+18:20:51.591 NOP [Abort queued commands]
  184.  
  185. SMART Self-test log structure revision number 1
  186. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  187. # 1 Short offline Completed without error 00% 64 -
  188.  
  189. SMART Selective self-test log data structure revision number 1
  190. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  191. 1 0 0 Not_testing
  192. 2 0 0 Not_testing
  193. 3 0 0 Not_testing
  194. 4 0 0 Not_testing
  195. 5 0 0 Not_testing
  196. Selective self-test flags (0x0):
  197. After scanning selected spans, do NOT read-scan remainder of disk.
  198. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment