Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Linux version 2.6.29-rc3 (root@mue-s-ai) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 Mon Feb 2 08:42:37 CET 2009
- KERNEL supported cpus:
- Intel GenuineIntel
- AMD AuthenticAMD
- NSC Geode by NSC
- Cyrix CyrixInstead
- Centaur CentaurHauls
- Transmeta GenuineTMx86
- Transmeta TransmetaCPU
- UMC UMC UMC UMC
- BIOS-provided physical RAM map:
- BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
- BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
- BIOS-e820: 00000000000e9000 - 0000000000100000 (reserved)
- BIOS-e820: 0000000000100000 - 000000000f740000 (usable)
- BIOS-e820: 000000000f740000 - 000000000f750000 (ACPI data)
- BIOS-e820: 000000000f750000 - 000000000f800000 (ACPI NVS)
- DMI 2.3 present.
- AMI BIOS detected: BIOS may corrupt low RAM, working it around.
- last_pfn = 0xf740 max_arch_pfn = 0x100000
- kernel direct mapping tables up to f740000 @ 10000-15000
- ACPI: RSDP 000F8DF0, 0014 (r0 ACPIAM)
- ACPI: RSDT 0F740000, 0030 (r1 A M I OEMRSDT 7000413 MSFT 97)
- ACPI: FACP 0F740200, 0081 (r2 A M I OEMFACP 7000413 MSFT 97)
- ACPI Warning (tbfadt-0412): Invalid length for PmTimerBlock: 24, using default 32 [20081204]
- FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
- ACPI: DSDT 0F740360, 6781 (r1 0ABBD 0ABBD001 1 MSFT 100000E)
- ACPI: FACS 0F750000, 0040
- ACPI: APIC 0F740300, 0054 (r1 A M I OEMAPIC 7000413 MSFT 97)
- ACPI: OEMB 0F750040, 004D (r1 A M I OEMBIOS 7000413 MSFT 97)
- 247MB LOWMEM available.
- mapped low ram: 0 - 0f740000
- low ram: 00000000 - 0f740000
- bootmap 00011000 - 00012ee8
- (6 early reservations) ==> bootmem [0000000000 - 000f740000]
- #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- #1 [0000100000 - 0000722de8] TEXT DATA BSS ==> [0000100000 - 0000722de8]
- #2 [0000723000 - 0000726000] INIT_PG_TABLE ==> [0000723000 - 0000726000]
- #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
- #4 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
- #5 [0000011000 - 0000013000] BOOTMAP ==> [0000011000 - 0000013000]
- Zone PFN ranges:
- DMA 0x00000010 -> 0x00001000
- Normal 0x00001000 -> 0x0000f740
- Movable zone start PFN for each node
- early_node_map[2] active PFN ranges
- 0: 0x00000010 -> 0x0000009f
- 0: 0x00000100 -> 0x0000f740
- On node 0 totalpages: 63183
- free_area_init_node: node 0, pgdat c06843c0, node_mem_map c1000200
- DMA zone: 32 pages used for memmap
- DMA zone: 0 pages reserved
- DMA zone: 3951 pages, LIFO batch:0
- Normal zone: 463 pages used for memmap
- Normal zone: 58737 pages, LIFO batch:15
- ACPI: PM-Timer IO Port: 0xe408
- Allocating PCI resources starting at 10000000 (gap: f800000:f0800000)
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 62688
- Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.29-rc3 root=/dev/sda5 ro vga=894 hpet=force raid=noautodetect usbcore.autosuspend=1
- Enabling fast FPU save and restore... done.
- Enabling unmasked SIMD FPU exception support... done.
- Initializing CPU#0
- PID hash table entries: 1024 (order: 10, 4096 bytes)
- TSC: PIT calibration matches PMTIMER. 1 loops
- Detected 1000.043 MHz processor.
- Console: colour dummy device 80x25
- console [tty0] enabled
- Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
- Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
- Memory: 243984k/253184k available (3969k kernel code, 8504k reserved, 1719k data, 256k init, 0k highmem)
- virtual kernel memory layout:
- fixmap : 0xfffed000 - 0xfffff000 ( 72 kB)
- vmalloc : 0xcff40000 - 0xfffeb000 ( 768 MB)
- lowmem : 0xc0000000 - 0xcf740000 ( 247 MB)
- .init : 0xc0692000 - 0xc06d2000 ( 256 kB)
- .data : 0xc04e0452 - 0xc068e258 (1719 kB)
- .text : 0xc0100000 - 0xc04e0452 (3969 kB)
- Checking if this processor honours the WP bit even in supervisor mode...Ok.
- Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.08 BogoMIPS (lpj=1000043)
- Mount-cache hash table entries: 512
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 1024K
- Intel machine check architecture supported.
- Intel machine check reporting enabled on CPU#0.
- CPU: Intel(R) Pentium(R) M processor 1000MHz stepping 05
- Checking 'hlt' instruction... OK.
- Freeing SMP alternatives: 0k freed
- ACPI: Core revision 20081204
- ACPI: setting ELCR to 0200 (from 00b8)
- net_namespace: 444 bytes
- NET: Registered protocol family 16
- ACPI: bus type pci registered
- PCI: Using configuration type 1 for base access
- bio: create slab <bio-0> at 0
- ACPI: EC: Look up EC in DSDT
- ACPI: Interpreter enabled
- ACPI: (supports S0 S1 S3 S5)
- ACPI: Using PIC for interrupt routing
- ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
- ACPI: EC: driver started in poll mode
- ACPI: No dock devices found.
- ACPI: PCI Root Bridge [PCI0] (0000:00)
- pci 0000:00:02.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff]
- pci 0000:00:02.0: reg 14 32bit mmio: [0xfeb00000-0xfeb7ffff]
- pci 0000:00:02.0: reg 18 io port: [0xdc00-0xdc07]
- pci 0000:00:02.0: supports D1
- pci 0000:00:02.1: reg 10 32bit mmio: [0xe8000000-0xefffffff]
- pci 0000:00:02.1: reg 14 32bit mmio: [0xfea80000-0xfeafffff]
- pci 0000:00:02.1: supports D1
- pci 0000:00:1d.0: reg 20 io port: [0xd480-0xd49f]
- pci 0000:00:1d.1: reg 20 io port: [0xd800-0xd81f]
- pci 0000:00:1d.2: reg 20 io port: [0xd880-0xd89f]
- pci 0000:00:1d.7: reg 10 32bit mmio: [0xfebff800-0xfebffbff]
- pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- pci 0000:00:1d.7: PME# disabled
- pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
- pci 0000:00:1f.0: quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO
- pci 0000:00:1f.0: quirk: region ec00-ec3f claimed by ICH4 GPIO
- pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
- pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
- pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
- pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
- pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
- pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
- pci 0000:00:1f.5: reg 10 io port: [0xe000-0xe0ff]
- pci 0000:00:1f.5: reg 14 io port: [0xe100-0xe13f]
- pci 0000:00:1f.5: reg 18 32bit mmio: [0x000000-0x0001ff]
- pci 0000:00:1f.5: reg 1c 32bit mmio: [0x000000-0x0000ff]
- pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
- pci 0000:00:1f.5: PME# disabled
- pci 0000:00:1f.6: reg 10 io port: [0xe200-0xe2ff]
- pci 0000:00:1f.6: reg 14 io port: [0xe300-0xe37f]
- pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
- pci 0000:00:1f.6: PME# disabled
- pci 0000:01:03.0: reg 10 32bit mmio: [0x000000-0x000fff]
- pci 0000:01:03.0: supports D1 D2
- pci 0000:01:03.0: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0000:01:03.0: PME# disabled
- pci 0000:01:03.1: reg 10 32bit mmio: [0x000000-0x000fff]
- pci 0000:01:03.1: supports D1 D2
- pci 0000:01:03.1: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0000:01:03.1: PME# disabled
- pci 0000:01:03.2: reg 10 32bit mmio: [0xfe8ff000-0xfe8ff7ff]
- pci 0000:01:03.2: PME# supported from D0 D3hot D3cold
- pci 0000:01:03.2: PME# disabled
- pci 0000:01:04.0: reg 10 io port: [0xc800-0xc8ff]
- pci 0000:01:04.0: reg 14 32bit mmio: [0xfe8ff800-0xfe8ff8ff]
- pci 0000:01:04.0: supports D1 D2
- pci 0000:01:04.0: PME# supported from D1 D2 D3hot D3cold
- pci 0000:01:04.0: PME# disabled
- pci 0000:01:05.0: reg 10 32bit mmio: [0xfe8fe000-0xfe8fefff]
- pci 0000:01:05.0: PME# supported from D0 D3hot D3cold
- pci 0000:01:05.0: PME# disabled
- pci 0000:00:1e.0: transparent bridge
- pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
- pci 0000:00:1e.0: bridge 32bit mmio: [0xfe700000-0xfe8fffff]
- pci 0000:00:1e.0: bridge 32bit mmio pref: [0xde500000-0xde6fffff]
- pci_bus 0000:00: on NUMA node 0
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
- ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 11 12)
- ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 12) *0, disabled.
- ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 12)
- ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 12)
- ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 12)
- ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled.
- ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 12)
- ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 12)
- ACPI: Power Resource [GFAN] (off)
- SCSI subsystem initialized
- libata version 3.00 loaded.
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- PCI: Using ACPI for IRQ routing
- Bluetooth: Core ver 2.14
- NET: Registered protocol family 31
- Bluetooth: HCI device and connection manager initialized
- Bluetooth: HCI socket layer initialized
- cfg80211: Using static regulatory domain info
- cfg80211: Regulatory domain: US
- (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
- (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
- cfg80211: Calling CRDA for country: US
- hpet clockevent registered
- hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- hpet0: 3 comparators, 64-bit 14.318180 MHz counter
- pnp: PnP ACPI init
- ACPI: bus type pnp registered
- pnp: PnP ACPI: found 12 devices
- ACPI: ACPI bus type pnp unregistered
- system 00:07: ioport range 0x4d0-0x4d1 has been reserved
- system 00:07: ioport range 0xe400-0xe47f has been reserved
- system 00:07: ioport range 0xec00-0xec3f has been reserved
- system 00:08: iomem range 0xfec00000-0xfecfffff has been reserved
- system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
- system 00:09: iomem range 0xffb80000-0xffbfffff has been reserved
- system 00:09: iomem range 0xfff80000-0xffffffff has been reserved
- system 00:0a: iomem range 0xffc00000-0xfff7ffff has been reserved
- system 00:0b: iomem range 0x0-0x9ffff could not be reserved
- system 00:0b: iomem range 0xc0000-0xcffff could not be reserved
- system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
- system 00:0b: iomem range 0x100000-0xf7fffff could not be reserved
- pci 0000:01:03.0: CardBus bridge, secondary bus 0000:02
- pci 0000:01:03.0: IO window: 0x00c000-0x00c0ff
- pci 0000:01:03.0: IO window: 0x00c400-0x00c4ff
- pci 0000:01:03.0: PREFETCH window: 0x14000000-0x17ffffff
- pci 0000:01:03.0: MEM window: 0x18000000-0x1bffffff
- pci 0000:01:03.1: CardBus bridge, secondary bus 0000:06
- pci 0000:01:03.1: IO window: 0x00cc00-0x00ccff
- pci 0000:01:03.1: IO window: 0x001000-0x0010ff
- pci 0000:01:03.1: PREFETCH window: 0x1c000000-0x1fffffff
- pci 0000:01:03.1: MEM window: 0x20000000-0x23ffffff
- pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
- pci 0000:00:1e.0: IO window: 0xc000-0xcfff
- pci 0000:00:1e.0: MEM window: 0xfe700000-0xfe8fffff
- pci 0000:00:1e.0: PREFETCH window: 0x000000de500000-0x000000de6fffff
- pci 0000:00:1e.0: setting latency timer to 64
- ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5
- PCI: setting IRQ 5 as level-triggered
- pci 0000:01:03.0: PCI INT A -> Link[LNKE] -> GSI 5 (level, low) -> IRQ 5
- ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 7
- PCI: setting IRQ 7 as level-triggered
- pci 0000:01:03.1: PCI INT B -> Link[LNKF] -> GSI 7 (level, low) -> IRQ 7
- pci 0000:01:03.1: setting latency timer to 64
- pci_bus 0000:00: resource 0 io: [0x00-0xffff]
- pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
- pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
- pci_bus 0000:01: resource 1 mem: [0xfe700000-0xfe8fffff]
- pci_bus 0000:01: resource 2 mem: [0xde500000-0xde6fffff]
- pci_bus 0000:01: resource 3 io: [0x00-0xffff]
- pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
- pci_bus 0000:02: resource 0 io: [0xc000-0xc0ff]
- pci_bus 0000:02: resource 1 io: [0xc400-0xc4ff]
- pci_bus 0000:02: resource 2 mem: [0x14000000-0x17ffffff]
- pci_bus 0000:02: resource 3 mem: [0x18000000-0x1bffffff]
- pci_bus 0000:06: resource 0 io: [0xcc00-0xccff]
- pci_bus 0000:06: resource 1 io: [0x1000-0x10ff]
- pci_bus 0000:06: resource 2 mem: [0x1c000000-0x1fffffff]
- pci_bus 0000:06: resource 3 mem: [0x20000000-0x23ffffff]
- NET: Registered protocol family 2
- IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
- TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
- TCP: Hash tables configured (established 8192 bind 8192)
- TCP reno registered
- NET: Registered protocol family 1
- Machine check exception polling timer started.
- Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- NTFS driver 2.1.29 [Flags: R/W DEBUG].
- fuse init (API version 7.11)
- SGI XFS with ACLs, security attributes, no debug enabled
- msgmni has been set to 477
- alg: No test for fcrypt (fcrypt-generic)
- alg: No test for stdrng (krng)
- io scheduler noop registered
- io scheduler cfq registered (default)
- pci 0000:00:02.0: Boot video device
- pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f30
- pci 0000:00:1d.0: Performing full reset
- pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0030
- pci 0000:00:1d.1: Performing full reset
- pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0030
- pci 0000:00:1d.2: Performing full reset
- vesafb: framebuffer at 0xf0000000, mapped to 0xcff80000, using 4800k, total 8000k
- vesafb: mode is 1024x600x32, linelength=4096, pages=2
- vesafb: scrolling: redraw
- vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
- Console: switching to colour frame buffer device 128x37
- fb0: VESA VGA frame buffer device
- vga16fb: initializing
- vga16fb: mapped to 0xc00a0000
- fb1: VGA16 VGA frame buffer device
- ACPI: AC Adapter [AC0] (on-line)
- ACPI: EC: non-query interrupt received, switching to interrupt mode
- ACPI: Battery Slot [BAT0] (battery present)
- input: Power Button (FF) as /class/input/input0
- ACPI: Power Button (FF) [PWRF]
- input: Power Button (CM) as /class/input/input1
- ACPI: Power Button (CM) [SLPB]
- input: Lid Switch as /class/input/input2
- ACPI: Lid Switch [LID]
- fan PNP0C0B:00: registered as cooling_device0
- ACPI: Fan [FN00] (off)
- ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
- processor ACPI_CPU:00: registered as cooling_device1
- ACPI: Processor [CPU1] (supports 8 throttling states)
- thermal LNXTHERM:01: registered as thermal_zone0
- ACPI: Thermal Zone [THRM] (53 C)
- Non-volatile memory driver v1.3
- intel_rng: FWH not detected
- Linux agpgart interface v0.103
- agpgart-intel 0000:00:00.0: Intel 855GM Chipset
- agpgart-intel 0000:00:00.0: detected 8060K stolen memory
- agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
- [drm] Initialized drm 1.1.0 20060810
- intelfb: intelfb_init
- intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets
- intelfb: Version 0.9.6
- intelfb: intelfb_setup
- intelfb: no options
- intelfb: intelfb_pci_register
- ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
- intelfb 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
- intelfb: fb aperture: 0xf0000000/0x8000000, MMIO region: 0xfeb00000/0x80000
- intelfb: Cannot reserve FB region.
- intelfb: cleanup
- Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 6
- PCI: setting IRQ 6 as level-triggered
- serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 6 (level, low) -> IRQ 6
- serial 0000:00:1f.6: PCI INT B disabled
- brd: module loaded
- loop: module loaded
- PPP generic driver version 2.4.2
- PPP Deflate Compression module registered
- PPP BSD Compression module registered
- PPP MPPE Compression module registered
- NET: Registered protocol family 24
- 8139too Fast Ethernet driver 0.9.28
- 8139too 0000:01:04.0: PCI INT A -> Link[LNKE] -> GSI 5 (level, low) -> IRQ 5
- eth0: RealTek RTL8139 at 0xc800, 00:80:88:03:27:04, IRQ 5
- eth0: Identified 8139 chip type 'RTL-8101'
- tun: Universal TUN/TAP device driver, 1.6
- tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- usbcore: registered new interface driver cdc_ether
- ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kdmprq
- ipw2200: Copyright(c) 2003-2006 Intel Corporation
- ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 7
- ipw2200 0000:01:05.0: PCI INT A -> Link[LNKC] -> GSI 7 (level, low) -> IRQ 7
- ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
- eth1 (ipw2200): not using net_device_ops yet
- ipw2200 0000:01:05.0: firmware: requesting ipw2200-bss.fw
- Switched to high resolution mode on CPU 0
- ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2
- ipw2200: Unable to load firmware: -2
- ipw2200: failed to register network device
- ipw2200 0000:01:05.0: PCI INT A disabled
- ipw2200: probe of 0000:01:05.0 failed with error -5
- ieee80211: 802.11 data/management/control stack, git-1.1.13
- ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
- orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
- orinoco_cs 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
- Loaded prism54 driver, version 1.2
- Linux video capture interface: v2.00
- gspca: main v2.4.0 registered
- usbcore: registered new interface driver sunplus
- sunplus: registered
- usbcore: registered new interface driver uvcvideo
- USB Video Class driver (v0.1.0)
- usbcore: registered new interface driver dvb_usb_vp7045
- Driver 'sd' needs updating - please use bus_type methods
- Driver 'sr' needs updating - please use bus_type methods
- ata_piix 0000:00:1f.1: version 2.12
- ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
- ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 7 (level, low) -> IRQ 7
- ata_piix 0000:00:1f.1: setting latency timer to 64
- scsi0 : ata_piix
- scsi1 : ata_piix
- ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
- ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
- ata1.00: ATA-8: WDC WD2500BEVE-00WZT0, 01.01A01, max UDMA/100
- ata1.00: 488397168 sectors, multi 16: LBA48
- ata1.00: configured for UDMA/100
- scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVE-0 01.0 PQ: 0 ANSI: 5
- sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
- sd 0:0:0:0: [sda] Write Protect is off
- sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
- sd 0:0:0:0: [sda] Write Protect is off
- sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 > sda3 sda4
- sd 0:0:0:0: [sda] Attached SCSI disk
- sd 0:0:0:0: Attached scsi generic sg0 type 0
- ata2.01: NODEV after polling detection
- ata2.00: ATAPI: UJDA755 DVD/CDRW, 1.01, max UDMA/33
- ata2.00: configured for UDMA/33
- scsi 1:0:0:0: CD-ROM MATSHITA UJDA755 DVD/CDRW 1.01 PQ: 0 ANSI: 5
- sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
- Uniform CD-ROM driver Revision: 3.20
- sr 1:0:0:0: Attached scsi CD-ROM sr0
- sr 1:0:0:0: Attached scsi generic sg1 type 5
- ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 5
- firewire_ohci 0000:01:03.2: PCI INT C -> Link[LNKG] -> GSI 5 (level, low) -> IRQ 5
- firewire_ohci: Added fw-ohci device 0000:01:03.2, OHCI version 1.0
- yenta_cardbus 0000:01:03.0: CardBus bridge found [1043:1874]
- yenta_cardbus 0000:01:03.0: ISA IRQ mask 0x0c18, PCI irq 5
- yenta_cardbus 0000:01:03.0: Socket status: 30000006
- pci_bus 0000:01: Raising subordinate bus# of parent bus (#01) from #01 to #05
- yenta_cardbus 0000:01:03.0: pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff
- yenta_cardbus 0000:01:03.0: pcmcia: parent PCI bridge Memory window: 0xfe700000 - 0xfe8fffff
- yenta_cardbus 0000:01:03.0: pcmcia: parent PCI bridge Memory window: 0xde500000 - 0xde6fffff
- yenta_cardbus 0000:01:03.1: CardBus bridge found [1043:1874]
- firewire_core: created device fw0: GUID 00e01800031cca2d, S400
- yenta_cardbus 0000:01:03.1: ISA IRQ mask 0x0c18, PCI irq 7
- yenta_cardbus 0000:01:03.1: Socket status: 30000006
- pci_bus 0000:01: Raising subordinate bus# of parent bus (#01) from #05 to #09
- yenta_cardbus 0000:01:03.1: pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff
- yenta_cardbus 0000:01:03.1: pcmcia: parent PCI bridge Memory window: 0xfe700000 - 0xfe8fffff
- yenta_cardbus 0000:01:03.1: pcmcia: parent PCI bridge Memory window: 0xde500000 - 0xde6fffff
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
- ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 3
- PCI: setting IRQ 3 as level-triggered
- ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 3 (level, low) -> IRQ 3
- ehci_hcd 0000:00:1d.7: setting latency timer to 64
- ehci_hcd 0000:00:1d.7: EHCI Host Controller
- drivers/usb/core/inode.c: creating file 'devices'
- drivers/usb/core/inode.c: creating file '001'
- ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
- ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
- ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
- ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
- ehci_hcd 0000:00:1d.7: debug port 1
- ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
- ehci_hcd 0000:00:1d.7: supports USB remote wakeup
- ehci_hcd 0000:00:1d.7: irq 3, io mem 0xfebff800
- ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
- ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
- ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- usb usb1: default language 0x0409
- usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb1: Product: EHCI Host Controller
- usb usb1: Manufacturer: Linux 2.6.29-rc3 ehci_hcd
- usb usb1: SerialNumber: 0000:00:1d.7
- usb usb1: uevent
- usb usb1: usb_probe_device
- usb usb1: configuration #1 chosen from 1 choice
- usb usb1: adding 1-0:1.0 (config #1, interface 0)
- usb 1-0:1.0: uevent
- hub 1-0:1.0: usb_probe_interface
- hub 1-0:1.0: usb_probe_interface - got id
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 6 ports detected
- hub 1-0:1.0: standalone hub
- hub 1-0:1.0: no power switching (usb 1.0)
- hub 1-0:1.0: individual port over-current protection
- hub 1-0:1.0: power on to power good time: 20ms
- hub 1-0:1.0: local power source is good
- hub 1-0:1.0: trying to enable port power on non-switchable hub
- drivers/usb/core/inode.c: creating file '001'
- uhci_hcd: USB Universal Host Controller Interface driver
- uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
- uhci_hcd 0000:00:1d.0: setting latency timer to 64
- uhci_hcd 0000:00:1d.0: UHCI Host Controller
- drivers/usb/core/inode.c: creating file '002'
- uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
- uhci_hcd 0000:00:1d.0: detected 2 ports
- uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
- uhci_hcd 0000:00:1d.0: Performing full reset
- uhci_hcd 0000:00:1d.0: supports USB remote wakeup
- uhci_hcd 0000:00:1d.0: irq 5, io base 0x0000d480
- usb usb2: default language 0x0409
- usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb2: Product: UHCI Host Controller
- usb usb2: Manufacturer: Linux 2.6.29-rc3 uhci_hcd
- usb usb2: SerialNumber: 0000:00:1d.0
- usb usb2: uevent
- usb usb2: usb_probe_device
- usb usb2: configuration #1 chosen from 1 choice
- usb usb2: adding 2-0:1.0 (config #1, interface 0)
- usb 2-0:1.0: uevent
- hub 2-0:1.0: usb_probe_interface
- hub 2-0:1.0: usb_probe_interface - got id
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 2 ports detected
- hub 2-0:1.0: standalone hub
- hub 2-0:1.0: no power switching (usb 1.0)
- hub 2-0:1.0: individual port over-current protection
- hub 2-0:1.0: power on to power good time: 2ms
- hub 2-0:1.0: local power source is good
- hub 2-0:1.0: trying to enable port power on non-switchable hub
- drivers/usb/core/inode.c: creating file '001'
- ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 4
- PCI: setting IRQ 4 as level-triggered
- uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 4 (level, low) -> IRQ 4
- uhci_hcd 0000:00:1d.1: setting latency timer to 64
- uhci_hcd 0000:00:1d.1: UHCI Host Controller
- drivers/usb/core/inode.c: creating file '003'
- uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
- uhci_hcd 0000:00:1d.1: detected 2 ports
- uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
- uhci_hcd 0000:00:1d.1: Performing full reset
- uhci_hcd 0000:00:1d.1: supports USB remote wakeup
- uhci_hcd 0000:00:1d.1: irq 4, io base 0x0000d800
- usb usb3: default language 0x0409
- usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb3: Product: UHCI Host Controller
- usb usb3: Manufacturer: Linux 2.6.29-rc3 uhci_hcd
- usb usb3: SerialNumber: 0000:00:1d.1
- usb usb3: uevent
- usb usb3: usb_probe_device
- usb usb3: configuration #1 chosen from 1 choice
- usb usb3: adding 3-0:1.0 (config #1, interface 0)
- usb 3-0:1.0: uevent
- hub 3-0:1.0: usb_probe_interface
- hub 3-0:1.0: usb_probe_interface - got id
- hub 3-0:1.0: USB hub found
- hub 3-0:1.0: 2 ports detected
- hub 3-0:1.0: standalone hub
- hub 3-0:1.0: no power switching (usb 1.0)
- hub 3-0:1.0: individual port over-current protection
- hub 3-0:1.0: power on to power good time: 2ms
- hub 3-0:1.0: local power source is good
- hub 3-0:1.0: trying to enable port power on non-switchable hub
- hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
- drivers/usb/core/inode.c: creating file '001'
- uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 7 (level, low) -> IRQ 7
- uhci_hcd 0000:00:1d.2: setting latency timer to 64
- uhci_hcd 0000:00:1d.2: UHCI Host Controller
- drivers/usb/core/inode.c: creating file '004'
- uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
- uhci_hcd 0000:00:1d.2: detected 2 ports
- uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
- uhci_hcd 0000:00:1d.2: Performing full reset
- uhci_hcd 0000:00:1d.2: supports USB remote wakeup
- uhci_hcd 0000:00:1d.2: irq 7, io base 0x0000d880
- usb usb4: default language 0x0409
- usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb4: Product: UHCI Host Controller
- usb usb4: Manufacturer: Linux 2.6.29-rc3 uhci_hcd
- usb usb4: SerialNumber: 0000:00:1d.2
- usb usb4: uevent
- usb usb4: usb_probe_device
- usb usb4: configuration #1 chosen from 1 choice
- usb usb4: adding 4-0:1.0 (config #1, interface 0)
- usb 4-0:1.0: uevent
- hub 4-0:1.0: usb_probe_interface
- hub 4-0:1.0: usb_probe_interface - got id
- hub 4-0:1.0: USB hub found
- hub 4-0:1.0: 2 ports detected
- hub 4-0:1.0: standalone hub
- hub 4-0:1.0: no power switching (usb 1.0)
- hub 4-0:1.0: individual port over-current protection
- hub 4-0:1.0: power on to power good time: 2ms
- hub 4-0:1.0: local power source is good
- hub 4-0:1.0: trying to enable port power on non-switchable hub
- drivers/usb/core/inode.c: creating file '001'
- Initializing USB Mass Storage driver...
- usbcore: registered new interface driver usb-storage
- USB Mass Storage support registered.
- hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
- usbcore: registered new interface driver usbserial
- usbserial: USB Serial Driver core
- USB Serial support registered for FTDI USB Serial Device
- usbcore: registered new interface driver ftdi_sio
- ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver
- USB Serial support registered for pl2303
- usbcore: registered new interface driver pl2303
- pl2303: Prolific PL2303 USB to serial adaptor driver
- PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
- i8042.c: Detected active multiplexing controller, rev 1.1.
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX0 port at 0x60,0x64 irq 12
- serio: i8042 AUX1 port at 0x60,0x64 irq 12
- serio: i8042 AUX2 port at 0x60,0x64 irq 12
- serio: i8042 AUX3 port at 0x60,0x64 irq 12
- hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
- mice: PS/2 mouse device common for all mice
- input: PC Speaker as /class/input/input3
- device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
- cpuidle: using governor ladder
- cpuidle: using governor menu
- sdhci: Secure Digital Host Controller Interface driver
- sdhci: Copyright(c) Pierre Ossman
- usbcore: registered new interface driver hiddev
- usbcore: registered new interface driver usbhid
- usbhid: v2.6:USB HID core driver
- Asus Laptop ACPI Extras version 0.30
- unsupported model J3N, trying default values
- send /proc/acpi/dsdt to the developers
- hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
- Advanced Linux Sound Architecture Driver Version 1.0.18a.
- Intel ICH 0000:00:1f.5: enabling device (0005 -> 0007)
- Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 6 (level, low) -> IRQ 6
- Intel ICH 0000:00:1f.5: setting latency timer to 64
- input: AT Translated Set 2 keyboard as /class/input/input4
- Marking TSC unstable due to TSC halts in idle
- AC'97 0 analog subsections not ready
- IBM TrackPoint firmware: 0x12, buttons: 0/0
- input: TPPS/2 IBM TrackPoint as /class/input/input5
- intel8x0_measure_ac97_clock: measured 50490 usecs
- intel8x0: clocking to 48000
- Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 6 (level, low) -> IRQ 6
- Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
- usb usb2: suspend_rh (auto-stop)
- usb usb3: suspend_rh (auto-stop)
- usb usb4: suspend_rh (auto-stop)
- MC'97 1 converters and GPIO not ready (0xff00)
- ALSA device list:
- #0: Intel 82801DB-ICH4 with AD1980 at irq 6
- #1: Intel 82801DB-ICH4 Modem at irq 6
- ip_tables: (C) 2000-2006 Netfilter Core Team
- TCP cubic registered
- NET: Registered protocol family 17
- Bluetooth: L2CAP ver 2.11
- Bluetooth: L2CAP socket layer initialized
- Bluetooth: SCO (Voice Link) ver 0.6
- Bluetooth: SCO socket layer initialized
- Bluetooth: RFCOMM socket layer initialized
- Bluetooth: RFCOMM TTY layer initialized
- Bluetooth: RFCOMM ver 1.10
- Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- Bluetooth: BNEP filters: protocol multicast
- Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- RPC: Registered udp transport module.
- RPC: Registered tcp transport module.
- lib80211: common routines for IEEE802.11 drivers
- lib80211_crypt: registered algorithm 'NULL'
- lib80211_crypt: registered algorithm 'WEP'
- lib80211_crypt: registered algorithm 'CCMP'
- lib80211_crypt: registered algorithm 'TKIP'
- Using IPI Shortcut mode
- kjournald starting. Commit interval 5 seconds
- EXT3-fs: mounted filesystem with ordered data mode.
- VFS: Mounted root (ext3 filesystem) readonly on device 8:5.
- Freeing unused kernel memory: 256k freed
- hub 1-0:1.0: hub_suspend
- usb usb1: bus auto-suspend
- ehci_hcd 0000:00:1d.7: suspend root hub
- hub 2-0:1.0: hub_suspend
- usb usb2: bus auto-suspend
- usb usb2: suspend_rh
- hub 3-0:1.0: hub_suspend
- usb usb3: bus auto-suspend
- usb usb3: suspend_rh
- hub 4-0:1.0: hub_suspend
- usb usb4: bus auto-suspend
- usb usb4: suspend_rh
- usb usb2: uevent
- usb 2-0:1.0: uevent
- usb usb3: uevent
- usb 3-0:1.0: uevent
- usb usb4: uevent
- usb 4-0:1.0: uevent
- usb usb1: uevent
- usb 1-0:1.0: uevent
- EXT3 FS on sda5, internal journal
- kjournald starting. Commit interval 5 seconds
- EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
- EXT3 FS on dm-1, internal journal
- EXT3-fs: mounted filesystem with ordered data mode.
- kjournald starting. Commit interval 5 seconds
- EXT3 FS on dm-2, internal journal
- EXT3-fs: mounted filesystem with ordered data mode.
- kjournald starting. Commit interval 5 seconds
- EXT3 FS on dm-3, internal journal
- EXT3-fs: mounted filesystem with ordered data mode.
- kjournald starting. Commit interval 5 seconds
- EXT3 FS on dm-4, internal journal
- EXT3-fs: mounted filesystem with ordered data mode.
- kjournald starting. Commit interval 5 seconds
- EXT3 FS on dm-5, internal journal
- EXT3-fs: mounted filesystem with ordered data mode.
- kjournald starting. Commit interval 5 seconds
- EXT3 FS on dm-6, internal journal
- EXT3-fs: mounted filesystem with ordered data mode.
- kjournald starting. Commit interval 5 seconds
- EXT3 FS on dm-7, internal journal
- EXT3-fs: mounted filesystem with ordered data mode.
- Clocksource tsc unstable (delta = -64480145 ns)
- usb usb1: usb auto-resume
- ehci_hcd 0000:00:1d.7: resume root hub
- hub 1-0:1.0: hub_resume
- usb usb4: usb auto-resume
- usb usb4: wakeup_rh
- hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
- hub 4-0:1.0: hub_resume
- usb usb3: usb auto-resume
- usb usb3: wakeup_rh
- hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
- hub 3-0:1.0: hub_resume
- usb usb2: usb auto-resume
- usb usb2: wakeup_rh
- hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
- hub 2-0:1.0: hub_resume
- hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
- usb usb4: suspend_rh (auto-stop)
- usb usb3: suspend_rh (auto-stop)
- usb usb2: suspend_rh (auto-stop)
- hub 1-0:1.0: hub_suspend
- usb usb1: bus auto-suspend
- ehci_hcd 0000:00:1d.7: suspend root hub
- hub 4-0:1.0: hub_suspend
- usb usb4: bus auto-suspend
- usb usb4: suspend_rh
- hub 3-0:1.0: hub_suspend
- usb usb3: bus auto-suspend
- usb usb3: suspend_rh
- hub 2-0:1.0: hub_suspend
- usb usb2: bus auto-suspend
- usb usb2: suspend_rh
- Adding 4883720k swap on /dev/sda11. Priority:-1 extents:1 across:4883720k
- pci 0000:00:02.0: setting latency timer to 64
- [drm] Initialized i915 1.6.0 20080730 on minor 0
- eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement