API tools faq
paste
Advertisement
Guest User

U8230

a guest
Jan 24th, 2012
123
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 48.91 KB | None | 0 0
raw download clone embed print report
  1. <5>[0, swapper] [ 0.000000] Linux version 2.6.29-perf (samos@samos-desktop) (gcc version 4.4.0 (GCC) ) #2 PREEMPT Mon Oct 25 16:59:46 BST 2010
  2. <4>[0, swapper] [ 0.000000] CPU: ARMv6-compatible processor [4117b362] revision 2 (ARMv6TEJ), cr=00c5387f
  3. <4>[0, swapper] [ 0.000000] CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
  4. <4>[0, swapper] [ 0.000000] Machine: QCT SURF7201A Board
  5. <6>[0, swapper] [ 0.000000] Partition (from atag) boot -- Offset:130 Size:28
  6. <6>[0, swapper] [ 0.000000] Partition (from atag) recovery -- Offset:158 Size:28
  7. <6>[0, swapper] [ 0.000000] Partition (from atag) misc -- Offset:180 Size:a
  8. <6>[0, swapper] [ 0.000000] Partition (from atag) splash -- Offset:18a Size:3
  9. <6>[0, swapper] [ 0.000000] Partition (from atag) system -- Offset:18d Size:550
  10. <6>[0, swapper] [ 0.000000] Partition (from atag) cache -- Offset:6dd Size:230
  11. <6>[0, swapper] [ 0.000000] Partition (from atag) userdata -- Offset:90d Size:653
  12. <6>[0, swapper] [ 0.000000] Partition (from atag) userdata2 -- Offset:f60 Size:a0
  13. <4>[0, swapper] [ 0.000000] ########proc_misc.c: tag_boot_flash_id= Hynx-0x5510bcad
  14. <4>[0, swapper] [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  15. <7>[0, swapper] [ 0.000000] On node 0 totalpages: 65536
  16. <7>[0, swapper] [ 0.000000] free_area_init_node: node 0, pgdat c0533ac8, node_mem_map c064d000
  17. <7>[0, swapper] [ 0.000000] Normal zone: 512 pages used for memmap
  18. <7>[0, swapper] [ 0.000000] Normal zone: 0 pages reserved
  19. <7>[0, swapper] [ 0.000000] Normal zone: 65024 pages, LIFO batch:15
  20. <6>[0, swapper] [ 0.000000] allocating 8388608 bytes at c102a000 (1102a000 physical) for mdp pmem arena
  21. <6>[0, swapper] [ 0.000000] allocating 12582912 bytes at c102a000 (1102a000 physical) for adsp pmem arena
  22. <6>[0, swapper] [ 0.000000] allocating 8388608 bytes at c1900000 (11900000 physical) for gpu1 pmem arena
  23. <6>[0, swapper] [ 0.000000] allocating 2097152 bytes at c1900000 (11900000 physical) for fb
  24. <4>[0, swapper] [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
  25. <5>[0, swapper] [ 0.000000] Kernel command line: mem=256M console=ttyMSM2,9600n8 androidboot.hardware=qcom console=ttyUSBCONSOLE0 androidboot.console=ttyUSBCONSOLE0 androidboot.localproppath=hw/normal
  26. <3>[0, swapper] [ 0.000000] Unknown boot option `androidboot.hardware=qcom': ignoring
  27. <3>[0, swapper] [ 0.000000] Unknown boot option `androidboot.console=ttyUSBCONSOLE0': ignoring
  28. <3>[0, swapper] [ 0.000000] Unknown boot option `androidboot.localproppath=hw/normal': ignoring
  29. <4>[0, swapper] [ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
  30. <4>[0, swapper] [ 0.000000] Console: colour dummy device 80x30
  31. <6>[0, swapper] [ 0.000311] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  32. <6>[0, swapper] [ 0.001526] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  33. <6>[0, swapper] [ 0.022508] Memory: 256MB = 256MB total
  34. <5>[0, swapper] [ 0.022551] Memory: 236672KB available (4768K code, 1337K data, 300K init)
  35. <6>[0, swapper] [ 0.022968] Calibrating delay loop... 527.56 BogoMIPS (lpj=2637824)
  36. <4>[0, swapper] [ 0.270300] Mount-cache hash table entries: 512
  37. <6>[0, swapper] [ 0.271151] CPU: Testing write buffer coherency: ok
  38. <6>[1, swapper] [ 0.275543] net_namespace: 932 bytes
  39. <6>[1, swapper] [ 0.277451] NET: Registered protocol family 16
  40. <6>[1, swapper] [ 0.282931] socinfo_init: v2, id=16, ver=2.0, raw_id=368, raw_ver=3
  41. <6>[1, swapper] [ 0.282971] acpu_clock_init()
  42. <6>[1, swapper] [ 0.283143] L val: PLL0: 12, PLL1: 50, PLL2: 55
  43. <6>[1, swapper] [ 0.283168] Turbo mode supported and enabled.
  44. <6>[1, swapper] [ 0.283236] ACPU running at 528000 KHz
  45. <6>[1, swapper] [ 0.283265] Id CPU-KHz PLL DIV AHB-KHz ADIV AXI-KHz D0 D1 D2 U0 U1 U2
  46. <6>[1, swapper] [ 0.283296] 0 19200 -1 1 19200 1 30720 -1 -1 -1 4 1 3
  47. <6>[1, swapper] [ 0.283326] 1 120000 1 8 60000 2 61440 -1 -1 -1 4 5 6
  48. <6>[1, swapper] [ 0.283356] 2 122880 0 2 61440 2 61440 -1 1 -1 4 5 6
  49. <6>[1, swapper] [ 0.283386] 3 176000 2 6 88000 2 61440 2 1 -1 4 5 6
  50. <6>[1, swapper] [ 0.283415] 4 245760 0 1 81920 3 61440 2 1 3 -1 7 6
  51. <6>[1, swapper] [ 0.283445] 5 320000 1 3 107000 3 120000 2 1 3 -1 7 9
  52. <6>[1, swapper] [ 0.283475] 6 352000 2 3 88000 4 120000 2 1 3 -1 7 10
  53. <6>[1, swapper] [ 0.283505] 7 480000 1 2 120000 4 120000 4 5 6 -1 -1 15
  54. <6>[1, swapper] [ 0.283536] 8 528000 2 2 132000 4 160000 -1 5 6 -1 -1 15
  55. <6>[1, swapper] [ 0.283566] 9 576000 2 2 132000 4 160000 -1 5 6 -1 -1 15
  56. <6>[1, swapper] [ 0.283596] 10 595200 2 2 132000 4 160000 -1 7 6 -1 -1 15
  57. <6>[1, swapper] [ 0.283626] 11 614400 2 2 132000 4 160000 -1 7 8 -1 -1 15
  58. <6>[1, swapper] [ 0.283656] 12 633600 2 2 132000 4 160000 -1 7 8 -1 -1 15
  59. <6>[1, swapper] [ 0.283686] 13 652800 2 2 132000 4 160000 -1 7 8 -1 -1 15
  60. <6>[1, swapper] [ 0.283716] 14 672000 2 2 132000 4 160000 -1 7 8 -1 -1 15
  61. <6>[1, swapper] [ 0.283746] 15 691200 2 2 132000 4 160000 -1 7 8 -1 -1 -1
  62. <6>[1, swapper] [ 0.283770] 12 scaling frequencies supported.
  63. <3>[1, swapper] [ 0.284133] < proc_usb_para
  64. <3>[1, swapper] [ 0.284156] vendor:hw,country:normal
  65. <3>[1, swapper] [ 0.284171] USB setting is NORMAL
  66. <3>[1, swapper] [ 0.284195] smem usb_serial=2DD7E8F58C60370D, usb_pid_index=21
  67. <3>[1, swapper] [ 0.284220] pid_index_to_pid, pid_index=22, usb_pid=0x1502
  68. <3>[1, swapper] [ 0.284241] curr_usb_pid_ptr: 0x1031, 0x1502, 0x1005
  69. <3>[1, swapper] [ 0.284260] usb_para_info: usb_pid_index=21, usb_pid = 0x1502>
  70. <4>[1, swapper] [ 0.302640] msm_init_vibrator
  71. <4>[1, swapper] [ 0.352556] bio: create slab <bio-0> at 0
  72. <6>[1, swapper] [ 0.356031] msm_i2c_probe
  73. <6>[1, swapper] [ 0.356228] msm_i2c_probe: clk_ctl 35d, 100000 Hz
  74. <6>[1, swapper] [ 0.368960] Bluetooth: Core ver 2.15
  75. <6>[1, swapper] [ 0.369843] NET: Registered protocol family 31
  76. <6>[1, swapper] [ 0.369878] Bluetooth: HCI device and connection manager initialized
  77. <6>[1, swapper] [ 0.369910] Bluetooth: HCI socket layer initialized
  78. <6>[1, swapper] [ 0.371205] cfg80211: Using static regulatory domain info
  79. <6>[1, swapper] [ 0.371243] cfg80211: Regulatory domain: US
  80. <6>[1, swapper] [ 0.371265] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  81. <6>[1, swapper] [ 0.371291] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
  82. <6>[1, swapper] [ 0.371316] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  83. <6>[1, swapper] [ 0.371341] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  84. <6>[1, swapper] [ 0.371365] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  85. <6>[1, swapper] [ 0.371390] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  86. <6>[1, swapper] [ 0.371415] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
  87. <6>[1, swapper] [ 0.371441] cfg80211: Calling CRDA for country: US
  88. <6>[1, swapper] [ 0.377745] NET: Registered protocol family 2
  89. <6>[1, swapper] [ 0.378056] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
  90. <6>[1, swapper] [ 0.378771] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  91. <6>[1, swapper] [ 0.379343] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
  92. <6>[1, swapper] [ 0.379631] TCP: Hash tables configured (established 8192 bind 8192)
  93. <6>[1, swapper] [ 0.379655] TCP reno registered
  94. <6>[1, swapper] [ 0.380020] NET: Registered protocol family 1
  95. <7>[1, swapper] [ 0.380603] Switched to high resolution mode on CPU 0
  96. <6>[1, swapper] [ 0.381090] checking if image is initramfs... it is
  97. <6>[1, swapper] [ 0.465716] Freeing initrd memory: 164K
  98. <6>[1, swapper] [ 0.469031] smd probe
  99. <6>[1, swapper] [ 0.469073] smd_core_init()
  100. <6>[1, swapper] [ 0.469210] smd_core_init() done
  101. <6>[4, events/0] [ 0.469665] smd_alloc_channel() 'DS' cid=0
  102. <3>[1, swapper] [ 0.470371] _smem_log_init: no power log or log_idx allocated, smem_log disabled
  103. <6>[4, events/0] [ 0.471566] smd_alloc_channel() 'DIAG' cid=1
  104. <6>[4, events/0] [ 0.472628] smd_alloc_channel() 'RPCCALL' cid=2
  105. <6>[4, events/0] [ 0.473560] smd_alloc_channel() 'DATA1' cid=7
  106. <6>[4, events/0] [ 0.474691] smd_alloc_channel() 'DATA2' cid=8
  107. <6>[4, events/0] [ 0.475835] smd_alloc_channel() 'DATA3' cid=9
  108. <6>[4, events/0] [ 0.476971] smd_alloc_channel() 'DATA4' cid=10
  109. <6>[4, events/0] [ 0.478113] smd_alloc_channel() 'DATA5' cid=11
  110. <6>[4, events/0] [ 0.479111] smd_alloc_channel() 'DATA6' cid=12
  111. <6>[4, events/0] [ 0.480035] smd_alloc_channel() 'DATA7' cid=13
  112. <6>[4, events/0] [ 0.481913] smd_alloc_channel() 'DATA11' cid=17
  113. <6>[4, events/0] [ 0.483135] smd_alloc_channel() 'DATA5_CNTL' cid=38
  114. <6>[4, events/0] [ 0.484228] smd_alloc_channel() 'DATA6_CNTL' cid=39
  115. <6>[4, events/0] [ 0.485256] smd_alloc_channel() 'DATA7_CNTL' cid=40
  116. <6>[1, swapper] [ 0.488101] SMD Control Port Driver Initialized.
  117. <6>[1, swapper] [ 0.490331] SMD: ch 2 CLOSED -> OPENING
  118. <6>[1, swapper] [ 0.490460] SMD: ch 2 OPENING -> OPENED
  119. <3>[1, swapper] [ 0.493083] Using very old AMSS modem firmware.
  120. <3>[1, swapper] [ 0.493185] Using very old AMSS modem firmware.
  121. <6>[1, swapper] [ 0.494388] ADSP: rs3000000a:00010000 -- 0
  122. <3>[261, rpcrouter] [ 0.525965] rpcrouter: Server create rejected, version = 0, program = 30000012
  123. <3>[261, rpcrouter] [ 0.526018] rpcrouter: Server create rejected, version = 0, program = 3000fe00
  124. <3>[261, rpcrouter] [ 0.536438] rpcrouter: Server create rejected, version = 0, program = 30000066
  125. <6>[266, krpcserversd] [ 0.538021] RPC_TIME_TOD_SET_APPS_BASES:
  126. <6>[266, krpcserversd] [ 0.538041] tick = 157664
  127. <6>[266, krpcserversd] [ 0.538051] stamp = 794911488
  128. <4>[266, krpcserversd] [ 0.538126] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  129. <6>[1, swapper] [ 0.563431] ashmem: initialized
  130. <6>[1, swapper] [ 0.566323] fuse init (API version 7.11)
  131. <4>[1, swapper] [ 0.567600] yaffs Oct 25 2010 16:51:54 Installing.
  132. <6>[1, swapper] [ 0.567730] msgmni has been set to 463
  133. <6>[380, cryptomgr_test] [ 0.584493] alg: No test for stdrng (krng)
  134. <6>[1, swapper] [ 0.584666] io scheduler noop registered
  135. <6>[1, swapper] [ 0.584695] io scheduler anticipatory registered (default)
  136. <6>[1, swapper] [ 0.587260] msm_fb_probe: phy_Addr = 0x3e00000 virt = 0xd0c00000
  137. <6>[1, swapper] [ 0.591591] MDP HW Base phy_Address = 0xaa200000 virt = 0xd0900000
  138. <6>[1, swapper] [ 0.593238] primary mddi base phy_addr = 0xaa600000 virt = 0xd0862000
  139. <4>[1, swapper] [ 0.850768] prim_init:1
  140. <6>[1, swapper] [ 0.850970] stop2normal start
  141. <6>[1, swapper] [ 0.851180] stop2normal resume end
  142. <6>[1, swapper] [ 0.955650] Panel state (4)
  143. <6>[1, swapper] [ 1.183670] state_end (0)
  144. <4>[1, swapper] [ 1.291111] prim_init_end:3
  145. <4>[1, swapper] [ 1.334800] Console: switching to colour frame buffer device 40x30
  146. <6>[1, swapper] [ 1.353910] FrameBuffer[0] 320x480 size=614400 bytes is registered successfully!
  147. <4>[1, swapper] [ 1.354013] load_565rle_image: Can not open /logo.rle
  148. <6>[1, swapper] [ 1.355105] Registered led device: lcd-backlight
  149. <6>[1, swapper] [ 1.397385] diagfwd initializing ..
  150. <6>[1, swapper] [ 1.397925] SMD: ch 1 CLOSED -> OPENING
  151. <6>[1, swapper] [ 1.397956] diag opened SMD port ; r = 0
  152. <6>[1, swapper] [ 1.398031] SMD: ch 1 OPENING -> OPENED
  153. <6>[1, swapper] [ 1.398638] diagchar initializing ..
  154. <6>[1, swapper] [ 1.399761] diagchar initialized
  155. <6>[1, swapper] [ 1.399970] msm_serial: detected port #2
  156. <6>[1, swapper] [ 1.400153] msm_serial.2: ttyMSM2 at MMIO 0xa9c00000 (irq = 11) is a MSM
  157. <6>[1, swapper] [ 1.402431] msm_serial: driver initialized
  158. <6>[1, swapper] [ 1.402873] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 45) is a MSM HS UART
  159. <6>[1, swapper] [ 1.404351] msm_serial_hs module loaded
  160. <6>[1, swapper] [ 1.414580] brd: module loaded
  161. <6>[1, swapper] [ 1.424971] loop: module loaded
  162. <6>[1, swapper] [ 1.425250] pmem: 1 init
  163. <6>[1, swapper] [ 1.426568] pmem_adsp: 0 init
  164. <6>[1, swapper] [ 1.428265] PPP generic driver version 2.4.2
  165. <6>[1, swapper] [ 1.429403] PPP Deflate Compression module registered
  166. <6>[1, swapper] [ 1.429446] PPP BSD Compression module registered
  167. <6>[1, swapper] [ 1.430648] PPP MPPE Compression module registered
  168. <6>[1, swapper] [ 1.430695] NET: Registered protocol family 24
  169. <6>[1, swapper] [ 1.430796] PPPoL2TP kernel driver, V1.0
  170. <6>[1, swapper] [ 1.430825] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  171. <6>[1, swapper] [ 1.430853] CSLIP: code copyright 1989 Regents of the University of California.
  172. <4>[1, swapper] [ 1.432521] smc91x: not found (-19).
  173. <6>[1, swapper] [ 1.433345] rmnet0 (): not using net_device_ops yet
  174. <6>[1, swapper] [ 1.434525] rmnet1 (): not using net_device_ops yet
  175. <6>[1, swapper] [ 1.435738] rmnet2 (): not using net_device_ops yet
  176. <6>[1, swapper] [ 1.436835] Linux video capture interface: v2.00
  177. <3>[1, swapper] [ 1.580193] msm_i2c msm_i2c.0: Error during data xfer (-5)
  178. <6>[1, swapper] [ 1.583046] msm_nand: phys addr 0xa0a00000 dmac 0x7
  179. <6>[1, swapper] [ 1.583123] allocated dma buffer at ffa2e000, dma_addr 1fbfe000
  180. <6>[1, swapper] [ 1.583536] ONFI probe : CRC Check failed on ONFI Parameter data
  181. <6>[1, swapper] [ 1.583646] status: e00020
  182. <6>[1, swapper] [ 1.583671] nandid: 5510bcad maker ad device bc
  183. <6>[1, swapper] [ 1.583695] Found a supported NAND device
  184. <6>[1, swapper] [ 1.583711] NAND Id : 0x5510bcad
  185. <6>[1, swapper] [ 1.583728] Buswidth : 16 Bits
  186. <6>[1, swapper] [ 1.583743] Density : 512 MByte
  187. <6>[1, swapper] [ 1.583758] Pagesize : 2048 Bytes
  188. <6>[1, swapper] [ 1.583773] Erasesize: 131072 Bytes
  189. <6>[1, swapper] [ 1.583788] Oobsize : 64 Bytes
  190. <6>[1, swapper] [ 1.583805] CFG0 Init : 0xa85408c0
  191. <6>[1, swapper] [ 1.583820] CFG1 Init : 0x0004745e
  192. <6>[1, swapper] [ 1.583835] ECCBUFCFG : 0x00000203
  193. <5>[1, swapper] [ 1.583866] Creating 8 MTD partitions on "msm_nand":
  194. <5>[1, swapper] [ 1.583900] 0x000002600000-0x000002b00000 : "boot"
  195. <5>[1, swapper] [ 1.586730] 0x000002b00000-0x000003000000 : "recovery"
  196. <5>[1, swapper] [ 1.588843] 0x000003000000-0x000003140000 : "misc"
  197. <5>[1, swapper] [ 1.591383] 0x000003140000-0x0000031a0000 : "splash"
  198. <5>[1, swapper] [ 1.593583] 0x0000031a0000-0x00000dba0000 : "system"
  199. <5>[1, swapper] [ 1.595690] 0x00000dba0000-0x0000121a0000 : "cache"
  200. <5>[1, swapper] [ 1.597893] 0x0000121a0000-0x00001ec00000 : "userdata"
  201. <5>[1, swapper] [ 1.600101] 0x00001ec00000-0x000020000000 : "userdata2"
  202. <6>[1, swapper] [ 1.603056] msm_hsusb_rpc_connect: rpc connect success vers = 10001
  203. <6>[1, swapper] [ 1.603110] msm_chg_rpc_connect: connected to rpc vers = 10001
  204. <6>[1, swapper] [ 1.603315] usb_set_composition: composition set to product id = 1502
  205. <6>[1, swapper] [ 1.603348] phy info:(2)
  206. <6>[1, swapper] [ 1.603503] usb_probe() io=d0874000, irq=47, dma=ffa2f000(1fb70000)
  207. <6>[1, swapper] [ 1.611840] msm_hsusb_reset_rework_installed: rework: (16777216)
  208. <6>[1, swapper] [ 1.611873] usb_probe: reset rework is installed
  209. <6>[1, swapper] [ 1.612240] Created the sysfs entry successfully
  210. <6>[1, swapper] [ 1.614768] usb_function_register: name = 'adb', map = 3
  211. <6>[1, swapper] [ 1.615948] usb_function_register: name = 'mass_storage', map = 2
  212. <6>[1, swapper] [ 1.616711] usb_function_register: name = 'diag', map = 4
  213. <6>[1, swapper] [ 1.618551] usb_function_register: name = 'modem', map = 0
  214. <3>[1, swapper] [ 1.618595] usb_function_register: unsupported function = nmea
  215. <3>[1, swapper] [ 1.618618] gs_module_init: cannot register Function driver, ret = -22
  216. <3>[1, swapper] [ 1.618646] usb_function_register: unsupported function = ethernet
  217. <6>[1, swapper] [ 1.618666] cdcecm init:usb function register failed
  218. <6>[1, swapper] [ 1.619386] usb_function_register: name = 'pcui', map = 1
  219. <6>[1, swapper] [ 1.619428] usb_set_composition: composition set to product id = 1502
  220. <3>[1, swapper] [ 1.620011] msm_hsusb_is_serial_num_null: rpc call success
  221. <3>[1, swapper] [ 1.620851] msm_hsusb_send_productID: rpc call success
  222. <6>[1, swapper] [ 1.620886] msm_hsusb: functions bound. starting.
  223. <6>[1, swapper] [ 1.620908] usb_bind_func() (modem)
  224. <6>[1, swapper] [ 1.620988] usb_bind_func() (pcui)
  225. <6>[1, swapper] [ 1.621016] pcui_bind() cfb178a0, cfb17b04
  226. <6>[1, swapper] [ 1.621083] pcui_bind() allocated 4 rx and 4 tx requests
  227. <6>[1, swapper] [ 1.621103] usb_bind_func() (mass_storage)
  228. <6>[1, swapper] [ 1.621558] usb_bind_func() (adb)
  229. <6>[1, swapper] [ 1.621660] usb_bind_func() (diag)
  230. <3>[1, swapper] [ 1.621690] usb_start: pm_app_rpc connect failed
  231. <3>[1, swapper] [ 1.872870] msm_i2c msm_i2c.0: Error during data xfer (-5)
  232. <3>[1, swapper] [ 1.873075] msm_i2c msm_i2c.0: Error during data xfer (-5)
  233. <3>[1, swapper] [ 1.873273] msm_i2c msm_i2c.0: Error during data xfer (-5)
  234. <4>[1, swapper] [ 1.873410] synaptics-rmi-ts: probe of 0-0020 failed with error -5
  235. <6>[574, usb_work] [ 2.675451] msm_hsusb_phy_reset
  236. <3>[1, swapper] [ 2.676269] msm_i2c msm_i2c.0: Error during data xfer (-5)
  237. <3>[1, swapper] [ 2.676478] msm_i2c msm_i2c.0: Error during data xfer (-5)
  238. <3>[1, swapper] [ 2.676646] msm_i2c msm_i2c.0: Error during data xfer (-5)
  239. <3>[1, swapper] [ 2.676823] msm_i2c msm_i2c.0: Error during data xfer (-5)
  240. <3>[1, swapper] [ 2.676978] msm_i2c msm_i2c.0: Error during data xfer (-5)
  241. <3>[1, swapper] [ 2.677128] msm_i2c msm_i2c.0: Error during data xfer (-5)
  242. <3>[1, swapper] [ 2.677279] msm_i2c msm_i2c.0: Error during data xfer (-5)
  243. <3>[1, swapper] [ 2.677428] msm_i2c msm_i2c.0: Error during data xfer (-5)
  244. <3>[1, swapper] [ 2.677578] msm_i2c msm_i2c.0: Error during data xfer (-5)
  245. <3>[1, swapper] [ 2.677728] msm_i2c msm_i2c.0: Error during data xfer (-5)
  246. <4>[1, swapper] [ 2.677798] cpt_ts: probe of 0-000a failed with error -5
  247. <6>[1, swapper] [ 3.181546] input: melfas-touchscreen as /devices/virtual/input/input0
  248. <3>[1, swapper] [ 3.283694] msm_i2c msm_i2c.0: Error during data xfer (-5)
  249. <3>[1, swapper] [ 3.283866] msm_i2c msm_i2c.0: Error during data xfer (-5)
  250. <3>[1, swapper] [ 3.284021] msm_i2c msm_i2c.0: Error during data xfer (-5)
  251. <3>[1, swapper] [ 3.284173] msm_i2c msm_i2c.0: Error during data xfer (-5)
  252. <3>[1, swapper] [ 3.284324] msm_i2c msm_i2c.0: Error during data xfer (-5)
  253. <3>[1, swapper] [ 3.284471] msm_i2c msm_i2c.0: Error during data xfer (-5)
  254. <3>[1, swapper] [ 3.284621] msm_i2c msm_i2c.0: Error during data xfer (-5)
  255. <3>[1, swapper] [ 3.284769] msm_i2c msm_i2c.0: Error during data xfer (-5)
  256. <3>[1, swapper] [ 3.284919] msm_i2c msm_i2c.0: Error during data xfer (-5)
  257. <3>[1, swapper] [ 3.285069] msm_i2c msm_i2c.0: Error during data xfer (-5)
  258. <4>[1, swapper] [ 3.285096] no cypress_ts device
  259. <4>[1, swapper] [ 3.285108] <4>cypress-innolux-ts: probe of 0-0025 failed with error -5
  260. <3>[1, swapper] [ 3.285958] msm_i2c msm_i2c.0: Error during data xfer (-5)
  261. <3>[1, swapper] [ 3.286004] i2c_smbus_read_byte_data failed 0
  262. <4>[1, swapper] [ 3.286048] GS: probe of 0-0053 failed with error -5
  263. <6>[1, swapper] [ 3.287869] input: gsensor as /devices/virtual/input/input1
  264. <6>[1, swapper] [ 3.289443] gs_probe: Start LIS35DE in polling mode
  265. <3>[1, swapper] [ 3.290264] msm_i2c msm_i2c.0: Error during data xfer (-5)
  266. <3>[1, swapper] [ 3.290311] i2c_smbus_write_byte_data failed d
  267. <4>[1, swapper] [ 3.290363] freescale: probe of 0-001c failed with error -5
  268. <6>[1, swapper] [ 3.292396] GPIO Matrix Keypad Driver: Start keypad matrix for surf_keypad in interrupt mode
  269. <6>[1, swapper] [ 3.293433] input: surf_keypad as /devices/virtual/input/input2
  270. <6>[1, swapper] [ 3.296208] input: jogball as /devices/virtual/input/input3
  271. <7>[1, swapper] [ 3.298756] RTC Registering with rs30000048:00010000
  272. <7>[1, swapper] [ 3.301314] msm_rtc: dev (254:0)
  273. <6>[1, swapper] [ 3.301398] rs30000048:00010000 rs30000048:00010000: rtc core: registered msm_rtc as rtc0
  274. <7>[1, swapper] [ 3.302186] msm_rtc_secure: dev (254:1)
  275. <6>[1, swapper] [ 3.302223] rs30000048:00010000 rs30000048:00010000: rtc core: registered msm_rtc_secure as rtc1
  276. <6>[1, swapper] [ 3.302733] i2c /dev entries driver
  277. <6>[1, swapper] [ 3.305314] device-mapper: uevent: version 1.0.3
  278. <6>[1, swapper] [ 3.306499] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
  279. <6>[1, swapper] [ 3.306653] Bluetooth: HCI UART driver ver 2.2
  280. <6>[1, swapper] [ 3.306681] Bluetooth: HCI H4 protocol initialized
  281. <6>[1, swapper] [ 3.306703] Bluetooth: HCI BCSP protocol initialized
  282. <6>[1, swapper] [ 3.306723] Bluetooth: MSM Sleep Mode Driver Ver 1.1
  283. <7>[1, swapper] [ 3.307584] bluetooth_power_init
  284. <7>[1, swapper] [ 3.307733] bt_power_probe
  285. <3>[1, swapper] [ 3.310154] mmc0: No card detect facilities available
  286. <6>[1, swapper] [ 3.311168] mmc0: Qualcomm MSM SDCC at 0x00000000a0400000 irq 24,0 dma 8
  287. <6>[1, swapper] [ 3.311203] mmc0: 8 bit data mode disabled
  288. <6>[1, swapper] [ 3.311221] mmc0: 4 bit data mode enabled
  289. <6>[1, swapper] [ 3.311238] mmc0: polling status mode disabled
  290. <6>[1, swapper] [ 3.311258] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
  291. <6>[1, swapper] [ 3.311278] mmc0: Slot eject status = 0
  292. <6>[1, swapper] [ 3.311294] mmc0: Power save feature enable = 1
  293. <6>[1, swapper] [ 3.311318] mmc0: DM non-cached buffer at ffa31000, dma_addr 0x1fbdd000
  294. <6>[1, swapper] [ 3.311341] mmc0: DM cmd busaddr 0x1fbdd000, cmdptr busaddr 0x1fbdd300
  295. <3>[1, swapper] [ 3.311813] mmc1: No card detect facilities available
  296. <6>[1, swapper] [ 3.313051] mmc1: Qualcomm MSM SDCC at 0x00000000a0500000 irq 26,0 dma 8
  297. <6>[1, swapper] [ 3.313088] mmc1: 8 bit data mode disabled
  298. <6>[1, swapper] [ 3.313108] mmc1: 4 bit data mode enabled
  299. <6>[1, swapper] [ 3.313124] mmc1: polling status mode disabled
  300. <6>[1, swapper] [ 3.313144] mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
  301. <6>[1, swapper] [ 3.313164] mmc1: Slot eject status = 0
  302. <6>[1, swapper] [ 3.313181] mmc1: Power save feature enable = 1
  303. <6>[1, swapper] [ 3.313204] mmc1: DM non-cached buffer at ffa32000, dma_addr 0x1fbde000
  304. <6>[1, swapper] [ 3.313228] mmc1: DM cmd busaddr 0x1fbde000, cmdptr busaddr 0x1fbde300
  305. <6>[1, swapper] [ 3.315113] Registered led device: keyboard-backlight
  306. <6>[1, swapper] [ 3.319454] log nv setting Success...
  307. <6>[1, swapper] [ 3.320286] logger: created 64K log 'log_main'
  308. <6>[1, swapper] [ 3.320954] log nv setting Success...
  309. <6>[1, swapper] [ 3.321791] logger: created 256K log 'log_events'
  310. <6>[1, swapper] [ 3.322253] log nv setting Success...
  311. <6>[1, swapper] [ 3.322989] logger: created 64K log 'log_radio'
  312. <6>[1, swapper] [ 3.324771] Advanced Linux Sound Architecture Driver Version 1.0.18a.
  313. <6>[1, swapper] [ 3.326286] ALSA device list:
  314. <6>[1, swapper] [ 3.326323] No soundcards found.
  315. <4>[1, swapper] [ 3.326484] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
  316. <6>[1, swapper] [ 3.327121] IPv4 over IPv4 tunneling driver
  317. <6>[1, swapper] [ 3.328731] ip_tables: (C) 2000-2006 Netfilter Core Team
  318. <6>[1, swapper] [ 3.328883] TCP cubic registered
  319. <6>[1, swapper] [ 3.329284] NET: Registered protocol family 10
  320. <6>[1, swapper] [ 3.331653] IPv6 over IPv4 tunneling driver
  321. <6>[1, swapper] [ 3.333406] NET: Registered protocol family 17
  322. <6>[1, swapper] [ 3.333506] NET: Registered protocol family 15
  323. <6>[1, swapper] [ 3.333583] Bluetooth: L2CAP ver 2.13
  324. <6>[1, swapper] [ 3.333603] Bluetooth: L2CAP socket layer initialized
  325. <6>[1, swapper] [ 3.333638] Bluetooth: SCO (Voice Link) ver 0.6
  326. <6>[1, swapper] [ 3.333656] Bluetooth: SCO socket layer initialized
  327. <6>[1, swapper] [ 3.333954] Bluetooth: RFCOMM socket layer initialized
  328. <6>[1, swapper] [ 3.334066] Bluetooth: RFCOMM TTY layer initialized
  329. <6>[1, swapper] [ 3.334094] Bluetooth: RFCOMM ver 1.11
  330. <6>[1, swapper] [ 3.334116] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  331. <6>[1, swapper] [ 3.334136] Bluetooth: BNEP filters: protocol multicast
  332. <6>[1, swapper] [ 3.334159] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  333. <6>[1, swapper] [ 3.335651] RPC: Registered udp transport module.
  334. <6>[1, swapper] [ 3.335691] RPC: Registered tcp transport module.
  335. <6>[1, swapper] [ 3.336294] clock_late_init() disabled 17 unused clocks
  336. <6>[1, swapper] [ 3.338618] input: msm-handset as /devices/virtual/input/input4
  337. <3>[1, swapper] [ 3.339361] hs_rpc_cb_init: couldn't open rpc client with version 2 err -113
  338. <3>[1, swapper] [ 3.339421] hs_rpc_cb_init: couldn't open rpc client with version 1 err -113
  339. <3>[1, swapper] [ 3.339444] hs_rpc_init: failed to initialize rpc client
  340. <6>[1, swapper] [ 3.341768] input: ts_test_input as /devices/virtual/input/input5
  341. <6>[1, swapper] [ 3.343383] input: kp_test_input as /devices/virtual/input/input6
  342. <6>[1, swapper] [ 3.398836] mt9t013_byd.c: i2c probe ok
  343. <6>[1, swapper] [ 3.503458] mt9t013_byd.c: mt9t013_byd chipid = 0x2600
  344. <6>[1, swapper] [ 3.581534] mt9t013_byd.c: mt9t013_byd model_id = 0xfff2
  345. <6>[574, usb_work] [ 3.582469] usb_lpm_enter: usb in low power mode
  346. <6>[574, usb_work] [ 3.582501] hsusb: IDLE -> OFFLINE
  347. <6>[1, swapper] [ 3.637764] mt9t013_liteon.c: i2c probe ok
  348. <6>[1, swapper] [ 3.741248] mt9t013_liteon.c: mt9t013_liteon chipid = 0x2600
  349. <6>[1, swapper] [ 3.808999] mt9t013_liteon.c: mt9t013_liteon mode_id = 0xfff2
  350. <6>[1, swapper] [ 3.861874] ov7690.c: i2c probe ok
  351. <6>[1, swapper] [ 4.020961] ov7690.c: ov7690 model_id = 0x76
  352. <6>[1, swapper] [ 4.024136] rs30000048:00010000 rs30000048:00010000: setting system clock to 2012-01-24 15:27:31 UTC (1327418851)
  353. <6>[1, swapper] [ 4.026333] Freeing init memory: 300K
  354. <4>[1, swapper] [ 4.026428] Warning: unable to open an initial console.
  355. <4>[199, kmmcd] [ 4.043676] mmc0: host does not support reading read-only switch. assuming write-enable.
  356. <6>[199, kmmcd] [ 4.043726] mmc0: new high speed SDHC card at address 1234
  357. <6>[199, kmmcd] [ 4.046616] mmcblk0: mmc0:1234 SA08G 7.41 GiB
  358. <6>[199, kmmcd] [ 4.046981] mmcblk0: p1 p2 p3
  359. <3>[1, init] [ 4.488876] init: cannot open '/initlogo.rle'
  360. <6>[1, init] [ 4.562983] yaffs: dev is 32505860 name is "mtdblock4"
  361. <6>[1, init] [ 4.563009] yaffs: passed flags ""
  362. <4>[1, init] [ 4.563029] yaffs: Attempting MTD mount on 31.4, "mtdblock4"
  363. <4>[1, init] [ 4.714474] yaffs: restored from checkpoint
  364. <4>[1, init] [ 4.714559] yaffs_read_super: isCheckpointed 1
  365. <6>[1, init] [ 4.715281] yaffs: dev is 32505862 name is "mtdblock6"
  366. <6>[1, init] [ 4.715306] yaffs: passed flags ""
  367. <4>[1, init] [ 4.715324] yaffs: Attempting MTD mount on 31.6, "mtdblock6"
  368. <4>[1, init] [ 5.413951] block 1608 is bad
  369. <4>[1, init] [ 15.966919] yaffs_read_super: isCheckpointed 0
  370. <6>[1, init] [ 16.017424] yaffs: dev is 32505861 name is "mtdblock5"
  371. <6>[1, init] [ 16.017453] yaffs: passed flags ""
  372. <4>[1, init] [ 16.017469] yaffs: Attempting MTD mount on 31.5, "mtdblock5"
  373. <4>[1, init] [ 16.025913] yaffs: restored from checkpoint
  374. <4>[1, init] [ 16.025991] yaffs_read_super: isCheckpointed 1
  375. <3>[1, init] [ 17.008773] init: service 'console' requires console
  376. <3>[1, init] [ 17.405566] init: cannot find '/system/bin/port-bridge', disabling 'port-bridge'
  377. <6>[1188, qmuxd] [ 17.497489] SMD: ch 38 CLOSED -> OPENING
  378. <6>[1188, qmuxd] [ 17.497594] SMD: ch 38 OPENING -> OPENED
  379. <6>[1188, qmuxd] [ 17.518618] SMD: ch 39 CLOSED -> OPENING
  380. <6>[1188, qmuxd] [ 17.518711] SMD: ch 39 OPENING -> OPENED
  381. <6>[1188, qmuxd] [ 17.527118] SMD: ch 40 CLOSED -> OPENING
  382. <6>[1193, oem_rpc_svc] [ 17.527241] SMD: ch 40 OPENING -> OPENED
  383. <6>[1161, rild] [ 17.578856] warning: `rild' uses 32-bit capabilities (legacy support in use)
  384. <3>[1, init] [ 17.584634] init: cannot find '/system/bin/syncsdr', disabling 'syncsdr'
  385. <3>[1, init] [ 17.800064] init: untracked pid 1151 exited
  386. <6>[1218, adbd] [ 17.811389] enabling adb function
  387. <6>[1218, adbd] [ 17.811438] usb_function_enable: name = adb, enable = 1
  388. <3>[1218, adbd] [ 17.811459] usb_function_enable: function (adb) state is same
  389. <3>[1, init] [ 17.992364] init: untracked pid 1234 exited
  390. <4>[1252, busybox] [ 18.490796] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
  391. <6>[1251, modprobe] [ 18.669613] ramzswap: num_devices not specified. Using default: 1
  392. <6>[1260, rzscontrol] [ 18.702013] ramzswap: /dev/ramzswap0 initialized: disksize_kb=61712<6>Adding 61704k swap on /dev/block/ramzswap0. Priority:-1 extents:1 across:61704k SS
  393. <6>[1275, busybox] [ 19.524153] Adding 31032k swap on /dev/block/mmcblk0p3. Priority:-2 extents:1 across:31032k SS
  394. <3>[1166, mediaserver] [ 20.546126] snd_ioctl unknown command.
  395. <3>[1166, mediaserver] [ 20.546174] snd_ioctl unknown command.
  396. <6>[1166, mediaserver] [ 20.547056] snd_set_volume 0 0 7
  397. <6>[1166, mediaserver] [ 20.548556] snd_set_volume 6 0 7
  398. <6>[1166, mediaserver] [ 20.560364] snd_set_volume 12 0 7
  399. <6>[1166, mediaserver] [ 20.561453] snd_set_volume 3 0 7
  400. <6>[1166, mediaserver] [ 20.562578] snd_set_volume 16 0 7
  401. <6>[1166, mediaserver] [ 20.563513] snd_set_volume 25 0 7
  402. <4>[266, krpcserversd] [ 20.632663] ######### report_hs_key ###### -1
  403. <3>[266, krpcserversd] [ 20.632699] report_hs_key: No mapping for remote handset event 156
  404. <6>[1303, Playback Thread] [ 20.653511] snd_set_device 6 1 1
  405. <6>[1302, ApmCommandThrea] [ 20.660838] snd_set_volume 29 0 7
  406. <3>[1, init] [ 20.792169] init: untracked pid 1307 exited
  407. <3>[1, init] [ 20.823394] init: untracked pid 1311 exited
  408. <4>[1326, sync] [ 21.668066] save exit: isCheckpointed 1
  409. <4>[1326, sync] [ 21.679718] save exit: isCheckpointed 1
  410. <3>[1, init] [ 21.732763] init: untracked pid 1093 exited
  411. <6>[1353, BootAnimation] [ 32.165029] hw3d_open: pid 1348 tid 1353 opening client node
  412. <4>[1353, BootAnimation] [ 32.166086] remapping device 3b3
  413. <6>[1337, Binder Thread #] [ 32.214559] hw3d_open: pid 1331 tid 1337 opening master node
  414. <6>[1338, SurfaceFlinger] [ 39.698041] mdp_get_lcd_line_counter: mdp_lcd_rd_cnt >= mfd->total_lcd_lines error!
  415. <4>[1347, er.ServerThread] [ 49.765988] vibrator_enable
  416. <4>[1347, er.ServerThread] [ 52.787929] vibrator_enable
  417. <4>[1387, Thread-37] [ 52.795796] vibrator_enable
  418. <4>[1387, Thread-37] [ 52.817509] vibrator_enable
  419. <6>[1347, er.ServerThread] [ 53.148566] request_suspend_state: wakeup (3->0) at 53148028416 (2012-01-24 15:28:20.624433351 UTC)
  420. <6>[1353, BootAnimation] [ 67.919234] hw3d_release: in release for pid=1348 tid=1353
  421. <6>[1338, SurfaceFlinger] [ 74.551311] mdp_get_lcd_line_counter: mdp_lcd_rd_cnt >= mfd->total_lcd_lines error!
  422. <6>[1362, PowerManagerSer] [ 127.965021] request_suspend_state: sleep (0->3) at 127964485063 (2012-01-24 15:29:35.440889998 UTC)
  423. <6>[10, suspend] [ 127.965093] early_suspend: call handlers
  424. <4>[10, suspend] [ 127.968268] s: c01f1014
  425. <4>[10, suspend] [ 127.968351] s: c0276c78
  426. <4>[10, suspend] [ 127.969071] s: c0278f90
  427. <4>[10, suspend] [ 127.999156] s: c0286f84
  428. <4>[1347, er.ServerThread] [ 128.031858] vibrator_enable
  429. <4>[10, suspend] [ 128.270969] s: c00c19f8
  430. <4>[10, suspend] [ 128.606038] s: c01defac
  431. <4>[10, suspend] [ 128.606086] s: c01e15e4
  432. <4>[10, suspend] [ 128.606104] s: c00896cc
  433. <4>[10, suspend] [ 128.606336] s: c01ec448
  434. <6>[10, suspend] [ 128.606353] early_suspend: sync
  435. <4>[10, suspend] [ 128.671556] save exit: isCheckpointed 1
  436. <6>[10, suspend] [ 128.680496] PM: Syncing filesystems ... done.
  437. <4>[10, suspend] [ 128.685146] Freezing user space processes ... (elapsed 0.00 seconds) done.
  438. <4>[10, suspend] [ 128.693733] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
  439. <4>[10, suspend] [ 128.694171] Suspending console(s) (use no_console_suspend to debug)
  440. <6>[10, suspend] [ 128.703968] usb_platform_suspend: we are already in lpm, nothing to be done
  441. <6>[10, suspend] [ 128.703968] wakeup wake lock: SMD_RPCCALL
  442. <4>[266, krpcserversd] [ 128.704289] ######### report_hs_key ###### 107
  443. <6>[10, suspend] [ 128.801304] hw3d_resume: resuming
  444. <4>[10, suspend] [ 128.804726] Restarting tasks ... done.
  445. <6>[10, suspend] [ 128.874544] suspend: exit suspend, ret = 0 (2012-01-24 15:30:35.570703335 UTC)
  446. <4>[266, krpcserversd] [ 128.896428] ######### report_hs_key ###### 107
  447. <6>[1365, WindowManagerPo] [ 128.900296] request_suspend_state: wakeup (3->0) at 128900520081 (2012-01-24 15:30:35.596446670 UTC)
  448. <6>[10, suspend] [ 128.902876] late_resume: call handlers
  449. <4>[10, suspend] [ 128.903021] r: c01ec1f0
  450. <4>[10, suspend] [ 128.903044] r: c008921c
  451. <4>[10, suspend] [ 128.904304] prim_init:1
  452. <6>[10, suspend] [ 128.904531] stop2normal start
  453. <6>[10, suspend] [ 128.920083] stop2normal resume end
  454. <6>[10, suspend] [ 129.414919] Panel state (4)
  455. <6>[10, suspend] [ 129.998208] state_end (0)
  456. <4>[10, suspend] [ 130.236418] prim_init_end:3
  457. <4>[10, suspend] [ 130.236466] r: c01df580
  458. <4>[10, suspend] [ 130.255926] r: c00c19a0
  459. <4>[10, suspend] [ 130.270181] r: c0286f10
  460. <4>[10, suspend] [ 130.271029] r: c0278768
  461. <4>[10, suspend] [ 130.481058] r: c0276c10
  462. <4>[10, suspend] [ 130.484184] r: c01f0f64
  463. <6>[10, suspend] [ 130.484199] late_resume: done
  464. <6>[1267, rild] [ 148.934208] rmnet_open()
  465. <6>[1267, rild] [ 148.934261] SMD: ch 11 CLOSED -> OPENING
  466. <6>[1267, rild] [ 148.934389] SMD: ch 11 OPENING -> OPENED
  467. <7>[1428, d.process.acore] [ 159.749846] rmnet0: no IPv6 routers present
  468. <6>[1362, PowerManagerSer] [ 197.107036] request_suspend_state: sleep (0->3) at 197107251755 (2012-01-24 15:31:43.803178345 UTC)
  469. <6>[10, suspend] [ 197.107158] early_suspend: call handlers
  470. <4>[10, suspend] [ 197.110339] s: c01f1014
  471. <4>[10, suspend] [ 197.110441] s: c0276c78
  472. <4>[10, suspend] [ 197.111229] s: c0278f90
  473. <4>[10, suspend] [ 197.139989] s: c0286f84
  474. <4>[1347, er.ServerThread] [ 197.195743] vibrator_enable
  475. <4>[10, suspend] [ 197.274059] s: c00c19f8
  476. <4>[10, suspend] [ 197.792644] s: c01defac
  477. <4>[10, suspend] [ 197.792691] s: c01e15e4
  478. <4>[10, suspend] [ 197.792709] s: c00896cc
  479. <4>[10, suspend] [ 197.792924] s: c01ec448
  480. <6>[10, suspend] [ 197.792941] early_suspend: sync
  481. <4>[10, suspend] [ 197.853454] save exit: isCheckpointed 1
  482. <6>[10, suspend] [ 197.861359] PM: Syncing filesystems ... done.
  483. <4>[10, suspend] [ 197.865371] Freezing user space processes ... (elapsed 0.00 seconds) done.
  484. <4>[10, suspend] [ 197.873449] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
  485. <4>[10, suspend] [ 197.873848] Suspending console(s) (use no_console_suspend to debug)
  486. <6>[10, suspend] [ 197.883184] usb_platform_suspend: we are already in lpm, nothing to be done
  487. <6>[0, swapper] [ 197.885213] wakeup wake lock: SMD_RPCCALL
  488. <6>[10, suspend] [ 197.965754] hw3d_resume: resuming
  489. <4>[10, suspend] [ 197.968891] Restarting tasks ... done.
  490. <6>[10, suspend] [ 198.024086] suspend: exit suspend, ret = 0 (2012-01-24 15:31:44.720836692 UTC)
  491. <4>[10, suspend] [ 198.589846] save exit: isCheckpointed 1
  492. <6>[10, suspend] [ 198.594421] PM: Syncing filesystems ... done.
  493. <4>[10, suspend] [ 198.598961] Freezing user space processes ... (elapsed 0.00 seconds) done.
  494. <4>[10, suspend] [ 198.608724] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
  495. <4>[10, suspend] [ 198.609289] Suspending console(s) (use no_console_suspend to debug)
  496. <6>[10, suspend] [ 198.619291] usb_platform_suspend: we are already in lpm, nothing to be done
  497. <6>[0, swapper] [ 198.619786] get_smem_clock: invalid start state 10d29 clock 8752570
  498. <6>[0, swapper] [ 198.623509] wakeup wake lock: SMD_RPCCALL
  499. <4>[10, suspend] [ 198.713709] Restarting tasks ... done.
  500. <6>[10, suspend] [ 198.829026] suspend: exit suspend, ret = 0 (2012-01-24 15:31:46.616943338 UTC)
  501. <4>[10, suspend] [ 199.894809] save exit: isCheckpointed 1
  502. <6>[10, suspend] [ 199.903538] PM: Syncing filesystems ... done.
  503. <4>[10, suspend] [ 199.912558] Freezing user space processes ... (elapsed 0.01 seconds) done.
  504. <4>[10, suspend] [ 199.930029] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
  505. <4>[10, suspend] [ 199.930923] Suspending console(s) (use no_console_suspend to debug)
  506. <3>[10, suspend] [ 199.939473] pm_op(): platform_pm_suspend+0x0/0x58 returns -16
  507. <3>[10, suspend] [ 199.939546] PM: Device alarm failed to suspend: error -16
  508. <3>[10, suspend] [ 199.939593] PM: Some devices failed to suspend
  509. <4>[10, suspend] [ 199.941738] Restarting tasks ... done.
  510. <6>[10, suspend] [ 199.983916] suspend: exit suspend, ret = -16 (2012-01-24 15:31:47.771828349 UTC)
  511. <4>[10, suspend] [ 201.508606] save exit: isCheckpointed 1
  512. <6>[10, suspend] [ 201.512351] PM: Syncing filesystems ... done.
  513. <4>[10, suspend] [ 201.516213] Freezing user space processes ... (elapsed 0.00 seconds) done.
  514. <4>[10, suspend] [ 201.525694] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
  515. <4>[10, suspend] [ 201.526089] Suspending console(s) (use no_console_suspend to debug)
  516. <6>[10, suspend] [ 201.533506] usb_platform_suspend: we are already in lpm, nothing to be done
  517. <6>[0, swapper] [ 201.535816] wakeup wake lock: SMD_RPCCALL
  518. <4>[10, suspend] [ 201.634976] Restarting tasks ... done.
  519. <6>[10, suspend] [ 201.856489] suspend: exit suspend, ret = 0 (2012-01-24 15:31:52.722248342 UTC)
  520. <4>[10, suspend] [ 202.763009] save exit: isCheckpointed 1
  521. <6>[10, suspend] [ 202.797653] PM: Syncing filesystems ... done.
  522. <4>[10, suspend] [ 202.801654] Freezing user space processes ... (elapsed 0.00 seconds) done.
  523. <4>[10, suspend] [ 202.809328] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
  524. <4>[10, suspend] [ 202.809714] Suspending console(s) (use no_console_suspend to debug)
  525. <6>[10, suspend] [ 202.817354] usb_platform_suspend: we are already in lpm, nothing to be done
  526. <6>[0, swapper] [ 202.819456] wakeup wake lock: SMD_RPCCALL
  527. <4>[10, suspend] [ 202.917639] Restarting tasks ... done.
  528. <6>[10, suspend] [ 202.997001] suspend: exit suspend, ret = 0 (2012-01-24 15:33:14.580275002 UTC)
  529. <4>[266, krpcserversd] [ 203.200411] ######### report_hs_key ###### 107
  530. <6>[1365, WindowManagerPo] [ 203.207631] request_suspend_state: wakeup (3->0) at 203210433512 (2012-01-24 15:33:14.790893346 UTC)
  531. <6>[10, suspend] [ 203.209624] late_resume: call handlers
  532. <4>[10, suspend] [ 203.209756] r: c01ec1f0
  533. <4>[10, suspend] [ 203.209776] r: c008921c
  534. <4>[10, suspend] [ 203.210999] prim_init:1
  535. <6>[10, suspend] [ 203.211178] stop2normal start
  536. <6>[10, suspend] [ 203.224619] stop2normal resume end
  537. <4>[266, krpcserversd] [ 203.474218] ######### report_hs_key ###### 107
  538. <6>[10, suspend] [ 203.584198] Panel state (4)
  539. <6>[10, suspend] [ 204.197961] state_end (0)
  540. <4>[10, suspend] [ 204.432301] prim_init_end:3
  541. <4>[10, suspend] [ 204.432349] r: c01df580
  542. <4>[10, suspend] [ 204.451816] r: c00c19a0
  543. <4>[10, suspend] [ 204.468171] r: c0286f10
  544. <4>[10, suspend] [ 204.468989] r: c0278768
  545. <4>[10, suspend] [ 204.677334] r: c0276c10
  546. <4>[10, suspend] [ 204.680473] r: c01f0f64
  547. <6>[10, suspend] [ 204.680489] late_resume: done
  548. <4>[1552, Binder Thread #] [ 240.651269] vibrator_enable
  549. <4>[2114, Thread-62] [ 240.668874] vibrator_enable
  550. <4>[1336, Binder Thread #] [ 242.657831] vibrator_enable
  551. <4>[1337, Binder Thread #] [ 242.659798] vibrator_enable
  552. <4>[2115, Thread-63] [ 242.699021] vibrator_enable
  553. <4>[1409, Binder Thread #] [ 243.434411] vibrator_enable
  554. <4>[1410, Binder Thread #] [ 243.439618] vibrator_enable
  555. <6>[1338, SurfaceFlinger] [ 243.470376] mdp_get_lcd_line_counter: mdp_lcd_rd_cnt >= mfd->total_lcd_lines error!
  556. <4>[2116, Thread-64] [ 243.477148] vibrator_enable
  557. <4>[1337, Binder Thread #] [ 244.241953] vibrator_enable
  558. <4>[1552, Binder Thread #] [ 244.244726] vibrator_enable
  559. <4>[2117, Thread-65] [ 244.277521] vibrator_enable
  560. <4>[1331, system_server] [ 245.124013] vibrator_enable
  561. <4>[2004, Binder Thread #] [ 245.126953] vibrator_enable
  562. <4>[2118, Thread-66] [ 245.155118] vibrator_enable
  563. <4>[1336, Binder Thread #] [ 249.222569] vibrator_enable
  564. <4>[1556, Binder Thread #] [ 249.224488] vibrator_enable
  565. <4>[2119, Thread-67] [ 249.313673] vibrator_enable
  566. <4>[1336, Binder Thread #] [ 250.501418] vibrator_enable
  567. <4>[1406, Binder Thread #] [ 250.503241] vibrator_enable
  568. <4>[2120, Thread-68] [ 250.542511] vibrator_enable
  569. <4>[1553, Binder Thread #] [ 251.930178] vibrator_enable
  570. <4>[2003, Binder Thread #] [ 251.932581] vibrator_enable
  571. <4>[2121, Thread-69] [ 251.960899] vibrator_enable
  572. <4>[1552, Binder Thread #] [ 253.136278] vibrator_enable
  573. <4>[1331, system_server] [ 253.138281] vibrator_enable
  574. <4>[2122, Thread-70] [ 253.196383] vibrator_enable
  575. <4>[2004, Binder Thread #] [ 253.913711] vibrator_enable
  576. <4>[1336, Binder Thread #] [ 253.916923] vibrator_enable
  577. <4>[2123, Thread-71] [ 253.968413] vibrator_enable
  578. <4>[1336, Binder Thread #] [ 300.435938] vibrator_enable
  579. <4>[1406, Binder Thread #] [ 300.437979] vibrator_enable
  580. <4>[2136, Thread-72] [ 300.476319] vibrator_enable
  581. <4>[1406, Binder Thread #] [ 303.432919] vibrator_enable
  582. <4>[1553, Binder Thread #] [ 303.434953] vibrator_enable
  583. <4>[2137, Thread-73] [ 303.454946] vibrator_enable
  584. <4>[1331, system_server] [ 304.423668] vibrator_enable
  585. <4>[2003, Binder Thread #] [ 304.426688] vibrator_enable
  586. <4>[2138, Thread-74] [ 304.446079] vibrator_enable
  587. <4>[2004, Binder Thread #] [ 306.009098] vibrator_enable
  588. <4>[1408, Binder Thread #] [ 306.010956] vibrator_enable
  589. <4>[2139, Thread-75] [ 306.064184] vibrator_enable
  590. <4>[1553, Binder Thread #] [ 306.358313] vibrator_enable
  591. <4>[1331, system_server] [ 306.360893] vibrator_enable
  592. <4>[2140, Thread-76] [ 306.390234] vibrator_enable
  593. <4>[1552, Binder Thread #] [ 306.872168] vibrator_enable
  594. <4>[1336, Binder Thread #] [ 306.874224] vibrator_enable
  595. <4>[2141, Thread-77] [ 306.903989] vibrator_enable
  596. <4>[1409, Binder Thread #] [ 308.750818] vibrator_enable
  597. <4>[1408, Binder Thread #] [ 308.752661] vibrator_enable
  598. <4>[2142, Thread-78] [ 308.839824] vibrator_enable
  599. <4>[1410, Binder Thread #] [ 315.169483] vibrator_enable
  600. <4>[1556, Binder Thread #] [ 315.171361] vibrator_enable
  601. <4>[2143, Thread-79] [ 315.199188] vibrator_enable
  602. <4>[1410, Binder Thread #] [ 315.993903] vibrator_enable
  603. <4>[1409, Binder Thread #] [ 315.995988] vibrator_enable
  604. <4>[2144, Thread-80] [ 316.038406] vibrator_enable
  605. <4>[1553, Binder Thread #] [ 322.151051] vibrator_enable
  606. <4>[1331, system_server] [ 322.153514] vibrator_enable
  607. <4>[2145, Thread-81] [ 322.211404] vibrator_enable
  608. <4>[2004, Binder Thread #] [ 323.510096] vibrator_enable
  609. <4>[1336, Binder Thread #] [ 323.512731] vibrator_enable
  610. <4>[2146, Thread-82] [ 323.538374] vibrator_enable
  611. <4>[1336, Binder Thread #] [ 324.087921] vibrator_enable
  612. <4>[2003, Binder Thread #] [ 324.090714] vibrator_enable
  613. <4>[2147, Thread-83] [ 324.118736] vibrator_enable
  614. <4>[1331, system_server] [ 325.727796] vibrator_enable
  615. <4>[1406, Binder Thread #] [ 325.729701] vibrator_enable
  616. <4>[2154, Thread-84] [ 325.775488] vibrator_enable
  617. <4>[2004, Binder Thread #] [ 327.035538] vibrator_enable
  618. <4>[1336, Binder Thread #] [ 327.038293] vibrator_enable
  619. <4>[2155, Thread-85] [ 327.068113] vibrator_enable
  620. <4>[2003, Binder Thread #] [ 327.386578] vibrator_enable
  621. <4>[1337, Binder Thread #] [ 327.389454] vibrator_enable
  622. <4>[2156, Thread-86] [ 327.419669] vibrator_enable
  623. <4>[1553, Binder Thread #] [ 328.412049] vibrator_enable
  624. <4>[1336, Binder Thread #] [ 328.427336] vibrator_enable
  625. <4>[2157, Thread-87] [ 328.498268] vibrator_enable
  626. <4>[2003, Binder Thread #] [ 329.997826] vibrator_enable
  627. <4>[1337, Binder Thread #] [ 329.999674] vibrator_enable
  628. <4>[2158, Thread-88] [ 330.051418] vibrator_enable
  629. <4>[1331, system_server] [ 332.155913] vibrator_enable
  630. <4>[1553, Binder Thread #] [ 332.158256] vibrator_enable
  631. <4>[2159, Thread-89] [ 332.191564] vibrator_enable
  632. <4>[1336, Binder Thread #] [ 332.604396] vibrator_enable
  633. <4>[1556, Binder Thread #] [ 332.607038] vibrator_enable
  634. <4>[2160, Thread-90] [ 332.633314] vibrator_enable
  635. <4>[1552, Binder Thread #] [ 333.477278] vibrator_enable
  636. <4>[1553, Binder Thread #] [ 333.481416] vibrator_enable
  637. <4>[2161, Thread-91] [ 333.513756] vibrator_enable
  638. <4>[2003, Binder Thread #] [ 337.406158] vibrator_enable
  639. <4>[1410, Binder Thread #] [ 337.408638] vibrator_enable
  640. <4>[2162, Thread-92] [ 337.463563] vibrator_enable
  641. <4>[1410, Binder Thread #] [ 340.284696] vibrator_enable
  642. <4>[1408, Binder Thread #] [ 340.286538] vibrator_enable
  643. <4>[2163, Thread-93] [ 340.346819] vibrator_enable
  644. <4>[1337, Binder Thread #] [ 342.307493] vibrator_enable
  645. <4>[2004, Binder Thread #] [ 342.309589] vibrator_enable
  646. <4>[2164, Thread-94] [ 342.334949] vibrator_enable
  647. <4>[1406, Binder Thread #] [ 343.389506] vibrator_enable
  648. <4>[1408, Binder Thread #] [ 343.391889] vibrator_enable
  649. <4>[2165, Thread-95] [ 343.416764] vibrator_enable
  650. <4>[1337, Binder Thread #] [ 347.893126] vibrator_enable
  651. <4>[2004, Binder Thread #] [ 347.895614] vibrator_enable
  652. <4>[2166, Thread-96] [ 347.941903] vibrator_enable
  653. <4>[1337, Binder Thread #] [ 349.480884] vibrator_enable
  654. <4>[2003, Binder Thread #] [ 349.482754] vibrator_enable
  655. <4>[2167, Thread-97] [ 349.518903] vibrator_enable
  656. <4>[1552, Binder Thread #] [ 354.885909] vibrator_enable
  657. <4>[2004, Binder Thread #] [ 354.887934] vibrator_enable
  658. <4>[2169, Thread-98] [ 355.031026] vibrator_enable
  659. <4>[1406, Binder Thread #] [ 359.628141] vibrator_enable
  660. <4>[1408, Binder Thread #] [ 359.630039] vibrator_enable
  661. <4>[2175, Thread-99] [ 359.677786] vibrator_enable
  662. <4>[1409, Binder Thread #] [ 360.053941] vibrator_enable
  663. <4>[2004, Binder Thread #] [ 360.056059] vibrator_enable
  664. <4>[2176, Thread-100] [ 360.085184] vibrator_enable
  665. <4>[1336, Binder Thread #] [ 361.056019] vibrator_enable
  666. <4>[2003, Binder Thread #] [ 361.058758] vibrator_enable
  667. <4>[2177, Thread-101] [ 361.089583] vibrator_enable
  668. <4>[1556, Binder Thread #] [ 361.311606] vibrator_enable
  669. <4>[1552, Binder Thread #] [ 361.313686] vibrator_enable
  670. <4>[2178, Thread-102] [ 361.343543] vibrator_enable
  671. <4>[1408, Binder Thread #] [ 362.191586] vibrator_enable
  672. <4>[1553, Binder Thread #] [ 362.194518] vibrator_enable
  673. <4>[2179, Thread-103] [ 362.224161] vibrator_enable
  674. <4>[1337, Binder Thread #] [ 362.664818] vibrator_enable
  675. <4>[1406, Binder Thread #] [ 362.672446] vibrator_enable
  676. <4>[2180, Thread-104] [ 362.705121] vibrator_enable
  677. <4>[1336, Binder Thread #] [ 366.136061] vibrator_enable
  678. <4>[2003, Binder Thread #] [ 366.138414] vibrator_enable
  679. <4>[2181, Thread-105] [ 366.176563] vibrator_enable
  680. <4>[2004, Binder Thread #] [ 367.473148] vibrator_enable
  681. <4>[1331, system_server] [ 367.475001] vibrator_enable
  682. <4>[2182, Thread-106] [ 367.522979] vibrator_enable
  683. <4>[1556, Binder Thread #] [ 368.023446] vibrator_enable
  684. <4>[1552, Binder Thread #] [ 368.026283] vibrator_enable
  685. <4>[2183, Thread-107] [ 368.053188] vibrator_enable
  686. <4>[1331, system_server] [ 369.727439] vibrator_enable
  687. <4>[2004, Binder Thread #] [ 369.729754] vibrator_enable
  688. <4>[2184, Thread-108] [ 369.782751] vibrator_enable
  689. <4>[1408, Binder Thread #] [ 385.705159] vibrator_enable
  690. <4>[2004, Binder Thread #] [ 385.707736] vibrator_enable
  691. <4>[2191, Thread-109] [ 385.758074] vibrator_enable
  692. <4>[1553, Binder Thread #] [ 392.365576] vibrator_enable
  693. <4>[1409, Binder Thread #] [ 392.367524] vibrator_enable
  694. <4>[2192, Thread-110] [ 392.412721] vibrator_enable
  695. <4>[2004, Binder Thread #] [ 396.570409] vibrator_enable
  696. <4>[1556, Binder Thread #] [ 396.572731] vibrator_enable
  697. <4>[2193, Thread-111] [ 396.621328] vibrator_enable
  698. <4>[1406, Binder Thread #] [ 399.752266] vibrator_enable
  699. <4>[1336, Binder Thread #] [ 399.754654] vibrator_enable
  700. <4>[2194, Thread-112] [ 399.802939] vibrator_enable
  701. <4>[1331, system_server] [ 402.509659] vibrator_enable
  702. <4>[1410, Binder Thread #] [ 402.512081] vibrator_enable
  703. <4>[2195, Thread-113] [ 402.539753] vibrator_enable
  704. <4>[1553, Binder Thread #] [ 403.775548] vibrator_enable
  705. <4>[1336, Binder Thread #] [ 403.777989] vibrator_enable
  706. <4>[2196, Thread-114] [ 403.803218] vibrator_enable
  707. <4>[2004, Binder Thread #] [ 406.106204] vibrator_enable
  708. <4>[1552, Binder Thread #] [ 406.111559] vibrator_enable
  709. <4>[2197, Thread-115] [ 406.138654] vibrator_enable
  710. <4>[2003, Binder Thread #] [ 408.450729] vibrator_enable
  711. <4>[1337, Binder Thread #] [ 408.452626] vibrator_enable
  712. <4>[2198, Thread-116] [ 408.522481] vibrator_enable
  713. <4>[1337, Binder Thread #] [ 409.428308] vibrator_enable
  714. <4>[2003, Binder Thread #] [ 409.430178] vibrator_enable
  715. <4>[2199, Thread-117] [ 409.482356] vibrator_enable
  716. <4>[1410, Binder Thread #] [ 410.216734] vibrator_enable
  717. <4>[1553, Binder Thread #] [ 410.219561] vibrator_enable
  718. <4>[2200, Thread-118] [ 410.244988] vibrator_enable
  719. <4>[1556, Binder Thread #] [ 412.644066] vibrator_enable
  720. <4>[1406, Binder Thread #] [ 412.646949] vibrator_enable
  721. <4>[2201, Thread-119] [ 412.666159] vibrator_enable
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!