API tools faq
paste
Advertisement
Guest User

orangepi3b_wifi_fail

a guest
Oct 23rd, 2023
121
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 179.57 KB | Fixit | 0 0
raw download clone embed print report
  1. 1
  2. 2 ### Activated 1 lzo-rle zram swap devices with 957MB each.
  3. 3 ### Activated Armbian ramlog partition with zstd compression
  4. 4
  5. 5 Sun Oct 22 09:53:50 PM UTC 2023 | orangepi3b | 23.8.2 | arm64 | aarch64 | 6.5.2-edge-rockchip64
  6. 6
  7. 7 ### dmesg:
  8. 8
  9. 9 [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
  10. 10 [ 0.000000] Linux version 6.5.2-edge-rockchip64 (armbian@next) (aarch64-linux-gnu-gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #1 SMP PREEMPT Wed Sep 6 20:22:26 UTC 2023
  11. 11 [ 0.000000] Machine model: Rockchip RK3566 OPi 3B
  12. 12 [ 0.000000] efi: UEFI not found.
  13. 13 [ 0.000000] NUMA: No NUMA configuration found
  14. 14 [ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x000000007fffffff]
  15. 15 [ 0.000000] NUMA: NODE_DATA [mem 0x7fb669c0-0x7fb68fff]
  16. 16 [ 0.000000] Zone ranges:
  17. 17 [ 0.000000] DMA [mem 0x0000000000200000-0x000000007fffffff]
  18. 18 [ 0.000000] DMA32 empty
  19. 19 [ 0.000000] Normal empty
  20. 20 [ 0.000000] Movable zone start for each node
  21. 21 [ 0.000000] Early memory node ranges
  22. 22 [ 0.000000] node 0: [mem 0x0000000000200000-0x000000007fffffff]
  23. 23 [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
  24. 24 [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
  25. 25 [ 0.000000] cma: Reserved 128 MiB at 0x0000000075a00000
  26. 26 [ 0.000000] psci: probing for conduit method from DT.
  27. 27 [ 0.000000] psci: PSCIv1.1 detected in firmware.
  28. 28 [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  29. 29 [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  30. 30 [ 0.000000] psci: SMC Calling Convention v1.2
  31. 31 [ 0.000000] percpu: Embedded 31 pages/cpu s87272 r8192 d31512 u126976
  32. 32 [ 0.000000] pcpu-alloc: s87272 r8192 d31512 u126976 alloc=31*4096
  33. 33 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  34. 34 [ 0.000000] Detected VIPT I-cache on CPU0
  35. 35 [ 0.000000] CPU features: detected: GIC system register CPU interface
  36. 36 [ 0.000000] CPU features: detected: Virtualization Host Extensions
  37. 37 [ 0.000000] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807, 2441009
  38. 38 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
  39. 39 [ 0.000000] alternatives: applying boot alternatives
  40. 40 [ 0.000000] Kernel command line: root=UUID=50b1c2a8-fc2a-47b5-a6f0-3ea23edcd51d rootwait rootfstype=ext4 splash=verbose console=ttyS2,1500000 console=tty1 consoleblank=0 loglevel=1 ubootpart=eb6fb04d-3b7c-5049-9565-0ed2b9f9720e usb-storage.quirks= cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
  41. 41 [ 0.000000] The swapaccount= commandline option is deprecated. Please report your usecase to linux-mm@kvack.org if you depend on this functionality.
  42. 42 [ 0.000000] Unknown kernel command line parameters "splash=verbose ubootpart=eb6fb04d-3b7c-5049-9565-0ed2b9f9720e cgroup_enable=memory cgroup_memory=1", will be passed to user space.
  43. 43 [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  44. 44 [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
  45. 45 [ 0.000000] Fallback order for Node 0: 0
  46. 46 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 515592
  47. 47 [ 0.000000] Policy zone: DMA
  48. 48 [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
  49. 49 [ 0.000000] software IO TLB: area num 4.
  50. 50 [ 0.000000] software IO TLB: mapped [mem 0x0000000071700000-0x0000000075700000] (64MB)
  51. 51 [ 0.000000] Memory: 1804464K/2095104K available (16832K kernel code, 2296K rwdata, 6264K rodata, 4608K init, 585K bss, 159568K reserved, 131072K cma-reserved)
  52. 52 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  53. 53 [ 0.000000] trace event string verifier disabled
  54. 54 [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  55. 55 [ 0.000000] rcu: RCU event tracing is enabled.
  56. 56 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
  57. 57 [ 0.000000] Trampoline variant of Tasks RCU enabled.
  58. 58 [ 0.000000] Tracing variant of Tasks RCU enabled.
  59. 59 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  60. 60 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  61. 61 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  62. 62 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  63. 63 [ 0.000000] GICv3: 320 SPIs implemented
  64. 64 [ 0.000000] GICv3: 0 Extended SPIs implemented
  65. 65 [ 0.000000] GICv3: MBI range [296:319]
  66. 66 [ 0.000000] GICv3: Using MBI frame 0x00000000fd410000
  67. 67 [ 0.000000] Root IRQ handler: gic_handle_irq
  68. 68 [ 0.000000] GICv3: GICv3 features: 16 PPIs
  69. 69 [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000
  70. 70 [ 0.000000] ITS: No ITS available, not enabling LPIs
  71. 71 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  72. 72 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  73. 73 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  74. 74 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  75. 75 [ 0.001304] Console: colour dummy device 80x25
  76. 76 [ 0.001325] printk: console [tty1] enabled
  77. 77 [ 0.001514] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  78. 78 [ 0.001538] pid_max: default: 32768 minimum: 301
  79. 79 [ 0.001668] LSM: initializing lsm=capability,yama,apparmor,integrity
  80. 80 [ 0.001722] Yama: becoming mindful.
  81. 81 [ 0.001860] AppArmor: AppArmor initialized
  82. 82 [ 0.001917] stackdepot: allocating hash table of 131072 entries via kvcalloc
  83. 83 [ 0.002382] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
  84. 84 [ 0.002413] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
  85. 85 [ 0.004120] cacheinfo: Unable to detect cache hierarchy for CPU 0
  86. 86 [ 0.005741] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
  87. 87 [ 0.005924] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
  88. 88 [ 0.006352] rcu: Hierarchical SRCU implementation.
  89. 89 [ 0.006363] rcu: Max phase no-delay instances is 1000.
  90. 90 [ 0.010795] EFI services will not be available.
  91. 91 [ 0.011521] smp: Bringing up secondary CPUs ...
  92. 92 [ 0.012755] Detected VIPT I-cache on CPU1
  93. 93 [ 0.012850] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000
  94. 94 [ 0.012918] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
  95. 95 [ 0.014148] Detected VIPT I-cache on CPU2
  96. 96 [ 0.014230] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000
  97. 97 [ 0.014283] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
  98. 98 [ 0.015497] Detected VIPT I-cache on CPU3
  99. 99 [ 0.015575] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000
  100. 100 [ 0.015630] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
  101. 101 [ 0.015822] smp: Brought up 1 node, 4 CPUs
  102. 102 [ 0.015850] SMP: Total of 4 processors activated.
  103. 103 [ 0.015861] CPU features: detected: 32-bit EL0 Support
  104. 104 [ 0.015866] CPU features: detected: 32-bit EL1 Support
  105. 105 [ 0.015874] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
  106. 106 [ 0.015882] CPU features: detected: Common not Private translations
  107. 107 [ 0.015888] CPU features: detected: CRC32 instructions
  108. 108 [ 0.015899] CPU features: detected: RCpc load-acquire (LDAPR)
  109. 109 [ 0.015905] CPU features: detected: LSE atomic instructions
  110. 110 [ 0.015913] CPU features: detected: Privileged Access Never
  111. 111 [ 0.015918] CPU features: detected: RAS Extension Support
  112. 112 [ 0.015927] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
  113. 113 [ 0.016051] CPU: All CPU(s) started at EL2
  114. 114 [ 0.016061] alternatives: applying system-wide alternatives
  115. 115 [ 0.022486] devtmpfs: initialized
  116. 116 [ 0.051041] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  117. 117 [ 0.051111] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  118. 118 [ 0.055257] pinctrl core: initialized pinctrl subsystem
  119. 119 [ 0.056254] DMI not present or invalid.
  120. 120 [ 0.057285] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  121. 121 [ 0.059825] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
  122. 122 [ 0.061056] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  123. 123 [ 0.062266] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  124. 124 [ 0.062399] audit: initializing netlink subsys (disabled)
  125. 125 [ 0.062778] audit: type=2000 audit(0.060:1): state=initialized audit_enabled=0 res=1
  126. 126 [ 0.064200] thermal_sys: Registered thermal governor 'fair_share'
  127. 127 [ 0.064213] thermal_sys: Registered thermal governor 'bang_bang'
  128. 128 [ 0.064221] thermal_sys: Registered thermal governor 'step_wise'
  129. 129 [ 0.064228] thermal_sys: Registered thermal governor 'user_space'
  130. 130 [ 0.064319] cpuidle: using governor menu
  131. 131 [ 0.064841] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  132. 132 [ 0.065085] ASID allocator initialised with 65536 entries
  133. 133 [ 0.067255] Serial: AMBA PL011 UART driver
  134. 134 [ 0.087342] platform fe0a0000.hdmi: Fixed dependency cycle(s) with /vop@fe040000/ports/port@0/endpoint@2
  135. 135 [ 0.128896] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
  136. 136 [ 0.129592] rockchip-gpio fdd60000.gpio: probed /pinctrl/gpio@fdd60000
  137. 137 [ 0.130265] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
  138. 138 [ 0.130680] rockchip-gpio fe740000.gpio: probed /pinctrl/gpio@fe740000
  139. 139 [ 0.131276] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation.
  140. 140 [ 0.131693] rockchip-gpio fe750000.gpio: probed /pinctrl/gpio@fe750000
  141. 141 [ 0.132377] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation.
  142. 142 [ 0.132783] rockchip-gpio fe760000.gpio: probed /pinctrl/gpio@fe760000
  143. 143 [ 0.133357] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation.
  144. 144 [ 0.133771] rockchip-gpio fe770000.gpio: probed /pinctrl/gpio@fe770000
  145. 145 [ 0.137431] platform hdmi-con: Fixed dependency cycle(s) with /hdmi@fe0a0000/ports/port@1/endpoint
  146. 146 [ 0.144699] Modules: 25072 pages in range for non-PLT usage
  147. 147 [ 0.144719] Modules: 516592 pages in range for PLT usage
  148. 148 [ 0.146075] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
  149. 149 [ 0.146096] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
  150. 150 [ 0.146107] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
  151. 151 [ 0.146114] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
  152. 152 [ 0.146123] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
  153. 153 [ 0.146129] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
  154. 154 [ 0.146138] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
  155. 155 [ 0.146145] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
  156. 156 [ 0.147837] cryptd: max_cpu_qlen set to 1000
  157. 157 [ 0.217808] raid6: neonx8 gen() 1368 MB/s
  158. 158 [ 0.285938] raid6: neonx4 gen() 1412 MB/s
  159. 159 [ 0.354082] raid6: neonx2 gen() 1279 MB/s
  160. 160 [ 0.422240] raid6: neonx1 gen() 1036 MB/s
  161. 161 [ 0.490381] raid6: int64x8 gen() 912 MB/s
  162. 162 [ 0.558534] raid6: int64x4 gen() 1048 MB/s
  163. 163 [ 0.626665] raid6: int64x2 gen() 938 MB/s
  164. 164 [ 0.694829] raid6: int64x1 gen() 687 MB/s
  165. 165 [ 0.694840] raid6: using algorithm neonx4 gen() 1412 MB/s
  166. 166 [ 0.762964] raid6: .... xor() 1061 MB/s, rmw enabled
  167. 167 [ 0.762976] raid6: using neon recovery algorithm
  168. 168 [ 0.764729] iommu: Default domain type: Translated
  169. 169 [ 0.764748] iommu: DMA domain TLB invalidation policy: strict mode
  170. 170 [ 0.765452] SCSI subsystem initialized
  171. 171 [ 0.766527] libata version 3.00 loaded.
  172. 172 [ 0.767183] usbcore: registered new interface driver usbfs
  173. 173 [ 0.767266] usbcore: registered new interface driver hub
  174. 174 [ 0.767359] usbcore: registered new device driver usb
  175. 175 [ 0.768395] pps_core: LinuxPPS API ver. 1 registered
  176. 176 [ 0.768408] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  177. 177 [ 0.768443] PTP clock support registered
  178. 178 [ 0.768895] EDAC MC: Ver: 3.0.0
  179. 179 [ 0.769587] scmi_core: SCMI protocol bus registered
  180. 180 [ 0.771341] NetLabel: Initializing
  181. 181 [ 0.771355] NetLabel: domain hash size = 128
  182. 182 [ 0.771364] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  183. 183 [ 0.771468] NetLabel: unlabeled traffic allowed by default
  184. 184 [ 0.771768] vgaarb: loaded
  185. 185 [ 0.772617] clocksource: Switched to clocksource arch_sys_counter
  186. 186 [ 0.773352] VFS: Disk quotas dquot_6.6.0
  187. 187 [ 0.773436] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  188. 188 [ 0.774671] AppArmor: AppArmor Filesystem Enabled
  189. 189 [ 0.790943] NET: Registered PF_INET protocol family
  190. 190 [ 0.791338] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
  191. 191 [ 0.794191] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
  192. 192 [ 0.794348] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  193. 193 [ 0.794512] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
  194. 194 [ 0.794835] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
  195. 195 [ 0.795374] TCP: Hash tables configured (established 16384 bind 16384)
  196. 196 [ 0.795643] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
  197. 197 [ 0.795723] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
  198. 198 [ 0.796125] NET: Registered PF_UNIX/PF_LOCAL protocol family
  199. 199 [ 0.796186] NET: Registered PF_XDP protocol family
  200. 200 [ 0.796217] PCI: CLS 0 bytes, default 64
  201. 201 [ 0.796808] Trying to unpack rootfs image as initramfs...
  202. 202 [ 0.805046] kvm [1]: IPA Size Limit: 40 bits
  203. 203 [ 0.805109] kvm [1]: GICv3: no GICV resource entry
  204. 204 [ 0.805119] kvm [1]: disabling GICv2 emulation
  205. 205 [ 0.805154] kvm [1]: GIC system register CPU interface enabled
  206. 206 [ 0.805210] kvm [1]: vgic interrupt IRQ9
  207. 207 [ 0.805280] kvm [1]: VHE mode initialized successfully
  208. 208 [ 0.808740] Initialise system trusted keyrings
  209. 209 [ 0.808869] Key type blacklist registered
  210. 210 [ 0.809265] workingset: timestamp_bits=44 max_order=19 bucket_order=0
  211. 211 [ 0.809443] zbud: loaded
  212. 212 [ 0.810368] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  213. 213 [ 0.811131] fuse: init (API version 7.38)
  214. 214 [ 0.814498] integrity: Platform Keyring initialized
  215. 215 [ 0.856366] jitterentropy: Initialization failed with host not compliant with requirements: 9
  216. 216 [ 0.856419] xor: measuring software checksum speed
  217. 217 [ 0.862211] 8regs : 1723 MB/sec
  218. 218 [ 0.868496] 32regs : 1577 MB/sec
  219. 219 [ 0.875085] arm64_neon : 1510 MB/sec
  220. 220 [ 0.875104] xor: using function: 8regs (1723 MB/sec)
  221. 221 [ 0.875128] Key type asymmetric registered
  222. 222 [ 0.875138] Asymmetric key parser 'x509' registered
  223. 223 [ 0.875321] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  224. 224 [ 0.875706] io scheduler mq-deadline registered
  225. 225 [ 0.875724] io scheduler kyber registered
  226. 226 [ 0.875806] io scheduler bfq registered
  227. 227 [ 0.892568] rockchip-dw-pcie 3c0000000.pcie: host bridge /pcie@fe260000 ranges:
  228. 228 [ 0.892728] rockchip-dw-pcie 3c0000000.pcie: IO 0x00f4100000..0x00f41fffff -> 0x00f4100000
  229. 229 [ 0.892773] rockchip-dw-pcie 3c0000000.pcie: MEM 0x00f4200000..0x00f5ffffff -> 0x00f4200000
  230. 230 [ 0.892800] rockchip-dw-pcie 3c0000000.pcie: MEM 0x0300000000..0x033fffffff -> 0x0040000000
  231. 231 [ 0.893105] rockchip-dw-pcie 3c0000000.pcie: iATU: unroll T, 8 ob, 8 ib, align 64K, limit 8G
  232. 232 [ 1.996777] rockchip-dw-pcie 3c0000000.pcie: Phy link never came up
  233. 233 [ 1.997476] rockchip-dw-pcie 3c0000000.pcie: PCI host bridge to bus 0000:00
  234. 234 [ 1.997507] pci_bus 0000:00: root bus resource [bus 00-0f]
  235. 235 [ 1.997527] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xf4100000-0xf41fffff])
  236. 236 [ 1.997542] pci_bus 0000:00: root bus resource [mem 0xf4200000-0xf5ffffff]
  237. 237 [ 1.997556] pci_bus 0000:00: root bus resource [mem 0x300000000-0x33fffffff] (bus address [0x40000000-0x7fffffff])
  238. 238 [ 1.997618] pci 0000:00:00.0: [1d87:3566] type 01 class 0x060400
  239. 239 [ 1.997670] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
  240. 240 [ 1.997807] pci 0000:00:00.0: supports D1 D2
  241. 241 [ 1.997820] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  242. 242 [ 2.007052] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-0f] (conflicts with (null) [bus 00-0f])
  243. 243 [ 2.007475] pci 0000:00:00.0: BAR 6: assigned [mem 0xf4200000-0xf420ffff pref]
  244. 244 [ 2.007503] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
  245. 245 [ 2.011143] pcieport 0000:00:00.0: PME: Signaling with IRQ 22
  246. 246 [ 2.011763] pcieport 0000:00:00.0: AER: enabled with IRQ 22
  247. 247 [ 2.019533] dma-pl330 fe530000.dma-controller: Loaded driver for PL330 DMAC-241330
  248. 248 [ 2.019565] dma-pl330 fe530000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
  249. 249 [ 2.023429] dma-pl330 fe550000.dma-controller: Loaded driver for PL330 DMAC-241330
  250. 250 [ 2.023461] dma-pl330 fe550000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
  251. 251 [ 2.028527] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  252. 252 [ 2.036677] fe650000.serial: ttyS1 at MMIO 0xfe650000 (irq = 27, base_baud = 1500000) is a 16550A
  253. 253 [ 2.038355] Serial: AMBA driver
  254. 254 [ 2.044194] rockchip-vop2 fe040000.vop: Adding to iommu group 2
  255. 255 [ 2.064344] loop: module loaded
  256. 256 [ 2.071950] tun: Universal TUN/TAP device driver, 1.6
  257. 257 [ 2.073648] thunder_xcv, ver 1.0
  258. 258 [ 2.073718] thunder_bgx, ver 1.0
  259. 259 [ 2.073772] nicpf, ver 1.0
  260. 260 [ 2.075060] e1000e: Intel(R) PRO/1000 Network Driver
  261. 261 [ 2.075072] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  262. 262 [ 2.075136] igb: Intel(R) Gigabit Ethernet Network Driver
  263. 263 [ 2.075145] igb: Copyright (c) 2007-2014 Intel Corporation.
  264. 264 [ 2.075201] igbvf: Intel(R) Gigabit Virtual Function Network Driver
  265. 265 [ 2.075210] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  266. 266 [ 2.075567] sky2: driver version 1.30
  267. 267 [ 2.076962] VFIO - User Level meta-driver version: 0.3
  268. 268 [ 2.088418] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  269. 269 [ 2.088483] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  270. 270 [ 2.088768] xhci-hcd xhci-hcd.0.auto: USB3 root hub has no ports
  271. 271 [ 2.088788] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002000010
  272. 272 [ 2.088886] xhci-hcd xhci-hcd.0.auto: irq 31, io mem 0xfcc00000
  273. 273 [ 2.089503] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
  274. 274 [ 2.089525] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  275. 275 [ 2.089538] usb usb1: Product: xHCI Host Controller
  276. 276 [ 2.089548] usb usb1: Manufacturer: Linux 6.5.2-edge-rockchip64 xhci-hcd
  277. 277 [ 2.089558] usb usb1: SerialNumber: xhci-hcd.0.auto
  278. 278 [ 2.089645] ehci-platform fd800000.usb: EHCI Host Controller
  279. 279 [ 2.089906] ohci-platform fd840000.usb: Generic Platform OHCI controller
  280. 280 [ 2.089929] ehci-platform fd880000.usb: EHCI Host Controller
  281. 281 [ 2.089978] ohci-platform fd8c0000.usb: Generic Platform OHCI controller
  282. 282 [ 2.090535] hub 1-0:1.0: USB hub found
  283. 283 [ 2.090599] hub 1-0:1.0: 1 port detected
  284. 284 [ 2.091210] ehci-platform fd800000.usb: new USB bus registered, assigned bus number 2
  285. 285 [ 2.091469] ehci-platform fd800000.usb: irq 33, io mem 0xfd800000
  286. 286 [ 2.091510] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  287. 287 [ 2.091535] ohci-platform fd840000.usb: new USB bus registered, assigned bus number 3
  288. 288 [ 2.091550] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
  289. 289 [ 2.091733] ohci-platform fd840000.usb: irq 35, io mem 0xfd840000
  290. 290 [ 2.091749] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002000010
  291. 291 [ 2.091791] ehci-platform fd880000.usb: new USB bus registered, assigned bus number 5
  292. 292 [ 2.091824] ohci-platform fd8c0000.usb: new USB bus registered, assigned bus number 6
  293. 293 [ 2.091837] xhci-hcd xhci-hcd.1.auto: irq 32, io mem 0xfd000000
  294. 294 [ 2.091975] ehci-platform fd880000.usb: irq 34, io mem 0xfd880000
  295. 295 [ 2.092008] ohci-platform fd8c0000.usb: irq 36, io mem 0xfd8c0000
  296. 296 [ 2.092129] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  297. 297 [ 2.092155] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
  298. 298 [ 2.092178] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
  299. 299 [ 2.092484] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
  300. 300 [ 2.092505] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  301. 301 [ 2.092517] usb usb4: Product: xHCI Host Controller
  302. 302 [ 2.092527] usb usb4: Manufacturer: Linux 6.5.2-edge-rockchip64 xhci-hcd
  303. 303 [ 2.092537] usb usb4: SerialNumber: xhci-hcd.1.auto
  304. 304 [ 2.093449] hub 4-0:1.0: USB hub found
  305. 305 [ 2.093532] hub 4-0:1.0: 1 port detected
  306. 306 [ 2.094208] usb usb7: We don't know the algorithms for LPM for this host, disabling LPM.
  307. 307 [ 2.094423] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
  308. 308 [ 2.094443] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  309. 309 [ 2.094455] usb usb7: Product: xHCI Host Controller
  310. 310 [ 2.094466] usb usb7: Manufacturer: Linux 6.5.2-edge-rockchip64 xhci-hcd
  311. 311 [ 2.094475] usb usb7: SerialNumber: xhci-hcd.1.auto
  312. 312 [ 2.095279] hub 7-0:1.0: USB hub found
  313. 313 [ 2.095339] hub 7-0:1.0: 1 port detected
  314. 314 [ 2.096067] usbcore: registered new interface driver usb-storage
  315. 315 [ 2.099512] mousedev: PS/2 mouse device common for all mice
  316. 316 [ 2.101167] i2c_dev: i2c /dev entries driver
  317. 317 [ 2.103467] i2c 0-0020: Fixed dependency cycle(s) with /i2c@fdd40000/pmic@20/pinctrl_rk8xx/rk817_slppin_rst
  318. 318 [ 2.103533] i2c 0-0020: Fixed dependency cycle(s) with /i2c@fdd40000/pmic@20/pinctrl_rk8xx/rk817_slppin_pwrdn
  319. 319 [ 2.103578] i2c 0-0020: Fixed dependency cycle(s) with /i2c@fdd40000/pmic@20/pinctrl_rk8xx/rk817_slppin_slp
  320. 320 [ 2.104164] syr837: mapping for mode 1 not defined
  321. 321 [ 2.104710] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00
  322. 322 [ 2.105194] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
  323. 323 [ 2.105218] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  324. 324 [ 2.105231] usb usb2: Product: EHCI Host Controller
  325. 325 [ 2.105241] usb usb2: Manufacturer: Linux 6.5.2-edge-rockchip64 ehci_hcd
  326. 326 [ 2.105251] usb usb2: SerialNumber: fd800000.usb
  327. 327 [ 2.105412] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
  328. 328 [ 2.106283] hub 2-0:1.0: USB hub found
  329. 329 [ 2.106367] hub 2-0:1.0: 1 port detected
  330. 330 [ 2.120680] ehci-platform fd880000.usb: USB 2.0 started, EHCI 1.00
  331. 331 [ 2.121291] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
  332. 332 [ 2.121315] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  333. 333 [ 2.121328] usb usb5: Product: EHCI Host Controller
  334. 334 [ 2.121338] usb usb5: Manufacturer: Linux 6.5.2-edge-rockchip64 ehci_hcd
  335. 335 [ 2.121348] usb usb5: SerialNumber: fd880000.usb
  336. 336 [ 2.122291] hub 5-0:1.0: USB hub found
  337. 337 [ 2.122386] hub 5-0:1.0: 1 port detected
  338. 338 [ 2.152991] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.05
  339. 339 [ 2.153026] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  340. 340 [ 2.153039] usb usb3: Product: Generic Platform OHCI controller
  341. 341 [ 2.153049] usb usb3: Manufacturer: Linux 6.5.2-edge-rockchip64 ohci_hcd
  342. 342 [ 2.153059] usb usb3: SerialNumber: fd840000.usb
  343. 343 [ 2.154022] hub 3-0:1.0: USB hub found
  344. 344 [ 2.154112] hub 3-0:1.0: 1 port detected
  345. 345 [ 2.154136] rk808-regulator rk808-regulator: there is no dvs0 gpio
  346. 346 [ 2.154175] rk808-regulator rk808-regulator: there is no dvs1 gpio
  347. 347 [ 2.154189] rk808-regulator rk808-regulator: max buck steps per change: 8
  348. 348 [ 2.154971] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.05
  349. 349 [ 2.154994] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  350. 350 [ 2.155007] usb usb6: Product: Generic Platform OHCI controller
  351. 351 [ 2.155018] usb usb6: Manufacturer: Linux 6.5.2-edge-rockchip64 ohci_hcd
  352. 352 [ 2.155028] usb usb6: SerialNumber: fd8c0000.usb
  353. 353 [ 2.155890] hub 6-0:1.0: USB hub found
  354. 354 [ 2.155954] hub 6-0:1.0: 1 port detected
  355. 355 [ 2.191431] vccio_acodec: Bringing 3300000uV into 3000000-3000000uV
  356. 356 [ 2.205313] Freeing initrd memory: 21296K
  357. 357 [ 2.232556] input: rk805 pwrkey as /devices/platform/fdd40000.i2c/i2c-0/0-0020/rk805-pwrkey/input/input0
  358. 358 [ 2.245242] rk808-rtc rk808-rtc: registered as rtc0
  359. 359 [ 2.248007] rk808-rtc rk808-rtc: setting system clock to 2023-10-22T21:53:36 UTC (1698011616)
  360. 360 [ 2.253481] rockchip-thermal fe710000.tsadc: Missing tshut mode property, using default (gpio)
  361. 361 [ 2.253512] rockchip-thermal fe710000.tsadc: Missing tshut-polarity property, using default (low)
  362. 362 [ 2.259532] sdhci: Secure Digital Host Controller Interface driver
  363. 363 [ 2.259555] sdhci: Copyright(c) Pierre Ossman
  364. 364 [ 2.259610] Synopsys Designware Multimedia Card Interface Driver
  365. 365 [ 2.261255] sdhci-pltfm: SDHCI platform and OF driver helper
  366. 366 [ 2.262816] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
  367. 367 [ 2.262816] dwmmc_rockchip fe2b0000.mmc: IDMAC supports 32-bit address mode.
  368. 368 [ 2.262879] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
  369. 369 [ 2.262880] dwmmc_rockchip fe2b0000.mmc: Using internal DMA controller.
  370. 370 [ 2.262894] dwmmc_rockchip fe2b0000.mmc: Version ID is 270a
  371. 371 [ 2.262899] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
  372. 372 [ 2.262997] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 65,32 bit host data width,256 deep fifo
  373. 373 [ 2.263041] dwmmc_rockchip fe2b0000.mmc: DW MMC controller at irq 66,32 bit host data width,256 deep fifo
  374. 374 [ 2.263548] dwmmc_rockchip fe2c0000.mmc: allocated mmc-pwrseq
  375. 375 [ 2.263572] mmc_host mmc2: card is non-removable.
  376. 376 [ 2.265932] ledtrig-cpu: registered to indicate activity on CPUs
  377. 377 [ 2.267191] scmi_protocol scmi_dev.1: Enabled polling mode TX channel - prot_id:16
  378. 378 [ 2.267689] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
  379. 379 [ 2.267782] arm-scmi firmware:scmi: Malformed reply - real_sz:8 calc_sz:4 (loop_num_ret:3)
  380. 380 [ 2.267800] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
  381. 381 [ 2.270198] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
  382. 382 [ 2.270674] hid: raw HID events driver (C) Jiri Kosina
  383. 383 [ 2.270870] usbcore: registered new interface driver usbhid
  384. 384 [ 2.270881] usbhid: USB HID core driver
  385. 385 [ 2.276751] mmc_host mmc1: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
  386. 386 [ 2.278848] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counters available
  387. 387 [ 2.281266] drop_monitor: Initializing network drop monitor service
  388. 388 [ 2.281738] NET: Registered PF_INET6 protocol family
  389. 389 [ 2.296664] mmc0: SDHCI controller on fe310000.mmc [fe310000.mmc] using ADMA
  390. 390 [ 2.354493] Segment Routing with IPv6
  391. 391 [ 2.354607] In-situ OAM (IOAM) with IPv6
  392. 392 [ 2.354763] NET: Registered PF_PACKET protocol family
  393. 393 [ 2.355049] 8021q: 802.1Q VLAN Support v1.8
  394. 394 [ 2.355161] Key type dns_resolver registered
  395. 395 [ 2.369513] mmc_host mmc1: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
  396. 396 [ 2.370778] dwmmc_rockchip fe2b0000.mmc: All phases bad!
  397. 397 [ 2.370794] mmc1: tuning execution failed: -5
  398. 398 [ 2.370809] mmc1: error -5 whilst initialising SD card
  399. 399 [ 2.373660] registered taskstats version 1
  400. 400 [ 2.373900] Loading compiled-in X.509 certificates
  401. 401 [ 2.380002] zswap: loaded using pool zstd/z3fold
  402. 402 [ 2.399010] Key type .fscrypt registered
  403. 403 [ 2.399037] Key type fscrypt-provisioning registered
  404. 404 [ 2.399169] mmc_host mmc1: Bus speed (slot 0) = 375000Hz (slot req 375000Hz, actual 375000HZ div = 0)
  405. 405 [ 2.403146] Btrfs loaded, zoned=yes, fsverity=yes
  406. 406 [ 2.403403] Key type encrypted registered
  407. 407 [ 2.403430] AppArmor: AppArmor sha1 policy hashing enabled
  408. 408 [ 2.482934] rockchip-drm display-subsystem: bound fe040000.vop (ops vop2_component_ops)
  409. 409 [ 2.484777] mmc_host mmc2: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
  410. 410 [ 2.485016] dwhdmi-rockchip fe0a0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
  411. 411 [ 2.486217] dwhdmi-rockchip fe0a0000.hdmi: registered DesignWare HDMI I2C bus driver
  412. 412 [ 2.486911] rockchip-drm display-subsystem: bound fe0a0000.hdmi (ops dw_hdmi_rockchip_ops)
  413. 413 [ 2.487923] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
  414. 414 [ 2.499562] mmc_host mmc1: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
  415. 415 [ 2.500631] mmc0: Failed to initialize a non-removable card
  416. 416 [ 2.533168] mmc_host mmc2: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
  417. 417 [ 2.592225] Console: switching to colour frame buffer device 160x64
  418. 418 [ 2.617001] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device
  419. 419 [ 2.619129] WCN: marlin_init entry!
  420. 420 [ 2.619743] WCN: marlin_parse_dt chip_en gpio=27
  421. 421 [ 2.619764] WCN_ERR: gpio chip_en request err: 27
  422. 422 [ 2.619829] WCN: marlin_parse_dt reset gpio=79
  423. 423 [ 2.619870] WCN: wcn config keep power on
  424. 424 [ 2.620505] sdiohal:sdiohal_parse_dt adma_tx:0, adma_rx:0, pwrseq:0, irq type:data, gpio_num:0, blksize:512
  425. 425 [ 2.620525] sdiohal:not config sdio host node.
  426. 426 [ 2.625146] sdiohal:sdiohal_init ok
  427. 427 [ 2.626403] WCN: marlin_probe ok!
  428. 428 [ 2.627226] of_cfs_init
  429. 429 [ 2.627312] of_cfs_init: OK
  430. 430 [ 2.627627] clk: Disabling unused clocks
  431. 431 [ 2.632846] Freeing unused kernel memory: 4608K
  432. 432 [ 2.644692] usb 6-1: new low-speed USB device number 2 using ohci-platform
  433. 433 [ 2.644760] Run /init as init process
  434. 434 [ 2.644774] with arguments:
  435. 435 [ 2.644784] /init
  436. 436 [ 2.644792] with environment:
  437. 437 [ 2.644799] HOME=/
  438. 438 [ 2.644805] TERM=linux
  439. 439 [ 2.644847] splash=verbose
  440. 440 [ 2.644856] ubootpart=eb6fb04d-3b7c-5049-9565-0ed2b9f9720e
  441. 441 [ 2.644864] cgroup_enable=memory
  442. 442 [ 2.644872] cgroup_memory=1
  443. 443 [ 2.652494] dwmmc_rockchip fe2b0000.mmc: Successfully tuned phase to 280
  444. 444 [ 2.652557] mmc1: new ultra high speed SDR104 SDHC card at address aaaa
  445. 445 [ 2.654253] mmcblk1: mmc1:aaaa SE32G 29.7 GiB
  446. 446 [ 2.663998] GPT:Primary header thinks Alt. header is not at the end of the disk.
  447. 447 [ 2.664023] GPT:3923967 != 62333951
  448. 448 [ 2.664038] GPT:Alternate GPT header not at the end of the disk.
  449. 449 [ 2.664043] GPT:3923967 != 62333951
  450. 450 [ 2.664050] GPT: Use GNU Parted to correct GPT errors.
  451. 451 [ 2.664086] mmcblk1: p1
  452. 452 [ 2.676827] dwmmc_rockchip fe2c0000.mmc: Successfully tuned phase to 185
  453. 453 [ 2.678520] mmc2: new ultra high speed SDR104 SDIO card at address 8800
  454. 454 [ 2.876815] usb 6-1: New USB device found, idVendor=c0f4, idProduct=05e0, bcdDevice= 1.10
  455. 455 [ 2.876853] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  456. 456 [ 2.876866] usb 6-1: Product: usb keyboard
  457. 457 [ 2.876877] usb 6-1: Manufacturer: SZH
  458. 458 [ 2.885528] input: SZH usb keyboard as /devices/platform/fd8c0000.usb/usb6/6-1/6-1:1.0/0003:C0F4:05E0.0001/input/input1
  459. 459 [ 2.945921] hid-generic 0003:C0F4:05E0.0001: input,hidraw0: USB HID v1.10 Keyboard [SZH usb keyboard] on usb-fd8c0000.usb-1/input0
  460. 460 [ 2.952457] input: SZH usb keyboard Consumer Control as /devices/platform/fd8c0000.usb/usb6/6-1/6-1:1.1/0003:C0F4:05E0.0002/input/input2
  461. 461 [ 3.020880] input: SZH usb keyboard System Control as /devices/platform/fd8c0000.usb/usb6/6-1/6-1:1.1/0003:C0F4:05E0.0002/input/input3
  462. 462 [ 3.021671] hid-generic 0003:C0F4:05E0.0002: input,hidraw1: USB HID v1.10 Device [SZH usb keyboard] on usb-fd8c0000.usb-1/input1
  463. 463 [ 3.946613] rk_gmac-dwmac fe010000.ethernet: IRQ eth_lpi not found
  464. 464 [ 3.947131] rk_gmac-dwmac fe010000.ethernet: supply phy not found, using dummy regulator
  465. 465 [ 3.947449] rk_gmac-dwmac fe010000.ethernet: clock input or output? (input).
  466. 466 [ 3.947470] rk_gmac-dwmac fe010000.ethernet: TX delay(0x30).
  467. 467 [ 3.947484] rk_gmac-dwmac fe010000.ethernet: RX delay(0x10).
  468. 468 [ 3.947509] rk_gmac-dwmac fe010000.ethernet: integrated PHY? (no).
  469. 469 [ 3.947596] rk_gmac-dwmac fe010000.ethernet: clock input from PHY
  470. 470 [ 3.959603] spi-nor spi4.0: spi-nor-generic (16384 Kbytes)
  471. 471 [ 3.974459] rk_gmac-dwmac fe010000.ethernet: init for RGMII
  472. 472 [ 3.983415] rk_gmac-dwmac fe010000.ethernet: User ID: 0x30, Synopsys ID: 0x51
  473. 473 [ 3.983461] rk_gmac-dwmac fe010000.ethernet: DWMAC4/5
  474. 474 [ 3.983477] rk_gmac-dwmac fe010000.ethernet: DMA HW capability register supported
  475. 475 [ 3.983488] rk_gmac-dwmac fe010000.ethernet: RX Checksum Offload Engine supported
  476. 476 [ 3.983498] rk_gmac-dwmac fe010000.ethernet: TX Checksum insertion supported
  477. 477 [ 3.983506] rk_gmac-dwmac fe010000.ethernet: Wake-Up On Lan supported
  478. 478 [ 3.983678] rk_gmac-dwmac fe010000.ethernet: TSO supported
  479. 479 [ 3.983694] rk_gmac-dwmac fe010000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  480. 480 [ 3.983724] rk_gmac-dwmac fe010000.ethernet: device MAC address fa:73:4a:fb:12:d3
  481. 481 [ 3.983742] rk_gmac-dwmac fe010000.ethernet: Enabled RFS Flow TC (entries=10)
  482. 482 [ 3.983757] rk_gmac-dwmac fe010000.ethernet: TSO feature enabled
  483. 483 [ 3.983768] rk_gmac-dwmac fe010000.ethernet: Using 32/32 bits DMA host/device width
  484. 484 [ 4.354124] rk_gmac-dwmac fe010000.ethernet end0: renamed from eth0
  485. 485 [ 4.735152] EXT4-fs (mmcblk1p1): mounted filesystem 50b1c2a8-fc2a-47b5-a6f0-3ea23edcd51d ro with writeback data mode. Quota mode: none.
  486. 486 [ 5.409182] systemd[1]: Inserted module 'autofs4'
  487. 487 [ 5.468402] systemd[1]: systemd 252.12-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
  488. 488 [ 5.468459] systemd[1]: Detected architecture arm64.
  489. 489 [ 5.469474] systemd[1]: Detected first boot.
  490. 490 [ 5.474960] systemd[1]: Hostname set to <orangepi3b>.
  491. 491 [ 5.478501] systemd[1]: Initializing machine ID from random generator.
  492. 492 [ 5.906859] (sd-execut[200]: /usr/lib/systemd/system-generators/netplan failed with exit status 1.
  493. 493 [ 9.424663] systemd[1]: Failed to populate /etc with preset unit settings, ignoring: Read-only file system
  494. 494 [ 9.948729] systemd[1]: Queued start job for default target graphical.target.
  495. 495 [ 9.985031] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
  496. 496 [ 9.989255] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty.
  497. 497 [ 9.992145] systemd[1]: Created slice user.slice - User and Session Slice.
  498. 498 [ 9.993260] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
  499. 499 [ 9.995043] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
  500. 500 [ 9.995673] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
  501. 501 [ 9.996254] systemd[1]: Reached target slices.target - Slice Units.
  502. 502 [ 9.996595] systemd[1]: Reached target swap.target - Swaps.
  503. 503 [ 9.996967] systemd[1]: Reached target time-set.target - System Time Set.
  504. 504 [ 9.997542] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
  505. 505 [ 10.030710] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket.
  506. 506 [ 10.032697] systemd[1]: Listening on syslog.socket - Syslog Socket.
  507. 507 [ 10.034149] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
  508. 508 [ 10.035010] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
  509. 509 [ 10.037221] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
  510. 510 [ 10.038641] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
  511. 511 [ 10.040255] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
  512. 512 [ 10.042283] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
  513. 513 [ 10.043747] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
  514. 514 [ 10.052207] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
  515. 515 [ 10.062086] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
  516. 516 [ 10.072071] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
  517. 517 [ 10.081781] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
  518. 518 [ 10.083505] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
  519. 519 [ 10.096010] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock...
  520. 520 [ 10.106957] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
  521. 521 [ 10.118500] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
  522. 522 [ 10.130905] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
  523. 523 [ 10.143175] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
  524. 524 [ 10.154453] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
  525. 525 [ 10.165758] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
  526. 526 [ 10.177271] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
  527. 527 [ 10.188516] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
  528. 528 [ 10.190382] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
  529. 529 [ 10.208067] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
  530. 530 [ 10.208162] device-mapper: uevent: version 1.0.3
  531. 531 [ 10.209952] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
  532. 532 [ 10.220410] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
  533. 533 [ 10.231224] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
  534. 534 [ 10.250802] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
  535. 535 [ 10.253794] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
  536. 536 [ 10.257393] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
  537. 537 [ 10.261269] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
  538. 538 [ 10.266579] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock.
  539. 539 [ 10.272235] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
  540. 540 [ 10.278876] systemd[1]: modprobe@configfs.service: Deactivated successfully.
  541. 541 [ 10.280567] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
  542. 542 [ 10.285315] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
  543. 543 [ 10.286947] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
  544. 544 [ 10.290821] systemd[1]: modprobe@drm.service: Deactivated successfully.
  545. 545 [ 10.292573] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
  546. 546 [ 10.296169] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
  547. 547 [ 10.298678] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
  548. 548 [ 10.303011] systemd[1]: modprobe@fuse.service: Deactivated successfully.
  549. 549 [ 10.304207] EXT4-fs (mmcblk1p1): re-mounted 50b1c2a8-fc2a-47b5-a6f0-3ea23edcd51d r/w. Quota mode: none.
  550. 550 [ 10.304681] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
  551. 551 [ 10.315894] systemd[1]: modprobe@loop.service: Deactivated successfully.
  552. 552 [ 10.318030] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
  553. 553 [ 10.321876] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
  554. 554 [ 10.368276] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
  555. 555 [ 10.377617] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
  556. 556 [ 10.378863] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
  557. 557 [ 10.392314] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed...
  558. 558 [ 10.393781] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
  559. 559 [ 10.410156] systemd[1]: Starting systemd-sysusers.service - Create System Users...
  560. 560 [ 10.422481] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  561. 561 [ 10.431101] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
  562. 562 [ 10.438173] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  563. 563 [ 10.439403] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
  564. 564 [ 10.450239] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
  565. 565 [ 10.478454] WCN: start_marlin [MARLIN_WIFI]
  566. 566 [ 10.478487] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1
  567. 567 [ 10.478498] WCN: the first power on start
  568. 568 [ 10.504713] sdiohal:sdiohal_scan_card
  569. 569 [ 10.505056] sdiohal:sdiohal_probe: func->class=0, vendor=0x0000, device=0x0000, func_num=0x0001, clock=150000000
  570. 570 [ 10.505818] WCN: marlin_get_wcn_chipid: chipid: 0x2355b001
  571. 571 [ 10.505838] WCN: marlin_scan_finish!
  572. 572 [ 10.505846] sdiohal:probe ok
  573. 573 [ 10.506030] sdiohal:scan end!
  574. 574 [ 10.506045] WCN: then marlin start to download
  575. 575 [ 10.506092] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start!
  576. 576 [ 10.532218] systemd[1]: Finished systemd-sysusers.service - Create System Users.
  577. 577 [ 10.577775] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
  578. 578 [ 10.688960] WCN: combin_img 0 marlin_firmware_write finish and successful
  579. 579 [ 10.689391] WCN: marlin_start_run read reset reg val:0x1
  580. 580 [ 10.689408] WCN: after do marlin_start_run reset reg val:0x0
  581. 581 [ 10.689877] WCN: s_marlin_bootup_time=10689876125
  582. 582 [ 10.706197] WCN: clock mode: TSX
  583. 583 [ 10.706746] WCN: marlin_write_cali_data sync init_state:0x0
  584. 584 [ 10.712967] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev.
  585. 585 [ 10.727714] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout.
  586. 586 [ 10.730183] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems.
  587. 587 [ 10.737229] WCN: marlin_write_cali_data sync init_state:0xf0f0f0f1
  588. 588 [ 10.737269] WCN: sdio_config rx mode:[sdma]
  589. 589 [ 10.737274] WCN: sdio_config blksize:[512]
  590. 590 [ 10.737279] WCN: sdio_config irq:[inband]
  591. 591 [ 10.737283] WCN: sdio_config wake_host_level_duration_time:[20ms]
  592. 592 [ 10.737291] WCN: marlin_send_sdio_config_to_cp sdio_config:0x880831 (enable config)
  593. 593 [ 10.738300] WCN: marlin_write_cali_data finish
  594. 594 [ 10.738887] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0
  595. 595 [ 10.761752] systemd[1]: Mounting tmp.mount - /tmp...
  596. 596 [ 10.769183] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0
  597. 597 [ 10.772397] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files...
  598. 598 [ 10.801193] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0
  599. 599 [ 10.802614] systemd[1]: Mounted tmp.mount - /tmp.
  600. 600 [ 10.805722] systemd[1]: Reached target local-fs.target - Local File Systems.
  601. 601 [ 10.829193] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0
  602. 602 [ 10.849852] systemd[1]: Starting armbian-zram-config.service - Armbian ZRAM config...
  603. 603 [ 10.857164] WCN: check_cp_ready sync val:0xf0f0f0ff, prj_type val:0x0
  604. 604 [ 10.857297] WCN: wcn_config_log_file: Error, config file not found. want config file:/data/unisoc_cp2log_config.txt
  605. 605 [ 10.857342] WCN: wcn_config_log_file: Error, config file not found. want config file:/vendor/etc/wifi/unisoc_cp2log_config.txt
  606. 606 [ 10.857354] WCN: wcn_config_log_file: there is no unisoc_cp2log_config.txt
  607. 607 [ 10.857361] WCN: wcn_debug_init unisoc cp2 log: limit_size:[20971520 Byte], log_file_num:[2], cover_old:[1-cover_old]
  608. 608 [ 10.857383] WCN: open /data/unisoc_dbg error!
  609. 609 [ 10.857399] WCN: open /data error!
  610. 610 [ 10.863228] WCN: open /mnt/UDISK error!
  611. 611 [ 10.863262] sdiohal:sdiohal_runtime_get entry
  612. 612 [ 10.869291] systemd[1]: Starting console-setup.service - Set console font and keymap...
  613. 613 [ 10.872905] WCN: get_cp2_version entry!
  614. 614 [ 10.893341] systemd[1]: Starting plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data...
  615. 615 [ 10.921589] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats...
  616. 616 [ 10.924163] WCN: WCND at cmd read:WCN_VER:Platform Version:MARLIN3_19B_W21.05.3~Project Version:sc2355_marlin3_lite_ott~12-15-2021 11:26:33~
  617. 617 [ 10.924302] WCN: then marlin download finished and run ok
  618. 618 [ 10.924316] WCN: start_loopcheck
  619. 619 [ 10.935396] systemd[1]: Received SIGRTMIN+20 from PID 163 (plymouthd).
  620. 620 [ 10.949181] systemd[1]: Finished plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data.
  621. 621 [ 11.004817] sprdwl:__sprdwl_cmd_getbuf cant't get vif, ctx_id: 0
  622. 622 [ 11.014343] WCN: cali_ini_need_download return 1
  623. 623 [ 11.014379] WCN: get_board_ant_num [one_ant]
  624. 624 [ 11.014399] wifi ini path = /lib/firmware/wifi_2355b001_1ant.ini
  625. 625 [ 11.014588] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 274 (systemd-binfmt)
  626. 626 [ 11.016656] sprdwl:__sprdwl_cmd_getbuf cant't get vif, ctx_id: 0
  627. 627 [ 11.030158] sprdwl:__sprdwl_cmd_getbuf cant't get vif, ctx_id: 0
  628. 628 [ 11.041562] sprdwl:__sprdwl_cmd_getbuf cant't get vif, ctx_id: 0
  629. 629 [ 11.055543] sprdwl:sprdwl_get_fw_info length mismatch: len_count=83, r_len=89
  630. 630 [ 11.055579] sprdwl:sprdwl_get_fw_info, drv_version=1, fw_version=2, compat_ver=0
  631. 631 [ 11.055589] sprdwl:chip_model:0x2355, chip_ver:0x0
  632. 632 [ 11.055597] sprdwl:fw_ver:0, fw_std:0x7f, fw_capa:0x120f7f
  633. 633 [ 11.055605] sprdwl:mac_addr:a0:67:20:f1:bc:33
  634. 634 [ 11.055616] sprdwl:credit_capa:TX_WITH_CREDIT
  635. 635 [ 11.055622] sprdwl:ott support:0
  636. 636 [ 11.095673] sprdwl:__sprdwl_cmd_getbuf cant't get vif, ctx_id: 0
  637. 637 [ 11.113773] unisoc_wifi unisoc_wifi wlan0: mixed HW and IP checksum settings.
  638. 638 [ 11.134961] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
  639. 639 [ 11.162039] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
  640. 640 [ 11.275664] zram: Added device: zram0
  641. 641 [ 11.281418] zram: Added device: zram1
  642. 642 [ 11.285627] zram: Added device: zram2
  643. 643 [ 11.305394] systemd[1]: Mounting proc-sys-fs-binfmt_misc.mount - Arbitrary Executable File Formats File System...
  644. 644 [ 11.319458] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables.
  645. 645 [ 11.345378] systemd[1]: Started systemd-udevd.service - Rule-based Manager for Device Events and Files.
  646. 646 [ 11.394814] systemd[1]: Mounted proc-sys-fs-binfmt_misc.mount - Arbitrary Executable File Formats File System.
  647. 647 [ 11.423098] systemd[1]: Finished systemd-binfmt.service - Set Up Additional Binary Formats.
  648. 648 [ 11.472430] systemd[1]: Listening on systemd-rfkill.socket - Load/Save RF Kill Switch Status /dev/rfkill Watch.
  649. 649 [ 11.517920] systemd[1]: Starting systemd-rfkill.service - Load/Save RF Kill Switch Status...
  650. 650 [ 11.571666] zram0: detected capacity change from 0 to 1961440
  651. 651 [ 11.636320] systemd[1]: Started systemd-rfkill.service - Load/Save RF Kill Switch Status.
  652. 652 [ 11.780701] random: crng init done
  653. 653 [ 11.811466] systemd[1]: Finished systemd-random-seed.service - Load/Save Random Seed.
  654. 654 [ 11.814043] systemd[1]: Reached target first-boot-complete.target - First Boot Complete.
  655. 655 [ 11.873917] systemd[1]: Starting systemd-machine-id-commit.service - Commit a transient machine-id on disk...
  656. 656 [ 11.915166] Adding 980716k swap on /dev/zram0. Priority:5 extents:1 across:980716k SSFS
  657. 657 [ 12.007647] systemd[1]: etc-machine\x2did.mount: Deactivated successfully.
  658. 658 [ 12.029588] systemd[1]: Finished systemd-machine-id-commit.service - Commit a transient machine-id on disk.
  659. 659 [ 12.111219] systemd[1]: Finished systemd-udev-trigger.service - Coldplug All udev Devices.
  660. 660 [ 12.178170] systemd[1]: Starting ifupdown-pre.service - Helper to synchronize boot up for ifupdown...
  661. 661 [ 12.196061] systemd[1]: Starting plymouth-start.service - Show Plymouth Boot Screen...
  662. 662 [ 12.223604] systemd[1]: Finished ifupdown-pre.service - Helper to synchronize boot up for ifupdown.
  663. 663 [ 12.297336] systemd[1]: Started plymouth-start.service - Show Plymouth Boot Screen.
  664. 664 [ 12.308426] systemd[1]: Found device dev-ttyS2.device - /dev/ttyS2.
  665. 665 [ 12.334864] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid).
  666. 666 [ 12.336208] systemd[1]: Started systemd-ask-password-plymouth.path - Forward Password Requests to Plymouth Directory Watch.
  667. 667 [ 12.341292] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
  668. 668 [ 12.343225] systemd[1]: Reached target paths.target - Path Units.
  669. 669 [ 12.394015] systemd[1]: Starting networking.service - Raise network interfaces...
  670. 670 [ 12.507002] zram1: detected capacity change from 0 to 102400
  671. 671 [ 12.618099] systemd[1]: Finished armbian-zram-config.service - Armbian ZRAM config.
  672. 672 [ 12.663352] systemd[1]: Starting armbian-ramlog.service - Armbian memory supported logging...
  673. 673 [ 12.861695] EXT4-fs (zram1): mounted filesystem e58ab3e9-8573-4dda-8910-52eb101ff0b8 r/w without journal. Quota mode: none.
  674. 674 [ 13.368941] systemd[1]: Finished networking.service - Raise network interfaces.
  675. 675 [ 13.592248] mc: Linux media interface: v0.10
  676. 676 [ 13.622434] panfrost fde60000.gpu: clock rate = 594000000
  677. 677 [ 13.622472] panfrost fde60000.gpu: bus_clock rate = 500000000
  678. 678 [ 13.637706] videodev: Linux video capture interface: v2.00
  679. 679 [ 13.660104] panfrost fde60000.gpu: mali-g52 id 0x7402 major 0x1 minor 0x0 status 0x0
  680. 680 [ 13.660126] panfrost fde60000.gpu: features: 00000000,00000cf7, issues: 00000000,00000400
  681. 681 [ 13.660133] panfrost fde60000.gpu: Features: L2:0x07110206 Shader:0x00000002 Tiler:0x00000209 Mem:0x1 MMU:0x00002823 AS:0xff JS:0x7
  682. 682 [ 13.660140] panfrost fde60000.gpu: shader_present=0x1 l2_present=0x1
  683. 683 [ 13.708948] [drm] Initialized panfrost 1.2.0 20180908 for fde60000.gpu on minor 1
  684. 684 [ 13.719113] rockchip-rga fdeb0000.rga: HW Version: 0x03.02
  685. 685 [ 13.719713] rockchip-rga fdeb0000.rga: Registered rockchip-rga as /dev/video0
  686. 686 [ 13.730517] hantro-vpu fdea0000.video-codec: Adding to iommu group 0
  687. 687 [ 13.731290] hantro-vpu fdea0000.video-codec: registered rockchip,rk3568-vpu-dec as /dev/video1
  688. 688 [ 13.731866] hantro-vpu fdee0000.video-codec: Adding to iommu group 1
  689. 689 [ 13.732858] hantro-vpu fdee0000.video-codec: registered rockchip,rk3568-vepu-enc as /dev/video2
  690. 690 [ 14.706373] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid).
  691. 691 [ 14.750129] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
  692. 692 [ 14.763859] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
  693. 693 [ 14.778768] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
  694. 694 [ 14.787478] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
  695. 695 [ 14.791942] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
  696. 696 [ 14.799416] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
  697. 697 [ 14.800283] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
  698. 698 [ 14.803756] systemd[1]: modprobe@loop.service: Deactivated successfully.
  699. 699 [ 14.806516] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
  700. 700 [ 14.808791] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
  701. 701 [ 14.809186] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
  702. 702 [ 15.374770] systemd[1]: Finished armbian-ramlog.service - Armbian memory supported logging.
  703. 703 [ 15.417861] systemd[1]: Starting systemd-journald.service - Journal Service...
  704. 704 [ 15.697215] systemd[1]: Started systemd-journald.service - Journal Service.
  705. 705 [ 15.781986] systemd-journald[600]: Received client request to flush runtime journal.
  706. 706 [ 16.068922] RPC: Registered named UNIX socket transport module.
  707. 707 [ 16.068942] RPC: Registered udp transport module.
  708. 708 [ 16.068946] RPC: Registered tcp transport module.
  709. 709 [ 16.068949] RPC: Registered tcp-with-tls transport module.
  710. 710 [ 16.068952] RPC: Registered tcp NFSv4.1 backchannel transport module.
  711. 711
  712. 712 ### armbian-release:
  713. 713
  714. 714 # PLEASE DO NOT EDIT THIS FILE
  715. 715 BOARD=orangepi3b
  716. 716 BOARD_NAME="orangepi3b"
  717. 717 BOARDFAMILY=rk35xx
  718. 718 BUILD_REPOSITORY_URL=https://github.com/armbian/build
  719. 719 BUILD_REPOSITORY_COMMIT=5382fbdd
  720. 720 LINUXFAMILY=rockchip64
  721. 721 ARCH=arm64
  722. 722 IMAGE_TYPE=stable
  723. 723 BOARD_TYPE=csc
  724. 724 INITRD_ARCH=arm64
  725. 725 KERNEL_IMAGE_TYPE=Image
  726. 726 FORCE_BOOTSCRIPT_UPDATE=
  727. 727 VENDOR=Armbian
  728. 728 BOOTSCRIPT_FORCE_UPDATE="no"
  729. 729 BOOTSCRIPT_DST="boot.cmd"
  730. 730 VERSION=23.8.2
  731. 731 REVISION=23.8.2
  732. 732
  733. 733 ### boot environment:
  734. 734
  735. 735 verbosity=1
  736. 736 bootlogo=false
  737. 737 overlay_prefix=rk35xx
  738. 738 fdtfile=rockchip/rk3566-orangepi-3b.dtb
  739. 739 rootdev=UUID=50b1c2a8-fc2a-47b5-a6f0-3ea23edcd51d
  740. 740 rootfstype=ext4
  741. 741
  742. 742 ### lsusb:
  743. 743
  744. 744 Bus 006 Device 002: ID c0f4:05e0 SZH usb keyboard
  745. 745 Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  746. 746 Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  747. 747 Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  748. 748 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  749. 749 Bus 007 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
  750. 750 Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  751. 751 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  752. 752
  753. 753 ### lscpu:
  754. 754
  755. 755 Architecture: aarch64
  756. 756 CPU op-mode(s): 32-bit, 64-bit
  757. 757 Byte Order: Little Endian
  758. 758 CPU(s): 4
  759. 759 On-line CPU(s) list: 0-3
  760. 760 Vendor ID: ARM
  761. 761 Model name: Cortex-A55
  762. 762 Model: 0
  763. 763 Thread(s) per core: 1
  764. 764 Core(s) per cluster: 4
  765. 765 Socket(s): -
  766. 766 Cluster(s): 1
  767. 767 Stepping: r2p0
  768. 768 CPU(s) scaling MHz: 100%
  769. 769 CPU max MHz: 1800.0000
  770. 770 CPU min MHz: 408.0000
  771. 771 BogoMIPS: 48.00
  772. 772 Flags: fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp
  773. 773 NUMA node(s): 1
  774. 774 NUMA node0 CPU(s): 0-3
  775. 775 Vulnerability Gather data sampling: Not affected
  776. 776 Vulnerability Itlb multihit: Not affected
  777. 777 Vulnerability L1tf: Not affected
  778. 778 Vulnerability Mds: Not affected
  779. 779 Vulnerability Meltdown: Not affected
  780. 780 Vulnerability Mmio stale data: Not affected
  781. 781 Vulnerability Retbleed: Not affected
  782. 782 Vulnerability Spec rstack overflow: Not affected
  783. 783 Vulnerability Spec store bypass: Not affected
  784. 784 Vulnerability Spectre v1: Mitigation; __user pointer sanitization
  785. 785 Vulnerability Spectre v2: Not affected
  786. 786 Vulnerability Srbds: Not affected
  787. 787 Vulnerability Tsx async abort: Not affected
  788. 788
  789. 789 ### cpuinfo:
  790. 790
  791. 791 processor : 0
  792. 792 BogoMIPS : 48.00
  793. 793 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp
  794. 794 CPU implementer : 0x41
  795. 795 CPU architecture: 8
  796. 796 CPU variant : 0x2
  797. 797 CPU part : 0xd05
  798. 798 CPU revision : 0
  799. 799
  800. 800 processor : 1
  801. 801 BogoMIPS : 48.00
  802. 802 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp
  803. 803 CPU implementer : 0x41
  804. 804 CPU architecture: 8
  805. 805 CPU variant : 0x2
  806. 806 CPU part : 0xd05
  807. 807 CPU revision : 0
  808. 808
  809. 809 processor : 2
  810. 810 BogoMIPS : 48.00
  811. 811 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp
  812. 812 CPU implementer : 0x41
  813. 813 CPU architecture: 8
  814. 814 CPU variant : 0x2
  815. 815 CPU part : 0xd05
  816. 816 CPU revision : 0
  817. 817
  818. 818 processor : 3
  819. 819 BogoMIPS : 48.00
  820. 820 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp
  821. 821 CPU implementer : 0x41
  822. 822 CPU architecture: 8
  823. 823 CPU variant : 0x2
  824. 824 CPU part : 0xd05
  825. 825 CPU revision : 0
  826. 826
  827. 827
  828. 828 ### meminfo:
  829. 829
  830. 830 MemTotal: 1961440 kB
  831. 831 MemFree: 1746432 kB
  832. 832 MemAvailable: 1764824 kB
  833. 833 Buffers: 9316 kB
  834. 834 Cached: 68364 kB
  835. 835 SwapCached: 0 kB
  836. 836 Active: 70628 kB
  837. 837 Inactive: 22772 kB
  838. 838 Active(anon): 23956 kB
  839. 839 Inactive(anon): 412 kB
  840. 840 Active(file): 46672 kB
  841. 841 Inactive(file): 22360 kB
  842. 842 Unevictable: 8108 kB
  843. 843 Mlocked: 0 kB
  844. 844 SwapTotal: 980716 kB
  845. 845 SwapFree: 980716 kB
  846. 846 Zswap: 0 kB
  847. 847 Zswapped: 0 kB
  848. 848 Dirty: 776 kB
  849. 849 Writeback: 0 kB
  850. 850 AnonPages: 24088 kB
  851. 851 Mapped: 19508 kB
  852. 852 Shmem: 5516 kB
  853. 853 KReclaimable: 22620 kB
  854. 854 Slab: 54272 kB
  855. 855 SReclaimable: 22620 kB
  856. 856 SUnreclaim: 31652 kB
  857. 857 KernelStack: 2832 kB
  858. 858 PageTables: 2304 kB
  859. 859 SecPageTables: 0 kB
  860. 860 NFS_Unstable: 0 kB
  861. 861 Bounce: 0 kB
  862. 862 WritebackTmp: 0 kB
  863. 863 CommitLimit: 1961436 kB
  864. 864 Committed_AS: 66708 kB
  865. 865 VmallocTotal: 133141626880 kB
  866. 866 VmallocUsed: 30932 kB
  867. 867 VmallocChunk: 0 kB
  868. 868 Percpu: 1024 kB
  869. 869 AnonHugePages: 0 kB
  870. 870 ShmemHugePages: 0 kB
  871. 871 ShmemPmdMapped: 0 kB
  872. 872 FileHugePages: 0 kB
  873. 873 FilePmdMapped: 0 kB
  874. 874 CmaTotal: 131072 kB
  875. 875 CmaFree: 121328 kB
  876. 876 HugePages_Total: 0
  877. 877 HugePages_Free: 0
  878. 878 HugePages_Rsvd: 0
  879. 879 HugePages_Surp: 0
  880. 880 Hugepagesize: 2048 kB
  881. 881 Hugetlb: 0 kB
  882. 882 Sun Oct 22 09:53:50 PM UTC 2023 | orangepi3b | 23.8.2 | arm64 | aarch64 | 6.5.2-edge-rockchip64
  883. 883
  884. 884 ### virtual memory:
  885. 885
  886. 886 vm.admin_reserve_kbytes = 8192
  887. 887
  888. 888 ### [resize2fs] Trying to resize partition /dev/mmcblk1p1:
  889. 889
  890. 890 vm.compaction_proactiveness = 20
  891. 891 diskdevname: mmcblk1
  892. 892 diskdev: /dev/mmcblk1
  893. 893 vm.compact_unevictable_allowed = 1
  894. 894 vm.dirty_background_bytes = 0
  895. 895 partindex: 1
  896. 896 vm.dirty_background_ratio = 10
  897. 897 vm.dirty_bytes = 0
  898. 898 vm.dirty_expire_centisecs = 3000
  899. 899 vm.dirty_ratio = 20
  900. 900 Warning: Not all of the space available to /dev/mmcblk1 appears to be used, you can fix the GPT to use all of the space (an extra 58409984 blocks) or continue with the current setting?
  901. 901 vm.dirtytime_expire_seconds = 43200
  902. 902 vm.dirty_writeback_centisecs = 500
  903. 903 vm.extfrag_threshold = 500
  904. 904 vm.hugetlb_shm_group = 0
  905. 905 vm.laptop_mode = 0
  906. 906 Warning: Not all of the space available to /dev/mmcblk1 appears to be used, you can fix the GPT to use all of the space (an extra 58409984 blocks) or continue with the current setting?
  907. 907 vm.legacy_va_layout = 0
  908. 908 partstart: 32768s
  909. 909 partend: 3923934s
  910. 910 vm.lowmem_reserve_ratio = 256 256 32 0
  911. 911 vm.max_map_count = 65530
  912. 912 Warning: Not all of the space available to /dev/mmcblk1 appears to be used, you can fix the GPT to use all of the space (an extra 58409984 blocks) or continue with the current setting?
  913. 913 vm.memfd_noexec = 0
  914. 914 vm.min_free_kbytes = 22528
  915. 915 vm.min_slab_ratio = 5
  916. 916 vm.min_unmapped_ratio = 1
  917. 917 Warning: Not all of the space available to /dev/mmcblk1 appears to be used, you can fix the GPT to use all of the space (an extra 58409984 blocks) or continue with the current setting?
  918. 918 vm.mmap_min_addr = 4096
  919. 919 vm.mmap_rnd_bits = 18
  920. 920 vm.mmap_rnd_compat_bits = 11
  921. 921 Warning: Not all of the space available to /dev/mmcblk1 appears to be used, you can fix the GPT to use all of the space (an extra 58409984 blocks) or continue with the current setting?
  922. 922 vm.nr_hugepages = 0
  923. 923 capacity: 62333952s
  924. 924 sectorsize: 512B
  925. 925 Leaving 1% spare area
  926. 926 Old partition table:
  927. 927
  928. 928 major minor #blocks name
  929. 929
  930. 930 179 0 31166976 mmcblk1
  931. 931 179 1 1945583 mmcblk1p1
  932. 932 31 0 16384 mtdblock0
  933. 933 251 0 980720 zram0
  934. 934 251 1 51200 zram1
  935. 935
  936. 936 Executing fdisk:
  937. 937 vm.nr_hugepages_mempolicy = 0
  938. 938 vm.nr_overcommit_hugepages = 0
  939. 939 vm.numa_stat = 1
  940. 940 Warning: Not all of the space available to /dev/mmcblk1 appears to be used, you can fix the GPT to use all of the space (an extra 58409984 blocks) or continue with the current setting?
  941. 941 vm.numa_zonelist_order = Node
  942. 942 vm.oom_dump_tasks = 1
  943. 943 vm.oom_kill_allocating_task = 0
  944. 944 vm.overcommit_kbytes = 0
  945. 945 vm.overcommit_memory = 0
  946. 946
  947. 947 Welcome to fdisk (util-linux 2.38.1).
  948. 948 Changes will remain in memory only, until you decide to write them.
  949. 949 Be careful before using the write command.
  950. 950
  951. 951 GPT PMBR size mismatch (3923967 != 62333951) will be corrected by write.
  952. 952 The backup GPT table is not on the end of the device. This problem will be corrected by write.
  953. 953 This disk is currently in use - repartitioning is probably a bad idea.
  954. 954 It's recommended to umount all file systems, and swapoff all swap
  955. 955 partitions on this disk.
  956. 956
  957. 957
  958. 958 Command (m for help):
  959. 959 Selected partition 1
  960. 960 Partition 1 has been deleted.
  961. 961
  962. 962 Command (m for help): Partition number (1-128, default 1): Value out of range.
  963. 963 Partition number (1-128, default 1): First sector (2048-62333918, default 2048): Last sector, +/-sectors or +/-size{K,M,G,T,P} (32768-62333918, default 62332927): vm.overcommit_ratio = 50
  964. 964
  965. 965 Created a new partition 1 of type 'Linux filesystem' and of size 29.4 GiB.
  966. 966 Partition #1 contains a ext4 signature.
  967. 967
  968. 968 Command (m for help): vm.page-cluster = 0
  969. 969 vm.page_lock_unfairness = 5
  970. 970 vm.panic_on_oom = 0
  971. 971 vm.percpu_pagelist_high_fraction = 0
  972. 972
  973. 973 The partition table has been altered.
  974. 974 Syncing disks.
  975. 975
  976. 976
  977. 977 Executing partprobe:
  978. 978 vm.stat_interval = 1
  979. 979 vm.swappiness = 100
  980. 980 vm.user_reserve_kbytes = 60053
  981. 981 vm.vfs_cache_pressure = 100
  982. 982 vm.watermark_boost_factor = 15000
  983. 983 vm.watermark_scale_factor = 10
  984. 984 vm.zone_reclaim_mode = 0
  985. 985
  986. 986 ### ip addr:
  987. 987
  988. 988 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
  989. 989 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
  990. 990 inet XXX.XXX.0.1/8 scope host lo
  991. 991 valid_lft forever preferred_lft forever
  992. 992 inet6 ::1/128 scope host noprefixroute
  993. 993 valid_lft forever preferred_lft forever
  994. 994 2: end0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
  995. 995 link/ether ba:00:3a:87:05:11 brd ff:ff:ff:ff:ff:ff
  996. 996 3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
  997. 997 link/ether a0:67:20:f1:bc:33 brd ff:ff:ff:ff:ff:ff
  998. 998
  999. 999 ### partitions:
  1000. 1000
  1001. 1001 New partition table:
  1002. 1002
  1003. 1003 major minor #blocks name
  1004. 1004
  1005. 1005 179 0 31166976 mmcblk1
  1006. 1006 179 1 30834688 mmcblk1p1
  1007. 1007 31 0 16384 mtdblock0
  1008. 1008 251 0 980720 zram0
  1009. 1009 251 1 51200 zram1
  1010. 1010 major minor #blocks name
  1011. 1011
  1012. 1012 179 0 31166976 mmcblk1
  1013. 1013 179 1 30834688 mmcblk1p1
  1014. 1014 31 0 16384 mtdblock0
  1015. 1015 251 0 980720 zram0
  1016. 1016 251 1 51200 zram1
  1017. 1017
  1018. 1018 ### df:
  1019. 1019
  1020. 1020
  1021. 1021 ### [resize2fs] Trying to resize ext4 filesystem on /dev/mmcblk1p1:
  1022. 1022
  1023. 1023 Running 'resize2fs /dev/mmcblk1p1' now...
  1024. 1024 udev 882M 0 882M 0% /dev
  1025. 1025 tmpfs 192M 416K 192M 1% /run
  1026. 1026 /dev/mmcblk1p1 1.8G 1.6G 173M 91% /
  1027. 1027 tmpfs 958M 0 958M 0% /dev/shm
  1028. 1028 tmpfs 5.0M 0 5.0M 0% /run/lock
  1029. 1029 tmpfs 958M 4.0K 958M 1% /tmp
  1030. 1030 /dev/zram1 47M 468K 43M 2% /var/log
  1031. 1031 resize2fs 1.47.0 (5-Feb-2023)
  1032. 1032
  1033. 1033 ### lsblk:
  1034. 1034
  1035. 1035 NAME FSTYPE SIZE MOUNTPOINT UUID
  1036. 1036 mtdblock0 16M
  1037. 1037 mmcblk1 29.7G
  1038. 1038 └─mmcblk1p1 ext4 29.4G / 50b1c2a8-fc2a-47b5-a6f0-3ea23edcd51d
  1039. 1039 zram1 50M /var/log
  1040. 1040 zram2 0B
  1041. 1041
  1042. 1042 ### zramctl:
  1043. 1043
  1044. 1044 NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT
  1045. 1045 /dev/zram1 zstd 50M 512K 82.7K 892K 4 /var/log
  1046. 1046 /dev/zram0 lzo-rle 957.7M 4K 74B 12K 4 [SWAP]
  1047. 1047
  1048. 1048 ### mtab:
  1049. 1049
  1050. 1050 /dev/mmcblk1p1 / ext4 rw,noatime,errors=remount-ro,commit=600,mb_optimize_scan=0 0 0
  1051. 1051 /dev/mmcblk1p1 /var/log.hdd ext4 rw,noatime,errors=remount-ro,commit=600,mb_optimize_scan=0 0 0
  1052. 1052 /dev/zram1 /var/log ext4 rw,relatime,discard 0 0
  1053. 1053 Filesystem at /dev/mmcblk1p1 is mounted on /; on-line resizing required
  1054. 1054 old_desc_blocks = 1, new_desc_blocks = 4
  1055. 1055 The filesystem on /dev/mmcblk1p1 is now 7708672 (4k) blocks long.
  1056. 1056
  1057. 1057 Removed "/etc/systemd/system/basic.target.wants/armbian-resize-filesystem.service".
  1058. 1058
  1059. 1059 ### mmc1:aaaa info:
  1060. 1060
  1061. 1061 fwrev: 0x0
  1062. 1062 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=SE32G MODALIAS=mmc:block
  1063. 1063 cid: 035344534533324780a6b2553a0178f9
  1064. 1064 rca: 0xaaaa
  1065. 1065 csd: 400e00325b590000edc87f800a4040c3
  1066. 1066 manfid: 0x000003
  1067. 1067 ocr: 0x00300000
  1068. 1068 preferred_erase_size: 4194304
  1069. 1069 type: SD
  1070. 1070 hwrev: 0x8
  1071. 1071 date: 08/2023
  1072. 1072 dsr: 0x404
  1073. 1073 erase_size: 512
  1074. 1074 oemid: 0x5344
  1075. 1075 serial: 0xa6b2553a
  1076. 1076 ssr: 0000000005000000040090000f053a1e000800000001000000000000000000000000000000000000000000000000000000000000000000000000000000000000
  1077. 1077 scr: 0235844300000000
  1078. 1078 name: SE32G
  1079. 1079
  1080. 1080 ### Boot system health:
  1081. 1081
  1082. 1082 Time CPU load %cpu %sys %usr %nice %io %irq Tcpu C.St.
  1083. 1083 21:53:52 1800 MHz 0.46 56% 33% 20% 0% 2% 0% 46.7 °C 0/6
  1084. 1084 21:53:53 1800 MHz 0.46 28% 8% 17% 0% 1% 0% 46.7 °C 0/6
  1085. 1085 21:53:53 1800 MHz 0.46 82% 53% 25% 1% 1% 0% 47.2 °C 0/6
  1086. 1086 21:53:53 1800 MHz 0.46 96% 43% 36% 0% 14% 1% 48.3 °C 0/6
  1087. 1087 21:53:54 1800 MHz 0.46 93% 34% 54% 0% 3% 0% 48.3 °C 0/6
  1088. 1088
  1089. 1089 ### quick iozone test: 4 853 1624 10031 10183 5805 2003
  1090. 1090
  1091. 1091 ### [firstrun] Recreated SSH keys (entropy: 256 256)
  1092. 1092
  1093. 1093 ### Activated 1 lzo-rle zram swap devices with 957MB each.
  1094. 1094 ### Activated Armbian ramlog partition with zstd compression
  1095. 1095
  1096. 1096 Mon Oct 23 12:59:17 AM MSK 2023 | orangepi3b | 23.8.2 | arm64 | aarch64 | 6.5.2-edge-rockchip64
  1097. 1097
  1098. 1098 ### dmesg:
  1099. 1099
  1100. 1100 [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
  1101. 1101 [ 0.000000] Linux version 6.5.2-edge-rockchip64 (armbian@next) (aarch64-linux-gnu-gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #1 SMP PREEMPT Wed Sep 6 20:22:26 UTC 2023
  1102. 1102 [ 0.000000] Machine model: Rockchip RK3566 OPi 3B
  1103. 1103 [ 0.000000] efi: UEFI not found.
  1104. 1104 [ 0.000000] NUMA: No NUMA configuration found
  1105. 1105 [ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x000000007fffffff]
  1106. 1106 [ 0.000000] NUMA: NODE_DATA [mem 0x7fb669c0-0x7fb68fff]
  1107. 1107 [ 0.000000] Zone ranges:
  1108. 1108 [ 0.000000] DMA [mem 0x0000000000200000-0x000000007fffffff]
  1109. 1109 [ 0.000000] DMA32 empty
  1110. 1110 [ 0.000000] Normal empty
  1111. 1111 [ 0.000000] Movable zone start for each node
  1112. 1112 [ 0.000000] Early memory node ranges
  1113. 1113 [ 0.000000] node 0: [mem 0x0000000000200000-0x000000007fffffff]
  1114. 1114 [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
  1115. 1115 [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
  1116. 1116 [ 0.000000] cma: Reserved 128 MiB at 0x0000000075a00000
  1117. 1117 [ 0.000000] psci: probing for conduit method from DT.
  1118. 1118 [ 0.000000] psci: PSCIv1.1 detected in firmware.
  1119. 1119 [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  1120. 1120 [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  1121. 1121 [ 0.000000] psci: SMC Calling Convention v1.2
  1122. 1122 [ 0.000000] percpu: Embedded 31 pages/cpu s87272 r8192 d31512 u126976
  1123. 1123 [ 0.000000] pcpu-alloc: s87272 r8192 d31512 u126976 alloc=31*4096
  1124. 1124 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  1125. 1125 [ 0.000000] Detected VIPT I-cache on CPU0
  1126. 1126 [ 0.000000] CPU features: detected: GIC system register CPU interface
  1127. 1127 [ 0.000000] CPU features: detected: Virtualization Host Extensions
  1128. 1128 [ 0.000000] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807, 2441009
  1129. 1129 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
  1130. 1130 [ 0.000000] alternatives: applying boot alternatives
  1131. 1131 [ 0.000000] Kernel command line: root=UUID=50b1c2a8-fc2a-47b5-a6f0-3ea23edcd51d rootwait rootfstype=ext4 splash=verbose console=ttyS2,1500000 console=tty1 consoleblank=0 loglevel=1 ubootpart=f43e2cad-e8ba-2e42-bfec-f98a7e1ef320 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
  1132. 1132 [ 0.000000] The swapaccount= commandline option is deprecated. Please report your usecase to linux-mm@kvack.org if you depend on this functionality.
  1133. 1133 [ 0.000000] Unknown kernel command line parameters "splash=verbose ubootpart=f43e2cad-e8ba-2e42-bfec-f98a7e1ef320 cgroup_enable=memory cgroup_memory=1", will be passed to user space.
  1134. 1134 [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  1135. 1135 [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
  1136. 1136 [ 0.000000] Fallback order for Node 0: 0
  1137. 1137 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 515592
  1138. 1138 [ 0.000000] Policy zone: DMA
  1139. 1139 [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
  1140. 1140 [ 0.000000] software IO TLB: area num 4.
  1141. 1141 [ 0.000000] software IO TLB: mapped [mem 0x0000000071700000-0x0000000075700000] (64MB)
  1142. 1142 [ 0.000000] Memory: 1804464K/2095104K available (16832K kernel code, 2296K rwdata, 6264K rodata, 4608K init, 585K bss, 159568K reserved, 131072K cma-reserved)
  1143. 1143 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  1144. 1144 [ 0.000000] trace event string verifier disabled
  1145. 1145 [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  1146. 1146 [ 0.000000] rcu: RCU event tracing is enabled.
  1147. 1147 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
  1148. 1148 [ 0.000000] Trampoline variant of Tasks RCU enabled.
  1149. 1149 [ 0.000000] Tracing variant of Tasks RCU enabled.
  1150. 1150 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  1151. 1151 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  1152. 1152 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  1153. 1153 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  1154. 1154 [ 0.000000] GICv3: 320 SPIs implemented
  1155. 1155 [ 0.000000] GICv3: 0 Extended SPIs implemented
  1156. 1156 [ 0.000000] GICv3: MBI range [296:319]
  1157. 1157 [ 0.000000] GICv3: Using MBI frame 0x00000000fd410000
  1158. 1158 [ 0.000000] Root IRQ handler: gic_handle_irq
  1159. 1159 [ 0.000000] GICv3: GICv3 features: 16 PPIs
  1160. 1160 [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000
  1161. 1161 [ 0.000000] ITS: No ITS available, not enabling LPIs
  1162. 1162 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  1163. 1163 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  1164. 1164 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  1165. 1165 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  1166. 1166 [ 0.001384] Console: colour dummy device 80x25
  1167. 1167 [ 0.001403] printk: console [tty1] enabled
  1168. 1168 [ 0.001583] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  1169. 1169 [ 0.001608] pid_max: default: 32768 minimum: 301
  1170. 1170 [ 0.001737] LSM: initializing lsm=capability,yama,apparmor,integrity
  1171. 1171 [ 0.001791] Yama: becoming mindful.
  1172. 1172 [ 0.001927] AppArmor: AppArmor initialized
  1173. 1173 [ 0.001982] stackdepot: allocating hash table of 131072 entries via kvcalloc
  1174. 1174 [ 0.002457] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
  1175. 1175 [ 0.002488] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
  1176. 1176 [ 0.004202] cacheinfo: Unable to detect cache hierarchy for CPU 0
  1177. 1177 [ 0.005822] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
  1178. 1178 [ 0.006004] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
  1179. 1179 [ 0.006434] rcu: Hierarchical SRCU implementation.
  1180. 1180 [ 0.006445] rcu: Max phase no-delay instances is 1000.
  1181. 1181 [ 0.010916] EFI services will not be available.
  1182. 1182 [ 0.011701] smp: Bringing up secondary CPUs ...
  1183. 1183 [ 0.012858] Detected VIPT I-cache on CPU1
  1184. 1184 [ 0.012953] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000
  1185. 1185 [ 0.013022] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
  1186. 1186 [ 0.014244] Detected VIPT I-cache on CPU2
  1187. 1187 [ 0.014326] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000
  1188. 1188 [ 0.014380] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
  1189. 1189 [ 0.015601] Detected VIPT I-cache on CPU3
  1190. 1190 [ 0.015686] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000
  1191. 1191 [ 0.015741] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
  1192. 1192 [ 0.015924] smp: Brought up 1 node, 4 CPUs
  1193. 1193 [ 0.015953] SMP: Total of 4 processors activated.
  1194. 1194 [ 0.015963] CPU features: detected: 32-bit EL0 Support
  1195. 1195 [ 0.015969] CPU features: detected: 32-bit EL1 Support
  1196. 1196 [ 0.015977] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
  1197. 1197 [ 0.015984] CPU features: detected: Common not Private translations
  1198. 1198 [ 0.015991] CPU features: detected: CRC32 instructions
  1199. 1199 [ 0.016001] CPU features: detected: RCpc load-acquire (LDAPR)
  1200. 1200 [ 0.016008] CPU features: detected: LSE atomic instructions
  1201. 1201 [ 0.016015] CPU features: detected: Privileged Access Never
  1202. 1202 [ 0.016021] CPU features: detected: RAS Extension Support
  1203. 1203 [ 0.016030] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
  1204. 1204 [ 0.016154] CPU: All CPU(s) started at EL2
  1205. 1205 [ 0.016164] alternatives: applying system-wide alternatives
  1206. 1206 [ 0.022586] devtmpfs: initialized
  1207. 1207 [ 0.051088] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  1208. 1208 [ 0.051161] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  1209. 1209 [ 0.055321] pinctrl core: initialized pinctrl subsystem
  1210. 1210 [ 0.056310] DMI not present or invalid.
  1211. 1211 [ 0.057360] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  1212. 1212 [ 0.059912] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
  1213. 1213 [ 0.061142] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  1214. 1214 [ 0.062355] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  1215. 1215 [ 0.062487] audit: initializing netlink subsys (disabled)
  1216. 1216 [ 0.062866] audit: type=2000 audit(0.060:1): state=initialized audit_enabled=0 res=1
  1217. 1217 [ 0.064305] thermal_sys: Registered thermal governor 'fair_share'
  1218. 1218 [ 0.064319] thermal_sys: Registered thermal governor 'bang_bang'
  1219. 1219 [ 0.064327] thermal_sys: Registered thermal governor 'step_wise'
  1220. 1220 [ 0.064334] thermal_sys: Registered thermal governor 'user_space'
  1221. 1221 [ 0.064425] cpuidle: using governor menu
  1222. 1222 [ 0.064942] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  1223. 1223 [ 0.065189] ASID allocator initialised with 65536 entries
  1224. 1224 [ 0.067353] Serial: AMBA PL011 UART driver
  1225. 1225 [ 0.087436] platform fe0a0000.hdmi: Fixed dependency cycle(s) with /vop@fe040000/ports/port@0/endpoint@2
  1226. 1226 [ 0.128860] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
  1227. 1227 [ 0.129502] rockchip-gpio fdd60000.gpio: probed /pinctrl/gpio@fdd60000
  1228. 1228 [ 0.130241] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
  1229. 1229 [ 0.130665] rockchip-gpio fe740000.gpio: probed /pinctrl/gpio@fe740000
  1230. 1230 [ 0.131261] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation.
  1231. 1231 [ 0.131684] rockchip-gpio fe750000.gpio: probed /pinctrl/gpio@fe750000
  1232. 1232 [ 0.132368] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation.
  1233. 1233 [ 0.132776] rockchip-gpio fe760000.gpio: probed /pinctrl/gpio@fe760000
  1234. 1234 [ 0.133346] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation.
  1235. 1235 [ 0.133796] rockchip-gpio fe770000.gpio: probed /pinctrl/gpio@fe770000
  1236. 1236 [ 0.137352] platform hdmi-con: Fixed dependency cycle(s) with /hdmi@fe0a0000/ports/port@1/endpoint
  1237. 1237 [ 0.144603] Modules: 25072 pages in range for non-PLT usage
  1238. 1238 [ 0.144626] Modules: 516592 pages in range for PLT usage
  1239. 1239 [ 0.146040] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
  1240. 1240 [ 0.146061] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
  1241. 1241 [ 0.146072] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
  1242. 1242 [ 0.146079] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
  1243. 1243 [ 0.146087] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
  1244. 1244 [ 0.146094] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
  1245. 1245 [ 0.146103] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
  1246. 1246 [ 0.146110] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
  1247. 1247 [ 0.147804] cryptd: max_cpu_qlen set to 1000
  1248. 1248 [ 0.217877] raid6: neonx8 gen() 1368 MB/s
  1249. 1249 [ 0.286013] raid6: neonx4 gen() 1412 MB/s
  1250. 1250 [ 0.354167] raid6: neonx2 gen() 1278 MB/s
  1251. 1251 [ 0.422311] raid6: neonx1 gen() 1043 MB/s
  1252. 1252 [ 0.490459] raid6: int64x8 gen() 912 MB/s
  1253. 1253 [ 0.558604] raid6: int64x4 gen() 1047 MB/s
  1254. 1254 [ 0.626732] raid6: int64x2 gen() 935 MB/s
  1255. 1255 [ 0.694881] raid6: int64x1 gen() 676 MB/s
  1256. 1256 [ 0.694892] raid6: using algorithm neonx4 gen() 1412 MB/s
  1257. 1257 [ 0.763027] raid6: .... xor() 1061 MB/s, rmw enabled
  1258. 1258 [ 0.763039] raid6: using neon recovery algorithm
  1259. 1259 [ 0.764806] iommu: Default domain type: Translated
  1260. 1260 [ 0.764826] iommu: DMA domain TLB invalidation policy: strict mode
  1261. 1261 [ 0.765530] SCSI subsystem initialized
  1262. 1262 [ 0.767612] libata version 3.00 loaded.
  1263. 1263 [ 0.768051] usbcore: registered new interface driver usbfs
  1264. 1264 [ 0.768112] usbcore: registered new interface driver hub
  1265. 1265 [ 0.768186] usbcore: registered new device driver usb
  1266. 1266 [ 0.769187] pps_core: LinuxPPS API ver. 1 registered
  1267. 1267 [ 0.769200] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  1268. 1268 [ 0.769236] PTP clock support registered
  1269. 1269 [ 0.769712] EDAC MC: Ver: 3.0.0
  1270. 1270 [ 0.770323] scmi_core: SCMI protocol bus registered
  1271. 1271 [ 0.772012] NetLabel: Initializing
  1272. 1272 [ 0.772024] NetLabel: domain hash size = 128
  1273. 1273 [ 0.772034] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  1274. 1274 [ 0.772140] NetLabel: unlabeled traffic allowed by default
  1275. 1275 [ 0.772415] vgaarb: loaded
  1276. 1276 [ 0.773226] clocksource: Switched to clocksource arch_sys_counter
  1277. 1277 [ 0.774050] VFS: Disk quotas dquot_6.6.0
  1278. 1278 [ 0.774135] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  1279. 1279 [ 0.775343] AppArmor: AppArmor Filesystem Enabled
  1280. 1280 [ 0.791597] NET: Registered PF_INET protocol family
  1281. 1281 [ 0.792003] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
  1282. 1282 [ 0.794847] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
  1283. 1283 [ 0.795005] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  1284. 1284 [ 0.795173] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
  1285. 1285 [ 0.795511] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
  1286. 1286 [ 0.796057] TCP: Hash tables configured (established 16384 bind 16384)
  1287. 1287 [ 0.796328] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
  1288. 1288 [ 0.796417] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
  1289. 1289 [ 0.796819] NET: Registered PF_UNIX/PF_LOCAL protocol family
  1290. 1290 [ 0.796895] NET: Registered PF_XDP protocol family
  1291. 1291 [ 0.796926] PCI: CLS 0 bytes, default 64
  1292. 1292 [ 0.797565] Trying to unpack rootfs image as initramfs...
  1293. 1293 [ 0.805661] kvm [1]: IPA Size Limit: 40 bits
  1294. 1294 [ 0.805753] kvm [1]: GICv3: no GICV resource entry
  1295. 1295 [ 0.805765] kvm [1]: disabling GICv2 emulation
  1296. 1296 [ 0.805801] kvm [1]: GIC system register CPU interface enabled
  1297. 1297 [ 0.805853] kvm [1]: vgic interrupt IRQ9
  1298. 1298 [ 0.805919] kvm [1]: VHE mode initialized successfully
  1299. 1299 [ 0.809202] Initialise system trusted keyrings
  1300. 1300 [ 0.809363] Key type blacklist registered
  1301. 1301 [ 0.809813] workingset: timestamp_bits=44 max_order=19 bucket_order=0
  1302. 1302 [ 0.809993] zbud: loaded
  1303. 1303 [ 0.810914] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  1304. 1304 [ 0.811708] fuse: init (API version 7.38)
  1305. 1305 [ 0.815084] integrity: Platform Keyring initialized
  1306. 1306 [ 0.861663] xor: measuring software checksum speed
  1307. 1307 [ 0.867437] 8regs : 1723 MB/sec
  1308. 1308 [ 0.873738] 32regs : 1577 MB/sec
  1309. 1309 [ 0.880292] arm64_neon : 1510 MB/sec
  1310. 1310 [ 0.880312] xor: using function: 8regs (1723 MB/sec)
  1311. 1311 [ 0.880338] Key type asymmetric registered
  1312. 1312 [ 0.880348] Asymmetric key parser 'x509' registered
  1313. 1313 [ 0.880515] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  1314. 1314 [ 0.880928] io scheduler mq-deadline registered
  1315. 1315 [ 0.880946] io scheduler kyber registered
  1316. 1316 [ 0.881024] io scheduler bfq registered
  1317. 1317 [ 0.898092] rockchip-dw-pcie 3c0000000.pcie: host bridge /pcie@fe260000 ranges:
  1318. 1318 [ 0.898177] rockchip-dw-pcie 3c0000000.pcie: IO 0x00f4100000..0x00f41fffff -> 0x00f4100000
  1319. 1319 [ 0.898220] rockchip-dw-pcie 3c0000000.pcie: MEM 0x00f4200000..0x00f5ffffff -> 0x00f4200000
  1320. 1320 [ 0.898247] rockchip-dw-pcie 3c0000000.pcie: MEM 0x0300000000..0x033fffffff -> 0x0040000000
  1321. 1321 [ 0.898532] rockchip-dw-pcie 3c0000000.pcie: iATU: unroll T, 8 ob, 8 ib, align 64K, limit 8G
  1322. 1322 [ 2.005586] rockchip-dw-pcie 3c0000000.pcie: Phy link never came up
  1323. 1323 [ 2.006320] rockchip-dw-pcie 3c0000000.pcie: PCI host bridge to bus 0000:00
  1324. 1324 [ 2.006352] pci_bus 0000:00: root bus resource [bus 00-0f]
  1325. 1325 [ 2.006370] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xf4100000-0xf41fffff])
  1326. 1326 [ 2.006384] pci_bus 0000:00: root bus resource [mem 0xf4200000-0xf5ffffff]
  1327. 1327 [ 2.006398] pci_bus 0000:00: root bus resource [mem 0x300000000-0x33fffffff] (bus address [0x40000000-0x7fffffff])
  1328. 1328 [ 2.006461] pci 0000:00:00.0: [1d87:3566] type 01 class 0x060400
  1329. 1329 [ 2.006514] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
  1330. 1330 [ 2.006647] pci 0000:00:00.0: supports D1 D2
  1331. 1331 [ 2.006660] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  1332. 1332 [ 2.015974] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-0f] (conflicts with (null) [bus 00-0f])
  1333. 1333 [ 2.016374] pci 0000:00:00.0: BAR 6: assigned [mem 0xf4200000-0xf420ffff pref]
  1334. 1334 [ 2.016405] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
  1335. 1335 [ 2.020044] pcieport 0000:00:00.0: PME: Signaling with IRQ 22
  1336. 1336 [ 2.020663] pcieport 0000:00:00.0: AER: enabled with IRQ 22
  1337. 1337 [ 2.028400] dma-pl330 fe530000.dma-controller: Loaded driver for PL330 DMAC-241330
  1338. 1338 [ 2.028431] dma-pl330 fe530000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
  1339. 1339 [ 2.032232] dma-pl330 fe550000.dma-controller: Loaded driver for PL330 DMAC-241330
  1340. 1340 [ 2.032265] dma-pl330 fe550000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
  1341. 1341 [ 2.037554] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  1342. 1342 [ 2.045429] fe650000.serial: ttyS1 at MMIO 0xfe650000 (irq = 27, base_baud = 1500000) is a 16550A
  1343. 1343 [ 2.047187] Serial: AMBA driver
  1344. 1344 [ 2.052994] rockchip-vop2 fe040000.vop: Adding to iommu group 2
  1345. 1345 [ 2.072994] loop: module loaded
  1346. 1346 [ 2.080537] tun: Universal TUN/TAP device driver, 1.6
  1347. 1347 [ 2.082234] thunder_xcv, ver 1.0
  1348. 1348 [ 2.082302] thunder_bgx, ver 1.0
  1349. 1349 [ 2.082355] nicpf, ver 1.0
  1350. 1350 [ 2.083654] e1000e: Intel(R) PRO/1000 Network Driver
  1351. 1351 [ 2.083666] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  1352. 1352 [ 2.083727] igb: Intel(R) Gigabit Ethernet Network Driver
  1353. 1353 [ 2.083737] igb: Copyright (c) 2007-2014 Intel Corporation.
  1354. 1354 [ 2.083792] igbvf: Intel(R) Gigabit Virtual Function Network Driver
  1355. 1355 [ 2.083802] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  1356. 1356 [ 2.084139] sky2: driver version 1.30
  1357. 1357 [ 2.085558] VFIO - User Level meta-driver version: 0.3
  1358. 1358 [ 2.097110] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  1359. 1359 [ 2.097170] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  1360. 1360 [ 2.097427] xhci-hcd xhci-hcd.0.auto: USB3 root hub has no ports
  1361. 1361 [ 2.097448] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002000010
  1362. 1362 [ 2.097545] xhci-hcd xhci-hcd.0.auto: irq 31, io mem 0xfcc00000
  1363. 1363 [ 2.098127] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
  1364. 1364 [ 2.098151] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1365. 1365 [ 2.098164] usb usb1: Product: xHCI Host Controller
  1366. 1366 [ 2.098174] usb usb1: Manufacturer: Linux 6.5.2-edge-rockchip64 xhci-hcd
  1367. 1367 [ 2.098184] usb usb1: SerialNumber: xhci-hcd.0.auto
  1368. 1368 [ 2.098350] ehci-platform fd800000.usb: EHCI Host Controller
  1369. 1369 [ 2.098399] ohci-platform fd840000.usb: Generic Platform OHCI controller
  1370. 1370 [ 2.098954] ehci-platform fd880000.usb: EHCI Host Controller
  1371. 1371 [ 2.099348] ohci-platform fd8c0000.usb: Generic Platform OHCI controller
  1372. 1372 [ 2.099436] hub 1-0:1.0: USB hub found
  1373. 1373 [ 2.099506] hub 1-0:1.0: 1 port detected
  1374. 1374 [ 2.100136] ehci-platform fd800000.usb: new USB bus registered, assigned bus number 2
  1375. 1375 [ 2.100177] ohci-platform fd840000.usb: new USB bus registered, assigned bus number 3
  1376. 1376 [ 2.100381] ehci-platform fd800000.usb: irq 33, io mem 0xfd800000
  1377. 1377 [ 2.100418] ohci-platform fd840000.usb: irq 35, io mem 0xfd840000
  1378. 1378 [ 2.100447] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  1379. 1379 [ 2.100452] ehci-platform fd880000.usb: new USB bus registered, assigned bus number 4
  1380. 1380 [ 2.100491] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 5
  1381. 1381 [ 2.100624] ehci-platform fd880000.usb: irq 34, io mem 0xfd880000
  1382. 1382 [ 2.100671] ohci-platform fd8c0000.usb: new USB bus registered, assigned bus number 6
  1383. 1383 [ 2.100715] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002000010
  1384. 1384 [ 2.100804] xhci-hcd xhci-hcd.1.auto: irq 32, io mem 0xfd000000
  1385. 1385 [ 2.100852] ohci-platform fd8c0000.usb: irq 36, io mem 0xfd8c0000
  1386. 1386 [ 2.101115] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  1387. 1387 [ 2.101151] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
  1388. 1388 [ 2.101176] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
  1389. 1389 [ 2.101515] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
  1390. 1390 [ 2.101536] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1391. 1391 [ 2.101549] usb usb5: Product: xHCI Host Controller
  1392. 1392 [ 2.101559] usb usb5: Manufacturer: Linux 6.5.2-edge-rockchip64 xhci-hcd
  1393. 1393 [ 2.101569] usb usb5: SerialNumber: xhci-hcd.1.auto
  1394. 1394 [ 2.102468] hub 5-0:1.0: USB hub found
  1395. 1395 [ 2.102534] hub 5-0:1.0: 1 port detected
  1396. 1396 [ 2.103220] usb usb7: We don't know the algorithms for LPM for this host, disabling LPM.
  1397. 1397 [ 2.103430] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
  1398. 1398 [ 2.103450] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1399. 1399 [ 2.103463] usb usb7: Product: xHCI Host Controller
  1400. 1400 [ 2.103472] usb usb7: Manufacturer: Linux 6.5.2-edge-rockchip64 xhci-hcd
  1401. 1401 [ 2.103483] usb usb7: SerialNumber: xhci-hcd.1.auto
  1402. 1402 [ 2.104304] hub 7-0:1.0: USB hub found
  1403. 1403 [ 2.104365] hub 7-0:1.0: 1 port detected
  1404. 1404 [ 2.105092] usbcore: registered new interface driver usb-storage
  1405. 1405 [ 2.108587] mousedev: PS/2 mouse device common for all mice
  1406. 1406 [ 2.110265] i2c_dev: i2c /dev entries driver
  1407. 1407 [ 2.112499] i2c 0-0020: Fixed dependency cycle(s) with /i2c@fdd40000/pmic@20/pinctrl_rk8xx/rk817_slppin_rst
  1408. 1408 [ 2.112565] i2c 0-0020: Fixed dependency cycle(s) with /i2c@fdd40000/pmic@20/pinctrl_rk8xx/rk817_slppin_pwrdn
  1409. 1409 [ 2.112611] i2c 0-0020: Fixed dependency cycle(s) with /i2c@fdd40000/pmic@20/pinctrl_rk8xx/rk817_slppin_slp
  1410. 1410 [ 2.113260] syr837: mapping for mode 1 not defined
  1411. 1411 [ 2.113319] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00
  1412. 1412 [ 2.113985] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
  1413. 1413 [ 2.114012] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1414. 1414 [ 2.114024] usb usb2: Product: EHCI Host Controller
  1415. 1415 [ 2.114035] usb usb2: Manufacturer: Linux 6.5.2-edge-rockchip64 ehci_hcd
  1416. 1416 [ 2.114045] usb usb2: SerialNumber: fd800000.usb
  1417. 1417 [ 2.114527] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
  1418. 1418 [ 2.115213] hub 2-0:1.0: USB hub found
  1419. 1419 [ 2.115310] hub 2-0:1.0: 1 port detected
  1420. 1420 [ 2.133278] ehci-platform fd880000.usb: USB 2.0 started, EHCI 1.00
  1421. 1421 [ 2.133909] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
  1422. 1422 [ 2.133934] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1423. 1423 [ 2.133948] usb usb4: Product: EHCI Host Controller
  1424. 1424 [ 2.133959] usb usb4: Manufacturer: Linux 6.5.2-edge-rockchip64 ehci_hcd
  1425. 1425 [ 2.133969] usb usb4: SerialNumber: fd880000.usb
  1426. 1426 [ 2.134930] hub 4-0:1.0: USB hub found
  1427. 1427 [ 2.135028] hub 4-0:1.0: 1 port detected
  1428. 1428 [ 2.161619] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.05
  1429. 1429 [ 2.161653] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1430. 1430 [ 2.161666] usb usb3: Product: Generic Platform OHCI controller
  1431. 1431 [ 2.161677] usb usb3: Manufacturer: Linux 6.5.2-edge-rockchip64 ohci_hcd
  1432. 1432 [ 2.161687] usb usb3: SerialNumber: fd840000.usb
  1433. 1433 [ 2.162618] hub 3-0:1.0: USB hub found
  1434. 1434 [ 2.162702] hub 3-0:1.0: 1 port detected
  1435. 1435 [ 2.165558] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.05
  1436. 1436 [ 2.165582] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1437. 1437 [ 2.165594] usb usb6: Product: Generic Platform OHCI controller
  1438. 1438 [ 2.165605] usb usb6: Manufacturer: Linux 6.5.2-edge-rockchip64 ohci_hcd
  1439. 1439 [ 2.165615] usb usb6: SerialNumber: fd8c0000.usb
  1440. 1440 [ 2.166524] hub 6-0:1.0: USB hub found
  1441. 1441 [ 2.166593] hub 6-0:1.0: 1 port detected
  1442. 1442 [ 2.168040] rk808-regulator rk808-regulator: there is no dvs0 gpio
  1443. 1443 [ 2.168084] rk808-regulator rk808-regulator: there is no dvs1 gpio
  1444. 1444 [ 2.168098] rk808-regulator rk808-regulator: max buck steps per change: 8
  1445. 1445 [ 2.203296] Freeing initrd memory: 21296K
  1446. 1446 [ 2.205117] vccio_acodec: Bringing 3300000uV into 3000000-3000000uV
  1447. 1447 [ 2.243189] input: rk805 pwrkey as /devices/platform/fdd40000.i2c/i2c-0/0-0020/rk805-pwrkey/input/input0
  1448. 1448 [ 2.255833] rk808-rtc rk808-rtc: registered as rtc0
  1449. 1449 [ 2.258593] rk808-rtc rk808-rtc: setting system clock to 2023-10-22T21:58:38 UTC (1698011918)
  1450. 1450 [ 2.263934] rockchip-thermal fe710000.tsadc: Missing tshut mode property, using default (gpio)
  1451. 1451 [ 2.263968] rockchip-thermal fe710000.tsadc: Missing tshut-polarity property, using default (low)
  1452. 1452 [ 2.269870] sdhci: Secure Digital Host Controller Interface driver
  1453. 1453 [ 2.269894] sdhci: Copyright(c) Pierre Ossman
  1454. 1454 [ 2.269953] Synopsys Designware Multimedia Card Interface Driver
  1455. 1455 [ 2.271579] sdhci-pltfm: SDHCI platform and OF driver helper
  1456. 1456 [ 2.273346] dwmmc_rockchip fe2b0000.mmc: IDMAC supports 32-bit address mode.
  1457. 1457 [ 2.273346] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
  1458. 1458 [ 2.273407] dwmmc_rockchip fe2b0000.mmc: Using internal DMA controller.
  1459. 1459 [ 2.273408] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
  1460. 1460 [ 2.273422] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
  1461. 1461 [ 2.273427] dwmmc_rockchip fe2b0000.mmc: Version ID is 270a
  1462. 1462 [ 2.273524] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 65,32 bit host data width,256 deep fifo
  1463. 1463 [ 2.273568] dwmmc_rockchip fe2b0000.mmc: DW MMC controller at irq 66,32 bit host data width,256 deep fifo
  1464. 1464 [ 2.274085] dwmmc_rockchip fe2c0000.mmc: allocated mmc-pwrseq
  1465. 1465 [ 2.274108] mmc_host mmc2: card is non-removable.
  1466. 1466 [ 2.275960] ledtrig-cpu: registered to indicate activity on CPUs
  1467. 1467 [ 2.277317] scmi_protocol scmi_dev.1: Enabled polling mode TX channel - prot_id:16
  1468. 1468 [ 2.277901] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
  1469. 1469 [ 2.277997] arm-scmi firmware:scmi: Malformed reply - real_sz:8 calc_sz:4 (loop_num_ret:3)
  1470. 1470 [ 2.278015] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
  1471. 1471 [ 2.280308] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
  1472. 1472 [ 2.280797] hid: raw HID events driver (C) Jiri Kosina
  1473. 1473 [ 2.280984] usbcore: registered new interface driver usbhid
  1474. 1474 [ 2.280995] usbhid: USB HID core driver
  1475. 1475 [ 2.288414] mmc_host mmc1: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
  1476. 1476 [ 2.289041] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counters available
  1477. 1477 [ 2.291564] drop_monitor: Initializing network drop monitor service
  1478. 1478 [ 2.291996] NET: Registered PF_INET6 protocol family
  1479. 1479 [ 2.308574] mmc0: SDHCI controller on fe310000.mmc [fe310000.mmc] using ADMA
  1480. 1480 [ 2.366440] Segment Routing with IPv6
  1481. 1481 [ 2.366553] In-situ OAM (IOAM) with IPv6
  1482. 1482 [ 2.366699] NET: Registered PF_PACKET protocol family
  1483. 1483 [ 2.366986] 8021q: 802.1Q VLAN Support v1.8
  1484. 1484 [ 2.367125] Key type dns_resolver registered
  1485. 1485 [ 2.383055] mmc_host mmc1: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
  1486. 1486 [ 2.383098] registered taskstats version 1
  1487. 1487 [ 2.383312] Loading compiled-in X.509 certificates
  1488. 1488 [ 2.384627] dwmmc_rockchip fe2b0000.mmc: All phases bad!
  1489. 1489 [ 2.384651] mmc1: tuning execution failed: -5
  1490. 1490 [ 2.384681] mmc1: error -5 whilst initialising SD card
  1491. 1491 [ 2.388598] zswap: loaded using pool zstd/z3fold
  1492. 1492 [ 2.407108] Key type .fscrypt registered
  1493. 1493 [ 2.407135] Key type fscrypt-provisioning registered
  1494. 1494 [ 2.411167] Btrfs loaded, zoned=yes, fsverity=yes
  1495. 1495 [ 2.411452] Key type encrypted registered
  1496. 1496 [ 2.411481] AppArmor: AppArmor sha1 policy hashing enabled
  1497. 1497 [ 2.414798] mmc_host mmc1: Bus speed (slot 0) = 375000Hz (slot req 375000Hz, actual 375000HZ div = 0)
  1498. 1498 [ 2.487316] rockchip-drm display-subsystem: bound fe040000.vop (ops vop2_component_ops)
  1499. 1499 [ 2.489402] dwhdmi-rockchip fe0a0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
  1500. 1500 [ 2.490821] dwhdmi-rockchip fe0a0000.hdmi: registered DesignWare HDMI I2C bus driver
  1501. 1501 [ 2.491651] rockchip-drm display-subsystem: bound fe0a0000.hdmi (ops dw_hdmi_rockchip_ops)
  1502. 1502 [ 2.492659] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
  1503. 1503 [ 2.497326] mmc_host mmc2: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
  1504. 1504 [ 2.513568] mmc0: Failed to initialize a non-removable card
  1505. 1505 [ 2.514399] mmc_host mmc1: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
  1506. 1506 [ 2.545378] mmc_host mmc2: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
  1507. 1507 [ 2.597273] Console: switching to colour frame buffer device 160x64
  1508. 1508 [ 2.621737] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device
  1509. 1509 [ 2.623315] WCN: marlin_init entry!
  1510. 1510 [ 2.623887] WCN: marlin_parse_dt chip_en gpio=27
  1511. 1511 [ 2.623907] WCN_ERR: gpio chip_en request err: 27
  1512. 1512 [ 2.623933] WCN: marlin_parse_dt reset gpio=79
  1513. 1513 [ 2.623973] WCN: wcn config keep power on
  1514. 1514 [ 2.624566] sdiohal:sdiohal_parse_dt adma_tx:0, adma_rx:0, pwrseq:0, irq type:data, gpio_num:0, blksize:512
  1515. 1515 [ 2.624584] sdiohal:not config sdio host node.
  1516. 1516 [ 2.628844] sdiohal:sdiohal_init ok
  1517. 1517 [ 2.630118] WCN: marlin_probe ok!
  1518. 1518 [ 2.630892] of_cfs_init
  1519. 1519 [ 2.630958] of_cfs_init: OK
  1520. 1520 [ 2.631246] clk: Disabling unused clocks
  1521. 1521 [ 2.636126] Freeing unused kernel memory: 4608K
  1522. 1522 [ 2.653351] usb 6-1: new low-speed USB device number 2 using ohci-platform
  1523. 1523 [ 2.657359] Run /init as init process
  1524. 1524 [ 2.657375] with arguments:
  1525. 1525 [ 2.657383] /init
  1526. 1526 [ 2.657391] with environment:
  1527. 1527 [ 2.657398] HOME=/
  1528. 1528 [ 2.657404] TERM=linux
  1529. 1529 [ 2.657410] splash=verbose
  1530. 1530 [ 2.657416] ubootpart=f43e2cad-e8ba-2e42-bfec-f98a7e1ef320
  1531. 1531 [ 2.657424] cgroup_enable=memory
  1532. 1532 [ 2.657430] cgroup_memory=1
  1533. 1533 [ 2.665841] dwmmc_rockchip fe2b0000.mmc: Successfully tuned phase to 280
  1534. 1534 [ 2.665905] mmc1: new ultra high speed SDR104 SDHC card at address aaaa
  1535. 1535 [ 2.667678] mmcblk1: mmc1:aaaa SE32G 29.7 GiB
  1536. 1536 [ 2.676134] mmcblk1: p1
  1537. 1537 [ 2.849487] dwmmc_rockchip fe2c0000.mmc: Successfully tuned phase to 186
  1538. 1538 [ 2.851757] mmc2: new ultra high speed SDR104 SDIO card at address 8800
  1539. 1539 [ 2.881385] usb 6-1: New USB device found, idVendor=c0f4, idProduct=05e0, bcdDevice= 1.10
  1540. 1540 [ 2.881420] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  1541. 1541 [ 2.881433] usb 6-1: Product: usb keyboard
  1542. 1542 [ 2.881443] usb 6-1: Manufacturer: SZH
  1543. 1543 [ 2.890004] input: SZH usb keyboard as /devices/platform/fd8c0000.usb/usb6/6-1/6-1:1.0/0003:C0F4:05E0.0001/input/input1
  1544. 1544 [ 2.950521] hid-generic 0003:C0F4:05E0.0001: input,hidraw0: USB HID v1.10 Keyboard [SZH usb keyboard] on usb-fd8c0000.usb-1/input0
  1545. 1545 [ 2.956979] input: SZH usb keyboard Consumer Control as /devices/platform/fd8c0000.usb/usb6/6-1/6-1:1.1/0003:C0F4:05E0.0002/input/input2
  1546. 1546 [ 3.014118] input: SZH usb keyboard System Control as /devices/platform/fd8c0000.usb/usb6/6-1/6-1:1.1/0003:C0F4:05E0.0002/input/input3
  1547. 1547 [ 3.014727] hid-generic 0003:C0F4:05E0.0002: input,hidraw1: USB HID v1.10 Device [SZH usb keyboard] on usb-fd8c0000.usb-1/input1
  1548. 1548 [ 3.876703] rk_gmac-dwmac fe010000.ethernet: IRQ eth_lpi not found
  1549. 1549 [ 3.886197] rk_gmac-dwmac fe010000.ethernet: supply phy not found, using dummy regulator
  1550. 1550 [ 3.886558] rk_gmac-dwmac fe010000.ethernet: clock input or output? (input).
  1551. 1551 [ 3.886580] rk_gmac-dwmac fe010000.ethernet: TX delay(0x30).
  1552. 1552 [ 3.886594] rk_gmac-dwmac fe010000.ethernet: RX delay(0x10).
  1553. 1553 [ 3.886623] rk_gmac-dwmac fe010000.ethernet: integrated PHY? (no).
  1554. 1554 [ 3.886725] rk_gmac-dwmac fe010000.ethernet: clock input from PHY
  1555. 1555 [ 3.906815] rk_gmac-dwmac fe010000.ethernet: init for RGMII
  1556. 1556 [ 3.909793] rk_gmac-dwmac fe010000.ethernet: User ID: 0x30, Synopsys ID: 0x51
  1557. 1557 [ 3.909842] rk_gmac-dwmac fe010000.ethernet: DWMAC4/5
  1558. 1558 [ 3.909857] rk_gmac-dwmac fe010000.ethernet: DMA HW capability register supported
  1559. 1559 [ 3.909867] rk_gmac-dwmac fe010000.ethernet: RX Checksum Offload Engine supported
  1560. 1560 [ 3.909877] rk_gmac-dwmac fe010000.ethernet: TX Checksum insertion supported
  1561. 1561 [ 3.909885] rk_gmac-dwmac fe010000.ethernet: Wake-Up On Lan supported
  1562. 1562 [ 3.910053] rk_gmac-dwmac fe010000.ethernet: TSO supported
  1563. 1563 [ 3.910069] rk_gmac-dwmac fe010000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  1564. 1564 [ 3.910113] rk_gmac-dwmac fe010000.ethernet: device MAC address e2:7e:bb:cb:04:08
  1565. 1565 [ 3.910131] rk_gmac-dwmac fe010000.ethernet: Enabled RFS Flow TC (entries=10)
  1566. 1566 [ 3.910146] rk_gmac-dwmac fe010000.ethernet: TSO feature enabled
  1567. 1567 [ 3.910156] rk_gmac-dwmac fe010000.ethernet: Using 32/32 bits DMA host/device width
  1568. 1568 [ 3.943405] spi-nor spi4.0: spi-nor-generic (16384 Kbytes)
  1569. 1569 [ 4.218149] rk_gmac-dwmac fe010000.ethernet end0: renamed from eth0
  1570. 1570 [ 4.602567] EXT4-fs (mmcblk1p1): mounted filesystem 50b1c2a8-fc2a-47b5-a6f0-3ea23edcd51d ro with writeback data mode. Quota mode: none.
  1571. 1571 [ 5.288863] systemd[1]: Inserted module 'autofs4'
  1572. 1572 [ 5.349603] systemd[1]: systemd 252.12-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
  1573. 1573 [ 5.349665] systemd[1]: Detected architecture arm64.
  1574. 1574 [ 5.356243] systemd[1]: Hostname set to <orangepi3b>.
  1575. 1575 [ 5.797707] (sd-execut[198]: /usr/lib/systemd/system-generators/netplan failed with exit status 1.
  1576. 1576 [ 6.411125] systemd[1]: Queued start job for default target graphical.target.
  1577. 1577 [ 6.453538] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
  1578. 1578 [ 6.457721] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
  1579. 1579 [ 6.461401] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty.
  1580. 1580 [ 6.464175] systemd[1]: Created slice user.slice - User and Session Slice.
  1581. 1581 [ 6.465153] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
  1582. 1582 [ 6.467018] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
  1583. 1583 [ 6.467671] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
  1584. 1584 [ 6.468281] systemd[1]: Reached target slices.target - Slice Units.
  1585. 1585 [ 6.468643] systemd[1]: Reached target swap.target - Swaps.
  1586. 1586 [ 6.468960] systemd[1]: Reached target time-set.target - System Time Set.
  1587. 1587 [ 6.469613] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
  1588. 1588 [ 6.502936] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket.
  1589. 1589 [ 6.504785] systemd[1]: Listening on syslog.socket - Syslog Socket.
  1590. 1590 [ 6.506334] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
  1591. 1591 [ 6.507218] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
  1592. 1592 [ 6.509470] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
  1593. 1593 [ 6.510944] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
  1594. 1594 [ 6.512530] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
  1595. 1595 [ 6.514443] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
  1596. 1596 [ 6.515771] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
  1597. 1597 [ 6.524620] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
  1598. 1598 [ 6.533759] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
  1599. 1599 [ 6.543478] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
  1600. 1600 [ 6.552981] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
  1601. 1601 [ 6.554617] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
  1602. 1602 [ 6.566921] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock...
  1603. 1603 [ 6.577791] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
  1604. 1604 [ 6.588158] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
  1605. 1605 [ 6.599457] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
  1606. 1606 [ 6.611644] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
  1607. 1607 [ 6.633096] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
  1608. 1608 [ 6.643776] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
  1609. 1609 [ 6.655266] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
  1610. 1610 [ 6.667220] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
  1611. 1611 [ 6.668987] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
  1612. 1612 [ 6.669673] device-mapper: uevent: version 1.0.3
  1613. 1613 [ 6.670866] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
  1614. 1614 [ 6.688441] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
  1615. 1615 [ 6.698589] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
  1616. 1616 [ 6.709193] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
  1617. 1617 [ 6.728341] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
  1618. 1618 [ 6.731571] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
  1619. 1619 [ 6.735571] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
  1620. 1620 [ 6.739164] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
  1621. 1621 [ 6.744226] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock.
  1622. 1622 [ 6.750098] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
  1623. 1623 [ 6.755657] systemd[1]: modprobe@configfs.service: Deactivated successfully.
  1624. 1624 [ 6.757414] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
  1625. 1625 [ 6.761488] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
  1626. 1626 [ 6.763239] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
  1627. 1627 [ 6.768855] systemd[1]: modprobe@drm.service: Deactivated successfully.
  1628. 1628 [ 6.771116] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
  1629. 1629 [ 6.775438] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
  1630. 1630 [ 6.776469] EXT4-fs (mmcblk1p1): re-mounted 50b1c2a8-fc2a-47b5-a6f0-3ea23edcd51d r/w. Quota mode: none.
  1631. 1631 [ 6.778260] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
  1632. 1632 [ 6.789123] systemd[1]: modprobe@fuse.service: Deactivated successfully.
  1633. 1633 [ 6.791106] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
  1634. 1634 [ 6.796157] systemd[1]: modprobe@loop.service: Deactivated successfully.
  1635. 1635 [ 6.798126] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
  1636. 1636 [ 6.801951] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
  1637. 1637 [ 6.838864] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
  1638. 1638 [ 6.860385] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
  1639. 1639 [ 6.870672] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
  1640. 1640 [ 6.881322] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  1641. 1641 [ 6.882487] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed...
  1642. 1642 [ 6.883180] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  1643. 1643 [ 6.885140] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
  1644. 1644 [ 6.892534] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
  1645. 1645 [ 6.904166] systemd[1]: Starting systemd-sysusers.service - Create System Users...
  1646. 1646 [ 6.914986] WCN: start_marlin [MARLIN_WIFI]
  1647. 1647 [ 6.915016] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1
  1648. 1648 [ 6.915028] WCN: the first power on start
  1649. 1649 [ 6.920859] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
  1650. 1650 [ 6.941401] sdiohal:sdiohal_scan_card
  1651. 1651 [ 6.941733] sdiohal:sdiohal_probe: func->class=0, vendor=0x0000, device=0x0000, func_num=0x0001, clock=150000000
  1652. 1652 [ 6.941968] sdiohal err:dt readl fail ret:-110, system_addr=0x4082c208
  1653. 1653 [ 6.941983] sdiohal:sdio dump_aon_reg entry
  1654. 1654 [ 6.942016] sdiohal:pmu sdio status:[0x140]:0xe1
  1655. 1655 [ 6.942051] sdiohal:pmu sdio status:[0x141]:0x3c
  1656. 1656 [ 6.942084] sdiohal:pmu sdio status:[0x142]:0xf
  1657. 1657 [ 6.942116] sdiohal:pmu sdio status:[0x143]:0x0
  1658. 1658 [ 6.942148] sdiohal:pmu sdio status:[0x144]:0x0
  1659. 1659 [ 6.942179] sdiohal:pmu sdio status:[0x145]:0x0
  1660. 1660 [ 6.942210] sdiohal:pmu sdio status:[0x146]:0x0
  1661. 1661 [ 6.942242] sdiohal:pmu sdio status:[0x147]:0x0
  1662. 1662 [ 6.942274] sdiohal:pmu sdio status:[0x148]:0x66
  1663. 1663 [ 6.942305] sdiohal:pmu sdio status:[0x149]:0x0
  1664. 1664 [ 6.942337] sdiohal:pmu sdio status:[0x14a]:0x0
  1665. 1665 [ 6.942368] sdiohal:pmu sdio status:[0x14b]:0x0
  1666. 1666 [ 6.942487] sdiohal:pmu sdio status:[0x14c]:0x0
  1667. 1667 [ 6.942528] sdiohal:pmu sdio status:[0x14d]:0x0
  1668. 1668 [ 6.942564] sdiohal:pmu sdio status:[0x14e]:0x0
  1669. 1669 [ 6.942599] sdiohal:pmu sdio status:[0x14f]:0x0
  1670. 1670 [ 6.942718] sdiohal:cm4d haddr 0:[0x144]:0x0
  1671. 1671 [ 6.942756] sdiohal:cm4d haddr 0:[0x145]:0x0
  1672. 1672 [ 6.942791] sdiohal:cm4d haddr 0:[0x146]:0x0
  1673. 1673 [ 6.942828] sdiohal:cm4d haddr 0:[0x147]:0x0
  1674. 1674 [ 6.942949] sdiohal:cm4i haddr 1:[0x144]:0x0
  1675. 1675 [ 6.942988] sdiohal:cm4i haddr 1:[0x145]:0x0
  1676. 1676 [ 6.943025] sdiohal:cm4i haddr 1:[0x146]:0x0
  1677. 1677 [ 6.943061] sdiohal:cm4i haddr 1:[0x147]:0x0
  1678. 1678 [ 6.943175] sdiohal:cm4s haddr 2:[0x144]:0x0
  1679. 1679 [ 6.943209] sdiohal:cm4s haddr 2:[0x145]:0x0
  1680. 1680 [ 6.943243] sdiohal:cm4s haddr 2:[0x146]:0x0
  1681. 1681 [ 6.943276] sdiohal:cm4s haddr 2:[0x147]:0x0
  1682. 1682 [ 6.943390] sdiohal:dmaw haddr 3:[0x144]:0x0
  1683. 1683 [ 6.943425] sdiohal:dmaw haddr 3:[0x145]:0x0
  1684. 1684 [ 6.943458] sdiohal:dmaw haddr 3:[0x146]:0x0
  1685. 1685 [ 6.943492] sdiohal:dmaw haddr 3:[0x147]:0x0
  1686. 1686 [ 6.943605] sdiohal:dmar haddr 4:[0x144]:0x0
  1687. 1687 [ 6.943640] sdiohal:dmar haddr 4:[0x145]:0x0
  1688. 1688 [ 6.943675] sdiohal:dmar haddr 4:[0x146]:0x0
  1689. 1689 [ 6.943709] sdiohal:dmar haddr 4:[0x147]:0x0
  1690. 1690 [ 6.943823] sdiohal:aon_to_ahb haddr 5:[0x144]:0x0
  1691. 1691 [ 6.943857] sdiohal:aon_to_ahb haddr 5:[0x145]:0x0
  1692. 1692 [ 6.943892] sdiohal:aon_to_ahb haddr 5:[0x146]:0x0
  1693. 1693 [ 6.943926] sdiohal:aon_to_ahb haddr 5:[0x147]:0x0
  1694. 1694 [ 6.944042] sdiohal:axi_to_ahb haddr 6:[0x144]:0x0
  1695. 1695 [ 6.944076] sdiohal:axi_to_ahb haddr 6:[0x145]:0x0
  1696. 1696 [ 6.944110] sdiohal:axi_to_ahb haddr 6:[0x146]:0x0
  1697. 1697 [ 6.944143] sdiohal:axi_to_ahb haddr 6:[0x147]:0x0
  1698. 1698 [ 6.944257] sdiohal:hready_status haddr 7:[0x144]:0xff
  1699. 1699 [ 6.944291] sdiohal:hready_status haddr 7:[0x145]:0xff
  1700. 1700 [ 6.944325] sdiohal:hready_status haddr 7:[0x146]:0xfb
  1701. 1701 [ 6.944360] sdiohal:hready_status haddr 7:[0x147]:0x10
  1702. 1702 [ 6.944370] sdiohal:val:0x3c
  1703. 1703 [ 6.944377] sdiohal:sdio dump_aon_reg end
  1704. 1704
  1705. 1705 [ 6.944382] sdiohal:sdiohal_abort
  1706. 1706 [ 6.944407] sdiohal:before abort, SDIO_VER_CCCR:0x43
  1707. 1707 [ 6.944444] sdiohal:after abort, SDIO_VER_CCCR:0x43
  1708. 1708 [ 6.944457] WCN_ERR: read marlin3E chip id fail, ret=-110
  1709. 1709 [ 6.944506] WCN: marlin_scan_finish!
  1710. 1710 [ 6.944515] sdiohal:probe ok
  1711. 1711 [ 6.944740] sdiohal:scan end!
  1712. 1712 [ 6.944756] WCN: then marlin start to download
  1713. 1713 [ 6.944802] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start!
  1714. 1714 [ 6.949062] kworker/0:3: vmalloc error: size 18446744073709551615, exceeds total pages, mode:0xcc0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0
  1715. 1715 [ 6.949147] CPU: 0 PID: 73 Comm: kworker/0:3 Not tainted 6.5.2-edge-rockchip64 #1
  1716. 1716 [ 6.949162] Hardware name: Rockchip RK3566 OPi 3B (DT)
  1717. 1717 [ 6.949173] Workqueue: events pre_btwifi_download_sdio
  1718. 1718 [ 6.949205] Call trace:
  1719. 1719 [ 6.949212] dump_backtrace+0x94/0x114
  1720. 1720 [ 6.949230] show_stack+0x18/0x24
  1721. 1721 [ 6.949241] dump_stack_lvl+0x48/0x60
  1722. 1722 [ 6.949260] dump_stack+0x18/0x24
  1723. 1723 [ 6.949273] warn_alloc+0x118/0x1b0
  1724. 1724 [ 6.949290] __vmalloc_node_range+0x724/0x770
  1725. 1725 [ 6.949302] vmalloc+0x5c/0x6c
  1726. 1726 [ 6.949312] load_firmware_data_path+0x64/0x220
  1727. 1727 [ 6.949327] pre_btwifi_download_sdio+0xe8/0x182c
  1728. 1728 [ 6.949341] process_one_work+0x214/0x4a0
  1729. 1729 [ 6.949355] worker_thread+0x6c/0x430
  1730. 1730 [ 6.949366] kthread+0x104/0x108
  1731. 1731 [ 6.949377] ret_from_fork+0x10/0x20
  1732. 1732 [ 6.949422] Mem-Info:
  1733. 1733 [ 6.949438] active_anon:1452 inactive_anon:51 isolated_anon:0
  1734. 1734 active_file:5223 inactive_file:2845 isolated_file:0
  1735. 1735 unevictable:2027 dirty:0 writeback:0
  1736. 1736 slab_reclaimable:4862 slab_unreclaimable:5639
  1737. 1737 mapped:3075 shmem:1324 pagetables:99
  1738. 1738 sec_pagetables:0 bounce:0
  1739. 1739 kernel_misc_reclaimable:0
  1740. 1740 free:458521 free_pcp:2123 free_cma:30716
  1741. 1741 [ 6.949466] Node 0 active_anon:5808kB inactive_anon:204kB active_file:20892kB inactive_file:11380kB unevictable:8108kB isolated(anon):0kB isolated(file):0kB mapped:12300kB dirty:0kB writeback:0kB shmem:5296kB shmem_thp: 0kB shmem_pmdmapped: 0kB anon_thp: 0kB writeback_tmp:0kB kernel_stack:1952kB pagetables:396kB sec_pagetables:0kB all_unreclaimable? no
  1742. 1742 [ 6.949490] Node 0 DMA free:1834084kB boost:0kB min:22528kB low:28160kB high:33792kB reserved_highatomic:0KB active_anon:5808kB inactive_anon:204kB active_file:20892kB inactive_file:11380kB unevictable:8108kB writepending:0kB present:2095104kB managed:1961440kB mlocked:0kB bounce:0kB free_pcp:8556kB local_pcp:1772kB free_cma:122864kB
  1743. 1743 [ 6.949520] lowmem_reserve[]: 0 0 0 0
  1744. 1744 [ 6.949543] Node 0 DMA: 1*4kB (U) 2*8kB (UE) 3*16kB (UMC) 3*32kB (UEC) 3*64kB (UEC) 4*128kB (UEC) 21*256kB (UC) 22*512kB (UC) 14*1024kB (UEC) 8*2048kB (UMEC) 436*4096kB (UMC) = 1834084kB
  1745. 1745 [ 6.949664] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=1048576kB
  1746. 1746 [ 6.949676] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=32768kB
  1747. 1747 [ 6.949685] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB
  1748. 1748 [ 6.949695] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=64kB
  1749. 1749 [ 6.949703] 10145 total pagecache pages
  1750. 1750 [ 6.949710] 0 pages in swap cache
  1751. 1751 [ 6.949716] Free swap = 0kB
  1752. 1752 [ 6.949721] Total swap = 0kB
  1753. 1753 [ 6.949728] 523776 pages RAM
  1754. 1754 [ 6.949733] 0 pages HighMem/MovableOnly
  1755. 1755 [ 6.949739] 33416 pages reserved
  1756. 1756 [ 6.949744] 32768 pages cma reserved
  1757. 1757 [ 6.949759] WCN_ERR: no memory for image
  1758. 1758 [ 6.949768] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start!
  1759. 1759 [ 6.949820] WCN_ERR: no memory for image
  1760. 1760 [ 6.949830] WCN: marlin_request_firmware from (null)wcnmodem.bin start!
  1761. 1761 [ 6.966469] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
  1762. 1762 [ 7.024573] systemd[1]: Finished systemd-sysusers.service - Create System Users.
  1763. 1763 [ 7.066366] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
  1764. 1764 [ 7.102880] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout.
  1765. 1765 [ 7.184972] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev.
  1766. 1766 [ 7.197310] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems.
  1767. 1767 [ 7.230021] systemd[1]: Mounting tmp.mount - /tmp...
  1768. 1768 [ 7.249645] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files...
  1769. 1769 [ 7.266904] systemd[1]: Mounted tmp.mount - /tmp.
  1770. 1770 [ 7.279291] systemd[1]: Reached target local-fs.target - Local File Systems.
  1771. 1771 [ 7.318441] systemd[1]: Starting armbian-zram-config.service - Armbian ZRAM config...
  1772. 1772 [ 7.346023] systemd[1]: Starting console-setup.service - Set console font and keymap...
  1773. 1773 [ 7.366720] systemd[1]: Starting plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data...
  1774. 1774 [ 7.404359] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats...
  1775. 1775 [ 7.410388] systemd[1]: Finished console-setup.service - Set console font and keymap.
  1776. 1776 [ 7.443839] systemd[1]: Received SIGRTMIN+20 from PID 161 (plymouthd).
  1777. 1777 [ 7.460803] systemd[1]: Finished plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data.
  1778. 1778 [ 7.469011] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 271 (systemd-binfmt)
  1779. 1779 [ 7.679150] zram: Added device: zram0
  1780. 1780 [ 7.680377] zram: Added device: zram1
  1781. 1781 [ 7.682307] zram: Added device: zram2
  1782. 1782 [ 7.700412] systemd[1]: Started systemd-udevd.service - Rule-based Manager for Device Events and Files.
  1783. 1783 [ 7.758095] systemd[1]: Mounting proc-sys-fs-binfmt_misc.mount - Arbitrary Executable File Formats File System...
  1784. 1784 [ 7.808897] systemd[1]: Listening on systemd-rfkill.socket - Load/Save RF Kill Switch Status /dev/rfkill Watch.
  1785. 1785 [ 7.840646] systemd[1]: Mounted proc-sys-fs-binfmt_misc.mount - Arbitrary Executable File Formats File System.
  1786. 1786 [ 7.864404] systemd[1]: Finished systemd-binfmt.service - Set Up Additional Binary Formats.
  1787. 1787 [ 7.909508] zram0: detected capacity change from 0 to 1961440
  1788. 1788 [ 7.969314] WCN_ERR: load_firmware_data_path: open file (null)wcnmodem.bin error
  1789. 1789 [ 7.969347] WCN: marlin_request_firmware from (null)wcnmodem.bin start!
  1790. 1790 [ 8.145394] systemd[1]: Finished systemd-udev-trigger.service - Coldplug All udev Devices.
  1791. 1791 [ 8.190554] systemd[1]: Starting ifupdown-pre.service - Helper to synchronize boot up for ifupdown...
  1792. 1792 [ 8.214804] systemd[1]: Starting plymouth-start.service - Show Plymouth Boot Screen...
  1793. 1793 [ 8.230676] systemd[1]: Finished ifupdown-pre.service - Helper to synchronize boot up for ifupdown.
  1794. 1794 [ 8.293416] systemd[1]: Found device dev-ttyS2.device - /dev/ttyS2.
  1795. 1795 [ 8.313404] systemd[1]: Started plymouth-start.service - Show Plymouth Boot Screen.
  1796. 1796 [ 8.412862] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid).
  1797. 1797 [ 8.414290] systemd[1]: Started systemd-ask-password-plymouth.path - Forward Password Requests to Plymouth Directory Watch.
  1798. 1798 [ 8.424997] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
  1799. 1799 [ 8.431592] systemd[1]: Reached target paths.target - Path Units.
  1800. 1800 [ 8.904327] panfrost fde60000.gpu: clock rate = 594000000
  1801. 1801 [ 8.904370] panfrost fde60000.gpu: bus_clock rate = 500000000
  1802. 1802 [ 8.907799] mc: Linux media interface: v0.10
  1803. 1803 [ 8.921585] panfrost fde60000.gpu: mali-g52 id 0x7402 major 0x1 minor 0x0 status 0x0
  1804. 1804 [ 8.921607] panfrost fde60000.gpu: features: 00000000,00000cf7, issues: 00000000,00000400
  1805. 1805 [ 8.921615] panfrost fde60000.gpu: Features: L2:0x07110206 Shader:0x00000002 Tiler:0x00000209 Mem:0x1 MMU:0x00002823 AS:0xff JS:0x7
  1806. 1806 [ 8.921622] panfrost fde60000.gpu: shader_present=0x1 l2_present=0x1
  1807. 1807 [ 8.923870] [drm] Initialized panfrost 1.2.0 20180908 for fde60000.gpu on minor 1
  1808. 1808 [ 8.942256] videodev: Linux video capture interface: v2.00
  1809. 1809 [ 8.959568] rockchip-rga fdeb0000.rga: HW Version: 0x03.02
  1810. 1810 [ 8.960314] rockchip-rga fdeb0000.rga: Registered rockchip-rga as /dev/video0
  1811. 1811 [ 8.976167] hantro-vpu fdea0000.video-codec: Adding to iommu group 0
  1812. 1812 [ 8.985786] hantro-vpu fdea0000.video-codec: registered rockchip,rk3568-vpu-dec as /dev/video1
  1813. 1813 [ 8.991469] hantro-vpu fdee0000.video-codec: Adding to iommu group 1
  1814. 1814 [ 8.997302] WCN_ERR: load_firmware_data_path: open file (null)wcnmodem.bin error
  1815. 1815 [ 8.997323] WCN_ERR: btwifi_download_firmware request firmware error
  1816. 1816 [ 8.999086] hantro-vpu fdee0000.video-codec: registered rockchip,rk3568-vepu-enc as /dev/video2
  1817. 1817 [ 9.559498] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid).
  1818. 1818 [ 9.600502] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
  1819. 1819 [ 9.607411] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
  1820. 1820 [ 9.615944] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
  1821. 1821 [ 9.625829] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
  1822. 1822 [ 9.627175] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
  1823. 1823 [ 9.637880] systemd[1]: modprobe@loop.service: Deactivated successfully.
  1824. 1824 [ 9.638938] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
  1825. 1825 [ 9.642769] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
  1826. 1826 [ 9.643863] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
  1827. 1827 [ 9.645743] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
  1828. 1828 [ 9.646037] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
  1829. 1829 [ 10.181230] random: crng init done
  1830. 1830 [ 10.194796] systemd[1]: Finished systemd-random-seed.service - Load/Save Random Seed.
  1831. 1831 [ 10.197507] systemd[1]: first-boot-complete.target - First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes).
  1832. 1832 [ 10.197978] systemd[1]: systemd-machine-id-commit.service - Commit a transient machine-id on disk was skipped because of an unmet condition check (ConditionPathIsMountPoint=/etc/machine-id).
  1833. 1833 [ 10.330811] Adding 980716k swap on /dev/zram0. Priority:5 extents:1 across:980716k SSFS
  1834. 1834 [ 10.551430] zram1: detected capacity change from 0 to 102400
  1835. 1835 [ 10.608379] systemd[1]: Finished armbian-zram-config.service - Armbian ZRAM config.
  1836. 1836 [ 10.652234] systemd[1]: Starting armbian-ramlog.service - Armbian memory supported logging...
  1837. 1837 [ 10.733317] EXT4-fs (zram1): mounted filesystem eeecba9c-53ce-4e2b-ac0f-250eafdcbf93 r/w without journal. Quota mode: none.
  1838. 1838 [ 12.855734] systemd[1]: Finished armbian-ramlog.service - Armbian memory supported logging.
  1839. 1839 [ 12.896274] systemd[1]: Starting systemd-journald.service - Journal Service...
  1840. 1840 [ 13.128672] systemd[1]: Started systemd-journald.service - Journal Service.
  1841. 1841 [ 13.210097] systemd-journald[477]: Received client request to flush runtime journal.
  1842. 1842 [ 13.522688] RPC: Registered named UNIX socket transport module.
  1843. 1843 [ 13.522714] RPC: Registered udp transport module.
  1844. 1844 [ 13.522722] RPC: Registered tcp transport module.
  1845. 1845 [ 13.522729] RPC: Registered tcp-with-tls transport module.
  1846. 1846 [ 13.522734] RPC: Registered tcp NFSv4.1 backchannel transport module.
  1847. 1847 [ 37.857365] WCN_ERR: marlin download timeout
  1848. 1848 [ 37.857401] sdiohal:sdiohal_runtime_put entry
  1849. 1849 [ 37.857611] sdiohal:sdiohal_runtime_put wait xmit_cnt end
  1850. 1850 [ 37.881853] sprdwl:__sprdwl_cmd_getbuf cant't get vif, ctx_id: 0
  1851. 1851 [ 37.882008] sdiohal err:sdiohal_sdio_pt_write xmit_cnt:0 xmit_start:0,not have card
  1852. 1852 [ 37.882019] sdiohal err:tyr send,type:-2115847672 subtype:-32768 node_num:1
  1853. 1853 [ 40.929304] sprdwl:[WIFI_CMD_SYNC_VERSION]timeout
  1854. 1854 [ 40.929333] sprdwl:ctx_id:0 cmd: WIFI_CMD_SYNC_VERSION[9] rsp timeout (mstime = 37876), num=1
  1855. 1855 [ 40.929365] sprdwl:SYNC CMD ERROR!!
  1856. 1856 [ 40.957492] unisoc_wifi: probe of unisoc_wifi failed with error -1
  1857. 1857
  1858. 1858 ### armbian-release:
  1859. 1859
  1860. 1860 # PLEASE DO NOT EDIT THIS FILE
  1861. 1861 BOARD=orangepi3b
  1862. 1862 BOARD_NAME="orangepi3b"
  1863. 1863 BOARDFAMILY=rk35xx
  1864. 1864 BUILD_REPOSITORY_URL=https://github.com/armbian/build
  1865. 1865 BUILD_REPOSITORY_COMMIT=5382fbdd
  1866. 1866 LINUXFAMILY=rockchip64
  1867. 1867 ARCH=arm64
  1868. 1868 IMAGE_TYPE=stable
  1869. 1869 BOARD_TYPE=csc
  1870. 1870 INITRD_ARCH=arm64
  1871. 1871 KERNEL_IMAGE_TYPE=Image
  1872. 1872 FORCE_BOOTSCRIPT_UPDATE=
  1873. 1873 VENDOR=Armbian
  1874. 1874 BOOTSCRIPT_FORCE_UPDATE="no"
  1875. 1875 BOOTSCRIPT_DST="boot.cmd"
  1876. 1876 VERSION=23.8.2
  1877. 1877 REVISION=23.8.2
  1878. 1878 BRANCH=edge
  1879. 1879
  1880. 1880 ### boot environment:
  1881. 1881
  1882. 1882 verbosity=1
  1883. 1883 bootlogo=false
  1884. 1884 overlay_prefix=rk35xx
  1885. 1885 fdtfile=rockchip/rk3566-orangepi-3b.dtb
  1886. 1886 rootdev=UUID=50b1c2a8-fc2a-47b5-a6f0-3ea23edcd51d
  1887. 1887 rootfstype=ext4
  1888. 1888 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u
  1889. 1889
  1890. 1890 ### lsusb:
  1891. 1891
  1892. 1892 Bus 006 Device 002: ID c0f4:05e0 SZH usb keyboard
  1893. 1893 Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  1894. 1894 Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  1895. 1895 Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  1896. 1896 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  1897. 1897 Bus 007 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
  1898. 1898 Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  1899. 1899 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  1900. 1900
  1901. 1901 ### lscpu:
  1902. 1902
  1903. 1903 Architecture: aarch64
  1904. 1904 CPU op-mode(s): 32-bit, 64-bit
  1905. 1905 Byte Order: Little Endian
  1906. 1906 CPU(s): 4
  1907. 1907 On-line CPU(s) list: 0-3
  1908. 1908 Vendor ID: ARM
  1909. 1909 Model name: Cortex-A55
  1910. 1910 Model: 0
  1911. 1911 Thread(s) per core: 1
  1912. 1912 Core(s) per cluster: 4
  1913. 1913 Socket(s): -
  1914. 1914 Cluster(s): 1
  1915. 1915 Stepping: r2p0
  1916. 1916 CPU(s) scaling MHz: 100%
  1917. 1917 CPU max MHz: 1800.0000
  1918. 1918 CPU min MHz: 408.0000
  1919. 1919 BogoMIPS: 48.00
  1920. 1920 Flags: fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp
  1921. 1921 NUMA node(s): 1
  1922. 1922 NUMA node0 CPU(s): 0-3
  1923. 1923 Vulnerability Gather data sampling: Not affected
  1924. 1924 Vulnerability Itlb multihit: Not affected
  1925. 1925 Vulnerability L1tf: Not affected
  1926. 1926 Vulnerability Mds: Not affected
  1927. 1927 Vulnerability Meltdown: Not affected
  1928. 1928 Vulnerability Mmio stale data: Not affected
  1929. 1929 Vulnerability Retbleed: Not affected
  1930. 1930 Vulnerability Spec rstack overflow: Not affected
  1931. 1931 Vulnerability Spec store bypass: Not affected
  1932. 1932 Vulnerability Spectre v1: Mitigation; __user pointer sanitization
  1933. 1933 Vulnerability Spectre v2: Not affected
  1934. 1934 Vulnerability Srbds: Not affected
  1935. 1935 Vulnerability Tsx async abort: Not affected
  1936. 1936
  1937. 1937 ### cpuinfo:
  1938. 1938
  1939. 1939 processor : 0
  1940. 1940 BogoMIPS : 48.00
  1941. 1941 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp
  1942. 1942 CPU implementer : 0x41
  1943. 1943 CPU architecture: 8
  1944. 1944 CPU variant : 0x2
  1945. 1945 CPU part : 0xd05
  1946. 1946 CPU revision : 0
  1947. 1947
  1948. 1948 processor : 1
  1949. 1949 BogoMIPS : 48.00
  1950. 1950 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp
  1951. 1951 CPU implementer : 0x41
  1952. 1952 CPU architecture: 8
  1953. 1953 CPU variant : 0x2
  1954. 1954 CPU part : 0xd05
  1955. 1955 CPU revision : 0
  1956. 1956
  1957. 1957 processor : 2
  1958. 1958 BogoMIPS : 48.00
  1959. 1959 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp
  1960. 1960 CPU implementer : 0x41
  1961. 1961 CPU architecture: 8
  1962. 1962 CPU variant : 0x2
  1963. 1963 CPU part : 0xd05
  1964. 1964 CPU revision : 0
  1965. 1965
  1966. 1966 processor : 3
  1967. 1967 BogoMIPS : 48.00
  1968. 1968 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp
  1969. 1969 CPU implementer : 0x41
  1970. 1970 CPU architecture: 8
  1971. 1971 CPU variant : 0x2
  1972. 1972 CPU part : 0xd05
  1973. 1973 CPU revision : 0
  1974. 1974
  1975. 1975
  1976. 1976 ### meminfo:
  1977. 1977
  1978. 1978 MemTotal: 1961440 kB
  1979. 1979 MemFree: 1764624 kB
  1980. 1980 MemAvailable: 1776960 kB
  1981. 1981 Buffers: 9740 kB
  1982. 1982 Cached: 62000 kB
  1983. 1983 SwapCached: 0 kB
  1984. 1984 Active: 57760 kB
  1985. 1985 Inactive: 23144 kB
  1986. 1986 Active(anon): 17372 kB
  1987. 1987 Inactive(anon): 408 kB
  1988. 1988 Active(file): 40388 kB
  1989. 1989 Inactive(file): 22736 kB
  1990. 1990 Unevictable: 8108 kB
  1991. 1991 Mlocked: 0 kB
  1992. 1992 SwapTotal: 980716 kB
  1993. 1993 SwapFree: 980716 kB
  1994. 1994 Zswap: 0 kB
  1995. 1995 Zswapped: 0 kB
  1996. 1996 Dirty: 416 kB
  1997. 1997 Writeback: 0 kB
  1998. 1998 AnonPages: 17480 kB
  1999. 1999 Mapped: 16728 kB
  2000. 2000 Shmem: 5504 kB
  2001. 2001 KReclaimable: 22324 kB
  2002. 2002 Slab: 48664 kB
  2003. 2003 SReclaimable: 22324 kB
  2004. 2004 SUnreclaim: 26340 kB
  2005. 2005 KernelStack: 2528 kB
  2006. 2006 PageTables: 1596 kB
  2007. 2007 SecPageTables: 0 kB
  2008. 2008 NFS_Unstable: 0 kB
  2009. 2009 Bounce: 0 kB
  2010. 2010 WritebackTmp: 0 kB
  2011. 2011 CommitLimit: 1961436 kB
  2012. 2012 Committed_AS: 56908 kB
  2013. 2013 VmallocTotal: 133141626880 kB
  2014. 2014 VmallocUsed: 29724 kB
  2015. 2015 VmallocChunk: 0 kB
  2016. 2016 Percpu: 1072 kB
  2017. 2017 AnonHugePages: 0 kB
  2018. 2018 ShmemHugePages: 0 kB
  2019. 2019 ShmemPmdMapped: 0 kB
  2020. 2020 FileHugePages: 0 kB
  2021. 2021 FilePmdMapped: 0 kB
  2022. 2022 CmaTotal: 131072 kB
  2023. 2023 CmaFree: 121328 kB
  2024. 2024 HugePages_Total: 0
  2025. 2025 HugePages_Free: 0
  2026. 2026 HugePages_Rsvd: 0
  2027. 2027 HugePages_Surp: 0
  2028. 2028 Hugepagesize: 2048 kB
  2029. 2029 Hugetlb: 0 kB
  2030. 2030
  2031. 2031 ### virtual memory:
  2032. 2032
  2033. 2033 vm.admin_reserve_kbytes = 8192
  2034. 2034 vm.compaction_proactiveness = 20
  2035. 2035 vm.compact_unevictable_allowed = 1
  2036. 2036 vm.dirty_background_bytes = 0
  2037. 2037 vm.dirty_background_ratio = 10
  2038. 2038 vm.dirty_bytes = 0
  2039. 2039 vm.dirty_expire_centisecs = 3000
  2040. 2040 vm.dirty_ratio = 20
  2041. 2041 vm.dirtytime_expire_seconds = 43200
  2042. 2042 vm.dirty_writeback_centisecs = 500
  2043. 2043 vm.extfrag_threshold = 500
  2044. 2044 vm.hugetlb_shm_group = 0
  2045. 2045 vm.laptop_mode = 0
  2046. 2046 vm.legacy_va_layout = 0
  2047. 2047 vm.lowmem_reserve_ratio = 256 256 32 0
  2048. 2048 vm.max_map_count = 65530
  2049. 2049 vm.memfd_noexec = 0
  2050. 2050 vm.min_free_kbytes = 22528
  2051. 2051 vm.min_slab_ratio = 5
  2052. 2052 vm.min_unmapped_ratio = 1
  2053. 2053 vm.mmap_min_addr = 4096
  2054. 2054 vm.mmap_rnd_bits = 18
  2055. 2055 vm.mmap_rnd_compat_bits = 11
  2056. 2056 vm.nr_hugepages = 0
  2057. 2057 vm.nr_hugepages_mempolicy = 0
  2058. 2058 vm.nr_overcommit_hugepages = 0
  2059. 2059 vm.numa_stat = 1
  2060. 2060 vm.numa_zonelist_order = Node
  2061. 2061 vm.oom_dump_tasks = 1
  2062. 2062 vm.oom_kill_allocating_task = 0
  2063. 2063 vm.overcommit_kbytes = 0
  2064. 2064 vm.overcommit_memory = 0
  2065. 2065 vm.overcommit_ratio = 50
  2066. 2066 vm.page-cluster = 0
  2067. 2067 vm.page_lock_unfairness = 5
  2068. 2068 vm.panic_on_oom = 0
  2069. 2069 vm.percpu_pagelist_high_fraction = 0
  2070. 2070 vm.stat_interval = 1
  2071. 2071 vm.swappiness = 100
  2072. 2072 vm.user_reserve_kbytes = 60053
  2073. 2073 vm.vfs_cache_pressure = 100
  2074. 2074 vm.watermark_boost_factor = 15000
  2075. 2075 vm.watermark_scale_factor = 10
  2076. 2076 vm.zone_reclaim_mode = 0
  2077. 2077
  2078. 2078 ### ip addr:
  2079. 2079
  2080. 2080 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
  2081. 2081 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
  2082. 2082 inet XXX.XXX.0.1/8 scope host lo
  2083. 2083 valid_lft forever preferred_lft forever
  2084. 2084 inet6 ::1/128 scope host noprefixroute
  2085. 2085 valid_lft forever preferred_lft forever
  2086. 2086 2: end0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
  2087. 2087 link/ether ba:00:3a:87:05:11 brd ff:ff:ff:ff:ff:ff
  2088. 2088
  2089. 2089 ### partitions:
  2090. 2090
  2091. 2091 major minor #blocks name
  2092. 2092
  2093. 2093 179 0 31166976 mmcblk1
  2094. 2094 179 1 30834688 mmcblk1p1
  2095. 2095 31 0 16384 mtdblock0
  2096. 2096 251 0 980720 zram0
  2097. 2097 251 1 51200 zram1
  2098. 2098
  2099. 2099 ### df:
  2100. 2100
  2101. 2101 udev 882M 0 882M 0% /dev
  2102. 2102 tmpfs 192M 2.9M 189M 2% /run
  2103. 2103 /dev/mmcblk1p1 29G 1.7G 27G 6% /
  2104. 2104 tmpfs 958M 0 958M 0% /dev/shm
  2105. 2105 tmpfs 5.0M 0 5.0M 0% /run/lock
  2106. 2106 tmpfs 958M 0 958M 0% /tmp
  2107. 2107 /dev/zram1 47M 944K 43M 3% /var/log
  2108. 2108
  2109. 2109 ### lsblk:
  2110. 2110
  2111. 2111 NAME FSTYPE SIZE MOUNTPOINT UUID
  2112. 2112 mtdblock0 16M
  2113. 2113 mmcblk1 29.7G
  2114. 2114 └─mmcblk1p1 ext4 29.4G / 50b1c2a8-fc2a-47b5-a6f0-3ea23edcd51d
  2115. 2115 zram1 50M /var/log
  2116. 2116 zram2 0B
  2117. 2117
  2118. 2118 ### zramctl:
  2119. 2119
  2120. 2120 NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT
  2121. 2121 /dev/zram1 zstd 50M 988K 212.5K 1.3M 4 /var/log
  2122. 2122 /dev/zram0 lzo-rle 957.7M 4K 74B 12K 4 [SWAP]
  2123. 2123
  2124. 2124 ### mtab:
  2125. 2125
  2126. 2126 /dev/mmcblk1p1 / ext4 rw,noatime,errors=remount-ro,commit=600 0 0
  2127. 2127 /dev/mmcblk1p1 /var/log.hdd ext4 rw,noatime,errors=remount-ro,commit=600 0 0
  2128. 2128 /dev/zram1 /var/log ext4 rw,relatime,discard 0 0
  2129. 2129
  2130. 2130 ### mmc1:aaaa info:
  2131. 2131
  2132. 2132 fwrev: 0x0
  2133. 2133 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=SE32G MODALIAS=mmc:block
  2134. 2134 cid: 035344534533324780a6b2553a0178f9
  2135. 2135 rca: 0xaaaa
  2136. 2136 csd: 400e00325b590000edc87f800a4040c3
  2137. 2137 manfid: 0x000003
  2138. 2138 ocr: 0x00300000
  2139. 2139 preferred_erase_size: 4194304
  2140. 2140 type: SD
  2141. 2141 hwrev: 0x8
  2142. 2142 date: 08/2023
  2143. 2143 dsr: 0x404
  2144. 2144 erase_size: 512
  2145. 2145 oemid: 0x5344
  2146. 2146 serial: 0xa6b2553a
  2147. 2147 ssr: 0000000005000000040090000f053a1e000800000001000000000000000000000000000000000000000000000000000000000000000000000000000000000000
  2148. 2148 scr: 0235844300000000
  2149. 2149 name: SE32G
  2150. 2150
  2151. 2151 ### Boot system health:
  2152. 2152
  2153. 2153 Time CPU load %cpu %sys %usr %nice %io %irq Tcpu C.St.
  2154. 2154 00:59:20 1800 MHz 0.62 21% 13% 7% 0% 1% 0% 48.9 °C 0/6
  2155. 2155 00:59:20 1800 MHz 0.62 29% 2% 25% 0% 0% 0% 47.8 °C 0/6
  2156. 2156 00:59:21 1800 MHz 0.62 30% 4% 25% 0% 0% 0% 47.2 °C 0/6
  2157. 2157 00:59:21 1800 MHz 0.65 31% 5% 26% 0% 0% 0% 47.2 °C 0/6
  2158. 2158 00:59:21 1800 MHz 0.65 30% 4% 26% 0% 0% 0% 46.7 °C 0/6
  2159. 2159
  2160. 2160 ### lsusb:
  2161. 2161
  2162. 2162 Bus 006 Device 002: ID c0f4:05e0 SZH usb keyboard
  2163. 2163 Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  2164. 2164 Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  2165. 2165 Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  2166. 2166 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  2167. 2167 Bus 007 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
  2168. 2168 Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  2169. 2169 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  2170. 2170
  2171. 2171 /: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
  2172. 2172 /: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M
  2173. 2173 |__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
  2174. 2174 |__ Port 1: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
  2175. 2175 /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
  2176. 2176 /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ehci-platform/1p, 480M
  2177. 2177 /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M
  2178. 2178 /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-platform/1p, 480M
  2179. 2179 /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
  2180. 2180
  2181. 2181 ### lspci:
  2182. 2182
  2183. 2183 00:00.0 PCI bridge: Rockchip Electronics Co., Ltd RK3568 Remote Signal Processor (rev 01)
  2184. 2184
  2185. 2185 ### Userland:
  2186. 2186
  2187. 2187 PRETTY_NAME="Armbian 23.8.2 bookworm"
  2188. 2188 ARMBIAN_PRETTY_NAME="Armbian 23.8.2 bookworm"
  2189. 2189
  2190. 2190 ### Installed packages:
  2191. 2191
  2192. 2192 ii armbian-bsp-cli-orangepi3b-edge 23.8.2 arm64 Armbian CLI BSP for board 'orangepi3b' branch 'edge'
  2193. 2193 ii armbian-config 23.8.2 all Armbian configuration utility
  2194. 2194 ii armbian-firmware 23.8.2 all Armbian - Linux firmware
  2195. 2195 ii armbian-plymouth-theme 23.8.2 all boot animation, logger and I/O multiplexer - Armbian theme
  2196. 2196 ii armbian-zsh 23.8.2 all Armbian improved ZShell (oh-my-zsh...)
  2197. 2197 ii linux-base 4.9 all Linux image base package
  2198. 2198 ii linux-dtb-edge-rockchip64 23.8.2 arm64 Armbian Linux edge DTBs in /boot/dtb-6.5.2-edge-rockchip64
  2199. 2199 ii linux-image-edge-rockchip64 23.8.2 arm64 Armbian Linux edge kernel image 6.5.2-edge-rockchip64
  2200. 2200 ii linux-libc-dev:arm64 6.1.38-4 arm64 Linux support headers for userspace development
  2201. 2201 ii linux-u-boot-orangepi3b-edge 23.8.2 arm64 Das U-Boot for orangepi3b
  2202. 2202
  2203. 2203 ### Loaded modules:
  2204. 2204
  2205. 2205 Module Size Used by
  2206. 2206 sunrpc 630784 1
  2207. 2207 lz4hc 12288 0
  2208. 2208 lz4 12288 0
  2209. 2209 pwm_fan 16384 0
  2210. 2210 snd_soc_simple_card 20480 0
  2211. 2211 snd_soc_simple_card_utils 32768 1 snd_soc_simple_card
  2212. 2212 snd_soc_rockchip_i2s_tdm 32768 4
  2213. 2213 snd_soc_rk817 40960 1
  2214. 2214 hantro_vpu 262144 0
  2215. 2215 snd_soc_hdmi_codec 24576 1
  2216. 2216 v4l2_vp9 24576 1 hantro_vpu
  2217. 2217 rockchip_rga 20480 0
  2218. 2218 v4l2_h264 16384 1 hantro_vpu
  2219. 2219 videobuf2_dma_contig 24576 1 hantro_vpu
  2220. 2220 videobuf2_dma_sg 16384 1 rockchip_rga
  2221. 2221 v4l2_mem2mem 40960 2 hantro_vpu,rockchip_rga
  2222. 2222 videobuf2_memops 16384 2 videobuf2_dma_contig,videobuf2_dma_sg
  2223. 2223 videobuf2_v4l2 32768 3 hantro_vpu,rockchip_rga,v4l2_mem2mem
  2224. 2224 videodev 294912 4 videobuf2_v4l2,hantro_vpu,rockchip_rga,v4l2_mem2mem
  2225. 2225 snd_soc_core 290816 5 snd_soc_rockchip_i2s_tdm,snd_soc_hdmi_codec,snd_soc_rk817,snd_soc_simple_card_utils,snd_soc_simple_card
  2226. 2226 videobuf2_common 65536 7 videobuf2_dma_contig,videobuf2_v4l2,hantro_vpu,rockchip_rga,videobuf2_dma_sg,v4l2_mem2mem,videobuf2_memops
  2227. 2227 snd_compress 24576 1 snd_soc_core
  2228. 2228 mc 73728 5 videodev,videobuf2_v4l2,hantro_vpu,videobuf2_common,v4l2_mem2mem
  2229. 2229 snd_pcm_dmaengine 16384 1 snd_soc_core
  2230. 2230 panfrost 73728 0
  2231. 2231 snd_pcm 139264 5 snd_soc_hdmi_codec,snd_compress,snd_soc_simple_card_utils,snd_soc_core,snd_pcm_dmaengine
  2232. 2232 snd_timer 40960 1 snd_pcm
  2233. 2233 gpu_sched 49152 1 panfrost
  2234. 2234 snd 102400 5 snd_soc_hdmi_codec,snd_timer,snd_compress,snd_soc_core,snd_pcm
  2235. 2235 drm_shmem_helper 24576 1 panfrost
  2236. 2236 soundcore 12288 1 snd
  2237. 2237 cpufreq_dt 16384 0
  2238. 2238 joydev 24576 0
  2239. 2239 binfmt_misc 24576 1
  2240. 2240 zram 28672 3
  2241. 2241 sprdwl_ng 352256 0
  2242. 2242 cfg80211 983040 1 sprdwl_ng
  2243. 2243 sprdbt_tty 36864 0
  2244. 2244 rfkill 28672 3 sprdbt_tty,cfg80211
  2245. 2245 dm_mod 147456 0
  2246. 2246 ip_tables 32768 0
  2247. 2247 x_tables 57344 1 ip_tables
  2248. 2248 autofs4 45056 2
  2249. 2249 motorcomm 24576 1
  2250. 2250 display_connector 16384 0
  2251. 2251 spi_rockchip_sfc 16384 0
  2252. 2252 dwmac_rk 28672 0
  2253. 2253 stmmac_platform 24576 1 dwmac_rk
  2254. 2254 stmmac 233472 3 stmmac_platform,dwmac_rk
  2255. 2255 pcs_xpcs 20480 1 stmmac
  2256. 2256 dw_hdmi_i2s_audio 12288 0
  2257. 2257 dw_hdmi_cec 12288 0
  2258. 2258
  2259. 2259 ### Current system health:
  2260. 2260
  2261. 2261 Time CPU load %cpu %sys %usr %nice %io %irq Tcpu C.St.
  2262. 2262 00:59:53 1800 MHz 0.50 16% 8% 7% 0% 0% 0% 44.4 °C 0/6
  2263. 2263 00:59:54 1800 MHz 0.50 3% 3% 0% 0% 0% 0% 43.8 °C 0/6
  2264. 2264 00:59:54 1800 MHz 0.50 4% 2% 0% 1% 0% 0% 43.1 °C 0/6
  2265. 2265 00:59:54 1800 MHz 0.50 3% 3% 0% 0% 0% 0% 43.1 °C 0/6
  2266. 2266 00:59:55 1800 MHz 0.50 2% 2% 0% 0% 0% 0% 43.1 °C 0/6
  2267. 2267 00:59:57 1800 MHz 0.50 17% 7% 9% 0% 0% 0% 51.2 °C 0/6
  2268. 2268 00:59:58 1800 MHz 0.94 77% 0% 77% 0% 0% 0% 47.8 °C 0/6
  2269. 2269 00:59:59 1800 MHz 0.94 2% 2% 0% 0% 0% 0% 46.7 °C 0/6
  2270. 2270 00:59:59 1800 MHz 0.94 4% 2% 0% 1% 0% 0% 46.7 °C 0/6
  2271. 2271 00:59:59 1800 MHz 0.94 3% 2% 0% 0% 0% 0% 46.1 °C 0/6
  2272. 2272
  2273. 2273 ### resolv.conf
  2274. 2274
  2275. 2275 -rw-r--r-- 1 root root 30 Oct 23 00:58 /etc/resolv.conf
  2276. 2276 # Generated by NetworkManager
  2277. 2277
  2278. 2278 ### Current sysinfo:
  2279. 2279
  2280. 2280 Linux 6.5.2-edge-rockchip64 (orangepi3b) 10/23/2023 _aarch64_ (4 CPU)
  2281. 2281
  2282. 2282 avg-cpu: %user %nice %system %iowait %steal %idle
  2283. 2283 10.24 0.04 7.71 0.76 0.00 81.26
  2284. 2284
  2285. 2285 Device tps kB_read/s kB_wrtn/s kB_dscd/s kB_read kB_wrtn kB_dscd
  2286. 2286 mmcblk1 39.02 1801.13 26.19 0.00 151079 2197 0
  2287. 2287 mmcblk1p1 37.72 1775.05 26.19 0.00 148891 2197 0
  2288. 2288 mtdblock0 0.42 4.01 0.00 0.00 336 0 0
  2289. 2289 zram0 0.58 14.35 0.05 0.00 1204 4 0
  2290. 2290 zram1 1.99 4.77 15.78 0.00 400 1324 0
  2291. 2291 zram2 0.00 0.00 0.00 0.00 0 0 0
  2292. 2292
  2293. 2293 --procs-- -----------------------memory---------------------- ---swap-- -----io---- -system-- ----------cpu----------
  2294. 2294 r b swpd free buff cache si so bi bo in cs us sy id wa st gu
  2295. 2295 1 0 0 1644092 11252 174256 0 0 459 11 190 188 10 8 81 1 0 0
  2296. 2296
  2297. 2297 total used free shared buff/cache available
  2298. 2298 Mem: 1.9Gi 210Mi 1.6Gi 7.9Mi 181Mi 1.7Gi
  2299. 2299 Swap: 957Mi 0B 957Mi
  2300. 2300
  2301. 2301 NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT
  2302. 2302 /dev/zram1 zstd 50M 1M 242.7K 1.3M 4 /var/log
  2303. 2303 /dev/zram0 lzo-rle 957.7M 4K 74B 12K 4 [SWAP]
  2304. 2304
  2305. 2305 01:00:00 up 1 min, 1 user, load average: 0.94, 0.28, 0.10
  2306. 2306
  2307. 2307 [ 6.709193] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
  2308. 2308 [ 6.728341] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
  2309. 2309 [ 6.731571] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
  2310. 2310 [ 6.735571] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
  2311. 2311 [ 6.739164] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
  2312. 2312 [ 6.744226] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock.
  2313. 2313 [ 6.750098] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
  2314. 2314 [ 6.755657] systemd[1]: modprobe@configfs.service: Deactivated successfully.
  2315. 2315 [ 6.757414] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
  2316. 2316 [ 6.761488] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
  2317. 2317 [ 6.763239] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
  2318. 2318 [ 6.768855] systemd[1]: modprobe@drm.service: Deactivated successfully.
  2319. 2319 [ 6.771116] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
  2320. 2320 [ 6.775438] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
  2321. 2321 [ 6.776469] EXT4-fs (mmcblk1p1): re-mounted 50b1c2a8-fc2a-47b5-a6f0-3ea23edcd51d r/w. Quota mode: none.
  2322. 2322 [ 6.778260] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
  2323. 2323 [ 6.789123] systemd[1]: modprobe@fuse.service: Deactivated successfully.
  2324. 2324 [ 6.791106] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
  2325. 2325 [ 6.796157] systemd[1]: modprobe@loop.service: Deactivated successfully.
  2326. 2326 [ 6.798126] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
  2327. 2327 [ 6.801951] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
  2328. 2328 [ 6.838864] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
  2329. 2329 [ 6.860385] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
  2330. 2330 [ 6.870672] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
  2331. 2331 [ 6.881322] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  2332. 2332 [ 6.882487] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed...
  2333. 2333 [ 6.883180] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  2334. 2334 [ 6.885140] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
  2335. 2335 [ 6.892534] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
  2336. 2336 [ 6.904166] systemd[1]: Starting systemd-sysusers.service - Create System Users...
  2337. 2337 [ 6.914986] WCN: start_marlin [MARLIN_WIFI]
  2338. 2338 [ 6.915016] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1
  2339. 2339 [ 6.915028] WCN: the first power on start
  2340. 2340 [ 6.920859] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
  2341. 2341 [ 6.941401] sdiohal:sdiohal_scan_card
  2342. 2342 [ 6.941733] sdiohal:sdiohal_probe: func->class=0, vendor=0x0000, device=0x0000, func_num=0x0001, clock=150000000
  2343. 2343 [ 6.941968] sdiohal err:dt readl fail ret:-110, system_addr=0x4082c208
  2344. 2344 [ 6.941983] sdiohal:sdio dump_aon_reg entry
  2345. 2345 [ 6.942016] sdiohal:pmu sdio status:[0x140]:0xe1
  2346. 2346 [ 6.942051] sdiohal:pmu sdio status:[0x141]:0x3c
  2347. 2347 [ 6.942084] sdiohal:pmu sdio status:[0x142]:0xf
  2348. 2348 [ 6.942116] sdiohal:pmu sdio status:[0x143]:0x0
  2349. 2349 [ 6.942148] sdiohal:pmu sdio status:[0x144]:0x0
  2350. 2350 [ 6.942179] sdiohal:pmu sdio status:[0x145]:0x0
  2351. 2351 [ 6.942210] sdiohal:pmu sdio status:[0x146]:0x0
  2352. 2352 [ 6.942242] sdiohal:pmu sdio status:[0x147]:0x0
  2353. 2353 [ 6.942274] sdiohal:pmu sdio status:[0x148]:0x66
  2354. 2354 [ 6.942305] sdiohal:pmu sdio status:[0x149]:0x0
  2355. 2355 [ 6.942337] sdiohal:pmu sdio status:[0x14a]:0x0
  2356. 2356 [ 6.942368] sdiohal:pmu sdio status:[0x14b]:0x0
  2357. 2357 [ 6.942487] sdiohal:pmu sdio status:[0x14c]:0x0
  2358. 2358 [ 6.942528] sdiohal:pmu sdio status:[0x14d]:0x0
  2359. 2359 [ 6.942564] sdiohal:pmu sdio status:[0x14e]:0x0
  2360. 2360 [ 6.942599] sdiohal:pmu sdio status:[0x14f]:0x0
  2361. 2361 [ 6.942718] sdiohal:cm4d haddr 0:[0x144]:0x0
  2362. 2362 [ 6.942756] sdiohal:cm4d haddr 0:[0x145]:0x0
  2363. 2363 [ 6.942791] sdiohal:cm4d haddr 0:[0x146]:0x0
  2364. 2364 [ 6.942828] sdiohal:cm4d haddr 0:[0x147]:0x0
  2365. 2365 [ 6.942949] sdiohal:cm4i haddr 1:[0x144]:0x0
  2366. 2366 [ 6.942988] sdiohal:cm4i haddr 1:[0x145]:0x0
  2367. 2367 [ 6.943025] sdiohal:cm4i haddr 1:[0x146]:0x0
  2368. 2368 [ 6.943061] sdiohal:cm4i haddr 1:[0x147]:0x0
  2369. 2369 [ 6.943175] sdiohal:cm4s haddr 2:[0x144]:0x0
  2370. 2370 [ 6.943209] sdiohal:cm4s haddr 2:[0x145]:0x0
  2371. 2371 [ 6.943243] sdiohal:cm4s haddr 2:[0x146]:0x0
  2372. 2372 [ 6.943276] sdiohal:cm4s haddr 2:[0x147]:0x0
  2373. 2373 [ 6.943390] sdiohal:dmaw haddr 3:[0x144]:0x0
  2374. 2374 [ 6.943425] sdiohal:dmaw haddr 3:[0x145]:0x0
  2375. 2375 [ 6.943458] sdiohal:dmaw haddr 3:[0x146]:0x0
  2376. 2376 [ 6.943492] sdiohal:dmaw haddr 3:[0x147]:0x0
  2377. 2377 [ 6.943605] sdiohal:dmar haddr 4:[0x144]:0x0
  2378. 2378 [ 6.943640] sdiohal:dmar haddr 4:[0x145]:0x0
  2379. 2379 [ 6.943675] sdiohal:dmar haddr 4:[0x146]:0x0
  2380. 2380 [ 6.943709] sdiohal:dmar haddr 4:[0x147]:0x0
  2381. 2381 [ 6.943823] sdiohal:aon_to_ahb haddr 5:[0x144]:0x0
  2382. 2382 [ 6.943857] sdiohal:aon_to_ahb haddr 5:[0x145]:0x0
  2383. 2383 [ 6.943892] sdiohal:aon_to_ahb haddr 5:[0x146]:0x0
  2384. 2384 [ 6.943926] sdiohal:aon_to_ahb haddr 5:[0x147]:0x0
  2385. 2385 [ 6.944042] sdiohal:axi_to_ahb haddr 6:[0x144]:0x0
  2386. 2386 [ 6.944076] sdiohal:axi_to_ahb haddr 6:[0x145]:0x0
  2387. 2387 [ 6.944110] sdiohal:axi_to_ahb haddr 6:[0x146]:0x0
  2388. 2388 [ 6.944143] sdiohal:axi_to_ahb haddr 6:[0x147]:0x0
  2389. 2389 [ 6.944257] sdiohal:hready_status haddr 7:[0x144]:0xff
  2390. 2390 [ 6.944291] sdiohal:hready_status haddr 7:[0x145]:0xff
  2391. 2391 [ 6.944325] sdiohal:hready_status haddr 7:[0x146]:0xfb
  2392. 2392 [ 6.944360] sdiohal:hready_status haddr 7:[0x147]:0x10
  2393. 2393 [ 6.944370] sdiohal:val:0x3c
  2394. 2394 [ 6.944377] sdiohal:sdio dump_aon_reg end
  2395. 2395
  2396. 2396 [ 6.944382] sdiohal:sdiohal_abort
  2397. 2397 [ 6.944407] sdiohal:before abort, SDIO_VER_CCCR:0x43
  2398. 2398 [ 6.944444] sdiohal:after abort, SDIO_VER_CCCR:0x43
  2399. 2399 [ 6.944457] WCN_ERR: read marlin3E chip id fail, ret=-110
  2400. 2400 [ 6.944506] WCN: marlin_scan_finish!
  2401. 2401 [ 6.944515] sdiohal:probe ok
  2402. 2402 [ 6.944740] sdiohal:scan end!
  2403. 2403 [ 6.944756] WCN: then marlin start to download
  2404. 2404 [ 6.944802] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start!
  2405. 2405 [ 6.949062] kworker/0:3: vmalloc error: size 18446744073709551615, exceeds total pages, mode:0xcc0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0
  2406. 2406 [ 6.949147] CPU: 0 PID: 73 Comm: kworker/0:3 Not tainted 6.5.2-edge-rockchip64 #1
  2407. 2407 [ 6.949162] Hardware name: Rockchip RK3566 OPi 3B (DT)
  2408. 2408 [ 6.949173] Workqueue: events pre_btwifi_download_sdio
  2409. 2409 [ 6.949205] Call trace:
  2410. 2410 [ 6.949212] dump_backtrace+0x94/0x114
  2411. 2411 [ 6.949230] show_stack+0x18/0x24
  2412. 2412 [ 6.949241] dump_stack_lvl+0x48/0x60
  2413. 2413 [ 6.949260] dump_stack+0x18/0x24
  2414. 2414 [ 6.949273] warn_alloc+0x118/0x1b0
  2415. 2415 [ 6.949290] __vmalloc_node_range+0x724/0x770
  2416. 2416 [ 6.949302] vmalloc+0x5c/0x6c
  2417. 2417 [ 6.949312] load_firmware_data_path+0x64/0x220
  2418. 2418 [ 6.949327] pre_btwifi_download_sdio+0xe8/0x182c
  2419. 2419 [ 6.949341] process_one_work+0x214/0x4a0
  2420. 2420 [ 6.949355] worker_thread+0x6c/0x430
  2421. 2421 [ 6.949366] kthread+0x104/0x108
  2422. 2422 [ 6.949377] ret_from_fork+0x10/0x20
  2423. 2423 [ 6.949422] Mem-Info:
  2424. 2424 [ 6.949438] active_anon:1452 inactive_anon:51 isolated_anon:0
  2425. 2425 active_file:5223 inactive_file:2845 isolated_file:0
  2426. 2426 unevictable:2027 dirty:0 writeback:0
  2427. 2427 slab_reclaimable:4862 slab_unreclaimable:5639
  2428. 2428 mapped:3075 shmem:1324 pagetables:99
  2429. 2429 sec_pagetables:0 bounce:0
  2430. 2430 kernel_misc_reclaimable:0
  2431. 2431 free:458521 free_pcp:2123 free_cma:30716
  2432. 2432 [ 6.949466] Node 0 active_anon:5808kB inactive_anon:204kB active_file:20892kB inactive_file:11380kB unevictable:8108kB isolated(anon):0kB isolated(file):0kB mapped:12300kB dirty:0kB writeback:0kB shmem:5296kB shmem_thp: 0kB shmem_pmdmapped: 0kB anon_thp: 0kB writeback_tmp:0kB kernel_stack:1952kB pagetables:396kB sec_pagetables:0kB all_unreclaimable? no
  2433. 2433 [ 6.949490] Node 0 DMA free:1834084kB boost:0kB min:22528kB low:28160kB high:33792kB reserved_highatomic:0KB active_anon:5808kB inactive_anon:204kB active_file:20892kB inactive_file:11380kB unevictable:8108kB writepending:0kB present:2095104kB managed:1961440kB mlocked:0kB bounce:0kB free_pcp:8556kB local_pcp:1772kB free_cma:122864kB
  2434. 2434 [ 6.949520] lowmem_reserve[]: 0 0 0 0
  2435. 2435 [ 6.949543] Node 0 DMA: 1*4kB (U) 2*8kB (UE) 3*16kB (UMC) 3*32kB (UEC) 3*64kB (UEC) 4*128kB (UEC) 21*256kB (UC) 22*512kB (UC) 14*1024kB (UEC) 8*2048kB (UMEC) 436*4096kB (UMC) = 1834084kB
  2436. 2436 [ 6.949664] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=1048576kB
  2437. 2437 [ 6.949676] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=32768kB
  2438. 2438 [ 6.949685] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB
  2439. 2439 [ 6.949695] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=64kB
  2440. 2440 [ 6.949703] 10145 total pagecache pages
  2441. 2441 [ 6.949710] 0 pages in swap cache
  2442. 2442 [ 6.949716] Free swap = 0kB
  2443. 2443 [ 6.949721] Total swap = 0kB
  2444. 2444 [ 6.949728] 523776 pages RAM
  2445. 2445 [ 6.949733] 0 pages HighMem/MovableOnly
  2446. 2446 [ 6.949739] 33416 pages reserved
  2447. 2447 [ 6.949744] 32768 pages cma reserved
  2448. 2448 [ 6.949759] WCN_ERR: no memory for image
  2449. 2449 [ 6.949768] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start!
  2450. 2450 [ 6.949820] WCN_ERR: no memory for image
  2451. 2451 [ 6.949830] WCN: marlin_request_firmware from (null)wcnmodem.bin start!
  2452. 2452 [ 6.966469] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
  2453. 2453 [ 7.024573] systemd[1]: Finished systemd-sysusers.service - Create System Users.
  2454. 2454 [ 7.066366] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
  2455. 2455 [ 7.102880] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout.
  2456. 2456 [ 7.184972] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev.
  2457. 2457 [ 7.197310] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems.
  2458. 2458 [ 7.230021] systemd[1]: Mounting tmp.mount - /tmp...
  2459. 2459 [ 7.249645] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files...
  2460. 2460 [ 7.266904] systemd[1]: Mounted tmp.mount - /tmp.
  2461. 2461 [ 7.279291] systemd[1]: Reached target local-fs.target - Local File Systems.
  2462. 2462 [ 7.318441] systemd[1]: Starting armbian-zram-config.service - Armbian ZRAM config...
  2463. 2463 [ 7.346023] systemd[1]: Starting console-setup.service - Set console font and keymap...
  2464. 2464 [ 7.366720] systemd[1]: Starting plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data...
  2465. 2465 [ 7.404359] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats...
  2466. 2466 [ 7.410388] systemd[1]: Finished console-setup.service - Set console font and keymap.
  2467. 2467 [ 7.443839] systemd[1]: Received SIGRTMIN+20 from PID 161 (plymouthd).
  2468. 2468 [ 7.460803] systemd[1]: Finished plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data.
  2469. 2469 [ 7.469011] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 271 (systemd-binfmt)
  2470. 2470 [ 7.679150] zram: Added device: zram0
  2471. 2471 [ 7.680377] zram: Added device: zram1
  2472. 2472 [ 7.682307] zram: Added device: zram2
  2473. 2473 [ 7.700412] systemd[1]: Started systemd-udevd.service - Rule-based Manager for Device Events and Files.
  2474. 2474 [ 7.758095] systemd[1]: Mounting proc-sys-fs-binfmt_misc.mount - Arbitrary Executable File Formats File System...
  2475. 2475 [ 7.808897] systemd[1]: Listening on systemd-rfkill.socket - Load/Save RF Kill Switch Status /dev/rfkill Watch.
  2476. 2476 [ 7.840646] systemd[1]: Mounted proc-sys-fs-binfmt_misc.mount - Arbitrary Executable File Formats File System.
  2477. 2477 [ 7.864404] systemd[1]: Finished systemd-binfmt.service - Set Up Additional Binary Formats.
  2478. 2478 [ 7.909508] zram0: detected capacity change from 0 to 1961440
  2479. 2479 [ 7.969314] WCN_ERR: load_firmware_data_path: open file (null)wcnmodem.bin error
  2480. 2480 [ 7.969347] WCN: marlin_request_firmware from (null)wcnmodem.bin start!
  2481. 2481 [ 8.145394] systemd[1]: Finished systemd-udev-trigger.service - Coldplug All udev Devices.
  2482. 2482 [ 8.190554] systemd[1]: Starting ifupdown-pre.service - Helper to synchronize boot up for ifupdown...
  2483. 2483 [ 8.214804] systemd[1]: Starting plymouth-start.service - Show Plymouth Boot Screen...
  2484. 2484 [ 8.230676] systemd[1]: Finished ifupdown-pre.service - Helper to synchronize boot up for ifupdown.
  2485. 2485 [ 8.293416] systemd[1]: Found device dev-ttyS2.device - /dev/ttyS2.
  2486. 2486 [ 8.313404] systemd[1]: Started plymouth-start.service - Show Plymouth Boot Screen.
  2487. 2487 [ 8.412862] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid).
  2488. 2488 [ 8.414290] systemd[1]: Started systemd-ask-password-plymouth.path - Forward Password Requests to Plymouth Directory Watch.
  2489. 2489 [ 8.424997] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
  2490. 2490 [ 8.431592] systemd[1]: Reached target paths.target - Path Units.
  2491. 2491 [ 8.904327] panfrost fde60000.gpu: clock rate = 594000000
  2492. 2492 [ 8.904370] panfrost fde60000.gpu: bus_clock rate = 500000000
  2493. 2493 [ 8.907799] mc: Linux media interface: v0.10
  2494. 2494 [ 8.921585] panfrost fde60000.gpu: mali-g52 id 0x7402 major 0x1 minor 0x0 status 0x0
  2495. 2495 [ 8.921607] panfrost fde60000.gpu: features: 00000000,00000cf7, issues: 00000000,00000400
  2496. 2496 [ 8.921615] panfrost fde60000.gpu: Features: L2:0x07110206 Shader:0x00000002 Tiler:0x00000209 Mem:0x1 MMU:0x00002823 AS:0xff JS:0x7
  2497. 2497 [ 8.921622] panfrost fde60000.gpu: shader_present=0x1 l2_present=0x1
  2498. 2498 [ 8.923870] [drm] Initialized panfrost 1.2.0 20180908 for fde60000.gpu on minor 1
  2499. 2499 [ 8.942256] videodev: Linux video capture interface: v2.00
  2500. 2500 [ 8.959568] rockchip-rga fdeb0000.rga: HW Version: 0x03.02
  2501. 2501 [ 8.960314] rockchip-rga fdeb0000.rga: Registered rockchip-rga as /dev/video0
  2502. 2502 [ 8.976167] hantro-vpu fdea0000.video-codec: Adding to iommu group 0
  2503. 2503 [ 8.985786] hantro-vpu fdea0000.video-codec: registered rockchip,rk3568-vpu-dec as /dev/video1
  2504. 2504 [ 8.991469] hantro-vpu fdee0000.video-codec: Adding to iommu group 1
  2505. 2505 [ 8.997302] WCN_ERR: load_firmware_data_path: open file (null)wcnmodem.bin error
  2506. 2506 [ 8.997323] WCN_ERR: btwifi_download_firmware request firmware error
  2507. 2507 [ 8.999086] hantro-vpu fdee0000.video-codec: registered rockchip,rk3568-vepu-enc as /dev/video2
  2508. 2508 [ 9.559498] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid).
  2509. 2509 [ 9.600502] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
  2510. 2510 [ 9.607411] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
  2511. 2511 [ 9.615944] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
  2512. 2512 [ 9.625829] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
  2513. 2513 [ 9.627175] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
  2514. 2514 [ 9.637880] systemd[1]: modprobe@loop.service: Deactivated successfully.
  2515. 2515 [ 9.638938] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
  2516. 2516 [ 9.642769] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
  2517. 2517 [ 9.643863] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
  2518. 2518 [ 9.645743] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
  2519. 2519 [ 9.646037] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
  2520. 2520 [ 10.181230] random: crng init done
  2521. 2521 [ 10.194796] systemd[1]: Finished systemd-random-seed.service - Load/Save Random Seed.
  2522. 2522 [ 10.197507] systemd[1]: first-boot-complete.target - First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes).
  2523. 2523 [ 10.197978] systemd[1]: systemd-machine-id-commit.service - Commit a transient machine-id on disk was skipped because of an unmet condition check (ConditionPathIsMountPoint=/etc/machine-id).
  2524. 2524 [ 10.330811] Adding 980716k swap on /dev/zram0. Priority:5 extents:1 across:980716k SSFS
  2525. 2525 [ 10.551430] zram1: detected capacity change from 0 to 102400
  2526. 2526 [ 10.608379] systemd[1]: Finished armbian-zram-config.service - Armbian ZRAM config.
  2527. 2527 [ 10.652234] systemd[1]: Starting armbian-ramlog.service - Armbian memory supported logging...
  2528. 2528 [ 10.733317] EXT4-fs (zram1): mounted filesystem eeecba9c-53ce-4e2b-ac0f-250eafdcbf93 r/w without journal. Quota mode: none.
  2529. 2529 [ 12.855734] systemd[1]: Finished armbian-ramlog.service - Armbian memory supported logging.
  2530. 2530 [ 12.896274] systemd[1]: Starting systemd-journald.service - Journal Service...
  2531. 2531 [ 13.128672] systemd[1]: Started systemd-journald.service - Journal Service.
  2532. 2532 [ 13.210097] systemd-journald[477]: Received client request to flush runtime journal.
  2533. 2533 [ 13.522688] RPC: Registered named UNIX socket transport module.
  2534. 2534 [ 13.522714] RPC: Registered udp transport module.
  2535. 2535 [ 13.522722] RPC: Registered tcp transport module.
  2536. 2536 [ 13.522729] RPC: Registered tcp-with-tls transport module.
  2537. 2537 [ 13.522734] RPC: Registered tcp NFSv4.1 backchannel transport module.
  2538. 2538 [ 37.857365] WCN_ERR: marlin download timeout
  2539. 2539 [ 37.857401] sdiohal:sdiohal_runtime_put entry
  2540. 2540 [ 37.857611] sdiohal:sdiohal_runtime_put wait xmit_cnt end
  2541. 2541 [ 37.881853] sprdwl:__sprdwl_cmd_getbuf cant't get vif, ctx_id: 0
  2542. 2542 [ 37.882008] sdiohal err:sdiohal_sdio_pt_write xmit_cnt:0 xmit_start:0,not have card
  2543. 2543 [ 37.882019] sdiohal err:tyr send,type:-2115847672 subtype:-32768 node_num:1
  2544. 2544 [ 40.929304] sprdwl:[WIFI_CMD_SYNC_VERSION]timeout
  2545. 2545 [ 40.929333] sprdwl:ctx_id:0 cmd: WIFI_CMD_SYNC_VERSION[9] rsp timeout (mstime = 37876), num=1
  2546. 2546 [ 40.929365] sprdwl:SYNC CMD ERROR!!
  2547. 2547 [ 40.957492] unisoc_wifi: probe of unisoc_wifi failed with error -1
  2548. 2548 [ 41.535974] systemd-journald[477]: Received client request to relinquish /var/log/journal/7f2e8203f1b642aead619631e49162a7 access.
  2549. 2549 [ 43.563907] rk_gmac-dwmac fe010000.ethernet end0: Register MEM_TYPE_PAGE_POOL RxQ-0
  2550. 2550 [ 43.567776] rk_gmac-dwmac fe010000.ethernet end0: PHY [stmmac-0:00] driver [YT8531 Gigabit Ethernet] (irq=POLL)
  2551. 2551 [ 43.577297] dwmac4: Master AXI performs any burst length
  2552. 2552 [ 43.577339] rk_gmac-dwmac fe010000.ethernet end0: No Safety Features support found
  2553. 2553 [ 43.577370] rk_gmac-dwmac fe010000.ethernet end0: IEEE 1588-2008 Advanced Timestamp supported
  2554. 2554 [ 43.577758] rk_gmac-dwmac fe010000.ethernet end0: registered PTP clock
  2555. 2555 [ 43.579393] rk_gmac-dwmac fe010000.ethernet end0: configuring for phy/rgmii link mode
  2556. 2556 [ 52.699521] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=1307 'systemd'
  2557. 2557
  2558. 2558
  2559. 2559 vm.admin_reserve_kbytes = 8192
  2560. 2560 vm.compaction_proactiveness = 20
  2561. 2561 vm.compact_unevictable_allowed = 1
  2562. 2562 vm.dirty_background_bytes = 0
  2563. 2563 vm.dirty_background_ratio = 10
  2564. 2564 vm.dirty_bytes = 0
  2565. 2565 vm.dirty_expire_centisecs = 3000
  2566. 2566 vm.dirty_ratio = 20
  2567. 2567 vm.dirtytime_expire_seconds = 43200
  2568. 2568 vm.dirty_writeback_centisecs = 500
  2569. 2569 vm.extfrag_threshold = 500
  2570. 2570 vm.hugetlb_shm_group = 0
  2571. 2571 vm.laptop_mode = 0
  2572. 2572 vm.legacy_va_layout = 0
  2573. 2573 vm.lowmem_reserve_ratio = 256 256 32 0
  2574. 2574 vm.max_map_count = 65530
  2575. 2575 vm.memfd_noexec = 0
  2576. 2576 vm.min_free_kbytes = 22528
  2577. 2577 vm.min_slab_ratio = 5
  2578. 2578 vm.min_unmapped_ratio = 1
  2579. 2579 vm.mmap_min_addr = 4096
  2580. 2580 vm.mmap_rnd_bits = 18
  2581. 2581 vm.mmap_rnd_compat_bits = 11
  2582. 2582 vm.nr_hugepages = 0
  2583. 2583 vm.nr_hugepages_mempolicy = 0
  2584. 2584 vm.nr_overcommit_hugepages = 0
  2585. 2585 vm.numa_stat = 1
  2586. 2586 vm.numa_zonelist_order = Node
  2587. 2587 vm.oom_dump_tasks = 1
  2588. 2588 vm.oom_kill_allocating_task = 0
  2589. 2589 vm.overcommit_kbytes = 0
  2590. 2590 vm.overcommit_memory = 0
  2591. 2591 vm.overcommit_ratio = 50
  2592. 2592 vm.page-cluster = 0
  2593. 2593 vm.page_lock_unfairness = 5
  2594. 2594 vm.panic_on_oom = 0
  2595. 2595 vm.percpu_pagelist_high_fraction = 0
  2596. 2596 vm.stat_interval = 1
  2597. 2597 vm.swappiness = 100
  2598. 2598 vm.user_reserve_kbytes = 60053
  2599. 2599 vm.vfs_cache_pressure = 100
  2600. 2600 vm.watermark_boost_factor = 15000
  2601. 2601 vm.watermark_scale_factor = 10
  2602. 2602 vm.zone_reclaim_mode = 0
  2603. 2603
  2604. 2604 ### interrupts:
  2605. 2605 CPU0 CPU1 CPU2 CPU3
  2606. 2606 9: 0 0 0 0 GICv3 25 Level vgic
  2607. 2607 11: 0 0 0 0 GICv3 30 Level kvm guest ptimer
  2608. 2608 12: 0 0 0 0 GICv3 27 Level kvm guest vtimer
  2609. 2609 13: 6167 7265 5972 5258 GICv3 26 Level arch_timer
  2610. 2610 19: 0 0 0 0 GICv3 167 Level rockchip_usb2phy
  2611. 2611 20: 1 0 0 0 GICv3 168 Level rockchip_usb2phy
  2612. 2612 22: 0 0 0 0 INTx 0 Edge PCIe PME, aerdrv
  2613. 2613 23: 0 0 0 0 GICv3 46 Level fe530000.dma-controller
  2614. 2614 24: 0 0 0 0 GICv3 45 Level fe530000.dma-controller
  2615. 2615 25: 0 0 0 0 GICv3 48 Level fe550000.dma-controller
  2616. 2616 26: 0 0 0 0 GICv3 47 Level fe550000.dma-controller
  2617. 2617 28: 0 0 0 0 GICv3 170 Level fdea0800.iommu
  2618. 2618 29: 0 0 0 0 GICv3 95 Level fdee0800.iommu
  2619. 2619 30: 6148 0 0 0 GICv3 180 Level fe043e00.iommu, fe040000.vop
  2620. 2620 31: 0 0 0 0 GICv3 201 Level xhci-hcd:usb1
  2621. 2621 32: 0 0 0 0 GICv3 202 Level xhci-hcd:usb5
  2622. 2622 33: 0 0 0 0 GICv3 162 Level ehci_hcd:usb2
  2623. 2623 34: 2 0 0 0 GICv3 165 Level ehci_hcd:usb4
  2624. 2624 35: 0 0 0 0 GICv3 163 Level ohci_hcd:usb3
  2625. 2625 36: 123 0 0 0 GICv3 166 Level ohci_hcd:usb6
  2626. 2626 37: 3156 0 0 0 GICv3 78 Level fdd40000.i2c
  2627. 2627 38: 0 0 0 0 rockchip_gpio_irq 3 Level rk817
  2628. 2628 39: 0 0 0 0 rk817 0 Edge rk805_pwrkey_rise
  2629. 2629 40: 0 0 0 0 rk817 1 Edge rk805_pwrkey_fall
  2630. 2630 44: 0 0 0 0 rk817 5 Edge RTC alarm
  2631. 2631 63: 0 0 0 0 GICv3 147 Level rockchip_thermal
  2632. 2632 64: 0 0 0 0 GICv3 181 Edge fe600000.watchdog
  2633. 2633 65: 539 0 0 0 GICv3 131 Level dw-mci
  2634. 2634 66: 11518 0 0 0 GICv3 130 Level dw-mci
  2635. 2635 67: 98 0 0 0 GICv3 51 Level mmc0
  2636. 2636 68: 3 0 0 0 GICv3 125 Level fe720000.saradc
  2637. 2637 69: 0 0 0 0 GICv3 260 Level arm-pmu
  2638. 2638 70: 0 0 0 0 GICv3 261 Level arm-pmu
  2639. 2639 71: 0 0 0 0 GICv3 262 Level arm-pmu
  2640. 2640 72: 0 0 0 0 GICv3 263 Level arm-pmu
  2641. 2641 73: 259 0 0 0 GICv3 77 Level fe0a0000.hdmi, dw-hdmi-cec
  2642. 2642 74: 0 0 0 0 GICv3 64 Level end0
  2643. 2643 75: 0 0 0 0 GICv3 61 Level end0
  2644. 2644 76: 674 0 0 0 GICv3 133 Level fe300000.spi
  2645. 2645 77: 2 0 0 0 GICv3 71 Level panfrost-gpu
  2646. 2646 78: 0 0 0 0 GICv3 73 Level panfrost-mmu
  2647. 2647 79: 0 0 0 0 GICv3 72 Level panfrost-job
  2648. 2648 80: 0 0 0 0 GICv3 122 Level fdeb0000.rga
  2649. 2649 81: 0 0 0 0 GICv3 171 Level fdea0000.video-codec
  2650. 2650 82: 0 0 0 0 GICv3 96 Level fdee0000.video-codec
  2651. 2651 IPI0: 739 1472 1577 1188 Rescheduling interrupts
  2652. 2652 IPI1: 2189 3763 2533 2670 Function call interrupts
  2653. 2653 IPI2: 0 0 0 0 CPU stop interrupts
  2654. 2654 IPI3: 0 0 0 0 CPU stop (for crash dump) interrupts
  2655. 2655 IPI4: 0 0 0 0 Timer broadcast interrupts
  2656. 2656 IPI5: 383 466 359 126 IRQ work interrupts
  2657. 2657 IPI6: 0 0 0 0 CPU wake-up interrupts
  2658. 2658 Err: 0
  2659.  
  2660. Please upload the whole output above to an online pasteboard service
  2661. and provide the URL in the forum where you have been asked for this.
  2662.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!