API tools faq
paste
divx118

dmesg

divx118
Sep 5th, 2018
2,989
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 11.07 KB | None | 0 0
raw download clone embed print report
  1. Welcome to Monitor Tech.
  2. ~ # dmesg
  3. Booting Linux on physical CPU 0x0
  4. Linux version 4.9.37 (chenwenrong@xm-5) (gcc version 6.2.1 20161016 (Hisilicon_v510_20171111) ) #13 Thu Mar 8 15:40:12 CST 2018
  5. CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d
  6. CPU: div instructions available: patching division code
  7. CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  8. OF: fdt:Machine model: Hisilicon HI3536DV100 DEMO Board
  9. Memory policy: Data cache writeback
  10. Hit pending asynchronous external abort (FSR=0x00000c06) during first unmask, this is most likely caused by a firmware/bootloader bug.
  11. On node 0 totalpages: 21248
  12. free_area_init_node: node 0, pgdat c0709868, node_mem_map c524f000
  13. Normal zone: 166 pages used for memmap
  14. Normal zone: 0 pages reserved
  15. Normal zone: 21248 pages, LIFO batch:3
  16. CPU: All CPU(s) started in SVC mode.
  17. pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  18. pcpu-alloc: [0] 0
  19. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 21082
  20. Kernel command line: mem=83M console=ttyAMA0,115200n8 earlyprintk root=/dev/mtdblock1 rootfstype=squashfs mtdparts=hi_sfc:320K(boot),3968K(romfs),7040K(usr),1600K(web),2816K(custom),128K(logo),512K(mtd) coherent_pool=2M
  21. PID hash table entries: 512 (order: -1, 2048 bytes)
  22. Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  23. Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  24. Memory: 76636K/84992K available (5552K kernel code, 167K rwdata, 1260K rodata, 188K init, 272K bss, 8356K reserved, 0K cma-reserved)
  25. Virtual kernel memory layout:
  26. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  27. fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  28. vmalloc : 0xc5800000 - 0xff800000 ( 928 MB)
  29. lowmem : 0xc0000000 - 0xc5300000 ( 83 MB)
  30. modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  31. .text : 0xc0008000 - 0xc0574418 (5554 kB)
  32. .init : 0xc06b1000 - 0xc06e0000 ( 188 kB)
  33. .data : 0xc06e0000 - 0xc0709f20 ( 168 kB)
  34. .bss : 0xc070b000 - 0xc074f040 ( 273 kB)
  35. SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  36. NR_IRQS:16 nr_irqs:16 16
  37. clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
  38. sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns
  39. Console: colour dummy device 80x30
  40. Calibrating delay loop... 1699.02 BogoMIPS (lpj=8495104)
  41. pid_max: default: 32768 minimum: 301
  42. Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  43. Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  44. CPU: Testing write buffer coherency: ok
  45. Setting up static identity map for 0x80008200 - 0x80008258
  46. VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  47. clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  48. futex hash table entries: 256 (order: -1, 3072 bytes)
  49. pinctrl core: initialized pinctrl subsystem
  50. NET: Registered protocol family 16
  51. DMA: preallocated 2048 KiB pool for atomic coherent allocations
  52. Serial: AMBA PL011 UART driver
  53. 12080000.uart: ttyAMA0 at MMIO 0x12080000 (irq = 18, base_baud = 0) is a PL011 rev2
  54. uart-pl011 12090000.uart: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable.
  55. 12090000.uart: ttyAMA1 at MMIO 0x12090000 (irq = 19, base_baud = 0) is a PL011 rev2
  56. SCSI subsystem initialized
  57. libata version 3.00 loaded.
  58. usbcore: registered new interface driver usbfs
  59. usbcore: registered new interface driver hub
  60. usbcore: registered new device driver usb
  61. clocksource: Switched to clocksource arm,sp804
  62. NET: Registered protocol family 2
  63. TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  64. TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  65. TCP: Hash tables configured (established 1024 bind 1024)
  66. UDP hash table entries: 256 (order: 0, 4096 bytes)
  67. UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  68. NET: Registered protocol family 1
  69. RPC: Registered named UNIX socket transport module.
  70. RPC: Registered udp transport module.
  71. RPC: Registered tcp transport module.
  72. RPC: Registered tcp NFSv4.1 backchannel transport module.
  73. workingset: timestamp_bits=30 max_order=15 bucket_order=0
  74. squashfs: version 4.0 (2009/01/31) Phillip Lougher
  75. NFS: Registering the id_resolver key type
  76. Key type id_resolver registered
  77. Key type id_legacy registered
  78. ntfs: driver 2.1.32 [Flags: R/O].
  79. jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
  80. fuse init (API version 7.26)
  81. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  82. io scheduler noop registered
  83. io scheduler deadline registered (default)
  84. io scheduler cfq registered
  85. pinctrl-single 120f0000.pinmux: 234 pins at pa fe1f0000 size 936
  86. brd: module loaded
  87. ahci 10030000.sata: SSS flag set, parallel bus scan disabled
  88. ahci 10030000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
  89. ahci 10030000.sata: flags: ncq sntf stag pm led clo only pmp fbs slum part ccc sxs boh
  90. scsi host0: ahci
  91. ata1: SATA max UDMA/133 mmio [mem 0x10030000-0x10030fff] port 0x100 irq 20
  92. CONFIG_CLOSE_SPI_8PIN_4IO = y.
  93. at xm_select_FlashProtMgr() index:0x5,name:Macronix,chipSize:0x1000000.<<INFO>>
  94. at xm_setTB() g_SpiNorMFR:0xc2,chipsize:0x1000000 <No>.
  95. hisi-sfc hisi_spi_nor.0: lk=>8, 0x800000.
  96. hisi-sfc hisi_spi_nor.0: mx25l12835f (16384 Kbytes)
  97. 7 cmdlinepart partitions found on MTD device hi_sfc
  98. at XMMtd_RegisterProtFreeRgn() index:0,offset:0xf80000,size:0x80000.
  99. Creating 7 MTD partitions on "hi_sfc":
  100. 0x000000000000-0x000000050000 : "boot"
  101. 0x000000050000-0x000000430000 : "romfs"
  102. 0x000000430000-0x000000b10000 : "usr"
  103. 0x000000b10000-0x000000ca0000 : "web"
  104. 0x000000ca0000-0x000000f60000 : "custom"
  105. 0x000000f60000-0x000000f80000 : "logo"
  106. 0x000000f80000-0x000001000000 : "mtd"
  107. FEPHY:addr=1, la_am=0xc, ldo_am=0x4, r_tuning=0x1d
  108. libphy: hisi_femac_mii_bus: probed
  109. libphy: Fixed MDIO Bus: probed
  110. Generic PHY 10011100.mdio:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=10011100.mdio:01, irq=-1)
  111. phy_id=0x20669901, phy_mode=mii
  112. hisi-femac 10010000.ethernet: using random MAC address 36:45:a4:bd:6c:6c
  113. PPP generic driver version 2.4.2
  114. PPP BSD Compression module registered
  115. PPP Deflate Compression module registered
  116. PPP MPPE Compression module registered
  117. NET: Registered protocol family 24
  118. usbcore: registered new interface driver zd1201
  119. usbcore: registered new interface driver asix
  120. usbcore: registered new interface driver ax88179_178a
  121. usbcore: registered new interface driver cdc_ether
  122. usbcore: registered new interface driver net1080
  123. usbcore: registered new interface driver cdc_subset
  124. usbcore: registered new interface driver zaurus
  125. usbcore: registered new interface driver cdc_ncm
  126. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  127. ehci-platform: EHCI generic platform driver
  128. ehci-platform 11010000.ehci: EHCI Host Controller
  129. ehci-platform 11010000.ehci: new USB bus registered, assigned bus number 1
  130. ehci-platform 11010000.ehci: irq 22, io mem 0x11010000
  131. ehci-platform 11010000.ehci: USB 2.0 started, EHCI 1.00
  132. hub 1-0:1.0: USB hub found
  133. hub 1-0:1.0: 2 ports detected
  134. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  135. ohci-platform: OHCI generic platform driver
  136. ohci-platform 11000000.ohci: Generic Platform OHCI controller
  137. ohci-platform 11000000.ohci: new USB bus registered, assigned bus number 2
  138. ohci-platform 11000000.ohci: irq 23, io mem 0x11000000
  139. hub 2-0:1.0: USB hub found
  140. hub 2-0:1.0: 2 ports detected
  141. mousedev: PS/2 mouse device common for all mice
  142. ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  143. ata1.00: ATA-8: Hitachi HTS543232L9A300, FB4OC40C, max UDMA/133
  144. ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
  145. ata1.00: configured for UDMA/133
  146. scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54323 C40C PQ: 0 ANSI: 5
  147. sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
  148. sd 0:0:0:0: [sda] Write Protect is off
  149. sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  150. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  151. hibvt_rtc 120b0000.rtc: rtc core: registered 120b0000.rtc as rtc0
  152. hibvt_rtc 120b0000.rtc: RTC driver for hibvt enabled
  153. usbcore: registered new interface driver usbhid
  154. usbhid: USB HID core driver
  155. Initializing XFRM netlink socket
  156. NET: Registered protocol family 10
  157. sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  158. NET: Registered protocol family 17
  159. NET: Registered protocol family 15
  160. Key type dns_resolver registered
  161. PM: Hibernation image not present or could not be loaded.
  162. Warning: unable to open an initial console.
  163. usb 2-1: new low-speed USB device number 2 using ohci-platform
  164. input: HID 4555:1031 as /devices/platform/soc/11000000.ohci/usb2/2-1/2-1:1.0/0003:4555:1031.0001/input/input0
  165. hid-generic 0003:4555:1031.0001: input: USB HID v1.10 Keyboard [HID 4555:1031] on usb-11000000.ohci-1/input0
  166. input: HID 4555:1031 as /devices/platform/soc/11000000.ohci/usb2/2-1/2-1:1.1/0003:4555:1031.0002/input/input1
  167. hid-generic 0003:4555:1031.0002: input: USB HID v1.10 Mouse [HID 4555:1031] on usb-11000000.ohci-1/input1
  168. random: fast init done
  169. sd 0:0:0:0: [sda] Attached SCSI removable disk
  170. VFS: Mounted root (squashfs filesystem) readonly on device 31:1.
  171. Freeing unused kernel memory: 188K (c06b1000 - c06e0000)
  172. This architecture does not have kernel memory protection.
  173. sys_config: loading out-of-tree module taints kernel.
  174. load sys_config.ko for ...OK!
  175. Module himedia: init ok
  176. Hisilicon Media Memory Zone Manager
  177. hi_osal 1.0 init success!
  178. hi3536dv100_base: module license 'Proprietary' taints kernel.
  179. Disabling lock debugging due to kernel taint
  180. load base.ko ... OK!
  181. load sys.ko ...OK!
  182. load vdec.ko ....OK!
  183. load vdh firmware.ko OK
  184. load vgs.ko ...OK!
  185. load vpss.ko ...OK!
  186. load vou.ko OK!
  187. load hifb.ko OK!
  188. load hdmi.ko OK!
  189. load chnl.ko ...OK!
  190. at24c16
  191. :
  192. ========================================================
  193. at24c16
  194. :
  195. Driver Version=20150126 DateTime=Oct 26 2017-18:57:07.
  196. at24c16
  197. :
  198. Driver for HISI3535 Linux 4.9.37 .
  199. ===============================================================
  200. | AT24C16: SVN:54,Compiled by shaoweidong at Oct 26 2017 18:57:07 |
  201. ===============================================================
  202. gpio_i2c_wread_24c16 0x33:ff
  203. gpio_i2c_read_24c16 0x34:ff
  204. Hisilicon Watchdog Timer: 0.01 initialized. default_margin=60 sec (nowayout= 0, nodeamon= 1)
  205. ===============================================================
  206. | HIWDT: SVN:43,Compiled by shaoweidong at Feb 23 2018 18:57:44 |
  207. ===============================================================
  208. HISI_IRDA-MF @Hi3520Dv100R00
  209. ===============================================================
  210. | HIIR: SVN:49,Compiled by shaoweidong at Oct 23 2017 19:09:01 |
  211. ===============================================================
  212. hiir: init ok. ver=Oct 23 2017, 19:09:01.
  213. usbcore: registered new interface driver usb-storage
  214. load aio.ko OK!
  215. load ao.ko OK!
  216. load adec.ko OK!
  217. load acodec.ko OK!
  218. IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  219. hisi-femac 10010000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
  220. IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  221. at mtdchar_ioctl() <case XMMTD_GETLOCKVERSION> xmVersion:0x1001.
  222. at mtdchar_ioctl() <case XMMTD_GETLOCKVERSION> xmVersion:0x1001.
  223. random: crng init done
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!