pantiltjvc2.ino

/*
  DigitalReadSerial
  Reads a digital input on pin 2, prints the result to the serial monitor

  This example code is in the public domain.
*/

// digital pin 2 has a pushbutton attached to it. Give it a name:
int FDCTiltUp = A0;
int FDCTiltDown = A1;
int FDCPanLinks = A2;
int FDCPanRechts = A3;
int MotorPanLinks = 12;
int MotorPanRechts = 11;
int MotorTiltUp = 10;
int MotorTiltDown = 9;

// the setup routine runs once when you press reset:
void setup() {
  // initialize serial communication at 9600 bits per second:
  Serial.begin(115200);
  // make the pushbutton's pin an input:
  pinMode(FDCTiltUp, INPUT);
  pinMode(FDCTiltDown, INPUT);
  pinMode(FDCPanLinks, INPUT);
  pinMode(FDCPanRechts, INPUT);

  pinMode(MotorTiltUp, OUTPUT);
  pinMode(MotorTiltUp, OUTPUT);
  pinMode(MotorPanLinks, OUTPUT);
  pinMode(MotorPanRechts, OUTPUT);


  digitalWrite(MotorTiltUp, LOW);
  digitalWrite(MotorTiltUp, LOW);
  digitalWrite(MotorPanLinks, LOW);
  digitalWrite(MotorPanRechts, LOW);


}

// the loop routine runs over and over again forever:
void loop() {
  // read the input pin:
  //  int buttonState = digitalRead(FDCpandown);
  // print out the state of the button:
  Serial.print(digitalRead(FDCTiltUp));
  Serial.print(digitalRead(FDCTiltDown));
  Serial.print(digitalRead(FDCPanLinks));
  Serial.println(digitalRead(FDCPanRechts));
  delay(1);        // delay in between reads for stability




//  while (digitalRead(FDCPanLinks) == 1) {
//    digitalWrite(MotorPanLinks, HIGH);
//    delay(200);
//    digitalWrite(MotorPanLinks, LOW );
//    delay(200);
//  }
//
//
//  while (digitalRead(FDCPanRechts) == 1) {
//    digitalWrite(MotorPanRechts, HIGH);
//    delay(200);
//    digitalWrite(MotorPanRechts, LOW );
//    delay(200);
//  }

  ////////////

    while (digitalRead(FDCTiltUp) == 1) {
    digitalWrite(MotorTiltUp, HIGH);
    delay(2);
    digitalWrite(MotorTiltUp, LOW );
    delay(2);
  }


  while (digitalRead(FDCTiltDown) == 1) {
    digitalWrite(MotorTiltDown, HIGH);
    delay(2);
    digitalWrite(MotorTiltDown, LOW );
    delay(2);
  }






}