Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000@0] Initializing cgroup subsys cpuset
- [ 0.000000@0] Initializing cgroup subsys cpu
- [ 0.000000@0] Initializing cgroup subsys cpuacct
- [ 0.000000@0] Linux version 3.14.29 (portisch@ubuntu) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) ) #1 SMP Tue Sep 7 08:30:05 CEST 2021
- [ 0.000000@0] CPU: AArch64 Processor [410fd034] revision 4
- [ 0.000000@0] no prop version_code
- [ 0.000000@0] CoreELEC dt-id: gxl_p212_1g_nand
- [ 0.000000@0] Machine model: Amlogic
- [ 0.000000@0] bootconsole [earlycon0] enabled
- [ 0.000000@0] fdt Reserved memory table:
- [ 0.000000@0] linux,meson-fb: 0x000000003d100000 - 0x000000003f100000 (32 MiB)
- [ 0.000000@0] linux,di: 0x000000003b300000 - 0x000000003d100000 (30 MiB)
- [ 0.000000@0] DI: DI reserved memory: created CMA memory pool at 0x000000003b300000, size 30 MiB
- [ 0.000000@0] linux,ion-dev: 0x0000000039300000 - 0x000000003b300000 (32 MiB)
- [ 0.000000@0] linux,vdin1_cma: 0x0000000038000000 - 0x0000000039000000 (16 MiB)
- [ 0.000000@0] cma: Reserved 16 MiB at 38000000, total cma pages:4096
- [ 0.000000@0] linux,ppmgr: 0x0000000039300000 - 0x0000000039300000 (0 MiB)
- [ 0.000000@0] linux,codec_mm_cma: 0x0000000027800000 - 0x0000000033800000 (192 MiB)
- [ 0.000000@0] cma: Reserved 192 MiB at 27800000, total cma pages:53248
- [ 0.000000@0] linux,picdec: 0x0000000039300000 - 0x0000000039300000 (0 MiB)
- [ 0.000000@0] Reserved memory: incorrect alignment of CMA region
- [ 0.000000@0] linux,codec_mm_reserved: 0x0000000033f00000 - 0x0000000038000000 (65 MiB)
- [ 0.000000@0] fdt Reserved memory total: 370 MiB
- [ 0.000000@0] cma: Reserved 8 MiB at 27000000, total cma pages:55296
- [ 0.000000@0] On node 0 totalpages: 249088
- [ 0.000000@0] Normal zone: 5368 pages used for memmap
- [ 0.000000@0] Normal zone: 0 pages reserved
- [ 0.000000@0] Normal zone: 249088 pages, LIFO batch:31
- [ 0.000000@0] psci: probing function IDs from device-tree
- [ 0.000000@0] PERCPU: Embedded 12 pages/cpu @ffffffc0392a5000 s16704 r8192 d24256 u49152
- [ 0.000000@0] pcpu-alloc: s16704 r8192 d24256 u49152 alloc=12*4096
- [ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243720
- [ 0.000000@0] Kernel command line: rootfstype=ramfs init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xc81004c0 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=permissive logo=osd1,loaded,0x3d800000,1080p60hz maxcpus=4 vout=1080p60hz,enable hdmimode=1080p60hz cvbsmode=576cvbs hdmitx= cvbsdrv=0 androidboot.firstboot=0 jtag=apao androidboot.hardware=amlogic console=tty0 systemd.show_status=auto
- [ 0.000000@0] logo: osd1
- [ 0.000000@0] logo: loaded
- [ 0.000000@0] logo: 0x3d800000
- [ 0.000000@0] logo: 1080p60hz
- [ 0.000000@0] vout_serve: 1080p60hz
- [ 0.000000@0] vout_serve: en: 1
- [ 0.000000@0] vout_serve: set_vout_init_vmode: 1080p60hz
- [ 0.000000@0] vout_serve: 1080p60hz
- [ 0.000000@0] vout_serve: enable: 1
- [ 0.000000@0] logo: get hdmimode: 1080p60hz
- [ 0.000000@0] logo: get cvbsmode: 576cvbs
- [ 0.000000@0] tv_vout: cvbs performance line = 0
- [ 0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000@0] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.000000@0] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.000000@0] Memory: 596456K/996352K available (7457K kernel code, 857K rwdata, 4424K rodata, 936K init, 2900K bss, 399896K reserved)
- [ 0.000000@0] Virtual kernel memory layout:
- [ 0.000000@0] vmalloc : 0xffffff8000000000 - 0xffffff8040000000 ( 1024 MB)
- [ 0.000000@0] vmemmap : 0xffffff8040010000 - 0xffffff804150d800 ( 20 MB)
- [ 0.000000@0] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
- [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc03d100000 ( 977 MB)
- [ 0.000000@0] .init : 0xffffffc001c1c000 - 0xffffffc001d06140 ( 937 kB)
- [ 0.000000@0] .text : 0xffffffc001080000 - 0xffffffc001c1b7b4 ( 11886 kB)
- [ 0.000000@0] .data : 0xffffffc001d07000 - 0xffffffc001ddd460 ( 858 kB)
- [ 0.000000@0] PM: Registered nosave memory: [mem 0x01080000-0x01c1afff]
- [ 0.000000@0] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000@0] arch_multi_cluster:0
- [ 0.000000@0] Hierarchical RCU implementation.
- [ 0.000000@0] RCU debugfs-based tracing is enabled.
- [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
- [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
- [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0
- [ 0.000000@0] Architected cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
- [ 0.008244@0] meson_bc_timer: mclk->mux_reg =ffffff800000c990,mclk->reg =ffffff800000e994
- [ 0.016788@0] Console: colour dummy device 80x25
- [ 0.021086@0] console [tty0] enabled
- [ 0.024671@0] bootconsole [earlycon0] disabled
- [ 0.030370@0] allocated 4194304 bytes of page_cgroup
- [ 0.030380@0] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.030402@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
- [ 0.030419@0] pid_max: default: 32768 minimum: 301
- [ 0.030559@0] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
- [ 0.030572@0] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
- [ 0.035882@0] Initializing cgroup subsys memory
- [ 0.035923@0] Initializing cgroup subsys devices
- [ 0.035935@0] Initializing cgroup subsys freezer
- [ 0.035945@0] Initializing cgroup subsys blkio
- [ 0.035955@0] Initializing cgroup subsys net_prio
- [ 0.036006@0] ftrace: allocating 26020 entries in 102 pages
- [ 0.063727@0] /cpus/cpu@0: Missing clock-frequency property
- [ 0.063756@0] /cpus/cpu@1: Missing clock-frequency property
- [ 0.063767@0] /cpus/cpu@2: Missing clock-frequency property
- [ 0.063779@0] /cpus/cpu@3: Missing clock-frequency property
- [ 0.065350@0] Meson chip version = RevA (21:A - 82:0)
- [ 0.065815@1] CPU1: Booted secondary processor
- [ 0.066205@2] CPU2: Booted secondary processor
- [ 0.066552@3] CPU3: Booted secondary processor
- [ 0.066621@0] Brought up 4 CPUs
- [ 0.066659@0] SMP: Total of 4 processors activated.
- [ 0.067196@0] devtmpfs: initialized
- [ 0.073171@0] sched: registering cpufreq notifiers for scale-invariant loads
- [ 0.073222@0] instabooting: 0
- [ 0.082266@0] cma: cma_init_reserved_areas, use_cma_first:1
- [ 0.082361@0] pinctrl core: initialized pinctrl subsystem
- [ 0.082963@0] regulator-dummy: no parameters
- [ 0.083751@0] NET: Registered protocol family 16
- [ 0.084896@0] ramoops: using module parameters
- [ 0.085455@0] pstore: Registered ramoops as persistent store backend
- [ 0.085478@0] ramoops: attached 0x100000@0x7300000, ecc: 0/0
- [ 0.086339@0] aml_vdac_init: module init
- [ 0.086491@0] register canvas platform driver
- [ 0.086566@0] register rdma platform driver
- [ 0.087535@0] vdso: 2 pages (1 code, 1 data) at base ffffffc001d10000
- [ 0.088542@0] DMA: preallocated 2048 KiB pool for atomic allocations
- [ 0.089773@0] software IO TLB [mem 0x24400000-0x24800000] (4MB) mapped at [ffffffc024400000-ffffffc0247fffff]
- [ 0.090236@0] aml_i2c version: 20140813
- [ 0.090436@0] i2c-core: driver [pmu4] using legacy resume method
- [ 0.090509@0] codec_mm:codec_mm_module_init
- [ 0.090789@0] gxbb_mpll_clk: register mpll_clk_out0 success done
- [ 0.090803@0] gxbb_mpll_clk: register mpll_clk_out1 success done
- [ 0.090816@0] gxbb_mpll_clk: register mpll_clk_out2 success done
- [ 0.091027@0] clk_sys: register PLL sys_pll success done
- [ 0.091045@0] gxl_clk: [ xtal ] ->clockrate: 24000000Hz
- [ 0.091055@0] gxl_clk: [ 32Khz ] ->clockrate: 32000Hz
- [ 0.091064@0] gxl_clk: [ clk81 ] ->clockrate: 166666666Hz
- [ 0.091073@0] gxl_clk: [ fixed_pll ] ->clockrate: 2000000000Hz
- [ 0.091082@0] gxl_clk: [ fclk_div2 ] ->clockrate: 1000000000Hz
- [ 0.091091@0] gxl_clk: [ fclk_div3 ] ->clockrate: 666666666Hz
- [ 0.091100@0] gxl_clk: [ fclk_div4 ] ->clockrate: 500000000Hz
- [ 0.091109@0] gxl_clk: [ fclk_div5 ] ->clockrate: 400000000Hz
- [ 0.091117@0] gxl_clk: [ fclk_div7 ] ->clockrate: 285714285Hz
- [ 0.091153@0] gxl_clk: clock initialization complete
- [ 0.091356@0] clkmsr: Gxl msr_clk_reg0=ffffff800003a75c,msr_clk_reg2=ffffff800003c764
- [ 0.093672@0] aml_iomap: amlogic iomap probe done
- [ 0.094128@0] pinmux-gxl c1109880.pinmux: Init pinux probe!
- [ 0.095277@0] pinmux-gxl c1109880.pinmux: Probed amlogic pinctrl driver
- [ 0.095708@0] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xb0)
- [ 0.095739@0] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xb0)
- [ 0.095899@0] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xb0)
- [ 0.095925@0] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xb0)
- [ 0.098272@0] dvfs [scpi_dvfs_get_opps] - buf.opp[0].freq_hz = 100000000
- [ 0.098290@0] dvfs [scpi_dvfs_get_opps] - buf.opp[1].freq_hz = 250000000
- [ 0.098300@0] dvfs [scpi_dvfs_get_opps] - buf.opp[2].freq_hz = 500000000
- [ 0.098309@0] dvfs [scpi_dvfs_get_opps] - buf.opp[3].freq_hz = 667000000
- [ 0.098319@0] dvfs [scpi_dvfs_get_opps] - buf.opp[4].freq_hz = 1000000000
- [ 0.098328@0] dvfs [scpi_dvfs_get_opps] - buf.opp[5].freq_hz = 1200000000
- [ 0.098337@0] dvfs [scpi_dvfs_get_opps] - buf.opp[6].freq_hz = 1512000000
- [ 0.098347@0] dvfs [scpi_dvfs_get_opps] - new count 7, max_freq 1512000000
- [ 0.100394@0] codec_mm has 2 memory regions
- [ 0.100452@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_cma ok
- [ 0.100471@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_reserved ok
- [ 0.100570@0] codec_mm has 2 memory regions
- [ 0.100587@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_cma ok
- [ 0.100603@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_reserved ok
- [ 0.102354@0] vpu: driver version: v03
- [ 0.102400@0] vpu: load vpu_clk: 666667000Hz(7)
- [ 0.102487@0] vpu: vpu_probe OK
- [ 0.103963@0] tv_vout: tvout_probe
- [ 0.103988@0] tv_vout: chrdev devno 265289728 for disp
- [ 0.103997@0] vout_notify: vout_register_server
- [ 0.104006@0] tv_vout: register tv module server ok
- [ 0.104259@0] tv_vout: create cdev tv
- [ 0.104274@0] tv_vout: tvout_probe OK
- [ 0.104781@0] canvas_probe reg=00000000c8838000,size=400
- [ 0.104816@0] canvas maped reg_base =ffffff800008e000
- [ 0.108601@0] rdma_probe
- [ 0.313406@0] bio: create slab <bio-0> at 0
- [ 0.314329@0] SCSI subsystem initialized
- [ 0.314851@0] usbcore: registered new interface driver usbfs
- [ 0.314951@0] usbcore: registered new interface driver hub
- [ 0.315071@0] usbcore: registered new device driver usb
- [ 0.315841@0] i2c-gpio i2c_gpio.39: using pins 172 (SDA) and 173 (SCL)
- [ 0.316039@0] pps_core: LinuxPPS API ver. 1 registered
- [ 0.316052@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.316116@0] PTP clock support registered
- [ 0.316633@0] hdmitx: system: amhdmitx_init
- [ 0.316653@0] hdmitx: system: Ver: 2014May6
- [ 0.316877@0] hdmitx: system: amhdmitx_probe
- [ 0.317215@0] hdmitx: system: not find match init-data
- [ 0.317234@0] hdmitx hpd irq = 89
- [ 0.317785@0] hdmitx20: Mapped PHY: 0xc0800000
- [ 0.317807@0] hdmitx20: Mapped PHY: 0xc1104400
- [ 0.317834@0] hdmitx20: Mapped PHY: 0xc8100000
- [ 0.317844@0] hdmitx20: Mapped PHY: 0xc8834000
- [ 0.317858@0] hdmitx20: Mapped PHY: 0xc883a000
- [ 0.317867@0] hdmitx20: Mapped PHY: 0xc883c000
- [ 0.317879@0] hdmitx20: Mapped PHY: 0xd0100000
- [ 0.317890@0] hdmitx20: Mapped PHY: 0xda83a000
- [ 0.317907@0] hdmitx: alread display in uboot 0x10
- [ 0.317949@0] avmute set to 1
- [ 0.318432@0] tv_vout: tv_set_current_vmode[930]fps_target_mode=19
- [ 0.318453@0] tv_vout: mode is 19,sync_duration_den=1,sync_duration_num=60
- [ 0.318471@0] tv_vout: already display in uboot
- [ 0.318480@0] vout_serve: vinfo mode is: 1080p60hz
- [ 0.318488@0] vout_serve: init mode 1080p60hz
- [ 0.318733@0] vout_serve: create_vout_fops OK
- [ 0.318746@0] vout_serve: create vout attribute OK
- [ 0.318754@0] vout_serve: meson_vout_probe OK
- [ 0.318955@0] logo: logo_init
- [ 0.319331@0] osd_rdma: osd_rdma_init: rdma_table p=0x27201000,op=0x27201000 , v=0xffffff80000a9000
- [ 0.319380@0] rdma_register, rdma_table_addr ffffff80000b9000 rdma_table_addr_phy 27202000 reg_buf ffffffc0103be000
- [ 0.319394@0] rdma_register success, handle 1 table_size 4096
- [ 0.319403@0] osd_rdma: osd_rdma_init:osd reset rdma handle = 1.
- [ 0.319433@0] rdma_register, rdma_table_addr ffffff80000c9000 rdma_table_addr_phy 27203000 reg_buf ffffffc0103bf000
- [ 0.319447@0] rdma_register success, handle 2 table_size 4096
- [ 0.319455@0] osd_rdma: osd_rdma_init:osd rdma handle = 2.
- [ 0.320014@0] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.321827@0] Switched to clocksource arch_sys_counter
- [ 0.325007@0] hdmitx: system: irq 80000002
- [ 0.333857@0] FS-Cache: Loaded
- [ 0.343259@1] NET: Registered protocol family 2
- [ 0.343749@1] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.343825@1] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
- [ 0.343934@1] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.344015@1] TCP: reno registered
- [ 0.344029@1] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.344058@1] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.344245@1] NET: Registered protocol family 1
- [ 0.344471@1] RPC: Registered named UNIX socket transport module.
- [ 0.344484@1] RPC: Registered udp transport module.
- [ 0.344492@1] RPC: Registered tcp transport module.
- [ 0.344500@1] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.345078@1] pwm: probe ok
- [ 0.345384@1] wifi: power_on_pin_OD = 0;
- [ 0.345403@1] aml_wifi wifi.34: [wifi_dev_probe] no power_on_pin2
- [ 0.345445@1] aml_wifi wifi.34: [pwm_double_channel_conf_dt] pwm phandle val=25;pwm-channel1=4;pwm-channel2=12
- [ 0.345460@1] aml_wifi wifi.34: [pwm_double_channel_conf_dt] pwm_config1[0] = 30541
- [ 0.345472@1] aml_wifi wifi.34: [pwm_double_channel_conf_dt] pwm_config2[0] = 30518
- [ 0.345485@1] aml_wifi wifi.34: [pwm_double_channel_conf_dt] pwm_config1[1] = 15270
- [ 0.345497@1] aml_wifi wifi.34: [pwm_double_channel_conf_dt] pwm_config2[1] = 15259
- [ 0.345510@1] aml_wifi wifi.34: [pwm_double_channel_conf_dt] pwm_config1[2] = 6
- [ 0.345522@1] aml_wifi wifi.34: [pwm_double_channel_conf_dt] pwm_config2[2] = 9
- [ 0.345534@1] aml_wifi wifi.34: [pwm_double_channel_conf_dt] wifi pwm dt ok
- [ 0.345562@1] aml_wifi wifi.34: [pwm_double_channel_conf] wifi pwm conf ok
- [ 0.345615@1] aml_wifi wifi.34: [wifi_dev_probe] dhd_static_buf setup
- [ 0.345696@1] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem: WIFI MEM Allocated
- [ 0.345710@1] aml_wifi wifi.34: [wifi_dev_probe] interrupt_pin=241
- [ 0.345721@1] aml_wifi wifi.34: [wifi_dev_probe] irq_num=100, irq_trigger_type=1
- [ 0.345733@1] aml_wifi wifi.34: [wifi_dev_probe] power_on_pin=240
- [ 0.345743@1] aml_wifi wifi.34: [wifi_dev_probe] clock_32k_pin=0
- [ 0.346056@1] aml_wifi wifi.34: [wifi_setup_dt] wifi_setup_dt
- [ 0.346100@1] aml_wifi wifi.34: [wifi_setup_dt] interrupt_pin(241)
- [ 0.346120@1] aml_wifi wifi.34: [wifi_setup_dt] power_on_pin(240)
- [ 0.346333@1] Unpacking initramfs...
- [ 0.362239@1] Freeing initrd memory: 5492K (ffffffc03395a000 - ffffffc033eb7000)
- [ 0.364772@1] futex hash table entries: 1024 (order: 4, 65536 bytes)
- [ 0.374879@1] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.375220@1] FS-Cache: Netfs 'nfs' registered for caching
- [ 0.375896@1] NFS: Registering the id_resolver key type
- [ 0.375948@1] Key type id_resolver registered
- [ 0.375958@1] Key type id_legacy registered
- [ 0.375974@1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 0.376249@1] msgmni has been set to 1607
- [ 0.377369@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
- [ 0.377462@1] io scheduler noop registered (default)
- [ 0.377475@1] io scheduler deadline registered
- [ 0.377503@1] io scheduler cfq registered
- [ 0.378465@1] meson-rng c8834000.rng: hwrng registered
- [ 0.382312@1] loop: module loaded
- [ 0.382940@1] zram: Created 1 device(s) ...
- [ 0.384836@1] tun: Universal TUN/TAP device driver, 1.6
- [ 0.384861@1] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.388995@1] libphy: stmmac: probed
- [ 0.389021@1] eth0: PHY ID 01814400 at 8 IRQ 41 (stmmac-0:08) active
- [ 0.389493@1] PPP generic driver version 2.4.2
- [ 0.389748@1] NET: Registered protocol family 24
- [ 0.389879@1] usbcore: registered new interface driver smsc95xx
- [ 0.390270@1] platform c9000000.dwc3: Driver dwc3 requests probe deferral
- [ 0.390443@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.390471@1] ehci-h20ahb: H20AHB-EHCI Host Controller driver
- [ 0.390728@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.391094@1] usbcore: registered new interface driver usb-storage
- [ 0.391325@1] usbcore: registered new interface driver usbserial
- [ 0.391423@1] usbcore: registered new interface driver usbserial_generic
- [ 0.391516@1] usbserial: USB Serial support registered for generic
- [ 0.391616@1] usbcore: registered new interface driver pl2303
- [ 0.391712@1] usbserial: USB Serial support registered for pl2303
- [ 0.392637@1] amlogic-new-usb2 d0078000.usb2phy: USB2 phy probe:phy_mem:0xd0078000, iomap phy_base:0xffffff800010a000
- [ 0.392894@1] amlogic-new-usb3 d0078080.usb3phy: This phy has no usb port
- [ 0.392926@1] amlogic-new-usb3 d0078080.usb3phy: USB3 phy probe:phy_mem:0xd0078080, iomap phy_base:0xffffff800011a080
- [ 0.393261@1] mousedev: PS/2 mouse device common for all mice
- [ 0.393609@1] i2c /dev entries driver
- [ 0.394764@1] ledtrig-cpu: registered to indicate activity on CPUs
- [ 0.394958@1] hidraw: raw HID events driver (C) Jiri Kosina
- [ 0.397582@1] usbcore: registered new interface driver usbhid
- [ 0.397607@1] usbhid: USB HID core driver
- [ 0.397821@1] ashmem: initialized
- [ 0.398264@1] meson_uart c81004c0.serial: ==uart0 reg addr = ffffff800012a4c0
- [ 0.398305@1] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart
- [ 0.398329@1] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200
- [ 0.661971@0] hdmitx: plugin
- [ 0.717380@0] EDID Parser:
- [ 0.717864@0] hdmitx: get dtd0 vic: 95
- [ 0.717870@0] hdmitx: get dtd1 vic: 16
- [ 0.717912@0] hdmitx: edid: change preferred_mode from 95 to 93
- [ 0.717914@0] hdmitx: edid: find IEEEOUT
- [ 0.717920@0] hdmitx: edid: check sum valid
- [ 0.717921@0] hdmitx: edid: check sum valid
- [ 0.717928@0] hdmitx: update rx hdr info 5 at edid parsing
- [ 0.717934@0] hdmitx: edid: check sum valid
- [ 0.717935@0] hdmitx: edid: check sum valid
- [ 0.717938@0] hdmitx: edid: blk0 raw data
- [ 0.717975@0] 00ffffffffffff004dd9067201010101011e010380a65d780a0dc9a057479827
- [ 0.717975@0] 12484c2108008180a9c0714fb300010101010101010104740030f2705a80b058
- [ 0.717975@0] 8a007ca66300001e023a801871382d40582c45007ca66300001e000000fc0053
- [ 0.717975@0] 4f4e5920545620202a33300a000000fd00173e0e461e000a20202020202001d1
- [ 0.717975@0]
- [ 0.717975@0]
- [ 0.717977@0] hdmitx: edid: blk1 raw data
- [ 0.718013@0] 02035af0525d5e5f621f101405130420223c3e120311022f0d7f071507503d07
- [ 0.718013@0] bc570600670400830f00006e030c002000b83c2b008001020304eb0146d00048
- [ 0.718013@0] 037a88627697e200f9e305df01e50e60616566e6060d018aac10011d007251d0
- [ 0.718013@0] 1e206e2855007ca66300001e0000000000000000000000000000000000000035
- [ 0.718013@0]
- [ 0.718013@0]
- [ 0.718043@0] [RX]-receive ksv list len:1,depth:1,cas:0,dev:0
- [ 0.718052@0] hdmitx: video: auto - get current mode: 1080p60hz vmode_e 19
- [ 0.718055@0] hdmitx: stream colourdepth was 8 in para 0x01d70de8 (invalid)
- [ 0.718057@0] hdmitx: update rx hdr info 5
- [ 0.718059@0] hdmitx: update physcial size: 1660 930
- [ 0.718079@0] hdmitx: hdev->para now = para at 0x01d72c48
- [ 0.718083@0] hdmitx: Stream colourdepth is 8 in para 0x01d72c48 (1920x1080p60hz - VIC: 16)
- [ 0.718089@0] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16
- [ 0.718095@0] hdmtix: set audio
- [ 0.718107@0] hdmitx tx_aud_src = 0
- [ 0.718134@0] hdmitx: fs = 0, cd = 4, tmds_clk = 148500
- [ 0.718138@0] hdmitx aud_n_para = 6144
- [ 0.718155@0] hdmitx set channel status
- [ 2.203503@3] console [ttyS0] enabled
- [ 2.207594@0] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff800012c4c0
- [ 2.214226@0] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart
- [ 2.224373@0] hdmitx: system: hdmitx_hdcp_init
- [ 2.228590@0] aml_vrtc rtc.33: rtc core: registered aml_vrtc as rtc0
- [ 2.234536@0] secmon has 1 memory regions
- [ 2.238184@0] secmon: share in base: 0xffffff800013e000, share out base: 0xffffff800014a000
- [ 2.246452@0] secmon secmon.4: assigned reserved memory node linux,secmon ok
- [ 2.253459@0] secmon: probe done
- [ 2.257079@0] storage: storage in base: 0xffffff8001a00000
- [ 2.262047@0] storage: storage out base: 0xffffff8001a80000
- [ 2.267589@0] storage: storage block base: 0xffffff8001b00000
- [ 2.273255@0] storage: probe done!
- [ 2.277249@0] aml_sd_emmc_probe: line 3594
- [ 2.280670@0] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
- [ 2.290623@0] aml_sd_emmc_reg_init 1149
- [ 2.293935@0] get property: ocr_avail, value:0x00200080
- [ 2.300370@0] get property: f_min, value:300000
- [ 2.306464@0] get property: f_max, value:100000000
- [ 2.312845@0] get property: max_req_size, value:0x00020000
- [ 2.319329@0] get property: pinname, str:emmc
- [ 2.325103@0] get property: card_type, value:1
- [ 2.330795@0] get property: gpio_dat3, str:
- [ 2.336241@0] get property: hw_reset, str:
- [ 2.341671@0] emmc:pdata->caps = c0000d47
- [ 2.345623@0] emmc:pdata->caps2 = 18060
- [ 2.349424@0] emmc:pdata->pm_caps = 0
- [ 2.353068@0] storage 1, boot 1
- [ 2.356136@0] get_storage_dev return 1
- [ 2.391836@0] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
- [ 2.397334@0] aml_sd_emmc_probe: line 3594
- [ 2.397832@0] aml_sd_emmc_reg_init 1149
- [ 2.400017@0] get property: ocr_avail, value:0x00200080
- [ 2.406445@0] get property: f_min, value:400000
- [ 2.412552@0] get property: f_max, value:100000000
- [ 2.418882@0] get property: max_req_size, value:0x00020000
- [ 2.425332@0] get property: irq_in, value:3
- [ 2.431020@0] get property: irq_out, value:5
- [ 2.436811@0] get property: gpio_cd, str:
- [ 2.442152@0] get property: pinname, str:sd
- [ 2.447753@0] get property: jtag_pin, str:
- [ 2.453277@0] get property: card_type, value:5
- [ 2.458880@0] get property: gpio_dat3, str:
- [ 2.464331@0] sd:pdata->caps = 7
- [ 2.467516@0] sd:pdata->caps2 = 0
- [ 2.470780@0] sd:pdata->pm_caps = 0
- [ 2.512051@2] [aml_is_card_insert] card OUT
- [ 2.512135@1] [aml_is_card_insert] card OUT
- [ 2.514759@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
- [ 2.520559@1] aml_sd_emmc_probe: line 3594
- [ 2.524957@1] aml_sd_emmc_reg_init 1149
- [ 2.528432@1] get property: ocr_avail, value:0x00200080
- [ 2.534859@1] get property: f_min, value:400000
- [ 2.540971@1] get property: f_max, value:200000000
- [ 2.547359@1] get property: max_req_size, value:0x00020000
- [ 2.553832@1] get property: pinname, str:sdio
- [ 2.559603@1] get property: card_type, value:3
- [ 2.565328@1] sdio:pdata->caps = 7810f
- [ 2.568260@3] emmc: try set sd/emmc to DDR mode
- [ 2.568312@3] emmc: new DDR MMC card at address 0001
- [ 2.569134@3] emmc: clock 50000000, 8-bit-bus-width
- [ 2.569134@3]
- [ 2.569135@3] mmcblk0: emmc:0001 000000 14.5 GiB
- [ 2.569294@3] mmcblk0boot0: emmc:0001 000000 partition 1 2.00 MiB
- [ 2.569443@3] mmcblk0boot1: emmc:0001 000000 partition 2 2.00 MiB
- [ 2.569619@3] mmcblk0rpmb: emmc:0001 000000 partition 3 128 KiB
- [ 2.570758@3] mmcblk0: unknown partition table
- [ 2.571727@3] [mmc_read_partition_tbl] mmc read partition OK!
- [ 2.571728@3] add_emmc_partition
- [ 2.572169@3] [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000
- [ 2.572365@3] [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000
- [ 2.572527@3] [mmcblk0p03] cache offset 0x000006c00000, size 0x000020000000
- [ 2.572669@3] [mmcblk0p04] env offset 0x000027400000, size 0x000000800000
- [ 2.572810@3] [mmcblk0p05] logo offset 0x000028400000, size 0x000002000000
- [ 2.572976@3] [mmcblk0p06] recovery offset 0x00002ac00000, size 0x000002000000
- [ 2.573119@3] [mmcblk0p07] rsv offset 0x00002d400000, size 0x000000800000
- [ 2.573273@3] [mmcblk0p08] tee offset 0x00002e400000, size 0x000000800000
- [ 2.573439@3] [mmcblk0p09] crypt offset 0x00002f400000, size 0x000002000000
- [ 2.573594@3] [mmcblk0p10] misc offset 0x000031c00000, size 0x000002000000
- [ 2.573735@3] [mmcblk0p11] instaboot offset 0x000034400000, size 0x000020000000
- [ 2.573885@3] [mmcblk0p12] boot offset 0x000054c00000, size 0x000002000000
- [ 2.574067@3] [mmcblk0p13] system offset 0x000057400000, size 0x000040000000
- [ 2.574217@3] [mmcblk0p14] data offset 0x000097c00000, size 0x00030c200000
- [ 2.574263@3] card key: card_blk_probe.
- [ 2.574269@3] emmc_key_init:527 emmc key lba_start:0x12020,lba_end:0x12220
- [ 2.574273@3] emmc key: emmc_key_init:552 ok.
- [ 2.578401@3] amlmmc_dtb_init: register dtb chardev
- [ 2.578401@3] calc cbf952c9, store cbf952c9
- [ 2.582404@3] calc cbf952c9, store cbf952c9
- [ 2.582408@3] total valid 2
- [ 2.583234@3] amlmmc_dtb_init: register dtb chardev OK
- [ 2.583235@3] Exit aml_emmc_partition_ops OK.
- [ 2.584520@3] mmcblk0boot1: unknown partition table
- [ 2.585663@3] mmcblk0boot0: unknown partition table
- [ 2.586013@3] clear_emmc_wait_flag
- [ 2.791471@1] sdio:pdata->caps2 = 0
- [ 2.794901@1] sdio:pdata->pm_caps = 1
- [ 2.831834@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
- [ 2.832401@1] ion_dev has 1 memory regions
- [ 2.838962@3] fb: osd_init_module
- [ 2.839485@3] fb: viu vsync irq: 35
- [ 2.842828@3] meson-fb has 1 memory regions
- [ 2.846978@3] meson-fb meson-fb.16: assigned reserved memory node linux,meson-fb ok
- [ 2.854562@3] fb: osd_probe vinfo:ffffffc001d76270
- [ 2.859288@3] fb: init fbdev bpp is:32
- [ 2.863612@3] fb: set osd0 reverse as NONE
- [ 2.882168@0] fb: osd probe OK
- [ 2.882477@0] ge2d: ge2d_init_module
- [ 2.883141@0] ge2d: ge2d_dev major:241
- [ 2.887250@3] ge2d: ge2d clock is 400 MHZ
- [ 2.890812@3] ge2d: ge2d: pdev=ffffffc0103e0000, irq=182, rstc=0xffffffc023fdc5c0, clk=ffffffc0102fde00
- [ 2.900176@3] ge2d: mapped phy: 0xd0160000
- [ 2.904189@3] ge2d: ge2d start monitor
- [ 2.907951@0] ge2d: ge2d workqueue monitor start
- [ 2.908550@3] codec:Amlogic A/V streaming port init
- [ 2.910395@3] codec:get gate demux control ok ffffffc023fbfa80
- [ 2.910401@3] codec:get gate parser_top control ok ffffffc023fbf700
- [ 2.910406@3] codec:get gate vpu_intr control ok ffffffc023fbf380
- [ 2.910412@3] codec:get gate vdec control ok ffffffc023fbfc40
- [ 2.911515@3] codec:[tsync_pcr_init]init success.
- [ 2.911710@3] codec:amvideocap_probe,amvideocap
- [ 2.911715@3] codec:use cma buf.
- [ 2.914458@3] codec:vdec_request_irq ffffffc0015a48d8, vsync
- [ 2.914754@3] codec:create_ge2d_work_queue video task ok
- [ 2.964414@3] rdma_register, rdma_table_addr ffffff8000431000 rdma_table_addr_phy 27210000 reg_buf ffffffc023840000
- [ 2.974576@3] rdma_register success, handle 3 table_size 32768
- [ 2.980337@3] video_rdma:rdma_init video rdma handle = 3.
- [ 2.985710@3] codec:used fix clk for vdec clk source!
- [ 2.990690@3] codec:register clk_set_setting cpu[33]
- [ 2.996312@3] DI: di_module_init ok.
- [ 2.999144@3] DI: di_module_init: major 237
- [ 3.003549@3] DI: di_probe
- [ 3.006144@3] deinterlace has 1 memory regions
- [ 3.010391@3] DI: di reveser memory 0x3b300000, size 30MB.
- [ 3.010401@3] deinterlace deinterlace.26: assigned reserved memory node linux,di ok
- [ 3.017957@3] DI-di_probe: get flag_cma error.
- [ 3.022372@3] di_irq:78,timerc_irq:38
- [ 3.026144@3] rdma_register, rdma_table_addr ffffff80001a9000 rdma_table_addr_phy 2720a000 reg_buf ffffffc02388e000
- [ 3.036327@3] rdma_register success, handle 4 table_size 8192
- [ 3.042010@3] DI: di_probe allocate rdma channel 4.
- [ 3.046839@3] DI: DI hw version 2.
- [ 3.050208@3] 0x000000db:Y=db,U=0,V=0
- [ 3.053826@3] 0x000000dc:Y=dc,U=0,V=0
- [ 3.057444@3] 0x000000dd:Y=dd,U=0,V=0
- [ 3.061066@3] 0x000000de:Y=de,U=0,V=0
- [ 3.064694@3] 0x000000df:Y=df,U=0,V=0
- [ 3.068312@3] 0x000000e0:Y=e0,U=0,V=0
- [ 3.071938@3] 0x000000e1:Y=e1,U=0,V=0
- [ 3.075557@3] 0x000000e2:Y=e2,U=0,V=0
- [ 3.079179@3] 0x000000e3:Y=e3,U=0,V=0
- [ 3.082805@3] 0x000000f0:Y=f0,U=0,V=0
- [ 3.086426@3] 0x000000f1:Y=f1,U=0,V=0
- [ 3.090046@3] 0x000000f2:Y=f2,U=0,V=0
- [ 3.093678@3] 0x000000f3:Y=f3,U=0,V=0
- [ 3.097291@3] 0x000000f4:Y=f4,U=0,V=0
- [ 3.100914@3] 0x000000f5:Y=f5,U=0,V=0
- [ 3.104541@3] 0x000000f6:Y=f6,U=0,V=0
- [ 3.108161@3] 0x000000f7:Y=f7,U=0,V=0
- [ 3.111781@3] 0x000000f8:Y=f8,U=0,V=0
- [ 3.115408@3] 0x000000f9:Y=f9,U=0,V=0
- [ 3.119026@3] 0x000000fa:Y=fa,U=0,V=0
- [ 3.122653@3] 0x000000fb:Y=fb,U=0,V=0
- [ 3.126272@3] 0x000000fc:Y=fc,U=0,V=0
- [ 3.130499@3] efusekeynum: 4
- [ 3.132784@3] efusekeyname: mac offset: 0 size: 6
- [ 3.139127@3] efusekeyname: mac_bt offset: 6 size: 6
- [ 3.145527@3] efusekeyname: mac_wifi offset: 12 size: 6
- [ 3.151907@3] efusekeyname: usid offset: 18 size: 16
- [ 3.158618@3] efuse efuse.9: probe OK!
- [ 3.162448@3] key unify config unifykey-num is 14
- [ 3.166685@3] key unify fact unifykey-num is 14
- [ 3.171137@3] aml_unifykeys_probe:1280=============unifykey_devno:eb00000
- [ 3.178213@3] 6unifykey: device unifykeys created ok
- [ 3.183048@3] 6aml_unifykeys_init done!
- [ 3.186735@3] PPMGRDRV: warn: ppmgr module init func called
- [ 3.192432@3] PPMGRDRV: err: ppmgr_driver_probe called
- [ 3.197344@3] ppmgr has 1 memory regions
- [ 3.201258@3] PPMGRDRV: info: ppmgr_dev major:234
- [ 3.206237@3] PPMGRDRV: info: ppmgr_probe done
- [ 3.210749@3] amlogic rfkill init
- [ 3.213715@3] enter bt_probe of_node
- [ 3.217110@3] not get gpio_en
- [ 3.220026@3] power on valid level is high
- [ 3.223923@3] bt: power_on_pin_OD = 0;
- [ 3.642080@1] audio_dsp: [dsp]register dsp to char divece(257)
- [ 3.643097@3] amaudio: amaudio: driver amaudio succuess!
- [ 3.648260@3] [RX]-hdmirx: hdmirx_init.
- [ 3.651338@3] ESM HLD: Initializing...
- [ 3.655072@3] ESM HLD: Registering device range 'esm_rx'...
- [ 3.660590@3] ESM HLD: Device range 'esm_rx' has been registered.
- [ 3.666614@3] ESM HLD: Creating class /sys/class/elliptic_rx...
- [ 3.672614@3] ESM HLD: The class /sys/class/elliptic_rx has been created.
- [ 3.679194@3] ESM HLD: Creating device 'esm_rx'...
- [ 3.684174@3] ESM HLD: Device 'esm_rx' has been created.
- [ 3.689199@3] ESM HLD: Done initializing the HLD driver.
- [ 3.694477@3] module init
- [ 3.697242@3]
- [ 3.697242@3] VECM probe start
- [ 3.702182@3] aml_vecm_probe: ok
- [ 3.705387@3] storage 1, boot 1
- [ 3.708089@3] get_storage_dev return 1
- [ 3.711803@3] aml_nand d0074800.nand: do not init nand
- [ 3.717654@3] saradc c1108680.saradc: initialized by kernel, clk_div=20
- [ 3.723478@3] saradc c1108680.saradc: calibration start:
- [ 3.728799@3] saradc c1108680.saradc: nominal=0, value=4
- [ 3.734068@3] saradc c1108680.saradc: nominal=256, value=253
- [ 3.739665@3] saradc c1108680.saradc: nominal=512, value=502
- [ 3.745279@3] saradc c1108680.saradc: nominal=768, value=755
- [ 3.750876@3] saradc c1108680.saradc: nominal=1023, value=1004
- [ 3.756568@3] saradc c1108680.saradc: calibration end: coef=4177
- [ 3.763044@3] gpio-key gpio_keypad.49: gpio_key: 0 name(power) pin()
- [ 3.768812@3] gpio-key gpio_keypad.49: amlogic_gpio_name_map_num pin 0!::
- [ 3.775576@3] gpio-key gpio_keypad.49: gpio_key: 0 power(147)
- [ 3.781276@3] gpio-key gpio_keypad.49: start setup_timer
- [ 3.786504@3] gpio-key gpio_keypad.49: power key(116) registed.
- [ 3.792621@3] input: gpio_keypad as /devices/gpio_keypad.49/input/input0
- [ 3.799224@3] gpio-key gpio_keypad.49: gpio keypad register input device completed.
- [ 3.806635@3] input input0: gpio keypad major:231
- [ 3.811655@3] cpuinfo: probe done
- [ 3.815595@3] input: cec_input as /devices/virtual/input/input1
- [ 3.820689@3] cectx aocec: aml_cec_probe(): no hdmirx reg resource
- [ 3.826534@3] cectx aocec: aml_cec_probe(): no hhi reg resource
- [ 3.832490@3] cectx aocec: aml_cec_probe(): can't find hdmirx
- [ 3.839215@3] cec: wake up flag:0
- [ 3.843179@3] aml_codec_T9015 c8832000.t9015: aml_T9015_audio_codec_probe
- [ 3.850090@3] aml-i2s-dai I2S.41: I2S Mic is in platform!
- [ 3.853903@3] aml_pcm_dai: pcm mode detection =1
- [ 3.881846@3] input input0: key 116 up
- [ 4.062052@3] aml_snd_card: headphone detection disable=1
- [ 4.062756@3] aml_snd_m8_card aml_m8_snd.48: T9015-audio-hifi <-> I2S.41 mapping ok
- [ 4.069870@3] aml_snd_m8_card aml_m8_snd.48: dit-hifi <-> SPDIF.42 mapping ok
- [ 4.076633@3] aml_pcm: enter aml_pcm_new dai->name: PCM.43 dai->id: 0
- [ 4.083031@3] aml_snd_m8_card aml_m8_snd.48: pcm2bt-pcm <-> PCM.43 mapping ok
- [ 4.089957@3] aml_snd_m8_card aml_m8_snd.48: ASoC: no source widget found for LOUTL
- [ 4.097545@3] aml_snd_m8_card aml_m8_snd.48: ASoC: Failed to add route LOUTL -> direct -> Ext Spk
- [ 4.106337@3] aml_snd_m8_card aml_m8_snd.48: ASoC: no source widget found for LOUTR
- [ 4.113920@3] aml_snd_m8_card aml_m8_snd.48: ASoC: Failed to add route LOUTR -> direct -> Ext Spk
- [ 4.124831@3] TCP: cubic registered
- [ 4.126946@3] NET: Registered protocol family 10
- [ 4.131488@3] NET: Registered protocol family 17
- [ 4.135418@3] Key type dns_resolver registered
- [ 4.140691@3] Registering SWP/SWPB emulation handler
- [ 4.145349@3] regulator-dummy: disabling
- [ 4.851775@3] aml_snd_card: audio use jtag pinmux as i2s output, read val =0
- [ 4.859157@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 4.864772@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
- [ 4.873118@0] xhci-hcd xhci-hcd.0.auto: irq 62, io mem 0xc9000000
- [ 4.878625@0] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 4.885488@0] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 4.892746@0] usb usb1: Product: xHCI Host Controller
- [ 4.897736@0] usb usb1: Manufacturer: Linux 3.14.29 xhci-hcd
- [ 4.903389@0] usb usb1: SerialNumber: xhci-hcd.0.auto
- [ 4.909019@3] hub 1-0:1.0: USB hub found
- [ 4.912295@3] hub 1-0:1.0: 2 ports detected
- [ 4.916543@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 4.922012@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
- [ 4.929838@3] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
- [ 4.936650@3] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 4.943976@3] usb usb2: Product: xHCI Host Controller
- [ 4.948969@3] usb usb2: Manufacturer: Linux 3.14.29 xhci-hcd
- [ 4.954582@3] usb usb2: SerialNumber: xhci-hcd.0.auto
- [ 4.960191@3] hub 2-0:1.0: USB hub found
- [ 4.963517@3] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
- [ 4.971324@1] console [netcon0] enabled
- [ 4.974544@1] netconsole: network logging started
- [ 4.979216@1] aml_vrtc rtc.33: setting system clock to 2015-01-01 00:00:12 UTC (1420070412)
- [ 4.988531@1] cpufreq-scpi cpufreq-meson.7: enter cpufreq
- [ 4.992915@1] cpufreq-scpi cpufreq-meson.7: probe cpufreq okay
- [ 5.001017@1] gxbb_pm: enter meson_pm_probe!
- [ 5.003040@1] gxbb_pm: meson_pm_probe done
- [ 5.007821@1] cpucore_cooling_register, max_cpu_core_num:4
- [ 5.030190@1] aml_istbt_dev_ready NULL
- [ 5.030255@1] ALSA device list:
- [ 5.031421@1] #0: AML-M8AUDIO
- [ 5.035088@1] Freeing unused kernel memory: 936K (ffffffc001c1c000 - ffffffc001d06000)
- [ 5.104519@2] fb: Frame buffer memory assigned at
- [ 5.104570@2] fb: 0, phy: 0x000000003d100000, vir:0xffffff8001f00000, size=24576K
- [ 5.104570@2]
- [ 5.112844@2] fb: ---------------clear fb0 memory ffffff8001f00000
- [ 5.137007@2] fb: osd[0] canvas.idx =0x40
- [ 5.137058@2] fb: osd[0] canvas.addr=0x3d100000
- [ 5.139892@2] fb: osd[0] canvas.width=7680
- [ 5.144054@2] fb: osd[0] canvas.height=3240
- [ 5.148086@2] fb: osd[0] frame.width=1920
- [ 5.152072@2] fb: osd[0] frame.height=1080
- [ 5.165577@2] fb: osd[0] canvas.idx =0x40
- [ 5.165579@2] fb: osd[0] canvas.addr=0x3d100000
- [ 5.165581@2] fb: osd[0] canvas.width=7680
- [ 5.165582@2] fb: osd[0] canvas.height=2160
- [ 5.165583@2] fb: osd[0] frame.width=1920
- [ 5.165585@2] fb: osd[0] frame.height=1080
- [ 5.203477@2] fb: Frame buffer memory assigned at
- [ 5.205738@2] fb: 1, phy: 0x000000003e900000, vir:0xffffff8003780000, size=1024K
- [ 5.205738@2]
- [ 5.214987@2] fb: fb1 open, logo index:1
- [ 5.248929@0] codec:free_alloced_keep_buffer (null). (null). (null)
- [ 5.252069@1] usb 1-1: new high-speed USB device number 2 using xhci-hcd
- [ 5.252167@0] vfm_map_store:rm default
- [ 5.252167@0]
- [ 5.252257@0] vfm_map_store:add default decoder ppmgr deinterlace amvideo
- [ 5.252257@0]
- [ 5.272360@0] fb: osd[0] enable: 1 (sh)
- [ 5.282510@0] fb: osd[1] enable: 0 (sh)
- [ 5.332243@2] Console: switching to colour frame buffer device 240x67
- [ 5.376395@2] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: d0078000, ctrl: 0
- [ 5.376410@2] dwc_otg_driver_probe host only, not probe usb_otg!!!
- [ 5.380667@2] Checking disk(s): /dev/system /dev/data
- [ 5.412984@1] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
- [ 5.412996@1] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 5.413002@1] usb 1-1: Product: USB2.0 Hub
- [ 5.442469@3] hub 1-1:1.0: USB hub found
- [ 5.442798@3] hub 1-1:1.0: 4 ports detected
- [ 5.477036@2] fsck: /dev/system: clean, 13/65536 files, 52925/262144 blocks
- [ 5.477191@2] fsck: /dev/data: Superblock last mount time is in the future.
- [ 5.477379@2] fsck: (by less than a day, probably due to the hardware clock being incorrectly set)
- [ 5.477521@2] fsck: /dev/data: Superblock last write time is in the future.
- [ 5.477703@2] fsck: (by less than a day, probably due to the hardware clock being incorrectly set)
- [ 5.477849@2] fsck: /dev/data: clean, 1436/799680 files, 102171/3195392 blocks
- [ 5.481448@0] EXT4-fs (mmcblk0p13): couldn't mount as ext3 due to feature incompatibilities
- [ 5.481894@0] EXT4-fs (mmcblk0p13): couldn't mount as ext2 due to feature incompatibilities
- [ 5.483838@0] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: (null)
- [ 5.722160@2] usb 1-1.2: new full-speed USB device number 3 using xhci-hcd
- [ 5.723369@0] EXT4-fs (mmcblk0p14): couldn't mount as ext3 due to feature incompatibilities
- [ 5.723752@0] EXT4-fs (mmcblk0p14): couldn't mount as ext2 due to feature incompatibilities
- [ 5.727494@0] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: (null)
- [ 5.825203@2] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c52b
- [ 5.825218@2] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 5.825223@2] usb 1-1.2: Product: USB Receiver
- [ 5.825228@2] usb 1-1.2: Manufacturer: Logitech
- [ 5.872481@2] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-xhci-hcd.0.auto-1.2/input2
- [ 5.935827@3] input: Logitech Unifying Device. Wireless PID:404d as /devices/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.2/1-1.2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input2
- [ 5.936566@3] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:404d] on usb-xhci-hcd.0.auto-1.2:2
- [ 6.006348@1] systemd[1]: System time before build time, advancing clock.
- [ 6.012197@3] usb 1-1.3: new high-speed USB device number 4 using xhci-hcd
- [ 6.046886@1] systemd[1]: systemd 242 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
- [ 6.047245@1] systemd[1]: Detected architecture arm64.
- [ 6.049384@1] systemd[1]: Set hostname to <CoreELEC>.
- [ 6.084906@1] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
- [ 6.084928@1] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
- [ 6.114914@3] usb 1-1.3: New USB device found, idVendor=534d, idProduct=2109
- [ 6.114928@3] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 6.114933@3] usb 1-1.3: Product: USB Video
- [ 6.114938@3] usb 1-1.3: Manufacturer: MACROSILICON
- [ 6.148438@2] hid-generic 0003:534D:2109.0005: hiddev0,hidraw2: USB HID v1.10 Device [MACROSILICON USB Video] on usb-xhci-hcd.0.auto-1.3/input4
- [ 6.199133@1] random: systemd urandom read with 61 bits of entropy available
- [ 6.199663@1] systemd[1]: Listening on Journal Socket (/dev/log).
- [ 6.200602@1] systemd[1]: Listening on Journal Socket.
- [ 6.203686@1] systemd[1]: Starting Setup NTP servers for timesyncd...
- [ 6.206231@1] systemd[1]: Starting Create Persistent Log Directory on /storage...
- [ 6.211010@1] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
- [ 6.213942@1] systemd[1]: Starting Show Version...
- [ 6.214874@1] systemd[1]: Listening on udev Control Socket.
- [ 6.217802@2] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
- [ 6.217991@1] systemd[1]: Started Early root shell on /dev/ttyS0 FOR DEBUGGING ONLY.
- [ 6.218019@2] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
- [ 6.218618@1] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 6.219015@2] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
- [ 6.221757@1] systemd[1]: Mounting POSIX Message Queue File System...
- [ 6.222406@1] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ 6.222580@1] systemd[1]: Reached target Paths.
- [ 6.225676@1] systemd[1]: Mounting Variable Directory...
- [ 6.228766@1] systemd[1]: Starting Wait For Kernel Time Synchronized...
- [ 6.235711@1] systemd[1]: Mounting Kernel Debug File System...
- [ 6.236690@1] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
- [ 6.237308@1] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
- [ 6.237963@1] systemd[1]: Listening on initctl Compatibility Named Pipe.
- [ 6.239206@1] systemd[1]: Created slice User and Session Slice.
- [ 6.239480@1] systemd[1]: Reached target Slices.
- [ 6.240197@1] systemd[1]: Listening on udev Kernel Socket.
- [ 6.241575@1] systemd[1]: Listening on RPCbind Server Activation Socket.
- [ 6.242400@1] systemd[1]: Reached target RPC Port Mapper.
- [ 6.256355@1] systemd[1]: Started Setup NTP servers for timesyncd.
- [ 6.257955@1] systemd[1]: Started Create Persistent Log Directory on /storage.
- [ 6.259487@1] systemd[1]: Started Show Version.
- [ 6.260336@1] systemd[1]: Mounted POSIX Message Queue File System.
- [ 6.261156@1] systemd[1]: Mounted Variable Directory.
- [ 6.261978@1] systemd[1]: Mounted Kernel Debug File System.
- [ 6.266455@1] systemd[1]: Starting Create kernel modules tree from overlays...
- [ 6.267158@1] systemd[1]: Condition check resulted in Persistent Log Storage being skipped.
- [ 6.295831@3] kernel-overlays-setup: setup base modules
- [ 6.331210@3] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/3.14.29
- [ 6.370988@3] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
- [ 6.371156@3] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
- [ 6.372067@3] kernel-overlays-setup: done
- [ 6.373431@1] systemd[1]: kernel-overlays.service: Succeeded.
- [ 6.374071@1] systemd[1]: Started Create kernel modules tree from overlays.
- [ 6.376863@1] systemd[1]: Starting udev Coldplug all Devices...
- [ 6.379543@1] systemd[1]: Starting Mounting swapfile...
- [ 6.514190@1] systemd[1]: Starting Load Kernel Modules...
- [ 6.517159@1] systemd[1]: Starting Create list of required static device nodes for the current kernel...
- [ 6.520248@1] systemd[1]: Starting Setup machine-id...
- [ 6.533996@1] systemd[1]: Started Create list of required static device nodes for the current kernel.
- [ 6.559810@1] systemd[1]: Started Setup machine-id.
- [ 6.563406@1] systemd[1]: Starting Create Static Device Nodes in /dev...
- [ 6.566929@1] systemd[1]: Starting Journal Service...
- [ 6.584344@2] Linux video capture interface: v2.00
- [ 6.624364@2] amlvid:err: amlvideo_init called
- [ 6.624375@2] amlvid:err: amlvideo_create_instance called
- [ 6.624387@2] amlvid:err: v4l2_dev.name=:amlvideo-000
- [ 6.624716@2] amlvideo-000: V4L2 device registered as video10
- [ 6.642675@2] Triggered SDIO WiFi power on and bus rescan.
- [ 6.642716@2] aml_wifi wifi.34: [extern_wifi_set_enable] WIFI Disable! 240
- [ 6.653166@1] systemd[1]: Started Mounting swapfile.
- [ 6.654648@1] systemd[1]: Started Create Static Device Nodes in /dev.
- [ 6.655539@1] systemd[1]: Reached target Swap.
- [ 6.658386@1] systemd[1]: Mounting Temporary Directory (/tmp)...
- [ 6.667897@1] systemd[1]: Mounted Temporary Directory (/tmp).
- [ 6.668499@1] systemd[1]: Reached target Local File Systems.
- [ 6.751781@1] systemd[1]: Started Journal Service.
- [ 6.778919@3] systemd-journald[2145]: Received request to flush runtime journal from PID 1
- [ 6.951933@2] aml_wifi wifi.34: [extern_wifi_set_enable] WIFI Enable! 240
- [ 7.263387@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
- [ 7.263423@2] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
- [ 7.263496@2] aml_sd_emmc_data_thread 2639 sdio: cmd:52
- [ 7.264587@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
- [ 7.264601@2] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
- [ 7.264622@2] aml_sd_emmc_data_thread 2639 sdio: cmd:52
- [ 7.269717@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
- [ 7.269733@2] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
- [ 7.269755@2] aml_sd_emmc_data_thread 2639 sdio: cmd:8
- [ 7.288626@2] sdio: new high speed SDIO card at address 0001
- [ 7.288641@2] sdio: clock 50000000, 4-bit-bus-width
- [ 7.288641@2]
- [ 7.289444@2] [sdio_reinit] finish
- [ 7.337815@1] wireguard: WireGuard 1.0.20200908 loaded. See www.wireguard.com for information.
- [ 7.337835@1] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
- [ 7.613555@1] random: nonblocking pool is initialized
- [ 8.697137@0] Console: switching to colour dummy device 80x25
- [ 9.516819@2] mali-utgard d00c0000.mali: max pp is 3
- [ 9.516838@2] mali-utgard d00c0000.mali: set min pp to default 1
- [ 9.516843@2] mali-utgard d00c0000.mali: min pp is 1
- [ 9.516848@2] mali-utgard d00c0000.mali: set min clk default to 0
- [ 9.516852@2] mali-utgard d00c0000.mali: min clk is 0
- [ 9.516912@2] mali-utgard d00c0000.mali: hiu io source 0xffffff80005fe000
- [ 9.516924@2] mali-utgard d00c0000.mali: hiu io source 0xffffff800084e000
- [ 9.516931@2] mali-utgard d00c0000.mali: num of pp used most of time 3
- [ 9.516935@2] mali-utgard d00c0000.mali: clock dvfs cfg table size is 7
- [ 9.517004@2] mali-utgard d00c0000.mali: max clk set 5
- [ 9.517009@2] mali-utgard d00c0000.mali: max clk is 5
- [ 9.517014@2] mali-utgard d00c0000.mali: turbo clk set to 6
- [ 9.517018@2] mali-utgard d00c0000.mali: turbo clk is 6
- [ 9.517023@2] mali-utgard d00c0000.mali: default clk is 3
- [ 9.517031@2] mali-utgard d00c0000.mali: ====================0====================
- [ 9.517031@2] clk_freq= 125000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<30 250>, clk_sample=125
- [ 9.517040@2] mali-utgard d00c0000.mali: ====================1====================
- [ 9.517040@2] clk_freq= 285000000, clk_parent=fclk_div7, voltage=1150, keep_count=5, threshod=<100 250>, clk_sample=285
- [ 9.517049@2] mali-utgard d00c0000.mali: ====================2====================
- [ 9.517049@2] clk_freq= 400000000, clk_parent=fclk_div5, voltage=1150, keep_count=3, threshod=<168 250>, clk_sample=400
- [ 9.517057@2] mali-utgard d00c0000.mali: ====================3====================
- [ 9.517057@2] clk_freq= 500000000, clk_parent=fclk_div4, voltage=1150, keep_count=2, threshod=<190 250>, clk_sample=500
- [ 9.517066@2] mali-utgard d00c0000.mali: ====================4====================
- [ 9.517066@2] clk_freq= 666000000, clk_parent=fclk_div3, voltage=1150, keep_count=1, threshod=<177 250>, clk_sample=666
- [ 9.517074@2] mali-utgard d00c0000.mali: ====================5====================
- [ 9.517074@2] clk_freq= 744000000, clk_parent= gp0_pll, voltage=1150, keep_count=1, threshod=<213 255>, clk_sample=744
- [ 9.517083@2] mali-utgard d00c0000.mali: ====================6====================
- [ 9.517083@2] clk_freq= 744000000, clk_parent= gp0_pll, voltage=1150, keep_count=1, threshod=<213 255>, clk_sample=744
- [ 9.517089@2] mali-utgard d00c0000.mali: clock dvfs table size is 7
- [ 9.519495@2] gpu cooling register okay with err=0
- [ 9.519627@2] gpu core cooling register okay with err=0
- [ 9.519964@2] Mali: Mali device driver loaded
- [ 9.966798@0] uvcvideo: Found UVC 1.00 device USB Video (534d:2109)
- [ 9.975669@2] usbcore: registered new interface driver uvcvideo
- [ 9.975682@2] USB Video Class driver (1.1.1)
- [ 10.061624@0] cfg80211: Calling CRDA to update world regulatory domain
- [ 10.116142@3] usbcore: registered new interface driver snd-usb-audio
- [ 11.111211@2] read_mac_from_nand: ret = -22 print_buff=
- [ 11.114462@0] efuse_get_mac: 00:00:00:00:00:00
- [ 11.114481@0] stmmac_open: generate MAC from CPU serial number
- [ 11.114486@0] stmmac_open: generated MAC address: 7a:ee:27:83:13:98
- [ 11.167472@3] ######platform_wifi_power_on:
- [ 11.167517@3] aml_wifi wifi.34: [extern_wifi_set_enable] WIFI Disable! 240
- [ 11.192951@0] libphy: set driving length c
- [ 11.193051@0] libphy: set PLL minimum jitter
- [ 11.272973@0] libphy: set driving length c
- [ 11.273071@0] libphy: set PLL minimum jitter
- [ 11.405487@3] 8021q: 802.1Q VLAN Support v1.8
- [ 11.671933@3] aml_wifi wifi.34: [extern_wifi_set_enable] WIFI Enable! 240
- [ 12.181893@3] sdio_reset_comm():
- [ 12.181943@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
- [ 12.181950@2] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
- [ 12.181973@2] aml_sd_emmc_data_thread 2639 sdio: cmd:52
- [ 12.182007@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
- [ 12.182011@2] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
- [ 12.182022@2] aml_sd_emmc_data_thread 2639 sdio: cmd:52
- [ 12.206780@1] [sdio_reinit] finish
- [ 12.308912@1] BT_RADIO going: on
- [ 12.308930@1] BCM_BT: going ON
- [ 12.779160@0] meson_uart c11084c0.serial: ttyS1 use xtal(8M) 24000000 change 0 to 9600
- [ 12.779276@0] meson_uart c11084c0.serial: ttyS1 use xtal(8M) 24000000 change 9600 to 115200
- [ 12.779477@0] meson_uart c11084c0.serial: ttyS1 use xtal(8M) 24000000 change 115200 to 115200
- [ 12.854564@0] Bluetooth: Core ver 2.18
- [ 12.856633@0] NET: Registered protocol family 31
- [ 12.856651@0] Bluetooth: HCI device and connection manager initialized
- [ 12.856691@0] Bluetooth: HCI socket layer initialized
- [ 12.856706@0] Bluetooth: L2CAP socket layer initialized
- [ 13.328163@2] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 13.338879@0] Bluetooth: SCO socket layer initialized
- [ 13.375851@0] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 13.375870@0] Bluetooth: BNEP filters: protocol multicast
- [ 13.375914@0] Bluetooth: BNEP socket layer initialized
- [ 13.380891@3] Registered IR keymap rc-empty
- [ 13.393891@1] input: meson-ir as /devices/c8100580.meson-ir/rc/rc0/input3
- [ 13.394722@1] rc0: meson-ir as /devices/c8100580.meson-ir/rc/rc0
- [ 13.418071@0] IR RC6 protocol handler initialized
- [ 13.419724@1] IR NEC protocol handler initialized
- [ 13.420357@3] IR Sony protocol handler initialized
- [ 13.422243@1] IR SANYO protocol handler initialized
- [ 13.422965@1] IR RC5(x) protocol handler initialized
- [ 13.423760@0] IR JVC protocol handler initialized
- [ 13.423857@1] meson-ir c8100580.meson-ir: receiver initialized
- [ 13.425783@0] input: MCE IR Keyboard/Mouse (meson-ir) as /devices/virtual/input/input4
- [ 13.426026@0] meson_uart c11084c0.serial: ttyS1 use xtal(8M) 24000000 change 115200 to 2000000
- [ 13.426088@0] meson_uart c11084c0.serial: ttyS1 use xtal(8M) 24000000 change 2000000 to 2000000
- [ 13.427924@0] IR MCE Keyboard/mouse protocol handler initialized
- [ 13.437464@3] lirc_dev: IR Remote Control driver registered, major 229
- [ 13.446137@0] rc rc0: lirc_dev: driver ir-lirc-codec (meson-ir) registered at minor = 0
- [ 13.446163@0] IR LIRC bridge handler initialized
- [ 13.507563@2] Mode smpte50hz420 (VIC 357) needs 594MHz clock, at 444,8-bit - more than 300MHz
- [ 13.507576@2] Mode smpte60hz420 (VIC 358) needs 594MHz clock, at 444,8-bit - more than 300MHz<6>[ 13.540419@2] input: VNCServer SimKey as /devices/virtual/input/input5
- [ 13.755281@1] Mode smpte50hz420 (VIC 357) needs 594MHz clock, at 444,8-bit - more than 300MHz
- [ 13.755294@1] Mode smpte60hz420 (VIC 358) needs 594MHz clock, at 444,8-bit - more than 300MHz<6>[ 13.881449@0] Bluetooth: HCI UART driver ver 2.2
- [ 13.881465@0] Bluetooth: HCI H4 protocol initialized
- [ 13.881469@0] Bluetooth: HCI BCSP protocol initialized
- [ 13.881472@0] Bluetooth: HCILL protocol initialized
- [ 13.881476@0] Bluetooth: HCIATH3K protocol initialized
- [ 13.881479@0] Bluetooth: HCI Three-wire UART (H5) protocol initialized
- [ 14.080767@0] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 14.344656@2] compat_ioctl32: unknown ioctl 'V', dir=3, #26 (0xc050561a)
- [ 14.854761@2] codec:vdec_create instance ffffff80041e2000, total 1
- [ 15.256688@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
- [ 15.256762@0] aml_spdif_dai: share the same clock
- [ 15.256772@0] aml_audio_hw: IEC958 PCM32
- [ 15.256778@0] hdmitx: audio: aout notify rate 44100
- [ 15.256782@0] hdmitx: audio: aout notify size 32
- [ 15.256786@0] hdmitx: audio: aout notify format CT_PCM
- [ 15.256791@0] hdmtix: set audio
- [ 15.256806@0] hdmitx tx_aud_src = 0
- [ 15.256833@0] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
- [ 15.256838@0] hdmitx aud_n_para = 6272
- [ 15.256862@0] hdmitx set channel status
- [ 15.256921@0] hdmitx: audio: Audio Type: PCM
- [ 15.256926@0] hdmitx: audio: set audio param
- [ 15.256938@0] aml_snd_m8_card aml_m8_snd.48: i2s/958 same source
- [ 15.257363@1] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
- [ 15.257374@1] aml_spdif_dai: share the same clock
- [ 15.257383@1] aml_audio_hw: IEC958 PCM32
- [ 15.257387@1] hdmitx: audio: aout notify rate 44100
- [ 15.257391@1] hdmitx: audio: aout notify size 32
- [ 15.257394@1] hdmitx: audio: no update
- [ 15.257404@1] aml_snd_m8_card aml_m8_snd.48: i2s/958 same source
- [ 15.257540@1] channel count should be 8, we got 2 aborting
- [ 15.349411@0] Mode smpte50hz420 (VIC 357) needs 594MHz clock, at 444,8-bit - more than 300MHz
- [ 15.349425@0] Mode smpte60hz420 (VIC 358) needs 594MHz clock, at 444,8-bit - more than 300MHz<6>[ 15.378743@0] vout_serve: vmode set to null
- [ 15.378791@0] hdmitx: video: vinfo: 1080p60hz 60 1
- [ 15.378798@0] hdmitx: video: vinfo recalc: 1080p60hz 60 1
- [ 15.378803@0] fb: osd current vmode=1080p60hz, cmd: 0x50000
- [ 15.378811@0] tv_vout: tv_set_current_vmode[930]fps_target_mode=88
- [ 15.378816@0] tv_vout: mode is 88,sync_duration_den=1,sync_duration_num=60
- [ 15.378831@0] tv_vout: 3tvinfo 87 not find
- [ 15.378835@0] tv_vout: new mode =null set ok
- [ 15.378839@0] vout_serve: vinfo mode is: null
- [ 15.378843@0] vout_serve: new mode null set ok
- [ 15.378855@0] hdmitx: edid: not find mapped vic
- [ 15.378864@0] hdmitx: video: auto - get current mode: null vmode_e 88
- [ 15.378869@0] hdmitx: stream colourdepth was 8 in para 0x01d72c48 (1920x1080p60hz)
- [ 15.378874@0] hdmitx: update physcial size: 1660 930
- [ 15.378878@0] hdmitx: video: null not valid hdmi mode
- [ 15.378906@0] fb: osd current vmode=null, cmd: 0x10000
- [ 15.383669@0] hdmitx: set frac_rate_policy as 0
- [ 15.383701@0] vout_serve: vmode set to 1080p60hz
- [ 15.383731@0] vout_serve: disable HDMI PHY as soon as possible
- [ 15.383737@0] hdmitx: video: vinfo: null 60 1
- [ 15.383743@0] hdmitx: video: vinfo recalc: null 60 1
- [ 15.383747@0] fb: osd current vmode=null, cmd: 0x50000
- [ 15.383754@0] tv_vout: tv_set_current_vmode[930]fps_target_mode=19
- [ 15.383759@0] tv_vout: mode is 19,sync_duration_den=1,sync_duration_num=60
- [ 15.383774@0] tv_vout: TV mode 1080p60hz selected.
- [ 15.383779@0]
- [ 15.383779@0] vdac_enable: on:0,module_sel:8
- [ 15.383791@0]
- [ 15.383791@0] vdac_enable: on:0,module_sel:8
- [ 15.383800@0] tv_vout: new mode =1080p60hz set ok
- [ 15.383804@0] vout_serve: vinfo mode is: 1080p60hz
- [ 15.383808@0] vout_serve: new mode 1080p60hz set ok
- [ 15.383827@0] hdmitx: video: auto - get current mode: 1080p60hz vmode_e 19
- [ 15.383831@0] hdmitx: stream colourdepth was 8 in para 0x01d70de8 (invalid)
- [ 15.383835@0] hdmitx: update rx hdr info 5
- [ 15.383839@0] hdmitx: update physcial size: 1660 930
- [ 15.383853@0] hdmitx: hdev->para now = para at 0x01d72c48
- [ 15.383859@0] hdmitx: Stream colourdepth is 8 in para 0x01d72c48 (1920x1080p60hz - VIC: 16)
- [ 15.383889@0] hdmitx: video: vinfo: 1080p60hz 60 1
- [ 15.383893@0] hdmitx: video: vinfo recalc: 1080p60hz 60 1
- [ 15.383901@0] hdmitx: system: already init VIC = 0 Now VIC = 16
- [ 15.383906@0] hdmitx: system: params found at 0x01d6f628
- [ 15.383910@0] hdmitx: system: cur_param = param at 0x01d6f628 colourdepth 8 colourspace 0
- [ 15.383917@0] hdmitx: video: pixel freq 148500, tmds clock 148500, MaxClock1 300000, HF_IEEEOUI 0x000000, MaxClock2 0
- [ 15.383922@0] hdmitx: rx no SCDC present indicator
- [ 15.385935@0] hdmirx version is 2.0
- [ 15.385939@0] hdmitx div40: 0
- [ 15.411849@0] hdmitx: system: set pll
- [ 15.411864@0] hdmitx: system: param->VIC:16
- [ 15.411873@0] hdmitx: set clk: VIC = 16 cd = 4 cs = 2 frac_rate = 0
- [ 15.411880@0] config HPLL = 2970000
- [ 15.411902@0] HPLL: 0xc000027b
- [ 15.411905@0] config HPLL done
- [ 15.411914@0] set_hpll_od3_clk_div[820] div = 6
- [ 15.411923@0] j = 4 vid_clk_div = 1
- [ 15.411933@0] hdmitx: set enc for VIC: 16
- [ 15.411953@0] hdmitx_set_hw[5067] set VIC = 16
- [ 15.412052@0] Set rgb_ycc to 2
- [ 15.412190@0] hdmitx: system: irq 80000001
- [ 15.428898@0] Start = 0x10000100 End = 0x100001ff
- [ 15.428918@0] [0x10000104]: 0x00000001
- [ 15.429086@0] [0x10000180]: 0x000000ff
- [ 15.429091@0] [0x10000181]: 0x000000ff
- [ 15.429096@0] [0x10000182]: 0x00000003
- [ 15.429100@0] [0x10000183]: 0x00000007
- [ 15.429105@0] [0x10000184]: 0x0000003f
- [ 15.429109@0] [0x10000185]: 0x00000002
- [ 15.429115@0] [0x10000187]: 0x000000ff
- [ 15.429120@0] [0x10000188]: 0x00000003
- [ 15.543890@0] hdmitx: system: PHY Setting Done
- [ 15.547932@0] Sink is HDMI device
- [ 15.547951@0] hdmitx: system: packet: can't get vendor data
- [ 15.547961@0] hdmtix: set audio
- [ 15.547979@0] hdmitx tx_aud_src = 0
- [ 15.548022@0] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
- [ 15.548030@0] hdmitx aud_n_para = 6272
- [ 15.548060@0] hdmitx set channel status
- [ 15.548144@0] hdmitx: audio: Audio Type: PCM
- [ 15.548159@0] hdmitx: video: VIC: 16 (16) 1920x1080p60hz
- [ 15.548177@0] hdmitx: video: Bit depth: 8-bit, Colour range RGB: limited, YCC: limited, Colourspace: YUV444
- [ 15.548188@0] hdmitx: video: Colorimetry: bt709
- [ 15.548199@0] hdmitx: video: PLL clock: 0xc000027b, Vid clock div 0x000a339c
- [ 15.548211@0] fb: osd current vmode=1080p60hz, cmd: 0x10000
- [ 15.781868@0] vout_serve: vmode set to null
- [ 15.781923@0] vout_serve: disable HDMI PHY as soon as possible
- [ 15.781931@0] hdmitx: video: vinfo: 1080p60hz 60 1
- [ 15.781938@0] hdmitx: video: vinfo recalc: 1080p60hz 60 1
- [ 15.781942@0] fb: osd current vmode=1080p60hz, cmd: 0x50000
- [ 15.781951@0] tv_vout: tv_set_current_vmode[930]fps_target_mode=88
- [ 15.781956@0] tv_vout: mode is 88,sync_duration_den=1,sync_duration_num=60
- [ 15.781971@0] tv_vout: 3tvinfo 87 not find
- [ 15.781975@0] tv_vout: new mode =null set ok
- [ 15.781979@0] vout_serve: vinfo mode is: null
- [ 15.781982@0] vout_serve: new mode null set ok
- [ 15.781994@0] hdmitx: edid: not find mapped vic
- [ 15.782003@0] hdmitx: video: auto - get current mode: null vmode_e 88
- [ 15.782008@0] hdmitx: stream colourdepth was 8 in para 0x01d72c48 (1920x1080p60hz)
- [ 15.782013@0] hdmitx: display colourdepth was 8 in cur_param 0x01d6f628 (VIC: 16)
- [ 15.782017@0] hdmitx: update physcial size: 1660 930
- [ 15.782021@0] hdmitx: video: null not valid hdmi mode
- [ 15.782050@0] fb: osd current vmode=null, cmd: 0x10000
- [ 15.795127@0] hdmitx: set frac_rate_policy as 0
- [ 15.795158@0] vout_serve: vmode set to 1080p60hz
- [ 15.795186@0] vout_serve: disable HDMI PHY as soon as possible
- [ 15.795192@0] hdmitx: video: vinfo: null 60 1
- [ 15.795198@0] hdmitx: video: vinfo recalc: null 60 1
- [ 15.795203@0] fb: osd current vmode=null, cmd: 0x50000
- [ 15.795209@0] tv_vout: tv_set_current_vmode[930]fps_target_mode=19
- [ 15.795214@0] tv_vout: mode is 19,sync_duration_den=1,sync_duration_num=60
- [ 15.795227@0] tv_vout: TV mode 1080p60hz selected.
- [ 15.795233@0]
- [ 15.795233@0] vdac_enable: on:0,module_sel:8
- [ 15.795244@0]
- [ 15.795244@0] vdac_enable: on:0,module_sel:8
- [ 15.795254@0] tv_vout: new mode =1080p60hz set ok
- [ 15.795257@0] vout_serve: vinfo mode is: 1080p60hz
- [ 15.795261@0] vout_serve: new mode 1080p60hz set ok
- [ 15.795279@0] hdmitx: video: auto - get current mode: 1080p60hz vmode_e 19
- [ 15.795284@0] hdmitx: stream colourdepth was 8 in para 0x01d70de8 (invalid)
- [ 15.795288@0] hdmitx: display colourdepth was 8 in cur_param 0x01d6f628 (VIC: 16)
- [ 15.795292@0] hdmitx: update rx hdr info 5
- [ 15.795295@0] hdmitx: update physcial size: 1660 930
- [ 15.795310@0] hdmitx: hdev->para now = para at 0x01d72c48
- [ 15.795315@0] hdmitx: display colourdepth is 10 in cur_param 0x01d6f628 (VIC: 16)
- [ 15.795320@0] hdmitx: Stream colourdepth is 8 in para 0x01d72c48 (1920x1080p60hz - VIC: 16)
- [ 15.795349@0] hdmitx: video: vinfo: 1080p60hz 60 1
- [ 15.795353@0] hdmitx: video: vinfo recalc: 1080p60hz 60 1
- [ 15.795360@0] hdmitx: system: already init VIC = 0 Now VIC = 16
- [ 15.795365@0] hdmitx: system: params found at 0x01d6f628
- [ 15.795369@0] hdmitx: system: cur_param = param at 0x01d6f628 colourdepth 10 colourspace 2
- [ 15.795376@0] hdmitx: video: pixel freq 148500, tmds clock 185625, MaxClock1 300000, HF_IEEEOUI 0x000000, MaxClock2 0
- [ 15.795381@0] hdmitx: rx no SCDC present indicator
- [ 15.797394@0] hdmirx version is 2.0
- [ 15.797398@0] hdmitx div40: 0
- [ 15.821848@0] hdmitx: system: set pll
- [ 15.821867@0] hdmitx: system: param->VIC:16
- [ 15.821878@0] hdmitx: set clk: VIC = 16 cd = 5 cs = 2 frac_rate = 0
- [ 15.821885@0] config HPLL = 3712500
- [ 15.821905@0] HPLL: 0xc000029a
- [ 15.821908@0] config HPLL done
- [ 15.822919@0] set_hpll_od3_clk_div[820] div = 8
- [ 15.822927@0] j = 4 vid_clk_div = 1
- [ 15.822937@0] hdmitx: set enc for VIC: 16
- [ 15.822956@0] hdmitx_set_hw[5067] set VIC = 16
- [ 15.823034@0] Set rgb_ycc to 2
- [ 15.823171@0] hdmitx: system: irq 80000001
- [ 15.839897@0] Start = 0x10000100 End = 0x100001ff
- [ 15.839915@0] [0x10000104]: 0x00000001
- [ 15.840084@0] [0x10000180]: 0x000000ff
- [ 15.840089@0] [0x10000181]: 0x000000ff
- [ 15.840093@0] [0x10000182]: 0x00000003
- [ 15.840098@0] [0x10000183]: 0x00000007
- [ 15.840103@0] [0x10000184]: 0x0000003f
- [ 15.840108@0] [0x10000185]: 0x00000002
- [ 15.840114@0] [0x10000187]: 0x000000ff
- [ 15.840118@0] [0x10000188]: 0x00000003
- [ 15.953849@0] hdmitx: system: PHY Setting Done
- [ 15.957883@0] Sink is HDMI device
- [ 15.957898@0] hdmitx: system: packet: can't get vendor data
- [ 15.957905@0] hdmtix: set audio
- [ 15.957919@0] hdmitx tx_aud_src = 0
- [ 15.957951@0] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
- [ 15.957958@0] hdmitx aud_n_para = 6272
- [ 15.957980@0] hdmitx set channel status
- [ 15.958047@0] hdmitx: audio: Audio Type: PCM
- [ 15.958060@0] hdmitx: video: VIC: 16 (16) 1920x1080p60hz
- [ 15.958073@0] hdmitx: video: Bit depth: 10-bit, Colour range RGB: limited, YCC: limited, Colourspace: YUV444
- [ 15.958082@0] hdmitx: video: Colorimetry: bt709
- [ 15.958090@0] hdmitx: video: PLL clock: 0xc000029a, Vid clock div 0x000b0000
- [ 15.958099@0] fb: osd current vmode=1080p60hz, cmd: 0x10000
- [ 31.654819@3] compat_ioctl32: unknown ioctl 'V', dir=3, #26 (0xc050561a)
- [ 31.656786@3] compat_ioctl32: unknown ioctl 'V', dir=3, #26 (0xc050561a)
- [ 31.658090@3] compat_ioctl32: unknown ioctl 'V', dir=3, #25 (0xc0485619)
Add Comment
Please, Sign In to add comment