daily pastebin goal
17%
SHARE
TWEET

Untitled

a guest Feb 26th, 2019 56 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [    0.000000] Booting Linux on physical CPU 0x500
  2. [    0.000000] Initializing cgroup subsys cpuset
  3. [    0.000000] Initializing cgroup subsys cpu
  4. [    0.000000] Initializing cgroup subsys cpuacct
  5. [    0.000000] Linux version 4.4.132+ (linaro@tinkerboard) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Fri Feb 8 15:37:42 UTC 2019
  6. [    0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
  7. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  8. [    0.000000] Machine model:
  9. [    0.000000] cma: Reserved 16 MiB at 0x7f000000
  10. [    0.000000] Memory policy: Data cache writealloc
  11. [    0.000000] On node 0 totalpages: 524288
  12. [    0.000000] free_area_init_node: node 0, pgdat c13e5480, node_mem_map eeffa000
  13. [    0.000000]   Normal zone: 1536 pages used for memmap
  14. [    0.000000]   Normal zone: 0 pages reserved
  15. [    0.000000]   Normal zone: 196608 pages, LIFO batch:31
  16. [    0.000000]   HighMem zone: 327680 pages, LIFO batch:31
  17. [    0.000000] PERCPU: Embedded 14 pages/cpu @eef7c000 s24792 r8192 d24360 u57344
  18. [    0.000000] pcpu-alloc: s24792 r8192 d24360 u57344 alloc=14*4096
  19. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  20. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522752
  21. [    0.000000] Kernel command line: earlyprintk quiet splash plymouth.ignore-serial-consoles console=tty1 rw init=/sbin/init uboot_version=2017.07-g8c31a11215 root=/dev/mmcblk1p2
  22. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  23. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  24. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  25. [    0.000000] Memory: 2042988K/2097152K available (12288K kernel code, 964K rwdata, 3312K rodata, 1024K init, 595K bss, 37780K reserved, 16384K cma-reserved, 1294336K highmem)
  26. [    0.000000] Virtual kernel memory layout:
  27.                    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  28.                    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
  29.                    vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
  30.                    lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
  31.                    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  32.                    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  33.                      .text : 0xc0008000 - 0xc0d00000   (13280 kB)
  34.                      .init : 0xc1200000 - 0xc1300000   (1024 kB)
  35.                      .data : 0xc1300000 - 0xc13f10bc   ( 965 kB)
  36.                       .bss : 0xc13f3000 - 0xc1487de4   ( 596 kB)
  37. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  38. [    0.000000] Hierarchical RCU implementation.
  39. [    0.000000]  Build-time adjustment of leaf fanout to 32.
  40. [    0.000000] NR_IRQS:16 nr_irqs:16 16
  41. [    0.000000] L2C: failed to init: -19
  42. [    0.000000] rockchip_clk_register_branches: unknown clock type 9
  43. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  44. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  45. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  46. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  47. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  48. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  49. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  50. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  51. [    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
  52. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  53. [    0.000009] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  54. [    0.000029] Switching to timer-based delay loop, resolution 41ns
  55. [    0.003597] Console: colour dummy device 80x30
  56. [    0.003892] console [tty1] enabled
  57. [    0.003929] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  58. [    0.003954] pid_max: default: 32768 minimum: 301
  59. [    0.004085] Security Framework initialized
  60. [    0.004103] Yama: becoming mindful.
  61. [    0.004207] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  62. [    0.004229] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  63. [    0.005302] Initializing cgroup subsys devices
  64. [    0.005333] Initializing cgroup subsys freezer
  65. [    0.005405] CPU: Testing write buffer coherency: ok
  66. [    0.005454] ftrace: allocating 43315 entries in 128 pages
  67. [    0.127020] CPU0: update cpu_capacity 430
  68. [    0.127041] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
  69. [    0.127450] Setting up static identity map for 0x100000 - 0x100058
  70. [    0.131232] CPU1: update cpu_capacity 430
  71. [    0.131242] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
  72. [    0.133260] CPU2: update cpu_capacity 430
  73. [    0.133269] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
  74. [    0.135286] CPU3: update cpu_capacity 430
  75. [    0.135296] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
  76. [    0.135430] Brought up 4 CPUs
  77. [    0.135471] SMP: Total of 4 processors activated (192.00 BogoMIPS).
  78. [    0.135481] CPU: All CPU(s) started in SVC mode.
  79. [    0.137346] devtmpfs: initialized
  80. [    0.164712] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
  81. [    0.165218] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  82. [    0.165255] futex hash table entries: 1024 (order: 4, 65536 bytes)
  83. [    0.166591] xor: measuring software checksum speed
  84. [    0.256843]    arm4regs  :  1038.000 MB/sec
  85. [    0.356939]    8regs     :   800.800 MB/sec
  86. [    0.457045]    32regs    :   799.600 MB/sec
  87. [    0.457059] xor: using function: arm4regs (1038.000 MB/sec)
  88. [    0.457101] pinctrl core: initialized pinctrl subsystem
  89. [    0.458628] NET: Registered protocol family 16
  90. [    0.460720] DMA: preallocated 256 KiB pool for atomic coherent allocations
  91. [    0.487152] cpuidle: using governor ladder
  92. [    0.517190] cpuidle: using governor menu
  93. [    0.517228] Registered FIQ tty driver
  94. [    0.551983] gpiochip_add_data: registered GPIOs 0 to 23 on device: gpio0
  95. [    0.552153] gpiochip_add_data: registered GPIOs 24 to 55 on device: gpio1
  96. [    0.552327] gpiochip_add_data: registered GPIOs 56 to 87 on device: gpio2
  97. [    0.552482] gpiochip_add_data: registered GPIOs 88 to 119 on device: gpio3
  98. [    0.552627] gpiochip_add_data: registered GPIOs 120 to 151 on device: gpio4
  99. [    0.552780] gpiochip_add_data: registered GPIOs 152 to 183 on device: gpio5
  100. [    0.552925] gpiochip_add_data: registered GPIOs 184 to 215 on device: gpio6
  101. [    0.553073] gpiochip_add_data: registered GPIOs 216 to 247 on device: gpio7
  102. [    0.553226] gpiochip_add_data: registered GPIOs 248 to 263 on device: gpio8
  103. [    0.568440] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  104. [    0.568457] hw-breakpoint: maximum watchpoint size is 4 bytes.
  105. [    0.787803] raid6: int32x1  gen()    79 MB/s
  106. [    0.958240] raid6: int32x1  xor()    69 MB/s
  107. [    1.128505] raid6: int32x2  gen()   118 MB/s
  108. [    1.298604] raid6: int32x2  xor()    88 MB/s
  109. [    1.469280] raid6: int32x4  gen()   107 MB/s
  110. [    1.639317] raid6: int32x4  xor()    77 MB/s
  111. [    1.809394] raid6: int32x8  gen()   115 MB/s
  112. [    1.979674] raid6: int32x8  xor()    89 MB/s
  113. [    1.979688] raid6: using algorithm int32x2 gen() 118 MB/s
  114. [    1.979698] raid6: .... xor() 88 MB/s, rmw enabled
  115. [    1.979708] raid6: using intx1 recovery algorithm
  116. [    1.980187] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator_3v3[0]'
  117. [    1.980648] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vsys-regulator[0]'
  118. [    1.981287] of_get_named_gpiod_flags: parsed 'gpio' property of node '/sdmmc-regulator[0]' - status (0)
  119. [    1.981647] vcc_sd: regulator get failed, ret=-517
  120. [    1.981778] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/flash-regulator[0]'
  121. [    1.982103] vcc_flash: regulator get failed, ret=-517
  122. [    1.982238] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vdd_log[0]'
  123. [    1.982897] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc-camera[0]' - status (0)
  124. [    1.983971] iommu: Adding device ff910000.isp to group 0
  125. [    1.984118] iommu: Adding device ff930000.vop to group 1
  126. [    1.984257] iommu: Adding device ff940000.vop to group 2
  127. [    1.984409] iommu: Adding device ff9a0000.video-codec to group 3
  128. [    1.984570] iommu: Adding device ff9a0000.vpu-service to group 4
  129. [    1.984725] iommu: Adding device ff9c0000.hevc-service to group 5
  130. [    1.988035] SCSI subsystem initialized
  131. [    1.988419] usbcore: registered new interface driver usbfs
  132. [    1.988515] usbcore: registered new interface driver hub
  133. [    1.988606] usbcore: registered new device driver usb
  134. [    1.988788] media: Linux media interface: v0.10
  135. [    1.988863] Linux video capture interface: v2.00
  136. [    1.989054] pps_core: LinuxPPS API ver. 1 registered
  137. [    1.989068] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  138. [    1.989110] PTP clock support registered
  139. [    1.991812] Advanced Linux Sound Architecture Driver Initialized.
  140. [    1.992797] Bluetooth: Core ver 2.21
  141. [    1.992857] NET: Registered protocol family 31
  142. [    1.992870] Bluetooth: HCI device and connection manager initialized
  143. [    1.992891] Bluetooth: HCI socket layer initialized
  144. [    1.992908] Bluetooth: L2CAP socket layer initialized
  145. [    1.992961] Bluetooth: SCO socket layer initialized
  146. [    1.994982] clocksource: Switched to clocksource arch_sys_counter
  147. [    2.075099] FS-Cache: Loaded
  148. [    2.093875] NET: Registered protocol family 2
  149. [    2.094740] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  150. [    2.094855] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
  151. [    2.095169] TCP: Hash tables configured (established 8192 bind 8192)
  152. [    2.095263] UDP hash table entries: 512 (order: 2, 24576 bytes)
  153. [    2.095328] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
  154. [    2.095648] NET: Registered protocol family 1
  155. [    2.096146] RPC: Registered named UNIX socket transport module.
  156. [    2.096162] RPC: Registered udp transport module.
  157. [    2.096173] RPC: Registered tcp transport module.
  158. [    2.096184] RPC: Registered tcp NFSv4.1 backchannel transport module.
  159. [    2.097530] hw perfevents: enabled with armv7_cortex_a12 PMU driver, 7 counters available
  160. [    2.100566] Initialise system trusted keyring
  161. [    2.115759] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  162. [    2.118412] NFS: Registering the id_resolver key type
  163. [    2.118477] Key type id_resolver registered
  164. [    2.118490] Key type id_legacy registered
  165. [    2.118526] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  166. [    2.118559] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  167. [    2.119840] FS-Cache: Netfs 'cifs' registered for caching
  168. [    2.120347] Key type cifs.spnego registered
  169. [    2.120384] Key type cifs.idmap registered
  170. [    2.120417] ntfs: driver 2.1.32 [Flags: R/W DEBUG].
  171. [    2.120885] fuse init (API version 7.23)
  172. [    2.121794] SGI XFS with ACLs, security attributes, realtime, no debug enabled
  173. [    2.131247] NET: Registered protocol family 38
  174. [    2.131294] async_tx: api initialized (async)
  175. [    2.131338] Key type asymmetric registered
  176. [    2.131359] Asymmetric key parser 'x509' registered
  177. [    2.131483] bounce: pool size: 64 pages
  178. [    2.131778] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
  179. [    2.131807] io scheduler noop registered
  180. [    2.131831] io scheduler deadline registered
  181. [    2.131887] io scheduler cfq registered (default)
  182. [    2.138646] rk-vcodec ff9a0000.vpu-service: no regulator for vcodec
  183. [    2.139038] rk-vcodec ff9a0000.vpu-service: probe device
  184. [    2.139139] rk-vcodec ff9a0000.vpu-service: vpu mmu dec eeb07e10
  185. [    2.139468] rk-vcodec ff9a0000.vpu-service: allocator is drm
  186. [    2.139564] rk-vcodec ff9a0000.vpu-service: checking hw id 4831
  187. [    2.140464] rk-vcodec ff9a0000.vpu-service: could not find power_model node
  188. [    2.140499] rk-vcodec ff9a0000.vpu-service: init success
  189. [    2.141045] rk-vcodec ff9c0000.hevc-service: no regulator for vcodec
  190. [    2.141461] rk-vcodec ff9c0000.hevc-service: probe device
  191. [    2.141571] rk-vcodec ff9c0000.hevc-service: vpu mmu dec eeb08210
  192. [    2.141869] rk-vcodec ff9c0000.hevc-service: allocator is drm
  193. [    2.141968] rk-vcodec ff9c0000.hevc-service: checking hw id 6867
  194. [    2.142616] rk-vcodec ff9c0000.hevc-service: could not find power_model node
  195. [    2.142648] rk-vcodec ff9c0000.hevc-service: init success
  196. [    2.146262] dma-pl330 ff250000.dma-controller: Loaded driver for PL330 DMAC-241330
  197. [    2.146286] dma-pl330 ff250000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  198. [    2.147480] dma-pl330 ffb20000.dma-controller: Loaded driver for PL330 DMAC-241330
  199. [    2.147504] dma-pl330 ffb20000.dma-controller:       DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
  200. [    2.148439] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
  201. [    2.151552] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 38, base_baud = 1500000) is a 16550A
  202. [    2.152934] ff190000.serial: ttyS1 at MMIO 0xff190000 (irq = 39, base_baud = 1500000) is a 16550A
  203. [    2.154148] ff1b0000.serial: ttyS3 at MMIO 0xff1b0000 (irq = 40, base_baud = 1500000) is a 16550A
  204. [    2.155584] ff1c0000.serial: ttyS4 at MMIO 0xff1c0000 (irq = 41, base_baud = 1500000) is a 16550A
  205. [    2.158204] gpiomem-rk3288 ff750000.rk3288-gpiomem: Initialised: Registers at 0xff750000
  206. [    2.158351] [drm] Initialized drm 1.1.0 20060810
  207. [    2.163393] [drm] Rockchip DRM driver version: v1.0.1
  208. [    2.164378] usbcore: registered new interface driver udl
  209. [    2.165308] mali ffa30000.gpu: Failed to get regulator
  210. [    2.165340] mali ffa30000.gpu: Power control initialization failed
  211. [    2.167120] brd: module loaded
  212. [    2.176888] loop: module loaded
  213. [    2.177990] zram: Added device: zram0
  214. [    2.178045] lkdtm: No crash points registered, enable through debugfs
  215. [    2.179722] rockchip-spi ff130000.spi: no high_speed pinctrl state
  216. [    2.182182] tun: Universal TUN/TAP device driver, 1.6
  217. [    2.182197] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  218. [    2.182501] CAN device driver interface
  219. [    2.184339] of_get_named_gpiod_flags: parsed 'wolirq-gpio' property of node '/ethernet@ff290000[0]' - status (0)
  220. [    2.184423] rk_gmac-dwmac ff290000.ethernet: phy regulator is not available yet, deferred probing
  221. [    2.185842] PPP generic driver version 2.4.2
  222. [    2.186262] usbcore: registered new interface driver rndis_wlan
  223. [    2.186594] usbcore: registered new interface driver rt2800usb
  224. [    2.186628] Rockchip WiFi SYS interface (V1.00) ...
  225. [    2.186699] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
  226. [    2.186792] usbcore: registered new interface driver pegasus
  227. [    2.186885] usbcore: registered new interface driver rtl8150
  228. [    2.186976] usbcore: registered new interface driver r8152
  229. [    2.187074] usbcore: registered new interface driver asix
  230. [    2.187164] usbcore: registered new interface driver ax88179_178a
  231. [    2.187253] usbcore: registered new interface driver cdc_ether
  232. [    2.187350] usbcore: registered new interface driver dm9601
  233. [    2.187461] usbcore: registered new interface driver smsc75xx
  234. [    2.187568] usbcore: registered new interface driver smsc95xx
  235. [    2.187659] usbcore: registered new interface driver net1080
  236. [    2.187752] usbcore: registered new interface driver rndis_host
  237. [    2.187844] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  238. [    2.187968] usbcore: registered new interface driver ipheth
  239. [    2.188088] usbcore: registered new interface driver cdc_ncm
  240. [    2.188183] usbcore: registered new interface driver cdc_mbim
  241. [    2.188594] ff540000.usb supply vusb_d not found, using dummy regulator
  242. [    2.188713] ff540000.usb supply vusb_a not found, using dummy regulator
  243. [    2.305577] dwc2 ff540000.usb: DWC OTG Controller
  244. [    2.305621] dwc2 ff540000.usb: new USB bus registered, assigned bus number 1
  245. [    2.305672] dwc2 ff540000.usb: irq 46, io mem 0xff540000
  246. [    2.306037] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  247. [    2.306058] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  248. [    2.306074] usb usb1: Product: DWC OTG Controller
  249. [    2.306089] usb usb1: Manufacturer: Linux 4.4.132+ dwc2_hsotg
  250. [    2.306103] usb usb1: SerialNumber: ff540000.usb
  251. [    2.307033] hub 1-0:1.0: USB hub found
  252. [    2.307102] hub 1-0:1.0: 1 port detected
  253. [    2.307987] ff580000.usb supply vusb_d not found, using dummy regulator
  254. [    2.308101] ff580000.usb supply vusb_a not found, using dummy regulator
  255. [    2.425072] dwc2 ff580000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM
  256. [    2.425776] dwc2 ff580000.usb: DWC OTG Controller
  257. [    2.425821] dwc2 ff580000.usb: new USB bus registered, assigned bus number 2
  258. [    2.425872] dwc2 ff580000.usb: irq 47, io mem 0xff580000
  259. [    2.426140] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  260. [    2.426161] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  261. [    2.426177] usb usb2: Product: DWC OTG Controller
  262. [    2.426191] usb usb2: Manufacturer: Linux 4.4.132+ dwc2_hsotg
  263. [    2.426206] usb usb2: SerialNumber: ff580000.usb
  264. [    2.427118] hub 2-0:1.0: USB hub found
  265. [    2.427188] hub 2-0:1.0: 1 port detected
  266. [    2.429332] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  267. [    2.429361] ehci-platform: EHCI generic platform driver
  268. [    2.429785] ehci-platform ff500000.usb: EHCI Host Controller
  269. [    2.430103] ehci-platform ff500000.usb: new USB bus registered, assigned bus number 3
  270. [    2.430336] ehci-platform ff500000.usb: irq 45, io mem 0xff500000
  271. [    2.445048] ehci-platform ff500000.usb: USB 2.0 started, EHCI 1.00
  272. [    2.445331] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  273. [    2.445353] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  274. [    2.445369] usb usb3: Product: EHCI Host Controller
  275. [    2.445384] usb usb3: Manufacturer: Linux 4.4.132+ ehci_hcd
  276. [    2.445398] usb usb3: SerialNumber: ff500000.usb
  277. [    2.446319] hub 3-0:1.0: USB hub found
  278. [    2.446388] hub 3-0:1.0: 1 port detected
  279. [    2.447387] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  280. [    2.447434] ohci-platform: OHCI generic platform driver
  281. [    2.447928] usbcore: registered new interface driver cdc_acm
  282. [    2.447942] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  283. [    2.448047] usbcore: registered new interface driver cdc_wdm
  284. [    2.448242] usbcore: registered new interface driver usb-storage
  285. [    2.448419] usbcore: registered new interface driver usbserial
  286. [    2.448499] usbcore: registered new interface driver usbserial_generic
  287. [    2.448559] usbserial: USB Serial support registered for generic
  288. [    2.448660] usbcore: registered new interface driver ch341
  289. [    2.448719] usbserial: USB Serial support registered for ch341-uart
  290. [    2.448819] usbcore: registered new interface driver cp210x
  291. [    2.448877] usbserial: USB Serial support registered for cp210x
  292. [    2.449004] usbcore: registered new interface driver ftdi_sio
  293. [    2.449072] usbserial: USB Serial support registered for FTDI USB Serial Device
  294. [    2.449304] usbcore: registered new interface driver keyspan
  295. [    2.449364] usbserial: USB Serial support registered for Keyspan - (without firmware)
  296. [    2.449421] usbserial: USB Serial support registered for Keyspan 1 port adapter
  297. [    2.449478] usbserial: USB Serial support registered for Keyspan 2 port adapter
  298. [    2.449535] usbserial: USB Serial support registered for Keyspan 4 port adapter
  299. [    2.449641] usbcore: registered new interface driver mos7840
  300. [    2.449701] usbserial: USB Serial support registered for Moschip 7840/7820 USB Serial Driver
  301. [    2.449806] usbcore: registered new interface driver option
  302. [    2.449866] usbserial: USB Serial support registered for GSM modem (1-port)
  303. [    2.450163] usbcore: registered new interface driver oti6858
  304. [    2.450231] usbserial: USB Serial support registered for oti6858
  305. [    2.450341] usbcore: registered new interface driver pl2303
  306. [    2.450402] usbserial: USB Serial support registered for pl2303
  307. [    2.450511] usbcore: registered new interface driver qcserial
  308. [    2.450572] usbserial: USB Serial support registered for Qualcomm USB modem
  309. [    2.450685] usbcore: registered new interface driver sierra
  310. [    2.450747] usbserial: USB Serial support registered for Sierra USB modem
  311. [    2.452110] usbcore: registered new interface driver iforce
  312. [    2.452245] usbcore: registered new interface driver xpad
  313. [    2.452554] usbcore: registered new interface driver usbtouchscreen
  314. [    2.453509] i2c /dev entries driver
  315. [    2.455596] rk808 0-001b: Pmic Chip id: 0x0
  316. [    2.459325] rk808 0-001b: GPIO lookup for consumer dvs
  317. [    2.459344] rk808 0-001b: using device tree for GPIO lookup
  318. [    2.459404] of_get_named_gpiod_flags: parsed 'dvs-gpios' property of node '/i2c@ff650000/pmic@1b[0]' - status (0)
  319. [    2.459638] rk808 0-001b: GPIO lookup for consumer dvs
  320. [    2.459656] rk808 0-001b: using device tree for GPIO lookup
  321. [    2.459729] of_get_named_gpiod_flags: parsed 'dvs-gpios' property of node '/i2c@ff650000/pmic@1b[1]' - status (0)
  322. [    2.459892] DCDC_REG1: supplied by vcc_sys
  323. [    2.461039] DCDC_REG2: supplied by vcc_sys
  324. [    2.461988] DCDC_REG3: supplied by vcc_sys
  325. [    2.462576] DCDC_REG4: supplied by vcc_sys
  326. [    2.463266] vcc_sd: supplied by vcc_io
  327. [    2.463363] vcc_flash: supplied by vcc_io
  328. [    2.463603] LDO_REG1: supplied by vcc_sys
  329. [    2.465138] LDO_REG2: supplied by vcc_sys
  330. [    2.466480] LDO_REG3: supplied by vcc_sys
  331. [    2.467784] LDO_REG4: supplied by vcc_io
  332. [    2.469215] LDO_REG5: supplied by vcc_io
  333. [    2.470532] LDO_REG6: supplied by vcc_io
  334. [    2.470775] vdd10_lcd: Bringing 800000uV into 1000000-1000000uV
  335. [    2.472175] LDO_REG7: supplied by vcc_sys
  336. [    2.473540] LDO_REG8: supplied by vcc_sys
  337. [    2.475041] SWITCH_REG1: supplied by vcc_io
  338. [    2.475602] SWITCH_REG2: supplied by vcc_io
  339. [    2.479837] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
  340. [    2.480382] rk3x-i2c ff650000.i2c: Initialized RK3xxx I2C bus at f08fa000
  341. [    2.481406] rk3x-i2c ff140000.i2c: Initialized RK3xxx I2C bus at f08fc000
  342. [    2.482503] tinker-mcu: tinker_mcu_probe: address = 0x45
  343. [    2.482519] tinker-mcu: send_cmds: 80
  344. [    2.482732] tinker-mcu: send_cmds: send command failed, ret = -6
  345. [    2.482760] tinker-mcu: tinker_mcu_probe: init_cmd_check failed, -6
  346. [    2.483087] tinker-ft5406: tinker_ft5406_probe: address = 0x38
  347. [    2.685027] usb 1-1: new high-speed USB device number 2 using dwc2
  348. [    2.765025] usb 3-1: new high-speed USB device number 2 using ehci-platform
  349. [    2.886573] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610
  350. [    2.886596] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  351. [    2.886612] usb 1-1: Product: USB2.0 Hub
  352. [    2.887720] hub 1-1:1.0: USB hub found
  353. [    2.888078] hub 1-1:1.0: 4 ports detected
  354. [    3.075013] tinker-ft5406: tinker_ft5406_probe: wait connected timeout
  355. [    3.075099] rk3x-i2c ff150000.i2c: Initialized RK3xxx I2C bus at f08fe000
  356. [    3.076121] rk3x-i2c ff160000.i2c: Initialized RK3xxx I2C bus at f0912000
  357. [    3.078112] at24 2-0050: 1024 byte 24c08 EEPROM, writable, 1 bytes/write
  358. [    3.078157] rk3x-i2c ff660000.i2c: Initialized RK3xxx I2C bus at f0914000
  359. [    3.079324] [jcliao] imx219_probe
  360. [    3.079676] imx219 2-0010: Reading register 100 from 10 failed
  361. [    3.079878] imx219 2-0010: Reading register 100 from 10 failed
  362. [    3.086419] imx219 2-0010: Error -5 setting default controls
  363. [    3.086473] imx219: probe of 2-0010 failed with error -5
  364. [    3.087553] lirc_dev: IR Remote Control driver registered, major 239
  365. [    3.087579] IR NEC protocol handler initialized
  366. [    3.087599] IR RC5(x/sz) protocol handler initialized
  367. [    3.087618] IR RC6 protocol handler initialized
  368. [    3.087635] IR JVC protocol handler initialized
  369. [    3.087654] IR Sony protocol handler initialized
  370. [    3.087672] IR SANYO protocol handler initialized
  371. [    3.087691] IR Sharp protocol handler initialized
  372. [    3.087709] IR MCE Keyboard/mouse protocol handler initialized
  373. [    3.087728] IR LIRC bridge handler initialized
  374. [    3.087746] IR XMP protocol handler initialized
  375. [    3.094159] rockchip-sy-mipi-dphy ff770000.syscon:mipi-phy-rx0: invalid resource
  376. [    3.094941] probe device ff9a0000.video-codec
  377. [    3.095091] rockchip-vpu ff9a0000.video-codec: can't request region for resource [mem 0xff9a0000-0xff9a07ff]
  378. [    3.095126] rockchip-vpu ff9a0000.video-codec: rockchip_vpu_hw_probe failed
  379. [    3.095146] rockchip_vpu_probe-- with error
  380. [    3.095234] rockchip-vpu: probe of ff9a0000.video-codec failed with error -16
  381. [    3.095538] usbcore: registered new interface driver uvcvideo
  382. [    3.095550] USB Video Class driver (1.1.1)
  383. [    3.095857] Driver for 1-wire Dallas network protocol.
  384. [    3.100251] rockchip-thermal ff280000.tsadc: Missing rockchip,grf property
  385. [    3.100631] rockchip-thermal ff280000.tsadc: tsadc is probed successfully!
  386. [    3.102043] md: linear personality registered for level -1
  387. [    3.102071] md: raid0 personality registered for level 0
  388. [    3.102094] md: raid1 personality registered for level 1
  389. [    3.102115] md: raid10 personality registered for level 10
  390. [    3.102484] md: raid6 personality registered for level 6
  391. [    3.102499] md: raid5 personality registered for level 5
  392. [    3.102510] md: raid4 personality registered for level 4
  393. [    3.102538] md: multipath personality registered for level -4
  394. [    3.102560] md: faulty personality registered for level -5
  395. [    3.103381] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
  396. [    3.103697] Bluetooth: Virtual HCI driver ver 1.5
  397. [    3.103944] Bluetooth: HCI UART driver ver 2.3
  398. [    3.103960] Bluetooth: HCI UART protocol H4 registered
  399. [    3.103972] Bluetooth: HCI UART protocol Three-wire (H5) registered
  400. [    3.103983] rtk_btcoex: rtk_btcoex_init: version: 1.2
  401. [    3.103991] rtk_btcoex: create workqueue
  402. [    3.104309] rtk_btcoex: alloc buffers 1408, 2240 for ev and l2
  403. [    3.104462] usbcore: registered new interface driver bfusb
  404. [    3.104602] usbcore: registered new interface driver btusb
  405. [    3.104628] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
  406. [    3.105472] cpu cpu0: bin=0
  407. [    3.105616] cpu cpu0: leakage=14
  408. [    3.105688] cpu cpu0: Failed to get reg
  409. [    3.105723] cpu cpu0: bin-scale=17
  410. [    3.106364] cpu cpu0: chip_version: 1 0x2
  411. [    3.108151] cpu cpu0: irdrop-scale=27
  412. [    3.108173] cpu cpu0: target-scale=27
  413. [    3.108211] cpu cpu0: scale_rate=1512000000
  414. [    3.109832] sdhci: Secure Digital Host Controller Interface driver
  415. [    3.109837] sdhci: Copyright(c) Pierre Ossman
  416. [    3.109843] Synopsys Designware Multimedia Card Interface Driver
  417. [    3.110370] of_get_named_gpiod_flags: can't parse 'maskrom_gpio' property of node '/dwmmc@ff0c0000[0]'
  418. [    3.110387] dwmmc_rockchip ff0c0000.dwmmc: IDMAC supports 32-bit address mode.
  419. [    3.110429] dwmmc_rockchip ff0c0000.dwmmc: Using internal DMA controller.
  420. [    3.110437] dwmmc_rockchip ff0c0000.dwmmc: Version ID is 270a
  421. [    3.110466] dwmmc_rockchip ff0c0000.dwmmc: DW MMC controller at irq 29,32 bit host data width,256 deep fifo
  422. [    3.110478] dwmmc_rockchip ff0c0000.dwmmc: 'clock-freq-min-max' property was deprecated.
  423. [    3.110570] dwmmc_rockchip ff0c0000.dwmmc: GPIO lookup for consumer cd
  424. [    3.110576] dwmmc_rockchip ff0c0000.dwmmc: using device tree for GPIO lookup
  425. [    3.110582] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/dwmmc@ff0c0000[0]'
  426. [    3.110588] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/dwmmc@ff0c0000[0]'
  427. [    3.110593] dwmmc_rockchip ff0c0000.dwmmc: using lookup tables for GPIO lookup
  428. [    3.110599] dwmmc_rockchip ff0c0000.dwmmc: lookup for GPIO cd failed
  429. [    3.110605] dwmmc_rockchip ff0c0000.dwmmc: GPIO lookup for consumer wp
  430. [    3.110610] dwmmc_rockchip ff0c0000.dwmmc: using device tree for GPIO lookup
  431. [    3.110615] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@ff0c0000[0]'
  432. [    3.110620] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@ff0c0000[0]'
  433. [    3.110625] dwmmc_rockchip ff0c0000.dwmmc: using lookup tables for GPIO lookup
  434. [    3.110630] dwmmc_rockchip ff0c0000.dwmmc: lookup for GPIO wp failed
  435. [    3.110734] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
  436. [    3.110741] rockchip-iodomain io-domains: Setting to 3300000 done
  437. [    3.110748] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
  438. [    3.110754] rockchip-iodomain io-domains: Setting to 3300000 done
  439. [    3.112890] usb 3-1: config 1 has an invalid interface number: 255 but max is 6
  440. [    3.112897] usb 3-1: config 1 has no interface number 6
  441. [    3.114115] usb 3-1: New USB device found, idVendor=0bda, idProduct=481a
  442. [    3.114122] usb 3-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
  443. [    3.114127] usb 3-1: Product: USB Audio
  444. [    3.114132] usb 3-1: Manufacturer: Generic
  445. [    3.114137] usb 3-1: SerialNumber: 201405280001
  446. [    3.124991] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  447. [    3.145042] dwmmc_rockchip ff0c0000.dwmmc: 1 slots initialized
  448. [    3.146374] of_get_named_gpiod_flags: can't parse 'maskrom_gpio' property of node '/dwmmc@ff0d0000[0]'
  449. [    3.146383] dwmmc_rockchip ff0d0000.dwmmc: IDMAC supports 32-bit address mode.
  450. [    3.146420] dwmmc_rockchip ff0d0000.dwmmc: Using internal DMA controller.
  451. [    3.146428] dwmmc_rockchip ff0d0000.dwmmc: Version ID is 270a
  452. [    3.146455] dwmmc_rockchip ff0d0000.dwmmc: DW MMC controller at irq 30,32 bit host data width,256 deep fifo
  453. [    3.146468] dwmmc_rockchip ff0d0000.dwmmc: 'clock-freq-min-max' property was deprecated.
  454. [    3.146494] dwmmc_rockchip ff0d0000.dwmmc: No vmmc regulator found
  455. [    3.146499] dwmmc_rockchip ff0d0000.dwmmc: No vqmmc regulator found
  456. [    3.146508] dwmmc_rockchip ff0d0000.dwmmc: GPIO lookup for consumer wp
  457. [    3.146513] dwmmc_rockchip ff0d0000.dwmmc: using device tree for GPIO lookup
  458. [    3.146519] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@ff0d0000[0]'
  459. [    3.146524] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@ff0d0000[0]'
  460. [    3.146529] dwmmc_rockchip ff0d0000.dwmmc: using lookup tables for GPIO lookup
  461. [    3.146534] dwmmc_rockchip ff0d0000.dwmmc: lookup for GPIO wp failed
  462. [    3.146942] of_get_named_gpiod_flags: parsed 'maskrom_gpio' property of node '/dwmmc@ff0f0000[0]' - status (0)
  463. [    3.156980] dwmmc_rockchip ff0f0000.dwmmc: set maskrom gpio to enable emmc
  464. [    3.156988] dwmmc_rockchip ff0f0000.dwmmc: IDMAC supports 32-bit address mode.
  465. [    3.157020] dwmmc_rockchip ff0f0000.dwmmc: Using internal DMA controller.
  466. [    3.157028] dwmmc_rockchip ff0f0000.dwmmc: Version ID is 270a
  467. [    3.157053] dwmmc_rockchip ff0f0000.dwmmc: DW MMC controller at irq 31,32 bit host data width,256 deep fifo
  468. [    3.157063] dwmmc_rockchip ff0f0000.dwmmc: 'clock-freq-min-max' property was deprecated.
  469. [    3.157083] dwmmc_rockchip ff0f0000.dwmmc: No vmmc regulator found
  470. [    3.157088] dwmmc_rockchip ff0f0000.dwmmc: No vqmmc regulator found
  471. [    3.157097] dwmmc_rockchip ff0f0000.dwmmc: GPIO lookup for consumer wp
  472. [    3.157102] dwmmc_rockchip ff0f0000.dwmmc: using device tree for GPIO lookup
  473. [    3.157107] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@ff0f0000[0]'
  474. [    3.157112] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@ff0f0000[0]'
  475. [    3.157117] dwmmc_rockchip ff0f0000.dwmmc: using lookup tables for GPIO lookup
  476. [    3.157122] dwmmc_rockchip ff0f0000.dwmmc: lookup for GPIO wp failed
  477. [    3.175039] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  478. [    3.196009] dwmmc_rockchip ff0f0000.dwmmc: 1 slots initialized
  479. [    3.196160] sdhci-pltfm: SDHCI platform and OF driver helper
  480. [    3.196291] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-leds/pwr-led[0]' - status (0)
  481. [    3.198410] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-leds/act-led[0]' - status (0)
  482. [    3.198499] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-leds/led1-led[0]' - status (0)
  483. [    3.198663] ledtrig-cpu: registered to indicate activity on CPUs
  484. [    3.199737] hidraw: raw HID events driver (C) Jiri Kosina
  485. [    3.204226] input: Generic USB Audio as /devices/platform/ff500000.usb/usb3/3-1/3-1:1.255/0003:0BDA:481A.0001/input/input0
  486. [    3.256587] hid-generic 0003:0BDA:481A.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [Generic USB Audio] on usb-ff500000.usb-1/input255
  487. [    3.256740] usbcore: registered new interface driver usbhid
  488. [    3.256753] usbhid: USB HID core driver
  489. [    3.256965] dtbocfg_module_init
  490. [    3.257018] dtbocfg_module_init: OK
  491. [    3.258861] ashmem: initialized
  492. [    3.263820] rknandbase v1.2 2018-05-08
  493. [    3.265027] find panel: asus,tc358762
  494. [    3.265079] ff960000.dsi.0 supply power not found, using dummy regulator
  495. [    3.265184] bridge-tc358762-dsi ff960000.dsi.0: GPIO lookup for consumer enable
  496. [    3.265205] bridge-tc358762-dsi ff960000.dsi.0: using device tree for GPIO lookup
  497. [    3.265226] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/dsi@ff960000/mipi-panel[0]'
  498. [    3.265246] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/dsi@ff960000/mipi-panel[0]'
  499. [    3.265265] bridge-tc358762-dsi ff960000.dsi.0: using lookup tables for GPIO lookup
  500. [    3.265285] bridge-tc358762-dsi ff960000.dsi.0: lookup for GPIO enable failed
  501. [    3.265495] rockchip-drm display-subsystem: devfreq is not set
  502. [    3.266043] rockchip-vop ff940000.vop: invalid resource
  503. [    3.266076] rockchip-vop ff940000.vop: failed to get vop cabc lut registers
  504. [    3.267431] rockchip-drm display-subsystem: bound ff940000.vop (ops 0xc0d81f14)
  505. [    3.267530] rockchip-vop ff930000.vop: invalid resource
  506. [    3.267561] rockchip-vop ff930000.vop: failed to get vop cabc lut registers
  507. [    3.268869] rockchip-drm display-subsystem: bound ff930000.vop (ops 0xc0d81f14)
  508. [    3.268907] mmc1: MAN_BKOPS_EN bit is not set
  509. [    3.269065] panel doesn't be connected
  510. [    3.269098] rockchip-drm display-subsystem: bound ff960000.dsi (ops 0xc0ddfee8)
  511. [    3.269215] dwhdmi-rockchip ff980000.hdmi: hdmi_i2s_audio_disable=true
  512. [    3.270133] i2c i2c-6: of_i2c: modalias failure on /hdmi@ff980000/ports
  513. [    3.270198] dwhdmi-rockchip ff980000.hdmi: registered DesignWare HDMI I2C bus driver
  514. [    3.270427] dwhdmi-rockchip ff980000.hdmi: Detected HDMI TX controller v2.00a with HDCP (DWC MHL PHY)
  515. [    3.271553] dw-hdmi-i2s-audio dw-hdmi-i2s-audio.4.auto: disable hdmi i2s audio
  516. [    3.272662] mmc_host mmc1: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
  517. [    3.283202] rockchip-drm display-subsystem: bound ff980000.hdmi (ops 0xc0d7b470)
  518. [    3.283224] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  519. [    3.283236] [drm] No driver support for vblank timestamp query.
  520. [    3.283472] rockchip-drm display-subsystem: failed to parse display resources
  521. [    3.283532] rockchip-drm display-subsystem: No connectors reported connected with modes
  522. [    3.283608] [drm] Cannot find any crtc or sizes - going 1024x768
  523. [    3.314785] Console: switching to colour frame buffer device 128x48
  524. [    3.333944] rockchip-drm display-subsystem: fb0:  frame buffer device
  525. [    3.356176] [board_info] create Board_info_proc_file sucessed!
  526. [    3.356256] project_id_2:0x0, project_id_1:0x0, project_id_0:0x0
  527. [    3.356305] ram_id_2:0x0, ram_id_1:0x1, ram_id_0:0x0
  528. [    3.356353] pcb_id_2:0x0, pcb_id_1:0x1, pcb_id_0:0x0
  529. [    3.656525] dwmmc_rockchip ff0f0000.dwmmc: Successfully tuned phase to 200
  530. [    3.658225] mmc1: new HS200 MMC card at address 0001
  531. [    3.661166] mmcblk1: mmc1:0001 HAG4a2 14.7 GiB
  532. [    3.662691] mmcblk1boot0: mmc1:0001 HAG4a2 partition 1 4.00 MiB
  533. [    3.664199] mmcblk1boot1: mmc1:0001 HAG4a2 partition 2 4.00 MiB
  534. [    3.665802] mmcblk1rpmb: mmc1:0001 HAG4a2 partition 3 4.00 MiB
  535. [    3.669041]  mmcblk1: p1 p2
  536. [    5.487577] usbcore: registered new interface driver snd-usb-audio
  537. [    5.522202] u32 classifier
  538. [    5.522293] Netfilter messages via NETLINK v0.30.
  539. [    5.522408] nfnl_acct: registering with nfnetlink.
  540. [    5.522761] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  541. [    5.525593] ctnetlink v0.93: registering with nfnetlink.
  542. [    5.529175] xt_time: kernel timezone is -0000
  543. [    5.529312] ip_set: protocol 6
  544. [    5.529803] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
  545. [    5.529989] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
  546. [    5.530623] IPVS: Creating netns size=1496 id=0
  547. [    5.530834] IPVS: ipvs loaded.
  548. [    5.530934] IPVS: [rr] scheduler registered.
  549. [    5.531014] IPVS: [wrr] scheduler registered.
  550. [    5.531088] IPVS: [lc] scheduler registered.
  551. [    5.531162] IPVS: [wlc] scheduler registered.
  552. [    5.531289] IPVS: [lblc] scheduler registered.
  553. [    5.531411] IPVS: [lblcr] scheduler registered.
  554. [    5.531486] IPVS: [dh] scheduler registered.
  555. [    5.531559] IPVS: [sh] scheduler registered.
  556. [    5.531634] IPVS: [sed] scheduler registered.
  557. [    5.531707] IPVS: [nq] scheduler registered.
  558. [    5.531799] IPVS: ftp: loaded support on port[0] = 21
  559. [    5.531878] IPVS: [sip] pe registered.
  560. [    5.534547] ip_tables: (C) 2000-2006 Netfilter Core Team
  561. [    5.536344] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
  562. [    5.536698] arp_tables: (C) 2002 David S. Miller
  563. [    5.537191] Initializing XFRM netlink socket
  564. [    5.542203] NET: Registered protocol family 10
  565. [    5.546755] ip6_tables: (C) 2000-2006 Netfilter Core Team
  566. [    5.549153] sit: IPv6 over IPv4 tunneling driver
  567. [    5.552664] NET: Registered protocol family 17
  568. [    5.552842] NET: Registered protocol family 15
  569. [    5.553121] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  570. [    5.553322] Bridge firewalling registered
  571. [    5.553397] Ebtables v2.0 registered
  572. [    5.554230] can: controller area network core (rev 20120528 abi 9)
  573. [    5.554572] NET: Registered protocol family 29
  574. [    5.554665] can: raw protocol (rev 20120528)
  575. [    5.554736] can: broadcast manager protocol (rev 20120528 t)
  576. [    5.554835] can: netlink gateway (rev 20130117) max_hops=1
  577. [    5.556162] Bluetooth: RFCOMM TTY layer initialized
  578. [    5.556173] Bluetooth: RFCOMM socket layer initialized
  579. [    5.556190] Bluetooth: RFCOMM ver 1.11
  580. [    5.556203] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  581. [    5.556207] Bluetooth: BNEP filters: protocol multicast
  582. [    5.556215] Bluetooth: BNEP socket layer initialized
  583. [    5.556222] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  584. [    5.556228] Bluetooth: HIDP socket layer initialized
  585. [    5.556266] 8021q: 802.1Q VLAN Support v1.8
  586. [    5.556285] lib80211: common routines for IEEE802.11 drivers
  587. [    5.556289] lib80211_crypt: registered algorithm 'NULL'
  588. [    5.556296] lib80211_crypt: registered algorithm 'WEP'
  589. [    5.556302] lib80211_crypt: registered algorithm 'CCMP'
  590. [    5.556309] lib80211_crypt: registered algorithm 'TKIP'
  591. [    5.556317] [WLAN_RFKILL]: Enter rfkill_wlan_init
  592. [    5.556495] [WLAN_RFKILL]: Enter rfkill_wlan_probe
  593. [    5.556522] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6212
  594. [    5.556527] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
  595. [    5.556531] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
  596. [    5.556537] of_get_named_gpiod_flags: can't parse 'WIFI,poweren_gpio' property of node '/wireless-wlan[0]'
  597. [    5.556542] of_get_named_gpiod_flags: can't parse 'WIFI,vbat_gpio' property of node '/wireless-wlan[0]'
  598. [    5.556547] of_get_named_gpiod_flags: can't parse 'WIFI,reset_gpio' property of node '/wireless-wlan[0]'
  599. [    5.556572] of_get_named_gpiod_flags: parsed 'WIFI,host_wake_irq' property of node '/wireless-wlan[0]' - status (0)
  600. [    5.556577] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 150, flags = 0.
  601. [    5.556581] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
  602. [    5.556587] [WLAN_RFKILL]: Exit rfkill_wlan_probe
  603. [    5.556640] [BT_RFKILL]: Enter rfkill_rk_init
  604. [    5.556875] of_get_named_gpiod_flags: parsed 'uart_rts_gpios' property of node '/wireless-bluetooth[0]' - status (0)
  605. [    5.556881] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 139.
  606. [    5.556888] of_get_named_gpiod_flags: can't parse 'BT,power_gpio' property of node '/wireless-bluetooth[0]'
  607. [    5.556903] of_get_named_gpiod_flags: parsed 'BT,reset_gpio' property of node '/wireless-bluetooth[0]' - status (0)
  608. [    5.556908] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 149.
  609. [    5.556921] of_get_named_gpiod_flags: parsed 'BT,wake_gpio' property of node '/wireless-bluetooth[0]' - status (0)
  610. [    5.556925] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 146.
  611. [    5.556938] of_get_named_gpiod_flags: parsed 'BT,wake_host_irq' property of node '/wireless-bluetooth[0]' - status (0)
  612. [    5.556943] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 151.
  613. [    5.556949] [BT_RFKILL]: bluetooth_platdata_parse_dt: clk_get failed!!!.
  614. [    5.556992] [BT_RFKILL]: Request irq for bt wakeup host
  615. [    5.557016] [BT_RFKILL]: BT_WAKE_HOST IRQ fired
  616. [    5.557042] [BT_RFKILL]: ** disable irq
  617. [    5.557060] [BT_RFKILL]: bt_default device registered.
  618. [    5.557123] Key type dns_resolver registered
  619. [    5.557624] ThumbEE CPU extension supported.
  620. [    5.557637] Registering SWP/SWPB emulation handler
  621. [    5.558083] registered taskstats version 1
  622. [    5.558097] Loading compiled-in X.509 certificates
  623. [    5.558572] mali ffa30000.gpu: Failed to get leakage
  624. [    5.558669] mali ffa30000.gpu: Failed to get pvtm
  625. [    5.558991] W : [File] : drivers/gpu/arm/midgard/platform/rk/mali_kbase_config_rk.c; [Line] : 113; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
  626. [    5.559245] mali ffa30000.gpu: GPU identified as 0x0750 r0p0 status 1
  627. [    5.559350] mali ffa30000.gpu: Protected mode not available
  628. [    5.559790] mali ffa30000.gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
  629. [    5.559900] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 405; [Func] : kbase_devfreq_init(); success initing power_model_simple.
  630. [    5.560205] mali ffa30000.gpu: Probed as mali0
  631. [    5.560750] of_get_named_gpiod_flags: parsed 'wolirq-gpio' property of node '/ethernet@ff290000[0]' - status (0)
  632. [    5.560813] rk_gmac-dwmac ff290000.ethernet: clock input or output? (input).
  633. [    5.560821] rk_gmac-dwmac ff290000.ethernet: TX delay(0x30).
  634. [    5.560828] rk_gmac-dwmac ff290000.ethernet: RX delay(0x10).
  635. [    5.560841] rk_gmac-dwmac ff290000.ethernet: integrated PHY? (no).
  636. [    5.560930] rk_gmac-dwmac ff290000.ethernet: cannot get clock clk_mac_speed
  637. [    5.561019] rk_gmac-dwmac ff290000.ethernet: clock input from PHY
  638. [    5.566033] rk_gmac-dwmac ff290000.ethernet: init for RGMII
  639. [    5.566099] stmmac - user ID: 0x10, Synopsys ID: 0x35
  640. [    5.566103]  Ring mode enabled
  641. [    5.566107]  DMA HW capability register supported
  642. [    5.566110]  Normal descriptors
  643. [    5.566113]  RX Checksum Offload Engine supported (type 2)
  644. [    5.566116]  TX Checksum insertion supported
  645. [    5.566119]  Wake-Up On Lan supported
  646. [    5.566148]  Enable RX Mitigation via HW Watchdog Timer
  647. [    5.566222] of_get_named_gpiod_flags: parsed 'snps,reset-gpio' property of node '/ethernet@ff290000[0]' - status (0)
  648. [    5.566628] vendor storage:20160801 ret = 0
  649. [    5.575487] devfreq ffa30000.gpu: Couldn't update frequency transition information.
  650. [    6.600967] libphy: stmmac: probed
  651. [    6.601042] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
  652. [    6.601098] eth%d: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
  653. [    6.608599] of_get_named_gpiod_flags: can't parse 'maskrom_gpio' property of node '/dwmmc@ff0d0000[0]'
  654. [    6.608691] dwmmc_rockchip ff0d0000.dwmmc: IDMAC supports 32-bit address mode.
  655. [    6.609081] dwmmc_rockchip ff0d0000.dwmmc: Using internal DMA controller.
  656. [    6.609168] dwmmc_rockchip ff0d0000.dwmmc: Version ID is 270a
  657. [    6.609321] dwmmc_rockchip ff0d0000.dwmmc: DW MMC controller at irq 30,32 bit host data width,256 deep fifo
  658. [    6.609477] dwmmc_rockchip ff0d0000.dwmmc: 'clock-freq-min-max' property was deprecated.
  659. [    6.609730] dwmmc_rockchip ff0d0000.dwmmc: No vmmc regulator found
  660. [    6.609790] dwmmc_rockchip ff0d0000.dwmmc: No vqmmc regulator found
  661. [    6.609888] dwmmc_rockchip ff0d0000.dwmmc: GPIO lookup for consumer wp
  662. [    6.609946] dwmmc_rockchip ff0d0000.dwmmc: using device tree for GPIO lookup
  663. [    6.610012] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@ff0d0000[0]'
  664. [    6.610073] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@ff0d0000[0]'
  665. [    6.610132] dwmmc_rockchip ff0d0000.dwmmc: using lookup tables for GPIO lookup
  666. [    6.610193] dwmmc_rockchip ff0d0000.dwmmc: lookup for GPIO wp failed
  667. [    6.611051] platform sdio-pwrseq: GPIO lookup for consumer reset
  668. [    6.611113] platform sdio-pwrseq: using device tree for GPIO lookup
  669. [    6.611272] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/sdio-pwrseq[0]' - status (0)
  670. [    6.611456] platform sdio-pwrseq: GPIO lookup for consumer reset
  671. [    6.611516] platform sdio-pwrseq: using device tree for GPIO lookup
  672. [    6.611750] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/sdio-pwrseq[1]' - status (0)
  673. [    6.611903] dwmmc_rockchip ff0d0000.dwmmc: allocated mmc-pwrseq
  674. [    6.625363] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  675. [    6.645612] dwmmc_rockchip ff0d0000.dwmmc: 1 slots initialized
  676. [    6.648177] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/button@0[0]' - status (0)
  677. [    6.648419] gpio-5 (GPIO Key Power): gpiod_set_debounce: missing set() or set_debounce() operations
  678. [    6.649999] input: gpio-keys as /devices/platform/gpio-keys/input/input1
  679. [    6.652966] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:50:12 UTC (1358499012)
  680. [    6.657695] device-tree: Duplicate name in testcase-data, renamed to "duplicate-name#1"
  681. [    6.661371] ### dt-test ### start of unittest - you will see error messages
  682. [    6.662655] /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
  683. [    6.662966] /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
  684. [    6.662999] mmc_host mmc2: Bus speed (slot 0) = 49500000Hz (slot req 50000000Hz, actual 49500000HZ div = 0)
  685. [    6.663314] /testcase-data/phandle-tests/consumer-a: could not find phandle
  686. [    6.663542] /testcase-data/phandle-tests/consumer-a: could not find phandle
  687. [    6.663747] /testcase-data/phandle-tests/consumer-a: arguments longer than property
  688. [    6.663964] /testcase-data/phandle-tests/consumer-a: arguments longer than property
  689. [    6.665387] mmc2: new high speed SDIO card at address 0001
  690. [    6.666048] irq: no irq domain found for /testcase-data/interrupts/intc0 !
  691. [    6.676319] overlay_is_topmost: #5 clashes #6 @/testcase-data/overlay-node/test-bus/test-unittest8
  692. [    6.676538] overlay_removal_is_ok: overlay #5 is not topmost
  693. [    6.676673] of_overlay_destroy: removal check failed for overlay #5
  694. [    6.685469] ### dt-test ### end of unittest - 148 passed, 0 failed
  695. [    6.701401] vcc_sd: disabling
  696. [    6.701417] vcc_flash: disabling
  697. [    6.701425] vdd_logic: disabling
  698. [    6.701978] ALSA device list:
  699. [    6.701989]   #0: Generic USB Audio OnBoard at usb-ff500000.usb-1, high speed
  700. [    6.702171] md: Waiting for all devices to be available before autodetect
  701. [    6.702179] md: If you don't use raid, use raid=noautodetect
  702. [    6.703092] md: Autodetecting RAID arrays.
  703. [    6.703103] md: Scanned 0 and added 0 devices.
  704. [    6.703109] md: autorun ...
  705. [    6.703116] md: ... autorun DONE.
  706. [    6.704548] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities
  707. [    6.705212] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities
  708. [    6.736972] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
  709. [    6.737012] VFS: Mounted root (ext4 filesystem) on device 179:2.
  710. [    6.737374] devtmpfs: mounted
  711. [    6.739259] Freeing unused kernel memory: 1024K
  712. [    6.831767] systemd[1]: System time before build time, advancing clock.
  713. [    6.839026] systemd[1]: Failed to insert module 'autofs4': No such file or directory
  714. [    6.847701] random: systemd: uninitialized urandom read (16 bytes read, 31 bits of entropy available)
  715. [    6.863011] random: systemd: uninitialized urandom read (16 bytes read, 32 bits of entropy available)
  716. [    6.871926] random: systemd-cryptse: uninitialized urandom read (16 bytes read, 32 bits of entropy available)
  717. [    6.882539] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 33 bits of entropy available)
  718. [    6.891206] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 33 bits of entropy available)
  719. [    6.892224] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 33 bits of entropy available)
  720. [    6.892419] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 33 bits of entropy available)
  721. [    6.914273] random: systemd: uninitialized urandom read (16 bytes read, 36 bits of entropy available)
  722. [    6.914411] random: systemd: uninitialized urandom read (16 bytes read, 36 bits of entropy available)
  723. [    6.915456] random: systemd: uninitialized urandom read (16 bytes read, 36 bits of entropy available)
  724. [    7.314202] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null)
  725. [    7.359575] systemd-journald[170]: Received request to flush runtime journal from PID 1
  726. [    7.703553] RTW: module init start
  727. [    7.703564] RTW: rtl8723bs v5.1.7.4_24878.20171031_BTCOEX20170728-6b4e
  728. [    7.703568] RTW: build time: Feb  8 2019 15:44:45
  729. [    7.703572] RTW: rtl8723bs BT-Coex version = BTCOEX20170728-6b4e
  730. [    7.720802] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  731. [    7.799323] snd_soc_pisound: loading out-of-tree module taints kernel.
  732. [    7.800085] rockchip-pinctrl pinctrl: unable to find group for node pisound_pins
  733. [    7.800217] pisound: Searching for spi device...
  734. [    7.800223] pisound:         Not found!
  735. [    7.800265] pisound:         Found!
  736. [    7.800293] snd-rpi-pisound sound-ext-card: GPIO lookup for consumer reset
  737. [    7.800299] snd-rpi-pisound sound-ext-card: using device tree for GPIO lookup
  738. [    7.800351] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/sound-ext-card[1]' - status (0)
  739. [    7.800366] no flags found for reset
  740. [    7.800373] snd-rpi-pisound sound-ext-card: GPIO lookup for consumer data_available
  741. [    7.800378] snd-rpi-pisound sound-ext-card: using device tree for GPIO lookup
  742. [    7.800399] of_get_named_gpiod_flags: parsed 'data_available-gpios' property of node '/sound-ext-card[0]' - status (0)
  743. [    7.800409] no flags found for data_available
  744. [    7.847700] RTW: 0x000: 29 81 03 7C 51 08 28 00    62 07 0D 45 10 02 00 00
  745. [    7.847744] RTW: 0x010: 2A 2A 2A 2A 29 29 31 31    30 2F 2F E0 FF FF FF FF
  746. [    7.847766] RTW: 0x020: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
  747. [    7.847787] RTW: 0x030: FF FF FF FF FF FF FF FF    FF FF 2D 2D 2D 2D 2D 2D
  748. [    7.847808] RTW: 0x040: 2D 2D 2D 2D 2D E0 FF FF    FF FF FF FF FF FF FF FF
  749. [    7.847830] RTW: 0x050: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
  750. [    7.847865] RTW: 0x060: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
  751. [    7.847906] RTW: 0x070: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
  752. [    7.847928] RTW: 0x080: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
  753. [    7.847954] RTW: 0x090: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
  754. [    7.847990] RTW: 0x0a0: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
  755. [    7.848012] RTW: 0x0b0: FF FF FF FF FF FF FF FF    20 23 1E 00 00 00 FF FF
  756. [    7.848032] RTW: 0x0c0: FF 29 20 11 00 00 00 FF    00 FF 12 FF FF FF FF FF
  757. [    7.848053] RTW: 0x0d0: 3E 10 01 02 23 00 00 FF    20 04 4C 02 26 06 21 02
  758. [    7.848074] RTW: 0x0e0: 0C 00 22 04 00 08 00 32    FF 21 02 0C 00 22 2A 01
  759. [    7.848094] RTW: 0x0f0: 01 00 00 00 00 00 00 00    00 00 00 00 02 00 FF FF
  760. [    7.848115] RTW: 0x100: 00 00 00 00 00 00 00 00    00 00 00 00 00 00 00 00
  761. [    7.848140] RTW: 0x110: 00 EB 00 6E 01 00 00 00    00 FF 40 9F 38 DD 8A 17
  762. [    7.848161] RTW: 0x120: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
  763. [    7.848181] RTW: 0x130: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
  764. [    7.848202] RTW: 0x140: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
  765. [    7.848223] RTW: 0x150: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
  766. [    7.848256] RTW: 0x160: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
  767. [    7.848277] RTW: 0x170: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
  768. [    7.848297] RTW: 0x180: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
  769. [    7.848318] RTW: 0x190: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
  770. [    7.848339] RTW: 0x1a0: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
  771. [    7.848360] RTW: 0x1b0: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
  772. [    7.848383] RTW: 0x1c0: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
  773. [    7.848404] RTW: 0x1d0: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
  774. [    7.848425] RTW: 0x1e0: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
  775. [    7.848446] RTW: 0x1f0: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
  776.  
  777. [    7.862300] RTW: hal_com_config_channel_plan chplan:0x20
  778. [    7.873184] pisound: Detected Pisound card:
  779. [    7.873193] pisound:         Serial:  PS-09JWDMX
  780. [    7.873196] pisound:         Version: 1.02
  781. [    7.873200] pisound:         Id:      1e93153555313630360b0c20
  782. [    7.873233] snd-rpi-pisound sound-ext-card: GPIO lookup for consumer osr
  783. [    7.873239] snd-rpi-pisound sound-ext-card: using device tree for GPIO lookup
  784. [    7.873317] of_get_named_gpiod_flags: parsed 'osr-gpios' property of node '/sound-ext-card[0]' - status (0)
  785. [    7.873334] no flags found for osr
  786. [    7.873341] snd-rpi-pisound sound-ext-card: GPIO lookup for consumer osr
  787. [    7.873345] snd-rpi-pisound sound-ext-card: using device tree for GPIO lookup
  788. [    7.873383] of_get_named_gpiod_flags: parsed 'osr-gpios' property of node '/sound-ext-card[1]' - status (0)
  789. [    7.873393] no flags found for osr
  790. [    7.873399] snd-rpi-pisound sound-ext-card: GPIO lookup for consumer osr
  791. [    7.873404] snd-rpi-pisound sound-ext-card: using device tree for GPIO lookup
  792. [    7.873449] of_get_named_gpiod_flags: parsed 'osr-gpios' property of node '/sound-ext-card[2]' - status (0)
  793. [    7.873459] no flags found for osr
  794. [    7.873465] snd-rpi-pisound sound-ext-card: GPIO lookup for consumer reset
  795. [    7.873470] snd-rpi-pisound sound-ext-card: using device tree for GPIO lookup
  796. [    7.873491] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/sound-ext-card[0]' - status (0)
  797. [    7.873499] no flags found for reset
  798. [    7.873505] snd-rpi-pisound sound-ext-card: GPIO lookup for consumer button
  799. [    7.873510] snd-rpi-pisound sound-ext-card: using device tree for GPIO lookup
  800. [    7.873530] of_get_named_gpiod_flags: parsed 'button-gpios' property of node '/sound-ext-card[0]' - status (0)
  801. [    7.873537] no flags found for button
  802. [    7.874812] snd-rpi-pisound sound-ext-card: snd-soc-dummy-dai <-> ff890000.i2s mapping ok
  803. [    7.886943] RTW: rtw_regsty_chk_target_tx_power_valid return _FALSE for band:0, path:0, rs:0, t:-1
  804. [    7.887340] RTW: rtw_ndev_init(wlan0) if1 mac_addr=40:9f:38:dd:8a:17
  805. [    7.888295] RTW: module init ret=0
  806. [    8.150879] ttyS0 - failed to request DMA, use interrupt mode
  807. [    8.207852] random: nonblocking pool is initialized
  808. [    8.398439] cfg80211: World regulatory domain updated:
  809. [    8.398451] cfg80211:  DFS Master region: unset
  810. [    8.398456] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  811. [    8.398463] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  812. [    8.398469] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  813. [    8.398475] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  814. [    8.398481] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  815. [    8.398487] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
  816. [    8.398492] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  817. [    8.398498] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  818. [    8.398503] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  819. [    8.578248] Adding 102396k swap on /var/swap.  Priority:-1 extents:1 across:102396k SS
  820. [    8.818765] rtk_btcoex: Open BTCOEX
  821. [    8.818776] rtk_btcoex: create_udpsocket: connect_port: 30001
  822. [    8.818799] rtk_btcoex: send msg INVITE_REQ with len:11
  823. [    8.822153] rtk_btcoex: BTCOEX hci_rev 0x1e4e
  824. [    8.822171] rtk_btcoex: BTCOEX lmp_subver 0x2b06
  825. [    8.840717] [board_info] board_info_proc_read board_type='Tinker Board S' ram_size='2 GB' pcb='PR'
  826. [    9.142199] [board_info] board_info_proc_read board_type='Tinker Board S' ram_size='2 GB' pcb='PR'
  827. [    9.350665] [drm:dw_hdmi_rockchip_set_property] *ERROR* failed to set rockchip hdmi connector property
  828. [    9.350691] [drm:dw_hdmi_rockchip_set_property] *ERROR* failed to set rockchip hdmi connector property
  829. [    9.350703] [drm:dw_hdmi_rockchip_set_property] *ERROR* failed to set rockchip hdmi connector property
  830. [    9.350714] [drm:dw_hdmi_rockchip_set_property] *ERROR* failed to set rockchip hdmi connector property
  831. [    9.350726] [drm:dw_hdmi_rockchip_set_property] *ERROR* failed to set rockchip hdmi connector property
  832. [    9.350736] [drm:dw_hdmi_rockchip_set_property] *ERROR* failed to set rockchip hdmi connector property
  833. [    9.932438] RTW: wlan0- hw port(0) mac_addr =40:9f:38:dd:8a:17
  834. [    9.937440] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  835. [    9.939449] IPVS: Creating netns size=1496 id=1
  836. [    9.939479] IPVS: ftp: loaded support on port[0] = 21
  837. [   10.347551] [board_info] board_info_proc_read board_type='Tinker Board S' ram_size='2 GB' pcb='PR'
  838. [   10.356000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  839. [   10.477547] [board_info] board_info_proc_read board_type='Tinker Board S' ram_size='2 GB' pcb='PR'
  840. [   10.503473] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  841. [   10.625619] setLedConfiguration: #### before setting led, Reg26 = 0xd1 , Reg28 = 0x9770
  842. [   10.625934] setLedConfiguration: #### after setting led, Reg26 = 0x91 , Reg28 = 0x9040
  843. [   10.625997] rk_gmac-dwmac ff290000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
  844. [   11.819381] RTW: nolinked power save enter
  845. [   11.868450] RTW: wlan0- hw port(0) mac_addr =40:9f:38:dd:8a:17
  846. [   11.870735] RTW: nolinked power save leave
  847. [   13.188708] RTW: nolinked power save enter
  848. [   15.508662] [board_info] board_info_proc_read board_type='Tinker Board S' ram_size='2 GB' pcb='PR'
  849. [   35.095618] RTW: wlan0- hw port(0) mac_addr =40:9f:38:dd:8a:17
  850. [   35.098784] RTW: nolinked power save leave
  851. [   36.526282] RTW: nolinked power save enter
  852. [   68.106633] RTW: wlan0- hw port(0) mac_addr =40:9f:38:dd:8a:17
  853. [   68.109915] RTW: nolinked power save leave
  854. [   69.526315] RTW: nolinked power save enter
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top