Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.0.101-gabec222-dirty (foidbgen@linux-f2ft) (gcc version 4.8 (GCC) ) #3 PREEMPT Tue Oct 10 22:51:18 UTC 2017
- [ 0.000000] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c53c7d
- [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: pico
- [ 0.000000] Ignoring unrecognised tag 0x4d534d76
- [ 0.000000] Partition (from atag) misc -- Offset:7fc Size:4
- [ 0.000000] Partition (from atag) recovery -- Offset:bf Size:14
- [ 0.000000] Partition (from atag) boot -- Offset:d3 Size:10
- [ 0.000000] Partition (from atag) system -- Offset:e3 Size:3ad
- [ 0.000000] Partition (from atag) cache -- Offset:490 Size:ec
- [ 0.000000] Partition (from atag) userdata -- Offset:5a4 Size:258
- [ 0.000000] Partition (from atag) devlog -- Offset:57c Size:28
- [ 0.000000] CAM_AWB_CAL Data size = 1026 , 0x59504550, size = 4096
- [ 0.000000] Ignoring unrecognised tag 0x41387898
- [ 0.000000] BT Data size= 4, 0x43294329,
- [ 0.000000] 18,
- [ 0.000000] 87,
- [ 0.000000] 96,
- [ 0.000000] cc,
- [ 0.000000] 5b,
- [ 0.000000] ec,
- [ 0.000000] 00,
- [ 0.000000] 00,
- [ 0.000000] [K] parse_tag_ps_calibration: ps_kparam1 = 0x50530306, ps_kparam2 = 0xffff0a0f
- [ 0.000000] Ignoring unrecognised tag 0x5441001f
- [ 0.000000] paddr=0x12c00000
- [ 0.000000] paddr=0x12c00000
- [ 0.000000] paddr=0x12c00000
- [ 0.000000] paddr=0x12c00000
- [ 0.000000] memory pool 4 (start 2d600000 size 2700000) initialized
- [ 0.000000] Memory policy: ECC disabled, Data cache writeback
- [ 0.000000] L310 cache controller enabled
- [ 0.000000] L310 cache controller enabled
- [ 0.000000] l2x0: 8 ways, CACHE_ID 0x410054c7, AUX_CTRL 0x00540000, Cache size: 262144 B
- [ 0.000000] [SMD] smem_find(137, 72): wrong size 64
- [ 0.000000] socinfo_init: v4, id=96, ver=1.1, raw_id=1537, raw_ver=1, hw_plat=3, hw_plat_ver=196608
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 108126
- [ 0.000000] Kernel command line: board_pico.disable_uart3=0 board_pico.usb_h2w_sw=0 board_pico.disable_sdcard=0 diag.enabled=0 board_pico.debug_uart=0 smisize=0 userdata_sel=0 androidboot.emmc=false androidboot.pagesize=4096 skuid=0 ddt=20 androidboot.lb=1 androidboot.baseband=1.11.82.17 androidboot.cid=HTC__B25 androidboot.devicerev=2 androidboot.batt_poweron=good_battery androidboot.carrier=HTC-Poland androidboot.mid=PJ0310000 enable_zcharge=3 androidboot.keycaps=qwerty androidboot.mode=normal androidboot.serialno=HT1ATVN01350 androidboot.bootloader=1.02.0000 androidboot.nledhw=1 zygote_oneshot=off kmemleak=off no_console_suspend=1 console=null androidboot.hardware=pico androidboot.selinux=permissive selinux=0
- [ 0.000000] [K] board_bootloader_setup: 1.02.0000
- [ 0.000000] [K] board_bootloader_setup: SHIP BUILD
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] allocated 1904640 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Memory: 426MB = 426MB total
- [ 0.000000] Memory: 419932k/419932k available, 56228k reserved, 0K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
- [ 0.000000] vmalloc : 0xdd800000 - 0xfa000000 ( 456 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xdd100000 ( 465 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .init : 0xc0008000 - 0xc003e000 ( 216 kB)
- [ 0.000000] .text : 0xc003e000 - 0xc080a000 (7984 kB)
- [ 0.000000] .data : 0xc080a000 - 0xc08669c0 ( 371 kB)
- [ 0.000000] .bss : 0xc08669e8 - 0xc0976f30 (1090 kB)
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:277
- [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000244] Calibrating delay loop... 398.13 BogoMIPS (lpj=1990656)
- [ 0.060150] pid_max: default: 32768 minimum: 301
- [ 0.060272] Security Framework initialized
- [ 0.060302] SELinux: Disabled at boot.
- [ 0.060363] Mount-cache hash table entries: 512
- [ 0.060913] Initializing cgroup subsys cpuacct
- [ 0.060943] Initializing cgroup subsys memory
- [ 0.061004] Initializing cgroup subsys devices
- [ 0.061035] Initializing cgroup subsys freezer
- [ 0.061035] Initializing cgroup subsys net_cls
- [ 0.061065] Initializing cgroup subsys blkio
- [ 0.061096] Initializing cgroup subsys perf_event
- [ 0.061126] Initializing cgroup subsys bfqio
- [ 0.061126] Initializing cgroup subsys timer_slack
- [ 0.061187] CPU: Testing write buffer coherency: ok
- [ 0.061523] hw perfevents: no hardware support available
- [ 0.062225] devtmpfs: initialized
- [ 0.063873] print_constraints: dummy:
- [ 0.063934] rdev_init_debugfs: Error-Bad Function Input
- [ 0.064117] NET: Registered protocol family 16
- [ 0.065490] acpuclk_7201_init()
- [ 0.065521] Shared PLL control available.
- [ 0.065704] L val: PLL0: 50, PLL1: 12, PLL2: 62
- [ 0.065704] Turbo mode supported but not enabled.
- [ 4.771179] ACPU running at 600000 KHz
- [ 4.771209] Id CPU-KHz PLL DIV AHB-KHz ADIV AXI-KHz D0 D1 D2 D4 U0 U1 U2 U4
- [ 4.771240] 0 19200 5 1 2400 4 30720 -1 -1 -1 -1 5 3 6 -1
- [ 4.771270] 1 61440 1 4 7680 4 61440 -1 -1 -1 -1 5 3 6 -1
- [ 4.771301] 2 122880 1 2 15360 4 61440 -1 1 -1 -1 7 3 6 -1
- [ 4.771331] 3 245760 1 1 30720 4 61440 -1 1 -1 -1 7 -1 8 -1
- [ 4.771362] 4 300000 2 4 37500 4 150000 -1 1 -1 -1 7 -1 9 -1
- [ 4.771392] 5 320000 0 3 40000 4 122880 -1 1 4 -1 7 -1 9 -1
- [ 4.771423] 6 400000 2 3 50000 4 122880 5 1 4 -1 7 -1 12 -1
- [ 4.771453] 7 480000 0 2 60000 4 122880 5 2 4 -1 -1 -1 16 -1
- [ 4.771484] 8 600000 2 2 75000 4 200000 5 3 4 -1 -1 -1 16 -1
- [ 4.771514] 9 678000 2 2 80000 4 200000 5 -1 4 -1 -1 -1 16 -1
- [ 4.771545] 10 722000 2 2 85000 4 200000 7 -1 6 -1 -1 -1 16 -1
- [ 4.771575] 11 767000 2 2 92000 4 200000 7 -1 6 -1 -1 -1 16 -1
- [ 4.771606] 12 800000 2 2 94000 4 200000 7 -1 6 -1 -1 -1 16 -1
- [ 4.771636] 13 816000 2 2 96000 4 200000 7 -1 8 -1 -1 -1 16 -1
- [ 4.771667] 14 828000 2 2 99000 4 200000 7 -1 8 -1 -1 -1 16 -1
- [ 4.771697] 15 844000 2 2 102000 4 200000 7 -1 8 -1 -1 -1 16 -1
- [ 4.771728] 16 878000 2 2 104000 4 200000 7 -1 8 -1 -1 -1 -1 -1
- [ 4.771728] 13 scaling frequencies supported.
- [ 4.771759] pico_init() revision = 0x80
- [ 4.771972] print_constraints: smps1: 1100 mV normal
- [ 4.772186] print_constraints: smps2: 1100 mV normal
- [ 4.772369] print_constraints: smps3: 1800 mV normal
- [ 4.772552] print_constraints: smps4: 2100 mV normal
- [ 4.772766] print_constraints: ldo01: 2100 mV normal
- [ 4.772918] print_constraints: ldo02: 2850 mV normal
- [ 4.773101] print_constraints: ldo03: 1200 mV normal
- [ 4.773315] print_constraints: ldo04: 1100 mV normal
- [ 4.773529] print_constraints: ldo05: 1300 <--> 1350 mV normal
- [ 4.773712] print_constraints: ldo06: 1200 mV normal
- [ 4.773895] print_constraints: ldo07: 2600 mV normal
- [ 4.774108] print_constraints: ldo08: 2850 mV normal
- [ 4.774322] print_constraints: ldo09: 1800 mV normal
- [ 4.774505] print_constraints: ldo10: 1800 <--> 3000 mV normal
- [ 4.774719] print_constraints: ldo11: 1800 mV normal
- [ 4.774902] print_constraints: ldo12: 2850 mV normal
- [ 4.775115] print_constraints: ldo13: 2850 mV normal
- [ 4.775329] print_constraints: ldo14: 3300 mV normal
- [ 4.775543] print_constraints: ldo15: 1800 <--> 2850 mV normal
- [ 4.775756] print_constraints: ldo16: 1800 <--> 2850 mV normal
- [ 4.775939] print_constraints: ldo17: 2900 <--> 3300 mV normal
- [ 4.776184] print_constraints: ldo18: 2700 mV normal
- [ 4.776367] print_constraints: ldo19: 1200 <--> 1800 mV normal
- [ 4.776611] print_constraints: ncp: 1800 mV normal
- [ 4.776947] ram_console: got buffer at 2fd00000, size e0000
- [ 4.776977] ram_console: no valid data in buffer (sig = 0xffffffff)
- [ 4.777374] console [ram-1] enabled
- [ 4.779418] config_pico_usb_id_gpios 19 input none pull
- [ 4.779418] pico_add_usb_devices rev: 128
- [ 4.779632] pico_wifi_init: start
- [ 4.779846] pico_init_mmc
- [ 4.780151] [DISP] panel_type= 0x2940035
- [ 4.780181] [DISP] pico_init_panel: mipi_samsung
- [ 4.780395] [DISP] panel ID= 0x2940035
- [ 4.780609] BD_ADDRESS=18:87:96:cc:5b:ec
- [ 4.780792] No Cypress chip!
- [ 4.781219] hw-breakpoint: found 4 breakpoint and 1 watchpoint registers.
- [ 4.781249] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
- [ 4.781280] hw-breakpoint: maximum watchpoint size is 4 bytes.
- [ 4.781799] awesom3: going to try configure awesom3
- [ 4.781829] Partition (for awesom3) misc -- Offset:2044 Size:4
- [ 4.781860] Partition (for awesom3) recovery -- Offset:191 Size:20
- [ 4.781860] Partition (for awesom3) boot -- Offset:211 Size:16
- [ 4.781890] Partition (for awesom3) system -- Offset:227 Size:941
- [ 4.781921] Partition (for awesom3) cache -- Offset:1168 Size:236
- [ 4.781921] Partition (for awesom3) userdata -- Offset:1444 Size:600
- [ 4.781951] Partition (for awesom3) devlog -- Offset:1404 Size:40
- [ 4.781982] Partition (by awesom3) misc -- Offset:227 Size:4
- [ 4.781982] Partition (by awesom3) recovery -- Offset:191 Size:20
- [ 4.782012] Partition (by awesom3) boot -- Offset:211 Size:16
- [ 4.782012] Partition (by awesom3) system -- Offset:387 Size:1661
- [ 4.782043] Partition (by awesom3) cache -- Offset:355 Size:32
- [ 4.782073] Partition (by awesom3) userdata -- Offset:235 Size:120
- [ 4.782073] Partition (by awesom3) devlog -- Offset:231 Size:4
- [ 4.782104] awesom3: configuring awesom3 succeded!
- [ 4.782226] gsbi_qup_i2c_gpio_config: adap_id = 0, config_type = 1
- [ 4.782684] gsbi_qup_i2c_gpio_config: adap_id = 1, config_type = 1
- [ 4.783996] print_constraints: fs_gfx3d: normal
- [ 4.795288] bio: create slab <bio-0> at 0
- [ 4.795989] ION heap vmalloc created
- [ 4.796051] ION heap audio created at 2d600000 with size 13a000
- [ 4.796112] ION heap sf created at 2d73a000 with size 1500000
- [ 4.796752] SCSI subsystem initialized
- [ 4.796966] usbcore: registered new interface driver usbfs
- [ 4.797119] usbcore: registered new interface driver hub
- [ 4.797332] usbcore: registered new device driver usb
- [ 4.797760] Advanced Linux Sound Architecture Driver Version 1.0.24.
- [ 4.798492] Bluetooth: Core ver 2.16
- [ 4.798583] NET: Registered protocol family 31
- [ 4.798583] Bluetooth: HCI device and connection manager initialized
- [ 4.798614] Bluetooth: HCI socket layer initialized
- [ 4.798645] Bluetooth: L2CAP socket layer initialized
- [ 4.798858] Bluetooth: SCO socket layer initialized
- [ 4.799346] cfg80211: Calling CRDA to update world regulatory domain
- [ 4.799774] Switching to clocksource gp_timer
- [ 4.801635] [TTY_IO] create tty_wq for smd0
- [ 4.811737] [BATT][tps65200] tps65200_probe
- [ 4.811920] [BATT][tps65200] not HV battery.
- [ 4.812011] [BATT][tps65200] init chg_int interrupt.
- [ 4.812042] [BATT][tps65200] To init delay workqueue to kick tps watchdog!
- [ 4.813323] [BATT][tps65200] Set VDPM as 4.76V: regh 0x03=87
- [ 4.813354] [BATT][tps65200] [TPS65200]: Driver registration done
- [ 4.813629] NET: Registered protocol family 2
- [ 4.813812] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
- [ 4.814270] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- [ 4.814697] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
- [ 4.814971] TCP: Hash tables configured (established 16384 bind 16384)
- [ 4.814971] TCP reno registered
- [ 4.815002] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 4.815032] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 4.815460] NET: Registered protocol family 1
- [ 4.815795] Unpacking initramfs...
- [ 4.865692] Freeing initrd memory: 544K
- [ 4.865844] PMU: registered new PMU device of type 0
- [ 4.867736] msm_smd_probe(): get msm_smd_debug_mask=0xc
- [ 4.867767] [SMD] smd probe
- [ 4.867950] [SMD] smd_core_init()
- [ 4.868164] [SMD] smd_alloc_channel() 'DS' cid=0 size=08192, [Stream mode]
- [ 4.868377] [SMD] smd_alloc_channel() 'DIAG' cid=1 size=08192, [Package mode]
- [ 4.868530] [SMD] smd_alloc_channel() 'RPCCALL' cid=2 size=08192, [Stream mode]
- [ 4.868652] [SMD] smd_alloc_channel() 'DATA1' cid=7 size=08192, [Package mode]
- [ 4.868804] [SMD] smd_alloc_channel() 'DATA2' cid=8 size=08192, [Package mode]
- [ 4.868957] [SMD] smd_alloc_channel() 'DATA3' cid=9 size=08192, [Package mode]
- [ 4.869079] [SMD] smd_alloc_channel() 'DATA4' cid=10 size=08192, [Package mode]
- [ 4.869232] [SMD] smd_alloc_channel() 'DATA5' cid=11 size=32768, [Package mode]
- [ 4.869384] [SMD] smd_alloc_channel() 'DATA6' cid=12 size=08192, [Package mode]
- [ 4.869506] [SMD] smd_alloc_channel() 'DATA7' cid=13 size=08192, [Package mode]
- [ 4.869659] [SMD] smd_alloc_channel() 'DATA11' cid=17 size=08192, [Package mode]
- [ 4.869812] [SMD] smd_alloc_channel() 'GPSNMEA' cid=27 size=08192, [Package mode]
- [ 4.869964] Notify: smsm init
- [ 4.870574] [SMD] smd_alloc_channel() 'DAL00' cid=38 size=08192, [Stream mode]
- [ 4.870758] [SMD] smd_alloc_channel() 'DATA5_CNTL' cid=39 size=01024, [Package mode]
- [ 4.870910] [SMD] smd_alloc_channel() 'DATA6_CNTL' cid=40 size=01024, [Package mode]
- [ 4.871032] [SMD] smd_alloc_channel() 'DATA7_CNTL' cid=41 size=01024, [Package mode]
- [ 4.871185] [SMD] smd_alloc_channel() 'DATA40' cid=42 size=08192, [Package mode]
- [ 4.871337] [SMD] smd_alloc_channel() 'DATA40_CNTL' cid=43 size=01024, [Package mode]
- [ 4.871490] [SMD] smd_core_init() done
- [ 4.871520] [SMD] smd_alloc_loopback_channel: 'local_loopback' cid=100
- [ 4.875335] [SMD] SMD: ch 2 0 -> 1, state: 0
- [ 4.875549] [SMD] SMD: ch 2 1 -> 2, state: 1
- [ 4.875549] rpcrouter_smd_remote_notify: smd opened 0x (null)
- [ 4.887878] [K] htcdrm_init(1, swapper): register module ok
- [ 4.887878]
- [ 4.889160] [adsp.c:adsp_init] msm_adsp -- 0
- [ 4.898834] [audpp.c:audpp_probe] Number of decoder supported 5
- [ 4.898864] [audpp.c:audpp_probe] Number of concurrency supported 8
- [ 4.898895] [audpp.c:audpp_probe] module_name:AUDPLAY0TASK
- [ 4.898895] [audpp.c:audpp_probe] queueid:13
- [ 4.898925] [audpp.c:audpp_probe] decid:0
- [ 4.898925] [audpp.c:audpp_probe] nr_codec_support:11
- [ 4.898956] [audpp.c:audpp_probe] module_name:AUDPLAY1TASK
- [ 4.898956] [audpp.c:audpp_probe] queueid:14
- [ 4.898986] [audpp.c:audpp_probe] decid:1
- [ 4.898986] [audpp.c:audpp_probe] nr_codec_support:11
- [ 4.899017] [audpp.c:audpp_probe] module_name:AUDPLAY2TASK
- [ 4.899047] [audpp.c:audpp_probe] queueid:15
- [ 4.899047] [audpp.c:audpp_probe] decid:2
- [ 4.899078] [audpp.c:audpp_probe] nr_codec_support:11
- [ 4.899078] [audpp.c:audpp_probe] module_name:AUDPLAY3TASK
- [ 4.899108] [audpp.c:audpp_probe] queueid:16
- [ 4.899108] [audpp.c:audpp_probe] decid:3
- [ 4.899139] [audpp.c:audpp_probe] nr_codec_support:11
- [ 4.899139] [audpp.c:audpp_probe] module_name:AUDPLAY4TASK
- [ 4.899169] [audpp.c:audpp_probe] queueid:17
- [ 4.899169] [audpp.c:audpp_probe] decid:4
- [ 4.899200] [audpp.c:audpp_probe] nr_codec_support:1
- [ 4.900604] [K] __msm_rpc_connect: server not found 30000002:20001
- [ 4.903778] [K] dma_test_init, minor number 31
- [ 4.904113] [HS_MGR] (headset_notifier_register) Register MIC_BIAS notifier
- [ 4.904113] [HS_MGR] (headset_notifier_update) HS_MGR driver is not ready
- [ 4.914855] [BATT] M2A_RPC: set_charging: 0 at 215026817 (1970-01-01 00:00:00.214996318 UTC)
- [ 4.914916] [BATT][tps65200] Switch charger OFF
- [ 4.940460] [BATT] M2A_RPC: set_charging: 1 at 240616408 (1970-01-01 00:00:00.240585912 UTC)
- [ 4.942291] [BATT][tps65200] regh 0x00=28, regh 0x01=29, regh 0x02=63, regh 0x03=87
- [ 4.943542] [BATT][tps65200] regh 0x04=50, 0x05=ff, regh 0x06=23
- [ 4.945220] [BATT][tps65200] regh 0x07=4, 0x08=0, regh 0x09=0, regh 0x0A=0
- [ 4.946899] [BATT][tps65200] regh 0x0B=bf, 0x0C=7f, regh 0x0D=ff, regh 0x0E=32
- [ 4.949798] [BATT][tps65200] Switch charger ON (FAST): regh 0x01=29, regh 0x00=2a, regh 0x03=87, regh 0x02=a3
- [ 4.950500] [BATT] M2A_RPC: cable_update: USB at 250619271 (1970-01-01 00:00:00.250619271 UTC)
- [ 4.950531] [BATT] htc_cable_status_update: 0 -> 1
- [ 4.950561] [USBH] msm_otg_set_vbus_state: 1
- [ 4.950561] [USBH] OTG does not probe yet
- [ 4.951110] [BATT] A2M_RPC: get_batt_info: batt_id=1, batt_vol=4207, batt_temp=252, batt_current=0, level=100, charging_source=1, charging_enabled=1, full_bat=1200000, over_vchg=0 at 251259688 (1970-01-01 00:00:00.251198696 UTC)
- [ 4.951934] htc_wifi_bt_sleep_clk_ctl ON=1, ID=1
- [ 4.951965] EN SLEEP CLK
- [ 4.951965] htc_wifi_bt_sleep_clk_ctl ON=1, ID=1 DONE
- [ 4.958190] [BT]== R OFF ==
- [ 4.958526] htc_sleep_clk_probe, pin=0
- [ 4.958648] [HS_MGR] (htc_headset_mgr_probe) ++++++++++++++++++++
- [ 4.959411] input: h2w headset as /devices/virtual/input/input0
- [ 4.959869] [HS_MGR] (hs_notify_driver_ready) HS_MGR ready
- [ 4.960174] [HS_MGR] (htc_headset_mgr_probe) --------------------
- [ 4.960510] [HS_PMIC] (htc_headset_pmic_probe) ++++++++++++++++++++
- [ 4.960845] [HS_PMIC] (htc_headset_pmic_probe) Register ADC RPC client successfully
- [ 4.960876] [HS_MGR] (headset_notifier_register) Register REMOTE_ADC notifier
- [ 4.960876] [HS_MGR] (headset_notifier_register) Register REMOTE_KEYCODE notifier
- [ 4.960906] [HS_MGR] (headset_notifier_register) Register RPC_KEY notifier
- [ 4.960937] [HS_MGR] (headset_notifier_register) Register MIC_STATUS notifier
- [ 4.960937] [HS_MGR] (hs_notify_driver_ready) HS_PMIC ready
- [ 4.961151] [HS_GPIO] (htc_headset_gpio_probe) ++++++++++++++++++++
- [ 4.961486] [HS_MGR] (headset_notifier_register) Register HPIN_GPIO notifier
- [ 4.961486] [HS_MGR] (hs_notify_driver_ready) HS_GPIO ready
- [ 4.961517] [HS_GPIO] (htc_headset_gpio_probe) --------------------
- [ 4.961547] [HS_PMIC] (htc_headset_pmic_probe) --------------------
- [ 4.963714] ashmem: initialized
- [ 4.964660] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 4.964721] exFAT: Version 1.2.5
- [ 4.964752] NTFS driver 2.1.30 [Flags: R/W].
- [ 4.964904] fuse init (API version 7.16)
- [ 4.965454] yaffs: yaffs built Oct 10 2017 22:37:35 Installing.
- [ 4.965515] msgmni has been set to 821
- [ 4.967193] io scheduler noop registered
- [ 4.967193] io scheduler deadline registered
- [ 4.967285] io scheduler cfq registered (default)
- [ 4.967346] io scheduler bfq registered
- [ 4.967376] BFQ I/O-scheduler version: v7r5
- [ 4.967376] io scheduler row registered
- [ 4.967407] io scheduler sio registered
- [ 4.969146] mipi_dsi base phy_addr = 0xa1100000 virt = 0xddb00000
- [ 4.969299] [DISP] msm_fb_detect_panel: not supported 'mipi_video_novatek_hvga'
- [ 4.969329] [DISP] msm_fb_detect_panel: not supported 'mipi_cmd_novatek_hvga'
- [ 4.969360] panel: mipi_cmd_samsung_hvga
- [ 4.969360] mipi_samsung_lcd_init: SUCCESS (WLED TRIGGER)
- [ 4.969848] setting pdata->panel_info.fb_num to 3. type: 9
- [ 4.970336] [DISP] DSI Single Lane
- [ 4.970367] Changing to DSI Single Mode Configuration
- [ 4.973449] FrameBuffer[0] 320x480 size=1843200 bytes is registered successfully!
- [ 4.973815] Registered led device: lcd-backlight
- [ 4.974365] msm_serial: detected port #0
- [ 4.974487] msm_serial.0: ttyMSM0 at MMIO 0xa9a00000 (irq = 9) is a MSM
- [ 4.980255] msm_serial: driver initialized
- [ 4.980468] msm_serial_hs_init failed to load
- [ 4.980804] [BT]BRCM chip
- [ 4.980987] msm_serial_hs_brcm.0: ttyHS0 at MMIO 0xa0200000 (irq = 45) is a MSM HS UART
- [ 5.008789] [BATT] M2A_RPC: set_charging: 0 at 308898931 (1970-01-01 00:00:00.308868432 UTC)
- [ 5.008850] [BATT][tps65200] Switch charger OFF
- [ 5.010559] [BATT] M2A_RPC: level_update: 100 at 310667856 (1970-01-01 00:00:00.310637356 UTC)
- [ 5.010620] [BATT] power_supply_changed: battery at 310698355 (1970-01-01 00:00:00.310698355 UTC)
- [ 5.010925] [BT]msm_serial_hs module loaded
- [ 5.011199] [BT]msm_serial_hs_init failed to load
- [ 5.013183] [SMD] SMD: ch 38 0 -> 1, state: 0
- [ 5.013336] [SMD] SMD: ch 38 1 -> 2, state: 1
- [ 5.014099] [SMD] smd_close(DAL00)+
- [ 5.014129] [SMD] smd_close(DAL00)-
- [ 5.014312] [SMD] SMD: ch 38 2 -> 4, state: 0
- [ 5.014526] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
- [ 5.019653] loop: module loaded
- [ 5.020538] zram: Created 1 device(s) ...
- [ 5.020721] pmem: Initializing pmem_adsp (user-space) as cached
- [ 5.020996] pmem_setup: allocating PMEM region from system memory.
- [ 5.021057] allocating 16777216 bytes at (null) (2ec3a000 physical) for pmem_adsp
- [ 5.021240] fsynccontrol_init misc_register(fsynccontrol)
- [ 5.021514] bln_control_init misc_register(backlightnotification)
- [ 5.022277] SCSI Media Changer driver v0.25
- [ 5.023010] msm_nand_probe: phys addr 0xa0a00000
- [ 5.023010] msm_nand_probe: Dual Nand Ctrl in ping-pong mode
- [ 5.023040] msm_nand_probe: dmac 0x7
- [ 5.023101] msm_nand_probe: allocated dma buffer at ffdf8000, dma_addr 2d37e000
- [ 5.023376] ONFI probe : Found a nonONFI Compliant device
- [ 5.023437] status: c00020
- [ 5.023468] nandid: 6600bcec maker ec device bc
- [ 5.023498] Found a supported NAND device
- [ 5.023529] NAND Id : 0x6600bcec
- [ 5.023529] Buswidth : 16 Bits
- [ 5.023559] Density : 512 MByte
- [ 5.023559] Pagesize : 4096 Bytes
- [ 5.023590] Erasesize: 262144 Bytes
- [ 5.023590] Oobsize : 128 Bytes
- [ 5.023590] CFG0 Init : 0xa85409c0
- [ 5.023620] CFG1 Init : 0x0004645e
- [ 5.023620] ECCBUFCFG : 0x00000203
- [ 5.023651] Creating 7 MTD partitions on "msm_nand":
- [ 5.023681] 0x0000038c0000-0x0000039c0000 : "misc"
- [ 5.024993] 0x000002fc0000-0x0000034c0000 : "recovery"
- [ 5.026123] 0x0000034c0000-0x0000038c0000 : "boot"
- [ 5.027343] 0x0000060c0000-0x000020000000 : "system"
- [ 5.028503] 0x0000058c0000-0x0000060c0000 : "cache"
- [ 5.029724] 0x000003ac0000-0x0000058c0000 : "userdata"
- [ 5.030914] 0x0000039c0000-0x000003ac0000 : "devlog"
- [ 5.032196] [PPP] ppp_init disable ppp debug msg
- [ 5.032226] PPP generic driver version 2.4.2
- [ 5.032531] PPP Deflate Compression module registered
- [ 5.032562] PPP BSD Compression module registered
- [ 5.033508] PPP MPPE Compression module registered
- [ 5.033538] NET: Registered protocol family 24
- [ 5.033599] tun: Universal TUN/TAP device driver, 1.6
- [ 5.033630] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 5.033996] [RMNTSMD] rmnet_init: SMD devices[8]
- [ 5.039398] [USB] msm_hsusb_rpc_connect: rpc connect success vers = 10001
- [ 5.039428] [USB] msm_otg_probe: rpc_connect(0)
- [ 5.040313] [USB] msm72k_probe
- [ 5.040649] [USB] peripheral driver registered w/ tranceiver
- [ 5.040710] [USBH] msm_otg_sm_work: state:UNDEFINED bit:0x00000000
- [ 5.040710] [USBH] otg_reset
- [ 5.041717] [USB] android_init_functions rndis init
- [ 5.042205] [USB] android_init_functions accessory init
- [ 5.042755] [USB] android_init_functions mtp init
- [ 5.042907] [USB] android_init_functions ptp init
- [ 5.043212] android_usb gadget: Mass Storage Function, version: 2009/09/11
- [ 5.043243] android_usb gadget: Number of LUNs=1
- [ 5.043273] lun0: LUN: removable file: (no medium)
- [ 5.043334] [USB] android_init_functions mass_storage init
- [ 5.043701] [USB] android_init_functions adb init
- [ 5.043853] [USB] android_init_functions diag init
- [ 5.043975] [USB] android_init_functions modem init
- [ 5.044128] [USB] android_init_functions serial init
- [ 5.044281] android_usb gadget: android_usb ready
- [ 5.044342] [USB] registered gadget driver 'android_usb'
- [ 5.044525] [USBDIAG] diagfwd initializing ..
- [ 5.044555] [USBDIAG] wcnss channel was not enabled in the platform
- [ 5.044769] [USB] usb_diag_open: name: diag
- [ 5.045257] [USBDIAG] usb_diag_open: ch->name:diag ctxt:c0927940 pkts_pending:c09279dc
- [ 5.045379] [SMD] SMD: ch 1 0 -> 1, state: 0
- [ 5.045410] [USBDIAG] diag_smd_probe: smd_open(DIAG):0, ch_temp:da561a00, driver->ch:da561a00, &driver->ch:da7fe8d0
- [ 5.045532] [SMD] SMD: ch 1 1 -> 2, state: 1
- [ 5.045837] [USBDIAG] CNTL channel was not enabled in the platform
- [ 5.046142] [USBDIAG] diagchar initialized
- [ 5.046417] cy8c_ts_init: enter
- [ 5.046539] pico_ts_himax_power():
- [ 5.270172] [USBH] otg_reset: mode:0x00000013
- [ 5.270202] [USBH] is_b_sess_vld: htc_otg_vbus:1, otgsc_bsv:1
- [ 5.270233] [USBH] msm_otg_sm_work: state:b_idle bit:0x00002020
- [ 5.270263] [USB] b_sess_vld
- [ 5.270263] [USB] Charging with 0mA current
- [ 5.270294] [USB] msm_hsusb_set_vbus_state: 1
- [ 5.270324] [USB] pm_runtime: resuming...
- [ 5.270324] [USB] msm72k_udc: OFFLINE -> ONLINE
- [ 5.270355] [USB] reset controller
- [ 5.270355] [USBH] otg_reset
- [ 5.338958] pico_ts_himax_loadSensorConfig: Wintek touch window detected.
- [ 5.338989] [TS]pico_ts_himax_loadSensorConfig: start initializing Sensor configs
- [ 5.480407] 0x31=> 0x85 0x26 0x00 FW ver:0x0A
- [ 5.481109] input_set_abs_params: mix_x 0, max_x 1024, min_y 0, max_y 910
- [ 5.481445] input: himax-touchscreen as /devices/virtual/input/input1
- [ 5.481842] himax8526a_probe: irq enabled at qpio: 82
- [ 5.482055] gpio_request(20) <power_key> failed: -16
- [ 5.482086] pico_direct_inputs_gpio: unable to enable gpios for matirx_inputs_gpio_table
- [ 5.482147] [KEY] gpio_event_input_irq_handler, irq=84, use_irq=0
- [ 5.482208] [KEY] gpio_event_input_irq_handler, irq=112, use_irq=0
- [ 5.482269] [KEY] gpio_event_input_irq_handler, irq=156, use_irq=0
- [ 5.482330] [KEY] GPIO Input Driver: Start gpio inputs for pico-keypad in interrupt mode
- [ 5.482666] input: pico-keypad as /devices/virtual/input/input2
- [ 5.483612] [KEY] Ship code, disable key reset.
- [ 5.487060] using rtc device, msm_rtc, for alarms
- [ 5.487152] rs30000048 rs30000048.262144: rtc core: registered msm_rtc as rtc0
- [ 5.487426] [KEY] gpio_keys_scan_keys: key 1-74, 0 (20) changed to 0
- [ 5.487457] [KEY] gpio_keys_scan_keys: key 1-72, 1 (48) changed to 0
- [ 5.487457] [KEY] gpio_keys_scan_keys: key 1-73, 2 (92) changed to 0
- [ 5.488067] rs30000048 rs30000048.262144: rtc core: registered msm_rtc_secure as rtc1
- [ 5.488159] i2c /dev entries driver
- [ 5.488647] [GSNR][BMA250 NO_COMP] BMA250 G-sensor driver: init
- [ 5.488708] [GSNR][BMA250 NO_COMP] BMA250 G-sensor I2C driver: gs_kvalue = 0x67EC0301
- [ 5.489196] [GSNR][BMA250 NO_COMP] bma250_probe: CHIP ID = 0x03
- [ 5.489746] [GSNR][BMA250 NO_COMP] BMA_Init: bma250_RANGE_SEL_REG++: range = 0x03, bw = 0x1f
- [ 5.490936] [GSNR][BMA250 NO_COMP] BMA_Init: bma250_RANGE_SEL_REG--: range = 0x03, bw = 0x0a
- [ 5.491638] input: compass as /devices/virtual/input/input3
- [ 5.492095] [GSNR][BMA250 NO_COMP] bma250_probe: BMA250_NO_COMP: I2C retry 10 times version. OK
- [ 5.492156] i2c-core: driver [bma250_no_ecmps] using legacy suspend method
- [ 5.492187] i2c-core: driver [bma250_no_ecmps] using legacy resume method
- [ 5.492248] [PS][CM3628] cm3628_probe
- [ 5.492248] [PS][CM3628] cm3628_probe: is_cmd 0xd0, ps_adc_offset=0x3, ps_debounce=0x0
- [ 5.492553] input: lightsensor-level as /devices/virtual/input/input4
- [ 5.493194] input: proximity as /devices/virtual/input/input5
- [ 5.493591] [LS][CM3628] lightsensor_set_kvalue: ALS calibrated als_kadc=0x6da50344
- [ 5.493621] [LS][CM3628] lightsensor_set_kvalue: als_kadc=0x344, als_gadc=0x378
- [ 5.493652] [LS][CM3628] lightsensor_update_table: Calibrated adc_table: data[0], 0
- [ 5.493682] [LS][CM3628] lightsensor_update_table: Calibrated adc_table: data[1], 2
- [ 5.493682] [LS][CM3628] lightsensor_update_table: Calibrated adc_table: data[2], 4
- [ 5.493713] [LS][CM3628] lightsensor_update_table: Calibrated adc_table: data[3], 10
- [ 5.493743] [LS][CM3628] lightsensor_update_table: Calibrated adc_table: data[4], 1b
- [ 5.493774] [LS][CM3628] lightsensor_update_table: Calibrated adc_table: data[5], 2a0
- [ 5.493774] [LS][CM3628] lightsensor_update_table: Calibrated adc_table: data[6], 486
- [ 5.493804] [LS][CM3628] lightsensor_update_table: Calibrated adc_table: data[7], 581
- [ 5.493835] [LS][CM3628] lightsensor_update_table: Calibrated adc_table: data[8], 67a
- [ 5.493835] [LS][CM3628] lightsensor_update_table: Calibrated adc_table: data[9], ffff
- [ 5.494018] [PS][CM3628] psensor_set_kvalue: PS calibrated ps_kparam1 = 0x50530306, ps_kparam2 = 0xffff0a0f
- [ 5.494049] [PS][CM3628] psensor_set_kvalue: PS calibrated inte_cancel_set = 0xf
- [ 5.500335] [USBH] otg_reset: mode:0x00000012
- [ 5.500366] [USB] ulpi: write 0x2c to 0x31
- [ 5.500396] [USB] ulpi: write 0x08 to 0x32
- [ 5.500396] [USB] ulpi: write 0x1d to 0x0d
- [ 5.500427] [USB] ulpi: write 0x1d to 0x10
- [ 5.500427] [USB] usb: notify offline
- [ 5.510131] [PS][CM3628] initial_cm3628, INTERRUPT GPIO val = 1
- [ 5.532958] [PS][CM3628] psensor_initial_cmd, finish
- [ 5.533721] [PS][CM3628] cm3628_probe: Probe success!
- [ 5.533813] Linux video capture interface: v2.00
- [ 5.534088] pico_camera_vreg_config 1
- [ 5.604827] [CAM] i2c probe ok
- [ 5.650848] [CAM] mt9t013 model_id = 0x2600
- [ 5.717254] [CAM] mt9t013 sensor probe done
- [ 5.717285] [CAM] mt9t013:kobject creat and add
- [ 5.717315] [CAM] mt9t013:sysfs_create_file
- [ 5.717346] pico_camera_vreg_config 0
- [ 5.729370] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
- [ 5.729431] Bluetooth: HCI UART driver ver 2.2
- [ 5.729461] Bluetooth: HCI H4 protocol initialized
- [ 5.729461] Bluetooth: HCILL protocol initialized
- [ 5.736419] msm_sdcc_setup_vreg: Enabling SD slot power
- [ 5.736877] mmc0: Qualcomm MSM SDCC-core at 0x00000000a0400000 irq 24,102 dma 8 dmacrcri 6
- [ 5.736907] mmc0: Platform slot type: SD
- [ 5.736907] mmc0: 8 bit data mode disabled
- [ 5.736938] mmc0: 4 bit data mode enabled
- [ 5.736938] mmc0: polling status mode disabled
- [ 5.736968] mmc0: MMC clock 144000 -> 50000000 Hz, PCLK 100000000 Hz
- [ 5.736968] mmc0: Slot eject status = 0
- [ 5.736999] mmc0: Power save feature enable = 1
- [ 5.737030] mmc0: DM non-cached buffer at ffdc0000, dma_addr 0x2c900000
- [ 5.737030] mmc0: DM cmd busaddr 0x2c900000, cmdptr busaddr 0x2c917f40
- [ 5.737884] mmc1: Qualcomm MSM SDCC-core at 0x00000000a0500000 irq 26,0 dma 8 dmacrcri 7
- [ 5.737915] mmc1: Platform slot type: Unknown type
- [ 5.737945] mmc1: 8 bit data mode disabled
- [ 5.737945] mmc1: 4 bit data mode enabled
- [ 5.737976] mmc1: polling status mode disabled
- [ 5.737976] mmc1: MMC clock 400000 -> 50000000 Hz, PCLK 100000000 Hz
- [ 5.738006] mmc1: Slot eject status = 1
- [ 5.738006] mmc1: Power save feature enable = 1
- [ 5.738037] mmc1: DM non-cached buffer at ffd60000, dma_addr 0x2c920000
- [ 5.738067] mmc1: DM cmd busaddr 0x2c920000, cmdptr busaddr 0x2c937f40
- [ 5.738586] Registered led device: button-backlight
- [ 5.739776] usbcore: registered new interface driver usbhid
- [ 5.739807] usbhid: USB HID core driver
- [ 5.740783] logger: created 96K log 'log_main'
- [ 5.740997] logger: created 32K log 'log_events'
- [ 5.741210] logger: created 32K log 'log_radio'
- [ 5.741424] logger: created 96K log 'log_system'
- [ 5.743286] [K] __msm_rpc_connect: server not found 30000002:20001
- [ 5.743316] msm_snd_rpc_connect failed (compatible VERS = 131073) trying again with another API
- [ 5.743347] ALSA device list:
- [ 5.743347] No soundcards found.
- [ 5.743469] GACT probability NOT on
- [ 5.743499] Mirror/redirect action on
- [ 5.743499] u32 classifier
- [ 5.743530] Actions configured
- [ 5.743560] Netfilter messages via NETLINK v0.30.
- [ 5.743652] nf_conntrack version 0.5.0 (6569 buckets, 26276 max)
- [ 5.744140] ctnetlink v0.93: registering with nfnetlink.
- [ 5.744201] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- [ 5.744232] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- [ 5.745025] xt_time: kernel timezone is -0000
- [ 5.745300] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 5.745605] arp_tables: (C) 2002 David S. Miller
- [ 5.745697] TCP cubic registered
- [ 5.745727] Initializing XFRM netlink socket
- [ 5.746002] NET: Registered protocol family 10
- [ 5.748596] Mobile IPv6
- [ 5.748657] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 5.748901] IPv6 over IPv4 tunneling driver
- [ 5.749816] NET: Registered protocol family 17
- [ 5.749877] NET: Registered protocol family 15
- [ 5.750152] Bluetooth: RFCOMM TTY layer initialized
- [ 5.750305] Bluetooth: RFCOMM socket layer initialized
- [ 5.750335] Bluetooth: RFCOMM ver 1.11
- [ 5.750335] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 5.750366] Bluetooth: BNEP filters: protocol multicast
- [ 5.750366] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 5.750549] ######## bthid_init: ########
- [ 5.750946] ######## bthid_init: done ########
- [ 5.750976] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
- [ 5.751007] ThumbEE CPU extension supported.
- [ 5.754089] clock_late_init() disabled 29 unused clocks
- [ 5.754486] [K][Port list] init()
- [ 5.754516] [K][Port list] Virtual Address for port_list: [fa1626c8]
- [ 5.754547] [K][Port list] Physical Address for port_list: [1626C8]
- [ 5.755554] [SMD] SMD: ch 38 0 -> 1, state: 0
- [ 5.755737] [SMD] SMD: ch 38 1 -> 2, state: 1
- [ 5.756195] [SMD] smd_close(DAL00)+
- [ 5.756195] [SMD] smd_close(DAL00)-
- [ 5.756317] [SMD] SMD: ch 38 2 -> 4, state: 0
- [ 5.756347] [K] dalrpc_port_init() failed to open port
- [ 5.756439] [K] daldevice_attach: could not open port
- [ 5.756439] [audio_acdb.c:initialize_rpc] ACDB=> Device Attach failed
- [ 5.845153] mmc0: host does not support reading read-only switch. assuming write-enable.
- [ 5.850616] mmc0: new high speed SDHC card at address 0007
- [ 5.851074] mmcblk0: mmc0:0007 SD08G 7.42 GiB
- [ 5.852630] mmcblk0: p1 p2 p3
- [ 6.040313] [USB] android_enable_function: mass_storage enabled
- [ 6.040344] [USB] android_enable_function: adb enabled
- [ 6.040374] [USB] android_bind_enabled_functions bind name: mass_storage
- [ 6.040405] [USB] android_bind_enabled_functions bind name: adb
- [ 6.040435] adb_bind_config
- [ 6.040496] [USB] msm72k_pullup_internal: 1
- [ 6.040496] [USB] android_usb_init_work: ret: 0
- [ 6.043518] [USB] suspend
- [ 6.174255] [USB] reset
- [ 6.174285] [USBH] chg_type: __INVALID CONNECT_NONE => CONNECT_USB
- [ 6.174346] [USBH] send connect type 1
- [ 6.174346] [TS]Touch: cable change to 1
- [ 6.174957] [TS]himax_cable_tp_status_handler_func: Cable status change: 0x01
- [ 6.174987] [BATT] peripheral_cable_update(1) from_owe=0
- [ 6.175018] [BATT] Update SMEM: cable type 1 at 1474712581 (1970-01-01 00:00:01.474712581 UTC)
- [ 6.176544] [USB] IRQ state: b_peripheral, otgsc = 0x002e0e00
- [ 6.176574] [USB] portchange USB_SPEED_HIGH
- [ 6.292877] [USB] USB_STATE=CONNECTED
- [ 6.296417] [USB] reset
- [ 6.296447] [USBH] chg_type: __SDP CONNECT_USB => CONNECT_USB
- [ 6.298706] [USB] IRQ state: b_peripheral, otgsc = 0x00200e00
- [ 6.298706] [USB] portsc = 88000a05
- [ 6.298736] [USB] portchange USB_SPEED_HIGH
- [ 6.442230] android_usb gadget: high speed config #1: android
- [ 6.442260] [USB] ept 1 in enabled
- [ 6.442291] [USB] ept 1 out enabled
- [ 6.442321] [USB] ept 2 in enabled
- [ 6.442321] [USB] ept 2 out enabled
- [ 6.442504] [USB] Charging with 500mA current
- [ 6.442535] [USB] USB_STATE=CONFIGURED
- [ 6.442596] [USB] set usb_connect2pc = 1
- [ 6.500396] [USB] Charging with 500mA current
- [ 6.500427] [USBH] chg_type: __SDP CONNECT_USB => CONNECT_UNKNOWN
- [ 8.807586] UKSM: relative memcmp_cost = 2099 hash=1576479938 cmp_ret=0.
- [ 8.818664] ## wifi_probe
- [ 8.818695] wifi_set_power = 1
- [ 8.818725] pico_wifi_power: 1
- [ 8.818939] htc_wifi_bt_sleep_clk_ctl ON=1, ID=0
- [ 8.818969] EN SLEEP CLK
- [ 8.818969] htc_wifi_bt_sleep_clk_ctl ON=1, ID=0 DONE
- [ 8.939758] wifi_set_carddetect = 1
- [ 8.939788] pico_wifi_set_carddetect: 1
- [ 8.939788] mmc1: Slot status change detected (0 -> 1)
- [ 8.940246]
- [ 8.940246] Dongle Host Driver, version 5.90.195.114
- [ 8.940246] Compiled in drivers/net/wireless/bcmdhd on Oct 10 2017 at 22:51:09
- [ 8.986175] mmc1: new high speed SDIO card at address 0001
- [ 8.987518] F1 signature read @0x18000000=0x16044330
- [ 8.992248] DHD: dongle ram size is set to 294912(orig 294912)
- [ 8.993225] wl_create_event_handler thr:62 started
- [ 8.994506] p2p0: P2P Interface Registered
- [ 8.994689] dhd_attach thr:63 started
- [ 8.994812] dhd_attach thr:64 started
- [ 8.994903] dhd_attach thr:65 started
- [ 8.994964] dhd_attach thr:66 started
- [ 8.995208] pico_wifi_get_mac_addr = 18 87 96 f0 1b 49
- [ 8.996124] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
- [ 8.996185] wifi_set_power = 0
- [ 8.996185] pico_wifi_power: 0
- [ 8.996398] htc_wifi_bt_sleep_clk_ctl ON=0, ID=0
- [ 8.996429] DIS SLEEP CLK
- [ 8.996429] htc_wifi_bt_sleep_clk_ctl ON=0, ID=0 DONE
- [ 9.117370] =========== WLAN placed in RESET ========
- [ 9.118255] rs30000048 rs30000048.262144: setting system clock to 1980-01-29 06:37:10 UTC (317975830)
- [ 9.118652] Acquire 'boot-time' no_halt_lock 60s
- [ 9.118927] Warning: unable to open an initial console.
- [ 9.119384] Freeing init memory: 216K
- [ 11.951538] [BATT] M2A_RPC: set_charging: 1 at 7250536344 (1980-01-29 06:37:13.332699603 UTC)
- [ 11.953552] [BATT][tps65200] regh 0x00=28, regh 0x01=29, regh 0x02=a3, regh 0x03=87
- [ 11.954833] [BATT][tps65200] regh 0x04=50, 0x05=ff, regh 0x06=23
- [ 11.956512] [BATT][tps65200] regh 0x07=4, 0x08=0, regh 0x09=0, regh 0x0A=0
- [ 11.958160] [BATT][tps65200] regh 0x0B=bf, 0x0C=7f, regh 0x0D=ff, regh 0x0E=32
- [ 11.961212] [BATT][tps65200] Switch charger ON (FAST): regh 0x01=29, regh 0x00=2a, regh 0x03=87, regh 0x02=a3
- [ 12.162597] [BATT][tps65200] Set VDPM back to original V: regh 0x03=83
- [ 13.108978] [USB] store_file: "/dev/mmcblk0
- [ 13.109008] " to lun0
- [ 13.110076] [USB] enable_store, buff: 0
- [ 13.110717] [USB] htc_usb_enable_function: 'adb' is already enabled
- [ 13.110748] [USB] enable_store, buff: 1
- [ 13.614288] [USB] enable_store, buff: 0
- [ 13.614746] [USB] idVendor_store: 18D1
- [ 13.615112] [USB] idProduct_store: D001
- [ 13.615447] [USB] iManufacturer_store: Mer Boat Loader
- [ 13.615814] [USB] iProduct_store: Refusing
- [ 13.616180] [USB] iSerial_store: Mer Debug setting up (DONE_SWITCH=no)
- [ 13.616546] [USB] functions_store: buff: rndis,mass_storage
- [ 13.616912] [USB] htc_usb_enable_function: 'adb' is already enabled
- [ 13.616912] [USB] enable_store, buff: 1
- [ 13.682434] vfs_fsync++
- [ 13.682495] vfs_fsync--
- [ 13.746948] vfs_fsync++
- [ 13.747009] vfs_fsync--
- [ 14.018554] vfs_fsync++
- [ 14.018585] vfs_fsync--
- [ 14.654296] [USB] iSerial_store: Mer Debug: ERROR: could not setup USB as usb0 or rndis0
- [ 14.981109] [HS_GPIO] (irq_init_work_func) Enable detect IRQ
- [ 14.981170] [HS_GPIO] (irq_init_work_func) Enable button IRQ
- [ 34.938842] [BATT] M2A_RPC: set_charging: 1 at 30237839169 (1980-01-29 06:37:36.320032945 UTC)
- [ 34.940734] [BATT][tps65200] regh 0x00=2a, regh 0x01=29, regh 0x02=a3, regh 0x03=83
- [ 34.942047] [BATT][tps65200] regh 0x04=50, 0x05=ff, regh 0x06=27
- [ 34.943786] [BATT][tps65200] regh 0x07=4, 0x08=0, regh 0x09=0, regh 0x0A=0
- [ 34.945526] [BATT][tps65200] regh 0x0B=bf, 0x0C=7f, regh 0x0D=ff, regh 0x0E=32
- [ 34.948608] [BATT][tps65200] Switch charger ON (FAST): regh 0x01=29, regh 0x00=2a, regh 0x03=87, regh 0x02=a3
- [ 35.142395] [BATT][tps65200] Set VDPM back to original V: regh 0x03=83
- [ 69.181121] Release 'boot-time' no_halt_lock
- [ 75.550476] SysRq : Emergency Remount R/O
- [ 75.552520] Emergency Remount complete
- [ 75.557403] [BATT][tps65200] TPS65200 shutdown
- [ 75.559295] [K] reboot(parent:init): Restarting system.
- [ 75.559417] [K] msm_pm_restart: restart_reason 0x77665501, cmd NULL
- [ 75.560272] [K] from msm_pm_restart
- [ 75.560333] wait_rmt_final_call_back: Modem is not up, skip efs_sync
- [ 75.560424] [K] back msm_pm_restart
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement