esphome daly bms akule

esphome:
  name: aku2
  friendly_name: aku 2

esp32:
  board: esp32dev
  framework:
    type: arduino

uart:
    tx_pin: GPIO1
    rx_pin: GPIO3
    baud_rate: 9600

# Enable logging
logger:
  baud_rate: 0

# Enable Home Assistant API
api:
  encryption:
    key: "hIaD/ARLd/dbWN1Xp5q5oWRop7vQpYSg2nxeOhifdFk="

ota:


wifi:
  ssid: Saaremaa_2G
  password: Kuuvalguse1
  manual_ip:
    static_ip: 192.168.2.78
    gateway: 192.168.2.1
    subnet: 255.255.255.0
    dns1: 192.168.2.1

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "aku2"
    password: "12345678"

captive_portal:

daly_bms:
  update_interval: 60s
sensor:


    platform: daly_bms
    voltage:
       name: "Battery Voltage"
    battery_level:
      name: "Battery Level"
    max_cell_voltage:
      name: "Max Cell Voltage"
    max_cell_voltage_number:
      name: "Max Cell Voltage Number"
    min_cell_voltage:
      name: "Min Cell Voltage"
    min_cell_voltage_number:
      name: "Min Cell Voltage Number"
    cells_number:
      name: "Cells Number"
    cell_1_voltage:
      name: "Cell 1 Voltage"
    cell_2_voltage:
      name: "Cell 2 Voltage"
    cell_3_voltage:
      name: "Cell 3 Voltage"
    cell_4_voltage:
      name: "Cell 4 Voltage"
    cell_5_voltage:
      name: "Cell 5 Voltage"
    cell_6_voltage:
      name: "Cell 6 Voltage"
    cell_7_voltage:
      name: "Cell 7 Voltage"
    cell_8_voltage:
      name: "Cell 8 Voltage"
    cell_9_voltage:
      name: "Cell 9 Voltage"
    cell_10_voltage:
      name: "Cell 10 Voltage"
    cell_11_voltage:
      name: "Cell 11 Voltage"
    cell_12_voltage:
      name: "Cell 12 Voltage"
    cell_13_voltage:
      name: "Cell 13 Voltage"
    cell_14_voltage:
      name: "Cell 14 Voltage"
    cell_15_voltage:
      name: "Cell 15 Voltage"
    cell_16_voltage:
      name: "Cell 16 Voltage"