fatspirit

r93 reboots

Oct 8th, 2016
25
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [ 0.000000] Booting Linux on physical CPU 0
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Linux version 3.4.0-g99666f7 (android-build@vped6.mtv.corp.google.com) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Wed Aug 24 20:12:43 UTC 2016
  4. [ 0.000000] CPU: ARMv7 Processor [512f06f0] revision 0 (ARMv7), cr=10c5387d
  5. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  6. [ 0.000000] Machine: Qualcomm MSM 8974 HAMMERHEAD (Flattened Device Tree), model: LGE MSM 8974 HAMMERHEAD
  7. [ 0.000000] qcom,ion-heap@28 reserved EBI1 size 614000
  8. [ 0.000000] qcom,mdss_fb_primary reserved EBI1 size 1000000
  9. [ 0.000000] qcom,msm-contig-mem reserved EBI1 size 280000
  10. [ 0.000000] Node qcom,msm-mem-hole removed memory 7b00000-ff00000
  11. [ 0.000000] memory pool 3 (start 0x7e700000 size 1900000) initialized
  12. [ 0.000000] PERSIST RAM CONSOLE START ADDR : 0x10000000
  13. [ 0.000000] Initialized persistent memory from 10000000-100fffff
  14. [ 0.000000] cma: CMA: reserved 16 MiB at 36c00000
  15. [ 0.000000] cma: Found secure_region, memory base 0, size 252 MiB
  16. [ 0.000000] cma: CMA: reserved 252 MiB at 6e800000
  17. [ 0.000000] cma: Found adsp_region, memory base 0, size 32 MiB
  18. [ 0.000000] cma: CMA: reserved 32 MiB at 6c800000
  19. [ 0.000000] cma: Found qsecom_region, memory base 0, size 17 MiB
  20. [ 0.000000] cma: CMA: reserved 20 MiB at 6b400000
  21. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  22. [ 0.000000] IMEM DT static mapping successful
  23. [ 0.000000] PERCPU: Embedded 7 pages/cpu @c2403000 s15680 r0 d12992 u32768
  24. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 480000
  25. [ 0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.hardware=hammerhead user_debug=31 maxcpus=2 msm_watchdog_v2.enable=1 uart_console=enable gpt=enable lge.kcal=0|0|0|x lge.rev=rev_11 androidboot.laf androidboot.emmc=true androidboot.serialno=0226e86843a3a63a androidboot.bootloader=HHZ20h androidboot.baseband=msm bootreason=reboot androidboot.hardware.sku=D821 androidboot.hardware.ddr=elpida androidboot.hardware.display=orise androidboot.revision=11
  26. [ 0.000000] UART CONSOLE : enable
  27. [ 0.000000] BOARD : LGE rev_11
  28. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  29. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  30. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  31. [ 0.000000] Memory: 123MB 1768MB = 1891MB total
  32. [ 0.000000] Memory: 1570676k/1570676k available, 391308k reserved, 846848K highmem
  33. [ 0.000000] Virtual kernel memory layout:
  34. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  35. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  36. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  37. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  38. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  39. [ 0.000000] .text : 0xc0008000 - 0xc0f15b6c (15415 kB)
  40. [ 0.000000] .init : 0xc1000000 - 0xc1130d40 (1220 kB)
  41. [ 0.000000] .data : 0xc1132000 - 0xc11ff0e0 ( 821 kB)
  42. [ 0.000000] .bss : 0xc11ff104 - 0xc13b89fc (1767 kB)
  43. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  44. [ 0.000000] Preemptible hierarchical RCU implementation.
  45. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  46. [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
  47. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  48. [ 0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696ms
  49. [ 0.000000] Switching to timer-based delay loop
  50. [ 0.000000] Console: colour dummy device 80x30
  51. [ 0.000088] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  52. [ 0.000110] pid_max: default: 32768 minimum: 301
  53. [ 0.000276] Security Framework initialized
  54. [ 0.000302] SELinux: Initializing.
  55. [ 0.000433] Mount-cache hash table entries: 512
  56. [ 0.001278] Initializing cgroup subsys debug
  57. [ 0.001291] Initializing cgroup subsys cpuacct
  58. [ 0.001301] Initializing cgroup subsys freezer
  59. [ 0.001345] CPU: Testing write buffer coherency: ok
  60. [ 0.001380] ftrace: allocating 30791 entries in 91 pages
  61. [ 0.113062] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  62. [ 0.113860] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
  63. [ 0.116896] Setting up static identity map for 0xa6c1f0 - 0xa6c278
  64. [ 0.116912] MSM Memory Dump table set up
  65. [ 0.118404] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  66. [ 0.118485] Brought up 2 CPUs
  67. [ 0.118496] SMP: Total of 2 processors activated (76.80 BogoMIPS).
  68. [ 0.130297] dummy:
  69. [ 0.142651] NET: Registered protocol family 16
  70. [ 0.145140] DMA: preallocated 256 KiB pool for atomic coherent allocations
  71. [ 0.146637] socinfo_print: v8, id=126, ver=2.2, raw_id=1968, raw_ver=7, hw_plat=150, hw_plat_ver=65536
  72. [ 0.146642] accessory_chip=0, hw_plat_subtype=0, pmic_model=65537, pmic_die_revision=196609
  73. [ 0.160770] gpiochip_add: registered GPIOs 0 to 145 on device: msmgpio
  74. [ 0.177004] msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
  75. [ 0.195871] 8841_s1: 675 <--> 1050 mV at 0 mV normal idle
  76. [ 0.196321] 8841_s1_ao: 675 <--> 1050 mV at 0 mV normal idle
  77. [ 0.196780] 8841_s1_so: 675 <--> 1050 mV at 675 mV normal idle
  78. [ 0.197283] 8841_s2: 500 <--> 1050 mV at 0 mV normal idle
  79. [ 0.197734] 8841_s2_corner: 0 <--> 0 mV at 0 mV normal idle
  80. [ 0.198202] 8841_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
  81. [ 0.198645] 8841_s2_floor_corner: 0 <--> 0 mV at 0 mV normal idle
  82. [ 0.199135] 8841_s3: 1050 mV normal idle
  83. [ 0.199613] 8841_s4: 815 <--> 900 mV at 0 mV normal idle
  84. [ 0.200089] 8841_s4_corner: 0 <--> 0 mV at 0 mV normal idle
  85. [ 0.200555] 8841_s4_floor_corner: 0 <--> 0 mV at 0 mV normal idle
  86. [ 0.201036] 8941_s1: 1300 mV normal idle
  87. [ 0.201529] 8941_s2: 2150 mV normal idle
  88. [ 0.202020] 8941_s3: 1800 mV normal idle
  89. [ 0.202517] 8941_l1: 1225 mV normal idle
  90. [ 0.203003] 8941_l2: 1200 mV normal idle
  91. [ 0.203525] 8941_l3: 1225 mV normal idle
  92. [ 0.204015] 8941_l4: 1225 mV normal idle
  93. [ 0.204523] 8941_l5: 1800 mV normal idle
  94. [ 0.205001] 8941_l6: 1800 mV normal idle
  95. [ 0.205483] 8941_l7: 1800 mV normal idle
  96. [ 0.205988] 8941_l8: 1800 mV normal idle
  97. [ 0.206465] 8941_l9: 1800 <--> 2950 mV at 2950 mV normal idle
  98. [ 0.206944] 8941_l10: 1800 <--> 2950 mV at 2950 mV normal idle
  99. [ 0.207422] 8941_l11: 1300 mV normal idle
  100. [ 0.207924] 8941_l12: 1800 mV normal idle
  101. [ 0.208379] 8941_l12_ao: 1800 mV normal idle
  102. [ 0.208859] 8941_l13: 1800 <--> 2950 mV at 2950 mV normal idle
  103. [ 0.209352] 8941_l14: 1800 mV normal idle
  104. [ 0.209831] 8941_l15: 2050 mV normal idle
  105. [ 0.210326] 8941_l16: 2700 mV normal idle
  106. [ 0.210807] 8941_l17: 3000 mV normal idle
  107. [ 0.211304] 8941_l18: 2850 mV normal idle
  108. [ 0.211796] 8941_l19: 3000 <--> 3300 mV at 3300 mV normal idle
  109. [ 0.212281] 8941_l20: 2950 mV normal idle
  110. [ 0.212779] 8941_l21: 2950 mV normal idle
  111. [ 0.213292] 8941_l22: 3000 <--> 3300 mV at 3100 mV normal idle
  112. [ 0.213808] 8941_l23: 3000 mV normal idle
  113. [ 0.214294] 8941_l24: 3075 mV normal idle
  114. [ 0.214782] 8941_lvs1:
  115. [ 0.215211] 8941_lvs2:
  116. [ 0.215659] 8941_lvs3:
  117. [ 0.217717] PDN krait_pdn_phase_scaling_init: eFuse phase scaling factor = 2/4
  118. [ 0.217728] PDN krait_pdn_phase_scaling_init: initial phase scaling factor = 2/4
  119. [ 0.218053] krait0: 500 <--> 1100 mV at 900 mV fast normal idle
  120. [ 0.218592] krait1: 500 <--> 1100 mV at 900 mV fast normal idle
  121. [ 0.219103] krait2: 500 <--> 1100 mV at 900 mV fast normal idle
  122. [ 0.219628] krait3: 500 <--> 1100 mV at 900 mV fast normal idle
  123. [ 0.253008] vdd_restriction_reg_init:Defer vdd rstr freq init
  124. [ 0.253656] persistent_ram: found existing buffer, size 43892, start 43892
  125. [ 0.349625] console [ram-1] enabled
  126. [ 0.349811] persistent_ram: found existing buffer, size 0, start 0
  127. [ 0.350113] wifi: bcm_init_wlan_mem: WIFI MEM Allocated
  128. [ 0.350188] bcm_wifi_init_gpio_mem: wifi gpio and mem initialized
  129. [ 0.350438] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  130. [ 0.350515] hw-breakpoint: maximum watchpoint size is 8 bytes.
  131. [ 0.353966] gpiochip_add: registered GPIOs 1020 to 1023 on device: pm8841-mpp
  132. [ 0.356139] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xd0 incorrect owner 4
  133. [ 0.356360] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xd1 incorrect owner 4
  134. [ 0.356738] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xd4 incorrect owner 4
  135. [ 0.357383] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xdb incorrect owner 2
  136. [ 0.357773] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xde incorrect owner 2
  137. [ 0.358372] gpiochip_add: registered GPIOs 984 to 1019 on device: pm8941-gpio
  138. [ 0.363731] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xa2 incorrect owner 2
  139. [ 0.364397] gpiochip_add: registered GPIOs 977 to 983 on device: pm8941-mpp
  140. [ 0.365953] 8941_boost: 5000 mV
  141. [ 0.366581] 8941_mvs1:
  142. [ 0.366694] 8941_mvs1: supplied by 8941_boost
  143. [ 0.367246] 8941_mvs2:
  144. [ 0.367351] 8941_mvs2: supplied by 8941_boost
  145. [ 0.368365] earjack_debugger_probe: earjack debugger probed
  146. [ 0.370845] qpnp_adcmap_probe: Use adcmap from dt
  147. [ 0.371590] sps:BAM 0xf9984000 (va:0xf0060000) enabled: ver:0x6, number of pipes:20
  148. [ 0.371668] sps:BAM 0xf9984000 is registered.
  149. [ 0.371813] sps:sps is ready.
  150. [ 0.373918] gdsc_venus:
  151. [ 0.374378] gdsc_mdss:
  152. [ 0.374780] gdsc_jpeg:
  153. [ 0.375278] gdsc_vfe:
  154. [ 0.375650] gdsc_oxili_gx:
  155. [ 0.375780] gdsc_oxili_gx: supplied by 8841_s4_corner
  156. [ 0.376410] gdsc_oxili_cx:
  157. [ 0.376825] gdsc_usb_hsic:
  158. [ 0.377477] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  159. [ 0.383813] msm_ocmem fdd00000.qcom,ocmem: OCMEM Virtual addr f0400000
  160. [ 0.385615] Physical OCMEM zone layout:
  161. [ 0.385706] zone graphics : 0xfec00000 - 0xfecfffff (1024 KB)
  162. [ 0.385840] zone lp_audio : 0xfed00000 - 0xfed7ffff ( 512 KB)
  163. [ 0.385917] zone video : 0xfed00000 - 0xfed7ffff ( 512 KB)
  164. [ 0.411757] bio: create slab <bio-0> at 0
  165. [ 0.412753] ethernet_phy:
  166. [ 0.413289] avdd-3p3:
  167. [ 0.413694] vdd-1p0:
  168. [ 0.414587] cma: Assigned CMA region at 0 to 8.qcom,ion-heap device
  169. [ 0.414791] ION-heap mm: Cannot specify alignment for this type of heap
  170. [ 0.414941] cma: Assigned CMA region at 0 to 16.qcom,ion-heap device
  171. [ 0.415141] ION-heap adsp: Cannot specify alignment for this type of heap
  172. [ 0.415422] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
  173. [ 0.415866] ION heap vmalloc created
  174. [ 0.416042] ION heap kmalloc created
  175. [ 0.416132] ION heap mm created
  176. [ 0.416282] ION heap adsp created
  177. [ 0.416373] ION heap iommu created
  178. [ 0.416462] ION heap qsecom created
  179. [ 0.416628] ION heap audio created at 0x7e701000 with size 614000
  180. [ 0.417942] SCSI subsystem initialized
  181. [ 0.418133] usbcore: registered new interface driver usbfs
  182. [ 0.418330] usbcore: registered new interface driver hub
  183. [ 0.418500] usbcore: registered new device driver usb
  184. [ 0.419507] Linux media interface: v0.10
  185. [ 0.419625] Linux video capture interface: v2.00
  186. [ 0.420452] PMIC@SID0 Power-on reason: Triggered from Hard Reset
  187. [ 0.420539] PMIC@SID0: Power-off reason: Triggered from KPDPWR_AND_RESIN(Simultaneous power key and reset line)
  188. [ 0.420880] input: qpnp_pon as /devices/virtual/input/input0
  189. [ 0.423284] msm_iommu_v1 fda64000.qcom,iommu: device jpeg_iommu mapped at f01e0000, with 3 ctx banks
  190. [ 0.424476] msm_iommu_v1 fd928000.qcom,iommu: device mdp_iommu mapped at f0280000, with 3 ctx banks
  191. [ 0.426359] msm_iommu_v1 fdc84000.qcom,iommu: device venus_iommu mapped at f02a0000, with 5 ctx banks
  192. [ 0.427326] msm_iommu_v1 fdb10000.qcom,iommu: device kgsl_iommu mapped at f02c0000, with 2 ctx banks
  193. [ 0.428481] msm_iommu_v1 fda44000.qcom,iommu: device vfe_iommu mapped at f02e0000, with 3 ctx banks
  194. [ 0.429533] msm_iommu_ctx_v1 fda6c000.qcom,iommu-ctx: context jpeg_enc0 using bank 0
  195. [ 0.429719] msm_iommu_ctx_v1 fda6d000.qcom,iommu-ctx: context jpeg_enc1 using bank 1
  196. [ 0.429985] msm_iommu_ctx_v1 fda6e000.qcom,iommu-ctx: context jpeg_dec using bank 2
  197. [ 0.430240] msm_iommu_ctx_v1 fd930000.qcom,iommu-ctx: context mdp_0 using bank 0
  198. [ 0.430431] msm_iommu_ctx_v1 fd931000.qcom,iommu-ctx: context mdp_1 using bank 1
  199. [ 0.430669] msm_iommu_ctx_v1 fd932000.qcom,iommu-ctx: context mdp_2 using bank 2
  200. [ 0.430917] msm_iommu_ctx_v1 fdc8c000.qcom,iommu-ctx: context venus_ns using bank 0
  201. [ 0.431110] msm_iommu_ctx_v1 fdc8d000.qcom,iommu-ctx: context venus_sec_bitstream using bank 1
  202. [ 0.431347] msm_iommu_ctx_v1 fdc8e000.qcom,iommu-ctx: context venus_fw using bank 2
  203. [ 0.431582] msm_iommu_ctx_v1 fdc8f000.qcom,iommu-ctx: context venus_sec_pixel using bank 3
  204. [ 0.431825] msm_iommu_ctx_v1 fdc90000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4
  205. [ 0.432022] msm_iommu_ctx_v1 fdb18000.qcom,iommu-ctx: context gfx3d_user using bank 0
  206. [ 0.432259] msm_iommu_ctx_v1 fdb19000.qcom,iommu-ctx: context gfx3d_priv using bank 1
  207. [ 0.432509] msm_iommu_ctx_v1 fda4c000.qcom,iommu-ctx: context vfe0 using bank 0
  208. [ 0.432689] msm_iommu_ctx_v1 fda4d000.qcom,iommu-ctx: context vfe1 using bank 1
  209. [ 0.432925] msm_iommu_ctx_v1 fda4e000.qcom,iommu-ctx: context cpp using bank 2
  210. [ 0.434915] Advanced Linux Sound Architecture Driver Version 1.0.25.
  211. [ 0.435553] Bluetooth: Core ver 2.16
  212. [ 0.435678] NET: Registered protocol family 31
  213. [ 0.435808] Bluetooth: HCI device and connection manager initialized
  214. [ 0.435884] Bluetooth: HCI socket layer initialized
  215. [ 0.436015] Bluetooth: L2CAP socket layer initialized
  216. [ 0.436346] Bluetooth: SCO socket layer initialized
  217. [ 0.436838] cfg80211: Calling CRDA to update world regulatory domain
  218. [ 0.437915] Switching to clocksource arch_sys_counter
  219. [ 0.476982] NET: Registered protocol family 2
  220. [ 0.477276] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  221. [ 0.478001] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  222. [ 0.479655] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  223. [ 0.480476] TCP: Hash tables configured (established 131072 bind 65536)
  224. [ 0.480608] TCP: reno registered
  225. [ 0.480688] UDP hash table entries: 512 (order: 2, 16384 bytes)
  226. [ 0.480808] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  227. [ 0.481289] NET: Registered protocol family 1
  228. [ 0.481705] Trying to unpack rootfs image as initramfs...
  229. [ 0.536922] Freeing initrd memory: 960K
  230. [ 0.537039] VFP support v0.3: implementor 51 architecture 64 part 6f variant 2 rev 0
  231. [ 0.540806] Detected 9 counters on the L2CC PMU.
  232. [ 0.542883] gpiochip_add: registered GPIOs 945 to 976 on device: smp2p
  233. [ 0.543886] gpiochip_add: registered GPIOs 913 to 944 on device: smp2p
  234. [ 0.544129] gpiochip_add: registered GPIOs 881 to 912 on device: smp2p
  235. [ 0.545153] gpiochip_add: registered GPIOs 849 to 880 on device: smp2p
  236. [ 0.545470] gpiochip_add: registered GPIOs 817 to 848 on device: slave-kernel
  237. [ 0.546413] gpiochip_add: registered GPIOs 785 to 816 on device: master-kernel
  238. [ 0.546738] gpiochip_add: registered GPIOs 753 to 784 on device: smp2p
  239. [ 0.547695] gpiochip_add: registered GPIOs 721 to 752 on device: smp2p
  240. [ 0.547995] gpiochip_add: registered GPIOs 689 to 720 on device: slave-kernel
  241. [ 0.549075] gpiochip_add: registered GPIOs 657 to 688 on device: master-kernel
  242. [ 0.549329] gpiochip_add: registered GPIOs 625 to 656 on device: smp2p
  243. [ 0.550379] gpiochip_add: registered GPIOs 593 to 624 on device: smp2p
  244. [ 0.550620] gpiochip_add: registered GPIOs 561 to 592 on device: slave-kernel
  245. [ 0.551686] gpiochip_add: registered GPIOs 529 to 560 on device: master-kernel
  246. [ 0.555908] pil-q6v5-lpass fe200000.qcom,lpass: using secure boot
  247. [ 0.560578] pil_venus fdce0000.qcom,venus: using secure boot
  248. [ 0.566477] NET: Registered protocol family 27
  249. [ 0.575778] acpuclk-8974 qcom,acpuclk.30: SPEED BIN: 1
  250. [ 0.575935] acpuclk-8974 qcom,acpuclk.30: ACPU PVS: 3
  251. [ 0.579301] acpuclk-8974 qcom,acpuclk.30: CPU Frequencies Supported: 14
  252. [ 0.586268] msm_rpm_log_probe: OK
  253. [ 0.596153] ocmem: Client sensors (id: 6) not allowed to use OCMEM
  254. [ 0.596354] OCMEM notifier registration failed
  255. [ 0.596696] sns_ocmem_main: sns_ocmem_init failed -14
  256. [ 0.600026] bluetooth_rfkill_init
  257. [ 0.600979] bluetooth_rfkill_init done
  258. [ 0.601516] bluetooth_rfkill_probe
  259. [ 0.601721] bluetooth_set_power set blocked=1
  260. [ 0.602054] Bluetooth RESET LOW!!
  261. [ 0.603248] mpm_counter: [ 0.603234]:(140805)
  262. [ 0.606154] audit: initializing netlink socket (disabled)
  263. [ 0.606246] type=2000 audit(0.500:1): initialized
  264. [ 0.606781] highmem bounce pool size: 64 pages
  265. [ 0.611052] fuse init (API version 7.18)
  266. [ 0.612606] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  267. [ 0.612678] io scheduler noop registered
  268. [ 0.612717] io scheduler deadline registered
  269. [ 0.612761] io scheduler row registered
  270. [ 0.612842] io scheduler cfq registered (default)
  271. [ 0.612882] io scheduler test-iosched registered
  272. [ 0.612992] lm3630_parse_dt: max_current =0x12 min_brightness = 0x5 max_brightness = 0xFF default_brightness = 0x20
  273. [ 0.613064] lm3630_parse_dt: boost_ctrl_reg = 0x30 bank_sel = 0 linear_map = 1 pwm_enable = 0 blmap_size = 0
  274. [ 0.613271] lm3630_probe: lm3630 probed
  275. [ 0.613755] mdss_mdp_probe: MDP HW Base phy_Address=0xfd900000 virt=0xf0340000
  276. [ 0.613807] mdss_mdp_probe: MDSS VBIF HW Base phy_Address=0xfd924000 virt=0xf02d8000
  277. [ 0.615788] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
  278. [ 0.615857] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
  279. [ 0.616297] mdss_dsi_panel_probe: Panel Name = JDI 1080p command mode dsi panel
  280. [ 0.616369] mdss_panel_parse_dt: Panel ID = 5
  281. [ 0.616690] mdss_dsi_retrieve_ctrl_resources: dsi base=f0316800 size=600
  282. [ 0.616945] dsi_panel_device_register:1191 Continuous splash flag enabled.
  283. [ 0.638532] mdss_register_panel: adding framebuffer device fd922800.qcom,mdss_dsi
  284. [ 0.638735] mdss_hw_init: MDP Rev=10020000
  285. [ 0.640368] hdmi_tx_init_resource: 'core_physical': start = 0xf0318100, len=0x370
  286. [ 0.640445] hdmi_tx_init_resource: 'phy_physical': start = 0xf031a500, len=0x7c
  287. [ 0.640519] hdmi_tx_init_resource: 'qfprom_physical': start = 0xf0320000, len=0x60f0
  288. [ 0.641040] mdss_register_panel: adding framebuffer device fd922100.qcom,hdmi_tx
  289. [ 0.643153] mdss_register_panel: adding framebuffer device qcom,mdss_wb_panel.2
  290. [ 0.643765] mdss_fb_alloc_fbmem_iommu: mdss_fb_alloc_fbmem_iommu frame buffer reserve_size=0x1000000
  291. [ 0.644007] mdss_fb_alloc_fbmem_iommu: allocating 16777216 bytes at f1000000 (7ee00000 phys) for fb 0
  292. [ 0.644148] mdss_fb_register: FrameBuffer[0] 1080x1920 size=16777216 registered successfully!
  293. [ 0.644363] mdss_fb_register: FrameBuffer[1] 640x480 size=0 registered successfully!
  294. [ 0.644554] mdss_fb_register: FrameBuffer[2] 1920x1080 size=0 registered successfully!
  295. [ 0.644831] avdd-3p3: Failed to create debugfs directory
  296. [ 0.644916] anx7808 anx7808_vdd_1p0_power: vdd 1.0V is already off
  297. [ 0.645080] sps: BAM device 0xf9944000 is not registered yet.
  298. [ 0.645155] sps:BAM 0xf9944000 is registered.
  299. [ 0.645194] msm_serial_hs: BAM device registered. bam_handle=0x0
  300. [ 0.647940] f9960000.uart: ttyHS99 at MMIO 0xf9960000 (irq = 148) is a MSM HS UART
  301. [ 0.649821] msm_serial_hs module loaded
  302. [ 0.650106] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
  303. [ 0.650231] f991d000.serial: ttyHSL0 at MMIO 0xf991d000 (irq = 139) is a MSM
  304. [ 0.651920] msm_hsl_console_setup: console setup on port #0
  305. [ 0.652049] console [ttyHSL0] enabled
  306. [ 0.652301] msm_serial_hsl_init: driver initialized
  307. [ 0.654752] diagchar initialized now
  308. [ 0.656641] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
  309. [ 0.662992] brd: module loaded
  310. [ 0.664543] loop: module loaded
  311. [ 0.664658] i2c-core: driver [isa1200] using legacy suspend method
  312. [ 0.664698] i2c-core: driver [isa1200] using legacy resume method
  313. [ 0.665638] QSEECOM: qseecom_probe: bam_pipe_pair=0x2
  314. [ 0.665689] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
  315. [ 0.665793] QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x1
  316. [ 0.665896] QSEECOM: qseecom_probe: secure app region addr=0x7b00000 size=0x500000
  317. [ 0.666633] i2c-core: driver [tabla-i2c-core] using legacy suspend method
  318. [ 0.666711] i2c-core: driver [tabla-i2c-core] using legacy resume method
  319. [ 0.666841] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
  320. [ 0.666910] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
  321. [ 0.667352] SCSI Media Changer driver v0.25
  322. [ 0.667968] spi_qsd f9966000.spi: master is unqueued, this is deprecated
  323. [ 0.668689] tun: Universal TUN/TAP device driver, 1.6
  324. [ 0.668758] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  325. [ 0.668838] rmnet_init: BAM devices[8]
  326. [ 0.674294] PPP generic driver version 2.4.2
  327. [ 0.674394] PPP BSD Compression module registered
  328. [ 0.674433] PPP Deflate Compression module registered
  329. [ 0.674656] PPP MPPE Compression module registered
  330. [ 0.674696] NET: Registered protocol family 24
  331. [ 0.674779] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  332. [ 0.674819] CSLIP: code copyright 1989 Regents of the University of California.
  333. [ 0.674911] usbcore: registered new interface driver catc
  334. [ 0.674998] usbcore: registered new interface driver kaweth
  335. [ 0.675037] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
  336. [ 0.675125] usbcore: registered new interface driver pegasus
  337. [ 0.675180] usbcore: registered new interface driver rtl8150
  338. [ 0.675250] hso: /usr/local/google/buildbot/src/partner-android/m-dev-msm-hammerhead-3.4-mnc-mr1/private/msm-lge/drivers/net/usb/hso.c: Option Wireless
  339. [ 0.675341] usbcore: registered new interface driver hso
  340. [ 0.675396] usbcore: registered new interface driver asix
  341. [ 0.675484] usbcore: registered new interface driver cdc_ether
  342. [ 0.675540] usbcore: registered new interface driver cdc_eem
  343. [ 0.675625] usbcore: registered new interface driver dm9601
  344. [ 0.675681] usbcore: registered new interface driver smsc75xx
  345. [ 0.675768] usbcore: registered new interface driver smsc95xx
  346. [ 0.675824] usbcore: registered new interface driver gl620a
  347. [ 0.675910] usbcore: registered new interface driver net1080
  348. [ 0.675971] usbcore: registered new interface driver plusb
  349. [ 0.676061] usbcore: registered new interface driver rndis_host
  350. [ 0.676115] usbcore: registered new interface driver cdc_subset
  351. [ 0.676199] usbcore: registered new interface driver zaurus
  352. [ 0.676254] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  353. [ 0.676402] usbcore: registered new interface driver int51x1
  354. [ 0.676488] usbcore: registered new interface driver kalmia
  355. [ 0.676543] usbcore: registered new interface driver ipheth
  356. [ 0.676625] usbcore: registered new interface driver sierra_net
  357. [ 0.676682] usbcore: registered new interface driver cx82310_eth
  358. [ 0.676766] usbcore: registered new interface driver cdc_ncm
  359. [ 0.676821] usbcore: registered new interface driver qmi_wwan
  360. [ 0.678172] vdd-1p0: Failed to create debugfs directory
  361. [ 0.698100] anx7808 sp_tx_hardware_poweron: anx7808 power on
  362. [ 0.699118] anx7808 sp_tx_chip_located: ANX7808 BA is found.
  363. [ 0.700638] anx7808 sp_tx_vbus_powerdown: 3.3V output disabled
  364. [ 0.726991] msm-dwc3 msm_dwc3: Read platform data for adc low threshold
  365. [ 0.727032] msm-dwc3 msm_dwc3: Read platform data for adc high threshold
  366. [ 0.727421] dwc3 f9200000.dwc3: maximum speed: high
  367. [ 0.758164] anx7808 sp_tx_hardware_powerdown: anx7808 power down
  368. [ 0.758312] anx7808 sp_tx_set_sys_state: SP_TX To System State:
  369. [ 0.758353] anx7808 sp_tx_set_sys_state: STATE_CABLE_PLUG
  370. [ 0.758771] anx7808 anx7808_get_usb_clk: clk: 1000
  371. [ 0.818134] bcm2079x 0-0077: requesting IRQ 360
  372. [ 0.818243] bcm2079x 0-0077: bcm2079x_probe, probing bcm2079x driver exited successfully
  373. [ 0.932492] usbcore: registered new interface driver cdc_acm
  374. [ 0.932564] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  375. [ 0.932624] usbcore: registered new interface driver usblp
  376. [ 0.932711] usbcore: registered new interface driver cdc_wdm
  377. [ 0.932750] Initializing USB Mass Storage driver...
  378. [ 0.932836] usbcore: registered new interface driver usb-storage
  379. [ 0.932875] USB Mass Storage support registered.
  380. [ 0.932956] usbcore: registered new interface driver ums-alauda
  381. [ 0.933009] usbcore: registered new interface driver ums-cypress
  382. [ 0.933092] usbcore: registered new interface driver ums-datafab
  383. [ 0.933145] usbcore: registered new interface driver ums_eneub6250
  384. [ 0.933228] usbcore: registered new interface driver ums-freecom
  385. [ 0.933280] usbcore: registered new interface driver ums-isd200
  386. [ 0.933366] usbcore: registered new interface driver ums-jumpshot
  387. [ 0.933449] usbcore: registered new interface driver ums-karma
  388. [ 0.933502] usbcore: registered new interface driver ums-onetouch
  389. [ 0.933584] usbcore: registered new interface driver ums-sddr09
  390. [ 0.933637] usbcore: registered new interface driver ums-sddr55
  391. [ 0.933721] usbcore: registered new interface driver ums-usbat
  392. [ 0.933777] usbcore: registered new interface driver trancevibrator
  393. [ 0.934137] mbim_init: initialize 1 instances
  394. [ 0.934216] mbim_init: Initialized 1 ports
  395. [ 0.935202] rndis_qc_init: initialize rndis QC instance
  396. [ 0.935486] gadget: Mass Storage Function, version: 2009/09/11
  397. [ 0.935526] gadget: Number of LUNs=1
  398. [ 0.935596] lun0: LUN: removable file: (no medium)
  399. [ 0.935820] gadget: android_usb ready
  400. [ 0.936272] usbcore: registered new interface driver xpad
  401. [ 0.936330] usbcore: registered new interface driver usb_acecad
  402. [ 0.936420] usbcore: registered new interface driver aiptek
  403. [ 0.936476] usbcore: registered new interface driver gtco
  404. [ 0.936533] usbcore: registered new interface driver hanwang
  405. [ 0.936590] usbcore: registered new interface driver kbtab
  406. [ 0.936648] usbcore: registered new interface driver wacom
  407. [ 0.936956] [Touch] touch on
  408. [ 0.937643] input: touch_dev as /devices/virtual/input/input1
  409. [ 0.942243] [Touch] TYPE = 1 product id[PLG218] : syna product id[]
  410. [ 0.942283] [Touch] IC identifier[PLG218 - 1] fw_version[E079]
  411. [ 0.942354] [Touch] image_version[E079] : force[0]
  412. [ 0.943223] [Touch] FW-upgrade is not executed
  413. [ 0.943885] using rtc device, qpnp_rtc, for alarms
  414. [ 0.943938] qcom,qpnp-rtc qpnp-rtc-15: rtc core: registered qpnp_rtc as rtc0
  415. [ 0.944144] i2c /dev entries driver
  416. [ 0.945168] ocmem: Notifier registered for 1
  417. [ 0.946655] msm_cci_probe: pdev ee13bc00 device id = -1
  418. [ 0.950188] imx179_init_module:158
  419. [ 1.243758] __msm_jpeg_init:933] Jpeg Device id 0
  420. [ 1.243962] __msm_jpeg_init:933] Jpeg Device id 1
  421. [ 1.244178] __msm_jpeg_init:933] Jpeg Device id 2
  422. [ 1.249081] lirc_dev: IR Remote Control driver registered, major 237
  423. [ 1.249187] IR NEC protocol handler initialized
  424. [ 1.249226] IR RC5(x) protocol handler initialized
  425. [ 1.249296] IR RC6 protocol handler initialized
  426. [ 1.249334] IR JVC protocol handler initialized
  427. [ 1.249404] IR Sony protocol handler initialized
  428. [ 1.249443] IR RC5 (streamzap) protocol handler initialized
  429. [ 1.249482] IR SANYO protocol handler initialized
  430. [ 1.249552] IR MCE Keyboard/mouse protocol handler initialized
  431. [ 1.249591] IR LIRC bridge handler initialized
  432. [ 1.249706] usbcore: registered new interface driver uvcvideo
  433. [ 1.249745] USB Video Class driver (1.1.1)
  434. [ 1.249909] qpnp_charger_read_dt_props: tm not ready -517
  435. [ 1.249955] spmi qpnp-charger-12: Driver qcom,qpnp-charger requests probe deferral
  436. [ 1.250084] max17048_probe: start
  437. [ 1.250125] ac supply not found deferring probe
  438. [ 1.250169] i2c 84-0036: Driver max17048 requests probe deferral
  439. [ 1.250427] bq51013b_probe: start
  440. [ 1.250552] bq51013b_parse_dt: current_ma = 704
  441. [ 1.257906] bq24192_get_soc_from_batt_psy: battery power supply is not registered yet
  442. [ 1.259220] bq24192_get_prop_input_voltage: Unable to read vbus rc=-517
  443. [ 1.259742] bq24192_get_soc_from_batt_psy: battery power supply is not registered yet
  444. [ 1.261502] bq24192_probe: probe success
  445. [ 1.261841] bq24192_get_prop_input_voltage: Unable to read vbus rc=-517
  446. [ 1.312965] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  447. [ 1.313129] Bluetooth: BlueSleep Mode Driver Ver 1.1
  448. [ 1.313436] Bluetooth: bt_host_wake 42, bt_ext_wake 62
  449. [ 1.313483] Bluetooth: host_wake_irq 312, polarity 0
  450. [ 1.314240] cpuidle: using governor ladder
  451. [ 1.314563] cpuidle: using governor menu
  452. [ 1.314620] sdhci: Secure Digital Host Controller Interface driver
  453. [ 1.314688] sdhci: Copyright(c) Pierre Ossman
  454. [ 1.315012] mmc0: SDCC Version: 0x00000038
  455. [ 1.317309] mmc0: bam physical base=0xf9884000
  456. [ 1.317349] mmc0: bam virtual base=0xf0378000
  457. [ 1.317391] sps:BAM 0xf9884000 is registered.
  458. [ 1.317461] mmc0: BAM device registered. bam_handle=0xed663c00
  459. [ 1.318126] sps:BAM 0xf9884000 (va:0xf0378000) enabled: ver:0x6, number of pipes:6
  460. [ 1.318898] mmc0: Qualcomm MSM SDCC-BAM at [mem 0xf9884000-0xf988afff flags 0x200] [irq 252 flags 0x400]
  461. [ 1.318983] mmc0: Qualcomm MSM SDCC-DML [mem 0xf98a4800-0xf98a48ff flags 0x200]
  462. [ 1.319047] mmc0: id 2, nonremovable 0
  463. [ 1.319117] wcf_status: wifi_detect = 0
  464. [ 1.319155] wcf_status_register
  465. [ 1.321902] mmc0: Qualcomm MSM SDCC-core [mem 0xf98a4000-0xf98a47ff flags 0x200] [irq 157 flags 0x400],0 dma -1 dmacrcri -1
  466. [ 1.321981] mmc0: Controller capabilities: 0x00003ffe
  467. [ 1.322053] mmc0: 8 bit data mode disabled
  468. [ 1.322091] mmc0: 4 bit data mode enabled
  469. [ 1.322198] mmc0: polling status mode disabled
  470. [ 1.322239] mmc0: MMC clock 400000 -> 200000000 Hz, PCLK 0 Hz
  471. [ 1.322277] mmc0: Slot eject status = 1
  472. [ 1.322345] mmc0: Power save feature enable = 1
  473. [ 1.322384] mmc0: SPS-BAM data transfer mode available
  474. [ 1.322740] sdhci-pltfm: SDHCI platform and OF driver helper
  475. [ 1.326851] mmc1: no vmmc regulator found
  476. [ 1.329055] mmc1: SDHCI controller on msm_sdcc.1 [msm_sdcc.1] using ADMA
  477. [ 1.330638] qcom,leds-qpnp leds-qpnp-24: Regulator get failed(-517)
  478. [ 1.330709] qcom,leds-qpnp leds-qpnp-24: Unable to read flash config data
  479. [ 1.330755] spmi leds-qpnp-24: Driver qcom,leds-qpnp requests probe deferral
  480. [ 1.332113] usbcore: registered new interface driver usbhid
  481. [ 1.332152] usbhid: USB HID core driver
  482. [ 1.332462] ashmem: initialized
  483. [ 1.332897] sps:BAM 0xf9304000 is registered.
  484. [ 1.332947] sps:BAM 0xf9a44000 is registered.
  485. [ 1.333052] usb_bam_ipa_create_resources: Failed to create USB_PROD resource
  486. [ 1.333441] qpnp_coincell_charger_show_state: enabled=Y, voltage=3000 mV, resistance=2100 ohm
  487. [ 1.333625] PMIC@SID4: PM8841 v2.1 options: 0, 0, 2, 2
  488. [ 1.333808] PMIC@SID0: PM8941 v3.1 options: 0, 0, 0, 0
  489. [ 1.334041] usbcore: registered new interface driver snd-usb-audio
  490. [ 1.341630] msm-compr-dsp msm-compr-dsp: msm_compr_probe: dev name msm-compr-dsp
  491. [ 1.342101] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
  492. [ 1.342752] platform qcom,msm-voip-dsp.39: Driver msm-voip-dsp requests probe deferral
  493. [ 1.343112] platform qcom,msm-pcm-voice.40: Driver msm-pcm-voice requests probe deferral
  494. [ 1.344791] ocmem: Notifier registered for 5
  495. [ 1.345303] msm8974-asoc-taiko sound.29: msm8974_asoc_machine_probe(): hdmi audio support present
  496. [ 1.345347] msm8974-asoc-taiko sound.29: property qcom,us-euro-gpios not detected in node /soc/sound
  497. [ 1.345572] msm8974-asoc-taiko sound.29: msm8974_asoc_machine_probe() MBHC disabled = 1
  498. [ 1.346365] u32 classifier
  499. [ 1.346405] Actions configured
  500. [ 1.346448] Netfilter messages via NETLINK v0.30.
  501. [ 1.346608] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  502. [ 1.346983] ctnetlink v0.93: registering with nfnetlink.
  503. [ 1.347083] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  504. [ 1.347154] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  505. [ 1.347369] xt_time: kernel timezone is -0000
  506. [ 1.347616] ip_tables: (C) 2000-2006 Netfilter Core Team
  507. [ 1.347812] arp_tables: (C) 2002 David S. Miller
  508. [ 1.347882] TCP: cubic registered
  509. [ 1.347954] Initializing XFRM netlink socket
  510. [ 1.348343] NET: Registered protocol family 10
  511. [ 1.349728] Mobile IPv6
  512. [ 1.349814] ip6_tables: (C) 2000-2006 Netfilter Core Team
  513. [ 1.349977] IPv6 over IPv4 tunneling driver
  514. [ 1.350348] NET: Registered protocol family 17
  515. [ 1.350432] NET: Registered protocol family 15
  516. [ 1.350549] Bridge firewalling registered
  517. [ 1.350626] Ebtables v2.0 registered
  518. [ 1.350833] Bluetooth: RFCOMM TTY layer initialized
  519. [ 1.350889] Bluetooth: RFCOMM socket layer initialized
  520. [ 1.350958] Bluetooth: RFCOMM ver 1.11
  521. [ 1.350995] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  522. [ 1.351100] Bluetooth: BNEP filters: protocol multicast
  523. [ 1.351150] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  524. [ 1.351244] L2TP core driver, V2.0
  525. [ 1.351300] PPPoL2TP kernel driver, V2.0
  526. [ 1.351732] Registering SWP/SWPB emulation handler
  527. [ 1.351822] clock_late_init: Removing enables held for handed-off clocks
  528. [ 1.359346] gdsc_oxili_gx: disabling
  529. [ 1.359397] gdsc_venus: disabling
  530. [ 1.359848] boost_gpio_probe
  531. [ 1.360238] qcom,leds-qpnp leds-qpnp-24: Regulator get failed(-517)
  532. [ 1.360311] qcom,leds-qpnp leds-qpnp-24: Unable to read flash config data
  533. [ 1.360321] platform fe12f000.slim: Driver ngd_msm_ctrl requests probe deferral
  534. [ 1.360424] spmi leds-qpnp-24: Driver qcom,leds-qpnp requests probe deferral
  535. [ 1.360502] max17048_probe: start
  536. [ 1.360595] max17048_parse_dt: rcomp = 77 rcomp_co_hot = 700 rcomp_co_cold = 5225
  537. [ 1.360636] max17048_parse_dt: alert_thres = 2 full_soc = 970 empty_soc = 10 uvlo=3050
  538. [ 1.360763] wifi_set_power = 1
  539. [ 1.361274] max17048 84-0036: MAX17048 Fuel-Gauge Ver 0x12
  540. [ 1.361417] bq24192_get_soc_from_batt_psy: battery power supply is not registered yet
  541. [ 1.390877] max17048_probe: done
  542. [ 1.391079] 8941_smbb_boost: 5000 mV
  543. [ 1.391297] qpnp_charger_probe: success chg_dis = 0, bpd = 1, usb = 0, dc = 0 b_health = 0 batt_present = 0
  544. [ 1.394812] platform fe12f000.slim: Driver ngd_msm_ctrl requests probe deferral
  545. [ 1.419930] max17048_work: rsoc=0x28E7 rvcell=0x0B78 soc=20 v_mv=3670 i_ua=684159 t=454
  546. [ 1.453257] mmc1: BKOPS_EN bit = 0
  547. [ 1.465228] mmc1: new HS200 MMC card at address 0001
  548. [ 1.465678] mmcblk0: mmc1:0001 SEM32G 29.1 GiB
  549. [ 1.465977] mmcblk0rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB
  550. [ 1.468232] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29
  551. [ 1.470365] platform fe12f000.slim: Driver ngd_msm_ctrl requests probe deferral
  552. [ 1.513706] bcm_wifi_set_power: wifi power successed to pull up
  553. [ 1.718104] wifi_set_carddetect = 1
  554. [ 1.718174] wcf_status: wifi_detect = 1
  555. [ 1.718213] mmc0: Slot status change detected (0 -> 1)
  556. [ 1.718827] platform fe12f000.slim: Driver ngd_msm_ctrl requests probe deferral
  557. [ 1.770580] mmc0: queuing unknown CIS tuple 0x91 (3 bytes)
  558. [ 1.770645] mmc0: new ultra high speed SDR104 SDIO card at address 0001
  559. [ 1.771028] platform fe12f000.slim: Driver ngd_msm_ctrl requests probe deferral
  560. [ 1.771364] platform fe12f000.slim: Driver ngd_msm_ctrl requests probe deferral
  561. [ 1.776068] F1 signature OK, socitype:0x1 chip:0x4339 rev:0x1 pkg:0x2
  562. [ 1.776825] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
  563. [ 1.777082] CFG80211-ERROR) wl_setup_wiphy : Registering Vendor80211)
  564. [ 1.777161] CFG80211-ERROR) wl_cfgvendor_attach : Vendor: Register BRCM cfg80211 vendor cmd(0x67) interface
  565. [ 1.777533] CFG80211-ERROR) wl_event_handler : tsk Enter, tsk = 0xed0c1474
  566. [ 1.777647] wl_create_event_handler(): thread:wl_event_handler:7a started
  567. [ 1.778212] p2p0: P2P Interface Registered
  568. [ 1.778342] dhd_attach(): thread:dhd_watchdog_thread:7b started
  569. [ 1.778432] dhd_attach(): thread:dhd_dpc:7c started
  570. [ 1.778531] dhd_attach(): thread:dhd_rxf:7d started
  571. [ 1.778653] dhd_attach(): thread:dhd_sysioc:7e started
  572. [ 1.778932] wifi_get_mac_addr
  573. [ 1.779032] bcm_wifi_get_mac_addr: Failed to get information from file /persist/wifi/.macaddr (-2)
  574. [ 1.779073] [bcm_wifi_get_mac_addr] Exiting. MAC 00:90:4C:7E:37:FE
  575. [ 1.779418] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:7e:37:fe
  576. [ 1.779510]
  577. [ 1.779511] Dongle Host Driver, version 1.88.45 (r)
  578. [ 1.779513] Compiled in drivers/net/wireless/bcmdhd on Aug 24 2016 at 20:12:19
  579. [ 1.779653] wifi_set_power = 0
  580. [ 1.779661] platform fe12f000.slim: Driver ngd_msm_ctrl requests probe deferral
  581. [ 1.879793] bcm_wifi_set_power: wifi power successed to pull down
  582. [ 1.879833] =========== WLAN placed in RESET ========
  583. [ 1.880921] input: gpio-keys as /devices/gpio_keys.70/input/input2
  584. [ 1.881336] platform fe12f000.slim: Driver ngd_msm_ctrl requests probe deferral
  585. [ 1.881433] qcom,qpnp-rtc qpnp-rtc-15: setting system clock to 1970-01-18 16:52:11 UTC (1529531)
  586. [ 1.888512] batt_tm_ctrl_probe: probe success
  587. [ 1.888727] platform fe12f000.slim: Driver ngd_msm_ctrl requests probe deferral
  588. [ 1.889376] msm8974_pwm_vibrator_probe: probed
  589. [ 1.889582] platform fe12f000.slim: Driver ngd_msm_ctrl requests probe deferral
  590. [ 1.894464] max1462x_hsd_probe: acc_read_value - 14000
  591. [ 1.894587] input: hs_detect as /devices/virtual/input/input3
  592. [ 1.894831] ALSA device list:
  593. [ 1.894857] platform fe12f000.slim: Driver ngd_msm_ctrl requests probe deferral
  594. [ 1.894937] No soundcards found.
  595. [ 1.895331] Freeing init memory: 192K
  596. [ 1.896681] init: init started!
  597. [ 1.923357] type=1403 audit(1529531.530:2): policy loaded auid=4294967295 ses=4294967295
  598. [ 1.923795] type=1404 audit(1529531.530:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
  599. [ 1.928290] init: (Initializing SELinux enforcing took 0.03s.)
  600. [ 1.933977] init: init second stage started!
  601. [ 1.980354] mmc0: SDIO interrupt recieved without function driver claiming an irq
  602. [ 1.992665] init: waitpid failed: No child processes
  603. [ 1.992990] init: (Loading properties from /default.prop took 0.00s.)
  604. [ 1.994292] init: (Parsing /init.environ.rc took 0.00s.)
  605. [ 1.994525] init: (Parsing /init.usb.rc took 0.00s.)
  606. [ 1.995223] init: (Parsing init.hammerhead.usb.rc took 0.00s.)
  607. [ 1.995288] init: could not import file 'init.hammerhead_svelte.rc' from '/init.hammerhead.rc'
  608. [ 1.995406] init: (Parsing init.hammerhead.diag.rc took 0.00s.)
  609. [ 1.995466] init: could not import file 'init.hammerhead_fp.rc' from '/init.hammerhead.rc'
  610. [ 1.995546] init: (Parsing /init.hammerhead.rc took 0.00s.)
  611. [ 1.995859] init: (Parsing /init.usb.configfs.rc took 0.00s.)
  612. [ 1.995959] init: (Parsing /init.zygote32.rc took 0.00s.)
  613. [ 1.996101] init: (Parsing /init.trace.rc took 0.00s.)
  614. [ 1.996199] init: (Parsing init.supersu.rc took 0.00s.)
  615. [ 1.996279] init: (Parsing /init.rc took 0.00s.)
  616. [ 1.996423] init: SELinux: Could not get canonical path /adb_keys restorecon: No such file or directory.
  617. [ 1.996543] init: Starting service 'ueventd'...
  618. [ 1.997211] init: Waiting for /dev/.coldboot_done...
  619. [ 1.998648] ueventd: ueventd started!
  620. [ 2.325368] ueventd: Coldboot took 0.32s.
  621. [ 2.330064] init: Waiting for /dev/.coldboot_done took 0.33s.
  622. [ 2.335366] keychord: using input dev qpnp_pon for fevent
  623. [ 2.335410] keychord: using input dev gpio-keys for fevent
  624. [ 2.335483] keychord: using input dev hs_detect for fevent
  625. [ 2.340018] init: write_file: Unable to open '/proc/sys/kernel/hung_task_timeout_secs': No such file or directory
  626. [ 2.340172] init: write_file: Unable to open '/proc/sys/kernel/sched_tunable_scaling': No such file or directory
  627. [ 2.340267] init: write_file: Unable to open '/proc/sys/kernel/sched_latency_ns': No such file or directory
  628. [ 2.340364] init: write_file: Unable to open '/proc/sys/kernel/sched_wakeup_granularity_ns': No such file or directory
  629. [ 2.340459] init: write_file: Unable to open '/proc/sys/kernel/sched_compat_yield': No such file or directory
  630. [ 2.341615] init: write_file: Unable to write to '/dev/cpuctl/cpu.shares': Invalid argument
  631. [ 2.343471] init: write_file: Unable to open '/proc/sys/abi/swp': No such file or directory
  632. [ 2.421132] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: barrier=1
  633. [ 2.421385] fs_mgr: __mount(source=/dev/block/platform/msm_sdcc.1/by-name/system,target=/system,type=ext4)=0
  634. [ 2.426529] EXT4-fs (mmcblk0p28): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
  635. [ 2.426653] fs_mgr: check_fs(): mount(/dev/block/platform/msm_sdcc.1/by-name/userdata,/data,ext4)=0: Success
  636. [ 2.428688] fs_mgr: check_fs(): unmount(/data) succeeded
  637. [ 2.429358] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/userdata
  638. [ 2.500599] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
  639. [ 2.500601]
  640. [ 2.500703] e2fsck: /dev/block/platform/msm_sdcc.1/by-name/userdata: clean, 88264/1785856 files, 5486695/7137786 blocks
  641. [ 2.500706]
  642. [ 2.505759] EXT4-fs (mmcblk0p28): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,nomblk_io_submit,noauto_da_alloc,errors=panic
  643. [ 2.505901] fs_mgr: __mount(source=/dev/block/platform/msm_sdcc.1/by-name/userdata,target=/data,type=ext4)=0
  644. [ 2.510015] EXT4-fs (mmcblk0p27): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
  645. [ 2.510130] fs_mgr: check_fs(): mount(/dev/block/platform/msm_sdcc.1/by-name/cache,/cache,ext4)=0: Success
  646. [ 2.518167] fs_mgr: check_fs(): unmount(/cache) succeeded
  647. [ 2.518253] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/cache
  648. [ 2.533770] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
  649. [ 2.533772]
  650. [ 2.533864] e2fsck: /dev/block/platform/msm_sdcc.1/by-name/cache: clean, 23/44832 files, 7037/179200 blocks
  651. [ 2.533867]
  652. [ 2.538233] EXT4-fs (mmcblk0p27): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,nomblk_io_submit,noauto_da_alloc,errors=panic
  653. [ 2.538357] fs_mgr: __mount(source=/dev/block/platform/msm_sdcc.1/by-name/cache,target=/cache,type=ext4)=0
  654. [ 2.542797] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,nodelalloc,nomblk_io_submit,errors=panic
  655. [ 2.542922] fs_mgr: __mount(source=/dev/block/platform/msm_sdcc.1/by-name/persist,target=/persist,type=ext4)=0
  656. [ 2.553336] fs_mgr: __mount(source=/dev/block/platform/msm_sdcc.1/by-name/modem,target=/firmware,type=vfat)=0
  657. [ 2.555356] init: Starting service 'logd'...
  658. [ 2.564370] init: (Loading properties from /system/build.prop took 0.01s.)
  659. [ 2.564454] init: (Loading properties from /vendor/build.prop took 0.00s.)
  660. [ 2.564549] init: (Loading properties from /factory/factory.prop took 0.00s.)
  661. [ 2.567714] init: Starting service 'vold'...
  662. [ 2.574519] init: Not bootcharting.
  663. [ 2.593119] logd.auditd: start
  664. [ 2.639305] init: Starting service 'exec 0 (/system/bin/tzdatacheck)'...
  665. [ 2.649512] init: Service 'exec 0 (/system/bin/tzdatacheck)' (pid 156) exited with status 0
  666. [ 2.650034] adsp_boot_store:going to call adsp_loader_do
  667. [ 2.948545] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Brought out of reset
  668. [ 2.948701] adsp_loader_do: Q6/ADSP image is loaded
  669. [ 2.955583] msm_thermal: Core control disabled
  670. [ 2.955718] init: write_file: Unable to write to '/sys/devices/system/cpu/cpu1/online': Invalid argument
  671. [ 2.958432] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  672. [ 2.963678] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  673. [ 2.966145] init: write_file: Unable to open '/sys/devices/system/cpu/cpufreq/ondemand/down_differential_multi_core': No such file or directory
  674. [ 2.970623] msm_thermal: Core control enabled
  675. [ 2.970668] msm_thermal: Hotplug task is not initialized
  676. [ 2.971541] init: write_file: Unable to open '/dev/cpuctl/apps/cpu.notify_on_migrate': No such file or directory
  677. [ 2.971787] init: Warning! Service exec 1 (/sbin/launch_daemonsu.sh) needs a SELinux domain defined; please fix!
  678. [ 2.971870] init: Starting service 'exec 1 (/sbin/launch_daemonsu.sh)'...
  679. [ 2.997227] diag: In diag_send_msg_mask_update, invalid status 0
  680. [ 2.999014] taiko-slim taiko-slim-pgd: Platform data from device tree
  681. [ 2.999399] taiko-slim taiko-slim-pgd: cdc-vdd-buck: vol=[2150000 2150000]uV, curr=[650000]uA, ond 0
  682. [ 2.999503] taiko-slim taiko-slim-pgd: cdc-vdd-tx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
  683. [ 2.999611] taiko-slim taiko-slim-pgd: cdc-vdd-rx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
  684. [ 2.999674] taiko-slim taiko-slim-pgd: cdc-vddpx-1: vol=[1800000 1800000]uV, curr=[10000]uA, ond 0
  685. [ 2.999835] taiko-slim taiko-slim-pgd: cdc-vdd-a-1p2v: vol=[1225000 1225000]uV, curr=[10000]uA, ond 0
  686. [ 2.999941] taiko-slim taiko-slim-pgd: cdc-vddcx-1: vol=[1225000 1225000]uV, curr=[10000]uA, ond 0
  687. [ 3.000090] taiko-slim taiko-slim-pgd: cdc-vddcx-2: vol=[1225000 1225000]uV, curr=[10000]uA, ond 0
  688. [ 3.011157] Slimbus QMI NGD CB received event:2
  689. [ 3.019729] SLIM SAT: Received master capability
  690. [ 3.019893] sps:BAM 0xfe104000 (va:0xf2f40000) enabled: ver:0x13, number of pipes:31
  691. [ 3.020028] sps:BAM 0xfe104000 is registered.
  692. [ 3.023992] apr_tal:Q6 Is Up
  693. [ 3.048709] slimbus:1 laddr:0xcb, EAPC:0x1:0xa0
  694. [ 3.059052] slimbus:1 laddr:0xca, EAPC:0x0:0xa0
  695. [ 3.061917] msm-dwc3 msm_dwc3: DWC3 in low power mode
  696. [ 3.065009] taiko-slim taiko-slim-pgd: wcd9xxx_check_codec_type: detected taiko_codec, major 0x102, minor 0x1, ver 0x2
  697. [ 3.068919] taiko_codec taiko_codec: taiko_codec_probe()
  698. [ 3.118755] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
  699. [ 3.119338] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
  700. [ 3.119859] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
  701. [ 3.120498] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
  702. [ 3.121084] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
  703. [ 3.121632] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok
  704. [ 3.122161] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
  705. [ 3.122670] asoc: msm-stub-rx <-> msm-dai-q6-dev.241 mapping ok
  706. [ 3.123160] asoc: msm-stub-tx <-> msm-dai-q6-dev.240 mapping ok
  707. [ 3.123711] compress asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
  708. [ 3.124246] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
  709. [ 3.124738] asoc: snd-soc-dummy-dai <-> SLIMBUS1_HOSTLESS mapping ok
  710. [ 3.125254] asoc: snd-soc-dummy-dai <-> SLIMBUS3_HOSTLESS mapping ok
  711. [ 3.125771] asoc: snd-soc-dummy-dai <-> SLIMBUS4_HOSTLESS mapping ok
  712. [ 3.126282] asoc: snd-soc-dummy-dai <-> VoLTE mapping ok
  713. [ 3.126827] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
  714. [ 3.127355] asoc: snd-soc-dummy-dai <-> LSM mapping ok
  715. [ 3.127929] asoc: snd-soc-dummy-dai <-> MultiMedia6 mapping ok
  716. [ 3.128629] asoc: snd-soc-dummy-dai <-> MultiMedia7 mapping ok
  717. [ 3.129192] asoc: snd-soc-dummy-dai <-> MultiMedia8 mapping ok
  718. [ 3.129732] asoc: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok
  719. [ 3.130263] asoc: taiko_vifeedback <-> msm-dai-q6-dev.16393 mapping ok
  720. [ 3.130780] asoc: taiko_rx2 <-> msm-dai-q6-dev.16388 mapping ok
  721. [ 3.131294] asoc: taiko_tx2 <-> msm-dai-q6-dev.16389 mapping ok
  722. [ 3.131718] asoc: msm-stub-rx <-> msm-dai-q6-dev.12288 mapping ok
  723. [ 3.132175] asoc: msm-stub-tx <-> msm-dai-q6-dev.12289 mapping ok
  724. [ 3.132591] asoc: msm-stub-rx <-> msm-dai-q6-dev.12292 mapping ok
  725. [ 3.133031] asoc: msm-stub-tx <-> msm-dai-q6-dev.12293 mapping ok
  726. [ 3.133445] asoc: msm-stub-rx <-> msm-dai-q6-dev.224 mapping ok
  727. [ 3.133886] asoc: msm-stub-tx <-> msm-dai-q6-dev.225 mapping ok
  728. [ 3.134292] asoc: msm-stub-rx <-> msm-dai-q6-auxpcm.1 mapping ok
  729. [ 3.134752] asoc: msm-stub-tx <-> msm-dai-q6-auxpcm.1 mapping ok
  730. [ 3.135157] asoc: msm-stub-rx <-> msm-dai-q6-auxpcm.2 mapping ok
  731. [ 3.135592] asoc: msm-stub-tx <-> msm-dai-q6-auxpcm.2 mapping ok
  732. [ 3.135970] msm_audrx_init(), dev_namemsm-dai-q6-dev.16384
  733. [ 3.342562] asoc: taiko_rx1 <-> msm-dai-q6-dev.16384 mapping ok
  734. [ 3.344073] asoc: taiko_tx1 <-> msm-dai-q6-dev.16385 mapping ok
  735. [ 3.344342] asoc: taiko_rx1 <-> msm-dai-q6-dev.16386 mapping ok
  736. [ 3.344584] asoc: taiko_tx1 <-> msm-dai-q6-dev.16387 mapping ok
  737. [ 3.344830] asoc: taiko_rx1 <-> msm-dai-q6-dev.16390 mapping ok
  738. [ 3.345074] asoc: taiko_tx1 <-> msm-dai-q6-dev.16391 mapping ok
  739. [ 3.345350] asoc: taiko_rx1 <-> msm-dai-q6-dev.16392 mapping ok
  740. [ 3.345676] asoc: msm-stub-tx <-> msm-dai-q6-dev.32772 mapping ok
  741. [ 3.345934] asoc: msm-stub-tx <-> msm-dai-q6-dev.32771 mapping ok
  742. [ 3.346235] asoc: taiko_mad1 <-> msm-dai-q6-dev.16395 mapping ok
  743. [ 3.346502] asoc: msm-stub-rx <-> msm-dai-q6-dev.32773 mapping ok
  744. [ 3.346816] asoc: msm_hdmi_audio_codec_rx_dai <-> msm-dai-q6-hdmi.8 mapping ok
  745. [ 3.363519] input: msm8974-taiko-mtp-snd-card Button Jack as /devices/sound.29/sound/card0/input4
  746. [ 3.363841] input: msm8974-taiko-mtp-snd-card Headset Jack as /devices/sound.29/sound/card0/input5
  747. [ 3.855502] init: Service 'exec 1 (/sbin/launch_daemonsu.sh)' (pid 179) exited with status 0
  748. [ 3.855672] init: Starting service 'exec 2 (/sbin/launch_daemonsu.sh)'...
  749. [ 4.086841] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
  750. [ 4.169221] warning: `daemonsu' uses 32-bit capabilities (legacy support in use)
  751. [ 4.880693] type=1403 audit(1529534.480:4): policy loaded auid=4294967295 ses=4294967295
  752. [ 5.080028] init: Untracked pid 322 exited with status 0
  753. [ 5.110117] init: Service 'exec 2 (/sbin/launch_daemonsu.sh)' (pid 238) exited with status 0
  754. [ 5.240730] init: Starting service 'logd-reinit'...
  755. [ 5.246882] init: Starting service 'healthd'...
  756. [ 5.247905] init: Starting service 'lmkd'...
  757. [ 5.249243] init: Starting service 'servicemanager'...
  758. [ 5.250887] init: Starting service 'surfaceflinger'...
  759. [ 5.251887] init: Starting service 'rmt_storage'...
  760. [ 5.252941] init: Starting service 'qseecomd'...
  761. [ 5.253848] init: write_file: Unable to open '/sys/module/wakelock/parameters/debug_mask': No such file or directory
  762. [ 5.261678] init: Starting service 'netd'...
  763. [ 5.262766] init: Starting service 'debuggerd'...
  764. [ 5.263357] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
  765. [ 5.263952] init: Starting service 'ril-daemon'...
  766. [ 5.265178] init: Starting service 'drm'...
  767. [ 5.266667] init: Starting service 'media'...
  768. [ 5.267714] logd.daemon: reinit
  769. [ 5.267759] init: Starting service 'installd'...
  770. [ 5.270042] init: Starting service 'flash_recovery'...
  771. [ 5.271189] init: Starting service 'keystore'...
  772. [ 5.272488] init: Starting service 'bridgemgrd'...
  773. [ 5.273647] init: Starting service 'qmuxd'...
  774. [ 5.275098] init: Starting service 'netmgrd'...
  775. [ 5.276205] init: Starting service 'sensors'...
  776. [ 5.277303] init: Starting service 'irsc_util'...
  777. [ 5.291032] init: Starting service 'bdAddrLoader'...
  778. [ 5.292362] init: Starting service 'thermal-engine'...
  779. [ 5.358671] init: Starting service 'zygote'...
  780. [ 5.359419] init: Service 'logd-reinit' (pid 332) exited with status 0
  781. [ 5.360066] init: Starting service 'gatekeeperd'...
  782. [ 5.360504] init: cannot find '/system/xbin/perfprofd', disabling 'perfprofd'
  783. [ 5.360838] init: Starting service 'qcamerasvr'...
  784. [ 5.361394] init: Starting service 'time_daemon'...
  785. [ 5.361755] init: Starting service 'daemonsu'...
  786. [ 5.362239] android_usb: already disabled
  787. [ 5.362728] init: Starting service 'adbd'...
  788. [ 5.365464] adb_open
  789. [ 5.365589] mtp_bind_config
  790. [ 5.365651] adb_bind_config
  791. [ 5.480968] type=1400 audit(1529535.080:5): avc: denied { getattr } for pid=379 comm="ps" path="/proc/148" dev="proc" ino=6085 scontext=u:r:init:s0 tcontext=u:r:logd:s0 tclass=dir permissive=1
  792. [ 5.499637] init: Service 'irsc_util' (pid 351) exited with status 0
  793. [ 5.500907] init: Service 'bdAddrLoader' (pid 352) exited with status 1
  794. [ 5.511282] init: Service 'daemonsu' (pid 359) exited with status 0
  795. [ 5.595304] pil-q6v5-mss fc880000.qcom,mss: mba: Brought out of reset
  796. [ 5.775912] QSEECOM: qseecom_load_app: App (keymaster) does'nt exist, loading apps for first time
  797. [ 5.780784] QSEECOM: qseecom_load_app: App with id 2 (keymaster) now loaded
  798. [ 5.939857] alarm_set_rtc: Failed to set RTC, time will be lost on reboot
  799. [ 6.008312] msm_thermal: Set Offline: CPU3 Temp: 81
  800. [ 6.071557] MSM-CPP cpp_load_fw:825 MC Bootloader Version: 0x312e3176
  801. [ 6.077747] MSM-CPP cpp_load_fw:838 CPP FW Version: 0x10020003
  802. [ 6.079870] MSM-CPP cpp_close_node:911 cpp_close_node: irq_status: 0x23f
  803. [ 6.079959] MSM-CPP cpp_close_node:913 cpp_close_node: DEBUG_SP: 0x0
  804. [ 6.080036] MSM-CPP cpp_close_node:915 cpp_close_node: DEBUG_T: 0x0
  805. [ 6.080080] MSM-CPP cpp_close_node:917 cpp_close_node: DEBUG_N: 0x0
  806. [ 6.080160] MSM-CPP cpp_close_node:919 cpp_close_node: DEBUG_R: 0x0
  807. [ 6.080205] MSM-CPP cpp_close_node:921 cpp_close_node: DEBUG_OPPC: 0x0
  808. [ 6.080282] MSM-CPP cpp_close_node:923 cpp_close_node: DEBUG_MO: 0x0
  809. [ 6.080326] MSM-CPP cpp_close_node:925 cpp_close_node: DEBUG_TIMER0: 0x0
  810. [ 6.080405] MSM-CPP cpp_close_node:927 cpp_close_node: DEBUG_TIMER1: 0x0
  811. [ 6.080484] MSM-CPP cpp_close_node:929 cpp_close_node: DEBUG_GPI: 0x0
  812. [ 6.080529] MSM-CPP cpp_close_node:931 cpp_close_node: DEBUG_GPO: 0x0
  813. [ 6.080605] MSM-CPP cpp_close_node:933 cpp_close_node: DEBUG_T0: 0x0
  814. [ 6.080651] MSM-CPP cpp_close_node:935 cpp_close_node: DEBUG_R0: 0x0
  815. [ 6.080729] MSM-CPP cpp_close_node:937 cpp_close_node: DEBUG_T1: 0x0
  816. [ 6.080771] MSM-CPP cpp_close_node:939 cpp_close_node: DEBUG_R1: 0x0
  817. [ 6.093072] batt_tm_worker: No charger.
  818. [ 6.093125] batt_tm_worker: set new threshold : low_temp = 430 high_temp = 550
  819. [ 6.094257] max17048_external_power_changed: power supply changed state = 2 health = 2
  820. [ 6.126012] msm_thermal: Frequency mitigation task is not initialized
  821. [ 6.126157] msm_thermal: Frequency mitigation task is not initialized
  822. [ 6.126289] msm_thermal: Frequency mitigation task is not initialized
  823. [ 6.126371] msm_thermal: Frequency mitigation task is not initialized
  824. [ 6.138582] msm_thermal: enabled = 0
  825. [ 6.144737] init: Service 'flash_recovery' (pid 345) exited with status 0
  826. [ 6.251427] healthd: wakealarm_init: timerfd_create failed
  827. [ 6.369522] msm_sensor_config:1751 sensor state 1
  828. [ 6.383040] msm_init_ois:319 msm_init_ois : OIS chipid=1
  829. [ 6.394663] MSM-CPP cpp_load_fw:825 MC Bootloader Version: 0x312e3176
  830. [ 6.400178] MSM-CPP cpp_load_fw:838 CPP FW Version: 0x10020003
  831. [ 6.493801] init: Starting service 'bootanim'...
  832. [ 6.503062] msm_sensor_config:1779 sensor state 0
  833. [ 6.506174] MSM-CPP cpp_close_node:911 cpp_close_node: irq_status: 0x23f
  834. [ 6.506349] MSM-CPP cpp_close_node:913 cpp_close_node: DEBUG_SP: 0x0
  835. [ 6.506477] MSM-CPP cpp_close_node:915 cpp_close_node: DEBUG_T: 0x0
  836. [ 6.506646] MSM-CPP cpp_close_node:917 cpp_close_node: DEBUG_N: 0x0
  837. [ 6.506696] MSM-CPP cpp_close_node:919 cpp_close_node: DEBUG_R: 0x0
  838. [ 6.506784] MSM-CPP cpp_close_node:921 cpp_close_node: DEBUG_OPPC: 0x0
  839. [ 6.506864] MSM-CPP cpp_close_node:923 cpp_close_node: DEBUG_MO: 0x0
  840. [ 6.506912] MSM-CPP cpp_close_node:925 cpp_close_node: DEBUG_TIMER0: 0x0
  841. [ 6.506997] MSM-CPP cpp_close_node:927 cpp_close_node: DEBUG_TIMER1: 0x0
  842. [ 6.507042] MSM-CPP cpp_close_node:929 cpp_close_node: DEBUG_GPI: 0x0
  843. [ 6.507134] MSM-CPP cpp_close_node:931 cpp_close_node: DEBUG_GPO: 0x0
  844. [ 6.507185] MSM-CPP cpp_close_node:933 cpp_close_node: DEBUG_T0: 0x0
  845. [ 6.507264] MSM-CPP cpp_close_node:935 cpp_close_node: DEBUG_R0: 0x0
  846. [ 6.507373] MSM-CPP cpp_close_node:937 cpp_close_node: DEBUG_T1: 0x0
  847. [ 6.507436] MSM-CPP cpp_close_node:939 cpp_close_node: DEBUG_R1: 0x0
  848. [ 6.648652] msm_sensor_config:1751 sensor state 1
  849. [ 6.668354] msm_sensor_config_mt9m114b:1340 [CMD_POLLING] success (cnt=1)
  850. [ 6.688669] msm_sensor_config_mt9m114b:1340 [CMD_POLLING] success (cnt=1)
  851. [ 6.768403] msm_sensor_config_mt9m114b:1340 [CMD_POLLING] success (cnt=4)
  852. [ 6.786269] MSM-CPP cpp_load_fw:825 MC Bootloader Version: 0x312e3176
  853. [ 6.792186] MSM-CPP cpp_load_fw:838 CPP FW Version: 0x10020003
  854. [ 6.973719] msm_sensor_config:1779 sensor state 0
  855. [ 6.976952] MSM-CPP cpp_close_node:911 cpp_close_node: irq_status: 0x23f
  856. [ 6.977042] MSM-CPP cpp_close_node:913 cpp_close_node: DEBUG_SP: 0x0
  857. [ 6.977130] MSM-CPP cpp_close_node:915 cpp_close_node: DEBUG_T: 0x0
  858. [ 6.977186] MSM-CPP cpp_close_node:917 cpp_close_node: DEBUG_N: 0x0
  859. [ 6.977272] MSM-CPP cpp_close_node:919 cpp_close_node: DEBUG_R: 0x0
  860. [ 6.977335] MSM-CPP cpp_close_node:921 cpp_close_node: DEBUG_OPPC: 0x0
  861. [ 6.977437] MSM-CPP cpp_close_node:923 cpp_close_node: DEBUG_MO: 0x0
  862. [ 6.977495] MSM-CPP cpp_close_node:925 cpp_close_node: DEBUG_TIMER0: 0x0
  863. [ 6.977632] MSM-CPP cpp_close_node:927 cpp_close_node: DEBUG_TIMER1: 0x0
  864. [ 6.977815] MSM-CPP cpp_close_node:929 cpp_close_node: DEBUG_GPI: 0x0
  865. [ 6.977907] MSM-CPP cpp_close_node:931 cpp_close_node: DEBUG_GPO: 0x0
  866. [ 6.978483] MSM-CPP cpp_close_node:933 cpp_close_node: DEBUG_T0: 0x0
  867. [ 6.978586] MSM-CPP cpp_close_node:935 cpp_close_node: DEBUG_R0: 0x0
  868. [ 6.978732] MSM-CPP cpp_close_node:937 cpp_close_node: DEBUG_T1: 0x0
  869. [ 6.978784] MSM-CPP cpp_close_node:939 cpp_close_node: DEBUG_R1: 0x0
  870. [ 7.149828] type=1400 audit(1475873039.670:6): avc: denied { read } for pid=355 comm="zygote" name="input" dev="tmpfs" ino=5737 scontext=u:r:zygote:s0 tcontext=u:object_r:input_device:s0 tclass=dir permissive=0
  871. [ 7.413109] mdss_dsi_cont_splash_on:685 DSI on for continuous splash.
  872. [ 7.424465] mdss_dsi_on:485 Panel already on.
  873. [ 7.653253] pil-q6v5-mss fc880000.qcom,mss: modem: Brought out of reset
  874. [ 7.719487] Notify: smsm init
  875. [ 7.756635] subsys-restart: subsys_err_ready_intr_handler(): Error ready interrupt occured for modem
  876. [ 7.875832] apr_tal:Modem Is Up
  877. [ 7.931857] diag: In diag_send_msg_mask_update, invalid status 0
  878. [ 7.953387] diag: In diag_process_smd_cntl_read_data, Memory alloc fail
  879. [ 8.358384] sps:BAM 0xfc834000 is registered.
  880. [ 8.365679] sps:BAM 0xfc834000 (va:0xf0d98000) enabled: ver:0x20, number of pipes:6
  881. [ 8.965967] SysRq : Emergency Remount R/O
  882. [ 8.979793] EXT4-fs (mmcblk0p28): re-mounted. Opts: (null)
  883. [ 8.989252] EXT4-fs (mmcblk0p27): re-mounted. Opts: (null)
  884. [ 9.002432] EXT4-fs (mmcblk0p16): re-mounted. Opts: (null)
  885. [ 9.002989] loop: Write error at byte offset 569344, length 4096.
  886. [ 9.003033] Buffer I/O error on device loop0, logical block 139
  887. [ 9.003117] lost page write due to I/O error on loop0
  888. [ 9.003167] JBD2: Error -5 detected when updating journal superblock for loop0-8.
  889. [ 9.003256] loop: Write error at byte offset 569344, length 4096.
  890. [ 9.003298] Buffer I/O error on device loop0, logical block 139
  891. [ 9.003372] lost page write due to I/O error on loop0
  892. [ 9.003430] JBD2: Error -5 detected when updating journal superblock for loop0-8.
  893. [ 9.003547] loop: Write error at byte offset 0, length 4096.
  894. [ 9.003597] Buffer I/O error on device loop0, logical block 0
  895. [ 9.003673] lost page write due to I/O error on loop0
  896. [ 9.003722] EXT4-fs (loop0): re-mounted. Opts: (null)
  897. [ 9.003898] Emergency Remount complete
  898. [ 9.067583] mdss_fb_release_all: try to close unopened fb 2! from init
  899. [ 9.067674] mdss_fb_release_all: try to close unopened fb 1! from init
  900. [ 9.072130] mdss_fb_release_all: unknown process init pid=1 mfd->ref=0
  901. [ 9.296269] mdss_dsi_panel_off:
  902. [ 9.319927] [Touch] touch off
  903. [ 9.349087] Restarting system with command ''.
  904. [ 9.349190] Going down for restart now
  905. [ 9.350730] Calling SCM to disable SPMI PMIC arbiter
  906.  
  907. No errors detected
  908. Boot info:
  909. Last boot reason: reboot
RAW Paste Data