API tools faq
paste
Guest User

Untitled

a guest
Dec 27th, 2024
38
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 22.69 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 5.10.176 (gl-ci@gl-ci-server) (mips-openwrt-linux-musl-gcc (OpenWrt GCC 11.2.0 r20123-38ccc47687) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 Sun Apr 9 12:27:46 2023
  2. [ 0.000000] printk: bootconsole [early0] enabled
  3. [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
  4. [ 0.000000] MIPS: machine is GL.iNet GL-E750
  5. [ 0.000000] SoC: Qualcomm Atheros QCA9533 ver 2 rev 0
  6. [ 0.000000] Initrd not found or empty - disabling initrd
  7. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  8. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  9. [ 0.000000] Zone ranges:
  10. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
  11. [ 0.000000] Movable zone start for each node
  12. [ 0.000000] Early memory node ranges
  13. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
  14. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
  15. [ 0.000000] On node 0 totalpages: 32768
  16. [ 0.000000] Normal zone: 288 pages used for memmap
  17. [ 0.000000] Normal zone: 0 pages reserved
  18. [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
  19. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  20. [ 0.000000] pcpu-alloc: [0] 0
  21. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480
  22. [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
  23. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
  24. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
  25. [ 0.000000] Writing ErrCtl register=00000000
  26. [ 0.000000] Readback ErrCtl register=00000000
  27. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  28. [ 0.000000] Memory: 120000K/131072K available (6401K kernel code, 597K rwdata, 1340K rodata, 1188K init, 214K bss, 11072K reserved, 0K cma-reserved)
  29. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  30. [ 0.000000] NR_IRQS: 51
  31. [ 0.000000] CPU clock: 650.000 MHz
  32. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5880801374 ns
  33. [ 0.000009] sched_clock: 32 bits at 325MHz, resolution 3ns, wraps every 6607641598ns
  34. [ 0.008323] Calibrating delay loop... 432.53 BogoMIPS (lpj=2162688)
  35. [ 0.074928] pid_max: default: 32768 minimum: 301
  36. [ 0.079971] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  37. [ 0.087676] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  38. [ 0.098215] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
  39. [ 0.109348] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  40. [ 0.119768] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
  41. [ 0.127060] pinctrl core: initialized pinctrl subsystem
  42. [ 0.137524] NET: Registered protocol family 16
  43. [ 0.143042] thermal_sys: Registered thermal governor 'step_wise'
  44. [ 0.207412] clocksource: Switched to clocksource MIPS
  45. [ 0.220500] NET: Registered protocol family 2
  46. [ 0.225346] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
  47. [ 0.233888] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
  48. [ 0.242836] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
  49. [ 0.250941] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
  50. [ 0.258392] TCP: Hash tables configured (established 1024 bind 1024)
  51. [ 0.265258] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
  52. [ 0.272223] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
  53. [ 0.279941] NET: Registered protocol family 1
  54. [ 0.284568] PCI: CLS 0 bytes, default 32
  55. [ 0.295729] workingset: timestamp_bits=14 max_order=15 bucket_order=1
  56. [ 0.307541] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  57. [ 0.313699] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  58. [ 0.326087] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  59. [ 0.337500] pinctrl-single 1804002c.pinmux: 576 pins, size 72
  60. [ 0.344406] gpio-export gpio-export: 4 gpio(s) exported
  61. [ 0.350794] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  62. [ 0.360064] printk: console [ttyS0] disabled
  63. [ 0.364648] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 1562500) is a 16550A
  64. [ 0.373813] printk: console [ttyS0] enabled
  65. [ 0.382881] printk: bootconsole [early0] disabled
  66. [ 0.413461] spi-nand spi0.1: Macronix SPI NAND was found.
  67. [ 0.419139] spi-nand spi0.1: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64
  68. [ 0.430420] 1 fixed-partitions partitions found on MTD device (null)
  69. [ 0.437002] Creating 1 MTD partitions on "(null)":
  70. [ 0.442013] 0x000000000000-0x000008000000 : "ubi"
  71. [ 0.554602] spi-nor spi0.0: w25q128 (16384 Kbytes)
  72. [ 0.559703] 6 fixed-partitions partitions found on MTD device spi0.0
  73. [ 0.566308] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions
  74. [ 0.573185] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions
  75. [ 0.580520] Creating 6 MTD partitions on "spi0.0":
  76. [ 0.585483] 0x000000000000-0x000000040000 : "u-boot"
  77. [ 0.595183] 0x000000040000-0x000000050000 : "u-boot-env"
  78. [ 0.601885] 0x000000050000-0x000000060000 : "art"
  79. [ 0.609720] 0x000000060000-0x000000460000 : "kernel"
  80. [ 0.615997] 0x000000460000-0x000000fe0000 : "reserved"
  81. [ 0.624159] 0x000000fe0000-0x000001000000 : "log"
  82. [ 1.257882] mdio.0:1f: Found an AR934X built-in switch
  83. [ 1.659482] ag71xx 19000000.eth: connected to PHY at mdio.0:1f:04 [uid=004dd042, driver=Generic PHY]
  84. [ 1.669648] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: mii
  85. [ 1.677854] NET: Registered protocol family 10
  86. [ 1.689118] Segment Routing with IPv6
  87. [ 1.693036] NET: Registered protocol family 17
  88. [ 1.697798] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  89. [ 1.711196] 8021q: 802.1Q VLAN Support v1.8
  90. [ 1.720986] PCI host bridge /ahb/pcie-controller@180c0000 ranges:
  91. [ 1.727330] MEM 0x0000000010000000..0x0000000013ffffff
  92. [ 1.732788] IO 0x0000000000000000..0x0000000000000000
  93. [ 1.738395] PCI host bridge to bus 0000:00
  94. [ 1.742644] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
  95. [ 1.749785] pci_bus 0000:00: root bus resource [io 0x0000]
  96. [ 1.755544] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
  97. [ 1.762562] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  98. [ 1.770809] pci 0000:00:00.0: [168c:0050] type 00 class 0x028000
  99. [ 1.777048] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
  100. [ 1.784119] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
  101. [ 1.791147] pci 0000:00:00.0: supports D1
  102. [ 1.795290] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  103. [ 1.802330] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
  104. [ 1.809233] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x101fffff 64bit]
  105. [ 1.816807] pci 0000:00:00.0: BAR 6: assigned [mem 0x10200000-0x1020ffff pref]
  106. [ 1.828437] UBI: auto-attach mtd0
  107. [ 1.831908] ubi0: attaching mtd0
  108. [ 4.399937] ubi0: scanning is finished
  109. [ 4.436230] ubi0: attached mtd0 (name "ubi", size 128 MiB)
  110. [ 4.441972] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  111. [ 4.449092] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  112. [ 4.456103] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  113. [ 4.463306] ubi0: good PEBs: 1022, bad PEBs: 2, corrupted PEBs: 0
  114. [ 4.469607] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
  115. [ 4.477063] ubi0: max/mean erase counter: 14/7, WL threshold: 4096, image sequence number: 1681043266
  116. [ 4.486586] ubi0: available PEBs: 0, total reserved PEBs: 1022, PEBs reserved for bad PEB handling: 18
  117. [ 4.496316] ubi0: background thread "ubi_bgt0d" started, PID 324
  118. [ 4.505633] block ubiblock0_0: created from ubi0:0(rootfs)
  119. [ 4.511382] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
  120. [ 4.541539] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
  121. [ 4.556265] Freeing unused kernel memory: 1188K
  122. [ 4.560991] This architecture does not have kernel memory protection.
  123. [ 4.567669] Run /sbin/init as init process
  124. [ 4.571899] with arguments:
  125. [ 4.571904] /sbin/init
  126. [ 4.571908] with environment:
  127. [ 4.571912] HOME=/
  128. [ 4.571917] TERM=linux
  129. [ 5.446886] init: Console is alive
  130. [ 5.451069] init: - watchdog -
  131. [ 8.429910] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  132. [ 8.569448] install gl_hw_info
  133. [ 8.605693] usbcore: registered new interface driver usbfs
  134. [ 8.611527] usbcore: registered new interface driver hub
  135. [ 8.617128] usbcore: registered new device driver usb
  136. [ 8.672922] gl-tertf: (C) 2021 jianhui zhao <[email protected]>
  137. [ 8.689329] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  138. [ 8.706325] SCSI subsystem initialized
  139. [ 8.718647] fsl-ehci: Freescale EHCI Host controller driver
  140. [ 8.726692] ehci-platform: EHCI generic platform driver
  141. [ 8.732597] ehci-platform 1b000000.usb: EHCI Host Controller
  142. [ 8.738530] ehci-platform 1b000000.usb: new USB bus registered, assigned bus number 1
  143. [ 8.746753] ehci-platform 1b000000.usb: irq 3, io mem 0x1b000000
  144. [ 8.777436] ehci-platform 1b000000.usb: USB 2.0 started, EHCI 1.00
  145. [ 8.784851] hub 1-0:1.0: USB hub found
  146. [ 8.789678] hub 1-0:1.0: 1 port detected
  147. [ 8.802823] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  148. [ 8.811300] ohci-platform: OHCI generic platform driver
  149. [ 8.821066] uhci_hcd: USB Universal Host Controller Interface driver
  150. [ 8.833849] usbcore: registered new interface driver usb-storage
  151. [ 8.841758] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  152. [ 8.849712] kmodloader: ["gl_system": "kernel_load"]
  153. [ 8.865414] init: - preinit -
  154. [ 9.377501] usb 1-1: new high-speed USB device number 2 using ehci-platform
  155. [ 9.626445] hub 1-1:1.0: USB hub found
  156. [ 9.632664] hub 1-1:1.0: 4 ports detected
  157. [ 9.907735] random: procd: uninitialized urandom read (4 bytes read)
  158. [ 10.097506] usb 1-1.1: new high-speed USB device number 3 using ehci-platform
  159. [ 10.278355] usb-storage 1-1.1:1.0: USB Mass Storage device detected
  160. [ 10.302068] scsi host0: usb-storage 1-1.1:1.0
  161. [ 10.608099] random: jshn: uninitialized urandom read (4 bytes read)
  162. [ 11.199030] random: jshn: uninitialized urandom read (4 bytes read)
  163. [ 11.224122] random: jshn: uninitialized urandom read (4 bytes read)
  164. [ 11.323242] random: jshn: uninitialized urandom read (4 bytes read)
  165. [ 11.379268] scsi 0:0:0:0: Direct-Access Generic STORAGE DEVICE 0233 PQ: 0 ANSI: 0
  166. [ 12.500752] sd 0:0:0:0: [sda] Attached SCSI removable disk
  167. [ 14.167418] usb 1-1.2: new high-speed USB device number 4 using ehci-platform
  168. [ 14.318246] usb 1-1.2: config 1 has an invalid interface number: 12 but max is 5
  169. [ 14.325908] usb 1-1.2: config 1 has no interface number 5
  170. [ 16.848970] mount_root: loading kmods from internal overlay
  171. [ 16.950569] kmodloader: loading kernel modules from //etc/modules-boot.d/*
  172. [ 16.974154] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
  173. [ 16.982203] kmodloader: ["gl_system": "kernel_load"]
  174. [ 21.216636] UBIFS (ubi0:1): Mounting in unauthenticated mode
  175. [ 21.227979] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 520
  176. [ 21.390085] UBIFS (ubi0:1): recovery needed
  177. [ 21.929586] UBIFS (ubi0:1): recovery completed
  178. [ 21.934308] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
  179. [ 21.942437] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  180. [ 21.952708] UBIFS (ubi0:1): FS size: 106532864 bytes (101 MiB, 839 LEBs), journal size 5332992 bytes (5 MiB, 42 LEBs)
  181. [ 21.963667] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
  182. [ 21.970509] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 50A4A791-2685-4818-B7E2-5B8B4C9CE67E, small LPT model
  183. [ 21.990925] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
  184. [ 21.998703] block: unable to load configuration (fstab: Entry not found)
  185. [ 22.006046] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab
  186. [ 22.013288] block: unable to load configuration (fstab: Entry not found)
  187. [ 22.020729] block: attempting to load /etc/config/fstab
  188. [ 22.026633] block: unable to load configuration (fstab: Entry not found)
  189. [ 22.034051] block: no usable configuration
  190. [ 22.038682] UBIFS (ubi0:1): un-mount UBI device 0
  191. [ 22.043599] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
  192. [ 22.060538] UBIFS (ubi0:1): Mounting in unauthenticated mode
  193. [ 22.078013] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 523
  194. [ 22.414452] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
  195. [ 22.422603] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  196. [ 22.432853] UBIFS (ubi0:1): FS size: 106532864 bytes (101 MiB, 839 LEBs), journal size 5332992 bytes (5 MiB, 42 LEBs)
  197. [ 22.443815] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
  198. [ 22.450656] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 50A4A791-2685-4818-B7E2-5B8B4C9CE67E, small LPT model
  199. [ 25.900782] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
  200. [ 25.908643] block: unable to load configuration (fstab: Entry not found)
  201. [ 25.916004] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab
  202. [ 25.923292] block: unable to load configuration (fstab: Entry not found)
  203. [ 25.930757] block: attempting to load /etc/config/fstab
  204. [ 25.936641] block: unable to load configuration (fstab: Entry not found)
  205. [ 25.945469] block: no usable configuration
  206. [ 25.956388] mount_root: overlay filesystem has not been fully initialized yet
  207. [ 25.966656] mount_root: switching to ubifs overlay
  208. [ 26.004130] urandom-seed: Seed file not found (/etc/urandom.seed)
  209. [ 26.258129] procd: - early -
  210. [ 26.261545] procd: - watchdog -
  211. [ 27.476853] random: jshn: uninitialized urandom read (4 bytes read)
  212. [ 27.537573] procd: - watchdog -
  213. [ 27.637745] procd: - ubus -
  214. [ 28.097741] random: ubusd: uninitialized urandom read (4 bytes read)
  215. [ 28.107153] random: ubusd: uninitialized urandom read (4 bytes read)
  216. [ 28.138186] procd: - init -
  217. [ 29.185706] random: jshn: uninitialized urandom read (4 bytes read)
  218. [ 29.225111] random: ubusd: uninitialized urandom read (4 bytes read)
  219. [ 31.012861] mtdoops: ready 0, 1 (no erase)
  220. [ 31.012877] mtdoops: Attached to MTD device 6
  221. [ 32.206117] urngd: v1.0.2 started.
  222. [ 32.661015] kmodloader: loading kernel modules from /etc/modules.d/*
  223. [ 33.127465] random: crng init done
  224. [ 33.130998] random: 54 urandom warning(s) missed due to ratelimiting
  225. [ 33.573682] ntfs: driver 2.1.32 [Flags: R/O MODULE].
  226. [ 33.641581] tun: Universal TUN/TAP device driver, 1.6
  227. [ 33.955637] GACT probability on
  228. [ 33.969453] Mirror/redirect action on
  229. [ 34.002060] u32 classifier
  230. [ 34.004874] input device check on
  231. [ 34.008731] Actions configured
  232. [ 34.057138] fuse: init (API version 7.32)
  233. [ 34.139603] Bridge firewalling registered
  234. [ 34.150894] usbcore: registered new interface driver cdc_acm
  235. [ 34.156756] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  236. [ 34.185549] usbcore: registered new interface driver cdc_wdm
  237. [ 34.208785] Loading modules backported from Linux version v5.15.92-0-ge515b9902f5f
  238. [ 34.216625] Backport generated by backports.git v5.15.92-1-0-gdfe0f60c
  239. [ 34.249787] usbcore: registered new interface driver ipheth
  240. [ 34.474335] usbcore: registered new interface driver usbserial_generic
  241. [ 34.481287] usbserial: USB Serial support registered for generic
  242. [ 34.523708] wireguard: WireGuard 1.0.20220627 loaded. See www.wireguard.com for information.
  243. [ 34.532510] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <[email protected]>. All Rights Reserved.
  244. [ 34.703201] xt_time: kernel timezone is -0000
  245. [ 34.721238] usbcore: registered new interface driver cdc_ether
  246. [ 34.740787] usbcore: registered new interface driver cdc_ncm
  247. [ 34.842805] usbcore: registered new interface driver huawei_cdc_ncm
  248. [ 35.724687] PPP generic driver version 2.4.2
  249. [ 35.749334] NET: Registered protocol family 24
  250. [ 35.770339] qmi_wwan 1-1.2:1.4: cdc-wdm0: USB WDM device
  251. [ 35.783702] qmi_wwan 1-1.2:1.4: QuectelEC25&EC21&EG91&EG95&EG06&EP06&EM06&BG96&AG35 qmi wwan detected
  252. [ 35.794297] qmi_wwan 1-1.2:1.4 wwan0: register 'qmi_wwan' at usb-1b000000.usb-1.2, WWAN/QMI device, be:57:cd:5c:6e:e1
  253. [ 35.805630] usbcore: registered new interface driver qmi_wwan
  254. [ 35.851199] usbcore: registered new interface driver rndis_host
  255. [ 35.957765] ath10k_pci 0000:00:00.0: enabling device (0000 -> 0002)
  256. [ 35.966515] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
  257. [ 50.658393] ath10k_pci 0000:00:00.0: qca9887 hw1.0 target 0x4100016d chip_id 0x004000ff sub 0000:0000
  258. [ 50.667973] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
  259. [ 50.680965] ath10k_pci 0000:00:00.0: firmware ver 10.2.4-1.0-00047 api 5 features no-p2p,ignore-otp,skip-clock-init,mfp,allows-mesh-bcast crc32 62f7565f
  260. [ 51.463390] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 546cca0d
  261. [ 51.471358] ath10k_pci 0000:00:00.0: failed to read device EEPROM at 0000
  262. [ 51.478394] ath10k_pci 0000:00:00.0: failed to read calibration data from EEPROM: -22
  263. [ 52.637345] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
  264. [ 52.779136] ath: EEPROM regdomain: 0x0
  265. [ 52.779149] ath: EEPROM indicates default country code should be used
  266. [ 52.779154] ath: doing EEPROM country->regdmn map search
  267. [ 52.779167] ath: country maps to regdmn code: 0x3a
  268. [ 52.779174] ath: Country alpha2 being used: US
  269. [ 52.779178] ath: Regpair used: 0x3a
  270. [ 52.858707] usbcore: registered new interface driver option
  271. [ 52.864555] usbserial: USB Serial support registered for GSM modem (1-port)
  272. [ 52.872240] option 1-1.2:1.0: GSM modem (1-port) converter detected
  273. [ 52.879062] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB0
  274. [ 52.886435] option 1-1.2:1.1: GSM modem (1-port) converter detected
  275. [ 52.893302] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB1
  276. [ 52.900776] option 1-1.2:1.2: GSM modem (1-port) converter detected
  277. [ 52.907649] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB2
  278. [ 52.915027] option 1-1.2:1.3: GSM modem (1-port) converter detected
  279. [ 52.921881] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB3
  280. [ 53.059008] ath: EEPROM regdomain: 0x0
  281. [ 53.059025] ath: EEPROM indicates default country code should be used
  282. [ 53.059030] ath: doing EEPROM country->regdmn map search
  283. [ 53.059046] ath: country maps to regdmn code: 0x3a
  284. [ 53.059053] ath: Country alpha2 being used: US
  285. [ 53.059058] ath: Regpair used: 0x3a
  286. [ 53.071415] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
  287. [ 53.073791] ieee80211 phy1: Atheros AR9531 Rev:2 mem=0xb8100000, irq=13
  288. [ 53.119390] kmodloader: done loading kernel modules from /etc/modules.d/*
  289. [ 53.126797] kmodloader: ["gl_system": "kernel_load"]
  290. [ 160.572439] tertf: br-lan registered, add it
  291. [ 160.617347] br-lan: port 1(eth0) entered blocking state
  292. [ 160.617368] br-lan: port 1(eth0) entered disabled state
  293. [ 160.617815] device eth0 entered promiscuous mode
  294. [ 171.335611] br-lan: port 2(wlan0) entered blocking state
  295. [ 171.335632] br-lan: port 2(wlan0) entered disabled state
  296. [ 171.336066] device wlan0 entered promiscuous mode
  297. [ 171.336218] br-lan: port 2(wlan0) entered blocking state
  298. [ 171.336231] br-lan: port 2(wlan0) entered forwarding state
  299. [ 171.563494] br-lan: port 2(wlan0) entered disabled state
  300. [ 172.059611] ath10k_pci 0000:00:00.0: failed to read device EEPROM at 0000
  301. [ 172.059637] ath10k_pci 0000:00:00.0: failed to read calibration data from EEPROM: -22
  302. [ 178.743208] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware
  303. [ 178.764367] br-lan: port 3(wlan1) entered blocking state
  304. [ 178.764388] br-lan: port 3(wlan1) entered disabled state
  305. [ 178.764756] device wlan1 entered promiscuous mode
  306. [ 178.764894] br-lan: port 3(wlan1) entered blocking state
  307. [ 178.764907] br-lan: port 3(wlan1) entered forwarding state
  308. [ 178.800389] br-lan: port 3(wlan1) entered disabled state
  309. [ 182.882982] br-lan: port 3(wlan1) entered blocking state
  310. [ 182.883005] br-lan: port 3(wlan1) entered forwarding state
  311. [ 191.136645] br-lan: port 2(wlan0) entered blocking state
  312. [ 191.136669] br-lan: port 2(wlan0) entered forwarding state
  313. [ 193.483020] wifidog-ng: Copyright (C) 2017 jianhui zhao <[email protected]>
  314. [ 193.487049] wifidog-ng: enabled
  315. [ 193.487078] wifidog-ng: Found ip from br-lan: 192.168.8.1
  316. [ 777.772863] br-lan: port 3(wlan1) entered disabled state
  317. [ 777.773021] br-lan: port 2(wlan0) entered disabled state
  318. [ 777.789863] device eth0 left promiscuous mode
  319. [ 777.790049] br-lan: port 1(eth0) entered disabled state
  320. [ 777.820818] device wlan0 left promiscuous mode
  321. [ 777.820976] br-lan: port 2(wlan0) entered disabled state
  322. [ 777.827940] device wlan1 left promiscuous mode
  323. [ 777.828102] br-lan: port 3(wlan1) entered disabled state
  324. [ 777.841462] tertf: br-lan changed, delete it
  325. [ 792.280336] tertf: br-lan registered, add it
  326. [ 792.305915] br-lan: port 1(eth0) entered blocking state
  327. [ 792.305937] br-lan: port 1(eth0) entered disabled state
  328. [ 792.306316] device eth0 entered promiscuous mode
  329. [ 804.344028] br-lan: port 2(wlan0) entered blocking state
  330. [ 804.344049] br-lan: port 2(wlan0) entered disabled state
  331. [ 804.344464] device wlan0 entered promiscuous mode
  332. [ 804.853524] ath10k_pci 0000:00:00.0: failed to read device EEPROM at 0000
  333. [ 804.853550] ath10k_pci 0000:00:00.0: failed to read calibration data from EEPROM: -22
  334. [ 811.054314] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware
  335. [ 811.098741] br-lan: port 3(wlan1) entered blocking state
  336. [ 811.098762] br-lan: port 3(wlan1) entered disabled state
  337. [ 811.116543] device wlan1 entered promiscuous mode
  338. [ 815.411968] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
  339. [ 815.412289] br-lan: port 3(wlan1) entered blocking state
  340. [ 815.412306] br-lan: port 3(wlan1) entered forwarding state
  341. [ 815.415973] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  342. [ 818.894913] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  343. [ 818.895193] br-lan: port 2(wlan0) entered blocking state
  344. [ 818.895210] br-lan: port 2(wlan0) entered forwarding state
  345.  
  346.  
Tags: GL.iNet system.log
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!