API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Mar 18th, 2017
322
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 28.25 KB | None | 0 0
raw download clone embed print report
  1. HELLO! BOOT0 is starting!
  2. boot0 commit : 045061a8bb2580cb3fa02e301f52a015040c158f
  3.  
  4. boot0 version : 4.0.0
  5. set pll start
  6. set pll end
  7. rtc[0] value = 0x00000000
  8. rtc[1] value = 0x00000000
  9. rtc[2] value = 0x00000000
  10. rtc[3] value = 0x00000000
  11. rtc[4] value = 0x00000000
  12. rtc[5] value = 0x00000000
  13. DRAM driver version: V1.1
  14. rsb_send_initseq: rsb clk 400Khz -> 3Mhz
  15. PMU: AXP81X
  16. ddr voltage = 1500 mv
  17. DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  18. DRAM clk = 672 MHz
  19. DRAM zq value: 003b3bbb
  20. DRAM single rank full DQ OK
  21. DRAM size = 2048 MB
  22. DRAM init ok
  23. dram size =2048
  24. card boot number = 0, boot0 copy = 0
  25. card no is 0
  26. sdcard 0 line count 4
  27. [mmc]: mmc driver ver 2015-05-08 20:06
  28. [mmc]: sdc0 spd mode error, 2
  29. [mmc]: Wrong media type 0x00000000
  30. [mmc]: ***Try SD card 0***
  31. [mmc]: HSSDR52/SDR25 4 bit
  32. [mmc]: 50000000 Hz
  33. [mmc]: 15193 MB
  34. [mmc]: ***SD/MMC 0 init OK!!!***
  35. sdcard 0 init ok
  36. The size of uboot is 00064000.
  37. sum=0540847d
  38. src_sum=0540847d
  39. Succeed in loading uboot from sdmmc flash.
  40. boot0: start load other image
  41. boot0: Loading BL3-1
  42. Loading file 0 at address 0x40000000,size 0x00000200 success
  43. boot0: Loading scp
  44. Loading file 2 at address 0x00040000,size 0x0000b200 success
  45. set arisc reset to de-assert state
  46. Ready to disable icache.
  47. Jump to secend Boot.
  48. NOTICE: BL3-1: Running in SRAM A2 (@0x44000)
  49. NOTICE: Configuring SPC Controller
  50. NOTICE: BL3-1: v1.0(debug):467f187
  51. NOTICE: BL3-1: Built : 01:23:55, Jun 1 2016
  52. NOTICE: Configuring AXP PMIC
  53. NOTICE: PMIC: already configured for RSB
  54. NOTICE: PMIC: setup successful
  55.  
  56.  
  57. U-Boot 2016.05-00558-ga090bfa (Jun 01 2016 - 01:16:54 +0100) Allwinner Technology
  58.  
  59. CPU: Allwinner A64 (SUN50I)
  60. Model: Pine64+
  61. DRAM: 2 GiB
  62. MMC: SUNXI SD/MMC: 0
  63. *** Warning - bad CRC, using default environment
  64.  
  65. In: serial
  66. Out: serial
  67. Err: serial
  68. Net: No ethernet found.
  69. starting USB...
  70. No controllers found
  71. Hit any key to stop autoboot: 2  1  0
  72. switch to partitions #0, OK
  73. mmc0 is current device
  74. Scanning mmc 0:1...
  75. Found U-Boot script /boot.scr.uimg
  76. reading /boot.scr.uimg
  77. 282 bytes read in 17 ms (15.6 KiB/s)
  78. ## Executing script at 4fc00000
  79. reading Image
  80. 14932480 bytes read in 983 ms (14.5 MiB/s)
  81. reading sun50i-a64-pine64-plus.dtb
  82. 11661 bytes read in 29 ms (392.6 KiB/s)
  83. ## Flattened Device Tree blob at 4fa00000
  84. Booting using the fdt blob at 0x4fa00000
  85. Loading Device Tree to 0000000049ffa000, end 0000000049fffd8c ... OK
  86.  
  87. Starting kernel ...
  88.  
  89. [ 0.000000] Booting Linux on physical CPU 0x0
  90. [ 0.000000] Linux version 4.9.0-00036-ge6af24d-dirty (rjones@moo.home.annexia.org) (gcc version 6.1.1 20160621 (Red Hat Cross 6.1.1-2) (GCC) ) #12 SMP PREEMPT Sat Mar 18 11:54:46 GMT 2017
  91. [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
  92. [ 0.000000] earlycon: uart0 at MMIO32 0x0000000001c28000 (options '')
  93. [ 0.000000] bootconsole [uart0] enabled
  94. [ 0.000000] efi: Getting EFI parameters from FDT:
  95. [ 0.000000] efi: UEFI not found.
  96. [ 0.000000] cma: Reserved 16 MiB at 0x00000000bf000000
  97. [ 0.000000] psci: probing for conduit method from DT.
  98. [ 0.000000] psci: PSCIv0.2 detected in firmware.
  99. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  100. [ 0.000000] psci: Trusted OS migration not required
  101. [ 0.000000] percpu: Embedded 21 pages/cpu @ffff80007ef8e000 s47896 r8192 d29928 u86016
  102. [ 0.000000] Detected VIPT I-cache on CPU0
  103. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  104. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516096
  105. [ 0.000000] Kernel command line: console=ttyS0,115200n8 ro root=/dev/mmcblk0p5 rootwait earlycon=uart,mmio32,0x01c28000
  106. [ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
  107. [ 0.000000] log_buf_len total cpu_extra contributions: 12288 bytes
  108. [ 0.000000] log_buf_len min size: 16384 bytes
  109. [ 0.000000] log_buf_len: 32768 bytes
  110. [ 0.000000] early log buf free: 14640(89%)
  111. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  112. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  113. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  114. [ 0.000000] Memory: 2029516K/2097152K available (8892K kernel code, 886K rwdata, 3728K rodata, 1024K init, 280K bss, 51252K reserved, 16384K cma-reserved)
  115. [ 0.000000] Virtual kernel memory layout:
  116. [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
  117. [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
  118. [ 0.000000] .text : 0xffff000008080000 - 0xffff000008930000 ( 8896 KB)
  119. [ 0.000000] .rodata : 0xffff000008930000 - 0xffff000008ce0000 ( 3776 KB)
  120. [ 0.000000] .init : 0xffff000008ce0000 - 0xffff000008de0000 ( 1024 KB)
  121. [ 0.000000] .data : 0xffff000008de0000 - 0xffff000008ebda00 ( 887 KB)
  122. [ 0.000000] .bss : 0xffff000008ebda00 - 0xffff000008f03dbc ( 281 KB)
  123. [ 0.000000] fixed : 0xffff7dfffe7fd000 - 0xffff7dfffec00000 ( 4108 KB)
  124. [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
  125. [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
  126. [ 0.000000] 0xffff7e0000000000 - 0xffff7e0002000000 ( 32 MB actual)
  127. [ 0.000000] memory : 0xffff800000000000 - 0xffff800080000000 ( 2048 MB)
  128. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  129. [ 0.000000] Preemptible hierarchical RCU implementation.
  130. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  131. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
  132. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
  133. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  134. [ 0.000000] GIC: Using split EOI/Deactivate mode
  135. [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
  136. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  137. [ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  138. [ 0.008855] Console: colour dummy device 80x25
  139. [ 0.013566] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  140. [ 0.024262] pid_max: default: 32768 minimum: 301
  141. [ 0.029290] Security Framework initialized
  142. [ 0.033660] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  143. [ 0.040626] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  144. [ 0.049588] ASID allocator initialised with 65536 entries
  145. [ 0.088219] EFI services will not be available.
  146. [ 0.134476] Detected VIPT I-cache on CPU1
  147. [ 0.134559] CPU1: Booted secondary processor [410fd034]
  148. [ 0.165981] Detected VIPT I-cache on CPU2
  149. [ 0.166037] CPU2: Booted secondary processor [410fd034]
  150. [ 0.198084] Detected VIPT I-cache on CPU3
  151. [ 0.198138] CPU3: Booted secondary processor [410fd034]
  152. [ 0.198255] Brought up 4 CPUs
  153. [ 0.230393] SMP: Total of 4 processors activated.
  154. [ 0.235397] CPU features: detected feature: 32-bit EL0 Support
  155. [ 0.241547] CPU: All CPU(s) started at EL2
  156. [ 0.245909] alternatives: patching kernel code
  157. [ 0.252424] devtmpfs: initialized
  158. [ 0.261938] DMI not present or invalid.
  159. [ 0.266409] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  160. [ 0.277827] pinctrl core: initialized pinctrl subsystem
  161. [ 0.285390] NET: Registered protocol family 16
  162. [ 0.310239] cpuidle: using governor menu
  163. [ 0.314973] vdso: 2 pages (1 code @ ffff000008937000, 1 data @ ffff000008de4000)
  164. [ 0.322755] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  165. [ 0.331464] DMA: preallocated 256 KiB pool for atomic allocations
  166. [ 0.338520] Serial: AMBA PL011 UART driver
  167. [ 0.384115] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  168. [ 0.392484] ACPI: Interpreter disabled.
  169. [ 0.398223] vgaarb: loaded
  170. [ 0.401617] SCSI subsystem initialized
  171. [ 0.407144] usbcore: registered new interface driver usbfs
  172. [ 0.413110] usbcore: registered new interface driver hub
  173. [ 0.418965] usbcore: registered new device driver usb
  174. [ 0.425382] pps_core: LinuxPPS API ver. 1 registered
  175. [ 0.430574] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  176. [ 0.440319] PTP clock support registered
  177. [ 0.445088] dmi: Firmware registration failed.
  178. [ 0.450202] Advanced Linux Sound Architecture Driver Initialized.
  179. [ 0.458273] clocksource: Switched to clocksource arch_sys_counter
  180. [ 0.464970] VFS: Disk quotas dquot_6.6.0
  181. [ 0.469189] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  182. [ 0.477001] pnp: PnP ACPI: disabled
  183. [ 0.501385] NET: Registered protocol family 2
  184. [ 0.507032] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  185. [ 0.514904] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  186. [ 0.522517] TCP: Hash tables configured (established 16384 bind 16384)
  187. [ 0.529479] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  188. [ 0.535832] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  189. [ 0.542912] NET: Registered protocol family 1
  190. [ 0.548207] RPC: Registered named UNIX socket transport module.
  191. [ 0.554481] RPC: Registered udp transport module.
  192. [ 0.559469] RPC: Registered tcp transport module.
  193. [ 0.564373] RPC: Registered tcp NFSv4.1 backchannel transport module.
  194. [ 0.572103] kvm [1]: 8-bit VMID
  195. [ 0.575459] kvm [1]: IDMAP page: 4091e000
  196. [ 0.579705] kvm [1]: HYP VA range: 800000000000:ffffffffffff
  197. [ 0.586910] kvm [1]: Hyp mode initialized successfully
  198. [ 0.592323] kvm [1]: vgic-v2@1c84000
  199. [ 0.596320] kvm [1]: vgic interrupt IRQ1
  200. [ 0.600465] kvm [1]: virtual timer IRQ4
  201. [ 0.608311] futex hash table entries: 1024 (order: 5, 131072 bytes)
  202. [ 0.615029] audit: initializing netlink subsys (disabled)
  203. [ 0.620743] audit: type=2000 audit(0.548:1): initialized
  204. [ 0.627044] workingset: timestamp_bits=46 max_order=19 bucket_order=0
  205. [ 0.654760] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  206. [ 0.662530] NFS: Registering the id_resolver key type
  207. [ 0.667896] Key type id_resolver registered
  208. [ 0.672348] Key type id_legacy registered
  209. [ 0.676608] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  210. [ 0.684025] SGI XFS with ACLs, security attributes, no debug enabled
  211. [ 0.694062] 9p: Installing v9fs 9p2000 file system support
  212. [ 0.704998] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  213. [ 0.712865] io scheduler noop registered
  214. [ 0.717027] io scheduler cfq registered (default)
  215. [ 0.724203] libphy: mdio_driver_register: phy-bcm-ns2-pci
  216. [ 0.744674] xenfs: not registering filesystem on non-xen platform
  217. [ 0.761900] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  218. [ 0.771481] dw-apb-uart 1c28000.serial: could not find pctldev for node /soc/pinctrl@1c20800/uart0@0, deferring probe
  219. [ 0.783568] SuperH (H)SCI(F) driver initialized
  220. [ 0.789080] msm_serial: driver initialized
  221. [ 0.794397] Unable to detect cache hierarchy from DT for CPU 0
  222. [ 0.812067] loop: module loaded
  223. [ 0.817111] hisi_sas: driver version v1.6
  224. [ 0.826317] libphy: Fixed MDIO Bus: probed
  225. [ 0.832214] tun: Universal TUN/TAP device driver, 1.6
  226. [ 0.837585] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  227. [ 0.846049] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  228. [ 0.852281] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  229. [ 0.858735] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
  230. [ 0.865981] igb: Copyright (c) 2007-2014 Intel Corporation.
  231. [ 0.872000] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
  232. [ 0.880198] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  233. [ 0.886688] sky2: driver version 1.30
  234. [ 0.891793] VFIO - User Level meta-driver version: 0.3
  235. [ 0.899976] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  236. [ 0.906903] ehci-pci: EHCI PCI platform driver
  237. [ 0.911734] ehci-platform: EHCI generic platform driver
  238. [ 0.917429] ehci-exynos: EHCI EXYNOS driver
  239. [ 0.922051] ehci-msm: Qualcomm On-Chip EHCI Host Controller
  240. [ 0.928050] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  241. [ 0.934540] ohci-pci: OHCI PCI platform driver
  242. [ 0.939352] ohci-platform: OHCI generic platform driver
  243. [ 0.945051] ohci-exynos: OHCI EXYNOS driver
  244. [ 0.950390] usbcore: registered new interface driver usb-storage
  245. [ 0.958893] mousedev: PS/2 mouse device common for all mice
  246. [ 0.967354] sun6i-rtc 1f00000.rtc: rtc core: registered rtc-sun6i as rtc0
  247. [ 0.974486] sun6i-rtc 1f00000.rtc: RTC enabled
  248. [ 0.979794] i2c /dev entries driver
  249. [ 0.984263] mv64xxx_i2c 1c2b000.i2c: could not find pctldev for node /soc/pinctrl@1c20800/i2c1_pins, deferring probe
  250. [ 0.999481] sdhci: Secure Digital Host Controller Interface driver
  251. [ 1.006084] sdhci: Copyright(c) Pierre Ossman
  252. [ 1.011213] Synopsys Designware Multimedia Card Interface Driver
  253. [ 1.018316] sunxi-mmc 1c0f000.mmc: could not find pctldev for node /soc/pinctrl@1c20800/mmc0@0, deferring probe
  254. [ 1.029033] sdhci-pltfm: SDHCI platform and OF driver helper
  255. [ 1.036209] ledtrig-cpu: registered to indicate activity on CPUs
  256. [ 1.045018] usbcore: registered new interface driver usbhid
  257. [ 1.050937] usbhid: USB HID core driver
  258. [ 1.058193] NET: Registered protocol family 17
  259. [ 1.063025] 9pnet: Installing 9P2000 support
  260. [ 1.067697] Key type dns_resolver registered
  261. [ 1.073691] registered taskstats version 1
  262. [ 1.083356] dw-apb-uart 1c28000.serial: could not find pctldev for node /soc/pinctrl@1c20800/uart0@0, deferring probe
  263. [ 1.095569] mv64xxx_i2c 1c2b000.i2c: could not find pctldev for node /soc/pinctrl@1c20800/i2c1_pins, deferring probe
  264. [ 1.107536] sunxi-mmc 1c0f000.mmc: could not find pctldev for node /soc/pinctrl@1c20800/mmc0@0, deferring probe
  265. [ 1.118482] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01 00:00:04 UTC (4)
  266. [ 1.126947] vcc3v3: disabling
  267. [ 1.130063] ALSA device list:
  268. [ 1.133261] No soundcards found.
  269. [ 1.136926] Warning: unable to open an initial console.
  270. [ 1.142511] Waiting for root device /dev/mmcblk0p5...
  271. \00HELLO! BOOT0 is starting!
  272. boot0 commit : 045061a8bb2580cb3fa02e301f52a015040c158f
  273.  
  274. boot0 version : 4.0.0
  275. set pll start
  276. set pll end
  277. rtc[0] value = 0x00000000
  278. rtc[1] value = 0x00000000
  279. rtc[2] value = 0x00000000
  280. rtc[3] value = 0x00000000
  281. rtc[4] value = 0x00000000
  282. rtc[5] value = 0x00000000
  283. DRAM driver version: V1.1
  284. rsb_send_initseq: rsb clk 400Khz -> 3Mhz
  285. PMU: AXP81X
  286. ddr voltage = 1500 mv
  287. DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  288. DRAM clk = 672 MHz
  289. DRAM zq value: 003b3bbb
  290. DRAM single rank full DQ OK
  291. DRAM size = 2048 MB
  292. DRAM init ok
  293. dram size =2048
  294. card boot number = 0, boot0 copy = 0
  295. card no is 0
  296. sdcard 0 line count 4
  297. [mmc]: mmc driver ver 2015-05-08 20:06
  298. [mmc]: sdc0 spd mode error, 2
  299. [mmc]: Wrong media type 0x00000000
  300. [mmc]: ***Try SD card 0***
  301. [mmc]: HSSDR52/SDR25 4 bit
  302. [mmc]: 50000000 Hz
  303. [mmc]: 15193 MB
  304. [mmc]: ***SD/MMC 0 init OK!!!***
  305. sdcard 0 init ok
  306. The size of uboot is 00064000.
  307. sum=0540847d
  308. src_sum=0540847d
  309. Succeed in loading uboot from sdmmc flash.
  310. boot0: start load other image
  311. boot0: Loading BL3-1
  312. Loading file 0 at address 0x40000000,size 0x00000200 success
  313. boot0: Loading scp
  314. Loading file 2 at address 0x00040000,size 0x0000b200 success
  315. set arisc reset to de-assert state
  316. Ready to disable icache.
  317. Jump to secend Boot.
  318. NOTICE: BL3-1: Running in SRAM A2 (@0x44000)
  319. NOTICE: Configuring SPC Controller
  320. NOTICE: BL3-1: v1.0(debug):467f187
  321. NOTICE: BL3-1: Built : 01:23:55, Jun 1 2016
  322. NOTICE: Configuring AXP PMIC
  323. NOTICE: PMIC: already configured for RSB
  324. NOTICE: PMIC: setup successful
  325.  
  326.  
  327. U-Boot 2016.05-00558-ga090bfa (Jun 01 2016 - 01:16:54 +0100) Allwinner Technology
  328.  
  329. CPU: Allwinner A64 (SUN50I)
  330. Model: Pine64+
  331. DRAM: 2 GiB
  332. MMC: SUNXI SD/MMC: 0
  333. *** Warning - bad CRC, using default environment
  334.  
  335. In: serial
  336. Out: serial
  337. Err: serial
  338. Net: No ethernet found.
  339. starting USB...
  340. No controllers found
  341. Hit any key to stop autoboot: 2  1  0
  342. switch to partitions #0, OK
  343. mmc0 is current device
  344. Scanning mmc 0:1...
  345. Found U-Boot script /boot.scr.uimg
  346. reading /boot.scr.uimg
  347. 282 bytes read in 17 ms (15.6 KiB/s)
  348. ## Executing script at 4fc00000
  349. reading Image
  350. 14932480 bytes read in 983 ms (14.5 MiB/s)
  351. reading sun50i-a64-pine64-plus.dtb
  352. 11661 bytes read in 29 ms (392.6 KiB/s)
  353. ## Flattened Device Tree blob at 4fa00000
  354. Booting using the fdt blob at 0x4fa00000
  355. Loading Device Tree to 0000000049ffa000, end 0000000049fffd8c ... OK
  356.  
  357. Starting kernel ...
  358.  
  359. [ 0.000000] Booting Linux on physical CPU 0x0
  360. [ 0.000000] Linux version 4.9.0-00036-ge6af24d-dirty (rjones@moo.home.annexia.org) (gcc version 6.1.1 20160621 (Red Hat Cross 6.1.1-2) (GCC) ) #12 SMP PREEMPT Sat Mar 18 11:54:46 GMT 2017
  361. [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
  362. [ 0.000000] earlycon: uart0 at MMIO32 0x0000000001c28000 (options '')
  363. [ 0.000000] bootconsole [uart0] enabled
  364. [ 0.000000] efi: Getting EFI parameters from FDT:
  365. [ 0.000000] efi: UEFI not found.
  366. [ 0.000000] cma: Reserved 16 MiB at 0x00000000bf000000
  367. [ 0.000000] psci: probing for conduit method from DT.
  368. [ 0.000000] psci: PSCIv0.2 detected in firmware.
  369. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  370. [ 0.000000] psci: Trusted OS migration not required
  371. [ 0.000000] percpu: Embedded 21 pages/cpu @ffff80007ef8e000 s47896 r8192 d29928 u86016
  372. [ 0.000000] Detected VIPT I-cache on CPU0
  373. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  374. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516096
  375. [ 0.000000] Kernel command line: console=ttyS0,115200n8 ro root=/dev/mmcblk0p5 rootwait earlycon=uart,mmio32,0x01c28000
  376. [ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
  377. [ 0.000000] log_buf_len total cpu_extra contributions: 12288 bytes
  378. [ 0.000000] log_buf_len min size: 16384 bytes
  379. [ 0.000000] log_buf_len: 32768 bytes
  380. [ 0.000000] early log buf free: 14640(89%)
  381. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  382. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  383. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  384. [ 0.000000] Memory: 2029516K/2097152K available (8892K kernel code, 886K rwdata, 3728K rodata, 1024K init, 280K bss, 51252K reserved, 16384K cma-reserved)
  385. [ 0.000000] Virtual kernel memory layout:
  386. [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
  387. [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
  388. [ 0.000000] .text : 0xffff000008080000 - 0xffff000008930000 ( 8896 KB)
  389. [ 0.000000] .rodata : 0xffff000008930000 - 0xffff000008ce0000 ( 3776 KB)
  390. [ 0.000000] .init : 0xffff000008ce0000 - 0xffff000008de0000 ( 1024 KB)
  391. [ 0.000000] .data : 0xffff000008de0000 - 0xffff000008ebda00 ( 887 KB)
  392. [ 0.000000] .bss : 0xffff000008ebda00 - 0xffff000008f03dbc ( 281 KB)
  393. [ 0.000000] fixed : 0xffff7dfffe7fd000 - 0xffff7dfffec00000 ( 4108 KB)
  394. [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
  395. [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
  396. [ 0.000000] 0xffff7e0000000000 - 0xffff7e0002000000 ( 32 MB actual)
  397. [ 0.000000] memory : 0xffff800000000000 - 0xffff800080000000 ( 2048 MB)
  398. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  399. [ 0.000000] Preemptible hierarchical RCU implementation.
  400. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  401. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
  402. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
  403. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  404. [ 0.000000] GIC: Using split EOI/Deactivate mode
  405. [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
  406. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  407. [ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  408. [ 0.008896] Console: colour dummy device 80x25
  409. [ 0.013642] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  410. [ 0.024467] pid_max: default: 32768 minimum: 301
  411. [ 0.029417] Security Framework initialized
  412. [ 0.033779] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  413. [ 0.040902] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  414. [ 0.050008] ASID allocator initialised with 65536 entries
  415. [ 0.088615] EFI services will not be available.
  416. [ 0.134786] Detected VIPT I-cache on CPU1
  417. [ 0.134869] CPU1: Booted secondary processor [410fd034]
  418. [ 0.166310] Detected VIPT I-cache on CPU2
  419. [ 0.166365] CPU2: Booted secondary processor [410fd034]
  420. [ 0.198400] Detected VIPT I-cache on CPU3
  421. [ 0.198453] CPU3: Booted secondary processor [410fd034]
  422. [ 0.198570] Brought up 4 CPUs
  423. [ 0.230852] SMP: Total of 4 processors activated.
  424. [ 0.235839] CPU features: detected feature: 32-bit EL0 Support
  425. [ 0.241973] CPU: All CPU(s) started at EL2
  426. [ 0.246348] alternatives: patching kernel code
  427. [ 0.252781] devtmpfs: initialized
  428. [ 0.262275] DMI not present or invalid.
  429. [ 0.266703] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  430. [ 0.277955] pinctrl core: initialized pinctrl subsystem
  431. [ 0.285626] NET: Registered protocol family 16
  432. [ 0.306402] cpuidle: using governor menu
  433. [ 0.311180] vdso: 2 pages (1 code @ ffff000008937000, 1 data @ ffff000008de4000)
  434. [ 0.318931] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  435. [ 0.327622] DMA: preallocated 256 KiB pool for atomic allocations
  436. [ 0.334650] Serial: AMBA PL011 UART driver
  437. [ 0.380435] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  438. [ 0.388890] ACPI: Interpreter disabled.
  439. [ 0.394451] vgaarb: loaded
  440. [ 0.397795] SCSI subsystem initialized
  441. [ 0.402639] usbcore: registered new interface driver usbfs
  442. [ 0.408571] usbcore: registered new interface driver hub
  443. [ 0.414324] usbcore: registered new device driver usb
  444. [ 0.420163] pps_core: LinuxPPS API ver. 1 registered
  445. [ 0.425458] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  446. [ 0.435033] PTP clock support registered
  447. [ 0.439501] dmi: Firmware registration failed.
  448. [ 0.444393] Advanced Linux Sound Architecture Driver Initialized.
  449. [ 0.452176] clocksource: Switched to clocksource arch_sys_counter
  450. [ 0.458819] VFS: Disk quotas dquot_6.6.0
  451. [ 0.463099] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  452. [ 0.470826] pnp: PnP ACPI: disabled
  453. [ 0.488436] NET: Registered protocol family 2
  454. [ 0.494031] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  455. [ 0.501870] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  456. [ 0.509444] TCP: Hash tables configured (established 16384 bind 16384)
  457. [ 0.516545] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  458. [ 0.522955] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  459. [ 0.530141] NET: Registered protocol family 1
  460. [ 0.535342] RPC: Registered named UNIX socket transport module.
  461. [ 0.541528] RPC: Registered udp transport module.
  462. [ 0.546425] RPC: Registered tcp transport module.
  463. [ 0.551440] RPC: Registered tcp NFSv4.1 backchannel transport module.
  464. [ 0.559122] kvm [1]: 8-bit VMID
  465. [ 0.562489] kvm [1]: IDMAP page: 4091e000
  466. [ 0.566743] kvm [1]: HYP VA range: 800000000000:ffffffffffff
  467. [ 0.574065] kvm [1]: Hyp mode initialized successfully
  468. [ 0.579467] kvm [1]: vgic-v2@1c84000
  469. [ 0.583411] kvm [1]: vgic interrupt IRQ1
  470. [ 0.587530] kvm [1]: virtual timer IRQ4
  471. [ 0.595347] futex hash table entries: 1024 (order: 5, 131072 bytes)
  472. [ 0.602150] audit: initializing netlink subsys (disabled)
  473. [ 0.607852] audit: type=2000 audit(0.536:1): initialized
  474. [ 0.614175] workingset: timestamp_bits=46 max_order=19 bucket_order=0
  475. [ 0.641823] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  476. [ 0.649612] NFS: Registering the id_resolver key type
  477. [ 0.655035] Key type id_resolver registered
  478. [ 0.659410] Key type id_legacy registered
  479. [ 0.663618] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  480. [ 0.671072] SGI XFS with ACLs, security attributes, no debug enabled
  481. [ 0.681092] 9p: Installing v9fs 9p2000 file system support
  482. [ 0.691958] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  483. [ 0.699703] io scheduler noop registered
  484. [ 0.703875] io scheduler cfq registered (default)
  485. [ 0.710242] libphy: mdio_driver_register: phy-bcm-ns2-pci
  486. [ 0.725587] xenfs: not registering filesystem on non-xen platform
  487. [ 0.739250] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  488. [ 0.748137] dw-apb-uart 1c28000.serial: could not find pctldev for node /soc/pinctrl@1c20800/uart0@0, deferring probe
  489. [ 0.759958] SuperH (H)SCI(F) driver initialized
  490. [ 0.765210] msm_serial: driver initialized
  491. [ 0.770280] Unable to detect cache hierarchy from DT for CPU 0
  492. [ 0.786740] loop: module loaded
  493. [ 0.790965] hisi_sas: driver version v1.6
  494. [ 0.799375] libphy: Fixed MDIO Bus: probed
  495. [ 0.805284] tun: Universal TUN/TAP device driver, 1.6
  496. [ 0.810644] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  497. [ 0.819007] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  498. [ 0.825188] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  499. [ 0.831554] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
  500. [ 0.838897] igb: Copyright (c) 2007-2014 Intel Corporation.
  501. [ 0.844892] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
  502. [ 0.853074] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  503. [ 0.859485] sky2: driver version 1.30
  504. [ 0.864534] VFIO - User Level meta-driver version: 0.3
  505. [ 0.872797] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  506. [ 0.879695] ehci-pci: EHCI PCI platform driver
  507. [ 0.884570] ehci-platform: EHCI generic platform driver
  508. [ 0.890230] ehci-exynos: EHCI EXYNOS driver
  509. [ 0.894834] ehci-msm: Qualcomm On-Chip EHCI Host Controller
  510. [ 0.900922] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  511. [ 0.907539] ohci-pci: OHCI PCI platform driver
  512. [ 0.912365] ohci-platform: OHCI generic platform driver
  513. [ 0.918091] ohci-exynos: OHCI EXYNOS driver
  514. [ 0.923433] usbcore: registered new interface driver usb-storage
  515. [ 0.931961] mousedev: PS/2 mouse device common for all mice
  516. [ 0.940480] sun6i-rtc 1f00000.rtc: rtc core: registered rtc-sun6i as rtc0
  517. [ 0.947670] sun6i-rtc 1f00000.rtc: RTC enabled
  518. [ 0.952916] i2c /dev entries driver
  519. [ 0.957381] mv64xxx_i2c 1c2b000.i2c: could not find pctldev for node /soc/pinctrl@1c20800/i2c1_pins, deferring probe
  520. [ 0.972426] sdhci: Secure Digital Host Controller Interface driver
  521. [ 0.978990] sdhci: Copyright(c) Pierre Ossman
  522. [ 0.983929] Synopsys Designware Multimedia Card Interface Driver
  523. [ 0.990773] sunxi-mmc 1c0f000.mmc: could not find pctldev for node /soc/pinctrl@1c20800/mmc0@0, deferring probe
  524. [ 1.001607] sdhci-pltfm: SDHCI platform and OF driver helper
  525. [ 1.008827] ledtrig-cpu: registered to indicate activity on CPUs
  526. [ 1.016650] usbcore: registered new interface driver usbhid
  527. [ 1.022460] usbhid: USB HID core driver
  528. [ 1.028940] NET: Registered protocol family 17
  529. [ 1.033785] 9pnet: Installing 9P2000 support
  530. [ 1.038439] Key type dns_resolver registered
  531. [ 1.044138] registered taskstats version 1
  532. [ 1.053706] dw-apb-uart 1c28000.serial: could not find pctldev for node /soc/pinctrl@1c20800/uart0@0, deferring probe
  533. [ 1.065851] mv64xxx_i2c 1c2b000.i2c: could not find pctldev for node /soc/pinctrl@1c20800/i2c1_pins, deferring probe
  534. [ 1.077872] sunxi-mmc 1c0f000.mmc: could not find pctldev for node /soc/pinctrl@1c20800/mmc0@0, deferring probe
  535. [ 1.088776] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01 00:00:05 UTC (5)
  536. [ 1.097200] vcc3v3: disabling
  537. [ 1.100402] ALSA device list:
  538. [ 1.103498] No soundcards found.
  539. [ 1.107126] Warning: unable to open an initial console.
  540. [ 1.112797] Waiting for root device /dev/mmcblk0p5...
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!