API tools faq
paste
Advertisement
hectorcastelli

Disks configs

hectorcastelli
Jan 8th, 2014
115
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 6.65 KB | None | 0 0
raw download clone embed print report
  1.  
  2. /dev/sda:
  3.  
  4. ATA device, with non-removable media
  5. Model Number: TOSHIBA MQ01ABF050
  6. Serial Number: 936OT7O9T
  7. Firmware Revision: AM0P1D
  8. Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
  9. Standards:
  10. Supported: 8 7 6 5
  11. Likely used: 8
  12. Configuration:
  13. Logical max current
  14. cylinders 16383 16383
  15. heads 16 16
  16. sectors/track 63 63
  17. --
  18. CHS current addressable sectors: 16514064
  19. LBA user addressable sectors: 268435455
  20. LBA48 user addressable sectors: 976773168
  21. Logical Sector size: 512 bytes
  22. Physical Sector size: 4096 bytes
  23. Logical Sector-0 offset: 0 bytes
  24. device size with M = 1024*1024: 476940 MBytes
  25. device size with M = 1000*1000: 500107 MBytes (500 GB)
  26. cache/buffer size = 8192 KBytes
  27. Form Factor: 2.5 inch
  28. Nominal Media Rotation Rate: 5400
  29. Capabilities:
  30. LBA, IORDY(can be disabled)
  31. Queue depth: 32
  32. Standby timer values: spec'd by Standard, no device specific minimum
  33. R/W multiple sector transfer: Max = 16 Current = 16
  34. Advanced power management level: 254
  35. DMA: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
  36. Cycle time: min=120ns recommended=120ns
  37. PIO: pio0 pio1 pio2 pio3 pio4
  38. Cycle time: no flow control=120ns IORDY flow control=120ns
  39. Commands/features:
  40. Enabled Supported:
  41. * SMART feature set
  42. Security Mode feature set
  43. * Power Management feature set
  44. * Write cache
  45. * Look-ahead
  46. * Host Protected Area feature set
  47. * WRITE_BUFFER command
  48. * READ_BUFFER command
  49. * NOP cmd
  50. * DOWNLOAD_MICROCODE
  51. * Advanced Power Management feature set
  52. Power-Up In Standby feature set
  53. * SET_FEATURES required to spinup after power up
  54. SET_MAX security extension
  55. * 48-bit Address feature set
  56. * Device Configuration Overlay feature set
  57. * Mandatory FLUSH_CACHE
  58. * FLUSH_CACHE_EXT
  59. * SMART error logging
  60. * SMART self-test
  61. * General Purpose Logging feature set
  62. * WRITE_{DMA|MULTIPLE}_FUA_EXT
  63. * 64-bit World wide name
  64. * IDLE_IMMEDIATE with UNLOAD
  65. * WRITE_UNCORRECTABLE_EXT command
  66. * {READ,WRITE}_DMA_EXT_GPL commands
  67. * Segmented DOWNLOAD_MICROCODE
  68. * Gen1 signaling speed (1.5Gb/s)
  69. * Gen2 signaling speed (3.0Gb/s)
  70. * Gen3 signaling speed (6.0Gb/s)
  71. * Native Command Queueing (NCQ)
  72. * Host-initiated interface power management
  73. * Phy event counters
  74. * Idle-Unload when NCQ is active
  75. * Host automatic Partial to Slumber transitions
  76. * Device automatic Partial to Slumber transitions
  77. * READ_LOG_DMA_EXT equivalent to READ_LOG_EXT
  78. * DMA Setup Auto-Activate optimization
  79. Device-initiated interface power management
  80. * Software settings preservation
  81. * SMART Command Transport (SCT) feature set
  82. * SCT Write Same (AC2)
  83. * SCT Error Recovery Control (AC3)
  84. * SCT Features Control (AC4)
  85. * SCT Data Tables (AC5)
  86. Security:
  87. Master password revision code = 65534
  88. supported
  89. not enabled
  90. not locked
  91. not frozen
  92. not expired: security count
  93. supported: enhanced erase
  94. 108min for SECURITY ERASE UNIT. 108min for ENHANCED SECURITY ERASE UNIT.
  95. Logical Unit WWN Device Identifier: 5000039501b81c71
  96. NAA : 5
  97. IEEE OUI : 000039
  98. Unique ID : 501b81c71
  99. Checksum: correct
  100.  
  101. ##########################################################################################
  102. ##########################################################################################
  103. ##########################################################################################
  104.  
  105. /dev/sdb:
  106.  
  107. ATA device, with non-removable media
  108. Model Number: SMART SSD XceedValue2 mSATA 32GB
  109. Serial Number: SBR2013092848523
  110. Firmware Revision: CXM13D1Q
  111. Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
  112. Standards:
  113. Used: unknown (minor revision code 0x0039)
  114. Supported: 8 7 6 5
  115. Likely used: 8
  116. Configuration:
  117. Logical max current
  118. cylinders 16383 16383
  119. heads 16 16
  120. sectors/track 63 63
  121. --
  122. CHS current addressable sectors: 16514064
  123. LBA user addressable sectors: 62533296
  124. LBA48 user addressable sectors: 62533296
  125. Logical Sector size: 512 bytes
  126. Physical Sector size: 512 bytes
  127. device size with M = 1024*1024: 30533 MBytes
  128. device size with M = 1000*1000: 32017 MBytes (32 GB)
  129. cache/buffer size = unknown
  130. Nominal Media Rotation Rate: Solid State Device
  131. Capabilities:
  132. LBA, IORDY(can be disabled)
  133. Queue depth: 32
  134. Standby timer values: spec'd by Standard, no device specific minimum
  135. R/W multiple sector transfer: Max = 16 Current = 16
  136. Recommended acoustic management value: 128, current value: 0
  137. DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
  138. Cycle time: min=120ns recommended=120ns
  139. PIO: pio0 pio1 pio2 pio3 pio4
  140. Cycle time: no flow control=120ns IORDY flow control=120ns
  141. Commands/features:
  142. Enabled Supported:
  143. * SMART feature set
  144. Security Mode feature set
  145. * Power Management feature set
  146. * Write cache
  147. * Look-ahead
  148. * Host Protected Area feature set
  149. * WRITE_BUFFER command
  150. * READ_BUFFER command
  151. * NOP cmd
  152. * DOWNLOAD_MICROCODE
  153. SET_MAX security extension
  154. Automatic Acoustic Management feature set
  155. * 48-bit Address feature set
  156. * Device Configuration Overlay feature set
  157. * Mandatory FLUSH_CACHE
  158. * FLUSH_CACHE_EXT
  159. * SMART error logging
  160. * SMART self-test
  161. * General Purpose Logging feature set
  162. * WRITE_{DMA|MULTIPLE}_FUA_EXT
  163. * 64-bit World wide name
  164. * WRITE_UNCORRECTABLE_EXT command
  165. * {READ,WRITE}_DMA_EXT_GPL commands
  166. * Segmented DOWNLOAD_MICROCODE
  167. * Gen1 signaling speed (1.5Gb/s)
  168. * Gen2 signaling speed (3.0Gb/s)
  169. * Gen3 signaling speed (6.0Gb/s)
  170. * Native Command Queueing (NCQ)
  171. * Host-initiated interface power management
  172. * Phy event counters
  173. * DMA Setup Auto-Activate optimization
  174. Device-initiated interface power management
  175. * Software settings preservation
  176. * SET MAX SETPASSWORD/UNLOCK DMA commands
  177. * WRITE BUFFER DMA command
  178. * READ BUFFER DMA command
  179. * Data Set Management TRIM supported (limit 8 blocks)
  180. Security:
  181. Master password revision code = 65534
  182. supported
  183. not enabled
  184. not locked
  185. not frozen
  186. not expired: security count
  187. supported: enhanced erase
  188. 6min for SECURITY ERASE UNIT. 32min for ENHANCED SECURITY ERASE UNIT.
  189. Logical Unit WWN Device Identifier: 5002538043584d30
  190. NAA : 5
  191. IEEE OUI : 002538
  192. Unique ID : 043584d30
  193. Checksum: correct
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!