SHARE
TWEET

Untitled

faenil Jan 13th, 2015 7 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [root@localhost nemo]# dmesg
  2. [    0.000000] Booting Linux on physical CPU 0
  3. [    0.000000] Initializing cgroup subsys cpu
  4. [    0.000000] Linux version 3.5.3 (@faenil-Aspire-5820TG) (gcc version 4.6.4 20130412 (Mer 4.6.4-1) (Linaro GCC 4.6-2013.05) ) #13 PREEMPT Mon Jan 12 13:18:10 EST 2015
  5. [    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
  6. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  7. [    0.000000] Machine: Nokia RM-680 board
  8. [    0.000000] Truncating RAM at a0000000-bfffffff to -bf7fffff (vmalloc region overlap).
  9. [    0.000000] Reserving 6291456 bytes SDRAM for VRAM
  10. [    0.000000] Memory policy: ECC disabled, Data cache writeback
  11. [    0.000000] On node 0 totalpages: 256768
  12. [    0.000000] free_area_init_node: node 0, pgdat b0719698, node_mem_map b0c4b000
  13. [    0.000000]   Normal zone: 2032 pages used for memmap
  14. [    0.000000]   Normal zone: 0 pages reserved
  15. [    0.000000]   Normal zone: 254736 pages, LIFO batch:31
  16. [    0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
  17. [    0.000000] Clocking rate (Crystal/Core/MPU): 38.4/390/600 MHz
  18. [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  19. [    0.000000] pcpu-alloc: [0] 0
  20. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 254736
  21. [    0.000000] Kernel command line: init=/sbin/init vram=6m omapfb.vram=0:6M root=/dev/mmcblk0p4 rootwait rootflags=errors=remount-ro rootfstype=ext4 rw mtdoops.mtddev=log mtdoops.record_size=65536 console=tty0 mtdparts=omap2-onenand:1024k(bootloader),2816k@1024k(config),16384k@3840k(kernel),2048k@20224k(log),469248k@22272k(var),32768k@491520k(moslo) bootreason=pwr_key bootmode=normal nolo=2.3.6 product_name=RM-680 imei=357881040019699 g_nokia.iSerialNumber=357881040019699 serialnumber=ZUA030577 omap_sec.kci=916 battery-type=BL-4D gpio=cmt_apeslpx:93:sysfs:output,cmt_en:23:sysfs:init_active:output,cmt_rst_rq:88:sysfs:init_active:output,keypad_slide:109:key:inverted,sleep_ind:92:sysfs:output omapdss.def_disp_enabled=1 vhash=285e93eebfdded180a3ffdf0a42c0d09b0d8ce8a product_model=N950 hwid=1124
  22. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  23. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  24. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  25. [    0.000000] allocated 2080768 bytes of page_cgroup
  26. [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  27. [    0.000000] Memory: 1003MB = 1003MB total
  28. [    0.000000] Memory: 1003456k/1003456k available, 36928k reserved, 0K highmem
  29. [    0.000000] Virtual kernel memory layout:
  30.     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  31.     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  32.     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
  33.     lowmem  : 0xb0000000 - 0xef800000   (1016 MB)
  34.     modules : 0xaf000000 - 0xb0000000   (  16 MB)
  35.       .text : 0xb0008000 - 0xb0681c5c   (6632 kB)
  36.       .init : 0xb0682000 - 0xb06b303c   ( 197 kB)
  37.       .data : 0xb06b4000 - 0xb071a0c0   ( 409 kB)
  38.        .bss : 0xb071a0e4 - 0xb0c4a2a8   (5313 kB)
  39. [    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  40. [    0.000000] NR_IRQS:474
  41. [    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
  42. [    0.000000] Total of 96 interrupts on 1 active controller
  43. [    0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
  44. [    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  45. [    0.000000] OMAP clocksource: 32k_counter at 32768 Hz
  46. [    0.000000] Console: colour dummy device 80x30
  47. [    0.000000] console [tty0] enabled
  48. [    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
  49. [    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
  50. [    0.000000] ... MAX_LOCK_DEPTH:          48
  51. [    0.000000] ... MAX_LOCKDEP_KEYS:        8191
  52. [    0.000000] ... CLASSHASH_SIZE:          4096
  53. [    0.000000] ... MAX_LOCKDEP_ENTRIES:     16384
  54. [    0.000000] ... MAX_LOCKDEP_CHAINS:      32768
  55. [    0.000000] ... CHAINHASH_SIZE:          16384
  56. [    0.000000]  memory used by lock dependency info: 3695 kB
  57. [    0.000000]  per task-struct memory footprint: 1152 bytes
  58. [    0.004547] Calibrating delay loop... 597.64 BogoMIPS (lpj=2334720)
  59. [    0.085937] pid_max: default: 32768 minimum: 301
  60. [    0.086364] Security Framework initialized
  61. [    0.086547] Mount-cache hash table entries: 512
  62. [    0.090911] Initializing cgroup subsys cpuacct
  63. [    0.090972] Initializing cgroup subsys memory
  64. [    0.091247] Initializing cgroup subsys devices
  65. [    0.091278] Initializing cgroup subsys freezer
  66. [    0.091308] Initializing cgroup subsys net_cls
  67. [    0.091369] Initializing cgroup subsys blkio
  68. [    0.091400] Initializing cgroup subsys perf_event
  69. [    0.091461] Initializing cgroup subsys net_prio
  70. [    0.091766] CPU: Testing write buffer coherency: ok
  71. [    0.092681] Setting up static identity map for 0x804b4380 - 0x804b43d8
  72. [    0.096343] devtmpfs: initialized
  73. [    0.109771] dummy:
  74. [    0.111450] NET: Registered protocol family 16
  75. [    0.112670] GPMC revision 5.0
  76. [    0.112915] gpmc: irq-20 could not claim: err -22
  77. [    0.117584] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
  78. [    0.118103] OMAP GPIO hardware version 2.5
  79. [    0.118682] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
  80. [    0.119689] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
  81. [    0.120635] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
  82. [    0.121551] gpiochip_add: registered GPIOs 128 to 159 on device: gpio
  83. [    0.122467] gpiochip_add: registered GPIOs 160 to 191 on device: gpio
  84. [    0.125030] RM-680/696 board, rev 1124
  85. [    0.125091] omap_mux_init: Add partition: #1: core, flags: 0
  86. [    0.128662] Reprogramming SDRC clock to 390400000 Hz
  87. [    0.129455] wl1271 SPI
  88. [    0.134460] hw-breakpoint: debug architecture 0x4 unsupported.
  89. [    0.140777]  omap-mcbsp.2: alias fck already exists
  90. [    0.141174]  omap-mcbsp.3: alias fck already exists
  91. [    0.143554] Reserving DMA channels 0 and 1 for HS ROM code
  92. [    0.143615] OMAP DMA hardware revision 5.0
  93. [    0.158416] bio: create slab <bio-0> at 0
  94. [    0.160491] vbat: 3700 mV
  95. [    0.161193] rm680_vemmc: 2900 mV normal standby
  96. [    0.162628] SCSI subsystem initialized
  97. [    0.163238] usbcore: registered new interface driver usbfs
  98. [    0.163421] usbcore: registered new interface driver hub
  99. [    0.163787] usbcore: registered new device driver usb
  100. [    0.164733] i2c_omap i2c_omap.1: bus 1 rev1.4.0 at 2900 kHz
  101. [    0.172912] twl 1-0048: PIH (irq 7) chaining IRQs 320..328
  102. [    0.173553] twl 1-0048: power (irq 325) chaining IRQs 328..335
  103. [    0.175781] twl4030_gpio twl4030_gpio: gpio (irq 320) chaining IRQs 336..353
  104. [    0.176940] gpiochip_add: registered GPIOs 192 to 209 on device: twl4030
  105. [    0.180053] VUSB1V5: 1500 mV normal standby
  106. [    0.181304] VUSB1V8: 1800 mV normal standby
  107. [    0.182434] VUSB3V1: 3100 mV normal standby
  108. [    0.186584] twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
  109. [    0.187255] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
  110. [    0.190002] rm696_vio: 1800 mV normal standby
  111. [    0.191345] vdd_mpu_iva: 600 <--> 1450 mV normal
  112. [    0.192626] vdd_core: 600 <--> 1450 mV normal
  113. [    0.193725] VDAC: 1800 mV normal standby
  114. [    0.194976] rm696_vaux2: 1800 mV normal standby
  115. [    0.196289] VPLL2: 1800 mV normal standby
  116. [    0.197662] rm696_vmmc2: 3000 mV normal standby
  117. [    0.199096] rm696_vsim: 1800 mV normal standby
  118. [    0.200347] rm680_vaux1: 2800 mV normal standby
  119. [    0.201629] rm696_vaux3: 2800 mV normal standby
  120. [    0.202911] rm696_vaux4: 2800 mV normal standby
  121. [    0.204254] i2c_omap i2c_omap.2: bus 2 rev1.4.0 at 400 kHz
  122. [    0.206329] i2c_omap i2c_omap.3: bus 3 rev1.4.0 at 400 kHz
  123. [    0.208160] Linux media interface: v0.10
  124. [    0.208343] Linux video capture interface: v2.00
  125. [    0.209320] omap-iommu omap-iommu.0: isp registered
  126. [    0.209899] Advanced Linux Sound Architecture Driver Version 1.0.25.
  127. [    0.212585] Bluetooth: Core ver 2.16
  128. [    0.212738] NET: Registered protocol family 31
  129. [    0.212799] Bluetooth: HCI device and connection manager initialized
  130. [    0.212921] Bluetooth: HCI socket layer initialized
  131. [    0.212951] Bluetooth: L2CAP socket layer initialized
  132. [    0.213134] Bluetooth: SCO socket layer initialized
  133. [    0.213165] nfc: nfc_init: NFC Core ver 0.1
  134. [    0.213439] NET: Registered protocol family 39
  135. [    0.214111] Switching to clocksource 32k_counter
  136. [    0.244598] NET: Registered protocol family 2
  137. [    0.245330] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  138. [    0.247192] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  139. [    0.250854] TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
  140. [    0.291503] TCP: Hash tables configured (established 131072 bind 65536)
  141. [    0.291656] TCP: reno registered
  142. [    0.291717] UDP hash table entries: 512 (order: 3, 40960 bytes)
  143. [    0.292419] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
  144. [    0.293670] NET: Registered protocol family 1
  145. [    0.296417] omap_dsp_init: 600000 bytes @ bec00000
  146. [    0.478302] fuse init (API version 7.19)
  147. [    0.482574] Btrfs loaded
  148. [    0.482666] msgmni has been set to 1959
  149. [    0.490081] io scheduler noop registered
  150. [    0.490142] io scheduler deadline registered
  151. [    0.490295] io scheduler cfq registered (default)
  152. [    0.550750] OMAP DSS rev 2.0
  153. [    0.550994] OMAP DISPC rev 3.0
  154. [    0.551391] OMAP VENC rev 2
  155. [    0.552215] OMAP DSI rev 1.0
  156. [    0.567779] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  157. [    0.572326] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
  158. [    0.591430] brd: module loaded
  159. [    0.602050] loop: module loaded
  160. [    0.625335] lis3lv02d: 8 bits sensor found
  161. [    0.684204] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input0
  162. [    0.694458] OneNAND driver initializing
  163. [    0.695129] omap2-onenand omap2-onenand: initializing on CS0, phys base 0x04000000, virtual base f0040000, freq 83 MHz
  164. [    0.695465] OneNAND Manufacturer: Samsung (0xec)
  165. [    0.695495] Muxed OneNAND 512MB 1.8V 16-bit (0x50)
  166. [    0.695526] OneNAND version = 0x0232
  167. [    0.695556] Chip support all block unlock
  168. [    0.695587] Chip has 4KiB pagesize
  169. [    0.695587] Chip has cache program feature
  170. [    0.695617] Scanning device for bad blocks
  171. [    0.858428] onenand_bbt_wait: ecc 0xaaaa ctrl 0x0400 intr 0x8080 addr1 0x43e addr8 0x0
  172. [    0.858459] OneNAND eraseblock 1086 is an initial bad block
  173. [    0.903350] onenand_bbt_wait: ecc 0xaaaa ctrl 0x0400 intr 0x8080 addr1 0x56a addr8 0x0
  174. [    0.903381] OneNAND eraseblock 1386 is an initial bad block
  175. [    1.002136] 6 cmdlinepart partitions found on MTD device omap2-onenand
  176. [    1.002197] Creating 6 MTD partitions on "omap2-onenand":
  177. [    1.002227] 0x000000000000-0x000000100000 : "bootloader"
  178. [    1.004730] 0x000000100000-0x0000003c0000 : "config"
  179. [    1.005950] 0x0000003c0000-0x0000013c0000 : "kernel"
  180. [    1.007781] 0x0000013c0000-0x0000015c0000 : "log"
  181. [    1.009613] onenand_wait: correctable ECC error = 0x0001, addr1 0x4f, addr8 0x40
  182. [    1.009765] onenand_wait: correctable ECC error = 0x0001, addr1 0x4f, addr8 0x80
  183. [    1.012512] mtdoops: ready 7, 8 (no erase)
  184. [    1.012512] mtdoops: Attached to MTD device 3
  185. [    1.012573] 0x0000015c0000-0x00001e000000 : "var"
  186. [    1.036865] 0x00001e000000-0x000020000000 : "moslo"
  187. [    1.045288] tun: Universal TUN/TAP device driver, 1.6
  188. [    1.045349] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  189. [    1.046234] usbcore: registered new interface driver asix
  190. [    1.046386] usbcore: registered new interface driver cdc_ether
  191. [    1.046569] usbcore: registered new interface driver smsc95xx
  192. [    1.046691] usbcore: registered new interface driver net1080
  193. [    1.046844] usbcore: registered new interface driver cdc_subset
  194. [    1.046966] usbcore: registered new interface driver zaurus
  195. [    1.047149] usbcore: registered new interface driver cdc_ncm
  196. [    1.048187] usbcore: registered new interface driver cdc_wdm
  197. [    1.048217] Initializing USB Mass Storage driver...
  198. [    1.048400] usbcore: registered new interface driver usb-storage
  199. [    1.048431] USB Mass Storage support registered.
  200. [    1.049011] usbcore: registered new interface driver libusual
  201. [    1.049041] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
  202. [    1.057464] twl4030_usb twl4030_usb: twl4030_phy_resume
  203. [    1.057861] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
  204. [    1.057861] musb-hdrc: MHDRC RTL version 1.800
  205. [    1.057891] musb-hdrc: setup fifo_mode 4
  206. [    1.057922] musb-hdrc: 28/31 max ep, 16384/16384 memory
  207. [    1.060058] musb-hdrc musb-hdrc: USB Peripheral mode controller at fa0ab000 using DMA, IRQ 92
  208. [    1.062194] twl4030_usb twl4030_usb: twl4030_phy_suspend
  209. [    1.064422] input: TWL4030 Keypad as /devices/platform/i2c_omap.1/i2c-1/1-004a/twl4030_keypad/input/input1
  210. [    1.081848] i2c-core: driver [atmel_mxt] using legacy suspend method
  211. [    1.081909] i2c-core: driver [atmel_mxt] using legacy resume method
  212. [    1.083862] input: twl4030_pwrbutton as /devices/platform/i2c_omap.1/i2c-1/1-0049/twl4030_pwrbutton/input/input2
  213. [    1.086090] input: ECI Accessory as /devices/virtual/input/input3
  214. [    1.088287] twl_rtc twl_rtc: Enabling TWL-RTC
  215. [    1.092987] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
  216. [    1.094116] i2c /dev entries driver
  217. [    1.096740] Driver for 1-wire Dallas network protocol.
  218. [    1.101318] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
  219. [    1.102600] Bluetooth: HCI UART driver ver 2.2
  220. [    1.102661] Bluetooth: HCI H4 protocol initialized
  221. [    1.102691] Bluetooth: HCI BCSP protocol initialized
  222. [    1.102722] Bluetooth: HCILL protocol initialized
  223. [    1.102905] hci_h4p hci_h4p: Registering HCI H4P device
  224. [    1.106140] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
  225. [    1.108459] cpuidle: using governor ladder
  226. [    1.108520] cpuidle: using governor menu
  227. [    1.109527] omap_hsmmc omap_hsmmc.1: Failed to get debounce clk
  228. [    1.149169] input: Atmel mXT Touchscreen as /devices/platform/i2c_omap.2/i2c-2/2-004b/input/input4
  229. [    1.150115] atmel_mxt: Atmel mXT Touchscreen v1.1 (0x12a9d8) var:0xc bld:0xac
  230. [    1.153228] omap_hsmmc omap_hsmmc.2: Failed to get debounce clk
  231. [    1.199279] omap_sham_mod_init: loading omap-sham driver
  232. [    1.199615] omap-sham omap-sham: hw accel on OMAP rev 0.9
  233. [    1.201446] mmc0: new high speed MMC card at address 0001
  234. [    1.203369] mmcblk0: mmc0:0001 HYNIX  14.8 GiB
  235. [    1.204284] mmcblk0boot0: mmc0:0001 HYNIX  partition 1 4.00 MiB
  236. [    1.205078] mmcblk0boot1: mmc0:0001 HYNIX  partition 2 4.00 MiB
  237. [    1.211120] usbcore: registered new interface driver usbhid
  238. [    1.211181] usbhid: USB HID core driver
  239. [    1.215026]  mmcblk0: p1 p2 p3 p4
  240. [    1.227783]  mmcblk0boot1: unknown partition table
  241. [    1.235504] DSP Bridge driver loaded
  242. [    1.235931]  mmcblk0boot0: unknown partition table
  243. [    1.252075] ALSA SoC for TWL4030 on Nokia DFL61 init
  244. [    1.313079] twl4030-codec twl4030-codec: ASoC: Failed to create Capture debugfs file
  245. [    1.321472] asoc: twl4030-hifi <-> omap-mcbsp.3 mapping ok
  246. [    1.326385] input: dfl61-twl4030 Jack as /devices/platform/dfl61audio-twl4030/sound/card0/input5
  247. [    1.329101] DFL61 TWL SoC init done (config 4)
  248. [    1.329559] ALSA for WL1273 on Nokia DFL61 init
  249. [    1.329956] Error: -517
  250. [    1.330017] platform dfl61audio-wl1273: Driver dfl61audio-wl1273 requests probe deferral
  251. [    1.330383] ALSA for TLV320DAC33 on Nokia DFL61 init
  252. [    1.339477] asoc: tlv320dac33-hifi <-> omap-mcbsp.2 mapping ok
  253. [    1.342102] DFL61 TLV320DAC33 init done
  254. [    1.342346] oprofile: hardware counters not available
  255. [    1.342376] oprofile: using timer interrupt.
  256. [    1.342834] Netfilter messages via NETLINK v0.30.
  257. [    1.342956] nfnl_acct: registering with nfnetlink.
  258. [    1.343109] nf_conntrack version 0.5.0 (15679 buckets, 62716 max)
  259. [    1.345825] ip_tables: (C) 2000-2006 Netfilter Core Team
  260. [    1.346343] TCP: cubic registered
  261. [    1.346557] NET: Registered protocol family 17
  262. [    1.346832] NET: Registered protocol family 15
  263. [    1.347564] Bluetooth: RFCOMM TTY layer initialized
  264. [    1.347656] Bluetooth: RFCOMM socket layer initialized
  265. [    1.347686] Bluetooth: RFCOMM ver 1.11
  266. [    1.347717] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  267. [    1.347747] Bluetooth: BNEP filters: protocol multicast
  268. [    1.348510] Key type dns_resolver registered
  269. [    1.349151] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  270. [    1.365509] sr_init: No PMIC hook to init smartreflex
  271. [    1.365936] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
  272. [    1.366638] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
  273. [    1.367095] SmartReflex Class3 initialized
  274. [    1.397460] clock: disabling unused clocks to save power
  275. [    1.488739] panel-nokia-dsi display0: himalaya panel revision 38.95.8a
  276. [    1.494812] ALSA for WL1273 on Nokia DFL61 init
  277. [    1.495300] Error: -517
  278. [    1.495391] platform dfl61audio-wl1273: Driver dfl61audio-wl1273 requests probe deferral
  279. [    1.498931] ALSA for WL1273 on Nokia DFL61 init
  280. [    1.499206] Error: -517
  281. [    1.499298] platform dfl61audio-wl1273: Driver dfl61audio-wl1273 requests probe deferral
  282. [    1.500091] ALSA for WL1273 on Nokia DFL61 init
  283. [    1.503051] asoc: wl1273-fm <-> omap-mcbsp.4 mapping ok
  284. [    1.504760] input: gpio-keys as /devices/platform/gpio-keys/input/input6
  285. [    1.507476] ALSA device list:
  286. [    1.507507]   #0: dfl61-twl4030
  287. [    1.507537]   #1: dfl61-dac33
  288. [    1.512664] DFL61 WL1273 init done
  289. [    1.574584] EXT4-fs (mmcblk0p4): recovery complete
  290. [    1.581115] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: errors=remount-ro
  291. [    1.581329] VFS: Mounted root (ext4 filesystem) on device 179:4.
  292. [    1.593566] devtmpfs: mounted
  293. [    1.594085] Freeing init memory: 196K
  294. [    2.075897] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX +IMA +SYSVINIT -LIBCRYPTSETUP +GCRYPT +ACL +XZ)
  295. [    2.383483] NET: Registered protocol family 10
  296. [    2.393554] systemd[1]: Inserted module 'ipv6'
  297. [    2.395843] systemd[1]: No hostname configured.
  298. [    2.396423] systemd[1]: Set hostname to <localhost>.
  299. [    3.119506] systemd[1]: Starting Login Prompts.
  300. [    3.121917] systemd[1]: Reached target Login Prompts.
  301. [    3.122283] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
  302. [    3.126800] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  303. [    3.127166] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
  304. [    3.130493] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  305. [    3.130798] systemd[1]: Starting Delayed Shutdown Socket.
  306. [    3.133270] systemd[1]: Listening on Delayed Shutdown Socket.
  307. [    3.133789] systemd[1]: Starting Collect Read-Ahead Data...
  308. [    3.161102] systemd[1]: Starting udev Kernel Socket.
  309. [    3.163940] systemd[1]: Listening on udev Kernel Socket.
  310. [    3.164428] systemd[1]: Starting udev Control Socket.
  311. [    3.177215] systemd[1]: Listening on udev Control Socket.
  312. [    3.178710] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
  313. [    3.193695] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  314. [    3.194396] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
  315. [    3.196563] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  316. [    3.196899] systemd[1]: Starting Paths.
  317. [    3.208374] systemd[1]: Reached target Paths.
  318. [    3.216369] systemd[1]: Starting Replay Read-Ahead Data...
  319. [    3.235565] systemd[1]: Starting Journal Socket.
  320. [    3.251190] systemd[1]: Listening on Journal Socket.
  321. [    3.252258] systemd[1]: Mounted Huge Pages File System.
  322. [    3.254455] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  323. [    3.279144] systemd[1]: Mounting POSIX Message Queue File System...
  324. [    3.329406] systemd[1]: Starting udev Coldplug all Devices...
  325. [    3.388732] systemd[1]: Starting Journal Service...
  326. [    3.420898] systemd-readahead[72]: Bumped block_nr parameter of 179:0 to 20480. This is a temporary hack and should be removed one day.
  327. [    3.506958] systemd[1]: Started Journal Service.
  328. [    3.744049] systemd-journald[76]: Vacuuming done, freed 0 bytes
  329. [    4.385620] SGX clock rate 195 MHz
  330. [    6.360778] EXT4-fs (mmcblk0p4): re-mounted. Opts: (null)
  331. [    6.613891] systemd-udevd[106]: starting version 208
  332. [    7.829406] systemd-journald[76]: Received request to flush runtime journal from PID 1
  333. [    7.856750] systemd-journald[76]: File /var/log/journal/1cbdf657e8b2430681de62b55a160046/system.journal corrupted or uncleanly shut down, renaming and replacing.
  334. [    8.010345] CMT driver
  335. [    8.512817] twl5031_aci twl5031_aci: found twl5031 ACI v.16
  336. [    8.812896] Loading BCM4751 GPS driver
  337. [    8.850982] i2c-core: driver [bcm4751-gps] using legacy suspend method
  338. [    8.851043] i2c-core: driver [bcm4751-gps] using legacy resume method
  339. [    8.934722] i2c-core: driver [ak8974] using legacy suspend method
  340. [    8.934783] i2c-core: driver [ak8974] using legacy resume method
  341. [    9.113128] input: SPI vibrator as /devices/platform/omap2_mcspi.2/spi_master/spi2/input7
  342. [    9.172882] OMAP SSI hw driver loaded
  343. [    9.792602] i2c_omap i2c_omap.2: controller timed out
  344. [    9.809417] lp5523 2-0032: LP5523 Programmable led chip found
  345. [    9.823883] lp5523 2-0032: disabling engines
  346. [    9.825164] Registered led device: lp5523:channel0
  347. [    9.825988] Registered led device: lp5523:channel1
  348. [    9.826446] Registered led device: lp5523:channel2
  349. [    9.829284] Registered led device: lp5523:channel3
  350. [    9.830444] Registered led device: lp5523:channel4
  351. [    9.831451] Registered led device: lp5523:channel5
  352. [    9.832397] Registered led device: lp5523:channel8
  353. [    9.963958] i2c-core: driver [bhsfh] using legacy suspend method
  354. [    9.964019] i2c-core: driver [bhsfh] using legacy resume method
  355. [   10.223785] HSI/SSI char device loaded
  356. [   10.231689] NET: Registered protocol family 35
  357. [   10.257141] SSI protocol aka McSAAB added
  358. [   10.920135] twl5031_aci twl5031_aci: AV jack open cable as SND_JACK_LINEOUT
  359. [   14.326904] twl5031_aci twl5031_aci: AV jack open cable as SND_JACK_LINEOUT
  360. [   17.620269] twl5031_aci twl5031_aci: AV jack open cable as SND_JACK_LINEOUT
  361. [   17.937774] onenand_wait: correctable ECC error = 0x0100, addr1 0xa, addr8 0x0
  362. [   17.939270] onenand_wait: correctable ECC error = 0x0001, addr1 0x4, addr8 0x3c
  363. [   17.939483] onenand_wait: ECC error = 0x0002, addr1 0x4, addr8 0x44
  364. [   17.939605] onenand_wait: ECC error = 0x0002, addr1 0x4, addr8 0x44
  365. [   17.940063] onenand_wait: correctable ECC error = 0x0100, addr1 0x4, addr8 0x58
  366. [   18.009490] onenand_wait: correctable ECC error = 0x0100, addr1 0x4, addr8 0x84
  367. [   18.010559] onenand_wait: ECC error = 0x0002, addr1 0x4, addr8 0xb0
  368. [   18.010681] onenand_wait: ECC error = 0x0002, addr1 0x4, addr8 0xb0
  369. [   18.011047] onenand_wait: correctable ECC error = 0x0001, addr1 0x4, addr8 0xc0
  370. [   18.047729] onenand_wait: ECC error = 0x0002, addr1 0x5, addr8 0x30
  371. [   18.047882] onenand_wait: correctable ECC error = 0x0001, addr1 0x5, addr8 0x30
  372. [   18.141784] onenand_wait: correctable ECC error = 0x0100, addr1 0xa, addr8 0x0
  373. [   18.146942] onenand_wait: correctable ECC error = 0x0001, addr1 0x4, addr8 0x3c
  374. [   18.476928] onenand_wait: correctable ECC error = 0x0100, addr1 0xa, addr8 0x0
  375. [   18.478393] onenand_wait: correctable ECC error = 0x0001, addr1 0x4, addr8 0x3c
  376. [   18.478637] onenand_wait: ECC error = 0x0002, addr1 0x4, addr8 0x44
  377. [   18.478759] onenand_wait: ECC error = 0x0002, addr1 0x4, addr8 0x44
  378. [   18.479217] onenand_wait: correctable ECC error = 0x0100, addr1 0x4, addr8 0x58
  379. [   18.492218] onenand_wait: correctable ECC error = 0x0100, addr1 0x4, addr8 0x84
  380. [   18.493316] onenand_wait: ECC error = 0x0002, addr1 0x4, addr8 0xb0
  381. [   18.493438] onenand_wait: ECC error = 0x0002, addr1 0x4, addr8 0xb0
  382. [   18.493804] onenand_wait: correctable ECC error = 0x0001, addr1 0x4, addr8 0xc0
  383. [   18.522369] onenand_wait: ECC error = 0x0002, addr1 0x5, addr8 0x30
  384. [   18.522521] onenand_wait: ECC error = 0x0002, addr1 0x5, addr8 0x30
  385. [   18.523345] onenand_wait: correctable ECC error = 0x0100, addr1 0x5, addr8 0x54
  386. [   18.525238] onenand_wait: correctable ECC error = 0x0100, addr1 0xa, addr8 0x0
  387. [   19.549713] ssi_protocol ssi_protocol: WAKELINES TEST OK
  388. [   19.608184] netlink: 12 bytes leftover after parsing attributes.
  389. [   19.608245] netlink: 12 bytes leftover after parsing attributes.
  390. [   20.073455] pvr: glesplash-fb: cleaning up 132 unfreed resources
  391. [   20.167266] netlink: 12 bytes leftover after parsing attributes.
  392. [   20.768615] twl5031_aci twl5031_aci: AV jack open cable as SND_JACK_LINEOUT
  393. [   20.986022] systemd-journald[76]: File /var/log/journal/1cbdf657e8b2430681de62b55a160046/user-100000.journal corrupted or uncleanly shut down, renaming and replacing.
  394. [   21.092163] systemd-journald[76]: Failed to read ACL on /var/log/journal/1cbdf657e8b2430681de62b55a160046/user-100000.journal, ignoring: Operation not supported
  395. [   23.150421] ssi_protocol ssi_protocol: CMT reset detected !
  396. [   23.150573] ssi_protocol ssi_protocol: Main state: 2
  397. [   23.150665] ssi_protocol ssi_protocol: Recv state: 0
  398. [   23.150726] ssi_protocol ssi_protocol: Send state: 0
  399. [   23.150787] ssi_protocol ssi_protocol: CMT Online
  400. [   23.150878] ssi_protocol ssi_protocol: Wake test 0
  401. [   23.150939] ssi_protocol ssi_protocol: Data RX id: 1
  402. [   23.151000] ssi_protocol ssi_protocol: Data TX id: 0
  403. [   23.379577] ssi_protocol ssi_protocol: WAKELINES TEST OK
  404. [   36.341003] twl4030_usb twl4030_usb: HW_CONDITIONS 0xd0/208; link 1
  405. [   36.344879] twl4030_usb twl4030_usb: twl4030_phy_resume
  406. [   36.363739] twl4030_usb twl4030_usb: twl4030_phy_suspend
  407. [   36.419525] DCD succeeded
  408. [   39.280487]  gadget: using random self ethernet address
  409. [   39.330017] usb0: MAC ee:5c:c6:e2:00:f1
  410. [   39.330047] usb0: HOST MAC 0a:56:6c:d0:44:25
  411. [   39.339477]  gadget: Ethernet Gadget, version: Memorial Day 2008
  412. [   39.339599]  gadget: g_ether ready
  413. [   39.392517] twl4030_usb twl4030_usb: twl4030_phy_resume
  414. [   39.604583] twl4030_usb twl4030_usb: twl4030_set_power - mA: 100
  415. [   39.679504] twl4030_usb twl4030_usb: twl4030_set_power - mA: 0
  416. [   39.679962] twl4030_usb twl4030_usb: twl4030_set_power - mA: 100
  417. [   39.767944]  gadget: high-speed config #1: CDC Ethernet (ECM)
  418. [   39.768096] twl4030_usb twl4030_usb: twl4030_set_power - mA: 500
  419. [   40.012756] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
  420. [   40.523437] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
  421. [  103.674713] twl4030_usb twl4030_usb: twl4030_set_power - mA: 2
  422. [  103.986968] twl4030_usb twl4030_usb: twl4030_set_power - mA: 0
  423. [  104.081726] twl4030_usb twl4030_usb: HW_CONDITIONS 0x50/80; link 0
  424. [  104.083404] twl4030_usb twl4030_usb: twl4030_phy_suspend
  425. [  105.369750] twl4030_usb twl4030_usb: HW_CONDITIONS 0xd0/208; link 1
  426. [  105.376190] twl4030_usb twl4030_usb: twl4030_phy_resume
  427. [  105.387512] twl4030_usb twl4030_usb: twl4030_phy_suspend
  428. [  105.464630] DCD succeeded
  429. [  105.512176] twl4030_usb twl4030_usb: twl4030_set_power - mA: 0
  430. [  105.818176]  gadget: using random self ethernet address
  431. [  105.855987] usb0: MAC ce:b2:1a:da:7b:d9
  432. [  105.856048] usb0: HOST MAC 0a:56:6c:d0:44:25
  433. [  105.865417]  gadget: Ethernet Gadget, version: Memorial Day 2008
  434. [  105.865509]  gadget: g_ether ready
  435. [  105.901367] twl4030_usb twl4030_usb: twl4030_phy_resume
  436. [  106.068267] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
  437. [  106.118865] twl4030_usb twl4030_usb: twl4030_set_power - mA: 100
  438. [  106.194091] twl4030_usb twl4030_usb: twl4030_set_power - mA: 0
  439. [  106.194580] twl4030_usb twl4030_usb: twl4030_set_power - mA: 100
  440. [  106.285095]  gadget: high-speed config #1: CDC Ethernet (ECM)
  441. [  106.285247] twl4030_usb twl4030_usb: twl4030_set_power - mA: 500
  442. [  106.292022] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top