API tools faq
paste
Advertisement
bhuvanchandradv

Untitled

bhuvanchandradv
Apr 7th, 2017
109
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 44.48 KB | None | 0 0
raw download clone embed print report
  1. U-Boot SPL 2016.11-2.7.2+g60021a4 (Apr 05 2017 - 21:02:46)
  2. Trying to boot from RAM
  3.  
  4.  
  5. U-Boot 2016.11-2.7.2+g60021a4 (Apr 05 2017 - 21:02:46 +0200)
  6.  
  7. TEGRA30
  8. DRAM: 1 GiB
  9. MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1
  10. ** First descriptor is NOT a primary desc on 0:1 **
  11. *** Warning - bad CRC, using default environment
  12.  
  13. In: serial
  14. Out: vidconsole
  15. Err: vidconsole
  16. Missing Toradex config block
  17. Model: Toradex Colibri T30 1GB
  18. USB recovery mode, disabled autoboot
  19. Net: No ethernet found.
  20. Colibri T30 #
  21. Colibri T30 #
  22. Colibri T30 #
  23. Colibri T30 # setenv serverip 10.18.0.51
  24. Colibri T30 # setenv ipaddr 10.18.0.50
  25. Colibri T30 # run setethupdate
  26. starting USB...
  27. USB0: USB EHCI 1.00
  28. USB1: USB EHCI 1.00
  29. USB2: USB EHCI 1.00
  30. scanning bus 0 for devices... 1 USB Device(s) found
  31. scanning bus 1 for devices...
  32. Warning: asix_eth MAC addresses don't match:
  33. Address in SROM is 00:0e:c6:87:72:01
  34. Address in environment is 00:14:2d:00:00:00
  35. 2 USB Device(s) found
  36. scanning bus 2 for devices... 2 USB Device(s) found
  37. Waiting for Ethernet connection... done.
  38. Using asix_eth device
  39. TFTP from server 10.18.0.51; our IP address is 10.18.0.50
  40. Filename 'flash_eth.img'.
  41. Load address: 0x81000000
  42. Loading: ################################################## 444 Bytes
  43. 85.9 KiB/s
  44. done
  45. Bytes transferred = 444 (1bc hex)
  46. ## Executing script at 81000000
  47. Using asix_eth device
  48. TFTP from server 10.18.0.51; our IP address is 10.18.0.50
  49. Filename 'colibri_t30/flash_eth.img'.
  50. Load address: 0x81000000
  51. Loading: ################################################## 4.1 KiB
  52. 680.7 KiB/s
  53. done
  54. Bytes transferred = 4185 (1059 hex)
  55. ## Executing script at 81000000
  56. enter "run update" to update the entire module
  57. Colibri T30 # run update
  58. ** First descriptor is NOT a primary desc on 0:1 **
  59. switch to partitions #1, OK
  60. mmc0(part 1) is current device
  61.  
  62. MMC read: dev # 0, block # 8191, count 1 ... MMC: block number 0x2000 exceeds max(0x800)
  63. 0 blocks read: ERROR
  64.  
  65. MMC read: dev # 0, block # 4095, count 1 ... MMC: block number 0x1000 exceeds max(0x800)
  66. 0 blocks read: ERROR
  67.  
  68. MMC read: dev # 0, block # 2047, count 1 ... 1 blocks read: OK
  69. crc32 for 81000008 ... 8100000a ==> ff41d912 != 94305232 ** ERROR **
  70. ** First descriptor is NOT a primary desc on 0:1 **
  71. switch to partitions #0, OK
  72. mmc0(part 0) is current device
  73.  
  74. MMC read: dev # 0, block # 24576, count 1 ... 1 blocks read: OK
  75. crc32 for 81000008 ... 8100000a ==> f839fb25 != 94305232 ** ERROR **
  76. ** First descriptor is NOT a primary desc on 0:1 **
  77. switch to partitions #0, OK
  78. mmc0(part 0) is current device
  79.  
  80. MMC read: dev # 0, block # 32768, count 1 ... 1 blocks read: OK
  81. crc32 for 81000008 ... 8100000a ==> 975a6f85 != 94305232 ** ERROR **
  82. ** First descriptor is NOT a primary desc on 0:1 **
  83. switch to partitions #0, OK
  84. mmc0(part 0) is current device
  85.  
  86. MMC read: dev # 0, block # 36864, count 1 ... 1 blocks read: OK
  87. crc32 for 81000008 ... 8100000a ==> c0b7162c != 94305232 ** ERROR **
  88. ** First descriptor is NOT a primary desc on 0:1 **
  89. switch to partitions #0, OK
  90. mmc0(part 0) is current device
  91.  
  92. MMC read: dev # 0, block # 212992, count 1 ... 1 blocks read: OK
  93. crc32 for 81000008 ... 8100000a ==> ff41d912 != 94305232 ** ERROR **
  94. ** First descriptor is NOT a primary desc on 0:1 **
  95. switch to partitions #0, OK
  96. mmc0(part 0) is current device
  97.  
  98. MMC read: dev # 0, block # 221184, count 1 ... 1 blocks read: OK
  99. crc32 for 81000008 ... 8100000a ==> ff41d912 != 94305232 ** ERROR **
  100. ** First descriptor is NOT a primary desc on 0:1 **
  101. switch to partitions #0, OK
  102. mmc0(part 0) is current device
  103.  
  104. MMC read: dev # 0, block # 225280, count 1 ... 1 blocks read: OK
  105. crc32 for 81000008 ... 8100000a ==> ff41d912 != 94305232 ** ERROR **
  106. Using asix_eth device
  107. TFTP from server 10.18.0.51; our IP address is 10.18.0.50
  108. Filename 'colibri_t30/colibri_t30.img'.
  109. Load address: 0x81000000
  110. Loading: ################################################## 523 KiB
  111. 3.6 MiB/s
  112. done
  113. Bytes transferred = 535552 (82c00 hex)
  114. ** First descriptor is NOT a primary desc on 0:1 **
  115. switch to partitions #1, OK
  116. mmc0(part 1) is current device
  117.  
  118. MMC write: dev # 0, block # 0, count 1046 ... 1046 blocks written: OK
  119. Using asix_eth device
  120. TFTP from server 10.18.0.51; our IP address is 10.18.0.50
  121. Filename 'colibri_t30/mbr.bin'.
  122. Load address: 0x81000000
  123. Loading: ################################################## 512 Bytes
  124. 99.6 KiB/s
  125. done
  126. Bytes transferred = 512 (200 hex)
  127. ** First descriptor is NOT a primary desc on 0:1 **
  128. switch to partitions #0, OK
  129. mmc0(part 0) is current device
  130.  
  131. MMC write: dev # 0, block # 0, count 1 ... 1 blocks written: OK
  132. Using asix_eth device
  133. TFTP from server 10.18.0.51; our IP address is 10.18.0.50
  134. Filename 'colibri_t30/boot.vfat'.
  135. Load address: 0x81000000
  136. Loading: ################################################## 16 MiB
  137. 3.7 MiB/s
  138. done
  139. Bytes transferred = 16777216 (1000000 hex)
  140. switch to partitions #0, OK
  141. mmc0(part 0) is current device
  142.  
  143. MMC write: dev # 0, block # 8192, count 32768 ... 32768 blocks written: OK
  144. Using asix_eth device
  145. TFTP from server 10.18.0.51; our IP address is 10.18.0.50
  146. Filename 'colibri_t30/uImage'.
  147. Load address: 0x81000000
  148. Loading: ################################################## 3.9 MiB
  149. 3.7 MiB/s
  150. done
  151. Bytes transferred = 4127704 (3efbd8 hex)
  152. writing uImage
  153. 4127704 bytes written
  154. Using asix_eth device
  155. TFTP from server 10.18.0.51; our IP address is 10.18.0.50
  156. Filename 'colibri_t30/tegra30-colibri-eval-v3.dtb'.
  157. Load address: 0x81000000
  158. Loading: *
  159. TFTP error: 'file /srv/tftp/colibri_t30/tegra30-colibri-eval-v3.dtb not found' (1)
  160. Not retrying...
  161. Using asix_eth device
  162. TFTP from server 10.18.0.51; our IP address is 10.18.0.50
  163. Filename 'colibri_t30/root.ext3-100'.
  164. Load address: 0x81000000
  165. Loading: ################################################## 64 MiB
  166. 3.7 MiB/s
  167. done
  168. Bytes transferred = 67108864 (4000000 hex)
  169. switch to partitions #0, OK
  170. mmc0(part 0) is current device
  171.  
  172. MMC write: dev # 0, block # 40960, count 131072 ... 131072 blocks written: OK
  173. Using asix_eth device
  174. TFTP from server 10.18.0.51; our IP address is 10.18.0.50
  175. Filename 'colibri_t30/root.ext3-101'.
  176. Load address: 0x81000000
  177. Loading: ################################################## 64 MiB
  178. 2.9 MiB/s
  179. done
  180. Bytes transferred = 67108864 (4000000 hex)
  181. switch to partitions #0, OK
  182. mmc0(part 0) is current device
  183.  
  184. MMC write: dev # 0, block # 172032, count 131072 ... 131072 blocks written: OK
  185. Using asix_eth device
  186. TFTP from server 10.18.0.51; our IP address is 10.18.0.50
  187. Filename 'colibri_t30/root.ext3-102'.
  188. Load address: 0x81000000
  189. Loading: ################################################## 64 MiB
  190. 3.7 MiB/s
  191. done
  192. Bytes transferred = 67108864 (4000000 hex)
  193. switch to partitions #0, OK
  194. mmc0(part 0) is current device
  195.  
  196. MMC write: dev # 0, block # 303104, count 131072 ... 131072 blocks written: OK
  197. Using asix_eth device
  198. TFTP from server 10.18.0.51; our IP address is 10.18.0.50
  199. Filename 'colibri_t30/root.ext3-103'.
  200. Load address: 0x81000000
  201. Loading: ################################################## 64 MiB
  202. 2.8 MiB/s
  203. done
  204. Bytes transferred = 67108864 (4000000 hex)
  205. switch to partitions #0, OK
  206. mmc0(part 0) is current device
  207.  
  208. MMC write: dev # 0, block # 434176, count 131072 ... 131072 blocks written: OK
  209. Using asix_eth device
  210. TFTP from server 10.18.0.51; our IP address is 10.18.0.50
  211. Filename 'colibri_t30/root.ext3-104'.
  212. Load address: 0x81000000
  213. Loading: ################################################## 64 MiB
  214. 2.8 MiB/s
  215. done
  216. Bytes transferred = 67108864 (4000000 hex)
  217. switch to partitions #0, OK
  218. mmc0(part 0) is current device
  219.  
  220. MMC write: dev # 0, block # 565248, count 131072 ... tegra_mmc_send_cmd_bounced: waiting for status update
  221. mmc fail to send stop cmd
  222. 0 blocks written: ERROR
  223. Using asix_eth device
  224. TFTP from server 10.18.0.51; our IP address is 10.18.0.50
  225. Filename 'colibri_t30/root.ext3-105'.
  226. Load address: 0x81000000
  227. Loading: ################################################## 64 MiB
  228. 3.7 MiB/s
  229. done
  230. Bytes transferred = 67108864 (4000000 hex)
  231. switch to partitions #0, OK
  232. mmc0(part 0) is current device
  233.  
  234. MMC write: dev # 0, block # 696320, count 131072 ... 131072 blocks written: OK
  235. Using asix_eth device
  236. TFTP from server 10.18.0.51; our IP address is 10.18.0.50
  237. Filename 'colibri_t30/root.ext3-106'.
  238. Load address: 0x81000000
  239. Loading: ################################################## 41 MiB
  240. 2.5 MiB/s
  241. done
  242. Bytes transferred = 42991616 (2900000 hex)
  243. switch to partitions #0, OK
  244. mmc0(part 0) is current device
  245.  
  246. MMC write: dev # 0, block # 827392, count 83968 ... 83968 blocks written: OK
  247. resetting ...
  248.  
  249. U-Boot SPL 2016.11-2.7.2+g60021a4 (Apr 05 2017 - 21:02:46)
  250. Trying to boot from RAM
  251.  
  252.  
  253. U-Boot 2016.11-2.7.2+g60021a4 (Apr 05 2017 - 21:02:46 +0200)
  254.  
  255. TEGRA30
  256. DRAM: 1 GiB
  257. MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1
  258. *** Warning - bad CRC, using default environment
  259.  
  260. In: serial
  261. Out: vidconsole
  262. Err: vidconsole
  263. Missing Toradex config block
  264. Model: Toradex Colibri T30 1GB
  265. Net: No ethernet found.
  266. Hit any key to stop autoboot: 0
  267. Booting from internal eMMC chip...
  268. reading tegra30-colibri-eval-v3.dtb
  269. ** Unable to read file tegra30-colibri-eval-v3.dtb **
  270. reading uImage
  271. 4127704 bytes read in 165 ms (23.9 MiB/s)
  272. ## Booting kernel from Legacy Image at 81000000 ...
  273. Image Name: Linux-3.1.10-2.7.2+ge8678dd
  274. Image Type: ARM Linux Kernel Image (uncompressed)
  275. Data Size: 4127640 Bytes = 3.9 MiB
  276. Load Address: 80008000
  277. Entry Point: 80008000
  278. Verifying Checksum ... OK
  279. Loading Kernel Image ... OK
  280.  
  281. Starting kernel ...
  282.  
  283. [ 0.000000] Linux version 3.1.10-2.7.2+ge8678dd (linuxdev@linuxdev.toradex.int) (gcc version 6.2.1 20161016 (L7
  284. [ 0.000000] CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
  285. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  286. [ 0.000000] Machine: Toradex Colibri T30
  287. [ 0.000000] Found fbmem: 00c00000@bf400000
  288. [ 0.000000] Tegra reserved memory:
  289. [ 0.000000] LP0: 00000000 - 00000000
  290. [ 0.000000] Bootloader framebuffer: bf400000 - bfffffff
  291. [ 0.000000] Bootloader framebuffer2: 00000000 - 00000000
  292. [ 0.000000] Framebuffer: be700000 - beffffff
  293. [ 0.000000] 2nd Framebuffer: bf000000 - bfffffff
  294. [ 0.000000] Carveout: 00000000 - 00000000
  295. [ 0.000000] Vpr: 00000000 - 00000000
  296. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  297. [ 0.000000] fuse_speedo_calib: ATE prog ver 3.7
  298. [ 0.000000] Tegra3: CPU Speedo ID 2, Soc Speedo ID 2
  299. [ 0.000000] Tegra Revision: A03 SKU: 0x81 CPU Process: 1 Core Process: 0
  300. [ 0.000000] tegra: PLLP fixed rate: 408000000
  301. [ 0.000000] Lowering sbus maximum rate from 378000000 to 334000000
  302. [ 0.000000] Lowering vde maximum rate from 600000000 to 520000000
  303. [ 0.000000] Lowering mpe maximum rate from 600000000 to 520000000
  304. [ 0.000000] Lowering 2d maximum rate from 600000000 to 520000000
  305. [ 0.000000] Lowering epp maximum rate from 600000000 to 520000000
  306. [ 0.000000] Lowering 3d maximum rate from 600000000 to 520000000
  307. [ 0.000000] Lowering 3d2 maximum rate from 600000000 to 520000000
  308. [ 0.000000] Lowering se maximum rate from 625000000 to 520000000
  309. [ 0.000000] Lowering host1x maximum rate from 300000000 to 267000000
  310. [ 0.000000] Lowering cbus maximum rate from 700000000 to 520000000
  311. [ 0.000000] Lowering pll_c maximum rate from 1400000000 to 1066000000
  312. [ 0.000000] Lowering ndflash maximum rate from 240000000 to 200000000
  313. [ 0.000000] Lowering sbc1 maximum rate from 160000000 to 100000000
  314. [ 0.000000] Lowering sbc2 maximum rate from 160000000 to 100000000
  315. [ 0.000000] Lowering sbc3 maximum rate from 160000000 to 100000000
  316. [ 0.000000] Lowering sbc4 maximum rate from 160000000 to 100000000
  317. [ 0.000000] Lowering sbc5 maximum rate from 160000000 to 100000000
  318. [ 0.000000] Lowering sbc6 maximum rate from 160000000 to 100000000
  319. [ 0.000000] Lowering dsia maximum rate from 500000000 to 432500000
  320. [ 0.000000] Lowering dsib maximum rate from 500000000 to 432500000
  321. [ 0.000000] Lowering cpu_g maximum rate from 1700000000 to 1400000000
  322. [ 0.000000] tegra3_dvfs: cold offset 50000000 is too high for regular dvfs limit 1000000
  323. [ 0.000000] tegra3_dvfs: cold offset 50000000 is too high for regular dvfs limit 1000000
  324. [ 0.000000] tegra3_dvfs: cold offset 50000000 is too high for regular dvfs limit 1000000
  325. [ 0.000000] tegra3_dvfs: cold offset 50000000 is too high for regular dvfs limit 1000000
  326. [ 0.000000] tegra dvfs: VDD_CPU nominal 1150mV, scaling enabled
  327. [ 0.000000] tegra dvfs: VDD_CORE nominal 1300mV, scaling enabled
  328. [ 0.000000] tegra_dvfs: rate 408000000 too high for dvfs on sdmmc1
  329. [ 0.000000] Unable to set clock sdmmc1 to rate 48000000: -22
  330. [ 0.000000] tegra_dvfs: rate 408000000 too high for dvfs on sdmmc3
  331. [ 0.000000] Unable to set clock sdmmc3 to rate 48000000: -22
  332. [ 0.000000] L310 cache controller enabled
  333. [ 0.000000] l2x0: 8 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e080001, Cache size: 1048576 B
  334. [ 0.000000] PERCPU: Embedded 8 pages/cpu @c12f6000 s10336 r8192 d14240 u32768
  335. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 253211
  336. [ 0.000000] Kernel command line: core_edp_mv=1300 usb_high_speed=1 ip=off root=/dev/mmcblk0p2 rw,noatime rootf0
  337. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  338. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  339. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  340. [ 0.000000] Memory: 998MB = 998MB total
  341. [ 0.000000] Memory: 1001600k/1001600k available, 34688k reserved, 235520K highmem
  342. [ 0.000000] Virtual kernel memory layout:
  343. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  344. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  345. [ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
  346. [ 0.000000] vmalloc : 0xf0800000 - 0xf8000000 ( 120 MB)
  347. [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
  348. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  349. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  350. [ 0.000000] .text : 0xc0008000 - 0xc07d953c (8006 kB)
  351. [ 0.000000] .init : 0xc07da000 - 0xc082a860 ( 323 kB)
  352. [ 0.000000] .data : 0xc082c000 - 0xc08b6d84 ( 556 kB)
  353. [ 0.000000] .bss : 0xc08b6da8 - 0xc092be90 ( 469 kB)
  354. [ 0.000000] Preemptible hierarchical RCU implementation.
  355. [ 0.000000] NR_IRQS:800
  356. [ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
  357. [ 0.000000] Console: colour dummy device 80x30
  358. [ 0.000000] console [tty1] enabled
  359. [ 0.003256] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)
  360. [ 0.090135] pid_max: default: 32768 minimum: 301
  361. [ 0.090511] Mount-cache hash table entries: 512
  362. [ 0.091810] Initializing cgroup subsys blkio
  363. [ 0.091956] CPU: Testing write buffer coherency: ok
  364. [ 0.092064] ftrace: allocating 22465 entries in 67 pages
  365. [ 0.125069] Brought up 4 CPUs
  366. [ 0.125124] SMP: Total of 4 processors activated (4787.40 BogoMIPS).
  367. [ 0.126341] devtmpfs: initialized
  368. [ 0.131980] print_constraints: dummy:
  369. [ 0.132427] NET: Registered protocol family 16
  370. [ 0.133804] host1x bus init
  371. [ 0.134045] Serial: 8250/16550 driver, 9 ports, IRQ sharing disabled
  372. [ 0.401965] Unable to set clock clk_out_2 to rate 24000000: -38
  373. [ 0.407319] colibri_t30_edp_init: CPU regulator 6000 mA
  374. [ 0.407412] Selecting UARTA as the debug console
  375. [ 0.407454] The debug console clock name is uarta_dbg
  376. [ 0.407838] serial8250.0: ttyS0 at MMIO 0x70006000 (irq = 68) is a Tegra
  377. [ 0.973152] console [ttyS0] enabled
  378. [ 1.003508] Registering the device TPS62360
  379. [ 1.008302] Clear bootloader IO dpd settings
  380. [ 1.119097] tegra: validated EMC DFS table
  381. [ 1.125581] tegra_iovmm_register: added iovmm-smmu
  382. [ 1.141356] bio: create slab <bio-0> at 0
  383. [ 1.146249] i2c-core: driver [tps6591x] using legacy suspend method
  384. [ 1.152562] i2c-core: driver [tps6591x] using legacy resume method
  385. [ 1.159242] SCSI subsystem initialized
  386. [ 1.163992] usbcore: registered new interface driver usbfs
  387. [ 1.169628] usbcore: registered new interface driver hub
  388. [ 1.175118] usbcore: registered new device driver usb
  389. [ 1.180327] colibri-otg colibri-otg: otg transceiver registered
  390. [ 1.187954] stmpe 4-0041: stmpe811 detected, chip id: 0x811
  391. [ 1.194870] tps6591x 4-002d: VERNUM is 02
  392. [ 1.200866] print_constraints: tps6591x_VDD_1: 1350 mV normal standby
  393. [ 1.208820] print_constraints: tps6591x_VDD_2: 1050 mV normal standby
  394. [ 1.216772] print_constraints: tps6591x_VDDCTRL: 800 <--> 1300 mV at 1012 mV normal standby
  395. [ 1.225842] print_constraints: tps6591x_VIO: 1800 mV normal standby
  396. [ 1.232809] print_constraints: tps6591x_LDO_1: 1000 <--> 3300 mV at 2850 mV normal standby
  397. [ 1.241117] set_supply: tps6591x_LDO_1: supplied by tps6591x_VIO
  398. [ 1.248331] print_constraints: tps6591x_LDO_2: 1200 mV normal standby
  399. [ 1.254833] set_supply: tps6591x_LDO_2: supplied by tps6591x_VIO
  400. [ 1.261415] print_constraints: tps6591x_LDO_3: 1200 mV normal standby
  401. [ 1.268576] print_constraints: tps6591x_LDO_4: 1000 <--> 1400 mV at 1200 mV normal standby
  402. [ 1.277409] print_constraints: tps6591x_LDO_5: 2800 mV normal standby
  403. [ 1.284396] print_constraints: tps6591x_LDO_6: 1000 <--> 1100 mV at 1000 mV normal standby
  404. [ 1.292727] set_supply: tps6591x_LDO_6: supplied by tps6591x_VIO
  405. [ 1.300043] print_constraints: tps6591x_LDO_7: 1200 mV normal standby
  406. [ 1.306548] set_supply: tps6591x_LDO_7: supplied by tps6591x_VIO
  407. [ 1.313603] print_constraints: tps6591x_LDO_8: 1000 mV normal standby
  408. [ 1.320089] set_supply: tps6591x_LDO_8: supplied by tps6591x_VIO
  409. [ 1.328791] print_constraints: tps62360: 900 <--> 1400 mV at 1230 mV normal standby
  410. [ 1.337085] Advanced Linux Sound Architecture Driver Version 1.0.24.
  411. [ 1.344137] Bluetooth: Core ver 2.16
  412. [ 1.347812] NET: Registered protocol family 31
  413. [ 1.352296] Bluetooth: HCI device and connection manager initialized
  414. [ 1.358673] Bluetooth: HCI socket layer initialized
  415. [ 1.363581] Bluetooth: L2CAP socket layer initialized
  416. [ 1.368695] Bluetooth: SCO socket layer initialized
  417. [ 1.374043] cfg80211: Calling CRDA to update world regulatory domain
  418. [ 1.381985] print_constraints: fixed_reg_en_hdmi: 1800 mV normal
  419. [ 1.388399] print_constraints: fixed_reg_v3_3: 3300 mV normal
  420. [ 1.395390] tegra: started io power detection dynamic control
  421. [ 1.401162] tegra: NO_IO_POWER setting 0x200
  422. [ 1.405472] Switching to clocksource timer_us
  423. [ 1.423639] nvmap_page_pool_init: nvmap uc page pool size=31300 pages
  424. [ 1.464385] nvmap_page_pool_init: nvmap pool = uc, highmem=31300, pool_size=31300,totalram=250400, freeram=2185
  425. [ 1.618932] nvmap_page_pool_init: nvmap wc page pool size=31300 pages
  426. [ 1.666832] nvmap_page_pool_init: nvmap pool = wc, highmem=27456, pool_size=31300,totalram=250400, freeram=1860
  427. [ 1.823411] nvmap_page_pool_init: nvmap iwb page pool size=31300 pages
  428. [ 1.921569] nvmap_page_pool_init: nvmap pool = iwb, highmem=0, pool_size=31300,totalram=250400, freeram=1556250
  429. [ 2.097126] tegra-nvmap tegra-nvmap: created carveout iram (255KiB)
  430. [ 2.118425] NET: Registered protocol family 2
  431. [ 2.123136] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  432. [ 2.130992] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  433. [ 2.140965] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  434. [ 2.149408] TCP: Hash tables configured (established 131072 bind 65536)
  435. [ 2.156061] TCP reno registered
  436. [ 2.159227] UDP hash table entries: 512 (order: 2, 16384 bytes)
  437. [ 2.165221] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  438. [ 2.172034] NET: Registered protocol family 1
  439. [ 2.176902] RPC: Registered named UNIX socket transport module.
  440. [ 2.182874] RPC: Registered udp transport module.
  441. [ 2.187596] RPC: Registered tcp transport module.
  442. [ 2.192332] RPC: Registered tcp NFSv4.1 backchannel transport module.
  443. [ 2.201879] host1x host1x: initialized
  444. [ 2.205777] PMU: registered new PMU device of type 0
  445. [ 2.211374] Tegra auto-hotplug initialized: disabled
  446. [ 2.216372] cpu-tegra: init EDP limit: 1250 MHz
  447. [ 2.242259] highmem bounce pool size: 64 pages
  448. [ 2.247327] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  449. [ 2.254316] fuse init (API version 7.17)
  450. [ 2.258512] msgmni has been set to 1496
  451. [ 2.263181] io scheduler noop registered (default)
  452. [ 2.269544] mpe mpe: initialized
  453. [ 2.275043] gr3d gr3d: initialized
  454. [ 2.280623] gr2d gr2d: initialized
  455. [ 2.284519] isp isp: initialized
  456. [ 2.288288] tegradc tegradc.0: probed
  457. [ 2.292067] tegradc tegradc.0: use cmd options for tegrafb0: 640x480-16@60
  458. [ 2.298964] tegradc tegradc.0: switching framebuffer to 640x480
  459. [ 2.304896] tegradc tegradc.0: Calculated sync href=0 vref=1
  460. [ 2.310564] tegradc tegradc.0: using mode 640x480 pclk=25175000 href=0 vref=1
  461. [ 2.322230] tegradc tegradc.0: switching framebuffer to 640x480
  462. [ 2.322238] tegradc tegradc.0: Calculated sync href=0 vref=1
  463. [ 2.322247] tegradc tegradc.0: using mode 640x480 pclk=25175000 href=0 vref=1
  464. [ 2.360230] Console: switching to colour frame buffer device 80x30
  465. [ 2.405149] tegradc tegradc.0: probed
  466. [ 2.424796] tegradc tegradc.1: probed
  467. [ 2.429597] tegradc tegradc.1: use default mode for tegrafb1: 640x480-16@60
  468. [ 2.437491] tegradc tegradc.1: Unusuall display aspect ratio. You may encounter problems with n
  469. [ 2.450637] tegradc tegradc.1: Unusuall display aspect ratio. You may encounter problems with n
  470. [ 2.463848] tegradc tegradc.1: Unusuall display aspect ratio. You may encounter problems with n
  471. [ 2.477099] tegradc tegradc.1: switching framebuffer to 640x480
  472. [ 2.484026] tegradc tegradc.1: using mode 640x480 pclk=23750000 href=1 vref=1
  473. [ 2.497224] tegradc tegradc.1: hdmi: can't set audio to 44100 at 23750000 pix_clock
  474. [ 2.505968] tegradc tegradc.1: probed
  475. [ 2.560928] tegra_uart.3: ttyHS3 at MMIO 0x70006300 (irq = 122) is a TEGRA_UART
  476. [ 2.679909] Registered UART port ttyHS3
  477. [ 2.685169] tegra_uart.1: ttyHS1 at MMIO 0x70006040 (irq = 69) is a TEGRA_UART
  478. [ 2.839945] Registered UART port ttyHS1
  479. [ 2.846268] Initialized tegra uart driver
  480. [ 2.858033] loop: module loaded
  481. [ 2.864454] PPP generic driver version 2.4.2
  482. [ 2.871351] PPP Deflate Compression module registered
  483. [ 2.878674] PPP BSD Compression module registered
  484. [ 2.886708] PPP MPPE Compression module registered
  485. [ 2.893881] NET: Registered protocol family 24
  486. [ 2.901291] tun: Universal TUN/TAP device driver, 1.6
  487. [ 2.908657] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  488. [ 2.917538] usbcore: registered new interface driver asix
  489. [ 2.925360] usbcore: registered new interface driver cdc_ether
  490. [ 2.933484] usbcore: registered new interface driver cdc_subset
  491. [ 2.941595] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  492. [ 2.950397] tegra USB phy - inst[1] platform info:
  493. [ 2.957331] port_otg: no
  494. [ 2.961919] has_hostpc: yes
  495. [ 2.966698] phy_interface: USB_PHY_INTF_UTMI
  496. [ 2.972951] op_mode: TEGRA_USB_OPMODE_HOST
  497. [ 2.978979] vbus_gpio: -1
  498. [ 2.983469] vbus_gpio_inverted: 0
  499. [ 2.988572] vbus_reg: NULL
  500. [ 2.993062] hot_plug: disabled
  501. [ 2.997846] remote_wakeup: enabled
  502. [ 3.007825] tegra-ehci tegra-ehci.1: Tegra EHCI Host Controller
  503. [ 3.015671] tegra-ehci tegra-ehci.1: new USB bus registered, assigned bus number 1
  504. [ 3.049972] tegra-ehci tegra-ehci.1: irq 53, io mem 0x7d004000
  505. [ 3.069939] tegra-ehci tegra-ehci.1: USB 2.0 started, EHCI 1.00
  506. [ 3.077796] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  507. [ 3.086519] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  508. [ 3.097434] usb usb1: Product: Tegra EHCI Host Controller
  509. [ 3.104773] usb usb1: Manufacturer: Linux 3.1.10-2.7.2+ge8678dd ehci_hcd
  510. [ 3.113470] usb usb1: SerialNumber: tegra-ehci.1
  511. [ 3.120666] hub 1-0:1.0: USB hub found
  512. [ 3.126372] hub 1-0:1.0: 1 port detected
  513. [ 3.133264] tegra USB phy - inst[2] platform info:
  514. [ 3.139971] port_otg: no
  515. [ 3.144330] has_hostpc: yes
  516. [ 3.148916] phy_interface: USB_PHY_INTF_UTMI
  517. [ 3.155004] op_mode: TEGRA_USB_OPMODE_HOST
  518. [ 3.160941] vbus_gpio: 178
  519. [ 3.165438] vbus_gpio_inverted: 1
  520. [ 3.170517] vbus_reg: NULL
  521. [ 3.174993] hot_plug: enabled
  522. [ 3.179755] remote_wakeup: enabled
  523. [ 3.186249] tegra-ehci tegra-ehci.2: Tegra EHCI Host Controller
  524. [ 3.194135] tegra-ehci tegra-ehci.2: new USB bus registered, assigned bus number 2
  525. [ 3.230009] tegra-ehci tegra-ehci.2: irq 129, io mem 0x7d008000
  526. [ 3.249940] tegra-ehci tegra-ehci.2: USB 2.0 started, EHCI 1.00
  527. [ 3.257792] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  528. [ 3.266543] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  529. [ 3.277422] usb usb2: Product: Tegra EHCI Host Controller
  530. [ 3.284710] usb usb2: Manufacturer: Linux 3.1.10-2.7.2+ge8678dd ehci_hcd
  531. [ 3.293335] usb usb2: SerialNumber: tegra-ehci.2
  532. [ 3.300465] hub 2-0:1.0: USB hub found
  533. [ 3.306058] hub 2-0:1.0: 1 port detected
  534. [ 3.312381] Initializing USB Mass Storage driver...
  535. [ 3.319269] usbcore: registered new interface driver usb-storage
  536. [ 3.327245] USB Mass Storage support registered.
  537. [ 3.333952] usbcore: registered new interface driver libusual
  538. [ 3.341847] usbcore: registered new interface driver usbserial
  539. [ 3.349651] USB Serial support registered for generic
  540. [ 3.449962] usb 1-1: new high speed USB device number 2 using tegra-ehci
  541. [ 3.601605] usb 1-1: New USB device found, idVendor=0b95, idProduct=772b
  542. [ 3.610622] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  543. [ 3.620114] usb 1-1: Product: AX88772B
  544. [ 3.626110] usb 1-1: Manufacturer: ASIX Elec. Corp.
  545. [ 3.633396] usb 1-1: SerialNumber: 000001
  546. [ 3.641008] ASIX USB Ethernet Adapter:v4.17.0 19:19:40 Apr 4 2017
  547. [ 3.641017] http://www.asix.com.tw
  548. [ 3.670469] eth%d: using default ASIX MAC
  549. [ 3.676725] Found invalid EEPROM MAC address value 00-0E-C6-87-72-01
  550. [ 3.760100] eth%d: Found invalid EEPROM part or non-EEPROM
  551. [ 4.471968] eth%d: status ep1in, 8 bytes period 11
  552. [ 4.479622] eth0: register 'asix' at usb-tegra-ehci.1-1, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:cf:ca
  553. [ 4.494453] usbcore: registered new interface driver usbserial_generic
  554. [ 4.503319] usbserial: USB Serial Driver core
  555. [ 4.510050] USB Serial support registered for pl2303
  556. [ 4.517425] usbcore: registered new interface driver pl2303
  557. [ 4.525417] pl2303: Prolific PL2303 USB to serial adaptor driver
  558. [ 4.533804] Nvidia Tegra High-Speed USB SOC Device Controller driver (Apr 30, 2012)
  559. [ 4.546327] tegra USB phy - inst[0] platform info:
  560. [ 4.553523] port_otg: yes
  561. [ 4.558496] has_hostpc: yes
  562. [ 4.563589] phy_interface: USB_PHY_INTF_UTMI
  563. [ 4.570145] op_mode: TEGRA_USB_OPMODE_DEVICE
  564. [ 4.576681] vbus_pmu_irq: 0
  565. [ 4.581677] vbus_gpio: -1
  566. [ 4.586386] charging: disabled
  567. [ 4.591568] remote_wakeup: disabled
  568. [ 4.599706] tegra-udc tegra-udc.0: usb_bat_chg regulator not registered: USB charging will not be enabled
  569. [ 4.619961] usb 2-1: new high speed USB device number 2 using tegra-ehci
  570. [ 4.713878] colibri-otg colibri-otg: SUSPEND --> HOST
  571. [ 4.721683] tegra USB phy - inst[0] platform info:
  572. [ 4.722208] android_usb gadget: Mass Storage Function, version: 2009/09/11
  573. [ 4.722224] android_usb gadget: Number of LUNs=1
  574. [ 4.722237] lun0: LUN: removable file: (no medium)
  575. [ 4.722689] android_usb gadget: android_usb ready
  576. [ 4.722702] tegra-udc: bind to driver android_usb
  577. [ 4.766298] port_otg: yes
  578. [ 4.771082] has_hostpc: yes
  579. [ 4.775940] phy_interface: USB_PHY_INTF_UTMI
  580. [ 4.782313] op_mode: TEGRA_USB_OPMODE_HOST
  581. [ 4.788434] vbus_gpio: -1
  582. [ 4.793024] vbus_gpio_inverted: 0
  583. [ 4.798201] vbus_reg: NULL
  584. [ 4.802750] hot_plug: enabled
  585. [ 4.807553] remote_wakeup: enabled
  586. [ 4.814105] tegra-ehci tegra-ehci.0: Tegra EHCI Host Controller
  587. [ 4.821958] tegra-ehci tegra-ehci.0: new USB bus registered, assigned bus number 3
  588. [ 4.833560] input: stmpe-ts as /devices/virtual/input/input0
  589. [ 4.842462] tegra-i2c tegra-i2c.0: I2c error status 0x00000008
  590. [ 4.850361] tegra-i2c tegra-i2c.0: no acknowledge from address 0x68
  591. [ 4.858648] tegra-i2c tegra-i2c.0: Packet status 0x00010009
  592. [ 4.866260] tegra-ehci tegra-ehci.0: irq 52, io mem 0x7d000000
  593. [ 4.870039] rtc-ds1307: probe of 0-0068 failed with error -5
  594. [ 4.870651] using rtc device, tegra_rtc, for alarms
  595. [ 4.870696] tegra_rtc tegra_rtc: rtc core: registered tegra_rtc as rtc0
  596. [ 4.870731] tegra_rtc tegra_rtc: Tegra internal Real Time Clock
  597. [ 4.905211] usb 2-1: New USB device found, idVendor=0424, idProduct=2514
  598. [ 4.913995] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  599. [ 4.919973] rtc_tps6591x rtc_tps6591x.0: RTC Time : 1/1/2000 0:0:0
  600. [ 4.931498] tegra-ehci tegra-ehci.0: USB 2.0 started, EHCI 1.00
  601. [ 4.939525] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  602. [ 4.948458] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  603. [ 4.960022] usb usb3: Product: Tegra EHCI Host Controller
  604. [ 4.960052] tps6591x 4-002d:
  605. [ 4.960059] getting alarm time::
  606. [ 4.960074] rtc_tps6591x rtc_tps6591x.0: RTC Time : 1/1/2000 0:0:0
  607. [ 4.960244] hub 2-1:1.0: USB hub found
  608. [ 4.960321] rtc_tps6591x rtc_tps6591x.0: rtc core: registered rtc_tps6591x as rtc1
  609. [ 5.005286] usb usb3: Manufacturer: Linux 3.1.10-2.7.2+ge8678dd ehci_hcd
  610. [ 5.005304] hub 2-1:1.0: 4 ports detected
  611. [ 5.020971] usb usb3: SerialNumber: tegra-ehci.0
  612. [ 5.029183] hub 3-0:1.0: USB hub found
  613. [ 5.034156] hub 3-0:1.0: 1 port detected
  614. [ 5.042212] rtc_tps6591x rtc_tps6591x.0: RTC Time : 1/1/2000 0:0:0
  615. [ 5.240019] i2c /dev entries driver
  616. [ 5.247564] lirc_dev: IR Remote Control driver registered, major 244
  617. [ 5.257082] IR NEC protocol handler initialized
  618. [ 5.264597] IR RC5(x) protocol handler initialized
  619. [ 5.272370] IR RC6 protocol handler initialized
  620. [ 5.279834] IR JVC protocol handler initialized
  621. [ 5.287230] IR Sony protocol handler initialized
  622. [ 5.294924] IR RC5 (streamzap) protocol handler initialized
  623. [ 5.303343] IR MCE Keyboard/mouse protocol handler initialized
  624. [ 5.311981] IR LIRC bridge handler initialized
  625. [ 5.319151] Linux video capture interface: v2.00
  626. [ 5.326671] usbcore: registered new interface driver uvcvideo
  627. [ 5.335250] USB Video Class driver (1.1.1)
  628. [ 5.342437] trpc_sema_init: registered misc dev 10:55
  629. [ 5.350550] trpc_node_register: Adding 'local' to node list
  630. [ 5.360689] nvavp nvavp: allocated IOVM at ff00000 for AVP os
  631. [ 5.378912] tegra_wdt tegra_wdt.0: tegra_wdt_probe done
  632. [ 5.387205] tegra_wdt tegra_wdt.1: tegra_wdt_probe done
  633. [ 5.395595] tegra_wdt tegra_wdt.2: tegra_wdt_probe done
  634. [ 5.403394] Bluetooth: HCI UART driver ver 2.2
  635. [ 5.410258] Bluetooth: HCI H4 protocol initialized
  636. [ 5.417401] Bluetooth: HCILL protocol initialized
  637. [ 5.424485] Bluetooth: BlueSleep Mode Driver Ver 1.1
  638. [ 5.432693] cpuidle: using governor ladder
  639. [ 5.439968] cpuidle: using governor menu
  640. [ 5.446213] sdhci: Secure Digital Host Controller Interface driver
  641. [ 5.454736] sdhci: Copyright(c) Pierre Ossman
  642. [ 5.461337] sdhci-pltfm: SDHCI platform and OF driver helper
  643. [ 5.469247] sdhci_tegra_init+ #####
  644. [ 5.475191] sdhci-tegra sdhci-tegra.3: Error: tegra3 io dpd not supported for sdhci-tegra.3
  645. [ 5.489467] mmc0: Invalid maximum block size, assuming 512 bytes
  646. [ 5.498283] mmc0: no vmmc regulator found
  647. [ 5.509524] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA
  648. [ 5.522275] sdhci-tegra sdhci-tegra.1: vddio_sdmmc regulator not found: -19.Assuming vddio_sdmmc is not requir.
  649. [ 5.538503] sdhci-tegra sdhci-tegra.1: Error: tegra3 io dpd not supported for sdhci-tegra.1
  650. [ 5.551282] mmc1: Invalid maximum block size, assuming 512 bytes
  651. [ 5.561386] mmc1: no vmmc regulator found
  652. [ 5.576161] mmc1: SDHCI controller on sdhci-tegra.1 [sdhci-tegra.1] using ADMA
  653. [ 5.587597] sdhci_tegra_init- #####
  654. [ 5.603984] tegra-se tegra-se: tegra_se_probe: complete
  655. [ 5.610481] usbcore: registered new interface driver usbhid
  656. [ 5.618454] usbhid: USB HID core driver
  657. [ 5.625003] stmpe-adc stmpe-adc.1: Initialized
  658. [ 5.632408] [mmc]:mmc_decode_cid:123 cid.prv 0x56
  659. [ 5.649675] [mmc]:mmc_read_ext_csd:297 ext_csd.sectors 0x0 prod_name HYNIX BOOT_MULTI 0x8
  660. [ 5.661996] mmc0: new high speed DDR MMC card at address 0001
  661. [ 5.669318] mmcblk0: mmc0:0001 HYNIX 1.68 GiB
  662. [ 5.675218] mmcblk0boot0: mmc0:0001 HYNIX partition 1 1.00 MiB
  663. [ 5.682536] mmcblk0boot1: mmc0:0001 HYNIX partition 2 1.00 MiB
  664. [ 5.691295] mmcblk0: p1 p2
  665. [ 5.695371] mmcblk0: p2 size 7372800 extends beyond EOD, truncated
  666. [ 5.704072] mmcblk0boot1: unknown partition table
  667. [ 5.711179] mmcblk0boot0: unknown partition table
  668. [ 5.717177] [mmc]:mmc_rescan_try_freq:2119 mmc0: eMMC completed
  669. [ 6.181175] usbcore: registered new interface driver snd-usb-audio
  670. [ 6.193258] tegra-i2c tegra-i2c.4: I2c error status 0x00000008
  671. [ 6.201989] tegra-i2c tegra-i2c.4: no acknowledge from address 0xa
  672. [ 6.210965] tegra-i2c tegra-i2c.4: Packet status 0x00010009
  673. [ 6.219393] sgtl5000 4-000a: Failed ensuring sgtl5000 will start with sane register values: -121
  674. [ 6.233622] sgtl5000 4-000a: asoc: failed to probe CODEC sgtl5000.4-000a: -121
  675. [ 6.246455] asoc: failed to instantiate card colibri_t30-sgtl5000: -121
  676. [ 6.256035] tegra-snd-colibri_t30-sgtl5000 tegra-snd-colibri_t30-sgtl5000.0: snd_soc_register_card failed (-19)
  677. [ 6.272196] ALSA device list:
  678. [ 6.278136] #1: HDA NVIDIA Tegra at 0x70038000 irq 113
  679. [ 6.286425] oprofile: hardware counters not available
  680. [ 6.294682] oprofile: using timer interrupt.
  681. [ 6.302026] GACT probability NOT on
  682. [ 6.308320] Mirror/redirect action on
  683. [ 6.314777] u32 classifier
  684. [ 6.320235] Actions configured
  685. [ 6.326398] Netfilter messages via NETLINK v0.30.
  686. [ 6.334054] nf_conntrack version 0.5.0 (15650 buckets, 62600 max)
  687. [ 6.343576] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  688. [ 6.353434] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  689. [ 6.362500] ip_tables: (C) 2000-2006 Netfilter Core Team
  690. [ 6.371114] arp_tables: (C) 2002 David S. Miller
  691. [ 6.378733] TCP cubic registered
  692. [ 6.385012] NET: Registered protocol family 10
  693. [ 6.394353] Mobile IPv6
  694. [ 6.399684] ip6_tables: (C) 2000-2006 Netfilter Core Team
  695. [ 6.408892] NET: Registered protocol family 17
  696. [ 6.416233] NET: Registered protocol family 15
  697. [ 6.423612] Bluetooth: RFCOMM TTY layer initialized
  698. [ 6.431283] Bluetooth: RFCOMM socket layer initialized
  699. [ 6.438895] Bluetooth: RFCOMM ver 1.11
  700. [ 6.445020] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  701. [ 6.452715] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  702. [ 6.461204] 8021q: 802.1Q VLAN Support v1.8
  703. [ 6.467790] Registering the dns_resolver key type
  704. [ 6.474926] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  705. [ 6.487444] Registering SWP/SWPB emulation handler
  706. [ 6.514733] Disabling clocks left on by bootloader:
  707. [ 6.522228] audio_2x
  708. [ 6.527249] audio4_2x
  709. [ 6.532400] audio3_2x
  710. [ 6.537291] audio2_2x
  711. [ 6.542109] audio1_2x
  712. [ 6.546808] audio0_2x
  713. [ 6.551431] audio
  714. [ 6.555580] audio4
  715. [ 6.559744] audio3
  716. [ 6.563898] audio2
  717. [ 6.567968] audio1
  718. [ 6.571950] audio0
  719. [ 6.575856] dsi2-fixed
  720. [ 6.580103] dsi1-fixed
  721. [ 6.584275] uarta
  722. [ 6.587949] i2c3-fast
  723. [ 6.592232] i2c2-fast
  724. [ 6.596182] bsev
  725. [ 6.599635] bsea
  726. [ 6.603020] fuse_burn
  727. [ 6.606796] cclk_lp
  728. [ 6.610275] pll_x_out0
  729. [ 6.613879] pll_p_out2
  730. [ 6.617387] pll_c_out1
  731. [ 6.620862] pll_m_out1
  732. [ 6.624363] CPU rate: 475 MHz
  733. [ 6.628462] tegra_fuse_program_init: no vdd_fuse. fuse write disabled
  734. [ 6.636091] DVFS: Got RTC device name:rtc0
  735. [ 6.641390] tegra_dvfs: vdd_cpu: stats above 1237 mV will be squashed
  736. [ 6.651274] tegra3_dvfs: minimum cap.emc rate 400000000 requires 1000 mV
  737. [ 6.658048] tegra dvfs: tegra sysfs cap interface is initialized
  738. [ 6.668441] tegra_actmon.emc: Completed initialization (0)
  739. [ 6.675748] tegra_actmon.avp: Completed initialization (0)
  740. [ 6.685201] registered taskstats version 1
  741. [ 6.691462] regulator_init_complete: tps6591x_VDD_2: disabling
  742. [ 6.700499] input: gpio-keys as /devices/platform/gpio-keys.0/input/input1
  743. [ 6.709893] tegra_rtc tegra_rtc: setting system clock to 1970-01-01 00:00:11 UTC (11)
  744. [ 6.725994] kjournald starting. Commit interval 5 seconds
  745. [ 6.730183] EXT3-fs (mmcblk0p2): using internal journal
  746. [ 6.730211] EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode
  747. [ 6.746224] VFS: Mounted root (ext3 filesystem) on device 179:2.
  748. [ 6.754357] devtmpfs: mounted
  749. [ 6.758870] EXT3-fs error (device mmcblk0p2): ext3_lookup: deleted inode referenced: 76609
  750. [ 6.931338] EXT3-fs error (device mmcblk0p2): ext3_lookup: deleted inode referenced: 75305
  751. [ 6.945934] EXT3-fs error (device mmcblk0p2): ext3_lookup: deleted inode referenced: 75305
  752. [ 6.960443] EXT3-fs error (device mmcblk0p2): ext3_lookup: deleted inode referenced: 75305
  753. [ 6.975174] EXT3-fs error (device mmcblk0p2): ext3_lookup: deleted inode referenced: 75305
  754. [ 6.989921] EXT3-fs error (device mmcblk0p2): ext3_lookup: deleted inode referenced: 75305
  755. [ 7.004664] EXT3-fs error (device mmcblk0p2): ext3_lookup: deleted inode referenced: 75305
  756. [ 7.028795] EXT3-fs error (device mmcblk0p2): ext3_lookup: deleted inode referenced: 75305
  757. [ 7.048782] EXT3-fs error (device mmcblk0p2): ext3_lookup: deleted inode referenced: 75305
  758. [ 7.068899] EXT3-fs error (device mmcblk0p2): ext3_lookup: deleted inode referenced: 75305
  759. [ 7.088924] EXT3-fs error (device mmcblk0p2): ext3_lookup: deleted inode referenced: 75305
  760. [ 7.109371] EXT3-fs error (device mmcblk0p2): ext3_lookup: deleted inode referenced: 75305
  761. [ 7.129975] EXT3-fs error (device mmcblk0p2): ext3_lookup: deleted inode referenced: 75305
  762. [ 7.150696] EXT3-fs error (device mmcblk0p2): ext3_lookup: deleted inode referenced: 75305
  763. [ 7.171279] EXT3-fs error (device mmcblk0p2): ext3_lookup: deleted inode referenced: 75305
  764. [ 7.191860] EXT3-fs error (device mmcblk0p2): ext3_lookup: deleted inode referenced: 75305
  765. [ 7.212560] EXT3-fs error (device mmcblk0p2): ext3_lookup: deleted inode referenced: 75305
  766. [ 7.233096] EXT3-fs error (device mmcblk0p2): ext3_lookup: deleted inode referenced: 75305
  767. [ 7.253758] EXT3-fs error (device mmcblk0p2): ext3_lookup: deleted inode referenced: 75305
  768. [ 7.274276] EXT3-fs error (device mmcblk0p2): ext3_lookup: deleted inode referenced: 75305
  769. [ 7.294929] EXT3-fs error (device mmcblk0p2): ext3_lookup: deleted inode referenced: 75305
  770. [ 7.315540] EXT3-fs error (device mmcblk0p2): ext3_lookup: deleted inode referenced: 75305
  771. [ 7.336193] EXT3-fs error (device mmcblk0p2): ext3_lookup: deleted inode referenced: 75305
  772. [ 7.356753] EXT3-fs error (device mmcblk0p2): ext3_lookup: deleted inode referenced: 75305
  773. [ 7.377431] EXT3-fs error (device mmcblk0p2): ext3_lookup: deleted inode referenced: 75305
  774. [ 7.398133] EXT3-fs error (device mmcblk0p2): ext3_lookup: deleted inode referenced: 75305
  775. [ 7.418666] EXT3-fs error (device mmcblk0p2): ext3_lookup: deleted inode referenced: 75305
  776. [ 7.439343] EXT3-fs error (device mmcblk0p2): ext3_lookup: deleted inode referenced: 75305
  777. [ 7.460042] EXT3-fs error (device mmcblk0p2): ext3_lookup: deleted inode referenced: 75305
  778. [ 7.480727] EXT3-fs error (device mmcblk0p2): ext3_lookup: deleted inode referenced: 75305
  779. [ 7.501434] EXT3-fs error (device mmcblk0p2): ext3_lookup: deleted inode referenced: 75305
  780. [ 7.521943] EXT3-fs error (device mmcblk0p2): ext3_lookup: deleted inode referenced: 75305
  781. [ 7.542509] EXT3-fs error (device mmcblk0p2): ext3_lookup: deleted inode referenced: 75305
  782. [ 7.567047] EXT3-fs error (device mmcblk0p2): ext3_lookup: deleted inode referenced: 73229
  783. [ 7.589879] EXT3-fs error (device mmcblk0p2): ext3_lookup: deleted inode referenced: 76609
  784. /bin/sh: rw,noatime: No such file or directory
  785. [ 7.630243] Kernel panic - not syncing: Attempted to kill init!
  786. [ 7.640451] [<c00147f0>] (unwind_backtrace+0x0/0xe8) from [<c056e758>] (dump_stack+0x20/0x24)
  787. [ 7.657139] [<c056e758>] (dump_stack+0x20/0x24) from [<c056eb80>] (panic+0x7c/0x194)
  788. [ 7.672820] [<c056eb80>] (panic+0x7c/0x194) from [<c005c7e8>] (do_exit+0x98/0x6c4)
  789. [ 7.688472] [<c005c7e8>] (do_exit+0x98/0x6c4) from [<c005cf20>] (sys_exit_group+0x0/0x20)
  790. [ 7.704595] [<c005cf20>] (sys_exit_group+0x0/0x20) from [<c005cf40>] (__wake_up_parent+0x0/0x30)
  791. [ 7.721372] [<c005cf40>] (__wake_up_parent+0x0/0x30) from [<c000de20>] (ret_fast_syscall+0x0/0x30)
  792. [ 7.738296] CPU0: stopping
  793. [ 7.744964] [<c00147f0>] (unwind_backtrace+0x0/0xe8) from [<c056e758>] (dump_stack+0x20/0x24)
  794. [ 7.761333] [<c056e758>] (dump_stack+0x20/0x24) from [<c00085bc>] (do_IPI+0xf4/0x1a4)
  795. [ 7.776874] [<c00085bc>] (do_IPI+0xf4/0x1a4) from [<c000d978>] (__irq_svc+0x38/0xd0)
  796. [ 7.792425] Exception stack(0xef9ebe60 to 0xef9ebea8)
  797. [ 7.801372] be60: c08bc5e4 68000013 00008715 00000000 c08bc530 00008715 c025a0fc 00000000
  798. [ 7.817238] be80: c08bc5e4 68000013 00008715 ef9ebeb4 ef9ebeb8 ef9ebea8 c005944c c05742f0
  799. [ 7.833029] bea0: 68000013 ffffffff
  800. [ 7.840299] [<c000d978>] (__irq_svc+0x38/0xd0) from [<c05742f0>] (_raw_spin_unlock_irqrestore+0x2c/0x58)
  801. [ 7.857415] [<c05742f0>] (_raw_spin_unlock_irqrestore+0x2c/0x58) from [<c005944c>] (console_unlock+0x194/0x1d0)
  802. [ 7.875152] [<c005944c>] (console_unlock+0x194/0x1d0) from [<c0254cf4>] (fb_flashcursor+0x94/0x12c)
  803. [ 7.891772] [<c0254cf4>] (fb_flashcursor+0x94/0x12c) from [<c0071808>] (process_one_work+0x274/0x438)
  804. [ 7.908654] [<c0071808>] (process_one_work+0x274/0x438) from [<c0071e44>] (worker_thread+0x280/0x3a8)
  805. [ 7.925506] [<c0071e44>] (worker_thread+0x280/0x3a8) from [<c0076958>] (kthread+0xa8/0xb0)
  806. [ 7.941368] [<c0076958>] (kthread+0xa8/0xb0) from [<c000e9c4>] (kernel_thread_exit+0x0/0x8)
  807. [ 7.957430] CPU2: stopping
  808. [ 7.964026] [<c00147f0>] (unwind_backtrace+0x0/0xe8) from [<c056e758>] (dump_stack+0x20/0x24)
  809. [ 7.980214] [<c056e758>] (dump_stack+0x20/0x24) from [<c00085bc>] (do_IPI+0xf4/0x1a4)
  810. [ 7.995574] [<c00085bc>] (do_IPI+0xf4/0x1a4) from [<c000d978>] (__irq_svc+0x38/0xd0)
  811. [ 8.011134] Exception stack(0xef8d7f10 to 0xef8d7f58)
  812. [ 8.020039] 7f00: 00001389 00000000 00000000 000f4240
  813. [ 8.035835] 7f20: a9c7b9b1 00000001 00000000 e6aecc10 8000406a e6aecc00 c08b5c24 ef8d7f84
  814. [ 8.051639] 7f40: 004c4cc0 ef8d7f58 c005df70 c003edac 20000013 ffffffff
  815. [ 8.062146] [<c000d978>] (__irq_svc+0x38/0xd0) from [<c003edac>] (tegra_idle_enter_lp3+0xe4/0xf4)
  816. [ 8.078683] [<c003edac>] (tegra_idle_enter_lp3+0xe4/0xf4) from [<c0388e64>] (cpuidle_idle_call+0x1c4/0x314)
  817. [ 8.096004] [<c0388e64>] (cpuidle_idle_call+0x1c4/0x314) from [<c000ee58>] (cpu_idle+0xc0/0x104)
  818. [ 8.112301] [<c000ee58>] (cpu_idle+0xc0/0x104) from [<c056bd88>] (secondary_start_kernel+0x120/0x140)
  819. [ 8.129034] [<c056bd88>] (secondary_start_kernel+0x120/0x140) from [<8056b6b4>] (0x8056b6b4)
  820. [ 8.144950] CPU3: stopping
  821. [ 8.151380] [<c00147f0>] (unwind_backtrace+0x0/0xe8) from [<c056e758>] (dump_stack+0x20/0x24)
  822. [ 8.167562] [<c056e758>] (dump_stack+0x20/0x24) from [<c00085bc>] (do_IPI+0xf4/0x1a4)
  823. [ 8.182979] [<c00085bc>] (do_IPI+0xf4/0x1a4) from [<c000d978>] (__irq_svc+0x38/0xd0)
  824. [ 8.198278] Exception stack(0xef8e5f10 to 0xef8e5f58)
  825. [ 8.207049] 5f00: 0001ef8e 00000000 00000000 000f4240
  826. [ 8.222727] 5f20: a2844629 00000001 00000000 e6aec810 8000406a e6aec800 c08b5c24 ef8e5f84
  827. [ 8.238586] 5f40: 078fc158 ef8e5f58 c005df70 c003edac 20000013 ffffffff
  828. [ 8.249065] [<c000d978>] (__irq_svc+0x38/0xd0) from [<c003edac>] (tegra_idle_enter_lp3+0xe4/0xf4)
  829. [ 8.265485] [<c003edac>] (tegra_idle_enter_lp3+0xe4/0xf4) from [<c0388e64>] (cpuidle_idle_call+0x1c4/0x314)
  830. [ 8.282804] [<c0388e64>] (cpuidle_idle_call+0x1c4/0x314) from [<c000ee58>] (cpu_idle+0xc0/0x104)
  831. [ 8.299223] [<c000ee58>] (cpu_idle+0xc0/0x104) from [<c056bd88>] (secondary_start_kernel+0x120/0x140)
  832. [ 8.316159] [<c056bd88>] (secondary_start_kernel+0x120/0x140) from [<8056b6b4>] (0x8056b6b4)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!