API tools faq
paste
Advertisement
hay004ero

wzr1750dhpd-r23709c.flash_to_bootlog

hay004ero
Feb 19th, 2020
260
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 17.65 KB | None | 0 0
raw download clone embed print report
  1. BUFFALO CFE Version 1.00 [DDRCLK:333]
  2. decompressing
  3. Decompressing...done
  4. Found a ST compatible (Marconix) serial flash with 16 64KB blocks; total size 1MB
  5. et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.30.163.18 (r377098)
  6.  
  7. DDR clock change and Calibrate... [333->533]
  8.  
  9.  
  10. BUFFALO CFE Version 1.00 [DDRCLK:533]
  11. Memory Test start(0x07E00000) end(0x08000000) size(2097152)
  12. Data line test start:0x07e00000 pattern 0x00000001 0x00000003 0x00000007 0x0000000F 0x00000005 0x00000015 0x00000055 0xAAAAAAAA
  13. Address line test start:0x07e00000 len:0x200000 pattern 0xAAAAAAAA 0x55555555
  14. Fill test patnum:2
  15. fill Pattern 5555AAAA Writing... Reading...
  16. fill Pattern AAAA5555 Writing... Reading...
  17. decompressing
  18. Decompressing...done
  19. Found a ST compatible (Marconix) serial flash with 16 64KB blocks; total size 1MB
  20.  
  21.  
  22. CFE version 6.30.163.18 (r377098) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
  23. Build Date: Fri Jan 18 16:22:36 JST 2013 (root@fc17.localdomain)
  24. Copyright (C) 2000-2008 Broadcom Corporation.
  25.  
  26. Memory Test start(0x00000000) end(0x07E00000) size(132120576)
  27. Data line test start:0x00000000 pattern 0x00000001 0x00000003 0x00000007 0x0000000F 0x00000005 0x00000015 0x00000055 0xAAAAAAAA
  28. Address line test start:0x00000000 len:0x7e00000 pattern 0xAAAAAAAA 0x55555555
  29. Fill test patnum:2
  30. fill Pattern 5555AAAA Writing... Reading...
  31. fill Pattern AAAA5555 Writing... Reading...
  32. Memory Test start(0x88000000) end(0xA0000000) size(402653184)
  33. Data line test start:0x88000000 pattern 0x00000001 0x00000003 0x00000007 0x0000000F 0x00000005 0x00000015 0x00000055 0xAAAAAAAA
  34. Address line test start:0x88000000 len:0x18000000 pattern 0xAAAAAAAA 0x55555555
  35. Fill test patnum:2
  36. fill Pattern 5555AAAA Writing... Reading...
  37. fill Pattern AAAA5555 Writing... Reading...
  38. Init Arena
  39. Init Devs.
  40. Boot partition size = 262144(0x40000)
  41. Found a Esmt NAND flash:
  42. Total size: 128MB
  43. Block size: 128KB
  44. Page Size: 2048B
  45. OOB Size: 64B
  46. Sector size: 512B
  47. Spare size: 16B
  48. ECC level: 8-bit
  49. Device ID: 0x92 0xf1 0x80 0x95 0x40
  50. DDR Clock: 533 MHz
  51. Warning: using legacy sdram_ncdl parameter to set DDR frequency. Equivalent setting in clkfreq=800,*0* will be ignored.
  52. et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.30.163.18 (r377098)
  53. CPU type 0x0: 800MHz
  54. Tot mem: 524288 KBytes
  55.  
  56. CFE mem: 0x07E00000 - 0x07F9A984 (1681796)
  57. Data: 0x07E53480 - 0x07E53948 (1224)
  58. BSS: 0x07E53958 - 0x07E98984 (282668)
  59. Heap: 0x07E98984 - 0x07F98984 (1048576)
  60. Stack: 0x07F98984 - 0x07F9A984 (8192)
  61. Text: 0x07E00000 - 0x07E488F0 (297200)
  62. Boot: 0x07F9B000 - 0x07FDB000
  63. Reloc: I:00000000 - D:00000000
  64.  
  65. Device eth0: hwaddr B2-C7-45-XX-XX-XX, ipaddr 192.168.11.1, mask 255.255.255.0
  66. gateway not set, nameserver not set
  67. Startup canceled
  68. CFE> flash -noheader 192.168.11.2:wzr1750dhpd-v24sp2-23709c.bin nflash1.trx
  69. Reading 192.168.11.2:wzr1750dhpd-v24sp2-23709c.bin: Done. 23490560 bytes read
  70. Programming...done. 23490560 bytes written
  71. *** command status = 0
  72. CFE> nvram erase
  73. *** command status = 0
  74. CFE> reboot
  75.  
  76.  
  77. BUFFALO CFE Version 1.00 [DDRCLK:333]
  78. decompressing
  79. Decompressing...done
  80. Found a ST compatible (Marconix) serial flash with 16 64KB blocks; total size 1MB
  81. Corrupt NVRAM found, trying embedded NVRAM next.
  82.  
  83.  
  84. CFE version 6.30.163.18 (r377098) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
  85. Build Date: Fri Jan 18 16:22:36 JST 2013 (root@fc17.localdomain)
  86. Copyright (C) 2000-2008 Broadcom Corporation.
  87.  
  88. Memory Test start(0x00000000) end(0x07E00000) size(132120576)
  89. Data line test start:0x00000000 pattern 0x00000001 0x00000003 0x00000007 0x0000000F 0x00000005 0x00000015 0x00000055 0xAAAAAAAA
  90. Address line test start:0x00000000 len:0x7e00000 pattern 0xAAAAAAAA 0x55555555
  91. Fill test patnum:2
  92. fill Pattern 5555AAAA Writing... Reading...
  93. fill Pattern AAAA5555 Writing... Reading...
  94. Memory Test start(0x88000000) end(0xA0000000) size(402653184)
  95. Data line test start:0x88000000 pattern 0x00000001 0x00000003 0x00000007 0x0000000F 0x00000005 0x00000015 0x00000055 0xAAAAAAAA
  96. Address line test start:0x88000000 len:0x18000000 pattern 0xAAAAAAAA 0x55555555
  97. Fill test patnum:2
  98. fill Pattern 5555AAAA Writing... Reading...
  99. fill Pattern AAAA5555 Writing... Reading...
  100. Init Arena
  101. Init Devs.
  102. Boot partition size = 262144(0x40000)
  103. Found a Esmt NAND flash:
  104. Total size: 128MB
  105. Block size: 128KB
  106. Page Size: 2048B
  107. OOB Size: 64B
  108. Sector size: 512B
  109. Spare size: 16B
  110. ECC level: 8-bit
  111. Device ID: 0x92 0xf1 0x80 0x95 0x40
  112. DDR Clock: 333 MHz
  113. Warning: using legacy sdram_ncdl parameter to set DDR frequency. Equivalent setting in clkfreq=800,*0* will be ignored.
  114. Warning: invalid DDR setting of 533 MHz ignored. DDR frequency will be set to 333 MHz.
  115. et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.30.163.18 (r377098)
  116. CPU type 0x0: 800MHz
  117. Tot mem: 524288 KBytes
  118.  
  119. CFE mem: 0x07E00000 - 0x07F9A984 (1681796)
  120. Data: 0x07E53480 - 0x07E53948 (1224)
  121. BSS: 0x07E53958 - 0x07E98984 (282668)
  122. Heap: 0x07E98984 - 0x07F98984 (1048576)
  123. Stack: 0x07F98984 - 0x07F9A984 (8192)
  124. Text: 0x07E00000 - 0x07E488F0 (297200)
  125. Boot: 0x07F9B000 - 0x07FDB000
  126. Reloc: I:00000000 - D:00000000
  127.  
  128. initializing nvram...Corrupt NVRAM found, trying embedded NVRAM next.
  129. done
  130. commiting nvram...done
  131. now rebooting
  132.  
  133. BUFFALO CFE Version 1.00 [DDRCLK:333]
  134. decompressing
  135. Decompressing...done
  136. Found a ST compatible (Marconix) serial flash with 16 64KB blocks; total size 1MB
  137. et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.30.163.18 (r377098)
  138.  
  139. DDR clock change and Calibrate... [333->533]
  140.  
  141.  
  142. BUFFALO CFE Version 1.00 [DDRCLK:533]
  143. Memory Test start(0x07E00000) end(0x08000000) size(2097152)
  144. Data line test start:0x07e00000 pattern 0x00000001 0x00000003 0x00000007 0x0000000F 0x00000005 0x00000015 0x00000055 0xAAAAAAAA
  145. Address line test start:0x07e00000 len:0x200000 pattern 0xAAAAAAAA 0x55555555
  146. Fill test patnum:2
  147. fill Pattern 5555AAAA Writing... Reading...
  148. fill Pattern AAAA5555 Writing... Reading...
  149. decompressing
  150. Decompressing...done
  151. Found a ST compatible (Marconix) serial flash with 16 64KB blocks; total size 1MB
  152.  
  153.  
  154. CFE version 6.30.163.18 (r377098) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
  155. Build Date: Fri Jan 18 16:22:36 JST 2013 (root@fc17.localdomain)
  156. Copyright (C) 2000-2008 Broadcom Corporation.
  157.  
  158. Memory Test start(0x00000000) end(0x07E00000) size(132120576)
  159. Data line test start:0x00000000 pattern 0x00000001 0x00000003 0x00000007 0x0000000F 0x00000005 0x00000015 0x00000055 0xAAAAAAAA
  160. Address line test start:0x00000000 len:0x7e00000 pattern 0xAAAAAAAA 0x55555555
  161. Fill test patnum:2
  162. fill Pattern 5555AAAA Writing... Reading...
  163. fill Pattern AAAA5555 Writing... Reading...
  164. Memory Test start(0x88000000) end(0xA0000000) size(402653184)
  165. Data line test start:0x88000000 pattern 0x00000001 0x00000003 0x00000007 0x0000000F 0x00000005 0x00000015 0x00000055 0xAAAAAAAA
  166. Address line test start:0x88000000 len:0x18000000 pattern 0xAAAAAAAA 0x55555555
  167. Fill test patnum:2
  168. fill Pattern 5555AAAA Writing... Reading...
  169. fill Pattern AAAA5555 Writing... Reading...
  170. Init Arena
  171. Init Devs.
  172. Boot partition size = 262144(0x40000)
  173. Found a Esmt NAND flash:
  174. Total size: 128MB
  175. Block size: 128KB
  176. Page Size: 2048B
  177. OOB Size: 64B
  178. Sector size: 512B
  179. Spare size: 16B
  180. ECC level: 8-bit
  181. Device ID: 0x92 0xf1 0x80 0x95 0x40
  182. DDR Clock: 533 MHz
  183. Warning: using legacy sdram_ncdl parameter to set DDR frequency. Equivalent setting in clkfreq=800,*0* will be ignored.
  184. et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.30.163.18 (r377098)
  185. CPU type 0x0: 800MHz
  186. Tot mem: 524288 KBytes
  187.  
  188. CFE mem: 0x07E00000 - 0x07F9A984 (1681796)
  189. Data: 0x07E53480 - 0x07E53948 (1224)
  190. BSS: 0x07E53958 - 0x07E98984 (282668)
  191. Heap: 0x07E98984 - 0x07F98984 (1048576)
  192. Stack: 0x07F98984 - 0x07F9A984 (8192)
  193. Text: 0x07E00000 - 0x07E488F0 (297200)
  194. Boot: 0x07F9B000 - 0x07FDB000
  195. Reloc: I:00000000 - D:00000000
  196.  
  197. Committing NVRAM...done
  198. Device eth0: hwaddr B2-C7-45-XX-XX-XX, ipaddr 192.168.11.1, mask 255.255.255.0
  199. gateway not set, nameserver not set
  200. check_trx: start nflash1.trx
  201. check_trx: exit nflash1.trx
  202. Loader:raw Filesys:raw Dev:nflash0.os File: Options:(null)
  203. Loading: .. 1348552 bytes read
  204. Entry at 0x00008000
  205. Closing network.
  206. Starting program at 0x00008000
  207. Uncompressing Linux... done, booting the kernel.
  208. Booting Linux on physical CPU 0x0
  209. Linux version 3.10.35-rc1 (root@dd-wrt.buildserver) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.01 r39555) ) #2279 SMP Thu Jun 12 06:50:44 CEST 2014
  210. CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7d
  211. CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  212. Machine: Northstar Prototype
  213. Ignoring unrecognised tag 0x00000000
  214. Memory policy: ECC disabled, Data cache writealloc
  215. map io
  216. MPCORE found at 19020000 (VIRT d9020000) 18000000 d8000000
  217. PERCPU: Embedded 7 pages/cpu @c1838000 s7040 r8192 d13440 u32768
  218. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130816
  219. Kernel command line: console=ttyS0,115200 panic=10 root=/dev/mtdblock3 earlyprintk=1 rootfstype=squashfs,jffs2 noinitrd init=/bin/sh
  220. PID hash table entries: 512 (order: -1, 2048 bytes)
  221. Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  222. Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  223. Memory: 128MB 384MB = 512MB total
  224. Memory: 515700k/515700k available, 8588k reserved, 393216K highmem
  225. Virtual kernel memory layout:
  226. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  227. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  228. vmalloc : 0xc8800000 - 0xff000000 ( 872 MB)
  229. lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
  230. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  231. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  232. .text : 0xc0008000 - 0xc034fda4 (3360 kB)
  233. .init : 0xc0350000 - 0xc038ab80 ( 235 kB)
  234. .data : 0xc038c000 - 0xc03c8b48 ( 243 kB)
  235. .bss : 0xc03c8b48 - 0xc0428e64 ( 385 kB)
  236. Hierarchical RCU implementation.
  237. CONFIG_RCU_FANOUT set to non-default value of 2
  238. NR_IRQS:256
  239. MPCORE GIC init
  240. External imprecise Data abort at addr=0x0, fsr=0x1c06 ignored.
  241. MPCORE Global Timer Clock 400000000Hz on IRQ 27
  242. sched_clock: 32 bits at 400MHz, resolution 2ns, wraps every 10737ms
  243. register local timer
  244. smp_twd: clock not found -2
  245. Calibrating delay loop... 1594.16 BogoMIPS (lpj=7970816)
  246. pid_max: default: 32768 minimum: 301
  247. Mount-cache hash table entries: 512
  248. CPU: Testing write buffer coherency: ok
  249. CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  250. Calibrating local timer... 399.76MHz.
  251. 2 cores has been found
  252. Setting up static identity map for 0xc0012660 - 0xc0012694
  253. L310: cache controller enabled 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x7a130000
  254. CPU1: Booted secondary processor
  255. CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  256. Brought up 2 CPUs
  257. SMP: Total of 2 processors activated (3188.32 BogoMIPS).
  258. NET: Registered protocol family 16
  259. DMA: preallocated 256 KiB pool for atomic coherent allocations
  260. Found a ST compatible (Marconix) serial flash with 16 64KB blocks; total size 1MB
  261. found remapped nvram on sflash
  262. CCA UART Clock Config: Sel=1 Ovr=1 Div=48
  263. CCA UART Clock rate 100000000Hz
  264. bio: create slab <bio-0> at 0
  265. Switching to clocksource mpcore_gtimer
  266. NET: Registered protocol family 2
  267. TCP established hash table entries: 1024 (order: 1, 8192 bytes)
  268. TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
  269. TCP: Hash tables configured (established 1024 bind 1024)
  270. TCP: reno registered
  271. UDP hash table entries: 256 (order: 1, 8192 bytes)
  272. UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  273. NET: Registered protocol family 1
  274. init gpio code
  275. Buffalo WZR-1750DHP
  276. PCI: no core
  277. PCI: no core
  278. PCI: scanning bus 0
  279. PCI host bridge to bus 0000:00
  280. pci_bus 0000:00: root bus resource [io 0x0000-0xffffffff]
  281. pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
  282. pci_bus 0000:00: root bus resource [bus 00-ff]
  283. PCI: Fixing up bus 0
  284. PCIE1 link=1
  285. PCIE1 switching to GEN2
  286. PCIE1 link=1
  287. PCI host bridge to bus 0001:00
  288. pci_bus 0001:00: root bus resource [mem 0x08000000-0x0fffffff]
  289. pci_bus 0001:00: No busn resource found for root bus, will use [bus 00-ff]
  290. PCI: Fixing up bus 0
  291. PCI: bus0: Fast back to back transfers disabled
  292. PCI: Fixing up bus 1
  293. PCI: bus1: Fast back to back transfers disabled
  294. pci 0001:00:00.0: BAR 8: assigned [mem 0x08000000-0x080fffff]
  295. pci 0001:01:00.0: BAR 0: assigned [mem 0x08000000-0x08007fff 64bit]
  296. pci 0001:00:00.0: PCI bridge to [bus 01]
  297. pci 0001:00:00.0: bridge window [mem 0x08000000-0x080fffff]
  298. PCIE2 link=1
  299. PCIE2 switching to GEN2
  300. PCIE2 link=1
  301. PCI host bridge to bus 0002:00
  302. pci_bus 0002:00: root bus resource [mem 0x40000000-0x47ffffff]
  303. pci_bus 0002:00: No busn resource found for root bus, will use [bus 00-ff]
  304. PCI: Fixing up bus 0
  305. PCI: bus0: Fast back to back transfers disabled
  306. PCI: Fixing up bus 2
  307. PCI: bus2: Fast back to back transfers disabled
  308. pci 0002:00:00.0: BAR 8: assigned [mem 0x40000000-0x400fffff]
  309. pci 0002:02:00.0: BAR 0: assigned [mem 0x40000000-0x40003fff 64bit]
  310. pci 0002:00:00.0: PCI bridge to [bus 02]
  311. pci 0002:00:00.0: bridge window [mem 0x40000000-0x400fffff]
  312. PCIE3 link=0
  313. Error creating gpio class
  314. squashfs: version 3.0 (2006/03/15) Phillip Lougher
  315. msgmni has been set to 239
  316. alg: No test for stdrng (krng)
  317. io scheduler noop registered (default)
  318. io scheduler cfq registered
  319. Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
  320. serial8250.0: ttyS0 at MMIO 0x18000300 (irq = 117) is a 16550
  321. console [ttyS0] enabled
  322. serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117) is a 16550
  323. brd: module loaded
  324. loop: module loaded
  325. Creating 5 MTD partitions on "bcmsflash":
  326. 0x000000000000-0x000000100000 : "boot"
  327. 0x000000000000-0x0000000f0000 : "linux"
  328. 0x000000100000-0x000000100000 : "rootfs"
  329. mtd: partition "rootfs" is out of reach -- disabled
  330. 0x0000000f0000-0x000000100000 : "nvram_cfe"
  331. 0x0000000e0000-0x0000000f0000 : "nvram"
  332. Found a Esmt NAND flash:
  333. Total size: 128MB
  334. Block size: 128KB
  335. Page Size: 2048B
  336. OOB Size: 64B
  337. Sector size: 512B
  338. Spare size: 16B
  339. ECC level: 8 (8-bit)
  340. Device ID: 0x92 0xf1 0x80 0x95 0x40 0x7f
  341. Creating 1 MTD partitions on "nflash":
  342. 0x000000000000-0x000008000000 : "nand"
  343. tun: Universal TUN/TAP device driver, 1.6
  344. tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  345. PPP generic driver version 2.4.2
  346. PPP BSD Compression module registered
  347. PPP Deflate Compression module registered
  348. PPP MPPE Compression module registered
  349. NET: Registered protocol family 24
  350. GACT probability NOT on
  351. Mirror/redirect action on
  352. Failed to load ipt action
  353. Simple TC action Loaded
  354. netem: version 1.3
  355. u32 classifier
  356. Performance counters on
  357. input device check on
  358. Actions configured
  359. Netfilter messages via NETLINK v0.30.
  360. nf_conntrack version 0.5.0 (8057 buckets, 32228 max)
  361. nf_conntrack_rtsp v0.6.21 loading
  362. xt_time: kernel timezone is -0000
  363. ip_set: protocol 6
  364. gre: GRE over IPv4 demultiplexor driver
  365. nf_nat_rtsp v0.6.21 loading
  366. ip_tables: (C) 2000-2006 Netfilter Core Team
  367. TCP: bic registered
  368. TCP: cubic registered
  369. TCP: westwood registered
  370. TCP: highspeed registered
  371. TCP: hybla registered
  372. TCP: htcp registered
  373. TCP: vegas registered
  374. TCP: veno registered
  375. TCP: scalable registered
  376. TCP: lp registered
  377. TCP: yeah registered
  378. TCP: illinois registered
  379. NET: Registered protocol family 17
  380. Bridge firewalling registered
  381. 8021q: 802.1Q VLAN Support v1.8
  382. found cfe nvram
  383. Key type encrypted registered
  384. Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012
  385. NAND device: Manufacturer ID: 0x92, Chip ID: 0xf1 (Eon NAND 128MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB size: 64
  386. Spare area=64 eccbytes 56, ecc bytes located at:
  387. 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 24 25 26 27 28 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 50 51 52 53 54 55 56 57 58 59 60 61 62 63
  388. Available 7 bytes at (off,len):
  389. (1,1) (16,2) (32,2) (48,2) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0)
  390. Driver must set ecc.strength when using hardware ECC
  391. Scanning device for bad blocks
  392. Options: NO_SUBPAGE_WRITE,
  393. Creating 1 MTD partitions on "brcmnand":
  394. 0x000000000000-0x000008000000 : "ddwrt"
  395. end_request: I/O error, dev mtdblock2, sector 0
  396. SQUASHFS error: sb_bread failed reading block 0x0
  397. VFS: Cannot open root device "1f02" or unknown-block(31,2): error -19
  398. Please append a correct "root=" boot option; here are the available partitions:
  399. 1f00 1024 mtdblock0 (driver?)
  400. 1f01 960 mtdblock1 (driver?)
  401. 1f03 64 mtdblock3 (driver?)
  402. 1f04 64 mtdblock4 (driver?)
  403. 1f05 131072 mtdblock5 (driver?)
  404. 1f06 131072 mtdblock6 (driver?)
  405. Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,2)
  406. CPU1: stopping
  407. CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.10.35-rc1 #2279
  408. Backtrace:
  409. Function entered at [<c0015be0>] from [<c0015ddc>]
  410. r6:00000000 r5:00000001 r4:c0389b60 r3:00000000
  411. Function entered at [<c0015dc4>] from [<c012dfd4>]
  412. Function entered at [<c012dfb0>] from [<c00176b0>]
  413. Function entered at [<c00175d0>] from [<c00086d8>]
  414. r6:c7857f70 r5:c03a0640 r4:f010010c r3:c00137f8
  415. Function entered at [<c0008678>] from [<c0008860>]
  416. Exception stack(0xc7857f70 to 0xc7857fb8)
  417. 7f60: c1840778 00000000 00000b6c 00000000
  418. 7f80: c7856000 c7856000 c03a0470 c02f5c40 c7856000 c03a7b67 c03a7b67 c7857fc4
  419. 7fa0: c7857fc8 c7857fb8 c00137f8 c00137fc 60000113 ffffffff
  420. r7:c7857fa4 r6:ffffffff r5:60000113 r4:c00137fc
  421. Function entered at [<c00137cc>] from [<c005e400>]
  422. Function entered at [<c005e328>] from [<c036c5d8>]
  423. r7:c03c91a8 r3:00000002
  424. Function entered at [<c036c49c>] from [<0036bc40>]
  425. r4:0783806a r3:c036bc28
  426. Rebooting in 10 seconds..
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!