[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.19.105-pcpCore_v7 (pCP@SoundStation) (gcc version 7.4.1 20181213 (crosstool-NG 1.24.0.6-afaf7b9)) #1 SMP Sat Feb 22 00:32:02 EST 2020
[    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 8 MiB at 0x3dc00000
[    0.000000] On node 0 totalpages: 255488
[    0.000000]   Normal zone: 2246 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 255488 pages, LIFO batch:63
[    0.000000] random: get_random_bytes called from start_kernel+0xb0/0x4b4 with crng_init=0
[    0.000000] percpu: Embedded 16 pages/cpu s36748 r8192 d20596 u65536
[    0.000000] pcpu-alloc: s36748 r8192 d20596 u65536 alloc=16*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 253242
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=800 bcm2708_fb.fbheight=480 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:CB:07:5A vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000  host=piCoreLMS tz=GMT0BST,M3.5.0/1,M10.5.0 nodhcp dwc_otg.fiq_fsm_mask=0xF dwc_otg.lpm_enable=0 console=tty1 root=/dev/ram0 elevator=deadline rootwait quiet nortc loglevel=3 noembed smsc95xx.turbo_mode=N noswap consoleblank=0 waitusb=2
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 985284K/1021952K available (8192K kernel code, 626K rwdata, 2184K rodata, 1024K init, 821K bss, 28476K reserved, 8192K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xbe800000 - 0xff800000   (1040 MB)
[    0.000000]     lowmem  : 0x80000000 - 0xbe600000   ( 998 MB)
[    0.000000]     modules : 0x7f000000 - 0x80000000   (  16 MB)
[    0.000000]       .text : 0x(ptrval) - 0x(ptrval)   (9184 kB)
[    0.000000]       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
[    0.000000]       .data : 0x(ptrval) - 0x(ptrval)   ( 627 kB)
[    0.000000]        .bss : 0x(ptrval) - 0x(ptrval)   ( 822 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 26373 entries in 78 pages
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000003] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000008] Switching to timer-based delay loop, resolution 52ns
[    0.000137] Console: colour dummy device 80x30
[    0.000148] console [tty1] enabled
[    0.000174] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000181] pid_max: default: 32768 minimum: 301
[    0.000333] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000343] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000822] CPU: Testing write buffer coherency: ok
[    0.001081] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.001398] Setting up static identity map for 0x100000 - 0x10003c
[    0.001471] rcu: Hierarchical SRCU implementation.
[    0.001852] smp: Bringing up secondary CPUs ...
[    0.002288] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.002749] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.003164] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.003219] smp: Brought up 1 node, 4 CPUs
[    0.003224] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.003227] CPU: All CPU(s) started in HYP mode.
[    0.003229] CPU: Virtualization extensions available.
[    0.003760] devtmpfs: initialized
[    0.009804] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[    0.009915] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.009925] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.010269] pinctrl core: initialized pinctrl subsystem
[    0.010686] NET: Registered protocol family 16
[    0.012279] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.014864] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.014868] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.014979] Serial: AMBA PL011 UART driver
[    0.016107] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.030011] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-02-20 16:44, variant start_cd
[    0.040015] raspberrypi-firmware soc:firmware: Firmware hash is 1614a1ded604d11f395044be137350df84e3d8ee
[    0.064096] bcm2835-dma 3f007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
[    0.064831] SCSI subsystem initialized
[    0.064932] usbcore: registered new interface driver usbfs
[    0.064956] usbcore: registered new interface driver hub
[    0.064999] usbcore: registered new device driver usb
[    0.065822] clocksource: Switched to clocksource arch_sys_counter
[    0.096629] VFS: Disk quotas dquot_6.6.0
[    0.096678] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.096769] FS-Cache: Loaded
[    0.096883] CacheFiles: Loaded
[    0.101079] NET: Registered protocol family 2
[    0.101497] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[    0.101515] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.101563] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.101643] TCP: Hash tables configured (established 8192 bind 8192)
[    0.101717] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.101739] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.101850] NET: Registered protocol family 1
[    0.102159] RPC: Registered named UNIX socket transport module.
[    0.102162] RPC: Registered udp transport module.
[    0.102165] RPC: Registered tcp transport module.
[    0.102167] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.102283] Trying to unpack rootfs image as initramfs...
[    0.272922] Freeing initrd memory: 4544K
[    0.276114] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[    0.277567] Initialise system trusted keyrings
[    0.277684] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    0.281903] FS-Cache: Netfs 'nfs' registered for caching
[    0.282193] NFS: Registering the id_resolver key type
[    0.282213] Key type id_resolver registered
[    0.282215] Key type id_legacy registered
[    0.282223] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.282933] Key type asymmetric registered
[    0.282938] Asymmetric key parser 'x509' registered
[    0.282961] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.283035] io scheduler noop registered
[    0.283039] io scheduler deadline registered (default)
[    0.283122] io scheduler cfq registered
[    0.283125] io scheduler mq-deadline registered (default)
[    0.283128] io scheduler kyber registered
[    0.284226] bcm2708_fb soc:fb: FB found 1 display(s)
[    0.288433] Console: switching to colour frame buffer device 100x30
[    0.290045] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 800x480
[    0.290561] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[    0.291212] bcm2835-rng 3f104000.rng: hwrng registered
[    0.291359] vc-mem: phys_addr:0x00000000 mem_base=0x3f000000 mem_size:0x3f600000(1014 MiB)
[    0.291585] vc-sm: Videocore shared memory driver
[    0.291733] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[    0.296609] brd: module loaded
[    0.301404] loop: module loaded
[    0.301718] Loading iSCSI transport class v2.0-870.
[    0.302082] libphy: Fixed MDIO Bus: probed
[    0.302133] usbcore: registered new interface driver lan78xx
[    0.302157] usbcore: registered new interface driver smsc95xx
[    0.302165] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    0.329841] dwc_otg 3f980000.usb: base=(ptrval)
[    0.529952] Core Release: 2.80a
[    0.529956] Setting default values for core params
[    0.529971] Finished setting default values for core params
[    0.730106] Using Buffer DMA mode
[    0.730109] Periodic Transfer Interrupt Enhancement - disabled
[    0.730112] Multiprocessor Interrupt Enhancement - disabled
[    0.730115] OTG VER PARAM: 0, OTG VER FLAG: 0
[    0.730140] Dedicated Tx FIFOs mode
[    0.730380] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = bdd14000 dma = 0xfdd14000 len=9024
[    0.730394] FIQ FSM acceleration enabled for :
[    0.730394] Non-periodic Split Transactions
[    0.730394] Periodic Split Transactions
[    0.730394] High-Speed Isochronous Endpoints
[    0.730394] Interrupt/Control Split Transaction hack enabled
[    0.730397] dwc_otg: Microframe scheduler enabled
[    0.730424] WARN::hcd_init_fiq:457: FIQ on core 1
[    0.730428] WARN::hcd_init_fiq:458: FIQ ASM at 80635a1c length 36
[    0.730434] WARN::hcd_init_fiq:497: MPHI regs_base at be810000
[    0.730443] dwc_otg 3f980000.usb: DWC OTG Controller
[    0.730459] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    0.730476] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000
[    0.730511] Init: Port Power? op_state=1
[    0.730513] Init: Power Port (0)
[    0.730633] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    0.730638] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.730642] usb usb1: Product: DWC OTG Controller
[    0.730646] usb usb1: Manufacturer: Linux 4.19.105-pcpCore_v7 dwc_otg_hcd
[    0.730650] usb usb1: SerialNumber: 3f980000.usb
[    0.730939] hub 1-0:1.0: USB hub found
[    0.730959] hub 1-0:1.0: 1 port detected
[    0.731227] dwc_otg: FIQ enabled
[    0.731230] dwc_otg: NAK holdoff enabled
[    0.731233] dwc_otg: FIQ split-transaction FSM enabled
[    0.731238] Module dwc_common_port init
[    0.731380] usbcore: registered new interface driver usb-storage
[    0.731464] mousedev: PS/2 mouse device common for all mice
[    0.731887] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    0.732000] bcm2835-cpufreq: min=600000 max=1400000
[    0.733082] sdhci: Secure Digital Host Controller Interface driver
[    0.733084] sdhci: Copyright(c) Pierre Ossman
[    0.733273] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe
[    0.733453] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[    0.733511] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.734602] ledtrig-cpu: registered to indicate activity on CPUs
[    0.734672] hidraw: raw HID events driver (C) Jiri Kosina
[    0.734761] usbcore: registered new interface driver usbhid
[    0.734763] usbhid: USB HID core driver
[    0.735171] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
[    0.736093] [vc_sm_connected_init]: start
[    0.738809] vc_vchi_sm_init: failed to open VCHI service (-1)
[    0.738812] [vc_sm_connected_init]: failed to initialize shared memory service
[    0.738816] [vc_sm_connected_init]: end - returning -1
[    0.739386] Initializing XFRM netlink socket
[    0.739398] NET: Registered protocol family 17
[    0.739462] Key type dns_resolver registered
[    0.739752] Registering SWP/SWPB emulation handler
[    0.740045] registered taskstats version 1
[    0.740054] Loading compiled-in X.509 certificates
[    0.743255] uart-pl011 3f201000.serial: cts_event_workaround enabled
[    0.743300] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2
[    0.744195] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
[    0.744199] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
[    0.768764] sdhost: log_buf @ (ptrval) (fdd13000)
[    0.805648] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    0.807152] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    0.808655] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    0.811357] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    0.816492] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    0.817087] of_cfs_init
[    0.817148] of_cfs_init: OK
[    0.839730] Freeing unused kernel memory: 1024K
[    0.873385] mmc0: host does not support reading read-only switch, assuming write-enable
[    0.876015] Run /init as init process
[    0.876068] mmc0: new high speed SDHC card at address 0001
[    0.876871] mmcblk0: mmc0:0001 EB1QT 29.8 GiB
[    0.878551]  mmcblk0: p1 p2
[    0.882681] random: fast init done
[    0.890523] mmc1: new high speed SDIO card at address 0001
[    0.945989] Indeed it is in host mode hprt0 = 00021501
[    1.155891] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    1.156047] Indeed it is in host mode hprt0 = 00001101
[    1.405980] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[    1.405986] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.406352] hub 1-1:1.0: USB hub found
[    1.406399] hub 1-1:1.0: 4 ports detected
[    1.725836] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    1.855962] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[    1.855967] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.856285] hub 1-1.1:1.0: USB hub found
[    1.856340] hub 1-1.1:1.0: 3 ports detected
[    2.208876] dwc_otg_handle_wakeup_detected_intr lxstate = 2
[    2.585832] usb 1-1.1.1: new high-speed USB device number 4 using dwc_otg
[    2.716033] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800, bcdDevice= 3.00
[    2.716038] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.979099] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed
[    2.979606] libphy: lan78xx-mdiobus: probed
[    2.984237] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): int urb period 64
[    3.228507] zram: Added device: zram0
[    3.242222] zram0: detected capacity change from 0 to 245452800
[    3.245192] random: mkswap: uninitialized urandom read (16 bytes read)
[    3.248069] Adding 239696k swap on /dev/zram0.  Priority:-2 extents:1 across:239696k SSFS
[    3.323164] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    3.822167] EXT4-fs (mmcblk0p2): recovery complete
[    3.831315] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    3.892016] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    8.022853] rpi-ft5406 rpi_ft5406: Probing device
[    8.028511] input: FT5406 memory based driver as /devices/virtual/input/input0
[    8.094389] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[    8.104600] bcm2835_audio soc:audio: card created with 8 channels
[    8.114179] snd-rpi-justboom-dac soc:sound: ASoC: CPU DAI (null) not registered - will retry
[    8.115084] snd-rpi-justboom-dac soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered - will retry
[    8.179499] snd-rpi-justboom-dac soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered - will retry
[    8.183409] snd-rpi-justboom-dac soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered - will retry
[    8.190950] pcm512x 1-004d: Linked as a consumer to regulator.1
[    8.204264] snd-rpi-justboom-dac soc:sound: pcm512x-hifi <-> 3f203000.i2s mapping ok
[    8.484472] Starting piCorePlayer v6.0.0 startup.
[    9.470129] random: sshd: uninitialized urandom read (32 bytes read)
[    9.630375] FS-Cache: Netfs 'cifs' registered for caching
[    9.630670] Key type cifs.spnego registered
[    9.630684] Key type cifs.idmap registered
[    9.631845] No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount.
[   10.994548] random: slimserver.pl: uninitialized urandom read (4 bytes read)
[   13.261388] random: slimserver.pl: uninitialized urandom read (4 bytes read)
[   13.679058] random: slimserver.pl: uninitialized urandom read (64 bytes read)
[   15.850234] random: slimserver.pl: uninitialized urandom read (4 bytes read)
[   20.185168] random: squeeze2cast-ar: uninitialized urandom read (32 bytes read)
[   20.772640] random: crng init done
[   25.991105] pcm512x 1-004d: No SCLK, using BCLK: -2
[   26.015915] pcm512x 1-004d: No SCLK, using BCLK: -2
[   26.127114] Finished piCorePlayer v6.0.0 startup.
[   68.461899] pcm512x 1-004d: No SCLK, using BCLK: -2