API tools faq
paste
YorkLTx

Pulsar's brakes & tires

YorkLTx
Mar 11th, 2021
27
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 13.54 KB | None | 0 0
raw download clone embed print report
  1. [2021-03-11 22:41:29] [Output] : ★ Han Tonio walks towards the rear of the car, sliding the key into the lock on the trunk, as he would-
  2. [2021-03-11 22:41:52] [Output] : ★ twist it counter-clockwise, upon lifting the trunk latch to reveal the set of cardboard- ((Han Tonio))
  3. [2021-03-11 22:42:14] [Output] : ★ boxes with the parts, stored all over the car; rear seats folded down. ((Han Tonio))
  4. [2021-03-11 22:42:41] [Output] : ★ Han Tonio takes a grasp for the new Volk rays wheels, admiring them for a second, as he would-
  5. [2021-03-11 22:43:03] [Output] : ★ start unwrapping of them with a pocket knife, upon laying it on the workbench. ((Han Tonio))
  6. [2021-03-11 22:43:24] [Output] : ★ then proceeds to head back to the trunk, slipping out a single Toyo Proxxes tire, upon- ((Han Tonio))
  7. [2021-03-11 22:43:32] [Output] : ★ carrying it to the tire mounting machine. ((Han Tonio))
  8. [2021-03-11 22:43:53] [Output] : ★ Han Tonio lays it by the floor, as he would mount the rim onto the machine, lubbing it with a-
  9. [2021-03-11 22:44:03] [Output] : ★ solution combined for the purpose. ((Han Tonio))
  10. [2021-03-11 22:44:26] [Output] : ★ Han Tonio applies it onto the tire aswell, as he would then slip the roudn rubber piece onto the rim.
  11. [2021-03-11 22:44:45] [Output] : ★ Han Tonio applies pressure onto the tire, as he would press the pedal on the machine, making it rotate
  12. [2021-03-11 22:45:22] [Output] : ★ As he would succeed to mount one end of the tire onto the rim, he would then take the wheel- ((Han Tonio))
  13. [2021-03-11 22:45:37] [Output] : ★ back from the machine's grips, rotating it 180 degrees to mount the other side of the tire. ((Han Tonio))
  14. [2021-03-11 22:45:58] [Output] : ★ Han Tonio applies pressure onto the rubber, as he would make the machine rotate, to fit the tire-
  15. [2021-03-11 22:46:00] [Output] : ★ onto the rim. ((Han Tonio))
  16. [2021-03-11 22:46:43] [Output] : ★ Han Tonio then pops out the set, laying it onto the floor, as he would grasp a can of tire fitting-
  17. [2021-03-11 22:46:51] [Output] : ★ spray, applying it to both sides. ((Han Tonio))
  18. [2021-03-11 22:47:33] [Output] : ★ Han Tonio then takes ahold of a torch gun from the shelf, lowering it onto the tire until it shrunk-
  19. [2021-03-11 22:47:40] [Output] : ★ into place with a loud *BANG*. ((Han Tonio))
  20. [2021-03-11 22:47:59] [Output] : ★ With the wheel prepped, he would roll it towards the front right side of the car, laying it- ((Han Tonio))
  21. [2021-03-11 22:48:04] [Output] : ★ by the cement floor. ((Han Tonio))
  22. [2021-03-11 22:48:20] [Output] : ★ Han Tonio quickly reaches for the lift remote, lifting the car in the air by about waist level.
  23. [2021-03-11 22:48:40] [Output] : ★ Han Tonio takes ahold of the pressure gun on the floor, as he would lay it onto one of the nuts on-
  24. [2021-03-11 22:48:43] [Output] : ★ the car's rim. ((Han Tonio))
  25. [2021-03-11 22:49:10] [Output] : ★ Han Tonio presses the button on the gun, realizing it's set to tighten, as he would flick the switch-
  26. [2021-03-11 22:49:27] [Output] : ★ to the other side, making it untighten the nut, successfully. ((Han Tonio))
  27. [2021-03-11 22:49:40] [Output] : ★ Han Tonio repeats for the reminaing three, as he would keep them in a pocket in his jumper.
  28. [2021-03-11 22:50:53] [Output] : ★ Han Tonio tries to wiggle the wheel outwards, failing, as he would then try for a more practical-
  29. [2021-03-11 22:50:56] [Output] : ★ approach. ((Han Tonio))
  30. [2021-03-11 22:51:16] [Output] : ★ Han Tonio raises his leg back, kicking the wheel on the top, as it would then fall off the car,
  31. [2021-03-11 22:51:21] [Output] : ★ smashing onto the ground. ((Han Tonio))
  32. [2021-03-11 22:51:48] [Output] : ★ Han Tonio kicks the old rim and tire away, as he would then center his attention in the braking system
  33. [2021-03-11 22:52:04] [Output] : ★ Han Tonio reaches for a can of WD40 in the shelf, spraying through all the nuts and bolts in the-
  34. [2021-03-11 22:52:21] [Output] : ★ caliper and brake disk, letting it sit for a few minutes while he would mount the rest- ((Han Tonio))
  35. [2021-03-11 22:52:39] [Output] : ★ of the new Volk Rays rims and tires. ((Han Tonio))
  36. [2021-03-11 22:53:03] [Output] : ★ Han Tonio gets back to the car with a few more tools, laying them flat on the ground, as he would-
  37. [2021-03-11 22:53:13] [Output] : ★ for a wrench, sliding it behind the caliper. ((Han Tonio))
  38. [2021-03-11 22:53:31] [Output] : ★ mounts it on one of the nuts, twisting it counter-clockwise fairly easily, with the help- ((Han Tonio))
  39. [2021-03-11 22:53:34] [Output] : ★ of the miraculous spray. ((Han Tonio))
  40. [2021-03-11 22:53:57] [Output] : ★ Han Tonio untightens the whole caliper, sliding it out and leaving it hanging by the brake line.
  41. [2021-03-11 22:54:18] [Output] : ★ Han Tonio slides a cardboard piece under the working space, as he would loosen the brake-
  42. [2021-03-11 22:54:28] [Output] : ★ line from the caliper, letting it drip the oil. ((Han Tonio))
  43. [2021-03-11 22:54:48] [Output] : ★ would then quickly grasp the brake pads, storing them away, as they were very worn out. ((Han Tonio))
  44. [2021-03-11 22:55:44] [Output] : ★ Han Tonio grasps a phillips screwdriver, sliding it onto the screw in the brake disk, loosening it up-
  45. [2021-03-11 22:56:02] [Output] : ★ upon sliding out the brake disk with some struggling, hitting it a few times with a hammer- ((Han Tonio))
  46. [2021-03-11 22:56:06] [Output] : ★ until it popped out. ((Han Tonio))
  47. [2021-03-11 22:56:23] [Output] : ★ Han Tonio then stands back up, heading for the trunk and taking a look at the new set of brakes,
  48. [2021-03-11 22:56:37] [Output] : ★ taking one for the front and taking it to where he previously was. ((Han Tonio))
  49. [2021-03-11 22:56:56] [Output] : ★ Han Tonio inspects the new brake disk, as he would carefully slide it onto the hub, checking for-
  50. [2021-03-11 22:57:25] [Output] : ★ fitment, where it would fit quite well, being a purpose made set for the car. ((Han Tonio))
  51. [2021-03-11 22:58:13] [Output] : ★ Han Tonio tightens it up with the screw driver, securing it in place.
  52. [2021-03-11 22:58:31] [Output] : ★ Han Tonio then grabs the new caliper housing, sliding it onto the disk and tightening it in place.
  53. [2021-03-11 22:59:12] [Output] : ★ Han Tonio would then unwrap the new medium track-oriented pads, as he would try to mount them-
  54. [2021-03-11 22:59:17] [Output] : ★ onto the car already on the car. ((Han Tonio))
  55. [2021-03-11 22:59:42] [Output] : ★ Han Tonio slots them in place securely, upon reaching for the new big-profile 6 piston caliper.
  56. [2021-03-11 23:00:02] [Output] : ★ Han Tonio slots it onto the disk, upon sliding a couple of nuts onto the back of it, and reaches for-
  57. [2021-03-11 23:00:05] [Output] : ★ the torque wrench. ((Han Tonio))
  58. [2021-03-11 23:00:25] [Output] : ★ Han Tonio slides through his phone to find the torque specs for the car, grabbing the one for the-
  59. [2021-03-11 23:00:28] [Output] : ★ brake caliper. ((Han Tonio))
  60. [2021-03-11 23:00:44] [Output] : ★ Han Tonio inserts it onto a torque wrench, as he would then tighten it in place.
  61. [2021-03-11 23:01:01] [Output] : ★ With all of the system secured, all there was left to do was to fit the brake line, ((Han Tonio))
  62. [2021-03-11 23:01:19] [Output] : ★ which Han would then proceed to do, slotting it onto the caliper, with tightening up- ((Han Tonio))
  63. [2021-03-11 23:01:25] [Output] : ★ the end with a wrench. ((Han Tonio))
  64. [2021-03-11 23:02:17] [Output] : [Local OOC] (5) Han Tonio: and tightening*
  65. [2021-03-11 23:02:42] [Output] : ★ Han Tonio would then lift himself up, stretching his back, as he would reach for the new set-
  66. [2021-03-11 23:02:57] [Output] : ★ of rims on the ground, mounted on the semi-slick tires. ((Han Tonio))
  67. [2021-03-11 23:03:12] [Output] : ★ Han Tonio lifts them onto the hub, as he would secure it with his left hand, as he would grasp the-
  68. [2021-03-11 23:03:21] [Output] : ★ nuts with his right, and sliding these onto the studs. ((Han Tonio))
  69. [2021-03-11 23:03:37] [Output] : ★ Han Tonio quickly hand tightens them, as he would then set the torque wrench to 11 kilograms.
  70. [2021-03-11 23:04:05] [Output] : ★ Han Tonio twists the nuts until the *click* *click* sounds, proceeding to do so twice,
  71. [2021-03-11 23:04:13] [Output] : ★ to double-check the spec. ((Han Tonio))
  72. [2021-03-11 23:04:45] [Output] : ★ As the front right wheel would be successefully assembled, Han would then move to the back- ((Han Tonio))
  73. [2021-03-11 23:05:02] [Output] : ★ of the car, along with his tools, where he out meet the already prepped new wheel, ((Han Tonio))
  74. [2021-03-11 23:05:10] [Output] : ★ laying by the floor where he had previously put it. ((Han Tonio))
  75. [2021-03-11 23:05:30] [Output] : ★ Han Tonio proceeds to untighten the nuts on the car with the air gun, lowering these onto his-
  76. [2021-03-11 23:05:32] [Output] : ★ pocket. ((Han Tonio))
  77. [2021-03-11 23:06:59] [Output] : ★ Han Tonio takes ahold of the wheel set, as it would the pull it out quite easily this time, as he-
  78. [2021-03-11 23:07:11] [Output] : ★ would lay onto the lift post behind him. ((Han Tonio))
  79. [2021-03-11 23:07:43] [Output] : ★ Han Tonio reaches back for the car, where he would be presented with the quite simple-
  80. [2021-03-11 23:07:59] [Output] : ★ braking system on the back of the Pulsar; disk from factory. ((Han Tonio))
  81. [2021-03-11 23:08:18] [Output] : ★ Han Tonio would find the job on the back as easy as the front, as he would grasp for the wrench,
  82. [2021-03-11 23:08:27] [Output] : ★ as he would start to untighten the nuts on the caliper. ((Han Tonio))
  83. [2021-03-11 23:08:44] [Output] : ★ Han Tonio quickly does so with the help of the WD40 spray, pulling both the nuts out.
  84. [2021-03-11 23:09:02] [Output] : ★ Han Tonio slides the caliper out the disk aswell, upon loosening the brake line, spryaing the-
  85. [2021-03-11 23:09:34] [Output] : ★ oil all over the floor, realizing he forgot to get something to absorb the oil. ((Han Tonio))
  86. [2021-03-11 23:09:43] [Output] : [Portuguese] Han Tonio says: Ah fuck's sake not again...
  87. [2021-03-11 23:10:08] [Output] : ★ Ignoring it, Han would proceed to slide out the worn out pads from the disk, attempting to- ((Han Tonio))
  88. [2021-03-11 23:10:29] [Output] : ★ basket them from a distance, failing misearably, as it would end up slicing a bit of paint- ((Han Tonio))
  89. [2021-03-11 23:10:41] [Output] : ★ from a customer car sitting by the trash bin. ((Han Tonio))
  90. [2021-03-11 23:11:03] [Output] : ★ Han Tonio would purposely look away, pretending nothing happening, upon moving on with his work.
  91. [2021-03-11 23:11:38] [Output] : ★ Han Tonio would then pull out the brake disk with some effort, untightening it with the screwdriver,
  92. [2021-03-11 23:11:51] [Output] : ★ and, as always, a generous amount of WD-40 squirts. ((Han Tonio))
  93. [2021-03-11 23:12:08] [Output] : ★ Han Tonio then quickly cleans with the area with a hard brush, just to ease his work when fitting-
  94. [2021-03-11 23:12:11] [Output] : ★ in the new parts. ((Han Tonio))
  95. [2021-03-11 23:12:39] [Output] : ★ Which he would do right after, starting with the new disk; slides it on the car, ((Han Tonio))
  96. [2021-03-11 23:12:46] [Output] : ★ securing it with the screw driver. ((Han Tonio))
  97. [2021-03-11 23:13:04] [Output] : ★ Han Tonio then proceeds to mount up the caliper bracket, as he would fit the new pads onto this-
  98. [2021-03-11 23:13:08] [Output] : ★ piece. ((Han Tonio))
  99. [2021-03-11 23:13:28] [Output] : ★ wiggles them in place, then taking ahold of the 4 piston caliper for the rear. ((Han Tonio))
  100. [2021-03-11 23:13:50] [Output] : ★ Han Tonio mounts the brake line onto it, without fully tightening, which he would do after he had-
  101. [2021-03-11 23:13:56] [Output] : ★ slid the caliper onto the bracket. ((Han Tonio))
  102. [2021-03-11 23:14:12] [Output] : ★ Han Tonio secures it with the two nuts on the caliper, then tightening the brake line connector.
  103. [2021-03-11 23:14:30] [Output] : ★ With the brake line now complete on the right side of the car, Han would then reach- ((Han Tonio))
  104. [2021-03-11 23:14:53] [Output] : ★ for the new wheels on the ground, sliding it onto the studs, securing it with the nuts. ((Han Tonio))
  105. [2021-03-11 23:15:11] [Output] : ★ Han Tonio sets the torque wrench back to 11 kilograms, as he would tighten the nuts following a-
  106. [2021-03-11 23:15:28] [Output] : ★ a star pattern, always moving to the nuts 180 degress away from the last one, ensuring- ((Han Tonio))
  107. [2021-03-11 23:15:34] [Output] : ★ even pressure throughout. ((Han Tonio))
  108. [2021-03-11 23:15:48] [Output] : ★ With the wheel installed, Han would repeat the process on the other side of the car, ((Han Tonio))
  109. [2021-03-11 23:15:59] [Output] : ★ completing the brake system and tires makeover on the car. ((Han Tonio))
  110. [2021-03-11 23:16:20] [Output] : ★ Han Tonio slides onto the driver's seat and, with the help of a mechanic crouching by the-
  111. [2021-03-11 23:16:34] [Output] : ★ front left wheel of the car, they would bleed the brake systems, with Han- ((Han Tonio))
  112. [2021-03-11 23:17:00] [Output] : ★ simultaniously pressing the brake pedal, as the mechanic would eventually top-up the- ((Han Tonio))
  113. [2021-03-11 23:17:20] [Output] : ★ brake fluid container on the engine bay, with DOT 3 liquid. ((Han Tonio))
  114. [2021-03-11 23:17:27] [Output] : [Portuguese] Han Tonio says: Alright, that's that, time for a test drive!
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!