API tools faq
paste
Advertisement
juanjosepablos

dmesg Zyxel P870HNU-51b 5/05/2020

juanjosepablos
May 4th, 2020
34
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 12.00 KB | None | 0 0
raw download clone embed print report
  1. root@OpenWrt:~# dmesg
  2. [ 0.000000] Linux version 5.4.36 (cheche@casa) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r13138-3a79e3b185)) #0 SMP Sun May 3 17:31:30 2020
  3. [ 0.000000] Detected Broadcom 0x6368 CPU revision b2
  4. [ 0.000000] CPU frequency is 400 MHz
  5. [ 0.000000] 64MB of RAM installed
  6. [ 0.000000] board_bcm963xx: Boot address 0xb8000000
  7. [ 0.000000] board_bcm963xx: CFE version: 1.0.37-107.23
  8. [ 0.000000] printk: bootconsole [early0] enabled
  9. [ 0.000000] CPU0 revision is: 0002a031 (Broadcom BMIPS4350)
  10. [ 0.000000] board: board name: P870HNU-51b
  11. [ 0.000000] MIPS: machine is Zyxel P870HNU-51b
  12. [ 0.000000] Initrd not found or empty - disabling initrd
  13. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
  14. [ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
  15. [ 0.000000] Zone ranges:
  16. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
  17. [ 0.000000] Movable zone start for each node
  18. [ 0.000000] Early memory node ranges
  19. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
  20. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
  21. [ 0.000000] On node 0 totalpages: 16384
  22. [ 0.000000] Normal zone: 144 pages used for memmap
  23. [ 0.000000] Normal zone: 0 pages reserved
  24. [ 0.000000] Normal zone: 16384 pages, LIFO batch:3
  25. [ 0.000000] percpu: Embedded 14 pages/cpu s26032 r8192 d23120 u57344
  26. [ 0.000000] pcpu-alloc: s26032 r8192 d23120 u57344 alloc=14*4096
  27. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  28. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16240
  29. [ 0.000000] Kernel command line: rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
  30. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
  31. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
  32. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  33. [ 0.000000] Memory: 56880K/65536K available (5061K kernel code, 203K rwdata, 1112K rodata, 1296K init, 201K bss, 8656K reserved, 0K cma-reserved)
  34. [ 0.000000] SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  35. [ 0.000000] rcu: Hierarchical RCU implementation.
  36. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  37. [ 0.000000] NR_IRQS: 256
  38. [ 0.000000] genirq: irq_chip bcm6345-periph-intc did not update eff. affinity mask of irq 28
  39. [ 0.000000] random: get_random_bytes called from start_kernel+0x338/0x568 with crng_init=0
  40. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
  41. [ 0.000014] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
  42. [ 0.008139] Calibrating delay loop... 397.82 BogoMIPS (lpj=795648)
  43. [ 0.046462] pid_max: default: 32768 minimum: 301
  44. [ 0.051550] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  45. [ 0.059092] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  46. [ 0.072184] rcu: Hierarchical SRCU implementation.
  47. [ 0.078375] smp: Bringing up secondary CPUs ...
  48. [ 0.084676] SMP: Booting CPU1...
  49. [ 3.395235] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
  50. [ 3.395252] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
  51. [ 3.395509] CPU1 revision is: 0002a031 (Broadcom BMIPS4350)
  52. [ 0.116161] Synchronize counters for CPU 1:
  53. [ 0.116180] SMP: CPU1 is running
  54. [ 0.116202] done.
  55. [ 0.146710] smp: Brought up 1 node, 2 CPUs
  56. [ 0.159105] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  57. [ 0.169132] futex hash table entries: 512 (order: 1, 8192 bytes, linear)
  58. [ 0.176405] pinctrl core: initialized pinctrl subsystem
  59. [ 0.182814] NET: Registered protocol family 16
  60. [ 0.208783] registering PCI controller with io_map_base unset
  61. [ 0.261796] PCI host bridge to bus 0000:00
  62. [ 0.266061] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
  63. [ 0.273161] pci_bus 0000:00: root bus resource [io 0x8000000-0x800ffff]
  64. [ 0.280038] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
  65. [ 0.287014] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  66. [ 0.295322] pci 0000:00:01.0: [14e4:a8d6] type 00 class 0x028000
  67. [ 0.303526] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x00003fff]
  68. [ 0.317770] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
  69. [ 0.324601] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x30003fff]
  70. [ 0.335792] clocksource: Switched to clocksource MIPS
  71. [ 0.343628] b43-pci-bridge 0000:00:01.0: enabling device (0000 -> 0002)
  72. [ 0.380434] ssb: Found chip with id 0xA8D6, rev 0x00 and package 0x08
  73. [ 0.461513] b43-pci-bridge 0000:00:01.0: Sonics Silicon Backplane found on PCI device 0000:00:01.0
  74. [ 0.471997] NET: Registered protocol family 2
  75. [ 0.477923] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
  76. [ 0.486650] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
  77. [ 0.494574] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
  78. [ 0.501897] TCP: Hash tables configured (established 1024 bind 1024)
  79. [ 0.508390] random: fast init done
  80. [ 0.512371] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
  81. [ 0.519214] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
  82. [ 0.527023] NET: Registered protocol family 1
  83. [ 0.531611] PCI: CLS 0 bytes, default 16
  84. [ 0.539148] workingset: timestamp_bits=14 max_order=14 bucket_order=0
  85. [ 0.571724] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  86. [ 0.577821] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  87. [ 0.597011] bcm6368-pinctrl 10000080.pin-controller: registered at mmio (ptrval)
  88. [ 0.606651] 10000100.serial: ttyS0 at MMIO 0x10000100 (irq = 10, base_baud = 1562500) is a bcm63xx_uart
  89. [ 0.616417] printk: console [ttyS0] enabled
  90. [ 0.624994] printk: bootconsole [early0] disabled
  91. [ 0.638290] physmap-flash 18000000.nor: physmap platform flash device: [mem 0x18000000-0x19ffffff]
  92. [ 0.647779] 18000000.nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x00227e
  93. [ 0.658115] 18000000.nor: Found an alias at 0x1000000 for the chip at 0x0
  94. [ 0.658144] Amd/Fujitsu Extended Query Table at 0x0040
  95. [ 0.663436] Amd/Fujitsu Extended Query version 1.3.
  96. [ 0.668604] number of CFI chips: 1
  97. [ 0.672823] Searching for RedBoot partition table in 18000000.nor at offset 0xfe0000
  98. [ 0.714941] No RedBoot partition table detected in 18000000.nor
  99. [ 0.721272] 3 fixed-partitions partitions found on MTD device 18000000.nor
  100. [ 0.728338] Creating 3 MTD partitions on "18000000.nor":
  101. [ 0.733795] 0x000000000000-0x000000020000 : "CFE"
  102. [ 0.741801] 0x000000020000-0x000001000000 : "linux"
  103. [ 0.749990] parser_imagetag: rootfs: CFE image tag found at 0x0 with version 6, board type 96368MVWG
  104. [ 0.759440] parser_imagetag: Partition 0 is kernel offset 100 and length 203990
  105. [ 0.766946] parser_imagetag: Partition 1 is rootfs offset 203a90 and length ddc570
  106. [ 0.774717] parser_imagetag: Spare partition is offset 430004 and length bafffc
  107. [ 0.782335] 2 bcm963xx-imagetag partitions found on MTD device linux
  108. [ 0.788854] Creating 2 MTD partitions on "linux":
  109. [ 0.793691] 0x000000000100-0x000000203a90 : "kernel"
  110. [ 0.801660] 0x000000203a90-0x000000fe0000 : "rootfs"
  111. [ 0.809588] mtd: device 3 (rootfs) set to be root filesystem
  112. [ 0.815470] 1 squashfs-split partitions found on MTD device rootfs
  113. [ 0.821818] 0x000000440000-0x000000fe0000 : "rootfs_data"
  114. [ 0.830229] 0x000000fe0000-0x000000ff0000 : "nvram"
  115. [ 0.841123] bcm63xx-spi 10000800.spi: at [mem 0x10000800-0x10000f0b flags 0x200] (irq 9, FIFOs size 542)
  116. [ 0.854169] libphy: Fixed MDIO Bus: probed
  117. [ 0.904954] b53_common: found switch: BCM63xx, rev 0
  118. [ 0.910939] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
  119. [ 0.921033] leds-gpio leds-gpio.0: Skipping unavailable LED gpio 0 ((null))
  120. [ 0.928262] leds-gpio leds-gpio.0: Skipping unavailable LED gpio 0 ((null))
  121. [ 0.935406] leds-gpio leds-gpio.0: Skipping unavailable LED gpio 0 ((null))
  122. [ 0.942570] leds-gpio leds-gpio.0: Skipping unavailable LED gpio 0 ((null))
  123. [ 0.949737] leds-gpio leds-gpio.0: Skipping unavailable LED gpio 0 ((null))
  124. [ 0.960866] NET: Registered protocol family 10
  125. [ 0.969293] Segment Routing with IPv6
  126. [ 0.973325] NET: Registered protocol family 17
  127. [ 0.977985] 8021q: 802.1Q VLAN Support v1.8
  128. [ 0.989444] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
  129. [ 1.011420] Freeing unused kernel memory: 1296K
  130. [ 1.016044] This architecture does not have kernel memory protection.
  131. [ 1.022671] Run /sbin/init as init process
  132. [ 1.937529] init: Console is alive
  133. [ 1.941396] init: - watchdog -
  134. [ 3.207940] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  135. [ 3.325910] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  136. [ 3.338772] init: - preinit -
  137. [ 4.470924] random: jshn: uninitialized urandom read (4 bytes read)
  138. [ 4.537895] random: jshn: uninitialized urandom read (4 bytes read)
  139. [ 4.729826] random: jshn: uninitialized urandom read (4 bytes read)
  140. [ 5.386693] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
  141. [ 5.393596] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port1, 100Mbps, full-duplex
  142. [ 5.393821] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port2, 100Mbps, full-duplex
  143. [ 5.410209] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  144. [ 5.506766] urandom_read: 2 callbacks suppressed
  145. [ 5.506787] random: procd: uninitialized urandom read (4 bytes read)
  146. [ 9.930945] jffs2: notice: (449) jffs2_build_xattr_subsystem: complete building xattr subsystem, 24 of xdatum (0 unchecked, 16 orphan) and 37 of xref (9 dead, 18 orphan) found.
  147. [ 9.949131] mount_root: switching to jffs2 overlay
  148. [ 9.993802] overlayfs: upper fs does not support tmpfile.
  149. [ 10.006190] urandom-seed: Seeding with /etc/urandom.seed
  150. [ 10.201233] procd: - early -
  151. [ 10.204455] procd: - watchdog -
  152. [ 10.859442] procd: - watchdog -
  153. [ 10.863038] procd: - ubus -
  154. [ 10.910814] random: ubusd: uninitialized urandom read (4 bytes read)
  155. [ 11.006232] random: ubusd: uninitialized urandom read (4 bytes read)
  156. [ 11.013405] random: ubusd: uninitialized urandom read (4 bytes read)
  157. [ 11.021510] procd: - init -
  158. [ 11.940339] kmodloader: loading kernel modules from /etc/modules.d/*
  159. [ 12.086577] Loading modules backported from Linux version v5.4.27-0-g585e0cc08069
  160. [ 12.094408] Backport generated by backports.git v5.4.27-1-0-gf6e8852f
  161. [ 12.154947] xt_time: kernel timezone is -0000
  162. [ 12.276148] urngd: v1.0.2 started.
  163. [ 12.422711] PPP generic driver version 2.4.2
  164. [ 12.431894] NET: Registered protocol family 24
  165. [ 12.502430] b43-phy0: Broadcom 43222 WLAN found (core revision 16)
  166. [ 12.551329] b43-phy0: Found PHY: Analog 8, Type 4 (N), Revision 6
  167. [ 12.557624] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2056, Revision 6, Version 0
  168. [ 12.579968] random: crng init done
  169. [ 12.580787] Broadcom 43xx driver loaded [ Features: PNL ]
  170. [ 12.583464] random: 1 urandom warning(s) missed due to ratelimiting
  171. [ 12.602218] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  172. [ 12.696107] kmodloader: done loading kernel modules from /etc/modules.d/*
  173. [ 22.671601] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port1, 100Mbps, full-duplex
  174. [ 22.679731] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port2, 100Mbps, full-duplex
  175. [ 22.690555] br-lan: port 1(eth0.1) entered blocking state
  176. [ 22.696259] br-lan: port 1(eth0.1) entered disabled state
  177. [ 22.702466] device eth0.1 entered promiscuous mode
  178. [ 22.707458] device eth0 entered promiscuous mode
  179. [ 22.718961] br-lan: port 1(eth0.1) entered blocking state
  180. [ 22.724556] br-lan: port 1(eth0.1) entered forwarding state
  181. [ 23.664161] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!