Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Comparison of CoreXY machines at MRRF 2019
- Video by 3D Distributed
- https://www.youtube.com/watch?v=ifQt9VfWZ1Y
- (Observed features by machine)
- -------------------------------------
- - Machine 1 (0:00)
- - Base is thick (~1/4" or higher) milled aluminum plate
- - 4040 extrusion used for Z-axis members
- - Aluminum plates mounted on top of the Z-axis beams as X- and Y-axis structural members
- - Single Z-axis drive with large linear rail (looks like MGN15?)
- - LED strips mounted inside Z-axis beams
- - E3D toolchanger w/ 4 tools
- - Aluminum plate and linear rail on X-axis (looks like MGN12 or smaller)
- - PEI on build plate
- -------------------------------------
- - Machine 2 (0:29)
- - Metal-enclosed on three sides
- - Triple-Z axis
- - Linear rails on all axes
- - Bondtech BMG direct-drive
- - Titan Aero
- - BLTouch
- - Single 5015-blower layer cooling
- - Single-piece aluminum plate around Z_max perimeter as X- and Y-axis structural members
- - Solid aluminum plate at the bottom
- - 0.9deg steppers
- - Meanwell PSU
- -------------------------------------
- - Machine 3 (0:57)
- - PanelDue 7" touch display
- - 2020 extrusion for all structural members
- - Triple-Z with linear rails
- - Zero-backlash leadscrew nuts
- - Direct-drive Bondtech BMG and E3D 34mm pancake stepper
- - Single 5015-blower layer cooling
- - MicroSwiss slotted cooling block / silicone heater block sock
- - X-axis gantry is ONLY linear rail! FUCK!
- - Optical endstops
- -------------------------------------
- - Machine 4 (1:17)
- - E3D toolchanger
- - 4x hotends with Titan extruders in Bowden configuration
- - 4040 extrusion for Z-axis structural members
- - Z-rail attached to 4020 Z-beam at rear X-midpoint (also connected to single-piece aluminum top)
- - Single-piece thick (>1/4") aluminum plate for X- and Y-axis structural members on top of the Z-beams
- - Single-Z with extra-wide linear rail
- - Dual linear rail on x-axis?? (looks like over/under?)
- - 400x300 heated bed
- - Direct-drive hotend, unknown extruder
- - Duet (maybe DuetWifi) controller
- - Duex-5C expansion board
- - Raspberry Pi
- - Non-Meanwell PSU
- - Milled aluminum plate under Z-beams
- - Y-axis linear rails undermounted to upper aluminum plate
- - LED strips on all four vertical corners
- - 400x400x600 maybe?
- -------------------------------------
- - Machine 5 (2:12)
- - VORON-style (actuated XY gantry, fixed bed @ Z_min)
- - 2020 extrusions for all structural members
- - Three-point Z-leadscrews with single-drive + belts
- - All axes mounted on ExoSlides
- - Direct-drive extruder w/ 40mm NEMA17
- - Zero-backlash leadscrew nuts
- - Drag chains on all axes
- -------------------------------------
- - Machine 6 (2:34)
- - CoreXY conversion for Ender-4
- - 2020 extrusion on all members
- - Stock Creality Hotend Box
- - Single-Z
- - Polycarbonate wheels
- - Bondtech BMG clone in Bowden configuration
- - Capricorn tubing
- - Logitech C270 webcam
- - Non-Meanwell PSU
- - Horizontal drag chain
- -------------------------------------
- - Machine 7 (3:11)
- - RatRig Hypercube frame kit
- - Meanwell PSU
- - Polycarbonate wheels
- - Bondtech BMG in Bowden configuration
- - Capricorn tubing
- - e3D v6 clone hotend
- - Mini DiffIR Z-probe
- - Quad-Z
- - Duet 10" touch display
- - Black Delrin idler pulleys <--- Anodized aluminum idler pulleys???
- - Black corner plates
- -------------------------------------
- - Machine 8 (4:05)
- - Big fuckin ugly mess
- - 10mm PU GT-2 belts
- - Completely overengineered aluminum members
- - 5x e3D v6 gang-mounted on effector
- - Shittiest print at MRRF by far
- - This design is going to give me a tumor if I keep looking at it
- -------------------------------------
- - Machine 9 (4:49)
- - NO extrusion anywhere!
- - Looks like laser-cut and brake-bent sheet steel w/ powdercoating
- - Dual-Z
- - LED strips around inside perimeter of upper frame
- - Linear rail on X- and Y-axes
- - BLTouch
- - Dual-extruder
- - Capricorn tubing
- - Horizontal drag chain
- -------------------------------------
- - Machine 10 (5:18)
- - Beefy AF extrusion frame
- - 4040 on Z-axis structural members
- - 2020 around upper perimeter
- - Thick (>14") aluminum braces on all exterior corners
- - NEMA17 48mm steppers on X and Y-axes
- - Linear rails on X- and Y-axes
- - Direct-drive Titan Aero extruder
- - Berd-Air cooling
- - Meanwell PSU
- - Quad-Z
- -------------------------------------
- - Machine 11 (8:41)
- - 2020 extrusion for all structural members
- - Dual-Z
- - Single 5015-blower
- - Standard HEVO build
- -------------------------------------
- - Machine 12 (8:59)
- - Big-ass printer for 2020 extrusion
- - Dual-Z
- - Horizontal drag chain
- - Creality Hotend Box
- - CRAZY-long Bowden tube (>1m, and it's not even Capricorn!)
- -------------------------------------
- - Machine 13 (9:54)
- - Joshua Vasquez' toolchanger demo
- - Smoothieboard x5C
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement