API tools faq
paste
pally99

console.log

pally99
Jun 17th, 2021
126
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 36.73 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 2020.04-5.3.0-devel+git.76fd4496a40b (Apr 07 2021 - 07:35:42 +0000)
  2.  
  3. CPU: NXP i.MX8QM RevB A53 at 1200 MHz
  4.  
  5. DRAM: 4 GiB
  6. MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
  7. Loading Environment from MMC... OK
  8. In: serial
  9. Out: serial
  10. Err: serial
  11. Model: Toradex Apalis iMX8 QuadMax 4GB IT V1.1C, Serial# 06874843
  12.  
  13. BuildInfo:
  14. - SCFW 0d54291f, SECO-FW d63fdb21, IMX-MKIMAGE 8947fea3, ATF 7f1187b
  15. - U-Boot 2020.04-5.3.0-devel+git.76fd4496a40b
  16.  
  17. switch to partitions #0, OK
  18. mmc0(part 0) is current device
  19. flash target is MMC:0
  20. Net: eth0: ethernet@5b040000
  21. Fastboot: Normal
  22. Normal Boot
  23. Hit any key to stop autoboot: 0
  24. MMC: no card present
  25. MMC: no card present
  26. switch to partitions #0, OK
  27. mmc0(part 0) is current device
  28. Scanning mmc 0:1...
  29. Found U-Boot script /boot.scr
  30. 2148 bytes read in 17 ms (123 KiB/s)
  31. ## Executing script at 83100000
  32. Loading hdp firmware from 0x000000009c000000 offset 0x0000000000002000
  33. Loading hdp firmware Complete
  34. 166756 bytes read in 22 ms (7.2 MiB/s)
  35. 10214352 bytes read in 247 ms (39.4 MiB/s)
  36. Uncompressed size: 24136192 = 0x1704A00
  37. Bootargs: pci=nomsi root=/dev/mmcblk0p2 ro rootwait
  38. ## Flattened Device Tree blob at 83000000
  39. Booting using the fdt blob at 0x83000000
  40. Loading Device Tree to 00000000fd621000, end 00000000fd64cb63 ... OK
  41.  
  42. Starting kernel ...
  43.  
  44. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  45. [ 0.000000] Linux version 5.4.91-5.3.0-devel+git.6afb048a71e3 (oe-user@oe-host) (gcc version 9.3.0 (GCC)) #1 SMP PREEMPT Wed Apr 7 08:36:44 UTC 2021
  46. [ 0.000000] Machine model: Toradex Apalis iMX8QM V1.1 on Apalis Evaluation Board
  47. [ 0.000000] efi: Getting EFI parameters from FDT:
  48. [ 0.000000] efi: UEFI not found.
  49. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000096000000, size 960 MiB
  50. [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  51. [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000090400000, size 1 MiB
  52. [ 0.000000] OF: reserved mem: initialized node vdevbuffer, compatible id shared-dma-pool
  53. [ 0.000000] NUMA: No NUMA configuration found
  54. [ 0.000000] NUMA: Faking a node at [mem 0x0000000080200000-0x00000008ffffffff]
  55. [ 0.000000] NUMA: NODE_DATA [mem 0x8ff7c3500-0x8ff7c4fff]
  56. [ 0.000000] Zone ranges:
  57. [ 0.000000] DMA32 [mem 0x0000000080200000-0x00000000ffffffff]
  58. [ 0.000000] Normal [mem 0x0000000100000000-0x00000008ffffffff]
  59. [ 0.000000] Movable zone start for each node
  60. [ 0.000000] Early memory node ranges
  61. [ 0.000000] node 0: [mem 0x0000000080200000-0x0000000083ffffff]
  62. [ 0.000000] node 0: [mem 0x0000000086400000-0x0000000087ffffff]
  63. [ 0.000000] node 0: [mem 0x0000000090000000-0x00000000901fffff]
  64. [ 0.000000] node 0: [mem 0x0000000090500000-0x0000000091ffffff]
  65. [ 0.000000] node 0: [mem 0x0000000094c00000-0x0000000094ffffff]
  66. [ 0.000000] node 0: [mem 0x0000000095400000-0x00000000ffffffff]
  67. [ 0.000000] node 0: [mem 0x0000000880000000-0x00000008ffffffff]
  68. [ 0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x00000008ffffffff]
  69. [ 0.000000] psci: probing for conduit method from DT.
  70. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  71. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  72. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  73. [ 0.000000] psci: SMC Calling Convention v1.1
  74. [ 0.000000] percpu: Embedded 24 pages/cpu s58904 r8192 d31208 u98304
  75. [ 0.000000] Detected VIPT I-cache on CPU0
  76. [ 0.000000] CPU features: detected: ARM erratum 845719
  77. [ 0.000000] CPU features: detected: GIC system register CPU interface
  78. [ 0.000000] Speculative Store Bypass Disable mitigation not required
  79. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 977508
  80. [ 0.000000] Policy zone: Normal
  81. [ 0.000000] Kernel command line: pci=nomsi root=/dev/mmcblk0p2 ro rootwait
  82. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  83. [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  84. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  85. [ 0.000000] software IO TLB: mapped [mem 0xf9621000-0xfd621000] (64MB)
  86. [ 0.000000] Memory: 2817672K/3972096K available (13884K kernel code, 978K rwdata, 6164K rodata, 2496K init, 1013K bss, 171384K reserved, 983040K cma-reserved)
  87. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  88. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  89. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
  90. [ 0.000000] Tasks RCU enabled.
  91. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  92. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
  93. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  94. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  95. [ 0.000000] GICv3: 512 SPIs implemented
  96. [ 0.000000] GICv3: 0 Extended SPIs implemented
  97. [ 0.000000] GICv3: Distributor has no Range Selector support
  98. [ 0.000000] GICv3: 16 PPIs implemented
  99. [ 0.000000] GICv3: no VLPI support, no direct LPI support
  100. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000051b00000
  101. [ 0.000000] ITS: No ITS available, not enabling LPIs
  102. [ 0.000000] random: get_random_bytes called from start_kernel+0x2b8/0x44c with crng_init=0
  103. [ 0.000000] arch_timer: cp15 timer(s) running at 8.00MHz (phys).
  104. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 440795202120 ns
  105. [ 0.000004] sched_clock: 56 bits at 8MHz, resolution 125ns, wraps every 2199023255500ns
  106. [ 0.000705] Console: colour dummy device 80x25
  107. [ 0.001209] printk: console [tty0] enabled
  108. [ 0.001293] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.00 BogoMIPS (lpj=32000)
  109. [ 0.001314] pid_max: default: 32768 minimum: 301
  110. [ 0.001396] LSM: Security Framework initializing
  111. [ 0.001470] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  112. [ 0.001499] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  113. [ 0.002934] ASID allocator initialised with 32768 entries
  114. [ 0.003010] rcu: Hierarchical SRCU implementation.
  115. [ 0.005350] EFI services will not be available.
  116. [ 0.005583] smp: Bringing up secondary CPUs ...
  117. [ 0.006352] Detected VIPT I-cache on CPU1
  118. [ 0.006380] GICv3: CPU1: found redistributor 1 region 0:0x0000000051b20000
  119. [ 0.006415] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  120. [ 0.007181] Detected VIPT I-cache on CPU2
  121. [ 0.007196] GICv3: CPU2: found redistributor 2 region 0:0x0000000051b40000
  122. [ 0.007213] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  123. [ 0.007968] Detected VIPT I-cache on CPU3
  124. [ 0.007982] GICv3: CPU3: found redistributor 3 region 0:0x0000000051b60000
  125. [ 0.007998] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  126. [ 0.009570] CPU features: detected: EL2 vector hardening
  127. [ 0.009582] CPU features: detected: Branch predictor hardening
  128. [ 0.009588] Detected PIPT I-cache on CPU4
  129. [ 0.009603] GICv3: CPU4: found redistributor 100 region 0:0x0000000051b80000
  130. [ 0.009622] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
  131. [ 0.010375] Detected PIPT I-cache on CPU5
  132. [ 0.010385] GICv3: CPU5: found redistributor 101 region 0:0x0000000051ba0000
  133. [ 0.010397] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
  134. [ 0.010453] smp: Brought up 1 node, 6 CPUs
  135. [ 0.010595] SMP: Total of 6 processors activated.
  136. [ 0.010606] CPU features: detected: 32-bit EL0 Support
  137. [ 0.010617] CPU features: detected: CRC32 instructions
  138. [ 0.020309] CPU: All CPU(s) started at EL2
  139. [ 0.020346] alternatives: patching kernel code
  140. [ 0.021360] devtmpfs: initialized
  141. [ 0.038678] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  142. [ 0.038718] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
  143. [ 0.064573] pinctrl core: initialized pinctrl subsystem
  144. [ 0.065088] DMI not present or invalid.
  145. [ 0.065360] NET: Registered protocol family 16
  146. [ 0.071764] DMA: preallocated 256 KiB pool for atomic allocations
  147. [ 0.071785] audit: initializing netlink subsys (disabled)
  148. [ 0.071957] audit: type=2000 audit(0.068:1): state=initialized audit_enabled=0 res=1
  149. [ 0.072522] cpuidle: using governor menu
  150. [ 0.073941] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  151. [ 0.075841] Serial: AMBA PL011 UART driver
  152. [ 0.075892] imx mu driver is registered.
  153. [ 0.075916] imx rpmsg driver is registered.
  154. [ 0.124588] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  155. [ 0.124616] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
  156. [ 0.124629] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  157. [ 0.124641] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
  158. [ 0.125763] cryptd: max_cpu_qlen set to 1000
  159. [ 0.129624] ACPI: Interpreter disabled.
  160. [ 0.131670] iommu: Default domain type: Translated
  161. [ 0.131796] vgaarb: loaded
  162. [ 0.132079] SCSI subsystem initialized
  163. [ 0.132374] usbcore: registered new interface driver usbfs
  164. [ 0.132418] usbcore: registered new interface driver hub
  165. [ 0.132452] usbcore: registered new device driver usb
  166. [ 0.134315] mc: Linux media interface: v0.10
  167. [ 0.134348] videodev: Linux video capture interface: v2.00
  168. [ 0.134413] pps_core: LinuxPPS API ver. 1 registered
  169. [ 0.134424] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  170. [ 0.134448] PTP clock support registered
  171. [ 0.134786] EDAC MC: Ver: 3.0.0
  172. [ 0.136403] No BMan portals available!
  173. [ 0.136817] QMan: Allocated lookup table at (____ptrval____), entry count 65537
  174. [ 0.137610] No QMan portals available!
  175. [ 0.138793] No USDPAA memory, no 'fsl,usdpaa-mem' in device-tree
  176. [ 0.139286] FPGA manager framework
  177. [ 0.139368] Advanced Linux Sound Architecture Driver Initialized.
  178. [ 0.140856] imx-scu scu: NXP i.MX SCU Initialized
  179. [ 0.147284] random: fast init done
  180. [ 0.183885] imx8qm-pinctrl scu:pinctrl: initialized IMX pinctrl driver
  181. [ 0.187577] clocksource: Switched to clocksource arch_sys_counter
  182. [ 0.187761] VFS: Disk quotas dquot_6.6.0
  183. [ 0.187820] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  184. [ 0.187998] pnp: PnP ACPI: disabled
  185. [ 0.216655] thermal_sys: Registered thermal governor 'step_wise'
  186. [ 0.216659] thermal_sys: Registered thermal governor 'power_allocator'
  187. [ 0.217495] NET: Registered protocol family 2
  188. [ 0.217851] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
  189. [ 0.217910] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
  190. [ 0.218129] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
  191. [ 0.218607] TCP: Hash tables configured (established 32768 bind 32768)
  192. [ 0.218717] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
  193. [ 0.218801] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
  194. [ 0.218992] NET: Registered protocol family 1
  195. [ 0.219325] RPC: Registered named UNIX socket transport module.
  196. [ 0.219338] RPC: Registered udp transport module.
  197. [ 0.219347] RPC: Registered tcp transport module.
  198. [ 0.219357] RPC: Registered tcp NFSv4.1 backchannel transport module.
  199. [ 0.219375] PCI: CLS 0 bytes, default 64
  200. [ 0.220198] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  201. [ 0.221706] kvm [1]: IPA Size Limit: 40bits
  202. [ 0.222350] kvm [1]: vgic-v2@52020000
  203. [ 0.222380] kvm [1]: GIC system register CPU interface enabled
  204. [ 0.222478] kvm [1]: vgic interrupt IRQ1
  205. [ 0.222615] kvm [1]: Hyp mode initialized successfully
  206. [ 0.226141] Initialise system trusted keyrings
  207. [ 0.226244] workingset: timestamp_bits=44 max_order=20 bucket_order=0
  208. [ 0.232869] NFS: Registering the id_resolver key type
  209. [ 0.232899] Key type id_resolver registered
  210. [ 0.232909] Key type id_legacy registered
  211. [ 0.232926] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  212. [ 0.232956] jffs2: version 2.2. (NAND) �© 2001-2006 Red Hat, Inc.
  213. [ 0.246400] Key type asymmetric registered
  214. [ 0.246413] Asymmetric key parser 'x509' registered
  215. [ 0.246458] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
  216. [ 0.246474] io scheduler mq-deadline registered
  217. [ 0.246485] io scheduler kyber registered
  218. [ 0.259859] imx6q-pcie 5f000000.pcie: 5f000000.pcie supply epdev_on not found, using dummy regulator
  219. [ 0.261702] EINJ: ACPI disabled.
  220. [ 0.375429] mxs-dma 5b810000.dma-apbh: initialized
  221. [ 0.377031] Bus freq driver module loaded
  222. [ 0.382971] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  223. [ 0.387137] 5a060000.serial: ttyLP0 at MMIO 0x5a060010 (irq = 47, base_baud = 5000000) is a FSL_LPUART
  224. [ 0.387479] fsl-lpuart 5a060000.serial: DMA tx channel request failed, operating without tx DMA
  225. [ 0.387498] fsl-lpuart 5a060000.serial: DMA rx channel request failed, operating without rx DMA
  226. [ 0.387871] 5a070000.serial: ttyLP1 at MMIO 0x5a070010 (irq = 48, base_baud = 5000000) is a FSL_LPUART
  227. [ 0.387894] fsl-lpuart 5a070000.serial: Serial: Console lpuart rounded baud ratefrom 35971 to 115200
  228. [ 1.452579] printk: console [ttyLP1] enabled
  229. [ 1.457662] 5a080000.serial: ttyLP2 at MMIO 0x5a080010 (irq = 49, base_baud = 5000000) is a FSL_LPUART
  230. [ 1.467300] fsl-lpuart 5a080000.serial: DMA tx channel request failed, operating without tx DMA
  231. [ 1.476025] fsl-lpuart 5a080000.serial: DMA rx channel request failed, operating without rx DMA
  232. [ 1.485200] 5a090000.serial: ttyLP3 at MMIO 0x5a090010 (irq = 50, base_baud = 5000000) is a FSL_LPUART
  233. [ 1.497544] arm-smmu 51400000.iommu: probing hardware configuration...
  234. [ 1.504096] arm-smmu 51400000.iommu: SMMUv2 with:
  235. [ 1.508814] arm-smmu 51400000.iommu: stage 1 translation
  236. [ 1.514232] arm-smmu 51400000.iommu: stage 2 translation
  237. [ 1.519643] arm-smmu 51400000.iommu: nested translation
  238. [ 1.524975] arm-smmu 51400000.iommu: stream matching with 32 register groups
  239. [ 1.532140] arm-smmu 51400000.iommu: 32 context banks (0 stage-2 only)
  240. [ 1.538772] arm-smmu 51400000.iommu: Supported page sizes: 0x61311000
  241. [ 1.545318] arm-smmu 51400000.iommu: Stage-1: 48-bit VA -> 48-bit IPA
  242. [ 1.551861] arm-smmu 51400000.iommu: Stage-2: 48-bit IPA -> 48-bit PA
  243. [ 1.629497] imx-drm display-subsystem: parent device of /bus@57240000/ldb@572410e0/lvds-channel@0 is not available
  244. [ 1.662683] loop: module loaded
  245. [ 1.666195] zram: Added device: zram0
  246. [ 1.674254] ahci-imx 5f020000.sata: Adding to iommu group 0
  247. [ 1.680033] ahci-imx 5f020000.sata: can't get sata_ext clock.
  248. [ 1.686130] imx ahci driver is registered.
  249. [ 1.697593] libphy: Fixed MDIO Bus: probed
  250. [ 1.701924] tun: Universal TUN/TAP device driver, 1.6
  251. [ 1.708622] fec 5b040000.ethernet: Adding to iommu group 1
  252. [ 1.716525] Freescale FM module, FMD API version 21.1.0
  253. [ 1.722581] Freescale FM Ports module
  254. [ 1.727782] VFIO - User Level meta-driver version: 0.3
  255. [ 1.736734] cdns-usb3 5b110000.usb3: Adding to iommu group 2
  256. [ 1.743288] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  257. [ 1.749841] ehci-pci: EHCI PCI platform driver
  258. [ 1.755518] usbcore: registered new interface driver usb-storage
  259. [ 1.761647] usbcore: registered new interface driver usbserial_generic
  260. [ 1.768221] usbserial: USB Serial support registered for generic
  261. [ 1.774260] usbcore: registered new interface driver cp210x
  262. [ 1.779871] usbserial: USB Serial support registered for cp210x
  263. [ 1.785824] usbcore: registered new interface driver ftdi_sio
  264. [ 1.791625] usbserial: USB Serial support registered for FTDI USB Serial Device
  265. [ 1.798969] usbcore: registered new interface driver pl2303
  266. [ 1.804600] usbserial: USB Serial support registered for pl2303
  267. [ 1.810569] usbcore: registered new interface driver usb_serial_simple
  268. [ 1.817125] usbserial: USB Serial support registered for carelink
  269. [ 1.823248] usbserial: USB Serial support registered for zio
  270. [ 1.828930] usbserial: USB Serial support registered for funsoft
  271. [ 1.834961] usbserial: USB Serial support registered for flashloader
  272. [ 1.841351] usbserial: USB Serial support registered for google
  273. [ 1.847301] usbserial: USB Serial support registered for libtransistor
  274. [ 1.853855] usbserial: USB Serial support registered for vivopay
  275. [ 1.859883] usbserial: USB Serial support registered for moto_modem
  276. [ 1.866174] usbserial: USB Serial support registered for motorola_tetra
  277. [ 1.872823] usbserial: USB Serial support registered for novatel_gps
  278. [ 1.879205] usbserial: USB Serial support registered for hp4x
  279. [ 1.884973] usbserial: USB Serial support registered for suunto
  280. [ 1.890917] usbserial: USB Serial support registered for siemens_mpi
  281. [ 1.903875] input: sc-powerkey as /devices/platform/sc-powerkey/input/input0
  282. [ 1.913467] imx-sc-rtc scu:rtc: registered as rtc1
  283. [ 1.918871] i2c /dev entries driver
  284. [ 1.924271] pps_ldisc: PPS line discipline registered
  285. [ 1.938527] sdhci: Secure Digital Host Controller Interface driver
  286. [ 1.944888] sdhci: Copyright(c) Pierre Ossman
  287. [ 1.950018] Synopsys Designware Multimedia Card Interface Driver
  288. [ 1.957806] sdhci-pltfm: SDHCI platform and OF driver helper
  289. [ 1.965344] sdhci-esdhc-imx 5b010000.mmc: Adding to iommu group 3
  290. [ 2.003723] mmc0: SDHCI controller on 5b010000.mmc [5b010000.mmc] using ADMA
  291. [ 2.012044] sdhci-esdhc-imx 5b020000.mmc: Adding to iommu group 3
  292. [ 2.019233] sdhci-esdhc-imx 5b030000.mmc: Adding to iommu group 3
  293. [ 2.030707] ledtrig-cpu: registered to indicate activity on CPUs
  294. [ 2.039300] caam 31400000.crypto: device ID = 0x0a16040000000100 (Era 9)
  295. [ 2.046061] caam 31400000.crypto: job rings = 2, qi = 0
  296. [ 2.063692] caam algorithms registered in /proc/crypto
  297. [ 2.070292] caam 31400000.crypto: caam pkc algorithms registered in /proc/crypto
  298. [ 2.077745] caam 31400000.crypto: registering rng-caam
  299. [ 2.083389] Device caam-keygen registered
  300. [ 2.088985] hidraw: raw HID events driver (C) Jiri Kosina
  301. [ 2.092636] random: crng init done
  302. [ 2.094535] usbcore: registered new interface driver usbhid
  303. [ 2.103432] usbhid: USB HID core driver
  304. [ 2.110663] No fsl,qman node
  305. [ 2.113569] Freescale USDPAA process driver
  306. [ 2.115082] mmc0: new HS400 MMC card at address 0001
  307. [ 2.117749] fsl-usdpaa: no region found
  308. [ 2.117751] Freescale USDPAA process IRQ driver
  309. [ 2.132112] mmcblk0: mmc0:0001 S0J56X 14.8 GiB
  310. [ 2.137080] mmcblk0boot0: mmc0:0001 S0J56X partition 1 31.5 MiB
  311. [ 2.143291] mmcblk0boot1: mmc0:0001 S0J56X partition 2 31.5 MiB
  312. [ 2.149393] mmcblk0rpmb: mmc0:0001 S0J56X partition 3 4.00 MiB, chardev (237:0)
  313. [ 2.157972] [VPU Decoder] warning: init rtx channel failed, ret: -517
  314. [ 2.158095] mmcblk0: p1 p2
  315. [ 2.164448] [VPU Decoder] failed to request mailbox, ret = -517
  316. [ 2.177086] [VPU Encoder] warning: init rtx channel failed, ret: -517
  317. [ 2.183661] [VPU Encoder] warning: init rtx channel failed, ret: -517
  318. [ 2.190309] [VPU Encoder] fail to request mailbox, ret = -517
  319. [ 2.200464] dvbdev: DVB: registering new adapter (PPM DVB adapter)
  320. [ 2.207292] dvbdev: DVB: registering new adapter (PPM DVB adapter)
  321. [ 2.297555] imx-spdif sound-spdif: snd-soc-dummy-dai <-> 59020000.spdif mapping ok
  322. [ 2.305200] imx-spdif sound-spdif: ASoC: no DMI vendor name!
  323. [ 2.312271] imx-audmix imx-audmix.0: failed to find SAI platform device
  324. [ 2.318964] imx-audmix: probe of imx-audmix.0 failed with error -22
  325. [ 2.328838] pktgen: Packet Generator for packet performance testing. Version: 2.75
  326. [ 2.337082] NET: Registered protocol family 26
  327. [ 2.342078] NET: Registered protocol family 10
  328. [ 2.347139] Segment Routing with IPv6
  329. [ 2.350868] NET: Registered protocol family 17
  330. [ 2.355379] tsn generic netlink module v1 init...
  331. [ 2.360160] Key type dns_resolver registered
  332. [ 2.364836] registered taskstats version 1
  333. [ 2.368946] Loading compiled-in X.509 certificates
  334. [ 2.400656] mxs_phy 5b100000.usbphy: 5b100000.usbphy supply phy-3p0 not found, using dummy regulator
  335. [ 2.424249] usb_phy_generic bus@5b000000:usb3-phy: bus@5b000000:usb3-phy supply vcc not found, using dummy regulator
  336. [ 2.434987] usb_phy_generic bus@5b000000:usbphynop2: bus@5b000000:usbphynop2 supply vcc not found, using dummy regulator
  337. [ 2.449307] sgtl5000 2-000a: sgtl5000 revision 0x11
  338. [ 2.494931] usb3503 2-0008: switched to HUB mode
  339. [ 2.499598] usb3503 2-0008: usb3503_probe: probed in hub mode
  340. [ 2.505452] i2c i2c-2: LPI2C adapter registered
  341. [ 2.513416] rtc-ds1307 3-0068: registered as rtc0
  342. [ 2.518174] i2c i2c-3: LPI2C adapter registered
  343. [ 2.523602] i2c i2c-4: LPI2C adapter registered
  344. [ 2.532962] imx6q-pcie 5f000000.pcie: 5f000000.pcie supply epdev_on not found, using dummy regulator
  345. [ 2.533439] pwm-backlight backlight: backlight supply power not found, using dummy regulator
  346. [ 2.542278] imx6q-pcie 5f000000.pcie: pcie_ext clock source missing or invalid
  347. [ 2.551170] imx6q-pcie 5f010000.pcie: pcie_ext clock source missing or invalid
  348. [ 2.558234] dpu-core 56180000.dpu: driver probed
  349. [ 2.572552] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  350. [ 2.579206] [drm] No driver support for vblank timestamp query.
  351. [ 2.585333] imx-drm display-subsystem: bound imx-drm-dpu-bliteng.2 (ops dpu_bliteng_ops)
  352. [ 2.593521] imx-drm display-subsystem: bound imx-drm-dpu-bliteng.5 (ops dpu_bliteng_ops)
  353. [ 2.602210] imx-drm display-subsystem: bound imx-dpu-crtc.0 (ops dpu_crtc_ops)
  354. [ 2.609892] imx-drm display-subsystem: bound imx-dpu-crtc.1 (ops dpu_crtc_ops)
  355. [ 2.617564] imx-drm display-subsystem: bound imx-dpu-crtc.3 (ops dpu_crtc_ops)
  356. [ 2.625238] imx-drm display-subsystem: bound imx-dpu-crtc.4 (ops dpu_crtc_ops)
  357. [ 2.632905] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 0
  358. [ 2.640786] dpu-core 57180000.dpu: driver probed
  359. [ 2.645802] ahci-imx 5f020000.sata: phy impedance ratio is not specified.
  360. [ 2.652722] ahci-imx 5f020000.sata: No cache used with register defaults set!
  361. [ 2.660097] ahci-imx 5f020000.sata: 5f020000.sata supply ahci not found, using dummy regulator
  362. [ 2.668794] ahci-imx 5f020000.sata: 5f020000.sata supply phy not found, using dummy regulator
  363. [ 2.677376] ahci-imx 5f020000.sata: 5f020000.sata supply target not found, using dummy regulator
  364. [ 2.686909] ahci-imx 5f020000.sata: external osc is used.
  365. [ 2.695147] ahci-imx 5f020000.sata: no ahb clock.
  366. [ 2.699932] ahci-imx 5f020000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode
  367. [ 2.708833] ahci-imx 5f020000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sadm sds apst
  368. [ 2.719843] scsi host0: ahci-imx
  369. [ 2.723335] ata1: SATA max UDMA/133 mmio [mem 0x5f020000-0x5f02ffff] port 0x100 irq 105
  370. [ 2.747472] pps pps0: new PPS source ptp0
  371. [ 2.753912] libphy: fec_enet_mii_bus: probed
  372. [ 2.760021] fec 5b040000.ethernet eth0: registered PHC device 0
  373. [ 2.769850] xhci-cdns3: xHCI Host Controller
  374. [ 2.774251] xhci-cdns3: new USB bus registered, assigned bus number 1
  375. [ 2.782206] xhci-cdns3: hcc params 0x200073c8 hci version 0x100 quirks 0x0000001000018010
  376. [ 2.791119] hub 1-0:1.0: USB hub found
  377. [ 2.794909] hub 1-0:1.0: 1 port detected
  378. [ 2.799064] xhci-cdns3: xHCI Host Controller
  379. [ 2.803447] xhci-cdns3: new USB bus registered, assigned bus number 2
  380. [ 2.809995] xhci-cdns3: Host supports USB 3.0 SuperSpeed
  381. [ 2.815453] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  382. [ 2.823985] hub 2-0:1.0: USB hub found
  383. [ 2.827761] hub 2-0:1.0: 1 port detected
  384. [ 2.832976] imx_usb 5b0d0000.usb: 5b0d0000.usb supply vbus not found, using dummy regulator
  385. [ 2.845044] ci_hdrc ci_hdrc.0: EHCI Host Controller
  386. [ 2.849948] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 3
  387. [ 2.871647] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
  388. [ 2.877876] hub 3-0:1.0: USB hub found
  389. [ 2.881680] hub 3-0:1.0: 1 port detected
  390. [ 2.890356] ci_hdrc ci_hdrc.1: EHCI Host Controller
  391. [ 2.895264] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 4
  392. [ 2.915821] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
  393. [ 2.921964] hub 4-0:1.0: USB hub found
  394. [ 2.925789] hub 4-0:1.0: 1 port detected
  395. [ 2.931379] gpio-fan gpio-fan: GPIO fan initialized
  396. [ 2.937805] sdhci-esdhc-imx 5b020000.mmc: Got CD GPIO
  397. [ 2.972527] mmc1: SDHCI controller on 5b020000.mmc [5b020000.mmc] using ADMA
  398. [ 2.981497] sdhci-esdhc-imx 5b030000.mmc: Got CD GPIO
  399. [ 3.018321] mmc2: SDHCI controller on 5b030000.mmc [5b030000.mmc] using ADMA
  400. [ 3.046061] ata1: SATA link down (SStatus 0 SControl 300)
  401. [ 3.051795] debugfs: Directory '59050000.sai' with parent 'apalis-imx8qm-sgtl5000' already present!
  402. [ 3.061472] asoc-simple-card sound: sgtl5000 <-> 59050000.sai mapping ok
  403. [ 3.068270] asoc-simple-card sound: ASoC: no DMI vendor name!
  404. [ 3.079439] imx6q-pcie 5f000000.pcie: 5f000000.pcie supply epdev_on not found, using dummy regulator
  405. [ 3.079604] imx8qxp-lpcg-clk 5b260000.clock-controller: ignoring dependency for device, assuming no driver
  406. [ 3.080253] imx6q-pcie 5f010000.pcie: No cache used with register defaults set!
  407. [ 3.089065] imx6q-pcie 5f000000.pcie: No cache used with register defaults set!
  408. [ 3.110041] input: gpio-keys as /devices/platform/gpio-keys/input/input1
  409. [ 3.121183] rtc-ds1307 3-0068: setting system clock to 2021-04-16T06:25:44 UTC (1618554344)
  410. [ 3.136627] ALSA device list:
  411. [ 3.139828] #0: imx-spdif
  412. [ 3.142625] #1: apalis-imx8qm-sgtl5000
  413. [ 3.215624] imx6q-pcie 5f010000.pcie: PCIe PLL locked after 0 us.
  414. [ 3.221983] imx6q-pcie 5f010000.pcie: host bridge /bus@5f000000/pcie@0x5f010000 ranges:
  415. [ 3.230055] imx6q-pcie 5f010000.pcie: IO 0x7ff80000..0x7ff8ffff -> 0x00000000
  416. [ 3.237746] imx6q-pcie 5f010000.pcie: MEM 0x70000000..0x7fefffff -> 0x70000000
  417. [ 3.355622] imx6q-pcie 5f000000.pcie: PCIe PLL locked after 0 us.
  418. [ 3.361819] imx6q-pcie 5f000000.pcie: host bridge /bus@5f000000/pcie@0x5f000000 ranges:
  419. [ 3.370166] imx6q-pcie 5f000000.pcie: IO 0x6ff80000..0x6ff8ffff -> 0x00000000
  420. [ 3.377598] imx6q-pcie 5f000000.pcie: MEM 0x60000000..0x6fefffff -> 0x60000000
  421. [ 3.407628] usb 4-1: new high-speed USB device number 2 using ci_hdrc
  422. [ 3.568846] hub 4-1:1.0: USB hub found
  423. [ 3.572797] hub 4-1:1.0: 2 ports detected
  424. [ 4.235714] imx6q-pcie 5f010000.pcie: Phy link never came up
  425. [ 4.241466] imx6q-pcie 5f010000.pcie: failed to initialize host
  426. [ 4.247458] imx6q-pcie 5f010000.pcie: unable to add pcie port.
  427. [ 4.379863] imx6q-pcie 5f000000.pcie: Phy link never came up
  428. [ 4.385604] imx6q-pcie 5f000000.pcie: failed to initialize host
  429. [ 4.391576] imx6q-pcie 5f000000.pcie: unable to add pcie port.
  430. [ 4.403621] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  431. [ 4.411770] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  432. [ 4.421203] devtmpfs: mounted
  433. [ 4.425674] Freeing unused kernel memory: 2496K
  434. [ 4.435711] Run /sbin/init as init process
  435. [ 4.523561] systemd[1]: systemd 244.5+ running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -)
  436. [ 4.545795] systemd[1]: Detected architecture arm64.
  437.  
  438. Welcome to Manus TDX Wayland with XWayland 5.3.0-devel-20210616104759+build.0 (dunfell)!
  439.  
  440. [ 4.599968] systemd[1]: Set hostname to <apalis-imx8>.
  441. [ 4.607190] systemd[1]: Initializing machine ID from random generator.
  442. [ 4.613888] systemd[1]: Installed transient /etc/machine-id file.
  443. [ 4.879953] systemd[1]: Created slice system-getty.slice.
  444. [ OK ] Created slice system-getty.slice.
  445. [ 4.900697] systemd[1]: Created slice system-serial\x2dgetty.slice.
  446. [ OK ] Created slice system-serial\x2dgetty.slice.
  447. [ 4.924717] systemd[1]: Created slice system-systemd\x2dfsck.slice.
  448. [ OK ] Created slice system-systemd\x2dfsck.slice.
  449. [ 4.949481] systemd[1]: Created slice User and Session Slice.
  450. [ OK ] Created slice User and Session Slice.
  451. [ 4.972150] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  452. [ OK ] Started Dispatch Password �…ts to Console Directory Watch.
  453. [ 4.999937] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  454. [ OK ] Started Forward Password R�…uests to Wall Directory Watch.
  455. [ 5.028191] systemd[1]: Reached target Host and Network Name Lookups.
  456. [ OK ] Reached target Host and Network Name Lookups.
  457. [ 5.051908] systemd[1]: Reached target Paths.
  458. [ OK ] Reached target Paths.
  459. [ 5.071681] systemd[1]: Reached target Remote File Systems.
  460. [ OK ] Reached target Remote File Systems.
  461. [ 5.091735] systemd[1]: Reached target Slices.
  462. [ OK ] Reached target Slices.
  463. [ 5.111951] systemd[1]: Reached target Swap.
  464. [ OK ] Reached target Swap.
  465. [ 5.150614] systemd[1]: Listening on RPCbind Server Activation Socket.
  466. [ OK ] Listening on RPCbind Server Activation Socket.
  467. [ 5.179870] systemd[1]: Reached target RPC Port Mapper.
  468. [ OK ] Reached target RPC Port Mapper.
  469. [ 5.202906] systemd[1]: Listening on Syslog Socket.
  470. [ OK ] Listening on Syslog Socket.
  471. [ 5.214013] systemd[1]: Listening on initctl Compatibility Named Pipe.
  472. [ OK ] Listening on initctl Compatibility Named Pipe.
  473. [ 5.240578] systemd[1]: Listening on Journal Audit Socket.
  474. [ OK ] Listening on Journal Audit Socket.
  475. [ 5.264197] systemd[1]: Listening on Journal Socket (/dev/log).
  476. [ OK ] Listening on Journal Socket (/dev/log).
  477. [ 5.288475] systemd[1]: Listening on Journal Socket.
  478. [ OK ] Listening on Journal Socket.
  479. [ 5.308242] systemd[1]: Listening on Network Service Netlink Socket.
  480. [ OK ] Listening on Network Service Netlink Socket.
  481. [ 5.335977] systemd[1]: Listening on udev Control Socket.
  482. [ OK ] Listening on udev Control Socket.
  483. [ 5.356028] systemd[1]: Listening on udev Kernel Socket.
  484. [ OK ] Listening on udev Kernel Socket.
  485. [ 5.381406] systemd[1]: Mounting Huge Pages File System...
  486. Mounting Huge Pages File System...
  487. [ 5.408611] systemd[1]: Mounting POSIX Message Queue File System...
  488. Mounting POSIX Message Queue File System...
  489. [ 5.436517] systemd[1]: Mounting Kernel Debug File System...
  490. Mounting Kernel Debug File System...
  491. [ 5.466730] systemd[1]: Mounting Temporary Directory (/tmp)...
  492. Mounting Temporary Directory (/tmp)...
  493. [ 5.493940] systemd[1]: Starting Create list of static device nodes for the current kernel...
  494. Starting Create list of st�…odes for the current kernel...
  495. [ 5.523442] systemd[1]: Starting Mender service to grow data partition size...
  496. Starting Mender service to grow data partition size...
  497. [ 5.550596] systemd[1]: Starting RPC Bind...
  498. Starting RPC Bind...
  499. [ 5.570695] systemd[1]: Starting File System Check on Root Device...
  500. Starting File System Check on Root Device...
  501. [ 5.598995] systemd[1]: Starting Journal Service...
  502. 5 Starting Journal Servicem . . .
  503. .607649] systemd[1]: Starting Load Kernel Modules...
  504. Starting Load Kernel[ M o d u5l.e6s1[203m6].. .sy
  505. stemd[1]: Starting udev Coldplug all Devices...
  506. em Starting udev Coldplug [a l l D5e.v6i2c8e4s3[]0 ms.y.s.t
  507. d[1]: Started RPC Bind.
  508. [ m OK5 .6 [500m1]1] S tsyarstteedm d10];:1 ;M3o9unmtRePCd HBiugndeP[a0gm.es File System.
  509.  
  510. [ 5.639934] switch cluster 0 cpu-freq governor to schedutil
  511. i [ O K 5[605m0]7 7M3o]u nstyesdt em0[1;1];: 39MmouHungtee dP PagOeSsI XF iMleess Saygset eQum[u0em .F
  512. le System.
  513. 0 [ O K 56[06m25] 7M7o]u nsytesdt e[d0[;11]:;3 9MmoPuOnStIeXd MKeessrangeel QDueebuueg FFiillee SSyysstteemm[
  514. m.
  515. [ [ O K 5[607m4]5 8M2o]u nstyesdt e[d0[;11];:3 9MmoKuenrtneedl TDeembpuogr aFriyl eD iSryesctteomr[ 0(m/.tmp).
  516.  
  517. c OK ] Mounted Temporary Dir[e c t o r5y. 6(9/9t8m6p1)][s0wmi.t
  518. h cluster 1 cpu-freq governor to schedutil
  519. [ 5.710409] systemd[1]: Started Create list of static device nodes for the current kernel.
  520. [ OK ] Started Create list of sta�… nodes for the current kernel.
  521. [ 5.736210] systemd[1]: Started Journal Service.
  522. [ OK ] Started Journal Service.
  523. [FAILED] Failed to start Mender ser�…e to grow data partition size.
  524. See 'systemctl status mender-grow-data.service' for details.
  525. [ OK ] Started File System Check on Root Device.
  526. [ OK ] Started Load Kernel Modules.
  527. Mounting Kernel Configuration File System...
  528. Starting Remount Root and Kernel File Systems...
  529. [ 5.895049] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  530. Starting Apply Kernel Variables...
  531. [ OK ] Mounted Kernel Configuration File System.
  532. [ OK ] Started Remount Root and Kernel File Systems.
  533. [ OK ] Started Apply Kernel Variables.
  534. Starting Flush Journal to Persistent Storage...
  535. [ 5.998926] systemd-journald[358]: Received client request to flush runtime journal.
  536. Starting Create System Users...
  537. [ OK ] Started Flush Journal to Persistent Storage.
  538. [ OK ] Started Create System Users.
  539. Starting Create Static Device Nodes in /dev...
  540. [ OK ] Started Create Static Device Nodes in /dev.
  541. [ OK ] Reached target Local File Systems (Pre).
  542. Mounting /var/volatile...
  543. Starting udev Kernel Device Manager...
  544. [ OK ] Started udev Coldplug all Devices.
  545. [ OK ] Mounted /var/volatile.
  546. [ OK ] Started udev Kernel Device Manager.
  547. Starting Load/Save Random Seed...
  548. [ OK ] Started Load/Save Random Seed.
  549. [ OK ] Created slice system-systemd\x2dbacklight.slice.
  550. [ 6.366080] [VPU Encoder] enable mu for core[0]
  551. e Starting Load/Save[ S c r ee6n. 3�7�8…3n5e0ss] o[fV PbUa cEknlciogdhetr:]b avcpkul iegnhcto[e0rm .c.o.r
  552. [0] firmware version is 1.3.0
  553. [ OK ] Started Load/Save Screen B�…htness of backlight:backlight.
  554. [ 6.432919] CAN device driver interface
  555. [ 6.437929] mxc-jpeg 58400000.jpegdec: decoder device registered as /dev/video0 (81,2)
  556. [ 6.452979] flexcan 5a8d0000.can: 5a8d0000.can supply xceiver not found, using dummy regulator
  557. OK ] Reached target ; 1 ; 396m.4Ha7r08dw1a5]re mxacct-jivpaegte d58 U4S5B0 0g0a0d.gjepte[e0nmc.:
  558. encoder device registered as /dev/video1 (81,3)
  559. [ 6.495904] flexcan 5a8e0000.can: 5a8e0000.can supply xceiver not found, using dummy regulator
  560. Starting Mender service to grow data partition size...
  561. [FAILED] Failed to start Mender ser�…e to grow data partition size.
  562. See 'systemctl status mender-grow-data.service' for details.
  563. [ OK ] Found device /dev/mmcblk0p1.
  564. Starting File System Check on /dev/mmcblk0p1...
  565. [ OK ] Started File System Check on /dev/mmcblk0p1.
  566. Mounting /uboot...
  567. [ OK ] Mounted /uboot.
  568. [** ] A start job is running for /dev/mmcblk0p4 (28s / 1min 30s)
  569. [ 33.759633] wifi_pwrdn_fake_regulator: disabling
  570. [ TIME ] Timed out waiting for device /dev/mmcblk0p4.
  571. [DEPEND] Dependency failed for File�…ystem Check on /dev/mmcblk0p4.
  572. [DEPEND] Dependency failed for /data.
  573. [DEPEND] Dependency failed for Local File Systems.
  574. [DEPEND] Dependency failed for Grow File System on /data.
  575. [ OK ] Stopped Dispatch Password �…ts to Console Directory Watch.
  576. [ OK ] Stopped Forward Password R�…uests to Wall Directory Watch.
  577. [ OK ] Reached target Timers.
  578. [ OK ] Reached target Sound Card.
  579. [ OK ] Closed Syslog Socket.
  580. [ OK ] Reached target Network (Pre).
  581. [ OK ] Reached target Login Prompts.
  582. Starting Network Service...
  583. [ OK ] Reached target Sockets.
  584. [ OK ] Started Emergency Shell.
  585. [ OK ] Reached target Emergency Mode.
  586. Starting Rebuild Dynamic Linker Cache...
  587. Starting Commit a transient machine-id on disk...
  588. Starting Create Volatile Files and Directories...
  589. [ OK ] Started Network Service.
  590. [ OK ] Started Commit a transient machine-id on disk.
  591. [ OK ] Started Create Volatile Files and Directories.
  592. [ OK ] Reached target Network.
  593. Starting Rebuild Journal Catalog...
  594. Starting Wait for Network to be Configured...
  595. Starting Network Time Synchronization...
  596. Starting Update UTMP about System Boot/Shutdown...
  597. [ OK ] Started Rebuild Dynamic Linker Cache.
  598. [ OK ] Started Network Time Synchronization.
  599. [ OK ] Started Rebuild Journal Catalog.
  600. [ OK ] Reached target System Time Set.
  601. [ OK ] Reached target System Time Synchronized.
  602. Starting Update is Completed...
  603. [ OK ] Started Update UTMP about System Boot/Shutdown.
  604. [ OK ] Started Update is Completed.
  605. Starting Update UTMP about System Runlevel Changes...
  606. [ OK ] Started Update UTMP about System Runlevel Changes.
  607. You are in emergency mode. After logging in, type "journalctl Press Enter for maintenance
  608. (or press Control-D to continue):
  609. ~ #
  610.  
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!