Send: M503
Recv: echo:  G21    ; Units in mm (mm)
Recv: echo:  M149 C ; Units in Celsius
Recv:
Recv: echo:Filament settings: Disabled
Recv: echo:  M200 D1.75
Recv: echo:  M200 D0
Recv: echo:Steps per unit:
Recv: echo: M92 X80.00 Y80.00 Z400.00 E409.00
Recv: echo:Maximum feedrates (units/s):
Recv: echo:  M203 X500.00 Y500.00 Z5.00 E25.00
Recv: echo:Maximum Acceleration (units/s2):
Recv: echo:  M201 X500.00 Y500.00 Z100.00 E5000.00
Recv: echo:Acceleration (units/s2): P<print_accel> R<retract_accel> T<travel_accel>
Recv: echo:  M204 P500.00 R500.00 T500.00
Recv: echo:Advanced: B<min_segment_time_us> S<min_feedrate> T<min_travel_feedrate> J<junc_dev>
Recv: echo:  M205 B20000.00 S0.00 T0.00 J0.08
Recv: echo:Home offset:
Recv: echo:  M206 X0.00 Y-13.00 Z0.00
Recv: echo:Mesh Bed Leveling:
Recv: echo:  M420 S0 Z10.00
Recv: echo:Material heatup parameters:
Recv: echo:  M145 S0 H185 B45 F255
Recv: echo:  M145 S1 H240 B0 F255
Recv: echo:PID settings:
Recv: echo:  M301 P22.20 I1.08 D114.00
Recv: echo:Stepper driver current:
Recv: echo:  M906 X800 Y800 Z800
Recv: echo:  M906 T0 E800
Recv:
Recv: echo:Driver stepping mode:
Recv: echo:  M569 S1 X Y Z
Recv: echo:  M569 S1 T0 E
Recv: ok