API tools faq
paste
Guest User

Untitled

a guest
Mar 20th, 2022
264
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 36.96 KB | None | 0 0
raw download clone embed print report
  1. SPI NOR
  2. ddr init
  3.  
  4. U-Boot 2013.04 (Nov 20 2019 - 14:04:46)
  5.  
  6. CPU : ZX279125@A9,600MHZ
  7. Board: ZTE zx279125evb
  8. I2C: ready
  9. DRAM: 32 MiB
  10. SF: Detected mx25l12805d with page size 64, total 16 MiB
  11. In: serial
  12. Out: serial
  13. Err: serial
  14. Net: eth0
  15.  
  16. Hit 1 to upgrade softwate version
  17. Hit any key to stop autoboot: 0
  18. select=0x1
  19. search=0x2
  20. BootImageNum=0x00000001,1
  21. select = 0x1
  22. read spi flash offset=0x780000, size=0x10f280,please waiting...down.
  23. offset=900000, fs_size=4a0000
  24. ## Booting kernel from Legacy Image at 40600100 ...
  25. Image Name: Linux Kernel Image
  26. Image Type: ARM Linux Kernel Image (lzma compressed)
  27. Data Size: 1110334 Bytes = 1.1 MiB
  28. Load Address: 40008000
  29. Entry Point: 40008000
  30. Verifying Checksum ... OK
  31. Uncompressing Kernel Image ... OK
  32. ----------------------
  33. |-->setup versioninfo tag...
  34.  
  35. Starting kernel ...
  36.  
  37. Linux version 2.6.32.61-EMBSYS-CGEL-4.03.20.P1.F0 (root@A000001) (gcc version 4. 1.2 2011-06-24 ZTE Embsys-TSP V2.08.20_P2) #191 Tue Aug 25 14:47:01 CST 2020
  38. CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=18c53c7d
  39. CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  40. Machine: ZX279125
  41. Memory policy: ECC disabled, Data cache writeback
  42. reserve bmu=b04000, oss=c000, base=414f0000
  43. <io> io address fixed remap finished
  44. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
  45. Kernel command line: console=ttyS0,115200n8 root=/dev/mtdblock8 ro rootfstype=jf fs2 mem=32M
  46. PID hash table entries: 128 (order: -3, 512 bytes)
  47. Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  48. Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  49. Memory: 32MB = 32MB total
  50. Memory: 17632KB available (2827K code, 543K data, 84K init, 0K highmem)
  51. SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  52. Experimental hierarchical RCU implementation.
  53. Experimental hierarchical RCU init done.
  54. NR_IRQS:256
  55. Console: colour dummy device 80x30
  56. Calibrating delay loop... 1196.03 BogoMIPS (lpj=5980160)
  57. Mount-cache hash table entries: 512
  58. CPU: Testing write buffer coherency: ok
  59. NET: Registered protocol family 16
  60. 11930:27:43 [Klogctl][Info] [(1086)LogCtlInit] LogCtlInit begin
  61. 11930:27:43 [Klogctl][Info] [(896)AddLogOutModule] AddLogOutModule:OutputMode=0X 00000200,ptLogProcSet=c1021a98
  62. 11930:27:43 [Klogstdio][Info] [(1058)LogStdioProcInit] LogStdioProcInit
  63.  
  64. LogUdpWatchProcInit
  65. <devices> device resource added
  66. modename:watchdog addr:41ff4000 size:0000c000
  67. dwAddress is 41ff4000 dwLen is 49152
  68. g_pdwWdRsvMemBase is c2810000 g_dwWdRsvMemLen is 40052
  69. magic is the same as last time
  70. g_pdwWdRegTableBase = c2810fb0
  71. : success register character device for /dev/watchdog
  72. zxwdt: heartbeat 2 msec, clock 600000000
  73. dev:uart0: ttyS0 at MMIO 0xf0705000 (irq = 43) is a ZTE UART
  74. zx_uart_console_setup:UART: uart1 set for console!
  75. console [ttyS0] enabled
  76. dev:uart1: ttyS1 at MMIO 0xf0706000 (irq = 42) is a ZTE UART
  77. bio: create slab <bio-0> at 0
  78. Switching to clocksource timer1_clksrc
  79. NET: Registered protocol family 2
  80. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  81. TCP established hash table entries: 1024 (order: 1, 8192 bytes)
  82. TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  83. TCP: Hash tables configured (established 1024 bind 1024)
  84. TCP: reno registered
  85. UDP hash table entries: 256 (order: 0, 4096 bytes)
  86. UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  87. NET: Registered protocol family 1
  88. I2C(info): zx_i2c at 0xf0802000 registered.
  89. pon init
  90. pon clk reset pin mux
  91. pp init
  92. pp net init ok,208/184
  93. switch init
  94. JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
  95. msgmni has been set to 34
  96. io scheduler noop registered
  97. io scheduler cfq registered (default)
  98. loop: module loaded
  99. i2c /dev entries driver
  100. nf_conntrack version 0.5.0 (275 buckets, 1100 max)
  101. ip_tables: (C) 2000-2006 Netfilter Core Team
  102. NET: Registered protocol family 17
  103. Bridge firewalling registered
  104. Ebtables v2.0 registered
  105. PPP generic driver version 2.4.2
  106. NET: Registered protocol family 24
  107. systools version:v0.7.0
  108. mtd.name = ZX9125spifc.0, .size = 0x1000000 (16MiB) .erasesize = 0x00010000 (64K iB) .numeraseregions = 0
  109. Creating 9 MTD partitions on "ZX9125spifc.0":
  110. 0x000000000000-0x000001000000 : "whole flash"
  111. 0x000000000000-0x000000080000 : "uboot"
  112. 0x000000080000-0x000000200000 : "kernel0"
  113. 0x000000780000-0x000000900000 : "kernel1"
  114. 0x000000e80000-0x000000e90000 : "others"
  115. 0x000000e90000-0x000000ea0000 : "parameter tags"
  116. 0x000000ea0000-0x000001000000 : "usercfg"
  117. 0x000000200000-0x000000780000 : "rootfs0"
  118. 0x000000900000-0x000000e80000 : "rootfs1"
  119. VFS: Mounted root (jffs2 filesystem) readonly on device 31:8.
  120. Freeing init memory: 84K
  121. CFS CPU scheduler.
  122. zx_uart_startup:UART: uart1 is set for console!
  123. init started: BusyBox v1.01 (2020.08.25-06:48+0000) multi-call binary
  124. Starting pid 19, console /dev/ttyS0: '/etc/init.d/rcS'
  125. Pre-initialization script ...
  126. Mounting ramdisk at /var
  127. Mounting /dev/mtdblock6 to /userconfig
  128. jffs2_scan_dirent_node(): Node CRC failed on node at 0x001210e8: Read 0xffffffff , calculated 0xfd865d95
  129. Empty flash at 0x0012111c ends at 0x00121200
  130. jffs2_scan_dirent_node(): Name CRC failed on node at 0x001212d8: Read 0x87d4e546 , calculated 0x0d290c3e
  131. Empty flash at 0x0012130c ends at 0x00121400
  132. jffs2_scan_dirent_node(): Name CRC failed on node at 0x001214d8: Read 0x6ff1f217 , calculated 0xcbb2bb01
  133. Empty flash at 0x00121514 ends at 0x00121600
  134. jffs2_scan_inode_node(): CRC failed on node at 0x001216e0: Read 0xffffffff, calc ulated 0xba44d6d7
  135. Empty flash at 0x00121744 ends at 0x00121800
  136. Empty flash at 0x00121908 ends at 0x00121a00
  137. Empty flash at 0x00121b08 ends at 0x00121c00
  138. jffs2_scan_eraseblock(): Node at 0x001266f8 {0x1985, 0xe001, 0x0000003a) has inv alid CRC 0xe0021985 (calculated 0x95835e1c)
  139. jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001266fc: 0x003a in stead
  140. Empty flash at 0x00126d4c ends at 0x00126e00
  141. Empty flash at 0x00127410 ends at 0x00127500
  142. Empty flash at 0x00127b10 ends at 0x00127c00
  143. Empty flash at 0x0012847c ends at 0x00128500
  144. Empty flash at 0x00128764 ends at 0x00128800
  145. Empty flash at 0x00128a64 ends at 0x00128b00
  146. Mount ok!
  147. Configuring MAC interfaces
  148. Bringing up interface lo
  149. Bringing up interface mii0
  150. Set promisc for device mii0
  151. Configuring with no IP address (i.e. for PPP)
  152. <verinfo_module_init>(531)---->verinfo=U-Boot V7.0.10T4 20191120140749 0x780000 0x1 0x82 0x8f
  153. <verinfo_module_init>(536)----><verinfo_module_init>(538)----><verinfo_module_in it>(540)---->GN25L95 found.
  154. .: 14: Can't open /etc/rc.d/init.d/functions
  155. register fpga driver success, major=222
  156. = TM Module SYS FS Init ended successfully =
  157. tm_initModule begin...
  158. [TM][ppglb_set_up_egr_add_crc_ena]input: enable=0
  159. tm_initial successed !!!
  160. tm_initModule end...
  161. ethdriver_init....
  162. g_mii_dev_name[0] sw
  163. g_mii_dev_name[1] pon
  164. Init switch module
  165. zy uni num:1
  166. [SW][sw_init_switch] alarm init
  167. [yqs]set cpu queue rate limit to 800pps
  168. Init switch module Success
  169. === LowPower Module Initial Begin ====
  170. = LP Module SYS FS Init ended successfully =
  171. === LowPower Module Initial End ====
  172. zteGpmac_initModule begin...
  173. ERROR: (chip_zx279100/kmodule/sdk/gmac/core/src/zteGponOnuInit.c:218) Onu Mac Ra m Init Timeout
  174. === GponMac Supported MaxTcont: 16 MaxPLI: 800B ===
  175. ##huoqf zteGponAsicStarttimeChkResultInit write cfg=10
  176. ##huoqf zteGponAsicStarttimeChkResultInit read cfg=10
  177. = PON Module Operate ended successfully =
  178. create zteGpon_rei_task ok!
  179. = GMAC Module SYS FS Init ended successfully =
  180. zteGpmac_initModule end...
  181. zx279100_gpon_Init ok
  182. GN25L95 found.
  183. bsp_i2c_probe 0x50 success!
  184. vendor name = ZTE_B+_G
  185. optical PN(0x60) =
  186. optical PN(0x28) = GN25L95
  187. ===================================================================
  188. region code:144
  189. region name:SPAINDIGI
  190. USER_CFG is same as ETC_CFG, donot need copy
  191. ===================================================================
  192. Database default setting is [current : 144]
  193. Starting pid 178, console /dev/ttyS0: '/sbin/getty'
  194.  
  195. F601
  196. 00:00:01 [bsp_mgr][Error] [bsp_mgr.c(158)BspMgrInit] BspMgr INIT_SUCCESS
  197. 00:00:02 [DB][Error] [dbc_def_dev_inf(391)dbPersonInitVer] get VENDOR_ID from f lash failed !
  198. 00:00:02 [DB][Error] [dbc_mgr_def.c(75)dbMgrStaticSetI] not find table (PDTWLANW API)
  199. vid not found.
  200. 00:00:02 [DB][Error] [dbc_def_board_i(519)dbDefBoardInfo] GetBoardTypeFlag faile d!
  201. 00:00:02 [DB][Error] [dbc_def_gponcfg(81)dbDefGPONCFG] get RegisterID from flas h failed !
  202. 00:00:03 [DB][Error] [dbc_core_compat(876)dbUserInfoTrans] not find table
  203. 00:00:03 [DB][Error] [dbc_core.c(432)dbInitSrTidCfg] get val error from VOIPExt.
  204. 00:00:04 [log_mgr][Emerg] [log_mgr.c(909)logSetSaveEnabl] Log configure change:[ LogFunction] Log SaveFile Service Stop Success!
  205. 00:00:04 [log_mgr][Emerg] [log_mgr.c(974)logSetSaveLevel] Log configure change:[ LogFunction] Log SaveFile LogLevel is Set 4!
  206. ########br's FDB_MAX[256]
  207. ethdrv_dev_ioctl ,brdev_set.port_id 0 ,brdev_set.name eth0 ,brdev_set.flag 0
  208. o7_flag = 0,arg_o7_Flag->ctl=0
  209. === GponMac Supported MaxTcont: 8 MaxPLI: 1536B ===
  210. 00:00:05 [pon_mgr][Error] [pon_gpon_zx2791(508)pon_EqdCtrl_ini] GetTagParam(TAG_ ID_GPON_MAX_SN_ID) error -1
  211. [yqs]l_regionCode 144
  212. recv EV_NORMAL_START
  213. >>>>>>>>>>>> >>>>>>>>>>>>gpon_omci start successed!<<<<<<<<<<<<<<<<<<<<<<<<<<<
  214. vendor name = Z TE_B+_G
  215. optical PN(0x60) =
  216. optical PN(0x28) = GN25L95
  217. mac 1 phy status changed: 1000M full-duplex
  218. 00:00:08 [OSS_fw_test][Error] [oss_common.c(480)ASEND] [fwupgrademgr][00900101] Send task Message[0X2612] to [00000000] in SocketAsynSendMsg() ERROR !
  219. device et h0 entered promiscuous mode
  220. br0: port 1(eth0) entered forwarding state
  221. br0: port 1(eth0) entered forwarding state
  222. <LOGID000000004>00:00:09 [KIGMPSNP][Error] [br_multicast_se(858)set_trap_unknow] port0 trap_unknow_report_en is 0!
  223. <LOGID000000004>00:00:09 [KIGMPSNP][Error] [br_multicast_se(901)set_multicast_t] portNum = 0, tagstripe = 0
  224. ====================gpon_omci start======================
  225. ==========================sys process start=========================
  226. Omci get Byte Order is Little-Endian
  227. g_bByteSort(0)
  228. =====================omci sender process start=====================
  229. Process_Perf's Event(4352) is not support !!
  230. =========================omci process start=========================
  231. OA_Sysdrv_GetTcontBufferSize: value(0) is out of range, use def value:256
  232. [OA_Mng_Event_Cfg] Event (0x05010033) no found!
  233. [OA_Chip_Mng_Event_CallBack]Call pFucMngExec ucRet=2
  234. g_MeCtr_Configure=0x00000000,g_MeCtr_CreateMark1=0x00000000,g_MeCtr_CreateMark2 =0x00000000
  235. [OA_Mng_Event_Cfg] Event (0x0500000c) no found!
  236. [OA_Chip_Mng_Event_CallBack]Call pFucMngExec ucRet=2
  237. OA_Pondrv_GetTcontMax result:0 tcontmax:7
  238. OA_Pondrv_GetTcontQueueMax result:0 tcontqueuemax:8
  239. [GoldenSea]TcontID[1], policy:0, pqinfo:0
  240. [GoldenSea]TcontID[2], policy:0, pqinfo:0
  241. [GoldenSea]TcontID[3], policy:0, pqinfo:0
  242. [GoldenSea]TcontID[4], policy:0, pqinfo:0
  243. [GoldenSea]TcontID[5], policy:0, pqinfo:0
  244. [GoldenSea]TcontID[6], policy:0, pqinfo:0
  245. [GoldenSea]TcontID[7], policy:0, pqinfo:0
  246. Open /proc/capability/battery fail
  247. 00:00:10 [omci][Error] [pon_baseinfo_cm(506)cmGetUPSInfo] cmGetUPSInfo: Get upsO nline error!
  248. Call cmGPonGetUPSInfo error, iRet = -257
  249. [OA_Chip_Mng_Event_CallBack]Call pFucMngExec ucRet=255
  250. [FWPM]cmFwListPm ret = 1
  251. [FWIP]pInstList.dwCount = 0
  252. [FWSC]pInstList.dwCount = 0
  253. Sub_SNOntStaticDB:Don't create meclass:329!
  254. Sub_SNOntStaticDB:Don't create meclass:350!
  255. power status is 0x0!!!
  256. [LHP]Update loid_authencation state wResult 0 G_ONU_REG_Authenstates 0
  257. [OA_Mng_Event_Cfg] Event (0x05010029) no found!
  258. [OA_Chip_M[ADAPTER]set gpon up!!!
  259. ng_Event_CallBac====EVENT_O7_STATE_SAVE OFF====
  260. k]Call pFucMngExereg state change: o1 ==> o2
  261. c ucRet=2
  262. ##Get management vlan about Hreg state change: o2 ==> o1
  263. G failed!##-zhanreg state change: o1 ==> o2
  264. gyc
  265. [OA_Mng_Event_Cfg] Event (0x0501002a) no found!
  266. [OA_Chip_Mng_Event_CallBack]Call pFucMngExec ucRet=2
  267. step into Clear_All_Dot1ag_MA
  268. step into Clear_All_Dot1ag_MD
  269. [OA_Mng_Event_Cfg] Event (0x03000012) no found!
  270. [OA_Chip_Mng_Event_CallBack]Call pFucMngExec ucRet=2
  271.  
  272. [alecal]ZTE----pon link activate success!
  273. ##O7 STATE 0##!
  274. [LHP]Update loid_authencation state wResult 0 G_ONU_REG_Authensta tes 0
  275. not support alarm event 0x1103.
  276. Process_Perf's Event(4355) is not support !!
  277. reg state change: o2 ==> o3
  278. ===sn send interrupt happened !!===
  279. DB_RECORD_NOT_EXIST2
  280. [OA_manage_eth_link_alarm]GetMacBrPortMeIdFromUniMeId failed
  281. [OA_Mng_Event_Cfg] Event (0x05000033) no found!
  282. [OA_Chip_Mng_Event_CallBack]Call pFucMngExec ucRet=2
  283. ===sn send interrupt happened !!===
  284. ===sn send interrupt happened !!===
  285. reg state change: o3 ==> o4
  286. [LHP]Update loid_authencation state wResult 0 G_ONU_REG_Authenstates 0
  287. ===rg send interrupt happened !!===
  288. reg state change: o4 ==> o5
  289. Set register_authencation state 5
  290. device nbif0 entered promiscuous mode
  291. br0: port 2(nbif0) entered forwarding state
  292. br0: port 2(nbif0) entered forwarding state
  293. Set register_authencation state 1
  294. 00:00:13 [OSS_cspd][Error] [oss_common.c(314)OSSSendAckData] [Cfm_Mgr]OSSSendAck Data[9613] wAckLen = 48 wAckBuffLen = 0 [sender = 00010135]!!!
  295. Open /proc/capab ility/battery fail
  296. 00:00:15 [omci][Error] [pon_baseinfo_cm(506)cmGetUPSInfo] cmGetUPSInfo: Get upsO nline error!
  297. Call cmGPonGetUPSInfo error, iRet = -257
  298. [OA_Chip_Mng_Event_CallBack]Call pFucMngExec ucRet=255
  299. Leaf_perf_process:mecls=24,meid=257, msgtype=4
  300. Leaf_perf_process:mecls=89,meid=257, msgtype=4
  301. Leaf_perf_process:mecls=296,meid=257, msgtype=4
  302. Leaf_perf_process:mecls=312,meid=32769, msgtype=4
  303. Leaf_perf_process:mecls=334,meid=1, msgtype=4
  304. CmEthSetG988Stats success
  305. Leaf_perf_process:mecls=334,meid=2, msgtype=4
  306. CmEthSetG988Stats success
  307. Leaf_perf_process:mecls=425,meid=1, msgtype=4
  308. rule already existCmEthSetG988Stats success
  309. DB_RECORD_NOT_EXIST2
  310. [OA_SysDrv_Mng_Pptp_Uni]GetMacBrPortMeIdFromUniMeId(UNI:257) failed
  311. Leaf_perf_process:mecls=425,meid=2, msgtype=4
  312. rule already existCmEthSetG988Stats success
  313. 00:00:15 [omcitoplat][Error] [dbl_api.c(313)dbAPIGetView] get view failed VID(48 5) VN(IGD.LD1.ETH5) Err(-5)
  314. Leaf_perf_process:mecls=51,meid=1, msgtype=4
  315. Leaf_perf_process:mecls=52,meid=1, msgtype=4
  316. Leaf_perf_process:mecls=341,meid=1, msgtype=4
  317. 00:00:15 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 4 095,does not exist
  318. Call CmPonGetGemStat error,iRet=-6
  319. [OE_mc_gem_iwtp_set_addr_tbl]:write!
  320. usGemPortID=0x0fff,usSecondaryKey=0x0000!
  321. DestIPStart:IPStackVersion 4(224 0 1 0)
  322. DestIPEnd:IPStackVersion 4(239 255 255 255)
  323. [Sub_SNCreateMacBrPortDesData]Sub_SNDBGetAttValueByMask failed:0,type:6
  324. Leaf_perf_process:mecls=52,meid=65535, msgtype=4
  325. [OA_Chip_Mng_Event_CallBack]Call pFucMngExec ucRet=247
  326. [OA_Chip_Mng_Event_CallBack]Call pFucMngExec ucRet=247
  327. [LHP]Clear Old AccessControlTable Settings Port 0
  328. 00:00:15 [multicast_mgr][Error] [multicast_mgr.c(2064)igmpDealCtlMac] igmpAddCtl Mac failed!
  329. Leaf_perf_process:mecls=341,meid=2, msgtype=4
  330. 00:00:15 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 1 042,does not exist
  331. Call CmPonGetGemStat error,iRet=-6
  332. [Sub_SNCreateMacBrPortDesData]Sub_SNDBGetAttValueByMask failed:0,type:3
  333. Leaf_perf_process:mecls=52,meid=2, msgtype=4
  334. Leaf_perf_process:mecls=341,meid=3, msgtype=4
  335. 00:00:15 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 1 242,does not exist
  336. Call CmPonGetGemStat error,iRet=-6
  337.  
  338. __ratelimit: 877 callbacks suppressed
  339. [LHP]Need Set IPv4MulFilter 0
  340. Leaf_perf_process:mecls=256,meid=0, msgtype=24
  341. 00:00:16 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 1 042,does not exist
  342. Call CmPonGetGemStat error,iRet=-6
  343. 00:00:16 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 1 042,does not exist
  344. Call CmPonGetGemStat error,iRet=-6
  345. 00:00:16 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  346. Call CmPonGetGemStat error,iRet=-6
  347. 00:00:16 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 1 242,does not exist
  348. Call CmPonGetGemStat error,iRet=-6
  349. Leaf_perf_process:mecls=256,meid=0, msgtype=24
  350. 00:00:16 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 1 042,does not exist
  351. Call CmPonGetGemStat error,iRet=-6
  352. 00:00:16 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 1 042,does not exist
  353. Call CmPonGetGemStat error,iRet=-6
  354. 00:00:16 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  355. Call CmPonGetGemStat error,iRet=-6
  356. 00:00:16 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 1 242,does not exist
  357. Call CmPonGetGemStat error,iRet=-6
  358. 00:00:20 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 1 042,does not exist
  359. Call CmPonGetGemStat error,iRet=-6
  360. 00:00:20 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 1 042,does not exist
  361. Call CmPonGetGemStat error,iRet=-6
  362. 00:00:20 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  363. Call CmPonGetGemStat error,iRet=-6
  364. 00:00:20 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 1 242,does not exist
  365. Call CmPonGetGemStat error,iRet=-6
  366. Calpath ...
  367. ExExExExEx - Step Into Omci Adapter!
  368. [Omci_Hash_Icb_Deregister] error1
  369. Gpon Aes encrypted gemportID (1042) valid (1)
  370. Gpon Aes encrypted gemportID (1242) valid (1)
  371. __ratelimit: 98 callbacks suppressed
  372. 00:00:25 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  373. [Cfg_Tcont]TcontId(1)AllocId(298)[Cfg_Tcont]TcontId(2)AllocId(810 )Call CmPonGetGemStat error,iRet=-6
  374. 00:00:30 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  375. Call CmPonGetGemStat error,iRet=-6
  376. 00:00:35 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  377. Call CmPonGetGemStat error,iRet=-6
  378. 00:00:40 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  379. Call CmPonGetGemStat error,iRet=-6
  380. [yqs]disable cpu queue rate limit
  381. 00:00:45 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  382. Call CmPonGetGemStat error,iRet=-6
  383. 00:00:50 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  384. Call CmPonGetGemStat error,iRet=-6
  385. 00:00:55 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  386. Call CmPonGetGemStat error,iRet=-6
  387. 00:01:00 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  388. Call CmPonGetGemStat error,iRet=-6
  389. 00:01:05 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  390. Call CmPonGetGemStat error,iRet=-6
  391. 00:01:10 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  392. Call CmPonGetGemStat error,iRet=-6
  393. 00:01:15 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  394. Call CmPonGetGemStat error,iRet=-6
  395. 00:01:20 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  396. Call CmPonGetGemStat error,iRet=-6
  397. 00:01:25 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  398. Call CmPonGetGemStat error,iRet=-6
  399. 00:01:30 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  400. Call CmPonGetGemStat error,iRet=-6
  401. 00:01:35 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  402. Call CmPonGetGemStat error,iRet=-6
  403. 00:01:40 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  404. Call CmPonGetGemStat error,iRet=-6
  405. 00:01:45 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  406. Call CmPonGetGemStat error,iRet=-6
  407. 00:01:50 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  408. Call CmPonGetGemStat error,iRet=-6
  409. 00:01:55 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  410. Call CmPonGetGemStat error,iRet=-6
  411. 00:02:00 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  412. Call CmPonGetGemStat error,iRet=-6
  413. 00:02:05 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  414. Call CmPonGetGemStat error,iRet=-6
  415. 00:02:10 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  416. Call CmPonGetGemStat error,iRet=-6
  417. 00:02:15 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  418. Call CmPonGetGemStat error,iRet=-6
  419. 00:02:20 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  420. Call CmPonGetGemStat error,iRet=-6
  421. 00:02:25 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  422. Call CmPonGetGemStat error,iRet=-6
  423. 00:02:30 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  424. Call CmPonGetGemStat error,iRet=-6
  425. 00:02:35 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  426. Call CmPonGetGemStat error,iRet=-6
  427. 00:02:40 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  428. Call CmPonGetGemStat error,iRet=-6
  429. 00:02:45 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  430. Call CmPonGetGemStat error,iRet=-6
  431. 00:02:50 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  432. Call CmPonGetGemStat error,iRet=-6
  433. 00:02:55 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  434. Call CmPonGetGemStat error,iRet=-6
  435. 00:03:00 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  436. Call CmPonGetGemStat error,iRet=-6
  437. 00:03:05 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  438. Call CmPonGetGemStat error,iRet=-6
  439. 00:03:10 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  440. Call CmPonGetGemStat error,iRet=-6
  441. 00:03:15 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  442. Call CmPonGetGemStat error,iRet=-6
  443. 00:03:20 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  444. Call CmPonGetGemStat error,iRet=-6
  445. 00:03:25 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  446. Call CmPonGetGemStat error,iRet=-6
  447. 00:03:30 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  448. Call CmPonGetGemStat error,iRet=-6
  449. 00:03:35 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  450. Call CmPonGetGemStat error,iRet=-6
  451. 00:03:40 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  452. Call CmPonGetGemStat error,iRet=-6
  453. 00:03:45 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  454. Call CmPonGetGemStat error,iRet=-6
  455. 00:03:50 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  456. Call CmPonGetGemStat error,iRet=-6
  457. 00:03:55 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  458. Call CmPonGetGemStat error,iRet=-6
  459. 00:04:00 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  460. Call CmPonGetGemStat error,iRet=-6
  461. 00:04:05 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  462. Call CmPonGetGemStat error,iRet=-6
  463. 00:04:10 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  464. Call CmPonGetGemStat error,iRet=-6
  465. 00:04:15 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  466. Call CmPonGetGemStat error,iRet=-6
  467. 00:04:20 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  468. Call CmPonGetGemStat error,iRet=-6
  469. 00:04:25 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  470. Call CmPonGetGemStat error,iRet=-6
  471. 00:04:30 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  472. Call CmPonGetGemStat error,iRet=-6
  473. 00:04:35 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  474. Call CmPonGetGemStat error,iRet=-6
  475. 00:04:40 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  476. Call CmPonGetGemStat error,iRet=-6
  477. 00:04:45 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  478. Call CmPonGetGemStat error,iRet=-6
  479. 00:04:50 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  480. Call CmPonGetGemStat error,iRet=-6
  481. 00:04:55 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  482. Call CmPonGetGemStat error,iRet=-6
  483. 00:05:00 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  484. Call CmPonGetGemStat error,iRet=-6
  485. 00:05:05 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  486. Call CmPonGetGemStat error,iRet=-6
  487. 00:05:10 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  488. Call CmPonGetGemStat error,iRet=-6
  489. 00:05:15 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  490. Call CmPonGetGemStat error,iRet=-6
  491. 00:05:20 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0 ,does not exist
  492. Call CmPonGetGemStat error,iRet=-6
  493. 00:05:25 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0,does not exist
  494. Call CmPonGetGemStat error,iRet=-6
  495. 00:05:30 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0,does not exist
  496. Call CmPonGetGemStat error,iRet=-6
  497. 00:05:35 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0,does not exist
  498. Call CmPonGetGemStat error,iRet=-6
  499. 00:05:40 [perform][Error] [pon_gpon_zx2791(232)CmPonGetGemport] the GemPort ID 0,does not exist
  500. Call CmPonGetGemStat error,iRet=-6
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!