Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- random: getrandom() support available
- Configuration file: hostapd.conf
- nl80211: Supported cipher 00-0f-ac:1
- nl80211: Supported cipher 00-0f-ac:5
- nl80211: Supported cipher 00-0f-ac:2
- nl80211: Supported cipher 00-0f-ac:4
- nl80211: Supported cipher 00-0f-ac:6
- nl80211: interface wlan1 in phy phy1
- nl80211: Set mode ifindex 4 iftype 3 (AP)
- nl80211: Setup AP(wlan1) - device_ap_sme=1 use_monitor=0
- nl80211: Subscribe to mgmt frames with AP handle 0x7f5f50 (device SME)
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7f5f50 match=04
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7f5f50 match=0501
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7f5f50 match=0503
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7f5f50 match=0504
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7f5f50 match=06
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7f5f50 match=08
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7f5f50 match=09
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7f5f50 match=0a
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7f5f50 match=11
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7f5f50 match=12
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7f5f50 match=7f
- nl80211: Register frame type=0xb0 (WLAN_FC_STYPE_AUTH) nl_handle=0x7f5f50 match=
- nl80211: Enable Probe Request reporting nl_preq=0x7fae90
- nl80211: Register frame type=0x40 (WLAN_FC_STYPE_PROBE_REQ) nl_handle=0x7fae90 match=
- rfkill: initial event: idx=1 type=1 op=0 soft=0 hard=0
- nl80211: Add own interface ifindex 4 (ifidx_reason -1)
- nl80211: if_indices[16]: 4(-1)
- phy: phy1
- BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits)
- wlan1: interface state UNINITIALIZED->COUNTRY_UPDATE
- Previous country code JP, new country code JP
- nl80211: Regulatory information - country=JP (DFS-JP)
- nl80211: 2402-2482 @ 40 MHz 20 mBm
- nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM)
- nl80211: 4910-4990 @ 40 MHz 23 mBm
- nl80211: 5170-5250 @ 80 MHz 20 mBm
- nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS)
- nl80211: 5490-5710 @ 160 MHz 23 mBm (DFS)
- nl80211: 57000-66000 @ 2160 MHz 10 mBm
- nl80211: Added 802.11b mode based on 802.11g information
- nl80211: Mode IEEE 802.11g: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484
- nl80211: Mode IEEE 802.11a: 5180 5200 5220 5240 5260[RADAR] 5280[RADAR] 5300[RADAR] 5320[RADAR] 5500[RADAR] 5520[RADAR] 5540[RADAR] 5560[RADAR] 5580[RADAR] 5600[RADAR] 5620[RADAR] 5640[RADAR] 5660[RADAR] 5680[RADAR]
- nl80211: Mode IEEE 802.11b: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484
- Allowed channel: mode=1 chan=1 freq=2412 MHz max_tx_power=20 dBm
- Allowed channel: mode=1 chan=2 freq=2417 MHz max_tx_power=20 dBm
- Allowed channel: mode=1 chan=3 freq=2422 MHz max_tx_power=20 dBm
- Allowed channel: mode=1 chan=4 freq=2427 MHz max_tx_power=20 dBm
- Allowed channel: mode=1 chan=5 freq=2432 MHz max_tx_power=20 dBm
- Allowed channel: mode=1 chan=6 freq=2437 MHz max_tx_power=20 dBm
- Allowed channel: mode=1 chan=7 freq=2442 MHz max_tx_power=20 dBm
- Allowed channel: mode=1 chan=8 freq=2447 MHz max_tx_power=20 dBm
- Allowed channel: mode=1 chan=9 freq=2452 MHz max_tx_power=20 dBm
- Allowed channel: mode=1 chan=10 freq=2457 MHz max_tx_power=20 dBm
- Allowed channel: mode=1 chan=11 freq=2462 MHz max_tx_power=20 dBm
- Allowed channel: mode=1 chan=12 freq=2467 MHz max_tx_power=20 dBm
- Allowed channel: mode=1 chan=13 freq=2472 MHz max_tx_power=20 dBm
- Allowed channel: mode=1 chan=14 freq=2484 MHz max_tx_power=20 dBm
- Allowed channel: mode=2 chan=36 freq=5180 MHz max_tx_power=20 dBm
- Allowed channel: mode=2 chan=40 freq=5200 MHz max_tx_power=20 dBm
- Allowed channel: mode=2 chan=44 freq=5220 MHz max_tx_power=20 dBm
- Allowed channel: mode=2 chan=48 freq=5240 MHz max_tx_power=20 dBm
- Allowed channel: mode=2 chan=149 freq=5745 MHz max_tx_power=0 dBm
- Allowed channel: mode=2 chan=153 freq=5765 MHz max_tx_power=168 dBm
- Allowed channel: mode=2 chan=157 freq=5785 MHz max_tx_power=24 dBm
- Allowed channel: mode=2 chan=161 freq=5805 MHz max_tx_power=136 dBm
- Allowed channel: mode=2 chan=165 freq=5825 MHz max_tx_power=248 dBm
- Allowed channel: mode=2 chan=169 freq=5845 MHz max_tx_power=104 dBm
- Allowed channel: mode=2 chan=173 freq=5865 MHz max_tx_power=216 dBm
- Allowed channel: mode=2 chan=177 freq=5885 MHz max_tx_power=72 dBm
- Allowed channel: mode=0 chan=1 freq=2412 MHz max_tx_power=20 dBm
- Allowed channel: mode=0 chan=2 freq=2417 MHz max_tx_power=20 dBm
- Allowed channel: mode=0 chan=3 freq=2422 MHz max_tx_power=20 dBm
- Allowed channel: mode=0 chan=4 freq=2427 MHz max_tx_power=20 dBm
- Allowed channel: mode=0 chan=5 freq=2432 MHz max_tx_power=20 dBm
- Allowed channel: mode=0 chan=6 freq=2437 MHz max_tx_power=20 dBm
- Allowed channel: mode=0 chan=7 freq=2442 MHz max_tx_power=20 dBm
- Allowed channel: mode=0 chan=8 freq=2447 MHz max_tx_power=20 dBm
- Allowed channel: mode=0 chan=9 freq=2452 MHz max_tx_power=20 dBm
- Allowed channel: mode=0 chan=10 freq=2457 MHz max_tx_power=20 dBm
- Allowed channel: mode=0 chan=11 freq=2462 MHz max_tx_power=20 dBm
- Allowed channel: mode=0 chan=12 freq=2467 MHz max_tx_power=20 dBm
- Allowed channel: mode=0 chan=13 freq=2472 MHz max_tx_power=20 dBm
- Allowed channel: mode=0 chan=14 freq=2484 MHz max_tx_power=20 dBm
- Completing interface initialization
- Mode: IEEE 802.11b Channel: 14 Frequency: 2484 MHz
- DFS 0 channels required radar detection
- nl80211: Set freq 2484 (ht_enabled=0, vht_enabled=0, he_enabled=0, bandwidth=20 MHz, cf1=2484 MHz, cf2=0 MHz)
- * freq=2484
- * he_enabled=0
- * vht_enabled=0
- * ht_enabled=0
- * channel_type=0
- RATE[0] rate=10 flags=0x1
- RATE[1] rate=20 flags=0x1
- RATE[2] rate=55 flags=0x0
- RATE[3] rate=110 flags=0x0
- hostapd_setup_bss(hapd=0x7f4aa8 (wlan1), first=1)
- nl80211: flush -> DEL_STATION wlan1 (all)
- wpa_driver_nl80211_set_key: ifindex=4 (wlan1) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
- wpa_driver_nl80211_set_key: ifindex=4 (wlan1) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
- wpa_driver_nl80211_set_key: ifindex=4 (wlan1) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
- wpa_driver_nl80211_set_key: ifindex=4 (wlan1) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
- Using interface wlan1 with hwaddr 4c:ed:fb:b7:07:d9 and ssid "14"
- nl80211: Set beacon (beacon_set=0)
- nl80211: Beacon head - hexdump(len=49): 80 00 00 00 ff ff ff ff ff ff 4c ed fb b7 07 d9 4c ed fb b7 07 d9 00 00 00 00 00 00 00 00 00 00 64 00 01 00 00 02 31 34 01 04 82 84 0b 16 03 01 0e
- nl80211: Beacon tail - hexdump(len=6): 7f 04 00 00 00 02
- nl80211: ifindex=4
- nl80211: beacon_int=100
- nl80211: beacon_rate=0
- nl80211: rate_type=0
- nl80211: dtim_period=2
- nl80211: ssid=14
- * beacon_int=100
- * dtim_period=2
- nl80211: hidden SSID not in use
- nl80211: privacy=0
- nl80211: auth_algs=0x3
- nl80211: wpa_version=0x0
- nl80211: key_mgmt_suites=0x4
- nl80211: pairwise_ciphers=0x0
- nl80211: group_cipher=0x1
- nl80211: beacon_ies - hexdump(len=6): 7f 04 00 00 00 02
- nl80211: proberesp_ies - hexdump(len=6): 7f 04 00 00 00 02
- nl80211: assocresp_ies - hexdump(len=6): 7f 04 00 00 00 02
- wlan1: Deauthenticate all stations at BSS start
- nl80211: sta_remove -> DEL_STATION wlan1 ff:ff:ff:ff:ff:ff --> -22 (Invalid argument)
- nl80211: Set wlan1 operstate 0->1 (UP)
- netlink: Operstate: ifindex=4 linkmode=-1 (no change), operstate=6 (IF_OPER_UP)
- nl80211: TX queue param set: queue=0 aifs=1 cw_min=3 cw_max=7 burst_time=15 --> res=0
- nl80211: TX queue param set: queue=1 aifs=1 cw_min=7 cw_max=15 burst_time=30 --> res=0
- nl80211: TX queue param set: queue=2 aifs=3 cw_min=15 cw_max=63 burst_time=0 --> res=0
- nl80211: TX queue param set: queue=3 aifs=7 cw_min=15 cw_max=1023 burst_time=0 --> res=0
- nl80211: Set Deny ACL (num_mac_acl=0)
- wlan1: interface state COUNTRY_UPDATE->ENABLED
- wlan1: AP-ENABLED
- wlan1: Setup of interface done.
- ctrl_iface not configured!
Advertisement
Add Comment
Please, Sign In to add comment