Tektronix DPO2014 Firmware upgrade log

U-Boot 1.1.4 (Oct 29 2008 - 14:14:00) Tektronix, Inc. V1.01

CPU:   MPC870ZPnn at 133.333 MHz: 8 kB I-Cache 8 kB D-Cache FEC present
Board: Tektronix Fusion MPC870 Main Board
  Version: 4 (QUAL) 4 channel  DPO
  Tek0001A ChipId:      0x1400c
  Tek0001A SubBlocksId: 0x0
  Tek0001B ChipId:      0x1400c
  Tek0001B SubBlocksId: 0x0
  CPLD Version:         0x11
I2C:   ready
DRAM:  64 MB
FLASH: 32 MB
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   FEC ETHERNET
Enter password - autobooting in 3 seconds
## Booting image at efec0000 ...
   Image Name:   Linux-2.4.20_mvl31-885ads
   Image Type:   PowerPC Linux Multi-File Image (gzip compressed)
   Data Size:    1278107 Bytes =  1.2 MB
   Load Address: 00000000
   Entry Point:  00000000
   Contents:
   Image 0:   868895 Bytes = 848.5 kB
   Image 1:   409199 Bytes = 399.6 kB
   Verifying Checksum ... OK
   Uncompressing Multi-File Image ... OK
cmdline is console=ttyS0,115200 quiet bigphysarea=9350 panic=2 root=/dev/mtdblock4 rw mem=175190k  NO_option_board
   Loading Ramdisk to 03e3a000, end 03e9de6f ... OK
No option module board found
Checking for firmware update...
Mounted /dev/sda1 as /mnt/sda1
Checking md5sum...
fwUpdate.sh: OK
md5sum check passed, continuing...
Firmware update script found in image. Executing script...
Checking kernel version...
kernel version installed is greater than 0.29
Firmware platform check passed.
Using dispBmp
override.txt found.  Firmware will be installed.
Checking platform...
Warning: Bad CRC, using default environment
## Error: "model" not defined
I'm a DPO!
  - kernel.img found.
  - filesystem.tar.gz found.
  - bootloader.img found.
  - comparing versions...
V1.01
V1.01
installed bootloader is equal or newer. Skipping.
  - splash.img found.
  - splashmso.img found.
  - route66_fp.s19 found.
    Front panel version file contents -  Fusion FP 0 19 1
  - fwEnvUpdate.sh found.
Update files were found.  Checking file integrity, please wait...
Running: /usr/bin/md5sum -c < md5sum.txt
bootloader.img: OK
dispBmp: OK
dispBmp.old: OK
filesystem.tar.gz: OK
firmware_complete4.bmp: OK
firmware_update4.bmp: OK
fwEnvUpdate.sh: OK
fwUpdate.sh: OK
getPlatform: OK
kernel.img: OK
kernelMin: OK
rebootCmd: OK
route66_fp.s19: OK
route66_fp_version.txt: OK
splash.img: OK
splashmso.img: OK
uBootExtract: OK
md5sum check passed for all files, continuing...
Performing update in 15 seconds...
(The front panel will be updated during the next powerup.)
Flashing splash.img... DO NOT TURN OFF THE SYSTEM!!!!
  - Erasing flash; this may take a while...
Erasing 256 Kibyte @ 0 --  0 % complete.
  - Writing to flash; this may take a while...
Finished updating splash screen.
Flashing kernel.img... DO NOT TURN OFF THE SYSTEM!!!!
  - Erasing flash; this may take a while...
Erasing 256 Kibyte @ 100000 -- 80 % complete.
  - Writing to flash; this may take a while...
Finished updating kernel.
Updating filesystem... DO NOT TURN OFF THE SYSTEM!!!!
Extracting the contents of /usr/local/perm...
  - Erasing flash... this may take a while.
Erasing 256 Kibyte @ 1880000 -- 98 % complete.
  - Writing to flash; this may take a while...
Copying back in /usr/local/perm...
  - Finishing up; this may take a while...
Finished updating filesystem.
Updating environment variables...
Warning: Bad CRC, using default environment
Warning: Bad CRC, using default environment
## Error: "romargs" not defined
Warning: Bad CRC, using default environment
## Error: "big" not defined
Warning: Bad CRC, using default environment
## Error: "reserve" not defined
Warning: Bad CRC, using default environment
Segmentation fault
Warning: Bad CRC, using default environment
Segmentation fault
Warning: Bad CRC, using default environment
Segmentation fault
Warning: Bad CRC, using default environment
Segmentation fault
Finished updating environment variables.
Update is complete. Please power cycle your instrument now.