//Rendezvous with space station from initial orbit of 210x400 km
clearscreen.
set pi to 3.1415926535897932384626433832795028841971693993751058209749445923.
set mu to 3.986*(10^14).
ag1 off.
rcs on.
sas off.
gear off.
set ship:control:neutralize to true.
lock steering to prograde + r(0,0,180).
set target to "LIESS".
print "Awaiting AG1".
wait until ag1.
ag1 off.
unlock steering.
sas on.

//I found that the initial orbit gains on the space station at 10 degrees
//per orbit.
set ang to 239485239.
Until ang < 15 {
  print "Please wait. Circularization will occur when".
  print "initial phasing is complete".
  set ang to vang(ship:body:position,(target:position+ship:body:position)).
  print "Loop ends at zero: "+round(100*(ang-15)).
  wait 0.1.
  clearscreen.
}
set warp to 0.
print "Circularizing at Apogee".
if ship:verticalspeed > 0 {
  wait until ship:verticalspeed<0.
} else {
  wait until ship:verticalspeed>0.
  wait until ship:verticalspeed<0.
}

//Circularizing
set kpv to 1. //to control the vertical speed to keep it at zero
sas off.
lock steering to prograde + r(0,0,180).
set ship:control:fore to 1. //burn
set shipA to 0.
set targetA to 29483924832.
set A0 to ship:altitude.
until ship:apoapsis>(A0+500) {
  print "Burning".
  wait 0.1.
  clearscreen.
  set ship:control:top to (kpv*ship:verticalspeed). //Controlling vertical speed
}
set ship:control:neutralize to true.
print "Circularized at "+round(.5*(ship:apoapsis+ship:periapsis))+" meters".

print "Awaiting AG1".
wait until ag1.
ag1 off.
unlock steering.
sas on.

//second phasing orbit. This one gains on the space station at about 2.5 degrees
//per orbit (400x400)
set ang to 100000.
Until ang < 2.5 {
  print "Please wait. Transfer will occur when".
  print "secondary phasing is complete".
  set ang to vang(ship:body:position,(target:position+ship:body:position)).
  print "Loop ends at zero: "+round(100*(ang-2.5)).
  wait 0.1.
  clearscreen.
}

print "Awaiting Station Apsis".
set warp to 0.
//the two spacecraft have a very low angular difference, so when the station is
//at an apsis, the spacecraft is approximately at that apsis. Burning at this
//point gives the chaser a similar argument of perigee
wait until abs(target:verticalspeed<0.1).
sas off.
lock steering to prograde + r(0,0,180).
print "Initiating Hohmann Transfer to 5km below Station Orbit".
set ship:control:fore to 1.

//stops burn when chaser apogee is at either target apogee or perigee
if abs(target:altitude-target:periapsis)<1000 {
  wait until ship:apoapsis>(target:apoapsis-4750).
} else {
  wait until ship:apoapsis>(target:periapsis-4750).
}
set ship:control:neutralize to true.
print "Transfer Burn Complete".
print "Awaiting AG1".
wait until ag1.
ag1 off.
unlock steering.
sas on.
clearscreen.
//stops at just below 5km
until (target:altitude-ship:altitude)<5075 {
  print "Awaiting Apogee".
  print "Loop ends at zero: "+round((target:altitude-ship:altitude)-5075).
  wait 0.1.
  clearscreen.
}
set warp to 0.
clearscreen.
print "Awaiting AG1".
wait until ag1.
ag1 off.
run fivekm.