API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jan 16th, 2021
55
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.59 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 5.4.74 (ubuntu@ip-172-31-27-145) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r15115-760952ad02)) #0 Fri Dec 4 15:35:50 2020
  2. [ 0.000000] printk: bootconsole [early0] enabled
  3. [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
  4. [ 0.000000] MIPS: machine is Jangala Get Box
  5. [ 0.000000] SoC: Qualcomm Atheros QCA9533 ver 2 rev 0
  6. [ 0.000000] Initrd not found or empty - disabling initrd
  7. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  8. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  9. [ 0.000000] Zone ranges:
  10. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
  11. [ 0.000000] Movable zone start for each node
  12. [ 0.000000] Early memory node ranges
  13. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
  14. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
  15. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480
  16. [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
  17. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
  18. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
  19. [ 0.000000] Writing ErrCtl register=00000000
  20. [ 0.000000] Readback ErrCtl register=00000000
  21. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  22. [ 0.000000] Memory: 122196K/131072K available (4819K kernel code, 193K rwdata, 1112K rodata, 1228K init, 196K bss, 8876K reserved, 0K cma-reserved)
  23. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  24. [ 0.000000] NR_IRQS: 51
  25. [ 0.000000] random: get_random_bytes called from start_kernel+0x32c/0x518 with crng_init=0
  26. [ 0.000000] CPU clock: 650.000 MHz
  27. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5880801374 ns
  28. [ 0.000009] sched_clock: 32 bits at 325MHz, resolution 3ns, wraps every 6607641598ns
  29. [ 0.008893] Calibrating delay loop... 431.10 BogoMIPS (lpj=862208)
  30. [ 0.043880] pid_max: default: 32768 minimum: 301
  31. [ 0.049307] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  32. [ 0.057619] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  33. [ 0.071760] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  34. [ 0.082909] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
  35. [ 0.090806] pinctrl core: initialized pinctrl subsystem
  36. [ 0.098098] NET: Registered protocol family 16
  37. [ 0.141290] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
  38. [ 0.156943] clocksource: Switched to clocksource MIPS
  39. [ 0.164236] NET: Registered protocol family 2
  40. [ 0.170253] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
  41. [ 0.179862] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
  42. [ 0.188585] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
  43. [ 0.196614] TCP: Hash tables configured (established 1024 bind 1024)
  44. [ 0.204031] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
  45. [ 0.211538] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
  46. [ 0.219896] NET: Registered protocol family 1
  47. [ 0.224942] PCI: CLS 0 bytes, default 32
  48. [ 0.234867] workingset: timestamp_bits=14 max_order=15 bucket_order=1
  49. [ 0.250537] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  50. [ 0.257237] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  51. [ 0.289569] pinctrl-single 1804002c.pinmux: 576 pins, size 72
  52. [ 0.297453] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  53. [ 0.305661] printk: console [ttyS0] disabled
  54. [ 0.310649] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 1562500) is a 16550A
  55. [ 0.320471] printk: console [ttyS0] enabled
  56. [ 0.320471] printk: console [ttyS0] enabled
  57. [ 0.329535] printk: bootconsole [early0] disabled
  58. [ 0.329535] printk: bootconsole [early0] disabled
  59. [ 0.357283] spi-nor spi0.0: w25q128 (16384 Kbytes)
  60. [ 0.362336] 6 fixed-partitions partitions found on MTD device spi0.0
  61. [ 0.368912] Creating 6 MTD partitions on "spi0.0":
  62. [ 0.373888] 0x000000000000-0x000000040000 : "u-boot"
  63. [ 0.380298] 0x000000040000-0x000000050000 : "u-boot-env"
  64. [ 0.387019] 0x000000050000-0x000000800000 : "firmware"
  65. [ 0.397051] 2 uimage-fw partitions found on MTD device firmware
  66. [ 0.403229] Creating 2 MTD partitions on "firmware":
  67. [ 0.408395] 0x000000000000-0x0000001f0000 : "kernel"
  68. [ 0.414645] 0x0000001f0000-0x0000007b0000 : "rootfs"
  69. [ 0.421042] mtd: device 4 (rootfs) set to be root filesystem
  70. [ 0.429318] 1 squashfs-split partitions found on MTD device rootfs
  71. [ 0.435797] 0x0000006f0000-0x0000007b0000 : "rootfs_data"
  72. [ 0.442572] 0x000000800000-0x000000fb0000 : "firmware-b"
  73. [ 0.449385] 0x000000fb0000-0x000000ff0000 : "persist"
  74. [ 0.455816] 0x000000ff0000-0x000001000000 : "art"
  75. [ 0.464369] libphy: Fixed MDIO Bus: probed
  76. [ 0.810045] ag71xx 19000000.eth: Could not connect to PHY device. Deferring probe.
  77. [ 1.129551] random: fast init done
  78. [ 1.449393] libphy: ag71xx_mdio: probed
  79. [ 1.454984] libphy: ar8xxx-mdio: probed
  80. [ 1.468883] switch0: Atheros AR8229 rev. 1 switch registered on mdio.0
  81. [ 1.516900] ag71xx 1a000000.eth: connected to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY]
  82. [ 1.527048] eth0: Atheros AG71xx at 0xba000000, irq 5, mode: gmii
  83. [ 1.533686] i2c /dev entries driver
  84. [ 1.537577] ath79-wdt 18060008.wdt: unable to register misc device, err=-16
  85. [ 1.544847] ath79-wdt: probe of 18060008.wdt failed with error -16
  86. [ 1.553973] NET: Registered protocol family 10
  87. [ 1.565773] Segment Routing with IPv6
  88. [ 1.569793] NET: Registered protocol family 17
  89. [ 1.574504] 8021q: 802.1Q VLAN Support v1.8
  90. [ 1.579910] PCI host bridge /ahb/pcie-controller@180c0000 ranges:
  91. [ 1.586339] MEM 0x0000000010000000..0x0000000013ffffff
  92. [ 1.591752] IO 0x0000000000000000..0x0000000000000000
  93. [ 1.696838] ar724x-pci 180c0000.pcie-controller: PCIe link is down
  94. [ 1.703465] PCI host bridge to bus 0000:00
  95. [ 1.707760] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
  96. [ 1.714869] pci_bus 0000:00: root bus resource [io 0x0000]
  97. [ 1.720638] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
  98. [ 1.727664] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  99. [ 1.736721] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
  100. [ 2.063062] ag71xx 19000000.eth: connected to PHY at mdio.0:1f:04 [uid=004dd042, driver=Generic PHY]
  101. [ 2.073724] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode: mii
  102. [ 2.087716] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
  103. [ 2.104413] Freeing unused kernel memory: 1228K
  104. [ 2.109126] This architecture does not have kernel memory protection.
  105. [ 2.115786] Run /sbin/init as init process
  106. [ 2.818654] init: Console is alive
  107. [ 2.822687] init: - watchdog -
  108. [ 4.171321] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  109. [ 4.353696] usbcore: registered new interface driver usbfs
  110. [ 4.359560] usbcore: registered new interface driver hub
  111. [ 4.365205] usbcore: registered new device driver usb
  112. [ 4.379645] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  113. [ 4.388386] ehci-fsl: Freescale EHCI Host controller driver
  114. [ 4.396545] ehci-platform: EHCI generic platform driver
  115. [ 4.402396] ehci-platform 1b000000.usb: EHCI Host Controller
  116. [ 4.408351] ehci-platform 1b000000.usb: new USB bus registered, assigned bus number 1
  117. [ 4.416602] ehci-platform 1b000000.usb: irq 3, io mem 0x1b000000
  118. [ 4.436971] ehci-platform 1b000000.usb: USB 2.0 started, EHCI 1.00
  119. [ 4.444487] hub 1-0:1.0: USB hub found
  120. [ 4.449030] hub 1-0:1.0: 1 port detected
  121. [ 4.457371] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  122. [ 4.475520] init: - preinit -
  123. [ 4.950411] usb 1-1: new high-speed USB device number 2 using ehci-platform
  124. [ 5.203765] random: procd: uninitialized urandom read (4 bytes read)
  125. [ 5.211045] hub 1-1:1.0: USB hub found
  126. [ 5.217437] hub 1-1:1.0: 4 ports detected
  127. [ 5.517038] usb 1-1.3: new full-speed USB device number 3 using ehci-platform
  128. [ 5.656915] random: jshn: uninitialized urandom read (4 bytes read)
  129. [ 5.718780] random: jshn: uninitialized urandom read (4 bytes read)
  130. [ 5.733075] usb 1-1.3: new high-speed USB device number 4 using ehci-platform
  131. [ 6.303503] urandom_read: 3 callbacks suppressed
  132. [ 6.303514] random: jshn: uninitialized urandom read (4 bytes read)
  133. [ 6.458853] random: jshn: uninitialized urandom read (4 bytes read)
  134. [ 6.520401] random: jshn: uninitialized urandom read (4 bytes read)
  135. [ 7.412306] eth0: link up (1000Mbps/Full duplex)
  136. [ 7.425896] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  137. Press the [f] key and hit [enter] to enter failsafe mode
  138. Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  139. [ 11.729874] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
  140. [ 11.742138] urandom-seed: Seed file not found (/etc/urandom.seed)
  141. [ 11.865327] eth0: link down
  142. [ 11.885080] procd: - early -
  143. [ 11.888215] procd: - watchdog -
  144. Failed to connect to ubus
  145. [ 12.636424] procd: - watchdog -
  146. [ 12.642821] procd: - ubus -
  147. [ 12.886198] procd: - init -
  148. Please press Enter to activate this console.
  149. [ 14.887710] kmodloader: loading kernel modules from /etc/modules.d/*
  150. [ 15.131785] urngd: v1.0.2 started.
  151. [ 15.235660] Mirror/redirect action on
  152. [ 15.277122] u32 classifier
  153. [ 15.279934] input device check on
  154. [ 15.283762] Actions configured
  155. [ 15.325486] usbcore: registered new interface driver cdc_wdm
  156. [ 15.342655] Loading modules backported from Linux version v5.8-0-gbcf876870b95
  157. [ 15.350221] Backport generated by backports.git v5.8-1-0-g79400d9e
  158. [ 15.487224] xt_time: kernel timezone is -0000
  159. [ 15.571923] random: crng init done
  160. [ 15.575498] random: 1 urandom warning(s) missed due to ratelimiting
  161. [ 15.709018] PPP generic driver version 2.4.2
  162. [ 15.723289] NET: Registered protocol family 24
  163. [ 15.742600] qmi_wwan 1-1.3:1.4: cdc-wdm0: USB WDM device
  164. [ 15.762143] qmi_wwan 1-1.3:1.4 wwan0: register 'qmi_wwan' at usb-1b000000.usb-1.3, WWAN/QMI device, 16:a7:45:fa:57:97
  165. [ 15.773463] usbcore: registered new interface driver qmi_wwan
  166. [ 16.076273] ieee80211 phy0: Atheros AR9531 Rev:2 mem=0xb8100000, irq=13
  167. [ 16.181550] kmodloader: done loading kernel modules from /etc/modules.d/*
  168.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!