samicko

dmesg

May 23rd, 2019
192
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. root@UZ3EG:~# dmesg
  2. [ 0.000000] Booting Linux on physical CPU 0x0
  3. [ 0.000000] Linux version 4.14.0-rt1-xilinx-v2018.3 (oe-user@oe-host) (gcc version 7.3.0 (GCC)) #1 SMP PREEMPT RT Thu May 23 04:40:39 UTC 2019
  4. [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
  5. [ 0.000000] Machine model: xlnx,zynqmp
  6. [ 0.000000] earlycon: cdns0 at MMIO 0x00000000ff000000 (options '115200n8')
  7. [ 0.000000] bootconsole [cdns0] enabled
  8. [ 0.000000] efi: Getting EFI parameters from FDT:
  9. [ 0.000000] efi: UEFI not found.
  10. [ 0.000000] cma: Reserved 256 MiB at 0x000000006fc00000
  11. [ 0.000000] On node 0 totalpages: 515840
  12. [ 0.000000] DMA zone: 8188 pages used for memmap
  13. [ 0.000000] DMA zone: 0 pages reserved
  14. [ 0.000000] DMA zone: 515840 pages, LIFO batch:31
  15. [ 0.000000] psci: probing for conduit method from DT.
  16. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  17. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  18. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  19. [ 0.000000] percpu: Embedded 22 pages/cpu @ffffffc07fe69000 s50240 r8192 d31680 u90112
  20. [ 0.000000] pcpu-alloc: s50240 r8192 d31680 u90112 alloc=22*4096
  21. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  22. [ 0.000000] Detected VIPT I-cache on CPU0
  23. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  24. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 507652
  25. [ 0.000000] Kernel command line: earlycon clk_ignore_unused root=/dev/mmcblk1p2 rw rootwait uio_pdrv_genirq.of_id=generic-uio
  26. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  27. [ 0.000000] Dentry cache hash table entries: 262144 (order: 10, 4194304 bytes)
  28. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  29. [ 0.000000] Memory: 1745300K/2063360K available (10492K kernel code, 730K rwdata, 3268K rodata, 512K init, 2271K bss, 55916K reserved, 262144K cma-reserved)
  30. [ 0.000000] Virtual kernel memory layout:
  31. [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
  32. [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
  33. [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008ac0000 ( 10496 KB)
  34. [ 0.000000] .rodata : 0xffffff8008ac0000 - 0xffffff8008e00000 ( 3328 KB)
  35. [ 0.000000] .init : 0xffffff8008e00000 - 0xffffff8008e80000 ( 512 KB)
  36. [ 0.000000] .data : 0xffffff8008e80000 - 0xffffff8008f36a00 ( 731 KB)
  37. [ 0.000000] .bss : 0xffffff8008f36a00 - 0xffffff800916e850 ( 2272 KB)
  38. [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
  39. [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
  40. [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
  41. [ 0.000000] 0xffffffbf00000000 - 0xffffffbf01ffc000 ( 31 MB actual)
  42. [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc07ff00000 ( 2047 MB)
  43. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  44. [ 0.000000] Preemptible hierarchical RCU implementation.
  45. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  46. [ 0.000000] RCU priority boosting: priority 1 delay 500 ms.
  47. [ 0.000000] No expedited grace period (rcu_normal_after_boot).
  48. [ 0.000000] Tasks RCU enabled.
  49. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  50. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  51. [ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
  52. [ 0.000000] GIC: Using split EOI/Deactivate mode
  53. [ 0.000000] arch_timer: cp15 timer(s) running at 99.99MHz (phys).
  54. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x171015c90f, max_idle_ns: 440795203080 ns
  55. [ 0.000004] sched_clock: 56 bits at 99MHz, resolution 10ns, wraps every 4398046511101ns
  56. [ 0.000230] Console: colour dummy device 80x25
  57. [ 0.278350] console [tty0] enabled
  58. [ 0.278352] bootconsole [cdns0] disabled
  59. [ 0.278386] Calibrating delay loop (skipped), value calculated using timer frequency.. 199.99 BogoMIPS (lpj=399996)
  60. [ 0.278392] pid_max: default: 32768 minimum: 301
  61. [ 0.278515] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  62. [ 0.278528] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  63. [ 0.292209] ASID allocator initialised with 65536 entries
  64. [ 0.308197] Hierarchical SRCU implementation.
  65. [ 0.332545] EFI services will not be available.
  66. [ 0.332577] zynqmp_plat_init Platform Management API v1.1
  67. [ 0.332590] zynqmp_plat_init Trustzone version v1.0
  68. [ 0.340258] smp: Bringing up secondary CPUs ...
  69. [ 0.380393] Detected VIPT I-cache on CPU1
  70. [ 0.380427] CPU1: Booted secondary processor [410fd034]
  71. [ 0.420457] Detected VIPT I-cache on CPU2
  72. [ 0.420477] CPU2: Booted secondary processor [410fd034]
  73. [ 0.460535] Detected VIPT I-cache on CPU3
  74. [ 0.460554] CPU3: Booted secondary processor [410fd034]
  75. [ 0.460614] smp: Brought up 1 node, 4 CPUs
  76. [ 0.460667] SMP: Total of 4 processors activated.
  77. [ 0.460679] CPU features: detected feature: 32-bit EL0 Support
  78. [ 0.460695] CPU: All CPU(s) started at EL2
  79. [ 0.460716] alternatives: patching kernel code
  80. [ 0.461453] devtmpfs: initialized
  81. [ 0.468575] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  82. [ 0.468607] futex hash table entries: 1024 (order: 5, 131072 bytes)
  83. [ 0.475616] xor: measuring software checksum speed
  84. [ 0.512670] 8regs : 2109.000 MB/sec
  85. [ 0.552687] 8regs_prefetch: 1882.000 MB/sec
  86. [ 0.592725] 32regs : 2592.000 MB/sec
  87. [ 0.632764] 32regs_prefetch: 2179.000 MB/sec
  88. [ 0.632777] xor: using function: 32regs (2592.000 MB/sec)
  89. [ 0.633053] pinctrl core: initialized pinctrl subsystem
  90. [ 0.634262] NET: Registered protocol family 16
  91. [ 0.635907] cpuidle: using governor menu
  92. [ 0.636646] vdso: 2 pages (1 code @ ffffff8008ac6000, 1 data @ ffffff8008e84000)
  93. [ 0.636673] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  94. [ 0.638108] DMA: preallocated 256 KiB pool for atomic allocations
  95. [ 0.661773] reset_zynqmp reset-controller: Xilinx zynqmp reset driver probed
  96. [ 0.662921] ARM CCI_400_r1 PMU driver probed
  97. [ 0.671511] zynqmp-pinctrl ff180000.pinctrl: zynqmp pinctrl initialized
  98. [ 0.702536] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  99. [ 0.769218] raid6: int64x1 gen() 366 MB/s
  100. [ 0.837171] raid6: int64x1 xor() 407 MB/s
  101. [ 0.905345] raid6: int64x2 gen() 626 MB/s
  102. [ 0.973357] raid6: int64x2 xor() 552 MB/s
  103. [ 1.041423] raid6: int64x4 gen() 955 MB/s
  104. [ 1.109490] raid6: int64x4 xor() 680 MB/s
  105. [ 1.177600] raid6: int64x8 gen() 897 MB/s
  106. [ 1.245663] raid6: int64x8 xor() 683 MB/s
  107. [ 1.313791] raid6: neonx1 gen() 666 MB/s
  108. [ 1.381817] raid6: neonx1 xor() 778 MB/s
  109. [ 1.449921] raid6: neonx2 gen() 1070 MB/s
  110. [ 1.517964] raid6: neonx2 xor() 1106 MB/s
  111. [ 1.586044] raid6: neonx4 gen() 1377 MB/s
  112. [ 1.654089] raid6: neonx4 xor() 1320 MB/s
  113. [ 1.722194] raid6: neonx8 gen() 1510 MB/s
  114. [ 1.790239] raid6: neonx8 xor() 1406 MB/s
  115. [ 1.790252] raid6: using algorithm neonx8 gen() 1510 MB/s
  116. [ 1.790263] raid6: .... xor() 1406 MB/s, rmw enabled
  117. [ 1.790275] raid6: using neon recovery algorithm
  118. [ 1.791939] SCSI subsystem initialized
  119. [ 1.792001] libata version 3.00 loaded.
  120. [ 1.792205] usbcore: registered new interface driver usbfs
  121. [ 1.792263] usbcore: registered new interface driver hub
  122. [ 1.792359] usbcore: registered new device driver usb
  123. [ 1.792457] media: Linux media interface: v0.10
  124. [ 1.792501] Linux video capture interface: v2.00
  125. [ 1.792558] pps_core: LinuxPPS API ver. 1 registered
  126. [ 1.792570] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  127. [ 1.792601] PTP clock support registered
  128. [ 1.792638] EDAC MC: Ver: 3.0.0
  129. [ 1.793239] zynqmp-ipi ff9905c0.mailbox: Probed ZynqMP IPI Mailbox driver.
  130. [ 1.793536] FPGA manager framework
  131. [ 1.793711] fpga-region fpga-full: FPGA Region probed
  132. [ 1.793949] Advanced Linux Sound Architecture Driver Initialized.
  133. [ 1.794351] Bluetooth: Core ver 2.22
  134. [ 1.794394] NET: Registered protocol family 31
  135. [ 1.794406] Bluetooth: HCI device and connection manager initialized
  136. [ 1.794427] Bluetooth: HCI socket layer initialized
  137. [ 1.794444] Bluetooth: L2CAP socket layer initialized
  138. [ 1.794484] Bluetooth: SCO socket layer initialized
  139. [ 1.806035] clocksource: Switched to clocksource arch_sys_counter
  140. [ 1.806170] VFS: Disk quotas dquot_6.6.0
  141. [ 1.806236] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  142. [ 1.813183] NET: Registered protocol family 2
  143. [ 1.813687] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  144. [ 1.813860] TCP bind hash table entries: 16384 (order: 7, 917504 bytes)
  145. [ 1.814957] TCP: Hash tables configured (established 16384 bind 16384)
  146. [ 1.815114] UDP hash table entries: 1024 (order: 5, 131072 bytes)
  147. [ 1.815277] UDP-Lite hash table entries: 1024 (order: 5, 131072 bytes)
  148. [ 1.815652] NET: Registered protocol family 1
  149. [ 1.816035] RPC: Registered named UNIX socket transport module.
  150. [ 1.816049] RPC: Registered udp transport module.
  151. [ 1.816060] RPC: Registered tcp transport module.
  152. [ 1.816071] RPC: Registered tcp NFSv4.1 backchannel transport module.
  153. [ 1.816088] PCI: CLS 0 bytes, default 128
  154. [ 1.816769] hw perfevents: no interrupt-affinity property for /pmu, guessing.
  155. [ 1.817051] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  156. [ 1.818307] audit: initializing netlink subsys (disabled)
  157. [ 1.818429] audit: type=2000 audit(1.812:1): state=initialized audit_enabled=0 res=1
  158. [ 1.818959] workingset: timestamp_bits=46 max_order=19 bucket_order=0
  159. [ 1.828142] NFS: Registering the id_resolver key type
  160. [ 1.828189] Key type id_resolver registered
  161. [ 1.828201] Key type id_legacy registered
  162. [ 1.828220] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  163. [ 1.828258] jffs2: version 2.2. (NAND) \xffffffc2\xffffffa9 2001-2006 Red Hat, Inc.
  164. [ 1.856006] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  165. [ 1.856039] io scheduler noop registered
  166. [ 1.856051] io scheduler deadline registered
  167. [ 1.856196] io scheduler cfq registered (default)
  168. [ 1.856210] io scheduler mq-deadline registered
  169. [ 1.856222] io scheduler kyber registered
  170. [ 1.858639] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
  171. [ 2.859211] xilinx-vdma 80043000.dma: reset timeout, cr 4, sr 0
  172. [ 2.859230] xilinx-vdma 80043000.dma: Reset channel failed
  173. [ 3.859377] xilinx-vdma 80043000.dma: reset timeout, cr 4, sr 0
  174. [ 3.859393] xilinx-vdma 80043000.dma: Reset channel failed
  175. [ 3.859569] xilinx-vdma 80043000.dma: Xilinx AXI DMA Engine Driver Probed!!
  176. [ 3.859895] xilinx-vdma 80040000.dma: Xilinx AXI DMA Engine Driver Probed!!
  177. [ 3.860405] xilinx-vdma 80042000.dma: Xilinx AXI DMA Engine Driver Probed!!
  178. [ 3.860729] xilinx-vdma 80041000.dma: Xilinx AXI DMA Engine Driver Probed!!
  179. [ 3.861225] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
  180. [ 3.861579] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
  181. [ 3.861917] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
  182. [ 3.862329] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
  183. [ 3.862683] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
  184. [ 3.863031] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
  185. [ 3.863383] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
  186. [ 3.863729] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
  187. [ 3.864141] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
  188. [ 3.864478] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
  189. [ 3.864826] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
  190. [ 3.865171] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
  191. [ 3.865513] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
  192. [ 3.865852] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
  193. [ 3.866252] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
  194. [ 3.866600] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
  195. [ 3.910326] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  196. [ 3.916360] cacheinfo: Unable to detect cache hierarchy for CPU 0
  197. [ 3.924431] brd: module loaded
  198. [ 3.931764] loop: module loaded
  199. [ 3.933308] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  200. [ 3.933336] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
  201. [ 3.935031] scsi host0: ahci-ceva
  202. [ 3.935339] scsi host1: ahci-ceva
  203. [ 3.935527] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x100 irq 38
  204. [ 3.935546] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x180 irq 38
  205. [ 3.935906] mtdoops: mtd device (mtddev=name/number) must be supplied
  206. [ 3.937477] m25p80 spi0.0: found n25q256a, expected m25p80
  207. [ 3.937831] m25p80 spi0.0: n25q256a (65536 Kbytes)
  208. [ 3.937862] 3 ofpart partitions found on MTD device spi0.0
  209. [ 3.937874] Creating 3 MTD partitions on "spi0.0":
  210. [ 3.937891] 0x000000000000-0x000001360000 : "boot"
  211. [ 3.938789] 0x000001360000-0x0000013a0000 : "bootenv"
  212. [ 3.939454] 0x0000013a0000-0x000002aa0000 : "kernel"
  213. [ 3.941599] libphy: Fixed MDIO Bus: probed
  214. [ 3.943266] tun: Universal TUN/TAP device driver, 1.6
  215. [ 3.943490] CAN device driver interface
  216. [ 3.944446] macb ff0e0000.ethernet: Not enabling partial store and forward
  217. [ 3.945285] libphy: MACB_mii_bus: probed
  218. [ 3.946000] macb ff0e0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0e0000 irq 30 (00:0a:35:00:22:01)
  219. [ 3.946023] TI DP83867 ff0e0000.ethernet-ffffffff:09: attached PHY driver [TI DP83867] (mii_bus:phy_addr=ff0e0000.ethernet-ffffffff:09, irq=POLL)
  220. [ 3.947173] usbcore: registered new interface driver asix
  221. [ 3.947248] usbcore: registered new interface driver ax88179_178a
  222. [ 3.947296] usbcore: registered new interface driver cdc_ether
  223. [ 3.947348] usbcore: registered new interface driver net1080
  224. [ 3.947397] usbcore: registered new interface driver cdc_subset
  225. [ 3.947445] usbcore: registered new interface driver zaurus
  226. [ 3.947507] usbcore: registered new interface driver cdc_ncm
  227. [ 3.948225] xilinx-axipmon ffa00000.perf-monitor: Probed Xilinx APM
  228. [ 3.948862] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  229. [ 3.948878] ehci-pci: EHCI PCI platform driver
  230. [ 3.949341] usbcore: registered new interface driver cdc_acm
  231. [ 3.949354] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  232. [ 3.949406] usbcore: registered new interface driver uas
  233. [ 3.949464] usbcore: registered new interface driver usb-storage
  234. [ 3.950815] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc0
  235. [ 3.950948] i2c /dev entries driver
  236. [ 3.951820] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 32
  237. [ 3.979651] i2c i2c-0: Added multiplexed i2c bus 1
  238. [ 3.979916] i2c i2c-0: Added multiplexed i2c bus 2
  239. [ 3.979932] pca954x 0-0070: registered 2 multiplexed busses for I2C mux pca9542
  240. [ 3.980155] IR NEC protocol handler initialized
  241. [ 3.980167] IR RC5(x/sz) protocol handler initialized
  242. [ 3.980179] IR RC6 protocol handler initialized
  243. [ 3.980189] IR JVC protocol handler initialized
  244. [ 3.980200] IR Sony protocol handler initialized
  245. [ 3.980211] IR SANYO protocol handler initialized
  246. [ 3.980221] IR Sharp protocol handler initialized
  247. [ 3.980232] IR MCE Keyboard/mouse protocol handler initialized
  248. [ 3.980243] IR XMP protocol handler initialized
  249. [ 3.983335] usbcore: registered new interface driver uvcvideo
  250. [ 3.983349] USB Video Class driver (1.1.1)
  251. [ 3.984191] cdns-wdt fd4d0000.watchdog: Xilinx Watchdog Timer at ffffff800921d000 with timeout 60s
  252. [ 3.984683] cdns-wdt ff150000.watchdog: Xilinx Watchdog Timer at ffffff8009225000 with timeout 10s
  253. [ 3.985050] Bluetooth: HCI UART driver ver 2.3
  254. [ 3.985065] Bluetooth: HCI UART protocol H4 registered
  255. [ 3.985077] Bluetooth: HCI UART protocol BCSP registered
  256. [ 3.985117] Bluetooth: HCI UART protocol LL registered
  257. [ 3.985129] Bluetooth: HCI UART protocol ATH3K registered
  258. [ 3.985141] Bluetooth: HCI UART protocol Three-wire (H5) registered
  259. [ 3.985246] Bluetooth: HCI UART protocol Intel registered
  260. [ 3.985259] Bluetooth: HCI UART protocol QCA registered
  261. [ 3.985315] usbcore: registered new interface driver bcm203x
  262. [ 3.985368] usbcore: registered new interface driver bpa10x
  263. [ 3.985427] usbcore: registered new interface driver bfusb
  264. [ 3.985481] usbcore: registered new interface driver btusb
  265. [ 3.985494] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
  266. [ 3.985571] usbcore: registered new interface driver ath3k
  267. [ 3.985808] EDAC MC: ECC not enabled
  268. [ 3.986613] EDAC DEVICE0: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
  269. [ 3.987661] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1099999 KHz
  270. [ 3.987731] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1199999 KHz
  271. [ 3.988406] sdhci: Secure Digital Host Controller Interface driver
  272. [ 3.988420] sdhci: Copyright(c) Pierre Ossman
  273. [ 3.988430] sdhci-pltfm: SDHCI platform and OF driver helper
  274. [ 4.034125] mmc0: SDHCI controller on ff160000.mmc [ff160000.mmc] using ADMA 64-bit
  275. [ 4.034202] PLL: shutdown
  276. [ 4.034287] PLL: enable
  277. [ 4.086067] mmc1: SDHCI controller on ff170000.mmc [ff170000.mmc] using ADMA 64-bit
  278. [ 4.092827] usbcore: registered new interface driver usbhid
  279. [ 4.092841] usbhid: USB HID core driver
  280. [ 4.094370] zynqmp_r5_remoteproc ff9a0100.zynqmp_r5_rproc: RPU core_conf: split0
  281. [ 4.094407] zynqmp_r5_remoteproc ff9a0100.zynqmp_r5_rproc: IPI resource is not specified.
  282. [ 4.094763] remoteproc remoteproc0: ff9a0100.zynqmp_r5_rproc is available
  283. [ 4.094873] zynqmp_r5_remoteproc ff9a0200.zynqmp_r5_rproc: RPU core_conf: split1
  284. [ 4.094991] zynqmp_r5_remoteproc ff9a0200.zynqmp_r5_rproc: IPI resource is not specified.
  285. [ 4.095340] remoteproc remoteproc1: ff9a0200.zynqmp_r5_rproc is available
  286. [ 4.099859] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
  287. [ 4.100555] usbcore: registered new interface driver snd-usb-audio
  288. [ 4.102239] pktgen: Packet Generator for packet performance testing. Version: 2.75
  289. [ 4.102652] mmc0: new HS200 MMC card at address 0001
  290. [ 4.105018] mmcblk0: mmc0:0001 Q2J55L 7.09 GiB
  291. [ 4.105173] mmcblk0boot0: mmc0:0001 Q2J55L partition 1 16.0 MiB
  292. [ 4.105325] mmcblk0boot1: mmc0:0001 Q2J55L partition 2 16.0 MiB
  293. [ 4.105470] mmcblk0rpmb: mmc0:0001 Q2J55L partition 3 4.00 MiB
  294. [ 4.106754] mmcblk0: p1
  295. [ 4.114728] Netfilter messages via NETLINK v0.30.
  296. [ 4.114777] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
  297. [ 4.114798] nf_tables_compat: (c) 2012 Pablo Neira Ayuso <pablo@netfilter.org>
  298. [ 4.114951] ip_tables: (C) 2000-2006 Netfilter Core Team
  299. [ 4.114980] arp_tables: arp_tables: (C) 2002 David S. Miller
  300. [ 4.115096] Initializing XFRM netlink socket
  301. [ 4.115571] NET: Registered protocol family 10
  302. [ 4.120298] Segment Routing with IPv6
  303. [ 4.120374] ip6_tables: (C) 2000-2006 Netfilter Core Team
  304. [ 4.120602] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  305. [ 4.121105] NET: Registered protocol family 17
  306. [ 4.121132] NET: Registered protocol family 15
  307. [ 4.121180] Bridge firewalling registered
  308. [ 4.121192] Ebtables v2.0 registered
  309. [ 4.121344] can: controller area network core (rev 20170425 abi 9)
  310. [ 4.121529] NET: Registered protocol family 29
  311. [ 4.121543] can: raw protocol (rev 20170425)
  312. [ 4.121556] can: broadcast manager protocol (rev 20170425 t)
  313. [ 4.121574] can: netlink gateway (rev 20170425) max_hops=1
  314. [ 4.121768] Bluetooth: RFCOMM TTY layer initialized
  315. [ 4.121790] Bluetooth: RFCOMM socket layer initialized
  316. [ 4.121817] Bluetooth: RFCOMM ver 1.11
  317. [ 4.121835] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  318. [ 4.121847] Bluetooth: BNEP filters: protocol multicast
  319. [ 4.121865] Bluetooth: BNEP socket layer initialized
  320. [ 4.121877] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  321. [ 4.121895] Bluetooth: HIDP socket layer initialized
  322. [ 4.122195] 9pnet: Installing 9P2000 support
  323. [ 4.122227] Key type dns_resolver registered
  324. [ 4.122830] registered taskstats version 1
  325. [ 4.123729] Btrfs loaded, crc32c=crc32c-generic
  326. [ 4.134159] mmc1: new high speed SDHC card at address e624
  327. [ 4.134673] mmcblk1: mmc1:e624 SM32G 29.7 GiB
  328. [ 4.135793] ff000000.serial: ttyPS0 at MMIO 0xff000000 (irq = 44, base_baud = 6249999) is a xuartps
  329. [ 4.136157] mmcblk1: p1 p2 p3 p4
  330. [ 4.246162] ata2: SATA link down (SStatus 0 SControl 330)
  331. [ 4.248283] ata1: SATA link down (SStatus 0 SControl 330)
  332. [ 5.960829] console [ttyPS0] enabled
  333. [ 5.965133] ff010000.serial: ttyPS1 at MMIO 0xff010000 (irq = 45, base_baud = 6249999) is a xuartps
  334. [ 5.976088] xilinx-psgtr fd400000.zynqmp_phy: Lane:3 type:8 protocol:4 pll_locked:yes
  335. [ 5.984447] PLL: shutdown
  336. [ 5.987184] PLL: shutdown
  337. [ 5.989817] zynqmp_pll_disable() clock disable failed for dpll_int, ret = -13
  338. [ 5.997520] PLL: shutdown
  339. [ 6.001034] zynqmp_pll_set_rate() set divider failed for dpll_int, ret = -13
  340. [ 6.008146] zynqmp_clk_divider_set_rate() set divider failed for pcie_ref_div1, ret = -13
  341. [ 6.016666] PLL: shutdown
  342. [ 6.020491] xilinx-dp-snd-codec fd4a0000.zynqmp-display:zynqmp_dp_snd_codec0: Failed to get required clock freq
  343. [ 6.030618] PLL: shutdown
  344. [ 6.033256] xilinx-dp-snd-codec: probe of fd4a0000.zynqmp-display:zynqmp_dp_snd_codec0 failed with error -22
  345. [ 6.043476] xilinx-dp-snd-pcm zynqmp_dp_snd_pcm0: Xilinx DisplayPort Sound PCM probed
  346. [ 6.051654] xilinx-dp-snd-pcm zynqmp_dp_snd_pcm1: Xilinx DisplayPort Sound PCM probed
  347. [ 6.059840] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: ASoC: CPU DAI (null) not registered
  348. [ 6.069994] OF: graph: no port node found in /amba/zynqmp-display@fd4a0000
  349. [ 6.077175] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  350. [ 6.083785] [drm] No driver support for vblank timestamp query.
  351. [ 6.089822] xlnx-drm xlnx-drm.0: bound fd4a0000.zynqmp-display (ops 0xffffff8008b78b90)
  352. [ 6.125181] PLL: enable
  353. [ 6.254424] Console: switching to colour frame buffer device 240x67
  354. [ 6.279838] zynqmp-display fd4a0000.zynqmp-display: fb0: frame buffer device
  355. [ 6.287390] [drm] Initialized xlnx 1.0.0 20130509 for fd4a0000.zynqmp-display on minor 0
  356. [ 6.295589] zynqmp-display fd4a0000.zynqmp-display: ZynqMP DisplayPort Subsystem driver probed
  357. [ 6.304695] dwc3-of-simple ff9d0000.usb0: dwc3_simple_set_phydata: Can't find usb3-phy
  358. [ 6.313786] dwc3 fe200000.dwc3: stop_host(): INFO: Host already stopped
  359. [ 6.441061] dwc3 fe200000.dwc3: stop_peripheral(): INFO: Peripheral already stopped
  360. [ 6.449118] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  361. [ 6.454667] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  362. [ 6.462842] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x22010010
  363. [ 6.471855] xhci-hcd xhci-hcd.0.auto: irq 60, io mem 0xfe200000
  364. [ 6.477945] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  365. [ 6.484795] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  366. [ 6.492081] usb usb1: Product: xHCI Host Controller
  367. [ 6.497005] usb usb1: Manufacturer: Linux 4.14.0-rt1-xilinx-v2018.3 xhci-hcd
  368. [ 6.504118] usb usb1: SerialNumber: xhci-hcd.0.auto
  369. [ 6.509475] hub 1-0:1.0: USB hub found
  370. [ 6.513283] hub 1-0:1.0: 1 port detected
  371. [ 6.517503] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  372. [ 6.523040] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  373. [ 6.530811] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  374. [ 6.539059] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  375. [ 6.545912] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  376. [ 6.553198] usb usb2: Product: xHCI Host Controller
  377. [ 6.558122] usb usb2: Manufacturer: Linux 4.14.0-rt1-xilinx-v2018.3 xhci-hcd
  378. [ 6.565235] usb usb2: SerialNumber: xhci-hcd.0.auto
  379. [ 6.570583] hub 2-0:1.0: USB hub found
  380. [ 6.574389] hub 2-0:1.0: 1 port detected
  381. [ 6.579206] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: ASoC: CPU DAI (null) not registered
  382. [ 6.591542] rtc_zynqmp ffa60000.rtc: setting system clock to 2019-05-23 05:23:01 UTC (1558588981)
  383. [ 6.600497] of_cfs_init
  384. [ 6.602990] of_cfs_init: OK
  385. [ 6.605941] clk: Not disabling unused clocks
  386. [ 6.610346] ALSA device list:
  387. [ 6.613338] No soundcards found.
  388. [ 6.618995] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities
  389. [ 6.686070] xhci-hcd xhci-hcd.0.auto: remove, state 4
  390. [ 6.691189] usb usb2: USB disconnect, device number 1
  391. [ 6.696929] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered
  392. [ 6.702652] xhci-hcd xhci-hcd.0.auto: remove, state 4
  393. [ 6.707758] usb usb1: USB disconnect, device number 1
  394. [ 6.713576] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
  395. [ 6.723003] dwc3 fe200000.dwc3: stop_peripheral(): INFO: Peripheral already stopped
  396. [ 6.855455] dwc3 fe200000.dwc3: do_b_idle(): ERROR: Failed to set peripheral mode
  397. [ 6.880253] EXT4-fs (mmcblk1p2): recovery complete
  398. [ 6.894082] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
  399. [ 6.905852] VFS: Mounted root (ext4 filesystem) on device 179:34.
  400. [ 6.917609] devtmpfs: mounted
  401. [ 6.924617] Freeing unused kernel memory: 512K
  402. [ 6.994063] dwc3 fe200000.dwc3: stop_peripheral(): INFO: Peripheral already stopped
  403. [ 7.005428] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  404. [ 7.015719] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  405. [ 7.028622] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x22010010
  406. [ 7.041823] xhci-hcd xhci-hcd.0.auto: irq 60, io mem 0xfe200000
  407. [ 7.053708] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  408. [ 7.064498] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  409. [ 7.075376] usb usb1: Product: xHCI Host Controller
  410. [ 7.075382] usb usb1: Manufacturer: Linux 4.14.0-rt1-xilinx-v2018.3 xhci-hcd
  411. [ 7.075385] usb usb1: SerialNumber: xhci-hcd.0.auto
  412. [ 7.075868] hub 1-0:1.0: USB hub found
  413. [ 7.075893] hub 1-0:1.0: 1 port detected
  414. [ 7.076434] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: ASoC: CPU DAI (null) not registered
  415. [ 7.076812] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: ASoC: CPU DAI (null) not registered
  416. [ 7.076935] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  417. [ 7.076946] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  418. [ 7.077003] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  419. [ 7.077092] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  420. [ 7.077096] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  421. [ 7.077099] usb usb2: Product: xHCI Host Controller
  422. [ 7.077103] usb usb2: Manufacturer: Linux 4.14.0-rt1-xilinx-v2018.3 xhci-hcd
  423. [ 7.077106] usb usb2: SerialNumber: xhci-hcd.0.auto
  424. [ 7.077500] hub 2-0:1.0: USB hub found
  425. [ 7.077522] hub 2-0:1.0: 1 port detected
  426. [ 7.077871] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: ASoC: CPU DAI (null) not registered
  427. [ 7.078241] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: ASoC: CPU DAI (null) not registered
  428. [ 7.316831] dwc3 fe200000.dwc3: stop_peripheral(): INFO: Peripheral already stopped
  429. [ 7.450105] usb 1-1: new high-speed USB device number 2 using xhci-hcd
  430. [ 7.558908] EXT4-fs (mmcblk1p3): recovery complete
  431. [ 7.573195] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null)
  432. [ 7.590994] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  433. [ 7.607925] usb 1-1: New USB device found, idVendor=2109, idProduct=2820
  434. [ 7.618135] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  435. [ 7.619742] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  436. [ 7.624544] FAT-fs (mmcblk1p4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  437. [ 7.655916] usb 1-1: Product: USB2.0 Hub
  438. [ 7.664537] usb 1-1: Manufacturer: VIA Labs, Inc.
  439. [ 7.685755] hub 1-1:1.0: USB hub found
  440. [ 7.693210] hub 1-1:1.0: 4 ports detected
  441. [ 7.827432] udevd[2004]: starting version 3.2.2
  442. [ 7.839718] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: ASoC: CPU DAI (null) not registered
  443. [ 7.921103] udevd[2005]: starting eudev-3.2.2
  444. [ 8.039140] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: ASoC: CPU DAI (null) not registered
  445. [ 8.074358] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: ASoC: CPU DAI (null) not registered
  446. [ 8.143644] mali: loading out-of-tree module taints kernel.
  447. [ 8.181187] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: ASoC: CPU DAI (null) not registered
  448. [ 8.390138] Polaris Versions: mapping base address.
  449. [ 8.391465] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: ASoC: CPU DAI (null) not registered
  450. [ 8.407123] Polaris Version Register Module Loaded
  451. [ 8.430080] usb 1-1.1: new low-speed USB device number 3 using xhci-hcd
  452. [ 8.601178] usb 1-1.1: New USB device found, idVendor=413c, idProduct=2107
  453. [ 8.612389] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  454. [ 8.623504] usb 1-1.1: Product: Dell USB Entry Keyboard
  455. [ 8.632493] usb 1-1.1: Manufacturer: Dell
  456. [ 8.652019] input: Dell Dell USB Entry Keyboard as /devices/platform/amba/ff9d0000.usb0/fe200000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:413C:2107.0001/input/input0
  457. [ 8.730807] hid-generic 0003:413C:2107.0001: input: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-xhci-hcd.0.auto-1.1/input0
  458. [ 8.748130] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: ASoC: CPU DAI (null) not registered
  459. [ 8.763390] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: ASoC: CPU DAI (null) not registered
  460. [ 8.890073] usb 1-1.3: new low-speed USB device number 4 using xhci-hcd
  461. [ 9.054093] usb 1-1.3: New USB device found, idVendor=0461, idProduct=4d51
  462. [ 9.064901] usb 1-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
  463. [ 9.076130] usb 1-1.3: Product: DELL Laser Mouse
  464. [ 9.097141] input: DELL Laser Mouse as /devices/platform/amba/ff9d0000.usb0/fe200000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.3/1-1.3:1.0/0003:0461:4D51.0002/input/input1
  465. [ 9.115951] hid-generic 0003:0461:4D51.0002: input: USB HID v1.11 Mouse [DELL Laser Mouse] on usb-xhci-hcd.0.auto-1.3/input0
  466. [ 9.134704] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: ASoC: CPU DAI (null) not registered
  467. [ 9.448938] axidma: axidma_dma.c: axidma_dma_init: 718: DMA: Found 1 transmit channels and 2 receive channels.
  468. [ 9.463167] axidma: axidma_dma.c: axidma_dma_init: 720: VDMA: Found 0 transmit channels and 0 receive channels.
  469. [ 9.478597] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: ASoC: CPU DAI (null) not registered
  470. [ 9.504636] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null)
  471. [ 10.142919] pps pps0: new PPS source ptp0
  472. [ 10.151157] macb ff0e0000.ethernet: gem-ptp-timer ptp clock registered.
  473. [ 10.162126] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  474. [ 12.938908] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  475. [ 13.442694] ctnetlink v0.93: registering with nfnetlink.
  476. [ 14.066206] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
  477. [ 20.253177] Mass Storage Function, version: 2009/09/11
  478. [ 20.253187] LUN: removable file: (no medium)
  479. [ 20.258526] LUN: removable file: (no medium)
  480. [ 20.305663] gadgetfs: USB Gadget filesystem, version 24 Aug 2004
  481. [ 20.312046] udc-core: couldn't find an available UDC - added [g_mass_storage] to list of pending drivers
RAW Paste Data